01 FPRA Datasheet
-
Upload
nicolas-garcia -
Category
Documents
-
view
1.018 -
download
15
Transcript of 01 FPRA Datasheet
FPRA Flexi Power Rectifier
The FPRA is a 6kW output power AC rectifier package made up of three individual 2kW AC/DC power modules operating in a parallel mode configuration. The FPRA also includes a Power Distribution Assembly (PDA), which has a fully integrated battery protection LVD, load/battery circuit breakers, battery current shunt and alarm signals to the BTS EAC interface.
GENERAL
Efficiency >91%
Losses, max <180W
Cooling Fan on each rectifier module
Air flow Back to Front
IP54 (w/o front/rear covers) IP class IP55 (with front/rear covers)
Operating ambient -40°C to +55°C
Storage temperature -45°C to +45°C
Start up temperature -40°C ->
Distribution 5 x 63A (2 for loads, 3 for batteries)
INPUT
240 (US 1-phase) 230 (Europe 1-phase) 202 (Japan 3-phase delta) 3-phase input supported
AC connection & nominal voltages
max 350VAC overvoltage up to 60 seconds
AC range, full power
180VAC to 315VAC
AC range, limited power
80VAC to 180VAC
Frequency range 45Hz to 66Hz
Power factor ≥ 0.95
OUPUT
Nominal voltage -54VDC ± 2V
DC range -40VDC to -58.5VDC
Over voltage protection
-58.5VDC ± 1V
Ripple & noise ≤ 300mV (6kW @ +55°C)
Hold up time ≤ 20mS
Current 37.6A @ -53.3VDC
Main features:
Compact 3U high 19inch wide rectifier module Outdoor IP55 compliant stand alone module Wide operating temperature & voltage range Modular construction for future expansion
MECHANICS (Chassis)
Height 3U
Width 19 inch
559mm (with front/rear covers) Depth 422mm (w/o front/rear covers)
~37kg (fully equipped) Weight ~25kg (bare 3U chassis)
Mounting Vertical/horizontal
MECHANICS (Rectifier module)
Height 100mm
Width 81.8mm
Depth 383.7mm
Weight ~3.9kg
CONTROL AND MONITORING
Controller Integrated in PDA unit
Display LCD type with buttons
System monitoring (local/remote)
Parameter setting Temperature compensation Float/boost charging Alarm relay definition
Functions
Manual/periodic battery test
Interface RJ45