> Washroom Hardware & Accessories - Lincoln Sentry...18 Shower Rose & Hose, Folding Shower Seat,...

METLAM PARTITION HARDWARE

Metlam Partition Hardware> Washroom Hardware & Accessories

/ METLAM PARTITION HARDWARE

Metlam Proud to be Australian OwnedMetlam is proud to be Australian owned and managed. Formed in the mid 1990’s, it has been a progressive

evolution culminating in what is today’s Metlam.

All Metlam products are manufactured to our exacting specifications from both our direct manufacturing

facilities and contract suppliers under strict Quality Control. We only use the highest grade raw materials

relevant to their categories such as #304 stainless steel, zinc die cast alloys sourced from Australia

and nylon from Europe with proven ductility and toughness for our hinge inserts, and where applicable,

electroplated or powder coated product finished to ISO Standards.

METLAM PARTITION HARDWARE / PAGE 3

Contents

04 Concealed Screw Fix Hinges & Complete Kits (Turnbolt)

06 Concealed Screw Fix Hinges & Complete Kits (Slide Lock)

08 Bolt Through Hinges & Complete Kits

10 Project Range – Screw Fix

11 Rods and Bolts, Staple and Face Plates

12 Channel, Handles and Hooks

13 Partition Legs

Washroom/Cubicle Partition Fittings

14 Toilet Roll Holders & Soap Dispenser

15 Paper Dispenser, Hand Dryer, Shelf, Mirror

16 Toilet Grab Rails and Back Rest

17 Shower Grab Rails and Shower/Bed Curtain System

18 Shower Rose & Hose, Folding Shower Seat, Baby Change Station

19 Door Signage

Washroom Accessories


DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS Snap On Covers• Lift Off Hinge• Includes fixing screws• Load Ratings per hinge: 15kg• Sold as an each

Type Sold Code

Right Hand Hinge 1 = 1 Hinge 2-700-001

Left Hand Hinge 1 = 1 Hinge 2-700-006

STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

• 304 Stainless steel, nylon inserts• Stain finish• Lift Off Hinge• Includes fixing screws• Load Rating per hinge: 15kg• Sold as an each

Type Sold Code



BUMPER - CONCEALED SCREW FIX

• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover

Description Sold Code

Bumper - Concealed Screw

1 = 1 Bumper

2-700-031

Concealed Screw Fix

COAT HOOK - CONCEALED SCREW FIX

• Diecast zinc & rubber bumper• Satin chrome finish & ABS snap on covers


Coat Hook - Concealed

1 = 1 Hook 2-700-021


STANDARD LATCH SET - CONCEALED SCREW FIX

• Includes turnbolt (brass), indicator and staple (diecast zinc)

• Satin chrome finish• Concealed screw fixings• Suits 13mm, 18mm and 25mm boards


Standard Latch Set - Concealed Screw

1 = 1 Set 2-700-026

COMPLETE STANDARD PARTITION KIT - CONCEALED SCREW FIX

A B Cor D

D

D

E

Gravity Hinge, Diecast Zinc

Gravity Hinge, Stainless Steel

Coat Hook Turnbolt

Indicator

Staple

Bumper

• Complete washroom partition set includes 2 x Gravity Hinge – concealed screw fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right

hand side (while standing inside the cubicle)

Standard Partition Kit Concealed Screw Fix – Diecast Hinge Type Code

A C D ERight Hand 2-700-036

Left Hand 2-700-037

Standard Partition Kit Concealed Screw Fix – Stainless Steel Hinge Type Code

B C D ERight Hand 2-700-046

Left Hand 2-700-047

Concealed Screw Fix


DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS Snap On Covers• Lift Off Hinge• Includes fixing screws• Load Ratings per hinge: 15kg• Sold as an each

Type Sold Code



STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

• 304 Stainless steel, nylon inserts• Stain finish• Lift Off Hinge• Includes fixing screws• Load Rating per hinge: 15kg• Sold as an each

Type Sold Code







1 = 1 Hook 2-700-021

Concealed Screw Fix

BUMPER - CONCEALED SCREW FIX

• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover


Bumper - Concealed Screw

1 = 1 Bumper

2-700-031


DISABLED ACCESS LATCH SET – CONCEALED SCREW FIX


Disable Access Latch Set – Concealed Screw

1 = 1 Set 2-700-029

COMPLETE DISABLED ACCESS PARTITION KIT – CONCEALED SCREW FIX

A B Cor D

D

D

E


Gravity Hinge, Stainless Steel

Coat Hook Slide Lock

Indicator

Staple

Bumper

• Complete washroom partition set includes 2 x Gravity Hinge – concealed screw fix, Coat Hook, Slide Lock, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side

(while standing inside the cubicle)

Disabled Access Partition Kit Concealed Screw Fix – Diecast Hinge Type Code


Left Hand 2-700-039

Disabled Access Partition Kit Concealed Screw Fix – Stainless Steel Hinge Type Code

B C D ERight Hand 2-700-048

Left Hand 2-700-049

Concealed Screw Fix - Disabled Access

• Includes slide lock, indicator and staple (diecast zinc)• Satin chrome finish & ABS snap on covers• Concealed screw fixings• Complies with Disability Standard AS1428.1• Suits 13mm, 18mm and 25mm boards


Bolt Through FixDIECAST ZINC GRAVITY HINGE OPEN ASSIST – BOLT THROUGH

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish• Open Assist and Lift Off Hinge• Load Ratings per hinge: 15kg• Sold as an each• Supplied with bolts and nuts

Type Sold Code



STAINLESS STEEL SPRING HINGE OPEN ASSIST – BOLT THROUGH

• 304 Stainless steel, nylon inserts• Stain finish• Use for both Right Hand and Hand applications• Open Assist• Load Rating per hinge: 15kg• Sold as an each• Supplied with bolts and nuts

Type Sold Code

Spring Hinge 1 = 1 Hinge 2-700-070





1 = 1 Hook 2-700-021

BUMPER – BOLT THROUGH

• Diecast zinc material & rubber insert• Satin chrome finish


Bumper – Bolt Through1 = 1 Bumper

2-700-075


A B C D

D

D

E

STANDARD LATCH SET – BOLT THROUGH

• Includes turnbolt (brass), indicator (diecast zinc) and staple (brass)

• Satin chrome finish• Concealed screw fixings (turnbolt and indicator)• Bolt through fixing (staple)• Suits 13mm, 18mm & 25mm boards


Standard Latch Set 1 = 1 Set 2-700-027

Bolt Through Fix

COMPLETE STANDARD PARTITION KIT – BOLT THROUGH

or


Spring Hinge, Stainless Steel

Coat Hook Turnbolt

Indicator

Staple

Bumper

• Complete washroom partition set includes 2 x Gravity Hinge – bolt through fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side

(while standing inside the cubicle)

Standard Partition Kit Concealed Screw Fix – Diecast Hinge Type Code


Left Hand 2-700-085

Standard Partition Kit Concealed Screw Fix – Stainless Steel Hinge Type Code

B C D ERight & Left Hand

2-700-090


Project RangeDIECAST ZINC GRAVITY HINGE HOLD OPEN – SCREW FIX

• Diecast zinc, stainless steel shaft, nylon inserts • Hold Open and Lift Off Hinge• Includes fixing screws• Load Ratings per hinge: 15kg• Sold as an each

Type Sold Code



COAT HOOK – CONCEALED SCREW FIX

BUMPER – SCREW FIX

• Diecast zinc material & rubber insert• Satin chrome finish


Bumper – Concealed Screw

1 = 1 Bumper 2-700-030

PROJECT LATCH SET – SCREW FIX

• Includes turnbolt (brass), indicator and staple (diecast zinc)• Satin chrome finish


Standard Latch Set – Concealed Screw

1 = 1 Set 2-700-025



Coat Hook – Concealed

1 = 1 Hook 2-700-021


Rods and Bolts, Staple and Face Plates

EDGE MOUNTED BUMPER

• 304 Stainless steel & rubber insert• Screw fix mounting

Description Code

Edge Mounted Bumper 2-700-120

ACORN NUTS AND ALLTHREAD

• Acorn nut to suit 1/4” rod (bag of 20)• Acorn made from brass in bright nickel finish• Allthread Ø 1/4” x 50mm (bag of 10)• Allthread made from steel in zinc finish


Acorn Nuts 1 Ea = 1 Nut 2-700-340

Allthread Rods 1 Ea = 1 Rod 2-700-330

LIFT OFF STAPLE, LEFT HANDED

• For use with right hand gravity hinge 2-700-000 or 2-700-060

• Brass material• Satin chrome-plated finish• Bolt through fixing

Description Code

Lift Off Staple, Left Handed 2-700-140

LIFT OFF STAPLE, RIGHT HANDED

• For use with left hand gravity hinge 2-700-005 or 2-700-065

• Brass material• Satin chrome-plated finish• Bolt through fixing

Description Code

Lift Off Staple, Right Handed 2-700-150

ADDITIONAL FACE PLATE

• 304 Stainless Steel• 1mm thick for bolt through• Hinge mounting• Sold as set of 4

Description Code

Additional Face Plate 2-700-160

50mm


PARTITION TOP WALL CHANNEL

Suit Board Length X Measurement

Y Measurement Code

13mm board 1800mm 15mm 20mm 2-700-167

13mm board 3600mm 15mm 20mm 2-700-168

18mm board 1800mm 20mm 25mm 2-700-165

18mm board 3600mm 20mm 25mm 2-700-163

PARTITION INSERT CHANNEL

Suit Board Length X Measurement

Y Measurement Code

13mm board 2700mm 12mm 20mm 2-700-166

18mm board 2700mm 17mm 25mm 2-700-169

Ø Length x Height Code

8mm 105mm x 30mm 1-545-522

10mm 105mm x 30mm 1-545-526

HANDLES

HAT AND COAT HOOK

Code

1-490-270

• Chrome plated• 75mm projection

COAT RACK – 5 HOOKS

Code

1-490-272

• Chrome finish• Screws included

Channel, Handles and Hooks

• Satin Chrome finish• 96mm Hole Centre• Required for all ambulant and disabled cubicles

Typical Head Assembly Typical Wall/Partition Assembly

x

y

x

y

L

H

Hole Centre = 96mm


Partition Legs

REBATED SHAFT FOOT (110 SERIES)

SINGLE FIX FOOT (112 SERIES)

DOUBLE FIX FOOT (111 SERIES)

DOUBLE FIX FOOT (122 SERIES)

Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au

Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.

Rebated Shaft Foot AssemblyCode

MaterialFinishFeatures

Specify

110 Series

Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height

Foot Assemblies

Double Fix Foot AssemblyCode


Specify

111 Series


Code


Specify

112 Series


Single Fix Foot Assembly

Code


Specify

122 Series


T Piece Foot Assembly

150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49

Height Adjustments Code

Min 125mm to Max 175mm 2-700-210

Min 175mm to Max 225mm 2-700-220

Min 225mm to Max 275mm 2-700-230

Min 275mm to Max 325mm 2-700-240

• Stainless steel• Off floor system• 50mm adjustment


Min 125mm to Max 175mm 2-700-170

Min 175mm to Max 225mm 2-700-180

Min 225mm to Max 275mm 2-700-190

Min 275mm to Max 325mm 2-700-200




Min 125mm to Max 175mm 2-700-250

Min 175mm to Max 225mm 2-700-260

Min 225mm to Max 275mm 2-700-270

Min 275mm to Max 325mm 2-700-280


Min 125mm to Max 175mm 2-700-290

Min 175mm to Max 225mm 2-700-300

Min 225mm to Max 275mm 2-700-310

Min 275mm to Max 325mm 2-700-320

• Stainless steel• To suit 18mm dividers only• Off floor system• 50mm adjustment

HEAVY DUTY ADJUSTABLE LEGS

• Aluminium & nylon base• Natural anodised finish• Suits 13mm & 18mm board

Type Min Height Max Height Code

150mm 135mm 165mm 2-700-360

165mm 165mm 205mm 2-700-361

200mm 185mm 225mm 2-700-362


Other Partition FittingsTOILET ROLL HOLDER – BASIC

• 304 Stainless Steel• Holds 1 roll of paper

Code

2-700-350

TOILET ROLL HOLDER – SINGLE ROLL

SOAP DISPENSER VERTICAL – STAINLESS STEEL

• 304 Stainless Steel• Holds 1 roll of paper

Code

2-710-000

• 304 Stainless Steel• Black ABS pump button• Concealed fixings• 1.2 litre capacity• Lockable hinged lid (key provided)

Code

2-710-002

• 304 Stainless Steel• Holds 2 rolls of paper

Code

2-710-001

TOILET ROLL HOLDER – TWIN ROLL


PAPER DISPENSER INTERFOLD - STAINLESS STEEL

• 304 Stainless Steel• Concealed fixings• 450 C –Fold or 600 Multi-fold paper towel capacity

Code

2-710-003

ELECTRIC HAND DRYER - STAINLESS STEEL

WASHROOM SHELF - STAINLESS STEEL

WASHROOM MIRROR - STAINLESS STEEL FRAME

• 304 Stainless Steel• High-flow dual air outlets• Motor: 250-500W Brush Type: Dual Ball Bearings,

16,000-29,000 RPM• 95°C auto reset overload• 220-240V, 50Hz, 1000W• DP Rating: IP 24• Warranty: Labour – 3 years and Parts – 5 years

Code

2-710-004

• 304 Stainless Steel• W457mm x H105mm x D128mm• 4 mounting holes – fixings not included

Code

2-710-005

• Frame: 304 Stainless Steel• Mirror: 6mm Glass (Vinyl backed)• Unit secured with Stainless Steel wall brackets• W450mm x H1000mm x D25mm• Fully complies with AS1428.1

Code

2-710-006

Other Partition Fittings


Disability and Ambulant Toilet Hardware

• Right Hand Set Shown• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Includes 300mm rail• Fully compliant with AS1428.1

90° FLUSH MOUNT SIDE WALL & CISTERN GRAB RAIL SET

STRAIGHT RAIL PADDED BACKREST

• 304 Stainless Steel frame and mounts• White padded PVC backrest• Concealed fixings• 20mm adjustable height on backrest• Fully compliant with AS1428.1

Code

2-710-007

Type Code

Right Hand Set 2-710-008

Left Hand Set 2-710-009

376.40

155.5

0

560

376.40

155.5

0

90° FLUSH AMBULANT GRAB RAIL

Code

2-710-054

• 304 Stainless Steel• Rail: Ø32mm• Concealed fixings: Ø78mm• Suits Right Hand or Left Hand installation• Fully compliant with AS1428.1


1600mm1600mm

RH OFFSET FLUSH MOUNT SHOWER GRAB RAIL

LH OFFSET FLUSH MOUNT SHOWER GRAB RAIL

SOAP DISH WITH DRAIN – STAINLESS STEEL

SHOWER/BED CURTAIN TRACK SYSTEM

Shower Hardware

• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1

Code

2-710-014

• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1

Code

2-710-013

• 304 Stainless Steel – satin finish• Concealed fixings• W110mm x H50mm x D108mm

Code

2-710-012

• Anodised Aluminium• Concealed fixings• Components supplied: Track, Ceiling

Suspension Rod, Hooks & Wall Mount Bracket• Full compliant with AS1428.1• 2-710-018 - Shower/Bed Curtain

W3000mm x H2000mm (sold separately)

Product Code

Track System 2-710-017

Shower/Bed Curtain 2-710-018

1000

mm


• Hi-density bacteria resistant polyethylene body

• Stainless Steel hinge• Safety restraining strap fitted with

click lock mechanism• Gas spring design allows one-handed

opening and closing operation• Suitable for up to 20kg use• Size open: W855mm x H560mm x D495mm• Size closed: W855mm x H560mm x D107mm

Code

2-710-021

Shower Hardware & Accessories

METLAM HORIZONTAL BABY CHANGE STATION

• Kit comes with shower head, 2m chrome hose, chrome elbow and grab rail slider

• WELS rating: 3 star or 9 L/min

Code

2-710-015

32MM GRAB RAIL SHOWER KIT

PHENOLIC COMPOUND FOLDING SHOWER SEAT

• 304 Stainless Steel frame• White Phenolic Compound Single Piece

Seat with Black Edging & Drainage Slots• Visible fixings• Fold away lockable support leg• Low profile upright storage position• Fully compliant with AS1428.1• Width 960mm

Code

2-710-016


Signage• Available in either vinyl (blue with white print) or 304 stainless steel• Braille markings• Many more options available

Male Shower Female Shower Accessible Shower Cleaner

W200 x H150mm W200 x H150mm W200 x H150mm W150 x H150mm

Vinyl Code Vinyl Code Vinyl Code Vinyl Code

2-710-046 2-710-048 2-710-050 2-710-052

Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code

2-710-047 2-710-049 2-710-051 2-710-053

Baby Change Parents Room RH Female Accessible Toilet LH Female Accessible Toilet



2-710-022 2-710-044 2-710-040 2-710-042


2-710-023 2-710-045 2-710-041 2-710-043

Male Toilet Female Toilet Male Changeroom Female Changeroom



2-710-024 2-710-026 2-710-028 2-710-030


2-710-025 2-710-027 2-710-029 2-710-031

RH Accessible Toilet LH Accessible Toilet RH Male Accessible Toilet LH Male Accessible Toilet



2-710-032 2-710-034 2-710-036 2-710-038


2-710-033 2-710-035 2-710-037 2-710-039

METLAM PARTITION HARDWARE

National Customer Service:

Ph: 1300 551 919 Fax: 1300 739 656

www.lincolnsentry.com.au BR0081CH

> Washroom Hardware & Accessories - Lincoln Sentry...18 Shower Rose & Hose, Folding Shower Seat,...

Documents

Transcript of > Washroom Hardware & Accessories - Lincoln Sentry...18 Shower Rose & Hose, Folding Shower Seat,...