① STANDARD PACKING LIST ② ③ ④ N3 Series
Transcript of ① STANDARD PACKING LIST ② ③ ④ N3 Series
STANDARD PACKING LIST
You Local Authorized Dealer
Main unit 1xLens cover 1x Battery holder 1xBattery 2xTools pouch 1xPlummet 1xManual 1xWarranty card 1xCharger 1x Reflective sheet 1xCarry case 1xBelt 2x
ATS-2B (Fiberglass)NLS-15 Prism PoleTK21T Prism Set
OPTIONAL ACCESSORIES
N3 SeriesTotal Station
SPECIFICATIONS
1000m ②5000m ③3+2ppm ④2+2ppm3+2ppm1.3s In Fine 0.2s In Tracking ⑤Manual Input, Auto CorrectionManual Input, Auto CorrectionSensor Reading Max:99999999.999m Min:1mm
2"Absolute, Continuous79mmV: Dual, H: DualMin: 1"
Erect152mm45mm (EDM 47mm)30x1°30"3"1.5m 10 Brightness Levels
16000 Points
Liquid, Dual Axis±6'1"
Distance Measurement ①Range
Accuracy
Measurement TimeAtmospheric CorrectionPrism ConstantTemperature CorrectionDistance ReadingAngle MeasurementAccuracyMethodDisk DiameterDetection MethodAngle ReadingTelescopeImageTube LengthEffective ApertureMagnificationField Of ViewResolving PowerMinimum Focus DistanceReticle IlluminationOperation SystemMemoryCompensatorSystemWorking RangeAccuracyPlummetLaser Plummet (Default)
Optical Plummet (Optional)
Keyboard And DisplayKeyboard DisplayResolutionPositionInterfaceData Interface Battery TypeVoltageOperating Time VialPlate VialCircular VialGeneralIP RateTemperature Range Dimension Weight
±1.5mm @1.5m 5 Levels Adjustable635nmClass 20.5mWErect3x0.5m ~5"
Alphanumeric 30 Keys3.0 Inches, Color Touch TFT240*400 dpiFace 1, Face 2
USB Flash Disk, Bluetooth
Lithium7.4V8 hours
30"/2mm8'/2mm
IP54-20°C ~ +50°C206*200*353mm6.0kg
AccuracyLaser BrightnessWavelengthLaser ClassLaser PowerImageMagnificationFocusing Range Field Of View
ReflectorlessPrismReflectorlessPrismSheet
① EN60825-1: 2007, Class laser 3R; Wave Length 650-690nm ② With Kodak gray card (reflective 90%). The reflectorless range and accuracy may vary depending on targets, measuring conditions. ③ Under good conditions: No haze, visibility about 40km. Overcast, no scintillation. ④ Range less than 100m. When measure the target at 100-200m, the accuracy is 5+2ppm, interval less than 5s. ⑤ Typical interval, under good conditions. Range less than 500m. It also depending on the target surface. Maximum interval less than 10s.
SOUTH SURVEYING & MAPPING TECHNOLOGY CO., LTD.Add: South Geo-information Industrial Park, No.39 Si Cheng Rd, Guangzhou, Chinahttp://www.southinstrument.com Version: N3 2.0
Note: all information above is subject to change without any prior notice.
1000m Reflectorless EDM
▶ Advanced collimation with smaller laser dot
▶ Long-range reflectorless EDM with
provide fast and accurate aiming.
short interval of measurement, less than 1.3s.
Newly designed go-through structure
with light weight.
Light but Durable Structure
allows a durable mechanical performance
▶ 3.0 inches large and high-resolution display provides clear visibility under
▶ Keypad are illuminated to minimize mistakes.
tough conditions.
Easy-to-read Display Unit
taking your eye off the telescope.
EDM Trigger Key▶ Trigger key allows the operator to get the measurement and record quickly without
One-touch Star Key▶ Star key for instant access to functions or settings.
and data transfer to PC or controller.
▶ USB port for convenient data transfer.
faster and easier connection
▶ N3 features Class 2, Bluetooth® 2.1+EDR module, it provide a
Cable-Free Data Transfer
▶ LPDM module on built-in laser plummet is equipped for accurate instrument setup in all conditions. 10 brightness levels are ready for optimum visibility.
User-Friendly Tools
levelling and station ▶ E-bubble for easier
setup under single or dual axis.
onboard system guided a
Easy-to-use Onboard System
fluent workflow with easy- to-understand icons
▶ N3 ensures a low learning cost when working in the field
▶ The intuitive, easy-to-use
application software on
Cost-Effective Choice with Versatile Program
construction and survey
board, like Resection, COGO, Height Transfer, Offset, Stake Out and Roads.
▶ Work faster and cheaper than ever.
▶ N3 carries a variety of
CORD. REM
MLMDistance Offset
AreaRoad
Resec�on
Save Time with Auto HeightMeasure, Record and Set Its Own Height Automatically.
In order to eliminate the errors of manual reading and typing, auto height enables operators to get the instrument height
Considering the limitation of space, we added a LPDM module based on our existed laser plummet to provide two functionalities into one part with unique co-axial structure: laser pointer for equipment centering together with the function of auto height measurement.
How Does it Work?
What Are The Benefits?
With integrated LPDM module on laser plummet, N3 can minimizes errors and accelerates the setup process onsite.
1.5m
● Not necessary to take extra accessory, e.g. tape
● No more mistakes from manual operations
● Save time and cost by accurate measurement
● Get the instrument height by a simple button press
1.5m
with a simple press.
This revolutionary function is now available in N3 Series total station.
Touch Screen
Point Stake-out