OVERViEW...rapid on-site service, and internet-based remote maintenance High availability of spare...
Transcript of OVERViEW...rapid on-site service, and internet-based remote maintenance High availability of spare...
www.ngr.at
®
Next Generation Recyclingmaschinen GmbHHQ, Production & Customer Care Center EuropeGewerbepark 22, 4101 Feldkirchen, Austria Phone +43 (0) 7233 70 107-0, Fax -2
Next Generation Recycling Machines, Inc.Sales & Customer Care Center America3000 Center Place, Suite 100, Norcross, GA 30093, USAPhone +1-678-720-9861, Fax -9863Toll Free (USA only) +1-877-640-2828
[email protected], www.ngr.at
®
MA
RK
ETI
NG
TO
OLS
, LIN
Z/A
US
TRIA
HQ, Production & Customer Care Center Europe
Big enough to innovate,small enough to cooperate!
NGR
SIMPLY ONE STEP AHEAD
Taicang Next Generation Recyclingmachines, Co., Ltd.Sales & Customer Care Center ChinaNo.6, Wuxi Road, Taicang Economic Development Zone,Taicang, Jiangsu 215400, ChinaPhone +86 (0) 512 536 52-100, Fax -332
HiGH-GRADERAW mATERiAl
High quality recycled pellets tested to standard EN 15343 et seq.
Very short residence times between shredding and pelletizing
High-performance filtration and degassing of the melt stream
iNNOVATiVE TECHNOlOGY
modular design and platform technology
Customized solutions for your post- industrial or post-consumer plastic waste help you achieve maximum yield
Continual developments in technology keep your waste management solution on the cutting edge
CUSTOmERSERViCE
Test runs with your material at one of our customer care centers
Expert advice in waste management from choosing the right equipment to financing
Commissioning by qualified technicians, rapid on-site service, and internet-based remote maintenance
High availability of spare parts through regional warehouses
POWER iNTElliGENCE
Power intelligence is a key concept in the design of high-performance equip-ment with minimal power and resource requirements
Use of the heat from the shredding process
Closed loop cooling water system
Control unit provides power management
iNCREASEPROFiTS
low operating costs with high plastics throughput, minimal power consumpti-on, and easy operation
Space-saving integration in your material logistics chain
long service life based on solid engineering and high-quality construction
EASY OPERATiON
The central operating element controls all equipment functions from feeding to pelletizing, etc.
Easy-to-operate equipment
Simple servicability, allows for fast change of material
The computer-controlled system optimizes the processing steps and stabilizes process parameters
GOOD REASONS FOR NGR
07 |
14, E
N Text and illustrations may include custom-made andspecial equipment available for an additional charge.
Subject to technical modifications and misprints.
> High quality pellets> innovative technology> Easy operation> Power intelligence> Cost-effective machine use> Excellent customer service
PlASTiCSRECYCliNG mACHiNES
KEEP VAlUABlE RAW mATERiAlS iN THE ECONOmiC CYClE
Plastics as basic materials prove their potential in a variety of products. most plastics are recyclable. NGR recycling machines are built to recycle the waste generated by plastics processing companies and give the plastics a “second chance“ at the end of their product life cycle. Our dwindling resources are too valuable to carelessly toss them into the landfill, dump them in the ocean so they pollute the environment or burn them.
USiNG iNNOVATiVE TECHNOlOGY FOR EVERYBODY‘S BENEFiT
NGR has been building plastics recycling machines in Austria for more than twenty years. These machines turn plastics waste into high-quality pellets in more than 70 countries worldwide. The company stays on the cutting edge of technology by continuously developing and improving plastics processing and machine components. A tightly woven network of distribution partners and our customer service representatives provide excellent service and make sure our machines can be used successfully for many years.
BROAD SElECTiON OF mACHiNES AND CUSTOmiZATiONS
The large variety of plastics and processing options can only be covered by a broad selection of machines. in addition, NGR collaborates with the customer to design a consistent comprehensive concept featuring NGR machines and recycling solutions and then integrates this concept into an existing material logistics solution. We are able to provide such customized solutions because our machines have a modular design and we utilize similar machine components.
OVERViEW
it takes sophisticated technology to make plastics recycling sustainable and more efficient and to continuously improve pellet quality. And it takes commitment to really be successful.
www.ngr.at
®
Next Generation Recyclingmaschinen GmbHHQ, Production & Customer Care Center EuropeGewerbepark 22, 4101 Feldkirchen, Austria Phone +43 (0) 7233 70 107-0, Fax -2
Next Generation Recycling Machines, Inc.Sales & Customer Care Center America3000 Center Place, Suite 100, Norcross, GA 30093, USAPhone +1-678-720-9861, Fax -9863Toll Free (USA only) +1-877-640-2828
[email protected], www.ngr.at
®
MA
RK
ETI
NG
TO
OLS
, LIN
Z/A
US
TRIA
HQ, Production & Customer Care Center Europe
Big enough to innovate,small enough to cooperate!
NGR
SIMPLY ONE STEP AHEAD
Taicang Next Generation Recyclingmachines, Co., Ltd.Sales & Customer Care Center ChinaNo.6, Wuxi Road, Taicang Economic Development Zone,Taicang, Jiangsu 215400, ChinaPhone +86 (0) 512 536 52-100, Fax -332
HiGH-GRADERAW mATERiAl
High quality recycled pellets tested to standard EN 15343 et seq.
Very short residence times between shredding and pelletizing
High-performance filtration and degassing of the melt stream
iNNOVATiVE TECHNOlOGY
modular design and platform technology
Customized solutions for your post- industrial or post-consumer plastic waste help you achieve maximum yield
Continual developments in technology keep your waste management solution on the cutting edge
CUSTOmERSERViCE
Test runs with your material at one of our customer care centers
Expert advice in waste management from choosing the right equipment to financing
Commissioning by qualified technicians, rapid on-site service, and internet-based remote maintenance
High availability of spare parts through regional warehouses
POWER iNTElliGENCE
Power intelligence is a key concept in the design of high-performance equip-ment with minimal power and resource requirements
Use of the heat from the shredding process
Closed loop cooling water system
Control unit provides power management
iNCREASEPROFiTS
low operating costs with high plastics throughput, minimal power consumpti-on, and easy operation
Space-saving integration in your material logistics chain
long service life based on solid engineering and high-quality construction
EASY OPERATiON
The central operating element controls all equipment functions from feeding to pelletizing, etc.
Easy-to-operate equipment
Simple servicability, allows for fast change of material
The computer-controlled system optimizes the processing steps and stabilizes process parameters
GOOD REASONS FOR NGR
07 |
14, E
N Text and illustrations may include custom-made andspecial equipment available for an additional charge.
Subject to technical modifications and misprints.
> High quality pellets> innovative technology> Easy operation> Power intelligence> Cost-effective machine use> Excellent customer service
PlASTiCSRECYCliNG mACHiNES
KEEP VAlUABlE RAW mATERiAlS iN THE ECONOmiC CYClE
Plastics as basic materials prove their potential in a variety of products. most plastics are recyclable. NGR recycling machines are built to recycle the waste generated by plastics processing companies and give the plastics a “second chance“ at the end of their product life cycle. Our dwindling resources are too valuable to carelessly toss them into the landfill, dump them in the ocean so they pollute the environment or burn them.
USiNG iNNOVATiVE TECHNOlOGY FOR EVERYBODY‘S BENEFiT
NGR has been building plastics recycling machines in Austria for more than twenty years. These machines turn plastics waste into high-quality pellets in more than 70 countries worldwide. The company stays on the cutting edge of technology by continuously developing and improving plastics processing and machine components. A tightly woven network of distribution partners and our customer service representatives provide excellent service and make sure our machines can be used successfully for many years.
BROAD SElECTiON OF mACHiNES AND CUSTOmiZATiONS
The large variety of plastics and processing options can only be covered by a broad selection of machines. in addition, NGR collaborates with the customer to design a consistent comprehensive concept featuring NGR machines and recycling solutions and then integrates this concept into an existing material logistics solution. We are able to provide such customized solutions because our machines have a modular design and we utilize similar machine components.
OVERViEW
it takes sophisticated technology to make plastics recycling sustainable and more efficient and to continuously improve pellet quality. And it takes commitment to really be successful.
www.ngr.at
®
Next Generation Recyclingmaschinen GmbHHQ, Production & Customer Care Center EuropeGewerbepark 22, 4101 Feldkirchen, Austria Phone +43 (0) 7233 70 107-0, Fax -2
Next Generation Recycling Machines, Inc.Sales & Customer Care Center America3000 Center Place, Suite 100, Norcross, GA 30093, USAPhone +1-678-720-9861, Fax -9863Toll Free (USA only) +1-877-640-2828
[email protected], www.ngr.at
®
MA
RK
ETI
NG
TO
OLS
, LIN
Z/A
US
TRIA
HQ, Production & Customer Care Center Europe
Big enough to innovate,small enough to cooperate!
NGR
SIMPLY ONE STEP AHEAD
Taicang Next Generation Recyclingmachines, Co., Ltd.Sales & Customer Care Center ChinaNo.6, Wuxi Road, Taicang Economic Development Zone,Taicang, Jiangsu 215400, ChinaPhone +86 (0) 512 536 52-100, Fax -332
HiGH-GRADERAW mATERiAl
High quality recycled pellets tested to standard EN 15343 et seq.
Very short residence times between shredding and pelletizing
High-performance filtration and degassing of the melt stream
iNNOVATiVE TECHNOlOGY
modular design and platform technology
Customized solutions for your post- industrial or post-consumer plastic waste help you achieve maximum yield
Continual developments in technology keep your waste management solution on the cutting edge
CUSTOmERSERViCE
Test runs with your material at one of our customer care centers
Expert advice in waste management from choosing the right equipment to financing
Commissioning by qualified technicians, rapid on-site service, and internet-based remote maintenance
High availability of spare parts through regional warehouses
POWER iNTElliGENCE
Power intelligence is a key concept in the design of high-performance equip-ment with minimal power and resource requirements
Use of the heat from the shredding process
Closed loop cooling water system
Control unit provides power management
iNCREASEPROFiTS
low operating costs with high plastics throughput, minimal power consumpti-on, and easy operation
Space-saving integration in your material logistics chain
long service life based on solid engineering and high-quality construction
EASY OPERATiON
The central operating element controls all equipment functions from feeding to pelletizing, etc.
Easy-to-operate equipment
Simple servicability, allows for fast change of material
The computer-controlled system optimizes the processing steps and stabilizes process parameters
GOOD REASONS FOR NGR
07 |
14, E
N Text and illustrations may include custom-made andspecial equipment available for an additional charge.
Subject to technical modifications and misprints.
> High quality pellets> innovative technology> Easy operation> Power intelligence> Cost-effective machine use> Excellent customer service
PlASTiCSRECYCliNG mACHiNES
KEEP VAlUABlE RAW mATERiAlS iN THE ECONOmiC CYClE
Plastics as basic materials prove their potential in a variety of products. most plastics are recyclable. NGR recycling machines are built to recycle the waste generated by plastics processing companies and give the plastics a “second chance“ at the end of their product life cycle. Our dwindling resources are too valuable to carelessly toss them into the landfill, dump them in the ocean so they pollute the environment or burn them.
USiNG iNNOVATiVE TECHNOlOGY FOR EVERYBODY‘S BENEFiT
NGR has been building plastics recycling machines in Austria for more than twenty years. These machines turn plastics waste into high-quality pellets in more than 70 countries worldwide. The company stays on the cutting edge of technology by continuously developing and improving plastics processing and machine components. A tightly woven network of distribution partners and our customer service representatives provide excellent service and make sure our machines can be used successfully for many years.
BROAD SElECTiON OF mACHiNES AND CUSTOmiZATiONS
The large variety of plastics and processing options can only be covered by a broad selection of machines. in addition, NGR collaborates with the customer to design a consistent comprehensive concept featuring NGR machines and recycling solutions and then integrates this concept into an existing material logistics solution. We are able to provide such customized solutions because our machines have a modular design and we utilize similar machine components.
OVERViEW
it takes sophisticated technology to make plastics recycling sustainable and more efficient and to continuously improve pellet quality. And it takes commitment to really be successful.
®
E:GRAN A:GRAN S:GRAN x:GRAN F:GRAN ABmF
Extruder
S:GRAN 65-50
S:GRAN 65-70
S:GRAN 75-50
S:GRAN 75-70
S:GRAN 85-70
S:GRAN 95-70
S:GRAN 105-100
S:GRAN 125-100
ø B [mm] [mm]
65 500
65 700
75 500
75 700
85 700
95 700
105 1000
125 1000
A:GRAN 65-40
A:GRAN 70-40
ø B [mm] [mm]
65 400
70 400
x:GRAN 125-140
x:GRAN 145-140
x:GRAN 165-180
x:GRAN 185-180
x:GRAN 205-180
ø B [mm] [mm]
125 1400
145 1400
165 1800
185 1800
205 1800
F:GRAN 125-20
F:GRAN 145-20
F:GRAN 165-20
F:GRAN 165-25
F:GRAN 185-25
F:GRAN 205-25
ø E ø F [mm] [mm]
125 200
145 200
165 200
165 250
185 250
205 250
ABmF-0570-07
ABmF-0570-09
ABmF-0570-12
ABmF-0750-09
ABmF-0750-12
ABmF-1050-09
ABmF-1050-12
ABmF-1050-15
ABmF-1050-19
FilTER BUFFER AREA VOlUmE V [cm2] [liter]
570 7
570 9
570 12
750 9
750 12
1050 9
1050 12
1050 15
1050 19
E:GRAN 50-12
E:GRAN 75-16
ø B [mm] [mm]
50 120
75 160
V [liter]
Filter Area [cm2]
PEllETS
in addition to high quality, the uniform pellet size also provides for homogeneous mixture in new material. NGR thus plays an indirect role in ensuring consistent quality in the final product.
Further materials: PA, PC, PPS, ABS, EVA, biopolymers, blends, etc.
mATERiAlSAUTOmATiC BAND mElT FilTER
FlAKE SERiES FEEDER-ExTRUDER COmBiNATiON
Film SERiESCHOPPER-FEEDER-ExTRUDER COmBiNATiON
UNiVERSAl SERiESSHREDDER-FEEDER-ExTRUDER COmBiNATiON
Small to medium output range120 kg/h (lDPE)
> ONE-STEP Technology> High Performance for a small floor space requirement> One-button automatic On/Off control> For automatic inline production
medium output range100-120 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
High output range 220-800 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
Very high output range 800-2000 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
medium to high output range750-2000 kg/h (lDPE)
> Automatic feeder screw control> Anti-Bridging Silo> One-button automatic On/Off control> DUmP and RUN operation
High to very high output range 450-2400 kg/h (lDPE)
> High filter fineness possible> Extruder operation during filter band feed > Very high throughput rates> Regular filter area renewal> Fully automated filtration> Very low operating costs
®
E:GRAN A:GRAN S:GRAN x:GRAN F:GRAN ABmF
Extruder
S:GRAN 65-50
S:GRAN 65-70
S:GRAN 75-50
S:GRAN 75-70
S:GRAN 85-70
S:GRAN 95-70
S:GRAN 105-100
S:GRAN 125-100
ø B [mm] [mm]
65 500
65 700
75 500
75 700
85 700
95 700
105 1000
125 1000
A:GRAN 65-40
A:GRAN 70-40
ø B [mm] [mm]
65 400
70 400
x:GRAN 125-140
x:GRAN 145-140
x:GRAN 165-180
x:GRAN 185-180
x:GRAN 205-180
ø B [mm] [mm]
125 1400
145 1400
165 1800
185 1800
205 1800
F:GRAN 125-20
F:GRAN 145-20
F:GRAN 165-20
F:GRAN 165-25
F:GRAN 185-25
F:GRAN 205-25
ø E ø F [mm] [mm]
125 200
145 200
165 200
165 250
185 250
205 250
ABmF-0570-07
ABmF-0570-09
ABmF-0570-12
ABmF-0750-09
ABmF-0750-12
ABmF-1050-09
ABmF-1050-12
ABmF-1050-15
ABmF-1050-19
FilTER BUFFER AREA VOlUmE V [cm2] [liter]
570 7
570 9
570 12
750 9
750 12
1050 9
1050 12
1050 15
1050 19
E:GRAN 50-12
E:GRAN 75-16
ø B [mm] [mm]
50 120
75 160
V [liter]
Filter Area [cm2]
PEllETS
in addition to high quality, the uniform pellet size also provides for homogeneous mixture in new material. NGR thus plays an indirect role in ensuring consistent quality in the final product.
Further materials: PA, PC, PPS, ABS, EVA, biopolymers, blends, etc.
mATERiAlSAUTOmATiC BAND mElT FilTER
FlAKE SERiES FEEDER-ExTRUDER COmBiNATiON
Film SERiESCHOPPER-FEEDER-ExTRUDER COmBiNATiON
UNiVERSAl SERiESSHREDDER-FEEDER-ExTRUDER COmBiNATiON
Small to medium output range120 kg/h (lDPE)
> ONE-STEP Technology> High Performance for a small floor space requirement> One-button automatic On/Off control> For automatic inline production
medium output range100-120 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
High output range 220-800 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
Very high output range 800-2000 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
medium to high output range750-2000 kg/h (lDPE)
> Automatic feeder screw control> Anti-Bridging Silo> One-button automatic On/Off control> DUmP and RUN operation
High to very high output range 450-2400 kg/h (lDPE)
> High filter fineness possible> Extruder operation during filter band feed > Very high throughput rates> Regular filter area renewal> Fully automated filtration> Very low operating costs
®
E:GRAN A:GRAN S:GRAN x:GRAN F:GRAN ABmF
Extruder
S:GRAN 65-50
S:GRAN 65-70
S:GRAN 75-50
S:GRAN 75-70
S:GRAN 85-70
S:GRAN 95-70
S:GRAN 105-100
S:GRAN 125-100
ø B [mm] [mm]
65 500
65 700
75 500
75 700
85 700
95 700
105 1000
125 1000
A:GRAN 65-40
A:GRAN 70-40
ø B [mm] [mm]
65 400
70 400
x:GRAN 125-140
x:GRAN 145-140
x:GRAN 165-180
x:GRAN 185-180
x:GRAN 205-180
ø B [mm] [mm]
125 1400
145 1400
165 1800
185 1800
205 1800
F:GRAN 125-20
F:GRAN 145-20
F:GRAN 165-20
F:GRAN 165-25
F:GRAN 185-25
F:GRAN 205-25
ø E ø F [mm] [mm]
125 200
145 200
165 200
165 250
185 250
205 250
ABmF-0570-07
ABmF-0570-09
ABmF-0570-12
ABmF-0750-09
ABmF-0750-12
ABmF-1050-09
ABmF-1050-12
ABmF-1050-15
ABmF-1050-19
FilTER BUFFER AREA VOlUmE V [cm2] [liter]
570 7
570 9
570 12
750 9
750 12
1050 9
1050 12
1050 15
1050 19
E:GRAN 50-12
E:GRAN 75-16
ø B [mm] [mm]
50 120
75 160
V [liter]
Filter Area [cm2]
PEllETS
in addition to high quality, the uniform pellet size also provides for homogeneous mixture in new material. NGR thus plays an indirect role in ensuring consistent quality in the final product.
Further materials: PA, PC, PPS, ABS, EVA, biopolymers, blends, etc.
mATERiAlSAUTOmATiC BAND mElT FilTER
FlAKE SERiES FEEDER-ExTRUDER COmBiNATiON
Film SERiESCHOPPER-FEEDER-ExTRUDER COmBiNATiON
UNiVERSAl SERiESSHREDDER-FEEDER-ExTRUDER COmBiNATiON
Small to medium output range120 kg/h (lDPE)
> ONE-STEP Technology> High Performance for a small floor space requirement> One-button automatic On/Off control> For automatic inline production
medium output range100-120 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
High output range 220-800 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
Very high output range 800-2000 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
medium to high output range750-2000 kg/h (lDPE)
> Automatic feeder screw control> Anti-Bridging Silo> One-button automatic On/Off control> DUmP and RUN operation
High to very high output range 450-2400 kg/h (lDPE)
> High filter fineness possible> Extruder operation during filter band feed > Very high throughput rates> Regular filter area renewal> Fully automated filtration> Very low operating costs
®
E:GRAN A:GRAN S:GRAN x:GRAN F:GRAN ABmF
Extruder
S:GRAN 65-50
S:GRAN 65-70
S:GRAN 75-50
S:GRAN 75-70
S:GRAN 85-70
S:GRAN 95-70
S:GRAN 105-100
S:GRAN 125-100
ø B [mm] [mm]
65 500
65 700
75 500
75 700
85 700
95 700
105 1000
125 1000
A:GRAN 65-40
A:GRAN 70-40
ø B [mm] [mm]
65 400
70 400
x:GRAN 125-140
x:GRAN 145-140
x:GRAN 165-180
x:GRAN 185-180
x:GRAN 205-180
ø B [mm] [mm]
125 1400
145 1400
165 1800
185 1800
205 1800
F:GRAN 125-20
F:GRAN 145-20
F:GRAN 165-20
F:GRAN 165-25
F:GRAN 185-25
F:GRAN 205-25
ø E ø F [mm] [mm]
125 200
145 200
165 200
165 250
185 250
205 250
ABmF-0570-07
ABmF-0570-09
ABmF-0570-12
ABmF-0750-09
ABmF-0750-12
ABmF-1050-09
ABmF-1050-12
ABmF-1050-15
ABmF-1050-19
FilTER BUFFER AREA VOlUmE V [cm2] [liter]
570 7
570 9
570 12
750 9
750 12
1050 9
1050 12
1050 15
1050 19
E:GRAN 50-12
E:GRAN 75-16
ø B [mm] [mm]
50 120
75 160
V [liter]
Filter Area [cm2]
PEllETS
in addition to high quality, the uniform pellet size also provides for homogeneous mixture in new material. NGR thus plays an indirect role in ensuring consistent quality in the final product.
Further materials: PA, PC, PPS, ABS, EVA, biopolymers, blends, etc.
mATERiAlSAUTOmATiC BAND mElT FilTER
FlAKE SERiES FEEDER-ExTRUDER COmBiNATiON
Film SERiESCHOPPER-FEEDER-ExTRUDER COmBiNATiON
UNiVERSAl SERiESSHREDDER-FEEDER-ExTRUDER COmBiNATiON
Small to medium output range120 kg/h (lDPE)
> ONE-STEP Technology> High Performance for a small floor space requirement> One-button automatic On/Off control> For automatic inline production
medium output range100-120 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
High output range 220-800 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
Very high output range 800-2000 kg/h (lDPE)
> ONE-STEP technology> Process bulky plastic scrap> One-button automatic On/Off control> DUmP and RUN operation
medium to high output range750-2000 kg/h (lDPE)
> Automatic feeder screw control> Anti-Bridging Silo> One-button automatic On/Off control> DUmP and RUN operation
High to very high output range 450-2400 kg/h (lDPE)
> High filter fineness possible> Extruder operation during filter band feed > Very high throughput rates> Regular filter area renewal> Fully automated filtration> Very low operating costs
www.ngr.at
®
Next Generation Recyclingmaschinen GmbHHQ, Production & Customer Care Center EuropeGewerbepark 22, 4101 Feldkirchen, Austria Phone +43 (0) 7233 70 107-0, Fax -2
Next Generation Recycling Machines, Inc.Sales & Customer Care Center America3000 Center Place, Suite 100, Norcross, GA 30093, USAPhone +1-678-720-9861, Fax -9863Toll Free (USA only) +1-877-640-2828
[email protected], www.ngr.at
®
MA
RK
ETI
NG
TO
OLS
, LIN
Z/A
US
TRIA
HQ, Production & Customer Care Center Europe
Big enough to innovate,small enough to cooperate!
NGR
SIMPLY ONE STEP AHEAD
Taicang Next Generation Recyclingmachines, Co., Ltd.Sales & Customer Care Center ChinaNo.6, Wuxi Road, Taicang Economic Development Zone,Taicang, Jiangsu 215400, ChinaPhone +86 (0) 512 536 52-100, Fax -332
HiGH-GRADERAW mATERiAl
High quality recycled pellets tested to standard EN 15343 et seq.
Very short residence times between shredding and pelletizing
High-performance filtration and degassing of the melt stream
iNNOVATiVE TECHNOlOGY
modular design and platform technology
Customized solutions for your post- industrial or post-consumer plastic waste help you achieve maximum yield
Continual developments in technology keep your waste management solution on the cutting edge
CUSTOmERSERViCE
Test runs with your material at one of our customer care centers
Expert advice in waste management from choosing the right equipment to financing
Commissioning by qualified technicians, rapid on-site service, and internet-based remote maintenance
High availability of spare parts through regional warehouses
POWER iNTElliGENCE
Power intelligence is a key concept in the design of high-performance equip-ment with minimal power and resource requirements
Use of the heat from the shredding process
Closed loop cooling water system
Control unit provides power management
iNCREASEPROFiTS
low operating costs with high plastics throughput, minimal power consumpti-on, and easy operation
Space-saving integration in your material logistics chain
long service life based on solid engineering and high-quality construction
EASY OPERATiON
The central operating element controls all equipment functions from feeding to pelletizing, etc.
Easy-to-operate equipment
Simple servicability, allows for fast change of material
The computer-controlled system optimizes the processing steps and stabilizes process parameters
GOOD REASONS FOR NGR07
| 14
, EN Text and illustrations may include custom-made and
special equipment available for an additional charge.
Subject to technical modifications and misprints.
> High quality pellets> innovative technology> Easy operation> Power intelligence> Cost-effective machine use> Excellent customer service
PlASTiCSRECYCliNG mACHiNES
KEEP VAlUABlE RAW mATERiAlS iN THE ECONOmiC CYClE
Plastics as basic materials prove their potential in a variety of products. most plastics are recyclable. NGR recycling machines are built to recycle the waste generated by plastics processing companies and give the plastics a “second chance“ at the end of their product life cycle. Our dwindling resources are too valuable to carelessly toss them into the landfill, dump them in the ocean so they pollute the environment or burn them.
USiNG iNNOVATiVE TECHNOlOGY FOR EVERYBODY‘S BENEFiT
NGR has been building plastics recycling machines in Austria for more than twenty years. These machines turn plastics waste into high-quality pellets in more than 70 countries worldwide. The company stays on the cutting edge of technology by continuously developing and improving plastics processing and machine components. A tightly woven network of distribution partners and our customer service representatives provide excellent service and make sure our machines can be used successfully for many years.
BROAD SElECTiON OF mACHiNES AND CUSTOmiZATiONS
The large variety of plastics and processing options can only be covered by a broad selection of machines. in addition, NGR collaborates with the customer to design a consistent comprehensive concept featuring NGR machines and recycling solutions and then integrates this concept into an existing material logistics solution. We are able to provide such customized solutions because our machines have a modular design and we utilize similar machine components.
OVERViEW
it takes sophisticated technology to make plastics recycling sustainable and more efficient and to continuously improve pellet quality. And it takes commitment to really be successful.