GENESIS · PF6542 65 3/8 42 35.1 PF6548 65 3/8 48 39.2 PF6560 65 3/8 60 45.4 PF8318 83 9/16 18 31.2...
Transcript of GENESIS · PF6542 65 3/8 42 35.1 PF6548 65 3/8 48 39.2 PF6560 65 3/8 60 45.4 PF8318 83 9/16 18 31.2...
GENESISOFFICE FURNITURE SYSTEM
G1 Series
ITEM LIST
Genesis Co., Ltd.Factory : 1003-11, Poseung jangan-Ro, Jangan-Myun, Hwasung-City, Kyunggi-Do, Korea
Sales Office : Ansan Tekom-Gil 43, Sasa-Dong, Sangnok-Gu, Ansan Si, Gyeonggi-Do, Korea
Tel : +82-31-415-6191 // Fax : +82-31-415-6195
www.genesisfnt.com
Doc. No. GPL140401 _ G1
Contents
Panel Frames ...................................................................................... 02-04
Paenl Frame Components .................................................................. 05-09
Panel Segments .................................................................................. 10-16
Storage Units ....................................................................................... 17
Pedestals ............................................................................................ 18-19
Lateral Files ......................................................................................... 20
Modesty Panels .................................................................................. 21-22
Worksurfaces ...................................................................................... 23-27
Worksurface Supports ........................................................................ 28-30
Panel Hardware .................................................................................... 31
Power Distributor ................................................................................. 32
Ceiling Track ........................................................................................ 33
Panel FramesG
EN
ES
IS G
1
Panel Frames
PF4218 42 9/16 18 15.8 PF4224 42 9/16 24 17.8 PF4230 42 9/16 30 19.8 PF4236 42 9/16 36 21.8 PF4242 42 9/16 42 24.8 PF4248 42 9/16 48 26.5 PF4260 42 9/16 60 30.2 PF4818 47 1/4 18 16.9 PF4824 47 1/4 24 18.9 PF4830 47 1/4 30 20.9 PF4836 47 1/4 36 22.9 PF4842 47 1/4 42 25.1PF4848 47 1/4 48 27.3PF4860 47 1/4 60 31.3
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
14 gauge, roll formed cold rolled steel.Powder coated paint finish.Slotted uprights support components at 1" increments. Top, middle and bottom cable distribution. 2 vertical cable access channels. 3 1/4" finished panel thickness (2" deep interior cavity). Gravity lock, keyhole slots accept panel inserts (segments). Straight line, steel panel-to-panel connectors included. 3" adjustable leveling glides.Panel connections accomplished with 13mm Allen Wrench
OPTION:
Specify Panel Segments.Specify Panel Top Caps.Specify Panel Base Covers.
SPECIFY:
Product Number, Quantity, Options
02
Panel Frames
GE
NE
SIS
G1
Panel Frames
PF5618 56 1/16 18 22.1 PF5624 56 1/16 24 24.9 PF5630 56 1/16 30 27.7 PF5636 56 1/16 36 30.6 PF5642 56 1/16 42 33.9 PF5648 56 1/16 48 37.1 PF5660 56 1/16 60 43.2 PF6518 65 3/8 18 24.3 PF6524 65 3/8 24 27.1 PF6530 65 3/8 30 29.9 PF6536 65 3/8 36 32.8 PF6542 65 3/8 42 35.1PF6548 65 3/8 48 39.2PF6560 65 3/8 60 45.4 PF8318 83 9/16 18 31.2 PF8324 83 9/16 24 35.2 PF8330 83 9/16 30 39.2 PF8336 83 9/16 36 43.2 PF8342 83 9/16 42 47.4PF8348 83 9/16 48 51.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
14 gauge, roll formed cold rolled steel.Powder coated paint finish.Slotted uprights support components at 1" increments. Top, middle and bottom cable distribution. 2 vertical cable access channels. 3 1/4" finished panel thickness (2" deep interior cavity). Gravity lock, keyhole slots accept panel inserts (segments). Straight line, steel panel-to-panel connectors included. 3" adjustable leveling glides.Panel connections accomplished with 13mm Allen Wrench
OPTION:
Specify Panel Segments.Specify Panel Top Caps.Specify Panel Base Covers.
SPECIFY:
Product Number, Quantity, Options
03
Panel FramesG
EN
ES
IS G
1
Stackable Panel Frames
PFS0918 9 18 4.6 PFS0924 9 24 5.6 PFS0930 9 30 6.4 PFS0936 9 36 7.2 PFS0942 9 42 8.0 PFS0948 9 48 8.8 PFS0960 9 60 10.4
PFS1418 14 18 5.4 PFS1424 14 24 6.5PFS1430 14 30 7.5PFS1436 14 36 8.4PFS1442 14 42 9.3PFS1448 14 48 10.3PFS1460 14 60 12.2
PFS1818 18 18 6.6PFS1824 18 24 7.9PFS1830 18 30 9.2PFS1836 18 36 10.3PFS1842 18 42 11.4PFS1848 18 48 12.5PFS1860 18 60 14.9
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Stacks on exiting panel frame. Supports Overhead Storage.14 gauge, roll formed cold rolled steel.Powder coated paint finish.Slotted uprights support components at 1" increments. Top, middle and bottom cable distribution. 2 vertical cable access channels. 3 1/4" finished panel thickness (2" deep interior cavity). Gravity lock, keyhole slots accept panel inserts (segments). Straight line, steel panel-to-panel connectors included. Panel connections accomplished with 13mm Allen Wrench
OPTION:
Specify Panel Segments.Specify Panel Top Caps.
SPECIFY:
Product Number, Quantity, Options
04
Panel Door Frame
PDF8336L/R 83 9/16 36 99.5 PDF8342L/R 83 9/16 42 104.1 PDF8348L/R 83 9/16 48 119.1
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
"Door frame" is adjustable up and down 3/4" to allow for irregular floors.Includes door frame, hinges, fasteners, threshold.
SPECIFY:
Product Number, Quantity, Finish, Top Cap Finish, Left or Right Handed.
NOTE:
To define door frame right/left (R/L) put your back to the hinge and swing your R/L arm in the direction the door is to swing. This defines the frame panel R/L specification.
Panel Frame Components
GE
NE
SIS
G1
Panel Top Caps
PTC18AL 18 1.0 PTC24AL 24 1.1 PTC30AL 30 1.2 PTC36AL 36 1.4 PTC42AL 42 1.7 PTC48AL 48 1.9 PTC60AL 60 2.2
PRODUCT DIMENSIONS WEIGHT NUMBER W LB
DESCRIPTION:
3 1/4" wide and 1/2" thick, flush mounted design.Powder coated finish on aluminum.Radius Top Cap is integrally colored.
SPECIFY:
Product Number, Quantity, Finish
05
Radius Top and Edge
Panel Top Caps
PTCW18 18 1.0 PTCW24 24 1.1 PTCW30 30 1.2 PTCW36 36 1.4 PTCW42 42 1.7 PTCW48 48 1.9 PTCW60 60 2.2 PTCW3500 145 5.7
PRODUCT DIMENSIONS WEIGHT NUMBER W LB
DESCRIPTION:
3 1/4" wide and 1/2" thick, flush mounted design.Full length grip edge.Reinforced gusset to prevent warping.Removable to permit laying-in of cables.
SPECIFY:
Product Number, Quantity, Finish
Wood Grain
Panel Base Cover
PBC18 18 2.1 PBC24 24 2.8 PBC30 30 3.5 PBC36 36 4.2 PBC42 42 4.8 PBC48 48 5.5 PBC60 60 6.9
PRODUCT DIMENSIONS WEIGHT NUMBER W LB
DESCRIPTION:
4 5/16” high (excluding glides)20 gauge, cold rolled steel.Powder coated paint finish.Includes receptacle(s) opening and snap in and out filler(s) Removable to permit laying-in of cables.
SPECIFY:
Product Number, Quantity, Finish
Available on extended lead time only
Panel Frame ComponentsG
EN
ES
IS G
1
End Cover Kits
End Cover KitsEC42AL 42 1/8 1.6 EC48AL 46 3/4 1.7EC56AL 55 5/8 2.1EC65AL 64 15/16 2.4EC83AL 83 1/8 3.1
Variable-Height, End Cover KitsECV06AL 42 - 48 0.2 ECV09AL 56 - 65 0.3ECV18AL 48-65, 65-83 0.6ECV23AL 42 - 65 0.8ECV35AL 48 - 83 1.3
PRODUCT DIMENSIONS WEIGHT NUMBER W LB
DESCRIPTION:
3 1/4" wide and 1/2" thick, flush mounted design.Powder coated finish on aluminum.Radius Top Cap is integrally colored.
SPECIFY:
Product Number, Quantity, Finish
06
Radius side and Edge
Variable-Height, End Cover KitsRadius side and Edge
End Cover Kits
End Cover KitsECW42 42 1/8 1.6 ECW48 46 3/4 1.7ECW56 55 5/8 2.1ECW65 64 15/16 2.4ECW83 83 1/8 3.1ECW3300 143 3/4 5.4
Variable-Height, End Cover KitsECVW06 42 - 48 0.2 ECVW09 56 - 65 0.3ECVW18 48-65, 65-83 0.6ECVW23 42 - 65 0.8ECVW35 48 - 83 1.3
PRODUCT DIMENSIONS WEIGHT NUMBER W LBWood Grain
Variable-Height, End Cover KitsWood Grain
DESCRIPTION:
3 1/4" wide and 1/2" thick, flush mounted design.Integrally colored, texture paint finish.Grip fit maintains aligment and prevents dislodgement.
SPECIFY:
Product Number, Quantity, Finish
Available on extended lead time only
Panel Frame Components
GE
NE
SIS
G1
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
07
Three-Way Panel Connector
DESCRIPTION:
10 gauge, cold heated steel, universal connector blocks.20 gauge, cold rolled steel, connector cover.Powder coated paint finish.Included connector hardware.
SPECIFY:
Product Number, Quantity, FinishSpecify & Order Top Cap serparately.
NOTE - PC400 consists of four blocks with connecting hardware
Four-Way Panel Connector
PC29042 41 1/2 4.8PC29048 46 1/8 5.8PC29056 55 1/16 6.7PC29065 64 3/8 7.6PC29083 82 1/2 9.3PC290120 119 1/2 12.7
Three-Way Panel Connector
PC342 41 1/2 4.8PC348 46 1/8 5.8PC356 55 1/16 6.7PC365 64 3/8 7.6PC383 82 1/2 9.3PC3120 119 1/2 12.7
Four-Way Panel Connector
PC400 3 1/8 2.7
Panel Frame ComponentsG
EN
ES
IS G
1
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
08
Panel Connector
Three-Way Variable-HeightPanel Connector
DESCRIPTION:
10 gauge, cold heated steel, universal connector blocks.20 gauge, cold rolled steel, connector cover.Powder coated paint finish.Included connector hardware.
SPECIFY:
Product Number, Quantity, FinishSpecify & Order Top Cap serparately.
Two-Way 135PC213542 42 PC213548 48 PC213556 56 PC213565 65 PC213583 83 PC2135120 120
Three-Way 120PC312042 42 PC312048 48 PC312056 56 PC312065 65 PC312083 83 PC3120120 120
PCV29006 42 - 48 0.9 PCV29009 56 - 65 0.3PCV29018 48-65, 65-83 0.6PCV29023 42 - 65 0.8PCV29035 48 - 83 1.3
Three-Way Variable-Height Panel ConnectorPCV306 42 - 48 0.8 PCV309 56 - 65 1.2PCV318 48-65, 65-83 2.4PCV323 42 - 65 3.1PCV335 48 - 83 3.6
Panel Frame Components
GE
NE
SIS
G1
Panel Connector Top Caps PRODUCT DIMENSIONS WEIGHT NUMBER H LB
09
Panel Connector top Caps
DESCRIPTION:
1/2” thick, flush mounted design.Options include integrally colored, textured paint finish, wood grain vinyl/wrap or powder coat finish on aluminum.Grip fit maintains aligment and prevents dislodgement.Removable to permit laying-in of cables.
SPECIFY:
Product Number, Quantity, Finish
PCTCW 3 1/4 0.1
PCTCAL 3 1/4 0.1
PCTC2135AL 3 1/4 0.1
PCTC3120AL 3 1/4 0.1
Wood Grain
Radius (Aluminum)
PCTCAL
PCTC2135AL
PCTC3120AL
Panel SegmentsG
EN
ES
IS G
1
Panel SegmentsFabric Covered Hard Surface
PSNT0918 9 17 5/8 2.0PSNT0924 9 23 5/8 2.4PSNT0930 9 29 5/8 2.8PSNT0936 9 35 5/8 3.4PSNT0942 9 41 5/8 4.0PSNT0948 9 47 5/8 4.5
PSNT1418 13 7/16 17 5/8 3.0PSNT1424 13 7/16 23 5/8 3.6PSNT1430 13 7/16 29 5/8 4.3PSNT1436 13 7/16 35 5/8 5.2PSNT1442 13 7/16 41 5/8 6.1PSNT1448 13 7/16 47 5/8 6.9
PSNT1818 18 1/8 17 5/8 3.2PSNT1824 18 1/8 23 5/8 3.6PSNT1830 18 1/8 29 5/8 5.1PSNT1836 18 1/8 35 5/8 6.1PSNT1842 18 1/8 41 5/8 7.1PSNT1848 18 1/8 47 5/8 8.1
PSNT2418 23 1/2 17 5/8 4.2PSNT2424 23 1/2 23 5/8 5.4PSNT2430 23 1/2 29 5/8 6.6PSNT2436 23 1/2 35 5/8 7.9PSNT2442 23 1/2 41 5/8 9.1PSNT2448 23 1/2 47 5/8 10.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
20 gauge, cold rolled steel casting.35 Sound Transmission Coefficient.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.Can be reupholstered in the field.
SPECIFY:
Product Number, Quantity, Fabric
10
Panel Segments
GE
NE
SIS
G1
Panel SegmentsFabric Covered Tackable/Acoustical
PST0918 9 17 5/8 2.2PST0924 9 23 5/8 2.7PST0930 9 29 5/8 3.1PST0936 9 35 5/8 3.9PST0942 9 41 5/8 4.5PST0948 9 47 5/8 5.0
PST1418 13 7/16 17 5/8 3.3PST1424 13 7/16 23 5/8 4.1PST1430 13 7/16 29 5/8 4.8PST1436 13 7/16 35 5/8 5.9PST1442 13 7/16 41 5/8 6.9PST1448 13 7/16 47 5/8 7.7 PST1818 18 1/8 17 5/8 3.8PST1824 18 1/8 23 5/8 4.7PST1830 18 1/8 29 5/8 5.7PST1836 18 1/8 35 5/8 6.8PST1842 18 1/8 41 5/8 7.9PST1848 18 1/8 47 5/8 9.1
PST2418 23 1/2 17 5/8 4.9PST2424 23 1/2 23 5/8 6.1PST2430 23 1/2 29 5/8 7.4PST2436 23 1/2 35 5/8 8.8PST2442 23 1/2 41 5/8 10.1PST2448 23 1/2 47 5/8 11.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Insert with 1/2” compressed fiberglass.35 Sound Transmission Coefficient.20 gauge, cold rolled steel casting.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.Can be reupholstered in the field.
SPECIFY:
Product Number, Quantity, Fabric
11
Panel SegmentsG
EN
ES
IS G
1
Panel SegmentsPainted
PSP0918 9 17 5/8 2.0PSP0924 9 23 5/8 2.4PSP0930 9 29 5/8 2.8PSP0936 9 35 5/8 3.4PSP0942 9 41 5/8 4.0PSP0948 9 47 5/8 4.5
PSP1418 13 7/16 17 5/8 3.0PSP1424 13 7/16 23 5/8 3.6PSP1430 13 7/16 29 5/8 4.3PSP1436 13 7/16 35 5/8 5.2PSP1442 13 7/16 41 5/8 6.1PSP1448 13 7/16 47 5/8 6.9 PSP1818 18 1/8 17 5/8 3.3PSP1824 18 1/8 23 5/8 4.2PSP1830 18 1/8 29 5/8 5.1PSP1836 18 1/8 35 5/8 6.1PSP1842 18 1/8 41 5/8 7.1PSP1848 18 1/8 47 5/8 8.1
PSP2418 23 1/2 17 5/8 4.2PSP2424 23 1/2 23 5/8 5.4PSP2430 23 1/2 29 5/8 6.6PSP2436 23 1/2 35 5/8 7.9PSP2442 23 1/2 41 5/8 9.1PSP2448 23 1/2 47 5/8 10.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Powder coated paint finish.35 Sound Transmission Coefficient.20 gauge, cold rolled steel casting.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.
SPECIFY:
Product Number, Quantity, Finish
12
Panel Segments
GE
NE
SIS
G1
Panel SegmentsPower/Telecom
PSD1424 13 7/16 23 5/8 3.6 PSD1430 13 7/16 29 5/8 4.3 PSD1436 13 7/16 35 5/8 5.2 PSD1442 13 7/16 41 5/8 6.1 PSD1448 13 7/16 47 5/8 6.9
PSD1824 18 1/8 23 5/8 4.2 PSD1830 18 1/8 29 5/8 5.1PSD1836 18 1/8 35 5/8 6.1PSD1842 18 1/8 41 5/8 7.1 PSD1848 18 1/8 47 5/8 8.1
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Contains knowouts for both power and telecommunications outlets.35 Sound Transmission Coefficient.20 gauge, cold rolled steel casting.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.Can be reupholstered in the field.
SPECIFY:
Product Number, Quantity, Fabric
13
Panel SegmentsMarker Board
PSM1418 13 7/16 17 5/8 2.0 PSM1424 13 7/16 23 5/8 2.4 PSM1430 13 7/16 29 5/8 2.9 PSM1436 13 7/16 35 5/8 3.5 PSM1442 13 7/16 41 5/8 4.1 PSM1448 13 7/16 47 5/8 4.6
PSM1818 18 1/8 17 5/8 2.1 PSM1824 13 1/8 23 5/8 2.4 PSM1830 18 1/8 29 5/8 3.4PSM1836 18 1/8 35 5/8 4.1PSM1842 18 1/8 41 5/8 4.8 PSM1848 18 1/8 47 5/8 5.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
High gloss white finish.Markers not included.Removable/replaceable (no tools required).
SPECIFY:
Product Number, Quantity
NOTE:
Use dry erase markers only.Clean only with approved marker board cleaner.
Panel SegmentsG
EN
ES
IS G
1
Panel SegmentsWood Grain
PSW0918 9 17 5/8 2.0 PSW0924 9 23 5/8 2.4 PSW0930 9 29 5/8 2.9 PSW0936 9 35 5/8 3.5 PSW0942 9 41 5/8 4.1 PSW0948 9 47 5/8 4.6
PSW1418 13 7/16 17 5/8 3.0 PSW1424 13 7/16 23 5/8 3.6 PSW1430 13 7/16 29 5/8 4.3 PSW1436 13 7/16 35 5/8 5.2 PSW1442 13 7/16 41 5/8 6.1 PSW1448 13 7/16 47 5/8 6.9
PSW1818 18 1/8 17 5/8 3.3PSW1824 18 1/8 23 5/8 4.2 PSW1830 18 1/8 29 5/8 5.1PSW1836 18 1/8 35 5/8 6.1PSW1842 18 1/8 41 5/8 7.1 PSW1848 18 1/8 47 5/8 8.1
PSW2418 23 1/2 17 5/8 4.2PSW2424 23 1/2 23 5/8 5.4 PSW2430 23 1/2 29 5/8 6.6PSW2436 23 1/2 35 5/8 7.9PSW2442 23 1/2 41 5/8 9.1 PSW2448 23 1/2 47 5/8 10.4
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
14
Panel SegmentsAirflow
PSA1418 13 7/16 17 5/8 2.2 PSA1424 13 7/16 23 5/8 2.5 PSA1430 13 7/16 29 5/8 3.2 PSA1436 13 7/16 35 5/8 3.8 PSA1442 13 7/16 41 5/8 4.4 PSA1448 13 7/16 47 5/8 5.1
PSA1818 18 1/8 17 5/8 2.9PSA1824 18 1/8 23 5/8 3.4 PSA1830 18 1/8 29 5/8 4.1PSA1836 18 1/8 35 5/8 4.9PSA1842 18 1/8 41 5/8 5.7 PSA1848 18 1/8 47 5/8 6.5
PSA2418 23 1/2 17 5/8 3.5PSA2424 23 1/2 23 5/8 4.3 PSA2430 23 1/2 29 5/8 5.3PSA2436 23 1/2 35 5/8 6.3PSA2442 23 1/2 41 5/8 7.3 PSA2448 23 1/2 47 5/8 8.3
PRODUCT DIMENSIONS WEIGHT NUMBER W LB
DESCRIPTION:
Made from non tackable laminate Panel segment.
SPECIFY:
Product Number, Quantity, Finish
DESCRIPTION:
Powder coated paint finish.Perforated steel pan to allow air circulation.20 gauge, cold rolled steel casting.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.
SPECIFY:
Product Number, Quantity, Finish
Panel Segments
GE
NE
SIS
G1
Panel SegmentsClear Glass (Pair)
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
15
DESCRIPTION:
Aluminum frame with 5mm thick tempered glass.20 gauge, cold rolled steel interior trim.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.
SPECIFY:
Product Number, Quantity, Finish
PSG0918 9 17 5/8 15.9 PSG0924 9 23 5/8 19.8 PSG0930 9 29 5/8 24.8 PSG0936 9 35 5/8 29.9 PSG0942 9 41 5/8 35.0 PSG0948 9 47 5/8 40.1
PSG1418 13 7/16 17 5/8 19.9 PSG1424 13 7/16 23 5/8 24.8 PSG1430 13 7/16 29 5/8 31.0 PSG1436 13 7/16 35 5/8 37.4 PSG1442 13 7/16 41 5/8 43.7 PSG1448 13 7/16 47 5/8 50.1
PSG1818 18 1/8 17 5/8 24.8PSG1824 18 1/8 23 5/8 31.0 PSG1830 18 1/8 29 5/8 38.8PSG1836 18 1/8 35 5/8 46.8PSG1842 18 1/8 41 5/8 54.6 PSG1848 18 1/8 47 5/8 62.6
Panel SegmentsFrosted Glass (Pair)
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Aluminum frame with 5mm thick tempered glass.20 gauge, cold rolled steel interior trim.Removable/replaceable (no tools required).Class A interior wall and ceiling finish certified.
SPECIFY:
Product Number, Quantity, Finish
PSGF0918 9 17 5/8 15.9 PSGF0924 9 23 5/8 19.8 PSGF0930 9 29 5/8 24.8 PSGF0936 9 35 5/8 29.9 PSGF0942 9 41 5/8 35.0 PSGF0948 9 47 5/8 40.1
PSGF1418 13 7/16 17 5/8 19.9 PSGF1424 13 7/16 23 5/8 24.8 PSGF1430 13 7/16 29 5/8 31.0 PSGF1436 13 7/16 35 5/8 37.4 PSGF1442 13 7/16 41 5/8 43.7 PSGF1448 13 7/16 47 5/8 50.1
PSGF1818 18 1/8 17 5/8 24.8PSGF1824 18 1/8 23 5/8 31.0 PSGF1830 18 1/8 29 5/8 38.8PSGF1836 18 1/8 35 5/8 46.8PSGF1842 18 1/8 41 5/8 54.6 PSGF1848 18 1/8 47 5/8 62.6
Panel SegmentsG
EN
ES
IS G
1
Panel SegmentsEmbossed
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
16
Panel SegmentsAccessory Tile
PSE0918 9 17 5/8 2.0 PSE0924 9 23 5/8 2.4 PSE0930 9 29 5/8 2.8 PSE0936 9 35 5/8 3.4 PSE0942 9 41 5/8 4.0 PSE0948 9 47 5/8 4.5
PSE1418 13 7/16 17 5/8 2.4 PSE1424 13 7/16 23 5/8 3.1 PSE1430 13 7/16 29 5/8 3.8 PSE1436 13 7/16 35 5/8 4.5 PSE1442 13 7/16 41 5/8 5.2 PSE1448 13 7/16 47 5/8 5.9
PSE1818 18 1/8 17 5/8 3.2PSE1824 18 1/8 23 5/8 4.2 PSE1830 18 1/8 29 5/8 5.1PSE1836 18 1/8 35 5/8 6.1PSE1842 18 1/8 41 5/8 7.0 PSE1848 18 1/8 47 5/8 8.0
PSE2418 23 1/2 17 5/8 4.2PSE2424 23 1/2 23 5/8 5.4 PSE2430 23 1/2 29 5/8 6.6PSE2436 23 1/2 35 5/8 7.9PSE2442 23 1/2 41 5/8 9.1 PSE2448 23 1/2 47 5/8 10.4
Accessory Tile PSAC1418 13 7/16 17 5/8 4.5 PSAC1424 13 7/16 23 5/8 6.0 PSAC1430 13 7/16 29 5/8 7.5PSAC1436 13 7/16 35 5/8 9.9 PSAC1442 13 7/16 41 5/8 10.4PSAC1448 13 7/16 47 5/8 12.0
PSAC1818 18 1/8 17 5/8 5.9PSAC1824 18 1/8 23 5/8 7.9 PSAC1830 18 1/8 29 5/8 9.9PSAC1836 18 1/8 35 5/8 11.9PSAC1842 18 1/8 41 5/8 13.9PSAC1848 18 1/8 47 5/8 15.9
Accessory BarACB18 4 1/2 17 5/8 1.5ACB24 4 1/2 23 5/8 2.0 ACB30 4 1/2 29 5/8 2.5ACB36 4 1/2 35 5/8 3.0ACB42 4 1/2 41 5/8 3.5ACB48 4 1/2 47 5/8 4.0
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
Accessory Bar
DESCRIPTION:
Powder coated paint finish.20 gauge, cold rolled steel casing.Removable/replaceable (no tools required).
SPECIFY:
Product Number, Quantity, Finish
DESCRIPTION:
Powder coated aluminum accessory tool rail tile.Removable/replaceable (no tools required).
SPECIFY:
Product Number, Quantity, Finish
Storage Units
GE
NE
SIS
G1
Storage Bins PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
17
Open Shelves
NOTE:
Overhead Storage is not recommended above first stackable panel frame.Storage bins with fabric doors are available.
SPECIFY:
Product Number, Quantity, Finish
SB24 24 15 5/8 13 15/16 33.0SB30 30 15 5/8 13 15/16 37.0 SB36 36 15 5/8 13 15/16 42.3 SB42 42 15 5/8 13 15/16 47.6 SB48 48 15 5/8 13 15/16 52.9 SB60 60 15 5/8 13 15/16 63.5
smooth sliding rail
SBG24 24 15 5/8 13 15/16 33.0SBG30 30 15 5/8 13 15/16 37.0 SBG36 36 15 5/8 13 15/16 42.3 SBG42 42 15 5/8 13 15/16 47.6 SBG48 48 15 5/8 13 15/16 52.9 SBG60 60 15 5/8 13 15/16 63.5
DESCRIPTION:
All overhead storage units accept Task Lights.16 gauge, steel side panels. 20 gauge steel flipper door.Powder coated paint finish.Lock standard at bottom center of flipper door.Accommodates domestic and international A4 Size binders.Flipper door stores on top of unit for increased interior clearance.Steel ball bearing door slides.Pivoting hinges minimizes opening radius for operation in space restricted applications.Safety interlock prevents dislodgment from panel connector slots.Hutch is standard w ith two flipper doors.Key alike and Master is optional.Smooth sliding rail is available.
Hutch
PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
DESCRIPTION:
Same as above.
SPECIFY:
Product Number, Quantity, Finish
OS24 24 9 13/16 13 1/8 20.5OS30 30 9 13/16 13 1/8 22.8OS36 36 9 13/16 13 1/8 25.0OS42 42 9 13/16 13 1/8 27.2OS48 48 9 13/16 13 1/8 29.4OS60 60 9 13/16 13 1/8 34.9
DESCRIPTION:
Same as above.
SPECIFY:
Product Number, Quantity, Finish
H60 59 7/8 35 14 313.9H66 65 7/8 35 14 340.8 H72 71 7/8 35 14 374.3
NOTE:
Freestanding. Tackboards not included.
PedestalsG
EN
ES
IS G
1
Floor-Supported PedestalsBox / Box / File
FP24BBF 14 3/4 27 1/16 23 1/2 67.5 FP30BBF 14 3/4 27 1/16 29 1/2 70.5
PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
DESCRIPTION:
16 gauge, steel double wall drawer construction.20 gauge, steel case construction.Powder coated paint finish.Lock standard at top right.Full width recessed drawer pull.4 leveling glides in base.Steel ball bearing drawer slides.Full extension file drawer.File drawers equipped for haning folders, letter front-to-back, letter side-to-side, or regal filling.Key alike is optional.
SPECIFY:
Product Number, Quantity, Finish
NOTE:
Open top required attachment under a worksurface.
18
Floor-Supported PedestalsFile / File
FP24FF 14 3/4 27 1/16 23 1/2 65.5 FP24FF 14 3/4 27 1/16 29 1/2 69.5
PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
DESCRIPTION:
Same as above.
SPECIFY:
Product Number, Quantity, Finish
Drawer Dividers
DD6 4 7/8 11 7/8 1.7 DD12 9 1/16 11 7/8 3.7
PRODUCT DIMENSIONS WEIGHT NUMBER H W LB
DESCRIPTION:
Dividers separates contents of box and file drawers.Color is black.
SPECIFY:
Product Number, Quantity
Pedestals
GE
NE
SIS
G1
Mobile PedestalsBox / Box / File
Box / Box / FileMP24BBF 14 11/16 26 5/8 23 1/2 75.5
File / FileMP24FF 14 11/16 26 5/8 23 1/2 75.5
Box / FileMP18BF 14 11/16 20 5/8 17 1/2 62.0MP24BF 14 11/16 20 5/8 23 1/2 73.2
PRODUCT DIMENSIONS WEIGHTNUMBER W H D LB
DESCRIPTION:
16 gauge, steel double wall drawer construction.20 gauge, steel case construction.Powder coated paint finish.2” black dual wheel casters.Lock standard at top right.Full width recessed drawer pull.Steel ball bearing drawer slides.Full extension file drawer.File drawers equipped for haning folders, letter front-to-back, letter side-to-side, or regal filling.Key alike is optional.
SPECIFY:
Product Number, Quantity, Finish
19
Mobile PedestalsFile / File
Mobile PedestalsBox / File
Lateral FilesG
EN
ES
IS G
1
PRODUCT DIMENSIONS WEIGHT NUMBER W H D LB
20
Two Drawer Lateral FilesLF230 30 28 3/8 17 3/8 80.0 LF236 36 28 3/8 17 3/8 98.0
Three Drawer Lateral FilesLF330 30 40 5/8 17 3/8 90.0 LF336 36 40 5/8 17 3/8 123.0
Four Drawer Lateral FilesLF430 30 53 17 3/8 139.0 LF436 36 53 17 3/8 160.0
Five Drawer Lateral FilesLF530 30 65 1/4 17 3/8 180.0 LF536 36 65 1/4 17 3/8 213.0
DESCRIPTION:
Locking freestanding lateral files accommodate letter, A4 and legal files.Free extansion steel ball-bearing slides and safety interlock system allow for inly one drawer to open at a time.On five-high Lateral Files, the top opening is a door that flips up to recede into the cabinet with a roll-out shelf.Leveling glides allow for 7/8” height adjustment.
SPECIFY:
Product Number, Quantity, Finish
Lateral FileOpen Top
PRODUCT DIMENSIONS WEIGHT NUMBER W H D LB
FPL30 29 1/2 27 1/16 23 1/2 117.8
DESCRIPTION:
Cold rolled steel. Powder coated paint finish.Lock and 2 keys included.Full width recessed drwer pulls. 4 leveling glides in base.Full extension, ball-bearing slides.File drawers equipped for hanging folders, letter front-to-back, letter side-to-side, or legal filing.
SPECIFY:
Product Number, Quantity, Finish
NOTE: Not designed for freestanding application. Drawer Dividers must be ordered separately.
Lateral FileFreestanding
Modesty Panels
GE
NE
SIS
G1
Modesty PanelsDouble Pedestals Desk
MPDP60 60 20.0 MPDP66 66 21.1 MPDP72 72 22.2
PRODUCT Worksurface Width WEIGHT NUMBER LB
21
DESCRIPTION:
20 gauge, steel construction.Cross braced for extra rigidity.Powder coated paint finish.Full-to-floor modesty panel.Wire access hole standard.
SPECIFY:
Product Number, Quantity, Finish
NOTE : Use with Floor-Supported Pedestals and Standard Worksurface in top size shown to make a freestanding Double Pedestal Desk.
Modesty PanelsSingle Pedestals Desk
MPSP60 60 22.2 MPSP66 66 25.6 MPSP72 72 31.1
PRODUCT Worksurface Width WEIGHT NUMBER LB
NOTE : Use with Floor-Supported Pedestals, End Panel support and Standard Worksurface in top size shown to make a freestanding Single Pedestal Desk.
Modesty PanelsSingle Pedestals Return
MPRP42 42 19.2 MPRP48 48 21.1 MPRP60 60 23.3
PRODUCT Worksurface Width WEIGHT NUMBER LB
NOTE : Use with Floor-Supported Pedestals and Standard Worksurface in top size shown to make a freestanding Single Pedestal Return.
Modesty PanelsG
EN
ES
IS G
1
22
Modesty PanelsOpen End Return
MPOE30 30 20.4 MPOE36 36 21.3
PRODUCT Worksurface Width WEIGHT NUMBER LB
DESCRIPTION:
20 gauge, steel construction.Cross braced for extra rigidity.Powder coated paint finish.Full-to-floor modesty panel.Wire access hole standard.
SPECIFY:
Product Number, Quantity, Finish
NOTE : Use with End Panel Support and Standard Worksurface in top size shown to make a freestanding Open End Return.
Modesty PanelsU-Bridge
MPUB36 36 21.7 MPUB42 42 22.2 MPUB48 48 23.8
PRODUCT Worksurface Width WEIGHT NUMBER LB
NOTE : Use with Standard Worksurface in top size shown to make a freestanding U-Bridge.
Modesty PanelsCorner Worksurface/Desk (Pair)
MPCD36 36 20.5 MPCD42 42 21.3
PRODUCT Worksurface Width WEIGHT NUMBER LB
NOTE : Use with two End Panel Supports, Corner Leg and Corner Worksurface in top size shown to make a freestanding Corner Worksurface/Desk.
Modesty PanelsShell Desk
MPSD60 60 32.2
PRODUCT Worksurface Width WEIGHT NUMBER LB
NOTE : Use with two End Panel Supports, and 60” worksurface to make a freestanding Shell Desk.
Worksurfaces
GE
NE
SIS
G1
Standard Worksurfaces PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
23
DESCRIPTION:
1 1/8” thickness.Composite wood core.Square edge design.3mm matching front edge.One grommet standard on Worksurfaces up to 48" wide.Two gormmets on worksurfaces 60" and wider.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Side Support (SS) or Cantilever Supports (CS/DCS).Specify Floor-Supported Pedestals (FP) and/or End Panel Support (EPS).
WSS2424 24 24 18.4WSS2430 30 24 22.9WSS2436 36 24 27.6WSS2442 42 24 33.4WSS2446 46 24 36.7WSS2460 60 24 45.9WSS2466 66 24 50.5WSS2472 72 24 55.1
WSS3024 24 30 22.9WSS3030 30 30 28.7WSS3036 36 30 34.4WSS3042 42 30 41.6WSS3046 46 30 45.9WSS3060 60 30 57.4WSS3066 66 30 63.1WSS3072 72 30 68.7
Corner Worksurfaces PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
CWST2436 24 36 39.1CWST2442 30 42 57.7CWST2448 36 48 65.8CWST3042 30 42 58.1CWST3048 30 48 66.2
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
WorksurfacesG
EN
ES
IS G
1
24
Peninsula Worksurfaces PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
DESCRIPTION:
1 1/8” thickness.Composite wood core.Square edge design.3mm matching front edge.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Post Leg (PL) and Side Supports (SS) and/or Cantilever Supports (CS/DCS).
PWST3060 60 30 51.8PWST3066 66 30 57.5PWST3072 72 30 63.2
Extended Worksurfaces PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
EWST48 51 3/16 27 15/16 39.1
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
Worksurfaces
GE
NE
SIS
G1
Curved, Corner Worksurfaces
25
PRODUCT DIMENSIONS WEIGHT NUMBER A B C D LB
CWC2436 24 24 36 36 39.1CWC2442 24 24 42 42 53.9CWC2448 24 24 48 48 71.2CWC2348 24 30 48 48 71.9CWC3248 30 24 48 48 71.9CWC3036 30 30 48 48 72.6
DESCRIPTION:
Curved design.1 1/8” thickness.Composite wood core.3mm matching front edge.Grommet is standard.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Side Support (SS) or Cantilever Supports (CS/DCS).
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
Extended, Corner Worksurfaces PRODUCT DIMENSIONS WEIGHT NUMBER A B C D LB
CWE2445L/R 24 24 48 60 65.3CWE2446L/R 24 24 48 72 74.5
CWE2345L/R 24 30 48 60 69.8CWE2346L/R 24 30 48 72 79.1
CWE3245L/R 30 24 48 60 76.8CWE3246L/R 30 24 48 72 117.7
CWE3045L/R 30 30 48 60 81.3CWE3046L/R 30 30 48 72 122.2
DESCRIPTION:
Curved and wrap-around design.1 1/8” thickness.Composite wood core.3mm matching front edge.Two grommets are standard.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Side Support (SS) or Cantilever Supports (CS/DCS).
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
Left-Hand
Right-Hand
WorksurfacesG
EN
ES
IS G
1
Extended ,Curved Corner Worksurfaces
26
PRODUCT DIMENSIONS WEIGHT NUMBER A B C D LB
CWEC2345L/R 24 30 48 60 75.8CWEC2346L/R 24 30 48 72 116.7
DESCRIPTION:
Curved and wrap-around design.1 1/8” thickness.Composite wood core.3mm matching front edge.Two grommets are standard.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Side Support (SS) or Cantilever Supports (CS/DCS).
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
Left-Hand
Right-Hand
PRODUCT DIMENSIONS WEIGHT NUMBER A B C LB
PWE2466L/R 24 48 66 76.9PWE2472L/R 24 48 72 82.6
DESCRIPTION:
Curved and wrap-around design.1 1/8” thickness.Composite wood core.3mm matching front edge.Grommet is standard.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Post Leg (PL) and Side Support (SS) and/or Double Cantilever Supports (CS/DCS).
NOTE : Not designed for freestanding applications. Worksurface supports must be ordered separately.
Extended, Peninsular Worksurfaces
Left-Hand
Right-Hand
Worksurfaces
GE
NE
SIS
G1
Teardrop Worksurfaces
TWS30 39 15/16 30 57.2
PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
DESCRIPTION:
1 1/8” thickness.Composite wood core.3mm matching front edge.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Trandaction Support Brackets (TS).
27
Transaction Surfaces
TS24 24 13 9.9 TS30 30 13 12.4 TS36 36 13 14.9 TS42 42 13 17.3 TS48 48 13 19.8 TS60 60 13 24.8 TS72 72 13 29.8
PRODUCT DIMENSIONS WEIGHT NUMBER W D LB
NOTE : Worksurface supports must be ordered separately.
DESCRIPTION:
1 1/8” thickness.Composite wood core.3mm matching front edge.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Post Leg (PL) and Double Cantilever Supports (CS/DCS) and/or Ell Bracket (LB) for panel-mounted applications.Specify Ell Bracket (LB) for freestanding applications.
NOTE : Worksurface supports must be ordered separately.
Worksurface SupportsG
EN
ES
IS G
1
End Support Bracket
ESB 3 1/2 20 3.3
DESB 3 1/2 20 3.8
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
28
Double End Support Bracket
Cantilever Supports
Double Cantilever Supports
Panel Supports Bracket
ESB
DESB
NOTE: (ESB) End Support Bracket supportse a Worksurface at the end when enclosed by a panel of greater depth.(DESB) Double End Support Bracket supports a Worksurface on each side of panel at ends when enclosed by a panel of greater depth.
Cantilever Supports (L/R)CSL 21 7 7/8 2.6 CSR 21 7 7/8 2.6
Double Cantilever SupportsDCS 21 7 7/8 3.5
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
NOTE: (DCS) Double Cantilever Supports joins Worksurface mounted at same height.Left of right Cantilever Supports are used to panel-mount either end Worksurface.
PSB 9 7/8 1 9/16 2.5
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
NOTE: (PSB) Panel Supports Bracket installs in panel connector slots and attaches to end of (EPS) End Panel Support or Floor-Supported Pedestals for added stability.
Worksurface Supports
GE
NE
SIS
G1
Side Supports (Pair)
29
SS 2 3/4 3 15/16 1.0
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
NOTE: (SS) Side Supports support a Worksurface at the end when enclosed by a panel of the same depth and to support a corner Worksurface at back corner.
Transaction Supports (Pair)
TS 4 1/2 3 1/4 0.8
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
Flat Brackets
FB3 3 2 1/4 0.5FB18 18 2 1/4 2.0
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
NOTE: (FB) Flat Brackets join primary Worksurface to return Worksurface.
Ell Bracket
LB 18 1 3/8 2.0
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
NOTE: (LB) Ell Bracket joins freestanding Corner Worksurface/Desk to return Worksurface and Teardrop Worksurface to side of Floor-Supported Pedestal.
Worksurface SupportsG
EN
ES
IS G
1
Angle Bracket
AB 21 7 7/8 2.6
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
30
Post Leg
NOTE: (AB) Angle Bracket installs on Peninsula Worksurface and attaches to center of (EPS) End Panel Support for added stabilty.
PL 27 1/16 8.8
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
NOTE: (PL) Post Leg supports freestanding Peninsula Worksurface, Teardrop or Extension Worksurface.
Corner Leg
CL 27 1/16 4.4
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
NOTE: (CL) Corner Leg supports freestanding back corner of Corner Worksurface, Corner Leg must be used with two Modesty Panels and two End Panel Support.
C - Leg
CLG 27 1/16 12.5
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
End Panel Supports
EPS 17 7/8 27 1/16 15.6 EPS 23 1/2 27 1/16 18.9EPS 29 1/2 27 1/16 22.2
PRODUCT DIMENSIONS WEIGHT NUMBER D W LB
DESCRIPTION:
20 gauge, steel double wall construction.Powder coated paint finish.Two adjustable glides.Attaching hardware is included for connection to Worksur-face.
SPECIFY:
Product Number, Quantity, Options, Finish
OPTION:
Specify Panel Support Bracket (PSB) for panel mounting application.Specify Modesty Panel (MP) for freestanding application.
Panel Hardware
GE
NE
SIS
G1
Wall Track (Pair) PRODUCT DIMENSIONS WEIGHT NUMBER H LB
31
DESCRIPTION:
10 gauge, cold heated steel, universal connector blocks.20 gauge, cold rolled steel, connector cover.Powder coated paint finish.Included connector hardware.
SPECIFY:
Product Number, Quantity, FinishSpecify & Order Top Cap serparately.
NOTE - PC400 consists of four blocks with connecting hardware
PC29042 41 1/2 4.8PC29048 46 1/8 5.8PC29056 55 1/16 6.7PC29065 64 3/8 7.6PC29083 82 1/2 9.3PC290120 119 1/2 12.7
Three-Way Panel Connector
PC342 41 1/2 4.8PC348 46 1/8 5.8PC356 55 1/16 6.7PC365 64 3/8 7.6PC383 82 1/2 9.3PC3120 119 1/2 12.7
Four-Way Panel Connector
PC400 3 1/8 2.7
Wall Starter
T-Mount Kit
Wall Starter
Power DistributionG
EN
ES
IS G
1
Cable Pole PRODUCT DIMENSIONS WEIGHT NUMBER H LB
32
Desk Height,Power adapter kit (Pair)
DESCRIPTION:
20 gauge, cold rolled steel.Powder coated paint finish.Contains a floor-to-panel receway for houosing electrical and telecommunications cable.Cut to size at installation site for lower ceilings.
SPECIFY:
Product Number, Quantity, Finish
CP83 83 8.4CP96 96 12.1CP120 120 15.1
PRODUCT DIMENSIONS WEIGHT NUMBER H LB
DESCRIPTION:
14 gauge, cold rolled steel.Powder coated paint finish.Field installed in panel frame.Allows attachment of Power Raceway at desk height.
SPECIFY:
Product Number, Quantity, Finish
DPAK 3 1/4 1.0
Ceiling Track
GE
NE
SIS
G1
Ceiling Track PRODUCT DIMENSIONS WEIGHT NUMBER W H D LB
33
DESCRIPTION:
20 gauge, cold rolled steel.Powder coated paint finish.Includes vertical access channels.
SPECIFY:
Product Number, Quantity, Finish
CT96 96 2 1/4 2 1/4 9.6CT120 120 2 1/4 2 1/4 12.3