(YDOXDWLRQVupgllc.com/maksteel2/wp-content/uploads/sites/11/...Optical Emission Spectroscopy ASTM...
3
ABS Quality Evaluations This is to certify that the Quality Management System of: Maksteel Processing LLC 4343 Wyoming Avenue Dearborn, MI 48126 U.S.A. ISO 9001:2015 The Quality Management System is applicable to: Certificate No: 59006 Effective Date: 14 May 2019 Expiration Date: 13 May 2022 Revision Date: 14 May 2019 This certificate may be found on the ABS QE Website (www.abs-qe.com). For certificates issued in the People's Republic of China information may also be verified on the CNCA website (www.cnca.gov.cn). TOLL PICKLING AND SLITTING OF FLAT ROLLED STEEL PRODUCTS Certificate Of Conformance
Transcript of (YDOXDWLRQVupgllc.com/maksteel2/wp-content/uploads/sites/11/...Optical Emission Spectroscopy ASTM...
ABS Quality EvaluationsThis is to certify that the Quality Management System of:
Maksteel Processing LLC
4343 Wyoming Avenue
Dearborn, MI 48126U.S.A.
ISO 9001:2015
The Quality Management System is applicable to:
Certificate No: 59006
Effective Date: 14 May 2019
Expiration Date: 13 May 2022
Revision Date: 14 May 2019
This certificate may be found on the ABS QE Website (www.abs-qe.com). For certificates issued in the People's Republic of China information may also beverified on the CNCA website (www.cnca.gov.cn).
TOLL PICKLING AND SLITTING OF FLAT ROLLED STEEL PRODUCTS
Certificate Of Conformance
(A2LA Cert. No. 1829.01) 01/29/2020 Page 1 of 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
MAKSTEEL USA 5875 Weller Court, SW Wyoming, MI 49509
Jamie Rego Phone: 734-256-7237
MECHANICAL
Valid To: December 31, 2021 Certificate Number: 1829.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on metals and alloys:
Tests Test Methods
Hardness Rockwell (B, 30T) ASTM E18
Tensile (Flat Metal, ≤ 22,500 lbs) ASTM A370, E8; JIS Z2241; Plastic Strain Ratio (r-value) ASTM E8, E517; JIS Z2254; Work Hardening Exponent (n-value) ASTM E646; JIS Z2253
Chemical Optical Emission Spectroscopy ASTM E415 (Except Glow Discharge); (Carbon/Low Alloy Steel: Al, B, C, Cr, Cu, Mn, Mo, LSC-WI-005 Nb, Ni, P, S, Si, Ti, V, W)
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
MAKSTEEL USA Wyoming, MI
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 29th day of January 2020. _______________________ Vice President, Accreditation Services For the Accreditation Council Certificate Number 1829.01 Valid to December 31, 2021
