EXCLUSIVEratavagroup.com/wp-content/uploads/2018/02/Ratava...of choice for the following dental...
Transcript of EXCLUSIVEratavagroup.com/wp-content/uploads/2018/02/Ratava...of choice for the following dental...
E X C L U S I V E
855.472.8282 www.RatavaGroup.com
1
About UsThe Ratava Group (RG) is based in sunny Tampa, Florida. RG is focused on providing exceptional products for the dental CAD/CAM market in North America.
RG is OBSESSED with excellent customer service. The CAD/CAM industry is competitive. RG believes that the key to success is to provide the best, most personable customer service possible.
Products
"The Ratava Group developed a sincere relationship with us and has become a respected partner in our circle of key vendors. Allison and her team put forth an incredible e�ort in researching what they bring to the table for labs. We trust them to provide us with exceptional materials, like Kerox Zirconia and Merz Dental PMMA, for use in our daily production. Whether we need a last-minute overnight order or our standard inventory upkeep, RG is ready for us."
Robert ShaferCAD/CAM Technologist - Bay View Dental Lab
Accessories . . . . . . . . . . . . . . . . . . 18-19Alloy Ingots . . . . . . . . . . . . . . . . . . . . . 10Artificial Denture Teeth . . . . . . . . . . 16-17Chrome Cobalt . . . . . . . . . . . . . . . . . . . 8Milling Tools . . . . . . . . . . . . . . . . . . 20-21PEEK BioSolution® . . . . . . . . . . . . 14-15PMMA Multilayer . . . . . . . . . . . . . . . . 11PMMA . . . . . . . . . . . . . . . . . . . . . . . 12-13Staining Liquids . . . . . . . . . . . . . . . . . . 4Titanium . . . . . . . . . . . . . . . . . . . . . . . . 9Wax . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Zirconia . . . . . . . . . . . . . . . . . . . . . . . . 4-7
2
2
Burns out cleanly with no residue
Contains NO resin components
Can be used as injector wax
Easy to carve and modify
Easy to cast and press
Can be recycled
Perfect for aesthetic diagnostic cases
Great for calibration wax
Semi-Translucent White
Easy to mill
This ideal wax material is versatile, easy to use, and has a unique flexibility, which allows the crowns to adapt
flawlessly to framework.
Wax Discs
Wax Sizes
Diameters (mm)
98 WITH Step Ring (Beige)
98 WITH Step Ring (White)
100 WITH Step Ring (Beige)
Heights (mm)
1412 16 18 20 25
1412 16 18 20 25
141210 16 18 20 25
Wax
3
Zirconia
GOOD TO KNOW:
Red, brown, grey and green colors are more vivid than other competitors
Optimal dip time is 30 seconds (UHT) and 1 minute (HT)
Water based and alcohol free so it does not evaporate
Absorbs deep and doesn’t leave spots on the surface
Optimized for translucent zirconia materials
Perfectly matches all 16 VITA shades
Can be used in any sintering furnace
Dry before sintering
Pre-sintering staining: Stains, Effects and Markers This coloring liquid is the perfect solution for staining pre-sintered milled crowns and multi-unit bridges.
Stains
Use before sintering
Obtainable colors:
IMA: Intelligent Multilayer Advancer
Cervical & Fissures: Brown
Gingival: Light & Dark Pink
Translucency: Blue & Grey
E�ectsMulti-brushing and multi-layering
Obtainable colors:
Brown
Blue
Red
Markers
Zirc
onia
44
Vickers Hardness
Flexural Strength
Radioactivity
Density (post-sintering)
CTE
1250 HV
761 MPa
0.012Bq/g
6.03 g/cm3
7.27 x 10-6
Vickers Hardness
Flexural Strength
Radioactivity
Density (post-sintering)
CTE
1250 HV
1371 MPa
0.028Bq/g
6.08 g/cm3
10.6 x 10-6
All Zirconia products are FDA (510k) approved
Full monolithic Zirconia is the technician’s choice for
crown and bridge restorations. The material requires
minimal tooth preparation, doesn’t wear on opposing
teeth, is virtually unbreakable and extremely life-like. In
acc. ISO 13485.
High Translucent
Ultra High TranslucentGreat for full contour anterior & posterior restorations, inlays, onlays, and crowns
Lowest radioactivity on the market
Most Translucency available
Diameter (mm) Height (mm)
100 WITH Step Ring 10 12 14 16 18 20 25
71 D-Shape 10 12 14 16 18 20 25
95 WITH Notches 10 12 14 16 18 20 25
98 WITH Step Ring 10 12 14 16 18 20 25
Zirconia Sizes
Full contour long span bridges, inlays, onlays, and crowns
Highest fracture toughness of any zirconia on the market
Perfect shrinkage
High translucent
Zirc
onia
5
Multi-Layer6 layers of natural gradient colors from cervical to
incisal and high translucency for life-like esthetics.
Available in shades A2, A3, B1, C2 and D2 (other shades
available upon request).
Multi-Layer UTML: 700 MPaFull contour crowns and bridges up to 3 units for anterior restorations
Super translucent
Multi-Layer HTML: 1000 MPaFull contour crowns, frameworks and long span bridges
Super strong for unparalleled mechanical properties
Perfect shrinkage
All NEW!
Diameter (mm) Height (mm)
71 D-Shape 14 20
98 WITH Step Ring 14 20
Zirconia Sizes
Zirc
onia
6
6
Pre-Shaded ZirconiaFull contour, frameworks, inlays, onlays, crowns and bridges
Highest fracture toughness value available on the market
Available for most milling systems
Shade Range H1-H4
Perfect shrinkage
High Translucent
Pre Sinter Post Sinter & GlazeA1 H1 H1A2 H1 H2(!)A3 H2 H2A3.5 H4 H4A4 H4 H4B1 H1 H1B2 H3 H3B3 H3 H4(!)B4 H4 H4C1 H1 H1C2 H3 H3C3 H3 H3C4 H4 H4D2 H3 H3D3 H2 H3(!)D4 H3 H3
Pre-Shaded Color Chart
Zirc
onia
7
The engineering of the non-precious discs allows for precisely-milled and cost-effective CAD/CAM solutions, as only the purest, most durable materials are used in production. Because they are homogeneous, the CoCr discs are less affected by heat and will mill uniformly. In acc. ISO 13485.
CoCr Type 4 discs are ideal for full crowns, bridges, soldering, and bars.
Yield Strength
Tensile Strength
Vickers Hardness
Density
Elongation
CTE
325 MPa
525 MPa
285 HV
8.5 g/cm3
14.7%
14.5 x 10-6 K-1
128 10 13.5 15 16 18 20 24.598 WITH Step Ring
Diameters (mm) Heights (mm)
Chrome Cobalt (Type 4) Sizes
Biocompatible (Nickel and Beryllium Free)
Soft and homogeneous due to a unique heat treatment during production
High tensile strength
High-heat-resistant
Corrosion-resistant
Compatible with most porcelain systems (verify CTE)
Health Canada Approved
88
Biocompatible (Nickel and Beryllium Free)
Easy to mill
Light weight
High tensile strength
Corrosion-resistant
X-Ray radio-lucent
Low thermal conductivity (15x lower than gold)
Because of the osseointegrative properties, Ti Grade 5 (T1-6-4 or Ti-6A1-4v) is the material of choice for the following dental implant applications: implant abutments, bars, Hader
bars, hybrid bars and frames, copings, full crowns and bridges.
Yield Strength
Tensile Strength
Vickers Hardness
Density
Elongation
CTE
760-850 MPa
525-985 MPa
310 HV
4.4 g/cm3
8-14%
12.4 x 10-6K-1
128 10 14 15 16 18 20 2598 WITH Step Ring
Diameters (mm) Heights (mm)
Titanium (Grade 5) Sizes
Health Canada Approved
9
Casting Bonding Alloys
KERA®GEN (Type 4)
KERA®C (Type 5)
Main Metall® (Type 5)
Chrome-Cobalt-Based Alloys for Fixed Restorations
KERA®N (Type 3)
KERA®NH (Type 3)
Nickel-Based Alloys for Fixed Restorations
Partial Denture AlloysROBUR 400® (Type 5)
DENTIUM® (Type 5)
TENER 350® (Type 5) TENER IT® (Type 5)
Chrome Cobalt-Based Alloys for Removables
Allo
y In
gots
1010
Multi-Layered PMMA
Available in Vita®: A1-4, B1-2, C1-3, D2-3, & BL2
Natural fluorescence
Biocompatible
Great for cases requiring high aesthetics
Tensile Strength
Flexural Strength
Density
Module of Elasticity
Absorption
.75 MPa
>100 MPa
1.18 g/cm3
>2,200 GPa
< 20 µg/mm³
“This PMMA gives me everything I look for in a restorative material - consistency, quality, and e�ciency. The shades and color blending are as impressive as they are reliable and the material itself handles beautifully. Rarely have I seen a significant decrease in labor coincide with such a dramatic elevation in quality.” -Jason G., Director of Esthetics at YES! Dental in Tarrytown, NY
Turn page for MORE PMMA options!
Multi-Layered PMMA Sizes
Diameters (mm) Heights (mm)
98 WITH Step Ring 16 2520
95 WITH Notches 16 20 25
71 D-Shape 20
Each disc has five gradient layers of color from cervical to incisal that are evenly distributed in order to create a natural, highly aesthetic appearance. This PMMA can be used for short or long-term crown and bridge temporaries, denture teeth veneers, and healing abutments.
PMM
A
11
High Translucent & Clear PMMA Sizes
Diameters (mm) Heights (mm)
98 WITH Step Ring 16 20
16 95 WITH Notches (Trans & Clear) 2520
Flexural Strength
Density
Module of Elasticity
Solubility
Absorption
91.5-96.6 MPa
1.19 g/cm3
2.773 GPa
0.2 µg/mm3
26.5 µg/mm3
PMMA CAD/CAM Discs The MP-M® Disc is made using NO inorganic fillers or fibers. The highly cross-linked organic polymer network is the strongest, most dense, and tissue-friendly material on the market.
A. Competitor PMMA chips at wall thicknesses <200 µm
B. The MP-M® Disc is 1.5x stronger, which allows for a wall thickness 4x thinner (<50 µm)
AB
All 16 Vita® ShadesPlus 4 Bleach
Copyright © 2014 Merz Dental
Long-term use okay up to three years
Temperature-resistant up to 300°C
Available in High Translucent
Abrasion-resistant
Plaque-resistant
Stain-resistant
PMM
A
12
12
Great for Denture-Based Restorations
Temperature-resistant up to 300°C
Plaque-resistant
Abrasion-resistant
Stain-resistant
Long-term use OK
The MP-M® Disc
Competitor PMMA
Medical-Grade Clear PMMAThe ONLY Medical-Grade Clear in the WORLD
Can be used for long-term temporaries, orthodontic splints, bite splints, night guards, implant drilling templates, surgical stents, etc.
Gingival-Shaded PMMA
“Before this PMMA, I had few choices and NO bleach shades for my Zirkonzahn mill. The extreme aesthetics, strength, and stain and abrasion-resistant properties helped to
dramatically increase and change my business! There’s no turning back!”-CAD/CAM Manager in Nevada
Copyright © 2014 Merz Dentalartegral® denture teeth now available! See page 16 &17
PMM
A
13
PEEK BioSolution®All NEW!
PEEK BioSolution® has an ideal combination of biocompatibility, definitive asesthetics and maximum loading capacity. PEEK (PolyEtherEtherKetone) is the premium solution for the biological balance of denture base and restorative material. This proven medical-grade quality material is also used as a reliable surgical endoprosthetic implant and is currently the “must have" dental CAD/CAM choice for manufacturing high-end medical device class products.
Telescopic primary & secondary crowns and frameworks
Secondary bar structures
Bridge substructures
Tertiary constructions
Crowns & bridges
Crown copings
Indications
PEEK
Bio
Solu
tion
®
1414
Human bone-like elasticity & homogeneous crystallization
Long term permanent treatment (wear resistant)
95mm, 98mm & 100mm diameters available
High flexural strength & light weight
Provides strong mechanical fixation
White & A2/B2 Shades available
Anti-Allergenic
Sterilizable
Flexural Strength
Elasticity/Flexural Modulus
Vickers Hardness
Water Absorption
Fracture Toughness
200 MPa
5100 MPa
32 HV 0.2
0.4%
4.71 MPa x √m
Features & Benefits
PEEK
Bio
Solu
tion
®
15
artegral®
Artificial Denture Teethartegral® Denture Teeth are available in fully anatomical 5-layered anteriors and 4-layered posteriors. These 100% German made premium teeth are made of filler-free Organic Modified Polymer-Network (OMP-N®), color stable and can be used as burnout teeth.
Over 800 combinations of shape, size and shade available for a perfect match.
AnteriorIdeal for hybrid and implant constructions as well as for full and partial prosthetics
Full bodied, like a natural tooth
Perfect light refraction
Plaque resistant
Life-like layers
Art
ifici
al D
entu
re T
eeth
1616
“Working with The Ratava Group is a pleasure! They not only have great products, but their service is second to none. They are always friendly and eager to help; definitely an asset to my business. The artegral® tooth line is superb. The artificial tooth is so close to a natural tooth and is easy to set up.” -Eric Johnson, Smiledezign in Tampa, FL
Preventive Shift Groove (PSG®)
Posterior Fully anatomical, cusp angle 25°
Full bodied, like a natural tooth
Clear centric for natural and artificial antagonists
Time-saving handling: basal shaped, integrated set-up aid
Ideal for partial, complete, combined and hybrid denture prosthetics
Plaque resistant
Art
ifici
al D
entu
re T
eeth
17
Accessories Ultra Fine Diamond Polishing Paste This polishing paste is economical and easy to use. The perfect finishing touch for any restoration…fixed or removable.
Can be used on PMMA, acrylics, zirconia, ceramics, porcelain, & all metalsOnly requires 1-2g of paste per caseDistributes evenly & smoothlySplatter-proof & leaves no greasy residue behindSold in 30g jar
DentMill Adapter Ring RG understands the lab’s need and desire to diversify and use other materials. Our metal adapter ring allows technicians whose mill requires a 100mm disc with step ring to use alternate material sizes.
Easy to useEasy to remove
ReusableFor use with 98mm CAD/CAM discs
Sintering Beads & Trays
2mm diameterSmooth finish prevents jamming/wedging between bridge unitsWorks with all sintering ovensSmall & large stackable sintering trays available
Extremely smooth Sintering Beads help to control the shrinkage rate and provide support to single units and bridges during the sintering process.
Acc
esso
ries
1818
Scan SprayWhite Scan Spray is ideal for matting wax-ups and translucent surfaces.
Available in whiteFine, even distributionEasily removed by water or steamSold in 200ml can
Occlusal SprayGreen Occlusal Spray with brass spray nozzle is perfect for an accurately defined and steady paint film.
Available in greenIndicated for model applicationsFine, even distribution
Dries quicklyEasily removed by waterSold in 75ml can
BDImpress®BDImpress® is softened in hot water to form a moldable material that hardens to a solid plastic. BDImpress® can be re-softened and reshaped to the desired impression or until bite registration is achieved.
Can be fabricated directly in the mouth Smooth, glossy surface requires no polishing No mixing or chemical polymerization 5 minute bench set, or immediate setting in cold waterOdorless and reusableHigh levels of accuracy and precise detailQuick fabrication of base plates with no complex equipment A
cces
sori
es
19
Shank
d1
4mm0.50.6*0.81.0*1.52.0*2.53.0
Shank
d1
3mm0.50.6*0.81.0*1.52.0*3.0
Shank
d1
3mm0.81.01.52.02.53.0
6mm1.02.02.53.0
- -
*suggested tooling strategy
*suggested tooling strategy
BruxZir, Cadblu ezMill, Jensen M200,MASTERmill, Schütz Tizian Cut eco plus,
vhf K Series, Wieland Mini
KaVo Everest
Roland
Datron, DMG, imes-icore, Jensen M500, Lava, Schütz Tizian Cut 5, vhf S Series, Wieland, Zubler
Shank
d1
6mm1.02.02.53.0
Zirc
onia
A variety of tools for roughing, semi-finishing, and finishing are available for milling Zirconia, Titanium, Chrome Cobalt, PMMA, and Wax. The coating and use of a specific grade of material is the key to maximizing precision, accuracy, tool life, as well as the integrity of the restorations.
Stop ring or collar is available on request
Milling
20
20
Shank
d1
3mm1.01.52.02.53.0
1.01.52.02.53.0
4mm 6mm1.01.52.02.53.0
Datron, DMG, imes-icore, Schütz
KaVo Everest
Shank
d1
6mm1.02.03.0
Chr
ome
Cob
alt &
Tita
nium
*suggested tooling strategy
Roland
Shank
d1
4mm0.50.6*0.81.0*1.52.0*2.53.0
Shank
d1
3mm0.50.60.81.01.52.02.53.0
6mm1.02.02.53.0
- - - -
BruxZir, Datron, DMG, imes-icore, Jensen, Lava, MASTERmill, Schütz, vhf, Wieland, Zubler
PM
MA
& W
ax
d1
shank
Tools
Guaranteed to outlast your current bursAccommodates most mills and tooling strategiesDiamond-coated & uncoated bursDiamond-coated burs have 10,000 HV vs. 2,000 HV of competitorsDiamond-coated burs perform up to 700°C vs. 350°C of competitorsHighest quality and strength on the market A
ll C
omp
anie
s ar
e R
egis
tere
d T
rad
emar
ks.
21
Notes
22
22
Notes
23
The Ratava Group is the "one-stop-shop"
for all of your CAD/CAM needs.
22018v5
855.472.8282 www.RatavaGroup.com
24