- High quality - - High loading capacity - - Worldwide ... Made in Germany ! ," , - High loading...
Transcript of - High quality - - High loading capacity - - Worldwide ... Made in Germany ! ," , - High loading...
www.saenger-rollenlager.com
Made in Germany !
- High loading capacity -- Low installation height -
- Dimensional adaptability -
- High quality -- Worldwide approved -
Sänger Rollenlager
GmbH & Co. KG
35645 Waldsolms - Germany -
Postbox 41
Phone: (0049) 6085 98 13 0
Fax: (0049) 6085 98 13 50
www.bergab.ru Берг АБ [email protected] Тел.(495)-228-06-21,факс (495) 223-3071
www.saenger-rollenlager.com
ROW / S
ROH / S
ROW / Wa
ROH / Wa
ROH / W9
Type Rollers Cage Application areasmax.
rotation speed
ROW / S
self-hardened rollers sup-ported at both ends by a journal guide in fl at steel rings with enough play Flat steel rings fastened toge-
ther permanently by rivetted pins
For light or medium loa-ding applications
ca. 800 r.p.m
ROH / S hardened and by request ground rollers.
For heavy loading applica-tions and a rotation speed
> 800 r.p.m.ca. 2000 r.p.m
ROW / Wa
self-hardened, ground or polished steel rollers held
at both ends in milled roller pockets
Milled brass rings fi rmly fa-stened to one another by rivet pins serve as side holders for
the rollers
For heavy and intermittent loading applications (most-ly for engine and apparatus
construction)
ca. 800 r.p.m
ROH / Wahardened and ground preci-sion rollers held at both ends
in milled roller pocketsca. 2000 r.p.m
ROH / W9
hardened and ground precisi-on rollers held in completely
milled, cylindrical roller pockets
Completely closed brass cage with a riveted ring at one end
For extreme heavy loading application – It can also take up axial load to a
slight extent
ca. 2500 r.p.m
Scope of supply: • All types can be offered in nearly every metric and inch dimension • Special tolerances on request • Special materials on request ( for example high temperature steel or special rust and acid steel) • Roller Bearings according to DIN 5402 / Roller Bearings Assemblies on request • Roller Bearings type “Baltzer” on request • Split Roller Bearings on request
Installation tolerance: d = ISA f7 D = ISA F7
www.bergab.ru Берг АБ [email protected] Тел.(495)-228-06-21,факс (495) 223-3071
www.saenger-rollenlager.com
ROW / K
ROH / K
RON / K
ROW / P
ROH / P
RON / P
ROK / K
Type Rollers Cage Application areasmax.
rotation speed
ROW / KSelf-hardened rollers supported
over the entire length by the pockets and surrounded by the
polyamide cage
Polyamide cage with a pre-cision axial roller guidance, extremely quite, extremely
high resistance to distortion, high cage abrasion resistance and resistance to chemicals
For light or medium loa-ding applications
ca. 800 r.p.m
ROH / K Hardened and by request ground rollers
For upper loading applica-tions and a rotation speed
> 800 r.p.mca. 2000 r.p.m
RON / K Rollers from rust and acid resistant steel For light or medium loa-
ding applications, where steel is not applicable.
ca. 800 r.p.m
ROK / K Rollers from polyamide ca. 800 r.p.m
ROW / PSelf- hardened rollers held at both ends in cylindrical roller
pockets Side rings from polyamide permanently connceted with one another by steel pins of
the required length
like ROW / K ca. 800 r.p.m
ROH / P Hardened and by request ground rollers
like ROH / K ca. 2000 r.p.m
RON / P Rollers from rust and acid resistant steel
like RON / K ca. 800 r.p.m
Scope of supply: • All types are available in nearly all current dimensions •Special dimensions on request, depending on quantity •Availability of a special cage for extreme stability
* max. Temperature 80° C
Ordering information: Designation of type – Outer diameter (OD) – Inner diameter (Id) – Length ( l ) – Roller diameter ( dr )
www.bergab.ru Берг АБ [email protected] Тел.(495)-228-06-21,факс (495) 223-3071
www.saenger-rollenlager.com
Sänger Rollenlager
GmbH & Co. KG
35645 Waldsolms - Germany -
Postbox 41
Phone: (0049) 6085 98 13 0
Fax: (0049) 6085 98 13 50
More products from Sänger Rollenlager:
Sled Roller Bearings Roller Bearing Assemblies Roller Bearing
according DIN 5402
Housing Assemblies RAL
Solid Precision Sleeves Spacer sleeve Synthetic Parts
Split Sleeves
www.bergab.ru Берг АБ [email protected] Тел.(495)-228-06-21,факс (495) 223-3071