. Heating Equipment/Magic-Pak.… · MAGIC-PAK Revised une • Replaces May ECCO Supply™ 2-1...

MAGIC-PAKwww.magic-pak.com

Revised: June 2015 • Replaces: May 2013

ECCO Supply™ www.eccosupply.ca 2-1

Expert Service. Quality Products. Since 1960.

This section contains product information only. For additional information and product pricing please contact your local ECCO Supply™ Sales Branch.

For Technical & Warranty information see www.magic-pak.com

INDEXINTRODUCTION ................................................................................................................................................................ 2-2M-SERIES PACKAGED THRU-THE-WALL UNITS

MCE4 — ELECTRIC HEATING / ELECTRIC COOLING ..................................................................................... 2-3MHP4 — ELECTRIC HEAT PUMP ........................................................................................................................... 2-4

V-SERIES PACKAGED THRU-THE-WALL UNITSEWC — ELECTRIC HEATING / ELECTRIC COOLING ....................................................................................... 2-6HWC — GAS HEATING / ELECTRIC COOLING ................................................................................................. 2-5

WALL SLEEVES ................................................................................................................................................................... 2-7



– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice – All Taxes Extra – May not be Available at All Branches –

ECCO Supply™2-2 www.eccosupply.ca

YEAR-ROUND COMFORT CONTROL... IN ONE COMPLETE PACKAGEDesigned by and for Architects, Engineers, Developers, Constructors

Conventional Split System Installation Requirements Thru-the-Wall Magic-Pak... Easy Installation 1. Uncrate and set furnace. Uncrate and set unit.2. Uncrate and set condensing unit. No!3. Uncrate and erect cooling coil plenum. No!4. Uncrate and set cooling coil. No!5. Run refrigerant lines. No!6. Connect, purge and evacuate refrigerant lines. No!7. Provide “B” vent from unit through roof (gas furnace installation). No!8. Provide roof jack and flashing for gas vent. No!9. Provide combustion air supply. No!10. Cut return air opening into furnace casing. No! It’s provided.11. Cut supply opening into coil plenum. No! It’s provided.12. Provide gas line and connect it at furnace location. Yes. (Gas / Electric only)13. Provide a condensate drain at furnace location. Yes.14. Provide drain line from cooling coil to condensate drain. Drain line included with unit.15. Provide power wiring from panel to condensing unit, 1 phase, 230V, 60 Hz. No!16. Provide weatherproof disconnect at condensing unit. No!17. Provide power connection into furnace, 1 phase, 120V, 60 Hz. Provide 1 phase, 230V, 60 Hz18. Provide low voltage connection from furnace to thermostat. Yes.19. Provide low voltage control wiring from furnace to condensing unit. No!20. Provide pad for condensing unit. No!TOTAL: 20 TIME-CONSUMING STEPS TOTAL: 5 TIME-SAVING STEPS

Magic-Pak Comfort Control AdvantagesCompletely self-contained heating and cooling package: • No outside condenser • No external refrigerant lines • No separate cooling coil • No chimney or external flue

Features• Pre-wired and pre-charged• Low operating sound levels• Easy to install• Low installation and operating costs• GAMA and AHRI performance certified• Design certified direct vent appliance• Many different louver styles and colours available• 5-year limited warranty – parts

COMPARE WHAT YOU DON'T GET WITH MAGIC-PAKWhat you don’t get with Magic-Pak Thru-The-Wall combination units can save you time and expense as a builder or contractor.You actually eliminate 15 installation steps, and the time it takes to perform them. Time is money, and you will save both when you choose Magic-Pak products for your project.

You also eliminate unsightly vents, stacks and condensing units. Building lines remain as clean and uncluttered as they appeared on the architect’s rendering or model.Discover the difference in heating and cooling convenience for yourself. Pick Magic-Pak Thru-The-Wall Combination Heating ⁄ Cooling Units.





Features• Up to 10.4 EER cooling efficiency• Completely self-contained heating and cooling package • No outside condensing unit • No external refrigerant lines • No separate cooling coil• Pre-wired and pre-charged• Individually metered and controlled• Easy service access• Louver colour options to match building façade• Available with optional factory-installed ventilation air kit• Available with no electric heat

Refrigerant System• R410a refrigerant• High efficiency compressor• Copper tubing with enhanced fin coils

Cabinet• Fully insulated cabinet for quiet operation• Anti-microbial insulation in all air handling compartments

Blower• Four-speed permanently lubricated motor for low

maintenance, maximum efficiency and wide airflow range• PSC permanently lubricated motor for low maintenance

and maximum efficiency• Dynamically balanced blower with resilient motor mounts

for smooth and quiet operation• Internal washable filter

Controls• Colour-coded wiring for easy service• Fuse protection on 24V circuit• No heat models include 24V output to control external

heat source

Installation• Easy to install and service• Louver mounts flush to outside wall

M-SERIES PACKAGED THRU-THE-WALL UNITSMCE4 — ELECTRIC HEATING / ELECTRIC COOLINGElectric kW range of 3–10 kW and BTUH cooling range of 12,000–35,000

MODEL NUMBER GUIDE

Revision Code

P = 208/230v/60hz/1

L = Factory Installed Ventilation Kit

Series

NOMINAL COOLING CAPACITY12 - 12,000 Btuh 18 - 18,000 Btuh 24 - 24,000 Btuh 30 - 30,000 Btuh

kW - 0, 3, 5, 7, 10

M = Magic-Pak

CE = Coolin/Electric

4 = R410a Refrigerant

09 - Standard Efficiency10 - High Efficiency

3 M CE 4 09 18 1 F - P 1Model Number Guide





Features• Up to 10.0 EER cooling efficiency• Completely self-contained heating and cooling package • No outside condensing unit • No external refrigerant lines • No separate cooling coil• Pre-wired and pre-charged• Individually metered and controlled• Easy service access• Louver colour options to match building façade• Available with optional factory-installed ventilation air kit

Refrigerant System• R410a refrigerant• High efficiency compressor• Copper tubing with enhanced fin coils

Cabinet• Fully insulated cabinet for quiet operation• Anti-microbial insulation in all air handling compartments

Blower• Four-speed permanently lubricated motor for low

maintenance, maximum efficiency and wide airflow range• PSC permanently lubricated motor for low maintenance

and maximum efficiency• Dynamically balanced blower with resilient motor mounts

for smooth and quiet operation• Internal washable filter

Controls• Colour-coded wiring for easy service• Fuse protection on 24V circuit

Installation• Easy to install and service• Louver mounts flush to outside wall

M-SERIES PACKAGED THRU-THE-WALL UNITS (cont’d)MHP4 — ELECTRIC HEAT PUMPA COP of 3.0, BTUH cooling range of 12,000–34,800 and BTUH heating range of 11,000 – 34,600

Revision Code

P = 208/230v/60hz/1

F = Factory Installed Ventilation Kit

Series

NOMINAL COOLING CAPACITY12 - 12,000 Btuh 18 - 18,000 Btuh 24 - 24,000 Btuh 30 - 30,000 Btuh 36 - 30,000 Btuh

kW - 0, 3, 5, 7, 10

M = Magic-Pak

HP= Coolin/Electric

4 = R410a Refrigerant

09 - Standard Efficiency10 - High Efficiency

3 M HP 4 09 18 1 F - P 1

Model Number Guide





Features• High efficiency heating and cooling• Completely self-contained heating and cooling package • Microban® anti-microbial drain pan • No outside condensing unit • No external refrigerant lines • No separate cooling coil • No separate venting system• Pre-wired and pre-charged• Individually metered and controlled• Self-contained, replaceable, slide-out cooling chassis• Internal vent system (direct vent)• Freeze Shield™ condensate trap* with side or front

condensate connection**Patent Pending

Refrigerant System• High efficiency compressor• Copper tubing with enhanced fin coils

Heat Exchanger• Stainless steel primary and secondary heat exchanger and

transition box standard on high efficiency models

Blower• Multispeed motor for wide airflow range• ECM blower motor in high efficiency units• Dynamically balanced blower with resilient motor mounts

for smooth and quiet operation• Internal filter, optional MERV8

Controls• Colour-coded wiring for easy service• Diagnostic LED

Installation• Plug & Play like features

V-SERIES PACKAGED THRU-THE-WALL UNITSHWC — GAS HEATING / ELECTRIC COOLINGGas input heat capacity of 22,000 – 55,000 BTUH and a net cooling capacity of 12,000 – 30,000 BTUH

Revision Code

Series

NOMINAL COOLING CAPACITY12 - 12,000 Btu/hr 18 - 18,000 Btu/hr 24 - 24,000 Btu/hr 30 - 30,000 Btu/hr

P = 208/230 V - 60 Hz - 1 Ph

COOLING EFFICIENCY09 = 9.2 EER11 = Up to 11 EER

22 = 22,000 Btu/hr33 = 33,000 Btu/hr44 = 44,000 Btu/hr55 = 55,000 Btu/hr

H = Gas Heat

W = With

C = Electric Cooling

GAS HEAT EFFICIENCY9 = up to 95% TE

GAS HEAT FEATUREN = Stainless steel heat exchanger

R = Aluminized steel heat exchanger

GAS HEATING INPUT

H W C 9 N 55 11 P 18 A 1Model Number Guide





Features• Standard and high efficiency cooling• Completely self-contained heating and cooling package • Microban® anti-microbial drain pan • No outside condensing unit • No external refrigerant lines • No separate cooling coil• Pre-wired and pre-charged• Individually metered and controlled• Slide-out cooling chassis

Refrigerant System• High efficiency compressor• Copper tubing with enhanced fin coil

Blower• Multispeed motor for wide airflow range• ECM blower motor in high efficiency units, PSC blower

motor in standard efficiency models• Dynamically balanced blower with resilient motor mounts

for smooth and quiet operation• Internal filter, optional MERV8

Controls• Colour-coded wiring for easy service

Installation• Plug & Play like features

V-SERIES PACKAGED THRU-THE-WALL UNITS (cont’d)EWC — ELECTRIC HEATING / ELECTRIC COOLINGElectric kW range of 5–20 kW and BTUH cooling range of 12,000–30,000

Model Number Guide

Revision Code

Series

NOMINAL COOLING CAPACITY12 - 12,000 Btu/hr 18 - 18,000 Btu/hr 24 - 24,000 Btu/hr 30 - 30,000 Btu/hr

P = 208/230 V - 60 Hz - 1Ph

COOLING EFFICIENCY9 = 9.2 EER11 = Up to 11.0 EER

E = Electric Heat

W = Thru-the-Wall

C = Electric Cooling

HEATER SIZE05 = 5kW07 = 7kW10 = 10kW15 = 15kW

E W C 05 11 P 18 A 1





V-SERIES WALL SLEEVES• A wall sleeve is required

for every Magic-Pak installation

• Provides accurate opening during building construction

• Compatible with wood frame, cement block, poured concrete or metal stud walls

• 2", 6", 8", 10" and 12" sizes available

M-SERIES WALL SLEEVES• A wall sleeve is required for every

Magic-Pak installation• Provides accurate opening during

building construction• Compatible with wood frame,

cement block, poured concrete or metal stud walls

• 2", 6", 8", 10" and 12" sizes available

. Heating Equipment/Magic-Pak.… · MAGIC-PAK Revised une • Replaces May ECCO Supply™ 2-1...

Documents

Transcript of . Heating Equipment/Magic-Pak.… · MAGIC-PAK Revised une • Replaces May ECCO Supply™ 2-1...