· Effective Jan. 1, 2013. See for updated info.

Section 10

Contain-It™ Secondary Containment Piping System

Effective Jan. 1, 2013. See www.gfpiping.com for updated info.

Glossary

S = Contain-It™ Socket

SPG = Spigot End (same dimension as pipe outside diameter)

MPT = Male Pipe Thread

FPT = Female Pipe Thread

Product Line Description

39 Fittings 41 Pipe42 Accessories

The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and Conditions of Sale.

Not for Use with Compressed Air or Gases

DO NOT TEST with Air or Air over Water

GF Piping DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed air

or gases, or the testing of thermoplastic piping systems with compressed air or gases in above or below ground locations. The

use of GF Piping products in compressed air or gas systems automatically voids the warranty for such products, and their use

against our recommendation is entirely the responsibility and liability of the installer. GF Piping will not accept responsibility

for damage or impairment from its products, or other consequential or incidental damages caused by misapplication,

incorrect assembly, and/or exposure to harmful substances or conditions. The only exception to this recommendation is when

testing the Contain-It™ Secondary System or the Fuseal Squared™ Double Containment Piping System’s containment joints.


10.3

Contain-It™ Clear PVCPage

Contain-It Pipe 10.4

Contain-It Fittings 10.5

Contain-It Terminations 10.9

Contain-It Centralizers 10.11

Contain-It Accessories 10.12


Contain-It™ Clear PVC

^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable

10.4

Contain-It PipeSplit PipeSize[inch]

lengths[ft]

Part No. USD/ft Lift Qty[ft]

Mini-mum Or-der Qty[ft]

O.D.[inch]

Minimum I.D.[inch]

4 10 37L015040 * 20.32 360 60 4.215 3.5256 10 37L015060 * 42.46 120 20 6.275 5.375

Solid PipeSize[inch]

lengths[ft]

Part No. USD/ft Lift Qty[ft]

Mini-mum Or-der Qty[ft]

O.D.[inch]

Minimum I.D.[inch]

4 20 37L026040 * 11.52 520 20 4.215 3.8826 20 37L026060 * 24.26 340 20 6.275 5.782




10.5

Contain-It FittingsContainment Coupling - Standard, Split (S x S)Size[inch]

Part No. USD PackQty

C[inch]

G[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 4629-040 80.08 5 2.00 0.38 4.38 5.81 4.69 3.886 4629-060 120.12 5 2.75 0.38 5.81 8.19 6.88 5.97

Containment Coupling - Extended, Split (S x S)Maximum Gap: 5.50"Size[inch]


C[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 4629-040E 88.58 5 5.00 10.00 5.81 4.69 3.886 4629-060E 127.40 5 5.75 11.50 8.19 6.88 5.97

Containment Coupling - Reducing, Split (S x S)Size[inch]


C1[inch]

C2[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

6 x 4 4629-532 160.16 5 2.00 2.75 5.81 8.19 6.88 5.97




10.6

Containment 90° Ell, Split (SxS)Size[inch]


C[inch]

G[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 4606-040 104.34 5 2.00 2.44 5.81 4.69 3.886 4606-060 160.16 5 2.75 3.38 8.19 6.88 5.97

Containment 45° Ell, Split (S x S)Size[inch]


C[inch]

G[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 4617-040 104.34 5 2.00 1.00 5.81 4.69 3.886 4617-060 160.16 5 2.75 1.75 8.19 6.88 5.97

Containment Tee, Split (S x S x S)Size[inch]


C[inch]

G[inch]

H[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 4601-040 121.34 5 2.00 2.38 7.19 8.63 5.81 4.69 3.886 4601-060 175.94 5 2.75 3.44 10.25 12.44 8.19 6.88 5.97




10.7

Containment 45° Wye, Split (S x S x S)Size[inch]


C[inch]

G[inch]

GJ[inch]

L[inch]

N[inch]

W[inch]

O.D.[inch]

I. D.[inch]

4 4683-040 160.16 5 2.00 0.75 5.88 11.00 7.13 5.81 4.69 3.886 4683-060 230.54 5 2.75 1.81 7.75 15.19 9.75 8.19 6.88 5.97

Containment Cap, One Piece (S)Size[inch]


C[inch]

L[inch]

O.D.[inch]

4 4647-040 65.52 5 1.75 1.94 4.506 4647-060 95.86 5 2.75 3.19 6.75

Containment Female Adapter, One Piece (S x FPT)Size[inch]


C[inch]

L[inch]

O.D.[inch]

4 4635-040 80.08 5 1.75 3.18 5.006 4635-060 121.34 5 3.00 5.00 6.75




10.8

Plug, One Piece (MPT)Size[inch]


4 4650-040 65.52 56 4650-060 95.86 5

Adapter Sleeve, One Piece (IPS Spg x S)Size[inch]


4 x 4 4687-040 65.52 106 x 6 4687-060 95.86 10

Containment PPFR Floor Drain, One Piece (IPS Spg xMPT)For use with Fuseal primary piping only.Must use 4635-060 for Contain-It transition.Size[inch]

Part No. USD

3 x 6 46104-530 * 825.064 x 6 46104-532 * 825.06




10.9

Contain-It TerminationsTermination Fitting - Rigid PVC, Split (S to IPS)Size[inch]

Part No. USD C[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 x 1∕2 4628-415 * 134.68 2.00 4.44 5.81 4.69 3.884 x 3∕4 4628-416 * 134.68 2.00 4.44 5.81 4.69 3.884 x 1 4628-417 * 134.68 2.00 4.44 5.81 4.69 3.88

4 x 1 1∕4 4628-418 * 134.68 2.00 4.44 5.81 4.69 3.884 x 1 1∕2 4628-419 134.68 2.00 4.44 5.81 4.69 3.88

4 x 2 4628-420 134.68 2.00 4.44 5.81 4.69 3.886 x 2 1∕2 4628-529 * 194.14 2.75 5.81 8.19 6.88 5.97

6 x 3 4628-530 194.14 2.75 5.81 8.19 6.88 5.976 x 4 4628-532 194.14 2.75 5.81 8.19 6.88 5.97

Test Termination Fitting - Rigid PVC, Split (S to IPS)Size[inch]

Part No. USD C[inch]

L[inch]

W[inch]

O.D.[inch]

I.D.[inch]

4 x 2 4628-420T 140.74 2.00 4.44 5.81 4.69 3.886 x 4 4628-532T 200.20 2.75 5.81 8.19 6.88 5.97

Termination Fitting - Flexible Alcryn, One PieceContain-It to IPS/MetricSize[inch]

Size[mm]

Part No. USD

4 x 1∕2 20 4628-415A 80.084 x 3∕4 25 4628-416A 80.084 x 1 32 4628-417A 80.08

4 x 1 1∕4 40 4628-418A 80.084 x 1 1∕2 50 4628-419A 80.08

4 x 2 63 4628-420A 80.086 x 2 1∕2 75 4628-529A 236.60

6 x 3 90 4628-530A 236.606 x 4 110 4628-532A 236.60




10.10

Test Termination Fitting - Flexible Alcryn, One PieceContain-It to IPS/MetricSize[inch]

Size[mm]

Part No. USD

4 x 1∕2 20 4628-415AT 86.144 x 3∕4 25 4628-416AT 86.144 x 1 32 4628-417AT 86.14

4 x 1 1∕4 40 4628-418AT 86.144 x 1 1∕2 50 4628-419AT 86.14

4 x 2 63 4628-420AT 86.146 x 2 1∕2 75 4628-529AT 242.66

6 x 3 90 4628-530AT 242.666 x 4 110 4628-532AT 242.66

Termination Fitting - Flexible Alcryn, One PieceContain-It to Copper Tube SizeSize[inch]

Part No. USD

4 x 1∕2 4628-415AC 80.084 x 3∕4 4628-416AC 80.084 x 1 4628-417AC 80.08

4 x 1 1∕4 4628-418AC 80.084 x 1 1∕2 4628-419AC 80.08

4 x 2 4628-420AC 80.086 x 2 4628-528AC 212.94

6 x 2 1∕2 4628-529AC 236.606 x 3 4628-530AC 236.606 x 4 4628-532AC 236.60

Test Termination Fitting - Flexible Alcryn, One PieceContain-It to Copper Tube SizeSize[inch]

Part No. USD

4 & 1∕2 4628-415ATC 86.144 & 3∕4 4628-416ATC 86.144 & 1 4628-417ATC 86.14

4 & 1 1∕4 4628-418ATC 86.144 & 1 1∕2 4628-419ATC 86.14

4 & 2 4628-420ATC 86.146 & 2 4628-528ATC 218.40

6 & 2 1∕2 4628-529ATC 242.666 & 3 4628-530ATC 242.666 & 4 4628-532ATC 242.66




10.11

Contain-It CentralizersCentralizer (Contain-It x IPS)Size[inch]

d Part No. USD PackQty

4 x 1∕2 4686-415 * 41.26 254 x 3∕4 4686-416 * 41.26 254 x 1 4686-417 * 18.20 25

4 x 1 1∕4 4686-418 * 41.26 254 x 1 1∕2 4686-419 * 18.20 25

4 x 2 4686-420 * 18.20 256 x 2 1∕2 4686-529 * 55.82 25

6 x 3 4686-530 * 24.26 256 x 4 4686-532 * 24.26 256 x 1∕2 Twin 4686-811 * 134.68 56 x 3∕4 Twin 4686-813 * 134.68 56 x 1 Twin 4686-815 * 134.68 5

Centralizer (Contain-It x Copper Tube Size)Size[inch]


4 x 1∕2 4686-415C * 41.26 104 x 3∕4 4686-416C * 41.26 104 x 1 4686-417C * 41.26 10

4 x 1 1∕4 4686-418C * 41.26 104 x 1 1∕2 4686-419C * 41.26 10

4 x 2 4686-420C * 41.26 106 x 2 4686-528C * 53.67 10

6 x 2 1∕2 4686-529C * 55.82 106 x 3 4686-530C * 55.82 106 x 4 4686-532C * 55.82 10

Centralizer (Contain-It x Metric)Size d Part No. USD Pack

Qty

4 x 20 4686-712 * 41.26 254 x 25 4686-713 * 41.26 254 x 32 4686-714 * 41.26 254 x 40 4686-715 * 41.26 254 x 50 4686-716 * 41.26 25

4 x 63 4686-717 * 41.26 256 x 75 4686-719 * 55.82 256 x 90 4686-720 * 55.82 25

6 x 110 4686-721 * 55.82 256 x 20 Twin 4686-812 * 134.68 56 x 25 Twin 4686-814 * 134.68 56 x 32 Twin 4686-816 * 134.68 5




10.12

Contain-It AccessoriesFitting ClipSize Part No. USD Pack

Qty

4 & 6 4693-101 * 0.55 25

Pipe ClampSize Part No. USD

4 & 6 4693-102 * 491.40

Drill BitsSize Part No. USD

4 4693-104 * 60.666 4693-106 * 121.21

Test Gauge

Size Part No. USD

4 & 6 4693-150 * 62.40

Manual Injection Gun - System IId Part No. USD

4 & 6 4694-200 * 552.06

Pneumatic Injection Gun - System IId Part No. USD

4 & 6 4694-201 * 1516.66

Adhesive Cartridge - System IILimited Shelf Life of 18 Monthsd Part No. USD Pack

Qty

4 & 6 4694-302 * 72.80 12




10.13

Mixing Tips - System IIDescription Part No. USD Pack

Qty

Straight 4694-303 * 6.98 10Bent 4694-307 * 18.80 10

Flexible 4694-306 * 32.76 10


FittingsQuantity of 4” Tees and Wyes _________ x 3 = _________

Quantity of 4” Fittings _________ x 2 = _________(other than tees and wyes)

_________ /14 = __________

Quantity of 6” Tees and Wyes _________ x 3 = _________

Quantity of 6” Fittings _________ x 2 = _________(other than tees and wyes)

_________ /10 = (+) __________

Split Pipe

_______ Feet 4” Split Pipe/20 (1 cartridge will fi ll 20 ft., both sides) = (+) __________

_______ Feet 6” Split Pipe/10 (1 cartridge will fi ll 10 ft., both sides) = (+) __________

TOTAL CARTRIDGES ____________

Adhesive Requirements

Contain-It™ Cartridge Fittings/Pipe # of Sockets/Tube1 cartridge 4” fi ttings 14

1 cartridge 6” fi ttings 10

1 cartridge 4” pipe 20 ft. length, both sides

1 cartridge 6” pipe 10 ft. length, both sides

Adhesive Cartridge Requirements Calculation

This table is designed to assist in the accurate determination of the number of adhesive cartridges

required for a specifi c project.

10.14 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.

· Effective Jan. 1, 2013. See for updated info.

Documents

Transcript of · Effective Jan. 1, 2013. See for updated info.