Катушки для очистки канализаций

FAMILY OWNED AND OPERATED SINCE 1933

Jetting • Rodding • Steam Cleaning

•Video Pipeline Inspection • Residential • Washdown

•Sanitizing • Water Blasting • Vacuuming • Portable Toilet Cleaning

www.hannay.com

Pride in workmanship • Reels built to order • Consistent quality • Service with integrity • Value for your dollar

YouCan’t�BuyA�BetterReel

23440 Hannay Pumper_1603 Hose Reel 2/1/11 2:46 PM

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected]

2. What is the reel for?HOSE (check one): Jetter hose Rodder hose

Live Single hose OtherInside diameter: ______________________________________________Outside diameter: ____________________________________________Bend radius: _________________________________________________Hose length: _________________________________________________Hose weight:_________________________________________________Working pressure: ____________________________________________

Type of product handled (check one):Water (specify type): ____________________________________Other (specify type): _____________________________________

Hose inlet type (check one):90° StraightSteel

Hose outlet type (riser):Thread Size: ______________________________________________Thread (check one):

National Pipe Thread (NPT)British Standard Pipe (BSP)Other

Indicate your specifications_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Hannay Reels Order Worksheet

1. Who’s the reel for?

Company

Division

Contact

Street Address

City State Zip Country( ) / /Telephone Fax Date

3. What features does the reel need?Check type of rewind:

MANUALGear-drive crankChain-drive crank

POWERElectric (voltage: ___________________________________________)Hydraulic

Check type of installation:Floor Wall Vehicle

Accessories (if any):______________________________________________Roller Assemblies: _______________________________________________

Check type of installation and roller position.Roller

TopBottom

4. Please note size and/or weight limitations for your installationLength __________________________________________________________Height__________________________________________________________

Width __________________________________________________________Weight _________________________________________________________

To order Hannay Reels, fill out this simple form (or a photocopy) and mail or fax to your Hannay Reels dealer.

For custom applications not found in our catalogs, call the Inside Sales Group at (518) 797-3791.

DRAGRoller SR

DRAGRoller TR


www.petropump.ru Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп" [email protected]

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] 3

Our Guarantee and Service PolicyEquipment manufactured by Hannay Reels, Inc. is guaranteed for two years from date of shipment when installedaccording to our instructions, given proper care, and used for the purpose for which it is designed.Equipment which proves to be defective upon our inspection will be replaced free of charge, including freight to the cus-tomer. Our responsibility ceases upon delivery to any common carrier and we do not, unless previously instructed, insureshipments beyond point of delivery to such carrier. No material will be accepted for return without a return goods author-ization. No allowance will be made for labor charges incurred in making exchanges, replacements or repairs.Components (including hose and cable) which are manufactured by other vendors will be subject to the warranty termsof their own manufacturers. Also excluded from the general guarantee are normal wear items (including seals, motorbrushes, and paint finish).We reserve the right to modify or alter materials, dimensions, design and construction when necessary to improve theperformance of the reel and/or accessories, or to meet delivery requirements.Failure to use a properly sized circuit breaker with any electric rewind motor will void warrantyon motor.Failure to use a flexible connector with any live hose reel will void warranty on swivel joint.We expressly disclaim any liability for damage or injuries resulting from the use, operation, service, maintenance orfailure of equipment.

Paint NoticeTo meet the requirements and performance of vehicle and OEM apparatus paints we recommend our reels be paintedwith the same or equal paint as used on the specific apparatus the reel is being mounted on.Hannay Reels will supply any model or custom reel or part with an automotive primer or rust preventative oil finishupon request, allowing application of final coating at your facility. Or at additional cost Hannay can prime / pre-paintall material before final assembly.In today's regulatory environment this would be the most cost-effective way to meet your finishing standards.Optional finishes are available for various environmental conditions and should be discussed with the factory.Standard finish is oven cured enamel. High performance finishes for demanding and corrosive environ-ments are available at an additional cost. Consult factory for specific requirements.

Return Goods PolicyAll Hannay Reels are built to order. The parts and components are ordered or placed into production as soon as theorder is written.In order to keep the number of returned goods at a minimum, we ask that you use the Hannay Reels Order Worksheetand/or Accessories Order Form when specifying reels with us. These forms can also be found in our Ordering andAccessory Guide, H-0415-OA. Be sure to include any size and/or weight limitations for your installation.In the event that an item does need to be returned for credit, repair or replacement, prior approval must be obtainedfrom Hannay Reels, Inc. Upon your request, we will fax a Return Goods Authorization form. A signed copy of this formmust accompany the material when returned to us.All material must be returned prepaid, unless otherwise noted on our Return Goods Authorization. No return will beaccepted that has been damaged due to improper return packaging, tampered with or altered from its original condition. Equipment specially built to customer specifications and requirements is not subject tocancellation or returnable for credit under any conditions.Our restocking and handling fee is a MINIMUM of 25% for standard catalog reels and parts.No material will be accepted for credit when returned without permission. Orders for equipment incorporating varia-tions from catalog listed items are special and are not subject to return. No allowance will be made for labor or mileage charges incurred in making exchanges, replacements, or repairs.

Mounting Hole SizesN Series Reels — 7/16" x 7/8" running front to backPressed Frame Reels — 7/16" x 7/8" running left to rightSeries 1500 — 13/32" round holes




SPRING REWIND REELSTo handle 1/4" through 1/2" I.D. hose.• Standard N Series has a narrow frame and compact mounting base.

• Non sparking ratchet assembly.• Declutching arbor to prevent damage from reverse winding.• Standard inlet 90° balanced pressure swivel joint 1/2" female NPT threads.

• Standard outlet 1/2" female NPT threads.• Standard Pressures to 3000 psi (207 bar) (available up to10,000 psi 690 bar).

• Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps.• 4-way roller assembly. • Constant Tension is available – consult factory.

Shown with Optional TR Roller Positionand Hose Package

Notes: A hose stop is necessary on hose to keep spring from unwinding.1. Specifications subject to change.2. Reel models and capacities shown are for standard drag

applications; for vertical lift applications consult factory.3. Other sizes, from standard components, available on request.4. Finish: refer to Page 3.5. Be sure to check dimensions and weights prior to

ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.* Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground).

*** x,y indicate mounting holes.

For Service Trucks:• Air/Water• Steam

• Air Tools• High Pressure

4

Model Hose Capacity of Reel Approx. Weight Standard Reel Dimensions***Number feet lb. Roller inches

m. kg. Assy mm.

I.D. (in) 1/4" 3/8" 1/2" UPSI.D. (mm) 6 10 13 FedEx Frt.O.D. (in) 5/8" 3/4" 7/8" NET SHIP SHIP A B C E F G H XO.D. (mm) 16 19 22 Wt. Wt.

N716-14-16-8C – 25 25 52 64* 87 N204 10 4 8 17.62 11.25 16.25 9.12 8– 8 8 24 29 39 254 102 203 448 286 413 232 203

N716-16-17C – 35 35 55 67* 90 N204 10 4 10.5 18.5 11.25 17 9.12 8– 11 11 25 30 41 254 102 267 470 286 432 232 203

N716-19-20J – 50 50 64 82* 99 N204 10 4 10.5 20.75 11.25 20 10.62 8– 15 15 29 37 45 254 102 267 527 286 508 270 203

N716-23-24-15.5G 100 75 65 94 101* 129 N204 10 4 15.5 23.75 11.25 24 12.62 830 23 20 43 46 59 254 102 394 603 286 610 321 203

N716-23-24-15.5J – 65 65 79 86* 114 N204 10 4 15.5 23.75 11.25 24 12.62 8– 20 20 36 39 52 254 102 394 603 286 610 321 203

N716-25-26-15.5B – 75 75 90 – 125 N204 10 4 15.5 25.25 11.25 26 13.62 8– 23 23 41 – 57 254 102 394 641 286 660 346 203

N718-25-26-15.5G – 100 100 96 – 131 N206 12 6 15.5 25.25 13.25 26 13.62 10– 30 30 44 – 59 305 152 394 641 337 660 346 254

Y10254D12305

E

G

H

C

B

XA

F

S E R I E S

Parts Drawing – ISO 79

SR (STD)Available Roller Positions

VR (OPT) TR (OPT)




MANUAL OR POWER REWIND REELSTo handle single 1/4" through 5/8" I.D. hose.• Lightweight compact reels designed for long lengths of hose in manual and power rewind.

• Direct crank rewind is permanently attached. • Chain and sprocket drive powered by electric, hydraulic, or compressed air motor.

• Manual reels include: cam-lock drag brake, spring actuated pin lock.

• Standard inlet 90° ball bearing swivel joint 1/2" female NPT threads.

• Standard outlet 1/2" female NPT threads.• Optional Rollers: Specify roller position when ordering. • Pressures to 3000 psi (207 bar)• Temperatures from +20° F to +400° F (-7° C to +204° C).• Consult factory for other pressures & temps.

Notes:1. Specifications subject to change.2. Upon request, reels can be supplied with drum lengths other than shown.3. Weights shown in chart are for crank rewind models. ADD these amounts for

power rewind models, does not apply to FedEx or UPS.Net (lbs.)/kg Ship (lbs.)/kg

Electric 18/8.2 18/8.2Hydraulic 15/6.8 15/6.8Air 15/6.8 15/6.8

* Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground).

4. Dimension “F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with:

A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind(Air rewind reels are supplied with control valve and 18" air hose; 12v and 24vDC rewind reels are supplied with switch and solenoid; 115v AC rewind reelsare not supplied with switch but can be ordered separately; hydraulic rewindreels are not supplied with control valve.)

6. Manual rewind available in RT or LB configuations only.7. Finish: refer to Page 3.8. Be sure to check dimensions and weights prior to ordering.9. Some roller options may prohibit the use of our molded chain guard.

For:• High Pressure• Steam Cleaning

• Water• Air

Model Hose Capacity of Reel Approx. Weight Reel Dimensions***Number feet Crank Rewind 3 inches

m. lb. mm.kg.

I.D. (in) 1/4" 3/8" 1/2" 5/8" UPSI.D. (mm) 6 10 13 16 FedEx FreightO.D. (in) 5/8" 3/4" 7/8" 1" NET SHIP SHIP A B E E F F XO.D. (mm) 16 19 22 25 Wt. Wt. CRANK POWER CRANK POWER

1514-17-18 175 125 75 50 27 65* 62 11 6 16.5 19 18.5 16.5 9.553 38 23 15 12 30 28 279 152 419 483 470 419 241

1520-17-18 350 275 175 125 29 80* 64 17 12 16.5 19 24.5 22.5 15.5107 84 53 38 13 36 29 432 305 419 483 622 572 394

1526-17-18 500 400 300 200 31 98* 66 23 18 16.5 19 30.5 28.5 21.5152 122 91 61 14 45 30 584 457 419 483 775 724 546

1530-17-18 – 500 375 275 33 110* 68 27 22 16.5 19 34.5 32.5 25.5– 152 114 84 15 50 31 686 559 419 483 876 826 648

1536-17-18 – – 475 350 35 129* 70 33 28 16.5 19 40.5 38.5 31.5– – 145 107 16 59 32 838 711 419 483 1029 978 800

B

X

A

F

C

G

H

Y

D

E

S E R I E S

For PowerRewind

See Note 5

Parts Drawing – ISO 90 (power); ISO 179 (manual)

Electric RewindStandard Configuration Shown

Optional ExternalMounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

NOTICE: A Flexible Connector must be used between the inlet pipe and theinlet swivel joint.*** x,y indicate mounting holes. See page 3.

Power Rewind Shown




PWK-200Wall mount

PWK-400Wall mount with pivot

PWK-300For Round tubing mount

Model Hose Capacity of Reel Approx. Weight Reel Dimensions***Number feet Crank Rewind inches

m. lb. mm.kg.

I.D. (in) 3/8"I.D. (mm) 10O.D. (in) 3/4" NET SHIP A B C D E F G H X YO.D. (mm) 19

PW-2 150 26 58* 9 6 6 4 16.75 17 18.25 10 5 2.7546 12 26 229 152 152 102 425 432 464 254 127 70

MANUAL REWIND REELTo handle single 3/8" I.D. hose.Lightweight, compact and versatile, the PW Series designedfor mobile and portable pressure wash equipment.• Permanent direct crank rewind.• Adjustable split bearing brake assembly.• Standard inlet full flow swivel joint with 1/2" NPT fitting.• Standard outlet 3/8" female NPT fitting• Other sizes and/or threads can be furnished and must bespecified.

• Pressures up to 4000 psi (276 bar).• Product temperatures from +20°F to +400°F (-7°C to + 204°C).

• Consult factory for other temperatures.• Specify mounting position when ordering mounting kits.• Black powder coat finish.• Optional SS construction & internals – consult factory.

Notes:1. Specifications subject to change.2. Finish: refer to Page 3.3. Be sure to check dimensions and weights prior to

ordering.NOTICE: A Flexible Connector must be used between the inlet pipeand the inlet swivel joint.* When shipped as a parcel package (via FedEx or UPS Ground).

*** x,y indicate mounting holes.

M O D E L


For:• Pressure Washing• Steam Cleaning• Spray Operations• Washdown

B

C

A

F

G

H

E

Y

D

Shown with optional PWK-200 mounting kit

Mounting Kits




PORTABLE HOSE REELS ON WHEELSTo handle 3/8" through 1" I.D. hose.• Continuous flow reels with swivel joint inlet, fluid hub, outlet riser.• Standard with pneumatic tires and cam-lock brake.• Direct crank rewind is permanently attached.• One-piece foot, and removable steel handlebar.• GH Prefix to model # (e.g. GH1100, GHAT1200) includes garden hose thread on outlet, 5' lead-in hose, hose end clips.

• Consult factory for other pressures & temps.• Optional folding handle – for compact storage.

Model AT1100 – Standard inlet 90° ball bearing swivel joint 1/2" female NPT threads.• Standard outlet is 1/2" female NPT threads.• Pressures to 3000 psi (207 bar).• Temperatures from +20° F to +400° F (-7° C to +204° C).

Model AT1200 – Standard inlet 90° balance pressure swivel joint 1" female NPT threads.• Standard outlet is 1" female NPT threads.• Operates at pressures to 1000 psi (69 bar). • Temperatures from -40° F to +250° F (-40° C to +121° C).

S E R I E S

AT1100ConfigurationShown withOptionalFoldingHandle

Notes:1. Specifications subject to change.2. Finish: refer to Page 3.3. Be sure to check dimensions and weights prior to

ordering.* Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground).

Some assembly required.

B

A

F

C G

H

D

E

Model Hose Capacity of Reel Approx. Weight Reel DimensionsNumber feet lb. inches

m. kg. mm.

I.D. (in) 3/8" 1/2" 5/8" 3/4” 1”I.D. (mm) 10 13 16 19 25O.D. (in) 3/4" 7/8" 1" 1-9/32” 1-9/16” NET SHIP A B C D E F G HO.D. (mm) 19 22 25 33 40

AT1100 275 175 125 – – 47 100* 21.5 12 6 22 16.5 24.62 39 13.8184 53 38 – – 21 46 546 305 152 559 419 625 991 351

AT1200 – 350 250 150 100 86 147* 24.88 11.5 8 23 22.75 26.5 40 17.25– 107 76 46 30 39 67 632 292 203 584 578 673 1016 438

AT1100 Shown

GHAT 1200 Configuration Shown

Parts Drawing – AT1100–ISO 48; GHAT1200-ISO 87

For:• Washdown • Grounds Maintenance• Home Use



MANUAL OR POWERREWIND REELSTo handle single 1/2" through 1" I.D. hose.• Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor.

• Crank rewind reels supplied with pinion brake, power rewind reelswith a comet brake.

• Standard inlet a 90° ball bearing swivel joint 1" female NPTthreads.

• Standard outlet 1" female NPT threads.• Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hubassembly and riser, are available.

• Optional Rollers may be purchased.• Pressures to 1000 psi (69 bar).• Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps.• Chainguard available upon request, must be specified.

Electric RewindStandard Configuration Shown


For:• Water Supply• Suction/Transfer

• Spray Operations

8

Optional Auxiliary RewindRing and pinion shaft rewind unit with removable crank handle

Shown with optional Assembly C RollerTop Wind

S E R I E S



Model Hose Capacity of Reel Approx. Weight Reel Dimensions***Number feet Crank Rewind 3 inches

m. lb. mm.kg.

I.D. (in) 1/2" 3/4" 1"I.D. (mm) 13 19 25O.D. (in) 7/8" 1-9/32" 1-9/16" NET SHIP A B D E F F G H X YO.D. (mm) 22 33 40 CRANK POWER

6024-19-21 235 125 60 85 127 21 15.5 20.5 18.75 25.38 28.5 21.5 12.12 13 16.7572 38 18 39 58 533 394 521 476 645 724 546 308 330 425

6032-19-21 350 200 100 102 144 29.5 24 20.5 18.75 33.88 37 21.5 12.12 21.5 16.75107 61 30 46 65 749 610 521 476 861 940 546 308 546 425

6024-23-24 450 185 100 92 134 21 15.5 20.5 22.75 25.38 28.5 23.5 12.12 13 16.75137 56 30 42 61 533 394 521 578 645 724 597 308 330 425

6030-23-24 – 250 150 105 147 27.5 22 20.5 22.75 31.88 35 23.5 12.12 19.5 16.75– 76 46 48 67 699 559 521 578 810 889 597 308 495 425

6038-23-24 – 350 200 120 162 35 29.5 20.5 22.75 39.38 42.5 23.5 12.12 27 16.75– 107 61 54 73 889 749 521 578 1000 1080 597 308 686 425

6016-25-26 285 100 60 88 130 13 7.5 25.5 24.75 17.38 20.5 27.88 15.5 7.75 21.7587 30 18 40 59 330 191 648 629 441 521 708 394 197 552

6022-25-26 500 200 100 100 142 19 13.5 25.5 24.75 23.38 26.5 27.88 15.5 11 21.75152 61 30 45 64 483 343 648 629 594 673 708 394 279 552

6028-25-26 – 300 200 113 155 25.5 20 25.5 24.75 29.88 33 27.88 15.5 17.5 21.75– 91 61 51 70 648 508 648 629 759 838 708 394 445 552

6018-30-31 450 235 135 101 151 15 9.5 25.5 28.75 19.38 22.5 29.88 15.5 7 21.75137 72 41 46 68 381 241 648 730 492 572 759 394 178 552

6024-30-31 – 400 200 113 163 21 15.5 25.5 28.75 25.38 28.5 29.88 15.5 13 21.75– 122 61 51 74 533 394 648 730 645 724 759 394 330 552

6028-30-31 – 500 265 121 171 25.5 20 25.5 28.75 29.88 33 29.88 15.5 17.5 21.75– 152 81 55 78 648 508 648 730 759 838 759 394 445 552

† 6030-30-31 – 550 300 125 175 27.5 22 25.5 28.75 31.88 35 29.88 15.5 19.5 21.75– 168 91 57 79 699 559 648 730 810 889 759 394 495 552

† 6028-33-34 – 600 350 129 179 25 20 31.5 31.75 29.62 32.75 33.62 17.75 17.5 27.75– 183 107 59 81 635 508 800 806 752 832 854 451 445 705


Notes:Specifications subject to change.1. Upon request, reels can be supplied with drum lengths other than shown and

with disc sizes in other diameters.2. Dimensions shown for reels up to and including 30-31 disc size reflect

pressed frames. All others are rollformed channel frames.3. Weights shown in chart are for crank rewind models. ADD these amounts for

power rewind models:Net (lbs.)/kg Ship (lbs.)/kg

Electric 1/2 HP 40/18.1 40/18.1Hydraulic 20/9.1 20/9.1Air 20/9.1 20/9.1

4. When ordering power rewind models, prefix model number with:A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind(Air rewind reels are supplied with control valve and 18" air hose; 12v and24v DC rewind reels are supplied with switch and solenoid; 115v AC rewindreels are not supplied with switch but can be ordered separately; hydraulicrewind reels are not supplied with control valve.)

5. Finish: refer to Page 3.6. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and the inletswivel joint.*** x,y indicate mounting holes. See page 3† Some applications require a clutch/reduction unit.

9

S E R I E S

For PowerRewind

See Note 4

Power Rewind Shown

C10.5267

B

XAF

Y

D

H

G

E





Shown with optional Assembly C RollersOptional Auxiliary Rewind and Hose

S E R I E S

POWER REWIND REELSTo handle single 3/8" through 1/2" I.D. hose.• Rugged construction.• Strong spool to control hose expansion.• Inlet - 1/2" Female NPT - 90˚ Ball Bearing swivel joint.• Outlet - 1/2" Female NPT threads.• #35 Chain & Sprocket Drive is standard, #40 Chain is optional.

• Hydraulic, Air and Electric motorized rewind.• Steel-Hub Assembly - rated to 5000 psi.

Options• Auxiliary Rewind.• Roller assemblies.• Chainguard• Hose Packages

For:• Jetting• Water Blasting

• Sewer Cleaning

Remember Hannay Reels Added Values• Discs are heavy gauge with rolled edges to offer maximum strength.• Frames are of a superior design.• Bearings on each side of spool offer superior wear life and ease of any future maintenance.• Swivel joints allow for ease of future repair/replacement. Seal design well proven in the industry. Pressure ratings to10,000 psi are available.




Model Hose Capacity of Reel Approx. Weight Reel Dimensions***Number feet lb. inches

m. kg mm.

I.D. (in) 3/8" 1/2"I.D. (mm) 10 13

O.D. (in) .68" .89" NET SHIP A B C D E F G H X YO.D. (mm) 17.3 22.6

6118-23-24 400 200 170 205 15.5 9.5 10.5 23.25 22.75 22.25 24 12.63 8.5 20.25122 61 77 93 394 241 267 591 578 565 610 321 216 514

6122-23-24 600 300 175 210 19.5 13.5 10.5 23.25 22.75 26.25 24 12.63 12.5 20.25183 91 79 95 495 343 267 591 578 667 610 321 318 514

6116-25-26 400 200 171 206 13.5 7.5 10.5 25.25 24.75 20.25 26 13.63 6.5 22.25122 61 78 93 343 191 267 641 629 514 660 346 165 565

6118-25-26 475 300 176 211 15.5 9.5 10.5 25.25 24.75 22.25 26 13.63 8.5 22.25145 91 80 96 394 241 267 641 629 565 660 346 216 565

6122-25-26 700 450 187 222 19.5 13.5 10.5 25.25 24.75 26.25 26 13.63 12.5 22.25213 137 85 101 495 343 267 641 629 667 660 346 318 565

6116-30-31 600 300 200 250 13.5 7.5 10.5 29.25 28.75 20.25 31 16.63 6.5 26.25183 91 91 113 343 191 267 743 730 514 787 422 165 667

6118-30-31 675 400 205 255 15.5 9.5 10.5 29.25 28.75 22.25 31 16.63 8.5 26.25206 122 93 116 394 241 267 743 730 565 787 422 216 667


with disc sizes in other diameters.2. When ordering power rewind models, prefix model number with:

A = Air Rewind EP = Electric Rewind (2/3 hp) HD = Hydraulic Rewind(Air rewind reels are supplied with control valve and 18" air hose; 12v and24v DC rewind reels are supplied with switch and solenoid; 115v AC rewindreels are not supplied with switch but can be ordered separately; hydraulicrewind reels are not supplied with control valve.)

3. Finish: refer to Page 3.4. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and the inletswivel joint.*** x,y indicate mounting holes.

S E R I E S

For PowerRewind

See Note 2

Power Rewind Shown

B

XA

F

CG

H

YD

E



POWER REWIND REELSTo handle single 3/4" through 1" I.D. hose.• Heavy-duty construction.• Strong spool and frame to control hose expansion. • Inlet – 1" FNPT 90° ball bearing swivel joint.• Outlet 1" female NPT threads.• Hydraulic motor rewind.• #50 chain and sprocket drive.• Steel hub assembly – rated to 3000 psi (207 bar).• Assembly “A” roller on front of frame. • Full chainguard.

Options• 5000 psi working pressure.• Roller assemblies.• Direct drive hydraulic motor rewind (see page 14).• Hose Packages.

Standard Configuration Shown


For:• Rodding• Water Blasting• Sewer Cleaning

12

S E R I E S

Remember Hannay Reels Added Values• Discs are heavy gauge with rolled edges to offer maximum strength.• Frames are of a superior design.• Bearings on each side of spool offer superior wear life and ease of any future maintenance.• Swivel joints allow for ease of future repair/replacement. Seal design well proven in the industry. Pressure ratings to10,000 psi are available.



Model Hose Capacity of Reel Approx. Weight Reel Dimensions***Number feet lb. inches

m. kg mm.

I.D. (in) 3/4" 1"I.D. (mm) 19 25O.D. (in) 1.18" 1.43" NET SHIP A B C D E F G H X YO.D. (mm) 29.9 36.3

6218-33-34-16 225 150 367 418 19 9.5 16 32.25 34.25 24 34 18.13 12 29.2569 46 166 190 483 241 406 819 870 610 864 461 305 749

6222-33-34-16 300 200 392 446 23 13.5 16 32.25 34.25 28 34 18.13 16 29.2591 61 178 202 584 343 406 819 870 711 864 461 406 749

6224-33-34-16 375 225 405 455 25 15.5 16 32.25 34.25 30 34 18.13 18 29.25114 69 184 206 635 394 406 819 870 762 864 461 457 749

6218-39-40-16 350 250 454 524 19 9.5 16 39.5 41.5 25 40 20.5 12 36.5107 76 206 238 483 241 406 1003 1054 635 1016 521 305 927

6220-39-40-16 400 300 466 536 21 11.5 16 39.5 41.5 27 40 20.5 14 36.5122 91 211 243 533 292 406 1003 1054 686 1016 521 356 927

6222-39-40-16 500 350 480 555 23 13.5 16 39.5 41.5 29 40 20.5 16 36.5152 107 218 252 584 343 406 1003 1054 737 1016 521 406 927

6224-39-40-16 600 400 492 577 25 15.5 16 39.5 41.5 31 40 20.5 18 36.5183 122 223 263 635 394 406 1003 1054 787 1016 521 457 927

6220-45-46-16 – 300 543 628 21 11.5 16 45.5 47.5 27 46 23.5 14 42.5 – 91 246 285 533 292 406 1156 1207 686 1168 597 356 1080

6224-45-46-16 900 500 570 655 25 15.5 16 45.5 47.5 31 46 23.5 18 42.5274 152 259 297 635 394 406 1156 1207 787 1168 597 457 1080



with disc sizes in other diameters.2. When ordering power rewind models, prefix model number with

HD=Hydraulic Rewind. Hydraulic rewind reels are not supplied with controlvalve.

3. Finish: refer to Page 3.4. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and the inletswivel joint.*** x,y indicate mounting holes.

13

S E R I E S

For PowerRewind

See Note 2

Power Rewind Shown

B

XA

F

CG

H

YD

E





with disc sizes in other diameters.2. When ordering power rewind models, prefix model number with

HDD=Hydraulic Direct Drive. Hydraulic rewind reels are not supplied withcontrol valve.

3. Finish: refer to Page 3.4. Be sure to check dimensions and weights prior to ordering.NOTICE: A Flexible Connector must be used between the inlet pipe and the inletswivel joint.

S E R I E S

For PowerRewind

See Note 2

Standard Configuration Shown

DIRECT DRIVEWith heavy-duty swivel base option to handle single 3/4" through 1" I.D. hose.This reel is designed with external hose connection to allowtightening of hose connection without removing all hose fromthe spool. The hose guide arm along with the optional swivelbase allow precise payout of hose from the reel.• Direct drive hydraulic motor (no chain & sprocket maintenance)

• 1" swivel joint with adjustable packing• Heavy-duty spool and frame design• Swinging guide arm with roller & operator handle

• Rotating ball bearing swivel base• Heavy-duty pinlock in base for locking in multiple locations

• Other models and capacities are available upon request

Model Cable Capacity of Reel Approx. Weight Reel DimensionsNumber feet lb. inches

m. kg. mm.

I.D. (in) 3/4" 1"I.D. (mm) 19 25O.D. (in) 1.18" 1.43" NET SHIP A B C D E F G HO.D. (mm) 29.9 36.3

6222-39-40-16 500 350 480 555 23 13.5 16 20 47.6 38.5 26 45.5152 107 218 252 584 343 406 508 1209 978 660 1156

6224-39-40-16 600 400 492 577 25 15.5 16 20 47.6 40.5 26 45.5183 122 223 263 635 394 406 508 1209 1029 660 1156

6220-45-46-16 500 300 543 628 21 11.5 16 20 50.6 36.5 29 51.5152 91 246 285 533 292 406 508 1285 927 737 1308

6224-45-46-16 900 500 570 655 25 15.5 16 20 50.6 40.5 29 51.5274 152 259 297 635 394 406 508 1285 1029 737 1308

AF

D

E

G

H

B

C




S E R I E S

MANUAL AND POWER REWIND REELS To handle live electric cable.• Gear-driven crank rewind.• Chain and sprocket drive powered by electric, compressed air, or hydraulic motor.

• Auxiliary rewind and pinion brake standard.• Consult factory for other brakes.• 3-conductor 45 amp 600 volt collector assembly with #8 gauge wiring.

• Double brushes per circuit. Brushes are copper graphite, copper alloy rings.

• Additional con ductors or higher amperage (up to 100 amps) are available at extra cost, must be specified. (300 amps possible with custom design).

• Silver collector assemblies are available.• Rollers and roller mounting brackets are accessory items. Specify roller position.

Series CR6600 (Power Rewind)Standard Configuration Shown

Notes:1. Specifications subject to change.2. Upon request, reels can be supplied with drum lengths other than shown and

with disc sizes in other diameters.3. Dimensions reflect pressed frames.4. Weights shown in chart are for crank rewind models. Add these amounts for

power rewind models.Series CR6600 Net (lbs.)/kg Ship (lbs.)/kgElectric 40/18.1 40/18.1Hydraulic 20/9.1 20/9.1Air 20/9.1 20/9.1

5. When ordering power rewind models, prefix model number with:A = Air Rewind EP= Electric Rewind (Series CR6600) HD = Hydraulic Rewind(Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.)

6. Be sure to check dimensions and weights prior to ordering.***x,y indicate mounting holes

Model Cable Capacity of Reel Approx. Weight Reel Dimensions***Number feet Crank Rewind inches

m. lb. mm.kg.

GA./NO. OF CONDUCTORS14/3 12/3 10/3 8/3 12/4 10/4

O.D. (in) .530 .600 .690 .750 .670 .750 NET SHIP A B C D E E F F G H X YO.D. (mm) 14 15 18 19 17 19 CRANK PWR. CRANK PWR.

CR6614-19-20 200 150 100 – – – 113 148 11 5.5 10.5 20.5 22 22 16 17.75 21.5 12.12 5.75 16.7561 46 30 – – – 51 67 279 140 267 521 559 559 406 451 546 308 146 425

CR6614-23-24 – 300 225 175 – – 120 155 11 5.5 10.5 20.5 23 23 16 17.75 23.5 12.12 5.75 16.75– 91 69 53 – – 54 70 279 140 267 521 584 584 406 451 597 308 146 425

CR6614-25-26 – 350 250 200 – – 133 168 11 5.5 10.5 25.5 24.75 24.75 16 17.75 27.88 15.5 5.75 21.75– 107 76 61 – – 60 76 279 140 267 648 629 629 406 451 708 394 146 552

For PowerRewind

See Note 5

Parts Drawing: Series CR6600 – ISO 45

Series CR6600 (Power Rewind)

6.5165

C

XA

F

B

G

H

E

YD




M O D E L

PORTABLE HOSE REEL FORPIPE/DRAIN CLEANINGFor residential & light commercial use.• 3,000 PSI Rating.• Tension Brake.• Velcro hose strap.• All Steel Construction.• Quality Swivel Joint.• Manual rewind.• Capacity: 200' of 1/4" I.D. Hose.• Weight: 18 lbs. without hose.• Dimensions: Height: 18.75"Width: 12.50" Depth: 14.75"




S E R I E S

Model Cable Capacity of Reel Approx. Weight Reel DimensionsNumber feet lb. inches

m. kg. mm.

GA./NO. OF CONDUCTORS14/3 12/3 10/3

O.D. (in) .53 .60 .69 NET SHIP A B C D E F G HO.D. (mm) 14 15 18

AT1300 500 400 300 70 102 24.75 12 6 23.5 16.5 31.75 42.5 14.31152 122 91 32 46 629 305 152 597 419 806 1080 363

Notes:1. Specifications subject to change.2. Be sure to check dimensions and weights prior to ordering.


Model AT1300

Model AT1300

For:• Video PipelineInspection

PORTABLE CABLE REEL ONWHEELS• Direct crank rewind reel.• Adjustable Cam-lock drag brake.• 3 conductor 45 amp collector ring is standard.• 6-foot power source lead of 10/3 cable.• 15 amp 3-prong straight blade (twist lock optional).• Additional conductors available, consult factory.• Direct offset rewind crank.• Folding handle available for compact storage.

A

C

F

B

H

G

D

E

Reel with Folding Handle




O P T I O N A L A C C E S S O R I E S

view from back of HG-15

1500 Seriesshown

Stainless steel rollers and cast alloy brackets for use on thereel, on cabinet door openings, truck platforms and similarlocations where sharp edges may cut or damagehose/cable.Specifications: 1-1/2" diameter stainless steel roller,stainless steel rod, Delrin bearings, alloy brackets andrequired fasteners.To Order: Specify Assembly A, B, or C, and give distance between each pair of mounting holes(Dimensions X and Y) and length of each roller(Dimensions W and Z). W=Vert. Roller Length, Z=Horiz. Roller Length.

Also available factory-installed on the reel.

Utility Hose Rollers

1.38

0.88

C2Shown

ASSEMBLY A/A2 B/B2 C/C2

C

1.38

1.88

C2

CShown

HOSE GUIDE FOR MODEL 1500 REELSA clean and efficient way to rewind hose for frequentand repetitive use applications.• Simple design to rewind hose evenly and neatly every time• No need to handle dirty or contaminated hose• Powder-Coated bracket, stainless steel guide rods and nylonrollers assure long service life

• Designed for aftermarket installationHose Guide Kit – HGK-15 Part No. 9956.2200• Kit includes HG-15 Hose Guide, handle grip, 2 stainless steelguide rods, 4 mounting blocks, steel mounting bracket set, andall mounting hardware.

Hose Guide – HG-15 Part No. 9956.2000• Assembled black powder-coated Hose Guide and handle grip.• You must specify reel model when ordering.

Hose StopsNecessary with spring rewindreels and 4-way roller assemblies.Specify the outside diameter (OD) of your hose.

HS-35

WZ

X

YZ

X

Y W

X

Z




• Superior Design• Finest Craftsmanship• Best Delivery• Supreme Value• Premium Materials• Optimum Performance• Quality Brand Products• Maximum ROI

HANNAY REELS CUSTOM DEPARTMENTA complete separate custom facility on premises, devoted to the custom fabrication of reels for specific applications.Working closely with you, the Hannay team of engineers provides hands-on structural design capabilities and detailed planning using sophisticated CAD technology. You also benefit from the efficiency, productivity, and responsiveness of our state-of-the-art manufacturing and shipping facilities.



WSP 2M 01-11 Form H-0804-PCRev 1

553 State Route 143 • Westerlo, New York 12193Toll Free Phone: 1-877-GO-REELS • Toll Free Fax: 1-800-REELING

Email: [email protected]. Phone: 1-518-797-3791 • Intl. Fax: 1-518-797-3259

www.hannay.com

Family owned and operated since 1933, Hannay Reels is the world leader in both OEM and aftermarket applications. Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications – built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer or online at www.hannay.com.

Ordering & Hose Reels Cable Reels Pressure Wash Accessory Guide and Spray Reels

You can trust The Reel Leader ©

for reels you can depend on.• Patented designs for industrial use• Quality, heavy-duty materials throughout• Built by Craftsmen to meet your needs• Custom and one-of-a-kind applications• Little or no maintenance needed• Long lasting value and dependability


Russia, Moscow, Novaya Basmannaya, 23, str. 1A Tel.: +7(499) 277-15-16

+7(495) 661-94-24E-mail: [email protected] Web: www.petropump.ru

Катушки для очистки канализаций

Documents

Transcript of Катушки для очистки канализаций