cspower.com.my€¦ · 263 1 100 Ø 76 34 30 2930 CP/CT/CS 264 1 100 Ø 76 34 30 2930 CP/CT/CS 265...

1

��

2

CONTENTS

A guide to performance data 3

B-PUMPS 4

C-PUMPSSmall and medium size 9

C- AND R-PUMPSLarge size 23

D-PUMPS 29

F-PUMPS 41

H-PUMPS3000-series 45

H-PUMPS5500-series 48

L-PUMPS 54

M-PUMPS 62

MIXERS 67

N-PUMPS 70

PROPELLER PUMPS4600-series 82

PROPELLER PUMPS7000-series 86

B-PUMPSIn bronze and stainless steel 93

C-PUMPSIn stainless steel 94

D-PUMPSIn bronze and stainless steel 99

EXPLOSION PROOFPUMPS AND MIXERS 102

DIMENSIONS 102

3

THIS IS WHAT OUR CURVES, TABLESAND CHARTS SHOW YOU.

B pumpsThe curves are the specified performance for theimpeller selected.

The values shown are for a BS 2125 pump.Impeller characteristics are coded as follows:

LT=Low head. MT=Medium head. HT=High head.SH=Super High head.

=optimal duty point.Technical data MT HT

Impeller code 231 233Phase 3~ 3~Speed of rotation 2875 rpm 2875 rpmOutput power 8 kW 8 kWInput power 9.5 kW 9.5 kWWeight 77 kg 80 kg

C, D, F, L, M, N and H pumpsThe upper diagram shows the shaft power for thecorresponding pump.

The lower diagram shows the performance datafor each pump in terms of pressure (m) and flowrate (l/s).

Further data for each impeller is also shown in thetable format.

=optimal duty point.

P1=motor input powerP2=shaft power

Impeller No. of Outlet Through- Motor rpm Availablecode vanes dia. mm let, mm rating kW versions

CP-vers P1

P2

263 1 100 Ø 76 34 30 2930 CP/CT/CS264 1 100 Ø 76 34 30 2930 CP/CT/CS265 1 100 Ø 76 34 30 2930 CP/CT/CS

Large C pumps, P, PP and L pumpsThis chart and table provides performance data forimpellers used in a large C 3356 pump.

Each different impeller is coded for easyidentification.

Impellers can be machined to achieve any dutypoint required within a field.

Impeller No. of Outlet Through- Motor rpm Availablecode vanes dia. mm let, mm rating kW versions

CP-vers P1 P2

610 3 350 Ø 102 82-150 75-140 990 CP/CT810 3 350 Ø 102 61 55 735 CP/CT

Q (l/s)

H (m)

0 10 20 30 40 500

10

20

30

40

50

60

70

231233

HT

MT

0 100 200 300 400 500 600 7000

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

610

810

4

B-PUMPS • 50 HZ

The B-pump has a multi-vaned, open or semi-open channel impeller available in differentmaterials. It is specificallydesigned to handlemedia containinghighly abrasivematerial, such asclay, sand,drilling mud, etc.

5 10 50 100

5

10

50

100

20522060

2066

20662071

2071

2075

2075

2075

2084

2084

2084

2102

2102

2125

2125

2125

2135

2140

2151

2201

2201

2250

2201

2250

2250

2400

2400

3067 3067

3080

3080

200

200 30020 30 40 60 70 80 90

2

3

4

6

7

8

9

20

30

40

60

70

80

90

5

BIBO 2052

Technical data MT MT MT

IMPELLER CODE 231 232 234PHASE 3~ 1~, 3~ 1~, 3~SPEED OF ROTATION 2700 rpm 2700 rpm 2700 rpmOUTPUT POWER 1.0 kW 0.75 kW, 1.0 kW 0.75 kW, 1.0 kWINPUT POWER 1.4 kW 1 kW, 1.4 kW 1 kW, 1.4 kWWEIGHT 18 kg 18 kg 18 kg

Poly-Life® version available

Technical data MT HT HT

IMPELLER CODE 231, 232 233, 234 234–PHASE 3~ 3~ 1~SPEED OF ROTATION 2800 rpm 2800 rpm 2900 rpmOUTPUT POWER 2.2 kW 2.2 kW 1.5 kWINPUT POWER 2.8 kW 2.8 kW 1.9 kWWEIGHT 30 kg 30 kg 30 kg


BIBO 2066

Technical data MT LT

IMPELLER CODE 231 211PHASE 3~ 3~SPEED OF ROTATION 2800 rpm 2800 rpmOUTPUT POWER 3 kW 3 kWINPUT POWER 3.9 kW 3.9 kWWEIGHT 31 kg 28 kg


BIBO 2071

BIBO 2075

Technical data MT HT ST

IMPELLER CODE 231 233 271PHASE 3~ 3~ 3~SPEED OF ROTATION 2800 rpm 2800 rpm 2800 rpmOUTPUT POWER 3.7 kW 3.7 kW 5.5 kWINPUT POWER 4.6 kW 4.6 kW 7.3 kWWEIGHT 73 kg1) 73 kg1) 90 kg1)

40 kg2) 40 kg2) 64 kg2)

1) Model 324 in cast iron 2) Model 334 in hydronalium Poly-Life® version available

BIBO 2084

Technical data MT HT LT

IMPELLER CODE 230 250 210PHASE 3~ 3~ 3~SPEED OF ROTATION 2880 rpm 2870 rpm 2850 rpmOUTPUT POWER 7.5 kW 14 kW 3.7 kWINPUT POWER 8.9 kW 16.4 kW 4.5 kWWEIGHT 75 kg 110 kg 55 kg

Technical data MT HT

IMPELLER CODE 231 232PHASE 3 3SPEED OF ROTATION 2800 rpm 2800 rpmOUTPUT POWER 2.2 kW 2.2 kWINPUT POWER 2.8 kW 2.8 kWWEIGHT 32 kg 32 kg

BIBO 2060

Head [m]

0 1 2 3 4 5 6 7 8 90

2

4

6

8

10

12

14

234

232 231

Capacity [l/s]

16

Head [m]

0 2 4 6 8 10 12 14 160

4

8

12

16

20

232231

Capacity [l/s]

Head [m]

0 2 4 6 8 10 12 14 160

5

10

15

20

25

30

35

211231

Capacity [l/s]

Head [m]

0 4 8 12 16 200

10

20

30

40

50

60

70

233231

271

Capacity [l/s]

Head [m]

0 2 4 6 8 10 120

20

40

60

80

100

250

210230

Capacity [l/s]

Head [m]

0 2 4 6 8 10 12 140

4

8

12

16

20

234, 1~

234, 3~233 232

231

Capacity [l/s]

6

Technical data HT

IMPELLER CODE 260PHASE 3~SPEED OF ROTATION 2920 rpmOUTPUT POWER 13.5 kWINPUT POWER 15.4 kWWEIGHT 250 kg


BIBO 2102

BIBO 2125

BIBO 2135

Technical data MT MT HT HT

IMPELLER CODE 242 231 234 233PHASE 3~ 3~ 3~ 3~SPEED OF ROTATION 2850 rpm 2850 rpm 2850 rpm 2850 rpmOUTPUT POWER 3.7 kW 5.2 kW 3.7 kW 5.2 kWINPUT POWER 4.5 kW 6.3 kW 4.5kW 6.3 kWWEIGHT 48 kg 48 kg 48 kg 48 kg


Technical data MT HT SH

IMPELLER CODE 231/232 233/234 253PHASE 3~ 3~ 3~SPEED OF ROTATION 2875 rpm 2875 rpm 2915 rpmOUTPUT POWER 8 kW 8 kW 9.7 kWINPUT POWER 9.5 kW 9.5 kW 11.1 kWWEIGHT 77 kg 80 kg 164 kg


Technical data MT

IMPELLER CODE 231 / 232PHASE 3~SPEED OF ROTATION 2875 rpmOUTPUT POWER 12.0 kWINPUT POWER 13.0 kWWEIGHT 82 kg


BIBO 2140

BIBO 2151


IMPELLER CODE 241 233 231/232PHASE 3~ 3~ 3~SPEED OF ROTATION 2900 rpm 2900 rpm 2900 rpmOUTPUT POWER 20 kW 20 kW 20 kWINPUT POWER 23 kW 23 kW 23 kWWEIGHT 165 kg 165 kg 165 kg


BIBO 2201


IMPELLER CODE 231/232 243/244 411/412PHASE 3~ 3~ 3~SPEED OF ROTATION 2940 rpm 2940 rpm 1465 rpmOUTPUT POWER 37 kW 37 kW 30 kWINPUT POWER 41 kW 41 kW 33 kWWEIGHT 445 kg 350 kg 285 kg


Head [m]

0 5 10 15 20 25 30 350

5

10

15

20

25

30

35

40

233

234

242

231

Capacity [l/s]

Head [m]

0 1 2 3 4 5 6 7 80

20

40

60

80

100

261

260

Capacity [l/s]

Head [m]

0 10 20 30 40 50 600

5

10

15

20

25

30

35

232231

Capacity [l/s]

Head [m]

0 10 20 30 40 50 60 70 80 900

10

20

30

40

50

60

70

233 232231

241

Capacity [l/s]

Head [m]

0 40 80 120 160 2000

10

20

30

40

50

60

70

80

90

243

244412

411232231

Capacity [l/s]

Head [m]

0 10 20 30 40 500

10

20

30

40

50

60

70

80

234233

232231

253

Capacity [l/s]60

7

BIBO 2250

BIBO 2400


IMPELLER CODE 431/432 433/434PHASE 3~ 3~SPEED OF ROTATION 1475 rpm 1475 rpmOUTPUT POWER 54 kW 54 kWINPUT POWER 59 kW 59 kWWEIGHT 540 kg 540 kg



IMPELLER CODE 231/232 243/244PHASE 3~ 3~SPEED OF ROTATION 2970 rpm 2970 rpmOUTPUT POWER 90 kW 90 kWINPUT POWER 97 kW 97 kWWEIGHT 900 kg 985 kg


Impeller No. of Outlet dia Through- Motor rpm Availablecode vanes mm CP vers. let, mm rating kW versions253 3 38 10 0.9* 2815 BP/BS251 3 38 10 1.2* 2815 BP/BS231 6 38 10 1.2* 2815 BP/BS

* Single phaseWeight, kg BP BS

HT / MT 34 34

BIBO 3067Head [m]

0 50 100 150 200 2500

10

20

30

40

50

434

433

432

431

Capacity [l/s]

Head [m]

0 20 40 60 80 100 120 1400

40

80

120

160

200

243

244232

231

Capacity [l/s]

Head [m]

0 2 4 6 8 100

2

4

6

8

10

12

14

16

18

253251

231

Capacity [l/s]

BIBO 3060


IMPELLER CODE 221, 222, 226 250, 252PHASE 3~ 3~SPEED OF ROTATION 2800 rpm 2800 rpmOUTPUT POWER 2.4 kW 2.4 kWINPUT POWER 3.3 kW 2.3 kWWEIGHT 41 kg 41 kg


Head [m]

0 2 4 6 8 10 12 14 160

5

10

15

20

25

30

35

40

252

250

226

221222

Capacity [l/s]

BIBO 3080

Technical data MT HT ST

IMPELLER CODE 431 234 263PHASE 3~ 3~ 3~SPEED OF ROTATION 1400 rpm 2800 rpm 2800 rpmOUTPUT POWER 4.0 kW 5.5 kW 5.5 kWINPUT POWER 5.0 kW 7.3 kW 7.3 kWWEIGHT 61 kg1) 61 kg1) 105 kg3)

100 kg2) 100 kg2)

1) Aluminium 2) Cast iron 3) Alum-bronze

Head [m]

0 5 10 15 20 250

5

10

15

20

25

30

35

234

431

263

Capacity [l/s]

8

READY 8

READY 16READY 4

Technical data MT

IMPELLER CODE 200PHASE 1~SPEED OF ROTATION 2700 rpmOUTPUT POWER 0.4 kWINPUT POWER 0.56 kWWEIGHT 9 kgOUTLET DIAMETER mm ∅ 50

READY 12

READY 24

Technical data MT

IMPELLER CODE 200PHASE 1~SPEED OF ROTATION 2800 rpmOUTPUT POWER 0.75 kWINPUT POWER 1.0 kWWEIGHT 11.5 kgOUTLET DIAMETER mm ∅ 50

Technical data MT

IMPELLER CODE 231PHASE 3~SPEED OF ROTATION 2650 rpmOUTPUT POWER 1.0 kWINPUT POWER 1.4 kWWEIGHT 18 kgOUTLET DIAMETER mm ∅ 50

Technical data MT MT

IMPELLER CODE 231 235PHASE 3~ 1~SPEED OF ROTATION 2800 rpm 2750 rpmOUTPUT POWER 1.7 kW 1.5 kWINPUT POWER 2.3 kW 2.0 kWWEIGHT 18 kg 19 kgOUTLET DIAMETER mm ∅ 50 ∅ 75

Technical data MT

IMPELLER CODE 231PHASE 3~SPEED OF ROTATION 2700 rpmOUTPUT POWER 2.4 kWINPUT POWER 3.2 kWWEIGHT 19kgOUTLET DIAMETER mm ∅ 50/∅ 75

READY 40

Technical data MT

IMPELLER CODE 242PHASE 3~SPEED OF ROTATION 2800 rpmOUTPUT POWER 3.7 kWINPUT POWER 3.2 kWWEIGHT 19 kgOUTLET DIAMETER mm ∅ 75/∅ 100

Head [m]

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.00

2

4

6

8

10

200

Capacity [ls]

4.5

Head [m]

0 1 2 3 4 50

2

4

6

8

10

12

14

200

Capacity [l/s]

Head [m]

0 1 2 3 4 5 6 70

2

4

6

8

10

12

231

Capacity [l/s]

Head [m]

0 1 2 3 4 5 6 7 80

4

8

12

16

20

235

231

Capacity [l/s]

1~

3~

Head [m]

0 2 4 6 8 100

4

8

12

16

20

231

Capacity [l/s]

Head [m]

0 5 10 15 20 250

2

4

6

8

10

12

14

16

242

Capacity [l/s]

9

C-PUMPS • 50 HZSMALL AND MEDIUM SIZE

The conventional single-channel impeller is ashrouded channel impeller running in a volute. The

shape and size ofthe channel minimizeclogging, and therefore

makes thepump idealfor waste water, con-

taining large solidparticles. See alsochapter N-pumps.

1 2 5 10 20 50 100 200 500 Q l/s1

2

5

10

20

50

H m100

3067

3085

3102

3085

3140

33003152

3127 3170

3201

3057

3045

10

C 3045 CP/CF/CH/CS

Impeller No. of Outlet dia Through- Motor rpm Availablecode vanes mm CP vers. let, mm rating kW versions

P1 P2

250* 1 50 46 1.5 1.2 2790 CP/CF/CH/CS252* 1 50 46 1.5 1.2 2790 CP/CF/CH/CS252* 1 50 46 1.0 0.8 2870 CP/CF/CH/CS

Pump type CP CF CH CSWeight kg 28 28 28 28

CP/CF/CH/CS


P1 P2

252** 1 50 46 1.0 0.75 2740 CP/CF/CH/CS

* Single phase

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 100

2

4

6

8

10

12

14

16

0.6

0.8

1.0

1.2

1.4

HT

250

250

252

252

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 7 8 90

2

4

6

8

10

0.5

0.6

0.7

0.8

HT

252

252

11

C 3057 CP/CF/CS

Weight kg CP CF CSHT 34 34 34


P1 P2

W250** 1 50 48 3.1 2.4 2695 CP/CF/CS250** 1 50 48 2.3 1.7 2695 CP/CF/CS

W252** 1 50 48 3.1 2.4 2695 CP/CF/CS252* 1 50 48 2.3 1.7 2695 CP/CF/CS252* 1 50 48 2.1 1.5 2695 CP/CF/CS

W254** 1 50 48 3.1 2.4 2695 CP/CF/CS254* 1 50 48 2.3 1.7 2695 CP/CF/CS254* 1 50 48 2.1 1.5 2695 CP/CF/CS

C 3067 CP/CF/CH/CS

Weight kg CP CF CH CSHT 39 40 39 49


P1 P2

W261** 1 50 34 1.6 1.2 2820 CP/CF/CH/CSW263** 1 50 34 1.6 1.2 2820 CP/CF/CH/CSW265** 1 50 34 1.6 1.2 2820 CP/CF/CH/CSW267** 1 50 34 1.6 1.2 2820 CP/CF/CH/CS263** 1 50 34 1.5 1.0 2835 CP/CF/CH/CS

* Single phaseW=Also available in a warm liquid version

** NEVACLOG** Single phase

H [m]

2P [kW]

0 2 4 6 8 10 12 140

4

8

12

16

20

1.5

2.0

2.5

HT

250

250

252

252

254

254

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 100

2

4

6

8

10

12

14

16

18

0.6

0.8

1.0

1.2

1.4

HT

261

261

263

263

265

265

267

267

12

C 3085 CP/CS/CT/CZ


P1 P2

W• 412 1 100 ∅ 100 2.7 2.0 1395 CP/CSW• 414 1 100 80 x 100 2.7 2.0 1395 CP/CSW• 414 1 100 80 x 100 1.8 1.3 1385 CP/CS• 414 1 100 80 x 100 1.8 1.4 1430 CT/CZ• 612 1 100 ∅ 100 1.3 0.9 940 CP/CS• 614 1 100 80 x 100 1.3 0.9 940 CP/CS• 620 1 100 ∅ 100 1.3 0.9 940 CP/CS• 621 1 100 ∅ 100 1.3 0.9 940 CP/CS• 622 1 100 ∅ 100 1.3 0.9 940 CP/CS

• Can be equipped with flush valve

CP/CS


P1 P2

• 250 1 80 40 x 40 3.0 2.4 2830 CP/CS• 252 1 80 40 x 40 3.0 2.4 2830 CP/CS


Weight, kg CP CF CS CT/CZ

LT 78 – 73 –MT 66 68 71 88HT 62 – 63 –CP/CF/CS/CT/CZ


P1 P2

W• 432 * 1 80 ∅ 76 2.7 2.0 1395 CP/CS/CFW• 434 * 1 80 ∅ 76 2.7 2.0 1395 CP/CS/CFW• 434 * 1 80 ∅ 76 1.8 1.3 1385 CP/CS/CF• 434 * 1 80 ∅ 76 1.8 1.4 1430 CT/CZ

W• 436 * 1 80 ∅ 76 2.7 2.0 1395 CP/CS/CFW• 436 * 1 80 ∅ 76 1.8 1.3 1385 CP/CS/CF• 436 * 1 80 ∅ 76 1.8 1.4 1435 CT/CZ• 436 * 1 80 ∅ 76 1.4 1.0 1420 CT/CZ

W• 438 * 1 80 64 x 86 2.7 2.0 1395 CP/CS/CFW• 438 * 1 80 64 x 86 1.8 1.3 1385 CP/CS/CF• 438 * 1 80 64 x 86 1.8 1.4 1430 CT/CZ• 438 * 1 80 64 x 86 1.4 1.0 1415 CT/CZ

W• 440 * 1 80 64 x 95 2.7 2.0 1395 CP/CF/CSW• 440 * 1 80 64 x 95 1.8 1.3 1385 CP/CF/CS• 440 * 1 80 64 x 95 1.8 1.4 1430 CT/CZ• 440 * 1 80 64 x 95 1.4 1.0 1415 CT/CZ• 632 * 1 80 ∅ 76 1.3 0.9 940 CP/CF/CS• 634 * 1 80 ∅ 76 1.3 0.9 940 CP/CF/CS• 636 * 1 80 ∅ 76 1.3 0.9 940 CP/CF/CS

Single phase• 434 * 1 80 ∅ 76 2.0 1.5 1440 CP/CF/CS• 436 * 1 80 ∅ 76 2.0 1.5 1440 CP/CF/CS• 436 * 1 80 ∅ 76 1.4 0.95 1440 CP/CF/CS• 438 * 1 80 64 x 86 2.0 1.5 1440 CP/CF/CS• 438 * 1 80 64 x 86 1.4 0.95 1440 CP/CF/CS• 440 * 1 80 64 x 95 2.0 1.5 1440 CP/CF/CS• 440 * 1 80 64 x 95 1.4 0.95 1440 CP/CF/CS

• Can be equipped with flush valve * NEVACLOG

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 40 450

1

2

3

4

5

6

7

8

0.0

0.5

1.0

1.5

2.0

LT

412

412

612

612

614

614

414

414

620

620

621

621

622

622

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 10 12 14 16 180

5

10

15

20

25

1.5

2.0

2.5

HT

250

250

252

252

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 300

2

4

6

8

10

0.0

0.5

1.0

1.5

2.0

MT

632

632

432

432

634

634

434

434

636

636

436

436

438

438

440

440

13

C 3102 CP/CS/CT/CZ


P1 P2

W• 410 2 100/150 55 x 100 3.8 3.1 1435 CP/CSW• 411 2 100/150 52 x96 3.8 3.1 1435 CP/CSW• 412 2 100/150 54 x 88 3.8 3.1 1435 CP/CSW• 440 1 100/150 ∅ 100 3.8 3.1 1435 CP/CSW• 441 1 100/150 ∅ 100 3.8 3.1 1435 CP/CSW• 442 1 100/150 ∅ 100 3.8 3.1 1435 CP/CS• 411 2 100/150 52 x 96 2.9 2.4 1450 CT/CZ• 412 2 100/150 54 x 88 2.9 2.4 1450 CT/CZ• 441 1 100/150 ∅ 100 2.9 2.4 1450 CT/CZ• 442 1 100/150 ∅ 100 2.9 2.4 1450 CT/CZ

Weight, kg CP CT/CZ CSLT 117 163 135MT 112 132 121HT 105 – 114

• Can be equipped with flush valve.* NEVACLOG


P1 P2

W• 430 * 1 100 ∅ 76 3.8 3.1 1440 CP/CSW• 432 * 1 100 ∅ 76 3.8 3.1 1440 CP/CSW• 433 * 1 100 ∅ 76 3.8 3.1 1440 CP/CSW• 434 * 1 100 ∅ 76 3.8 3.1 1440 CP/CSW• 435 * 1 100 ∅ 76 3.8 3.1 1440 CP/CS• 432 * 1 100 ∅ 76 2.9 2.4 1455 CT/CZ• 433 * 1 100 ∅ 76 2.9 2.4 1455 CT/CZ• 434 * 1 100 ∅ 76 2.9 2.4 1455 CT/CZ• 435 * 1 100 ∅ 76 2.9 2.4 1455 CT/CZ

CP/CS/CT/CZ


P1 P2

• 252 1 80 ∅ 52 5.4 4.4 2870 CP/CS• 254 1 80 ∅ 52 5.4 4.4 2870 CP/CS

CP/CS

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 400

2

4

6

8

10

12

14

1.0

1.5

2.0

2.5

3.0

3.5

MT

430

430

432

432

433

433

434

434

435

435

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

2

4

6

8

10

1.5

2.0

2.5

3.0

3.5

LT

410

410

411

411

412

412

440

440

441

441

442

442

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 300

5

10

15

20

25

3

4

5

HT

252

252

254

254

14

C 3127 CP/CS/CT/CZ

CP/CS/CT/CZ

Weight, kg CP CT/CZ CSLT 154 221 181MT 142 188 158

• Can be equipped with flush valve. * NEVACLOG


P1 P2

W• 410 * 2 200 ∅ 76 7.0 5.9 1450 CP/CSW• 411 * 2 200 ∅ 76 7.0 5.9 1450 CP/CS• 411 * 2 200 ∅ 76 5.7 4.7 1450 CP/CS

W• 412 * 2 200 ∅ 76 7.0 5.9 1450 CP/CS• 412 * 2 200 ∅ 76 5.7 4.7 1450 CP/CS

W• 441 * 1 200 107 x 117 7.0 5.9 1450 CP/CSW• 442 * 1 200 ∅ 76 7.0 5.9 1450 CP/CS• 442 * 1 200 ∅ 76 5.7 4.7 1450 CP/CS• 411 * 2 200 ∅ 76 5.6 4.7 1460 CT/CZ• 412 * 2 200 ∅ 76 4.8 4.0 1460 CT/CZ• 412 * 2 200 ∅ 76 5.6 4.7 1460 CT/CZ• 442 * 1 200 ∅ 76 4.8 4.0 1460 CT/CZ• 442 * 1 200 ∅ 76 5.6 4.7 1460 CT/CZ


P1 P2

W• 430 1 100 / 150 100 x 110 7.1 5.9 1445 CP/CSW• 431 1 100 / 150 90 x 100 7.1 5.9 1445 CP/CS• 431 1 100 / 150 90 x 100 5.7 4.7 1445 CP/CS

W• 432 1 100 / 150 87 x 100 7.1 5.9 1445 CP/CS• 432 1 100 / 150 87 x 100 5.7 4.7 1445 CP/CS

W• 433 1 100 / 150 82 x 100 7.1 5.9 1445 CP/CS• 433 1 100 / 150 82 x 100 5.7 4.7 1445 CP/CS

W• 434 1 100 / 150 80 x 100 7.1 5.9 1445 CP/CS• 434 1 100 / 150 80 x 100 5.7 4.7 1445 CP/CS

W• 435 1 100 / 150 ∅ 100 7.1 5.9 1445 CP/CSW• 436 1 100 / 150 ∅ 100 7.1 5.9 1445 CP/CS• 436 1 100 / 150 ∅ 100 5.7 4.7 1445 CP/CS• 431 1 100 / 150 90 x 100 5.6 4.7 1460 CT/CZ• 432 1 100 / 150 87 x 100 5.6 4.7 1460 CT/CZ• 432 1 100 / 150 87 x 100 4.8 4.0 1455 CT/CZ• 433 1 100 / 150 82 x 100 5.6 4.7 1460 CT/CZ• 433 1 100 / 150 82 x 100 4.8 4.0 1455 CT/CZ• 434 1 100 / 150 80 x 100 5.6 4.7 1460 CT/CZ• 434 1 100 / 150 80 x 100 4.8 4.0 1455 CT/CZ• 436 1 100 / 150 ∅ 100 5.6 4.7 1460 CT/CZ• 436 1 100 / 150 ∅ 100 4.8 4.0 1455 CT/CZ

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

4

8

12

16

20

2

3

4

5

6

MT

430

430

431

431

432

432

433

433

434

434

435

435

436

436

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 1000

2

4

6

8

10

12

14

3

4

5

6

LT

410

410

411

411

412

412

441

441

442

442

15

C 3127

Weight, kg CP CT/CZ CSHT 136 156 142SH 136 – 142

• Can be equipped with flush valve. * NEVACLOG

CP/CS/CT/CZ


P1 P2

• 250 * 1 80 ∅ 58 8.7 7.4 2900 CP/CSW• 480 * 1 100 ∅ 76 7.1 5.9 1445 CP/CSW• 481 * 1 100 ∅ 76 7.1 5.9 1445 CP/CSW• 483 * 1 100 ∅ 76 7.1 5.9 1445 CP/CS• 483 * 1 100 ∅ 76 5.7 4.7 1445 CP/CS

W• 484 * 1 100 ∅ 76 7.1 5.9 1445 CP/CS• 484 * 1 100 ∅ 76 5.7 4.7 1445 CP/CS

W• 485 * 1 100 ∅ 76 7.1 5.9 1445 CP/CS• 485 * 1 100 ∅ 76 5.7 4.7 1445 CP/CS• 483 * 1 100 ∅ 76 5.6 4.7 1460 CT/CZ• 484 * 1 100 ∅ 76 5.6 4.7 1460 CT/CZ• 484 * 1 100 ∅ 76 4.8 4.0 1460 CT/CZ• 485 * 1 100 ∅ 76 5.6 4.7 1460 CT/CZ• 485 * 1 100 ∅ 76 4.8 4.0 1460 CT/CZ

CP/CS


P1 P2

• 255 * 1 80 40 x 40 8.7 7.4 2900 CP/CS• 256 * 1 80 40 x 40 8.7 7.4 2900 CP/CS• 257 * 1 80 40 x 40 8.7 7.4 2900 CP/CS• 258 * 1 80 40 x 40 8.7 7.4 2900 CP/CS• 259 * 1 80 40 x 40 8.7 7.4 2900 CP/CS

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

10

20

30

40

50

4

6

8

10

SH

255

255

256

256

257

257

258

258

259

259

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

5

10

15

20

25

30

35

0

2

4

6

8

HT

250

250

480

480

481

481

483

483

484

484

485

485

16


P1 P2

• 432 1 150 100 x 109 10.7 9 1455 CP/CS• 434 1 150 100 x 100 10.7 9 1455 CP/CS• 436 1 150 193 x 100 10.7 9 1455 CP/CS

C 3140 CP/CS


P1 P2

• 610 2 250 102 x 110 10.5 8.8 955 CP/CS• 612 2 250 102 x 110 10.5 8.8 955 CP/CS• 614 2 250 82 x 95 10.5 8.8 955 CP/CS

CP/CS


P1 P2

• 452 1 100 ∅ 76 10.7 9 1455 CP/CS• 454 1 100 ∅ 76 10.7 9 1455 CP/CS

CP/CS

Weight, kg CP CSLT 378 436MT 283 364HT 283 310

• Can be equipped with flush valve.

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 80 900

4

8

12

16

20

6

7

8

9

10

MT

432

432

434

434

436

436

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 140 160 1800

1

2

3

4

5

6

7

8

9

6

8

10

LT

610

610

612

612

614

614

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

5

10

15

20

25

30

6

8

10

12

14

HT

452

452

454

454

17

C 3152 CP/CS/CT/CZ


P1 P2

W• 616** 2 300 102 x 102 10.5 8.8 955 CP/CS/CT/CZW• 618** 2 300 102 x 102 10.5 8.8 955 CP/CS/CT/CZW• 620** 2 300 102 x 102 10.5 8.8 955 CP/CS/CT/CZW• 622** 2 300 102 x 102 10.5 8.8 955 CP/CS/CT/CZW• 624** 2 300 102 x 102 10.5 8.8 955 CP/CS/CT/CZ

CP/CS/CT/CZCP/CS/CT/CZ


P1 P2

• 430** 1 200 100 x 115 15.8 13.5 1450 CP/CS/CT/CZW• 431** 1 200 100 x 110 15.8 13.5 1450 CP/CS/CT/CZW• 432** 1 200 109 x 100 15.8 13.5 1450 CP/CS/CT/CZ• 432** 1 200 109 x 100 10.7 9 1455 CP/CS/CT/CZ

W• 434** 1 200 100 x 100 15.8 13.5 1450 CP/CS/CT/CZ• 434** 1 200 100 x 100 10.7 9 1455 CP/CS/CT/CZ

W• 436** 1 200 100 x 930 15.8 13.5 1450 CP/CS/CT/CZ• 436** 1 200 100 x 930 10.7 9 1455 CP/CS/CT/CZ

Weight, kg CP CS CT/CZ(with cooling jacket)

LT 368 425 486MT 279 320 348HT 270 289 314




P1 P2

W• 450 ** 1 100/150 ∅ 76 15.8 13.5 1450 CP/CS/CT/CZW• 452 ** 1 100/150 ∅ 76 15.8 13.5 1450 CP/CS/CT/CZW• 454 ** 1 100/150 ∅ 76 15.8 13.5 1450 CP/CS/CT/CZ• 454 ** 1 100/150 ∅ 76 10.7 9 1455 CP/CS/CT/CZ


Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 1000

5

10

15

20

25

6

8

10

12

14

MT

430

430

431

431

432

432

434

434

436

436

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 2500

1

2

3

4

5

6

7

8

9

6

8

10

LT

616

616

618

618

620

620

622

622

624

624

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

5

10

15

20

25

30

6

8

10

12

14

HT

450

450

452

452

454

454

18

C 3152 SH CP/CS/CT/CZ


SH 262 261 286


P1 P2

• 263 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 264 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 265 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 266 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 267 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 268 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ• 269 ** 1 100 40 x 40 17.0 15 2920 CP/CS/CT/CZ

* NPSHre = 11 m at 20 l/s • Can be equipped with flush valve

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

10

20

30

40

50

60

10

15

20

SH263

263

264

264

265

265

266

266

267

267

268

268

269

269

19

C 3170 CP/CS/CT/CZ


P1 P2

W• 601** 2 250 102 x 102 17.5 15 970 CP/CS/CT/CZW• 602** 2 250 102 x 102 17.5 15 970 CP/CS/CT/CZW• 603** 2 250 102 x 102 17.5 15 970 CP/CS/CT/CZW• 604** 2 250 102 x 102 17.5 15 970 CP/CS/CT/CZ

CP/CS/CT/CZCP/CS/CT/CZ


P1 P2

W• 440** 1 200 ∅ 100 25 22 1460 CP/CS/CT/CZW• 441** 1 200 ∅ 100 25 22 1460 CP/CS/CT/CZ


LT 575 615 670MT 522 542 572HT 480 527 530



P1 P2

W• 460** 1 150 77 x 80 25 22 1460 CP/CS/CT/CZW• 461** 1 150 77 x 80 25 22 1460 CP/CS/CT/CZW• 462** 1 150 ∅ 77 25 22 1460 CP/CS/CT/CZ

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 1000

5

10

15

20

25

30

35

16

18

20

22

24

26

MT

440

440

441

441

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 3000

2

4

6

8

10

12

8

10

12

14

16

LT

601

601

602

602

603

603

604

604

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 800

5

10

15

20

25

30

35

40

45

15

20

25

30

HT

460

460

461

461

462

462

20

C 3201


LT 671 786 917MT 570 598 635HT 525 535 530


CP/CT/CS


P1 P2

W• 624** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZW• 625** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZW• 626** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZW• 627** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZW• 628** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZW• 629** 3 300/350 102 x 102 25 22 970 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

• 450** 1 200 77 x 80 34 30 1455 CP/CS/CT/CZW• 452** 1 200 77 x 77 34 30 1455 CP/CS/CT/CZ• 452** 1 200 77 x 77 25 22 1460 CP/CS/CT/CZ• 455** 1 200 ∅ 100 34 30 1455 CP/CS/CT/CZ• 456** 1 200 ∅ 100 34 30 1455 CP/CS/CT/CZ

W• 457** 1 200 ∅ 100 34 30 1455 CP/CS/CT/CZ• 457** 1 200 ∅ 100 25 22 1460 CP/CS/CT/CZ

W• 458** 1 200 ∅ 100 34 30 1455 CP/CS/CT/CZ• 458** 1 200 ∅ 100 25 22 1460 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

W• 630** 1 250 144 x 120 25 22 970 CP/CS/CT/CZW• 632** 1 250 144 x 120 25 22 970 CP/CS/CT/CZW• 634** 1 250 144 x 120 25 22 970 CP/CS/CT/CZW• 635** 2 250 102 x 842 25 22 970 CP/CS/CT/CZW• 636** 2 250 102 x 842 25 22 970 CP/CS/CT/CZW• 637** 2 250 102 x 842 25 22 970 CP/CS/CT/CZW• 638** 2 250 102 x 842 25 22 970 CP/CS/CT/CZ

Q [l/s]

H [m]

2P [kW]

0 40 80 120 160 2000

4

8

12

16

20

24

10

15

20

MT

630

630

632

632

634

634

635

635

636

636

637

637

638

638

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 300 350 4000

2

4

6

8

10

12

10

15

20

25

LT

624

624

625

625

626

626

627

627

628

628

629

629

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

5

10

15

20

25

30

35

40

45

15

20

25

30

35

40

HT

450

450

452

452

455

455

456

456

457

457

458

458

21

CP/CS/CT/CZ


P1 P2

• 263 *1) 1 100 ∅ 76 34 30 2930 CP/CS/CT/CZ• 264 *1) 1 100 ∅ 76 34 30 2930 CP/CS/CT/CZ• 265 *1) 1 100 ∅ 76 34 30 2930 CP/CS/CT/CZ

1) NPSHre = 11 m at 51 l/s

C 3201 SH

• Can be equipped with flush valve* NEVACLOG

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

10

20

30

40

50

60

70

20

25

30

35

SH

263

263

264

264

265

265


SH 490 489 538

22

C 3300

Weight, kg CP CS CT/CZLT 1060 1175 1308MT 1075 1188 1321HT 900 983 1022


CP/CS/CT/CZ


P1 P2

• 801-809 3 350 102 x 102 43 37 730 CP/CS/CT/CZ• 804-809 3 350 102 x 102 31 27 730 CP/CS/CT/CZ• 620-809 3 350 102 x 102 50 44 975 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

• 452** 1 200 90 x 96 60 54 1475 CP/CS/CT/CZ• 454** 1 200 76 x 90 60 54 1475 CP/CS/CT/CZ• 454** 1 200 76 x 90 45 40 1475 CP/CS/CT/CZ

• 460-463** 2 200 76 x 76 60 54 1475 CP/CS/CT/CZ• 464-468** 2 200 76 x 76 60 54 1475 CP/CS/CT/CZ• 464-468** 2 200 76 x 76 45 40 1475 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

• 632** 1 300 ∅ 190 50 44 975 CP/CS/CT/CZ• 636** 1 300 176 x 100 50 44 975 CP/CS/CT/CZ• 636** 1 300 176 x 180 39 34 975 CP/CS/CT/CZ• 638** 1 300 150 x 100 50 44 975 CP/CS/CT/CZ• 638** 1 300 150 x 180 39 34 975 CP/CS/CT/CZ• 640** 1 300 134 x 100 50 44 975 CP/CS/CT/CZ• 640** 1 300 134 x 180 39 34 975 CP/CS/CT/CZ• 641** 2 300 100 x 100 50 44 975 CP/CS/CT/CZ• 642** 2 300 100 x 100 50 44 975 CP/CS/CT/CZ• 642** 2 300 100 x 100 39 34 975 CP/CS/CT/CZ• 644** 2 300 100 x 100 50 44 975 CP/CS/CT/CZ• 644** 2 300 100 x 100 39 34 975 CP/CS/CT/CZ• 646** 2 300 100 x 100 50 44 975 CP/CS/CT/CZ• 646** 2 300 100 x 100 39 34 975 CP/CS/CT/CZ• 648** 2 300 100 x 100 50 44 975 CP/CS/CT/CZ• 648** 2 300 100 x 100 39 34 975 CP/CS/CT/CZ

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 300 3500

5

10

15

20

25

30

20

30

40

MT

632

632

636

636

638

638

640

640

641

641

642

642

644

644

646

646

648

648

Q [l/s]

H [m]

2P [kW]

0 100 200 300 400 5000

4

8

12

16

20

20

30

40

50

LT

801

801

802

802

803

803

804

804

805

805

806

806

807

807

808

808

809

809

620

620

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 140 1600

10

20

30

40

50

60

0

20

40

60

HT

452

452

454

454

460

460

461

461

462

462

463

463

464

464

465

465

466

466

467

467

468

468

23

C- AND R-PUMPS • 50 HZLARGE SIZE

The C-pumps are equipped with shroudedmulti-channel impellers running in a

volute. The shape and the sizeof the channel minimizeclogging, and therefore

make the pump idealfor waste water containing

large solid particles.

5

10

50

100

20

100 200 500 2 0001 000 Flow, l/s

Head, m

3800

3602

3501

3531

3351

3400

3312

R 3231

3356

3306

3231

24

CP/CS/CT/CZ 3231


P1 P2

430 2 200 ∅ 88 76-181 70-170 1485 CP/CS/CT/CZ

RP/RT

Impeller No. of Outlet dia Through- Motor rpm Availablecode vanes mm RP vers. let, mm rating kW versions

P1 P2

460 6 150 ∅ 24 76-181 70-170 1485 RP/RT

RP RTMax weight, kg 1650 1620

CP CS CT CZMax weight, kg 1820 1910 1730 1730

CP/CS/CT/CZ


P1 P2

455 2 200 ∅ 102 76-181 70-170 1485 CP/CS/CT/CZ655 2 200 ∅ 102 64 58 985 CP/CS/CT/CZ

430

0 150 200 250 300 350 4000

10

20

30

40

50

60

70

10050

H [m]

Q [l/s]

455

655

0 150 200 250 300 350 4000

10

20

30

40

50

60

70

10050

H [m]

Q [l/s]

0 60 80 100 120 140 1600

10

20

30

40

50

60

70

4020

80

90

100

460

180

110H [m]

Q [l/s]

25

CP/CS/CT/CZ 3306


P1 P2

631 3 300 ∅ 104 64-150 58-140 985 CP/CSCT/CZ


RP/RT R 3300

Impeller No. of Outlet dia Through- Motor rpm Availablecode vanes mm let, mm rating kW versions

P1 P2

480 6 150 37 x 37 45 40 1475 RP/RT484 6 150 32 x 32 60 54 1475 RP/RT

RP RTMax weight, kg 820 943

Q [l/s]

H [m]

2P [kW]

0 40 80 120 160 2000

5

10

15

20

25

30

35

20

30

40

50

HT

480

480

484

484

CP/CS/CT/CZ


P1 P2

410 3 300 ∅ 104 181-228 170-215 1480 CP/CS/CT/CZ610 3 300 ∅ 104 64-150 58-140 985 CP/CS/CT/CZ

0 100 200 300 400 500 6000

5

10

15

20

25

30

35

631

H [m]

Q [l/s]

0 200 400 600 800 10000

10

20

30

40

50

60

70

80

410

610

H [m]

Q [l/s]

26

CP/CT/CZ 3356

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions610 3 350 ∅ 102 64-150 58-140 990 CP/CT/CZ810 3 350 ∅ 102 51-61 45-55 735 CP/CT/CZ

CP CT CZMax weight, kg 2050 1950 1950

CP/CS/CT/CZ 3312

CP/CT/CZ


P1 P2

650 2 350 ∅ 110 305-583 290-560 995 CP/CT/CZ

3351




P1 P2

630 3 300 ∅ 102 109-265 100-250 990 CP/CS/CT/CZ830 3 300 ∅ 102 61-100 55-90 735 CP/CS/CT/CZ

0 100 200 300 400 500 600 7000

5

10

15

20

25

30

35

40

45

50

55

630

830

H [m]

Q [l/s]

0 200 400 600 800 10000

10

20

30

40

50

60

70

80

650

H [m]

Q [l/s]

0 100 200 300 400 500 600 7000

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

610

810

H [m]

Q [l/s]

27

CP/CT/CZ 3501

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions830 3 500 ∅ 110 164-293 150-275 740 CP/CT/CZ1030 3 500 ∅ 110 199-183 190-170 590 CP/CT/CZ1230 3 500 ∅ 110 145-109 140-100 490 CP/CT/CZ1430 3 500 ∅ 110 46-68 40-60 420 CP/CT/CZ

CP/CT/CZ 3400

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions630 3 400 110 191-327 180-310 990 CP/CT/CZ830 3 400 110 100-172 90-160 735 CP/CT/CZ1030 3 400 110 44-99 40-90 585 CP/CT/CZ1230 3 400 110 34-45 30-40 490 CP/CT/CZ



0 200 400 600 800 1000 1200 14000

5

10

15

20

25

30

35

40

45

50

630

830

1030

1230

H [m]

Q [l/s]

0 200 400 600 800 1000 1200 1400 1600 18000

2

4

6

8

10

12

14

16

18

20

22

24

26

28

1430

1230

1030

830

H [m]

Q [l/s]

28

CP/CT/CZ 3602

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions840 4 600 ∅ 126 230-479 215-460 745 CP/CT/CZ1040 4 600 ∅ 126 121-264 110-250 595 CP/CT/CZ1240 4 600 ∅ 126 167-152 160-140 495 CP/CT/CZ1440 4 600 ∅ 126 68-88 60-80 420 CP/CT/CZ

CP/CT/CZ 3800

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions1040 4 800 ∅ 140 342-473 325-450 595 CP/CT/CZ1240 4 800 ∅ 140 241-345 225-325 495 CP/CT/CZ

CP/CT/CZ 3531

Impeller No. of Outlet dia Through- Motor rating kW rpm Availablecode vanes mm CP vers. let, mm P1 P2 versions640 3 500 ∅ 105 265-583 250-560 995 CP/CT/CZ840 3 500 ∅ 105 137-417 125-400 745 CP/CT/CZ1040 3 500 ∅ 105 167-231 160-215 590 CP/CT/CZ1240 3 500 ∅ 105 145-152 140-140 495 CP/CT/CZ1440 3 500 ∅ 105 46-79 40-70 420 CP/CT/CZ




0 200 400 600 800 1000 1200 1400 1600 1800 20000

5

10

15

20

25

30

35

40

45

50

55

840

640

1040

1240

1440

H [m]

Q [l/s]

0 200 400 600 800 1000 1200 1400 1600 1800 2000 22000

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

840

1040

1240

1440

H [m]

Q [l/s]

0 600 800 1000 1200 1400 1600 1800 2000 22000

2

4

6

8

10

12

14

16

18

20

22

24

26

2400 2600

28

1040

1240

H [m]

Q [l/s]

29

D-PUMPS • 50 HZ

D-pumps are equipped with a vortex impeller ina volute. Pumping takes place by the impeller

inducing a rapidly rotating vortex, withconsequent pressure rise in the liquid.

As a result, most of the solid particles in theliquid never come into contact

with the impeller, therebyminimizing wear.

The throughletarea of a pump

with a torqueflow impeller is

almost as large as the pump inlet.

2 5 10 20 50 100 Q l/s

2

5

10

20

50

100

Hm200

3045

2201

3152

3102

3080

3085

3127

3067

3057

3140

30

D 2201 DS

Impeller Outlet dia Through- Motor rpm Availablecode mm DP vers. let, mm rating kW versions

P1 P2

275 40 10 41 37 2940 DS276 40 10 41 37 2940 DS277 40 10 41 37 2940 DS

Pump type DSWeight, kg 415

Q (l/s)

H (m)

P2 (kW)

0 2 4 6 8 10 12 14 160

20

40

60

80

100

120

20

25

30

35275 276

277

277

276

275

ST

31

D 3045 DP/DF/DH/DS


P1 P2

230 50 48 1.5 1.2 2790 DP/DF/DH/DS234 50 48 1.5 1.2 2790 DP/DF/DH/DS234 50 48 1.0 0.8 2870 DP/DF/DH/DS

Pump type DP DF DH DSWeight, kg 28 28 28 28

* Single phase


P1 P2

234* 50 48 1.0 0.75 2750 DP/DF/DH/DS

DP/DF/DH/DS

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 7 8 90

1

2

3

4

5

6

7

8

9

0.6

0.8

1.0

1.2

1.4

MT

230

230

234

234

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 70

1

2

3

4

5

6

7

0.5

0.6

0.7

0.8

MT

234

234

32

D 3057 DP/DS/DF


P1 P2

W230 * 50 48 3.1 2.4 2695 DP/DS/DF230 * 50 48 2.3 1.7 2695 DP/DS/DF

W232 * 50 48 3.1 2.4 2695 DP/DS/DF232 * 50 48 2.3 1.7 2695 DP/DS/DF

W234 * 50 48 3.1 2.4 2695 DP/DS/DF234 * 50 48 2.3 1.7 2695 DP/DS/DF

Pump type DP DS DFWeight, kg 31 31 31

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 100

2

4

6

8

10

12

14

1.0

1.5

2.0

2.5

MT

230

230

232

232

234

234

DP/DS/DF


P1 P2

234 * 50 50 2.1 1.5 2695 DP/DS/DF238 * 50 50 2.1 1.5 2695 DP/DS/DF

* Single phase

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 7 8 90

2

4

6

8

10

0.8

1.0

1.2

1.4

1.6

MT

234

234

238

238

33

D 3057Abrasion resistant

DP/DS/DF Abrasion resistant


P1 P2

270 * 50 24 3.1 2.4 2865 DP/DS/DF272 * 50 24 3.1 2.4 2865 DP/DS/DF

DP/DT/DS

Pump type DP DS DTWeight, kg 41 41 45

Impeller Outlet dia Through- Motor rpm Availablecode mm, DP vers. let, mm rating kW versions

P1 P2

272 75 15 x 15 3.3 2.4 2800 DP/DT/DS274 75 15 x 15 3.3 2.4 2800 DP/DT/DS

D 3060

Q [l/s]

H [m]

P2 [kW]

0 2 4 6 8 100

2

4

6

8

10

12

0

1

2

3

274

274

272

272

HT

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 10 120

2

4

6

8

10

12

14

1.0

1.5

2.0

2.5

MT

270

270

272

272

34

D 3067 DP/DS/DF


P1 P2

W470 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW471 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW472 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW473 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW474 * 65 55 or 65 1.7 1.2 1345 DP/DS/DF473 * 65 55 or 65 1.3 0.8 1375 DP/DS/DF

* Single phase

Pump type DP DS DFWeight, kg 41 49 47

DP/DS/DF


P1 P2

W480 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW481 * 65 55 or 65 1.7 1.2 1345 DP/DS/DFW482 * 65 55 or 65 1.7 1.2 1345 DP/DS/DF481 * 65 55 or 65 1.3 0.8 1375 DP/DS/DF

* Single phase

DP/DS


P1 P2

W281 * 50 ∅ 30 1.5 1.2 2770 DP/DSW283 * 50 ∅ 30 1.5 1.2 2820 DP/DS283 * 50 ∅ 30 1.3 0.9 2815 DP/DS

* Single phase

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 10 120

1

2

3

4

5

6

7

8

9

0.8

1.2

1.6

MT

470

470

471

471

472

472

473

473

474

474

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 10 120

1

2

3

4

5

6

7

0.6

0.8

1.0

1.2

1.4

MT

481

481

482

482

480

480

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 50

2

4

6

8

10

12

14

0.6

0.8

1.0

1.2

1.4

LT

281

281

283

283

35

D 3080 DP/DS


P1 P2

263 75 46 7.3 5.5 2800 DP/DS234 75 46 7.3 5.5 2800 DP/DS431 100 80 5.8 3.8 1400 DP/DS

Weight, kg DP DSAluminium 60 60Cast iron 100 100

Q [l/s]

H [m]

P2 [kW]

0 5 10 15 20 250

5

10

15

20

25

30

35

0

2

4

6

234

234

431

431

263

263

36

D 3085 DP/DS


P1 P2

276 80 ∅ 52 3.0 2.4 2830 DP/DS278 80 ∅ 52 3.0 2.4 2830 DP/DS

Weight, kg DP DSMT 51 55HT 51 55

DP/DS


P1 P2

• 470 * 80 ∅ 76 2.7 2.0 1395 DP/DS• 472 * 80 ∅ 76 2.7 2.0 1395 DP/DS• 474 * 80 ∅ 76 2.7 2.0 1395 DP/DS• 474 * 80 ∅ 76 1.8 1.3 1380 DP/DS• 472 * 80 ∅ 76 2.0 1.5 1440 DP/DS• 474 * 80 ∅ 76 2.0 1.5 1440 DP/DS

* Single phase


DP/DS Hardened cast iron


P1 P2

• 485* 80 ∅ 76 2.7 2.0 1395 DP/DS• 486 * 80 ∅ 76 2.7 2.0 1395 DP/DS• 487* 80 ∅ 76 2.7 2.0 1395 DP/DS• 487 * 80 ∅ 76 1.8 1.3 1380 DP/DS• 486 * 80 ∅ 76 2.0 1.5 1440 DP/DS• 487 * 80 ∅ 76 2.0 1.5 1440 DP/DS

* Single phase

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

1

2

3

4

5

6

7

8

9

1.0

1.5

2.0

2.5

MT

470

470

472

472

474

474

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 7 8 90

2

4

6

8

10

12

14

16

18

2

3

4

5

HT

276

276

278

278

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

1

2

3

4

5

6

7

8

9

1.0

1.5

2.0

2.5

MT

485

485

486

486

487

487

37

D 3102 DP


P1 P2

W• 470 80 ∅ 100 3.8 3.1 1435 DPW• 471 80 ∅ 100 3.8 3.1 1435 DPW• 472 80 ∅ 100 3.8 3.1 1435 DP

Weight, kg DPMT 105HT 81


DP


P1 P2

• 276 80 ∅ 52 5.4 4.4 2870 DP• 278 80 ∅ 52 5.4 4.4 2870 DP

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 350

2

4

6

8

10

1.5

2.0

2.5

3.0

MT

470

470

471

471

472

472

Q [l/s]

H [m]

2P [kW]

0 4 8 12 16 200

2

4

6

8

10

12

14

16

18

0

2

4

6

8

HT

276

276

278

278

38

D 3127 DP


P1 P2

W• 400 * 100 ∅ 100 7.1 5.9 1450 DPW• 401 * 100 ∅ 100 7.1 5.9 1450 DP• 401 * 100 ∅ 100 5.7 4.7 1460 DPW• 470 100 ∅ 100 7.1 5.9 1450 DPW• 471 100 ∅ 100 7.1 5.9 1450 DP• 471 100 ∅ 100 5.7 4.7 1460 DP

W• 472 100 ∅ 100 7.1 5.9 1450 DP• 472 100 ∅ 100 5.7 4.7 1460 DP


• Can be equipped with flush valve* Hardened cast iron


P1 P2

• 205 * 78 ∅ 76 8.7 7.4 2900 DP• 206 * 78 ∅ 76 8.7 7.4 2900 DP• 207 * 78 ∅ 76 8.7 7.4 2900 DP• 275 * 78 ∅ 76 8.7 7.4 2900 DP• 276 * 78 ∅ 76 8.7 7.4 2900 DP• 277 * 78 ∅ 76 8.7 7.4 2900 DP


DP

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 350

5

10

15

20

25

4

6

8

10

12

HT

275, 205

275, 205

276, 206

276, 206

277, 207

277, 207

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 40 450

2

4

6

8

10

12

14

2

3

4

5

6

7

MT

470400

470400

471401

471401

472

472

39

D 3140 DP


P1 P2

• 471* 100 ∅ 100 10.7 9 1450 DP• 476* 100 ∅ 100 10.7 9 1450 DP

Pump type DPWeight, kg 216


Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

2

4

6

8

10

12

14

16

18

6

8

10

MT

471

471

476

476

40

D 3152 DP


P1 P2

W• 470 100 ∅ 100 15.8 13.5 1450 DPW• 471 100 ∅ 100 15.8 13.5 1450 DP• 471 100 ∅ 100 10.7 9 1455 DP

W• 472 100 ∅ 100 15.8 13.5 1450 DP• 472 100 ∅ 100 10.7 9 1455 DP

W• 473 100 ∅ 100 15.8 13.5 1450 DP• 473 100 ∅ 100 10.7 9 1455 DP

W• 475 * 100 ∅ 100 15.8 13.5 1450 DPW• 476 * 100 ∅ 100 15.8 13.5 1450 DP• 476 * 100 ∅ 100 10.7 9 1455 DP• 477 * 100 ∅ 100 10.7 9 1455 DP• 478 * 100 ∅ 100 10.7 9 1455 DP



DP


P1 P2

• 281 * 80 ∅ 58 17.0 15.0 2920 DP• 282 * 80 ∅ 58 17.0 15.0 2920 DP• 283 * 80 ∅ 58 17.0 15.0 2920 DP• 284 * 80 ∅ 58 17.0 15.0 2920 DP• 285 * 80 ∅ 58 17.0 15.0 2920 DP• 286 * 80 ∅ 58 17.0 15.0 2920 DP


Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 350

10

20

30

40

50

10

15

20

HT

281

281

282

282

283

283

284

284

285

285

286

286

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

4

8

12

16

20

0

4

8

12

16

MT

470

470

471

471

472

472

473

473

475

475

476

476

477

477

478

478

41

F-PUMPS • 50 HZ

F-pumps have an open impeller in a volute.The impeller is S-shaped and is fitted with a

cutter, to enable it to chop up straw and otherlong-fibrous material. This prevents clogging.

The inlet part of the impeller isscrew shaped, which enables

the feeding of manure whenit is thickest and mostdifficult to move, into

the pump. The cutting platetogether with the impeller chop up long-

fibrous material before it enters into the pump.

3 5 10 30 50 100

2

5

10

20

30

1

2 150Ql/s

Hm

3127

3127

31273102

31023085 30853067

3067

3152

3152

3152

31523152

42

F 3067 FP/FS

Impeller No. of Outlet dia Motor rpm Availablecode vanes mm FP vers. rating kW versions

P1 P2

W290 * 3 50 1.6 1.2 2820 FP/FSW291 * 3 50 1.6 1.2 2820 FP/FS291 * 3 50 1.5 1.0 2845 FP/FS

Pump type FP FSWeight, kg 38 38

* Single-phase

F 3085 FP/FS



P1 P2

W490 * 2 100 2.7 2.0 1395 FP/FSW492 * 2 100 2.7 2.0 1395 FP/FS492 * 2 100 2.0 1.5 1440 FP/FS

* Single-phase

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 6 7 8 90

2

4

6

8

10

0.6

0.8

1.0

1.2

1.4

LT

290

290

291

291

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

2

4

6

8

10

1.2

1.4

1.6

1.8

LT

490

490

492

492

43

F 3102 FP/FS


P1 P2

W490 2 100 3.8 3.1 1440 FP/FSW491 2 100 3.8 3.1 1440 FP/FSW492 2 100 3.8 3.1 1440 FP/FS


F 3127FP/FS/FJ

Pump type FP FS FJWeight, kg 154 157 162


P1 P2

W490 2 150 7.0 5.9 1445 FP/FS/FJ490 2 150 5.7 4.7 1445 FP/FS/FJ

W491 2 150 7.0 5.9 1445 FP/FS/FJ491 2 150 5.7 4.7 1445 FP/FS/FJ

W492 2 150 7.0 5.9 1445 FP/FS/FJ492 2 150 5.7 4.7 1445 FP/FS/FJ

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 300

2

4

6

8

10

12

1.5

2.0

2.5

3.0

LT

490

490

491

491

492

492

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

2

4

6

8

10

3

4

5

6

LT

490

490

491

491

492

492

44

F 3152 FP/FS/FJ

Pump type FP FS FJWeight, kg 235 234 241


P1 P2

494 2 100 15.8 13.5 1450 FP/FS/FJ495 2 100 15.8 13.5 1450 FP/FS/FJ495 2 100 10.7 19.0 1450 FP/FS/FJ496 2 100 15.8 13.5 1450 FP/FS/FJ496 2 100 10.7 19.0 1450 FP/FS/FJ496 2 100 8.9 17.5 1450 FP/FS/FJFP/FS/FJ


P1 P2

489 2 150 15.8 13.5 1450 FP/FS/FJ490 2 150 15.8 13.5 1450 FP/FS/FJ491 2 150 15.8 13.5 1450 FP/FS/FJ491 2 150 10.7 19.0 1450 FP/FS/FJ492 2 150 10.7 19.0 1450 FP/FS/FJ492 2 150 8.9 17.5 1450 FP/FS/FJ493 2 150 15.8 13.5 1450 FP/FS/FJ690 2 150 10.5 18.8 960 FP/FS/FJ691 2 150 10.5 18.8 960 FP/FS/FJ693 2 150 10.5 18.8 960 FP/FS/FJ

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 1000

2

4

6

8

10

12

14

16

0

5

10

15

LT

489

489

490

490

690

690

491

491

691

691

492

492

493

493

693

693

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

5

10

15

20

25

6

8

10

12

HT

494

494

495

495

496

496

45

H-PUMPS • 50 HZ

The H-pump’s impeller is an open orshrouded channel impeller,

made of a highly wearresistant cast

material. The pump-housing incorporate

adjustable and replaceablerubberlined wear parts.

2 5 10 20 50 100 Q L/S

2

5

10

20

Hm50

3201

3201

3152 3152

3127

3127

46

H 3127 HS

Weight, kg HSHT 157

Impeller No. of Outlet dia Through- Rated rpm Availablecode channels mm let, mm power kW versions

P1 P2

W466 1 ∅ 80 51 7.0 5.9 1445 HS466 1 ∅ 80 51 5.7 4.7 1445 HS

W468 1 ∅ 80 50 7.0 5.9 1445 HS468 1 ∅ 80 50 5.7 4.7 1445 HS

H 3152HP/HS

Weight, kg HP HSHT 263 274


P1 P2

460 * 3 ∅ 150 50 15.8 13.5 1450 HSW462 * 3 ∅ 150 50 15.8 13.5 1450 HS462 * 3 ∅ 150 50 10.7 9 1455 HS

* NPSHre = 11 m at 84 l/s

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 400

4

8

12

16

20

2

3

4

5

HT

466

466

468

468

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 80 900

5

10

15

20

25

4

6

8

10

12

14

HT

460

460

462

462

47

H 3201 HS

Weight, kg HSHT 497


P1 P2

460 3 ∅ 150 59 x 62 25 30 1455 HSW462 3 ∅ 150 59 x 65 25 30 1455 HS462 3 ∅ 150 59 x 65 34 22 1460 HS

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

5

10

15

20

25

30

35

10

15

20

25

30

HT

460

460

462

462

48

H-PUMPS • 50 HZHIGH CHROME AND POLYURETHANE

Heavy duty three channel impellermanufactured from high chrome orpolyurethane.

H (m)

Q(l/s)30010050301053

2

5

10

20

50

100

5550

55605540

5530

5520

49

H 5520 HP/HS/HT/HZ

Pump type HP HS HT HZWeight, kg HC 122 171 161 122


P1 P2

432 HC 3 ∅ 100 30 3.8 3.1 1440 HP/HS/HT/HZ434 HC 3 ∅ 100 30 3.8 3.1 1440 HP/HS/HT/HZ436 HC 3 ∅ 100 30 3.8 3.1 1440 HP/HS/HT/HZ438 HC 3 ∅ 100 30 3.8 3.1 1440 HP/HS/HT/HZHC = High chrome

P2 (kW)

0

1

2

3

4432

434

436438

Head (m)

0 5 10 15 20 25 30 35 400

2

4

6

8

10

12

14

16

18

432434438 436

Capacity (l/s)

H 5100 HS

Pump type HSWeight, kg HC 260


P1 P2

630 HC * 3 ∅ 100 40 10.5 8.8 970 HS631 HC * 3 ∅ 100 40 10.5 8.8 970 HS430 HC * 3 ∅ 100 40 15.7 13.5 1450 HS431 HC * 3 ∅ 100 40 15.7 13.5 1450 HS432 HC * 3 ∅ 100 40 15.7 13.5 1450 HS433 HC * 3 ∅ 100 40 15.7 13.5 1450 HS

HC = High chrome

Head [m]

Shaft Power [kW]

0 10 20 30 40 50 600

5

10

15

20

25

0

4

8

12430, 431*

432, 433*

630, 631*

Capacity [l/s]

430, 431*

432, 433*

630, 631*

* With agitator

50

H 5530 HP/HS

Pump type HP HSWeight, kg HC 203 309


P1 P2

434 HC * 3 ∅ 150 40 7.0 5.9 1450 HP/HS436 HC * 3 ∅ 150 40 7.0 5.9 1450 HP/HS437 HC * 3 ∅ 150 40 7.0 5.9 1450 HP/HS

* with agitator

P2 (kW)

0

1

2

3

4

5

434

436, 437*

Head (m)

0 10 20 30 40 50 600

2

4

6

8

10

12

14

16

18

434

436, 437

Capacity (l/s)

51

H 5540 HP/HS/HT/HZ



P1 P2

430 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ432 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ433 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ434 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ435 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ436 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ437 HC * 3 ∅ 150 40 15.7 13.5 1450 HP/HS/HT/HZ

* with agitator

P2 (kW)

0

4

8

12

16

430

432, 433*

434, 435*436, 437*

Head (m)

0 10 20 30 40 50 60 700

5

10

15

20

25

432, 433

430

436, 437434, 435

Capacity (l/s)

30

52

H 5550 HP/HS/HT/HZ



P1 P2

634 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ635 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ636 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ637 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ638 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ639 HC * 3 ∅ 200 60 25 22 965 HP/HS/HT/HZ450 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ452 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ453 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ454 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ455 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ456 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ457 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ458 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ459 HC * 3 ∅ 200 40 34 30 1455 HP/HS/HT/HZ

P2 (kW)

0

10

20

30

40

450452, 453*454, 455*

456, 457*

458, 459*

634, 635*

636, 637*638, 639*

* With agitator, extra powerdraw;0.7 kW (451)4.0 kW (453, 455, 457, 459)0.4 kW (5560-631, 5550-635)1.1 kW (5560-633, -635, -637, -639, -643, -645, -647, -649, 5550-637, -639)

Capacity (l/s)

Head (m)

0 20 40 60 80 100 120 140 160 1800

5

10

15

20

25

30

35

40

456,457

458, 459

450452, 453

638,639

636,637

454, 455

634, 635

53

H 5560 HP/HS/HT/HZ



P1 P2

630 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ631 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ632 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ633 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ634 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ635 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ636 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ637 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ638 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ639 HC * 3 ∅ 200 60 50 44 970 HP/HS/HT/HZ450 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ452 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ453 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ454 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ455 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ456 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ457 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ458 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ459 HC * 3 ∅ 200 40 60 54 1470 HP/HS/HT/HZ

* With agitator, extra powerdraw;0.7 kW (451)4.0 kW (453, 455, 457, 459)0.4 kW (5560-631, 5550-635)1.1 kW (5560-633, -635, -637, -639, -643, -645, -647, -649, 5550-637, -639)

P2 (kW)

0

20

40

60

80

450452, 453*

454, 455*

456, 457*458, 459*

630, 631*632, 633*

634, 635*636, 637*

638, 639*

Head (m)

0 40 80 120 160 2000

10

20

30

40

50

60

458, 459

454, 455

638, 639

Capacity (l/s)

636, 637634, 635

632, 633630, 631

450

452, 453

456, 457

54

L-PUMPS • 50 HZ

The L-pump’s impeller is a shroudedchannel impeller in a volute with guidevanes. The guide-vanesection leads the rotatingwater outward andupward on the outsideof the pump. L-pumpsare mainly used insewage-treatment plantsand in such applications as storm-waterpumping, irrigation and drainage.

3602

3531

3400

33563300

3201

31523127

3102

3085

20 50 100 200 500 1000 2000

2

5

10

20

30

1

3000Ql/s

Hm

10

55

L 3085 L

Impeller Overall dia Motor rating, kW rpmcode mm diffuser ring P1 P2

W412 ∅ 380 2.7 2.0 1385W414 ∅ 380 2.7 2.0 1395

L 3102 L

Pump type LWeight, kg 95


W410 ∅ 380 3.8 3.1 1435W411 ∅ 380 3.8 3.1 1435W412 ∅ 380 3.8 3.1 1435

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 40 450

1

2

3

4

5

1.0

1.5

2.0

2.5

LT

412

412

414

414

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

1

2

3

4

5

6

7

1.5

2.0

2.5

3.0

3.5

LT

410

410

411

411

412

412


56

NL 3102 NL

Pump type NLWeight, kg 99


W421 ∅ 380 3.8 3.1 1435W423 ∅ 380 3.8 3.1 1435

L 3127 L



W410 ∅ 480 7.1 5.9 1445W411 ∅ 480 7.1 5.9 1445411 ∅ 480 5.7 4.7 1445

W412 ∅ 480 7.1 5.9 1445412 ∅ 480 5.7 4.7 1445

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

1

2

3

4

5

6

7

2.0

2.5

3.0

LT

421

421

423

423

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

1

2

3

4

5

6

7

8

9

3

4

5

6

7

LT

410

410

411

411

412

412

57

NL 3127 NL


L 3152 L



W616 * ∅ 590 10.5 8.8 960W618 * ∅ 590 10.5 8.8 960W620 * ∅ 590 10.5 8.8 960W622 * ∅ 590 10.5 8.8 960W624 * ∅ 590 10.5 8.8 960

* NPSHre = 11 m at 235 l/s


W420 ∅ 480 7.1 5.9 1445W421 ∅ 480 7.1 5.9 1445421 ∅ 480 5.7 4.7 1445

W422 ∅ 480 7.1 5.9 1445422 ∅ 480 5.7 4.7 1445

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 1000

2

4

6

8

10

12

14

3

4

5

6

LT

420

420

421

421

422

422

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 2500

1

2

3

4

5

6

6

8

10

12

LT

616

616

618

618

620

620

622

622

624

624

58

L 3201 L



W624 ∅ 720 25 22 970W625 ∅ 720 25 22 970W626 ∅ 720 25 22 970W627 ∅ 720 25 22 970W628 ∅ 720 25 22 970W629 ∅ 720 25 22 970

L 3300L



801-809 ∅ 780 37 37 730804-809 ∅ 780 31 27 730

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 300 350 4000

2

4

6

8

10

15

20

25

30

LT

624

624

625

625

626

626

627

627

628

628

629

629

Q [l/s]

H [m]

2P [kW]

0 100 200 300 400 5000

2

4

6

8

10

12

14

16

20

30

40

LT

801

801

802

802

803

803

804

804

805

805

806

806

807

807

808

808

809

809

59

NL 3300 NL



621-624 ∅ 800 50 44 975623-624 ∅ 800 39 34 975821-824 ∅ 800 43 37 730821-824 ∅ 800 31 27 730

Q [l/s]

H [m]

2P [kW]

0 100 200 300 400 5000

4

8

12

16

20

0

10

20

30

40

LT

621

621

821

821

622

622

822

822

623

623

823

823

624

624

824

824

60

Pump type LWeight, kg 1040-1900


610 ∅ 785 64-173 58-160 990810 ∅ 785 51-613 45-553 740

L 3356 LL



690 ∅ 860 213-359 200-340 990890 ∅ 860 100-155 90-140 7351090 ∅ 860 44-79 40-70 5851290 ∅ 860 34-51 30-45 490

L 3400 LL

0 200 300 400 500 600 7000

4

8

12

16

20

24

28

610

810

H [m]

Q [l/s]

500 600 700 800 900 11000

5

10

15

20

25

30

35

400 1000 1200300200

890

690

1090

1290

H [m]

Q [l/s]

61



840 ∅ 1160 111-246 100-230 7451040 ∅ 1160 379-137 370-125 595

L 3531 LL



840 ∅ 1160 246-449 230-430 7451040 ∅ 1160 111-268 100-250 5951240 ∅ 1160 167-174 160-160 4951440 ∅ 1160 46-79 40-70 420

L 3602 LL

0 400 500 600 700 800 900 1000 1100 1200 13000

2

4

6

8

10

12

14

16

18

20

22

1400

840

1040

H [m]

Q [l/s]

0 600 800 1000 1200 1400 1600 1800 2000 22000

2

4

6

8

10

12

14

16

18

20

22

24

26

2400

840

1040

1240

1440

H [m]

Q [l/s]

62

M-PUMPS • 50 HZ

The M-pump features an effective grinderassembly. Specially designed for pressuresewage systems. The vortex impeller is fittedwith a cutting device at the inlet.All solids are reduced to particlesno larger than 5 x 15 mm.The result is a fineslurry that can bepumped through pipesas narrow as 32 mm in diameter.

3085

30853085

3102

3102 3127

3127

3068

5

10

50

20

2

(m)

H

2 5 10 20 (l/s)Q

63

M 3068 MP/MH/MF

Pump type MP MF MHWeight, kg 31 31 31

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions• 210 * ∅ 50 3.2 2.4 2700 MP/MH/MF• 212 * ∅ 50 3.2 2.4 2700 MP/MH/MF• 212 * ∅ 50 2.3 1.7 2700 MP/MH/MF• 214 * ∅ 50 2.3 1.7 2700 MP/MH/MF

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions• 214 * ∅ 50 2.0 1.5 2730 MP/MH/MF

* Single-phase.

MP/MH/MF

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 50

5

10

15

20

25

30

1.5

2.0

2.5

HT

210

210

212

212

214

214

Q [l/s]

H [m]

2P [kW]

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.50

4

8

12

16

20

1.2

1.4

1.6

1.8

HT

214

214


64

M 3085 MP/MH/MF

Pump type MP MH MFWeight, kg 53 52 53

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions• 250 * ∅ 50 3.0 2.4 2830 MP/MH/MF• 253 * ∅ 50 3.0 2.4 2830 MP/MH/MF• 254 * ∅ 50 3.0 2.4 2830 MP/MH/MF• 254 * ∅ 50 2.2 1.8 2880 MP/MH/MF• 259 * ∅ 50 3.0 2.4 2830 MP/MH/MF• 259 * ∅ 50 2.2 1.8 2880 MP/MH/MF

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions• 249 * ∅ 50 2.5 1.9 2915 MP/MH/MF• 254 * ∅ 50 2.5 1.9 2915 MP/MH/MF

* Single-phase.

MP/MH/MF

Q [l/s]

H [m]

2P [kW]

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.00

5

10

15

20

25

30

35

1.5

2.0

2.5

HT

250

250

253

253

254

254

259

259

Q [l/s]

H [m]

2P [kW]

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.00

5

10

15

20

25

1.2

1.6

2.0

HT

249

249

254

254


65

M 3102 MP/MF

Weight, kg MP MFLT/HT 78 78

Impeller Overall dia mm Motor rating, kW rpm Availablecode MP vers P1 P2 versions• 210 ISO G2/2” NPT 5.4 4.4 2870 MP/MF

MP/MF

Impeller Overall dia mm Motor rating, kW rpm Availablecode MP vers P1 P2 versions• 261 ISO G2/2” NPT 5.4 4.4 2870 MP/MF

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 100

5

10

15

20

25

3.5

4.0

4.5

5.0

LT

210

210

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 60

5

10

15

20

25

30

35

40

3.0

3.5

4.0

4.5

5.0

HT

261

261


66

M 3127 MP/MF

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions• 210 ∅ 50 8.7 7.4 2905 MP/MF

MP/MF

Impeller Overall dia Motor rating, kW rpm Availablecode mm MP vers P1 P2 versions252 ∅ 50 8.7 7.4 2905 MP/MF

Weight, kg MP MFLT/HT 109 109

Q [l/s]

H [m]

2P [kW]

0 2 4 6 8 10 120

5

10

15

20

25

30

5

6

7

LT

210

210

Q [l/s]

H [m]

2P [kW]

0 1 2 3 4 5 60

10

20

30

40

50

5

6

7

8

HT

252

252


67

MIXERS • 50 HZ

Motor

Single phase Max. power, input: 1.8 kWRated power, output: 1.3 kWSpeed: 1440 RPM

3-phase Max. power, input: 1.3 kWRated power, output: 0.9 kWSpeed: 930* RPM



WEIGHT: 43 kg

Motor



WEIGHT: 250 kgMIXER SPEED: 17-40 RPM

Motor



WEIGHT: 280 kgMIXER SPEED: 32-54 RPM

* 400 V

4400

4410

4430

Motor


WEIGHT: 16.2 kg

Motor


WEIGHT: 17.5 kg

4610

4620

68

Motor


WEIGHT: 60 kg (incl. jetring)

4630

Motor



Motor



Motor



Motor



Motor

3-phase Max. power, input: 32 kWRated power, output: 25 kWSpeed: 360* RPM


4640

4650

4660

4670

4680

* 400 V

69

Submersible mixers (overview of selection)Mixing Range Chart

4400 4410/ 4610 4620 4630 4640 4650 4660 4670 46804430

Aeration basins ✖ ■ ▲ ✖ ✖ ✖ ● ■ ■ ★

Dinitrification tanks ✖ ■ ▲ ✖ ✖ ✖ ● ■ ■ ★

Floculation ❍ ■ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

Digesters ❍ ❍ ❍ ✖ ✖ ● ● ■ ■ ★

Sludge homogenizing 5 % ❑ ❍ ❍ ▲ ▲ ✖ ● ● ■ ★

Neutralization ● ★ ✖ ● ● ■ ■ ★ ★ ★

Stormwater retention basins ✖ ❍ ▲ ✖ ✖ ✖ ● ■ ★ ★

Liquid manure ▲ ❍ ❍ ✖ ✖ ● ● ■ ■ ★

Biological processes ▲ ❍ ❍ ▲ ✖ ✖ ● ■ ■ ★

Paper pulp 3-4 % ❑ ❍ ❍ ❑ ❑ ❑ ❑ ▲ ▲ ✖

Lime slurry 40 % ❑ ❍ ❍ ❑ ❑ ❑ ▲ ✖ ● ■

Other mineral slurries 40 % ❑ ❍ ❍ ❑ ❑ ❑ ▲ ✖ ● ■

Cooling basins ❑ ❍ ❑ ❑ ❑ ▲ ✖ ✖ ● ■

Blending (0.5 h, visc. <500 cp) ✖ ■ ✖ ✖ ✖ ● ■ ★ ★ ★

Blending (0.5 h, visc. >500 cp) ✖ ● ▲ ✖ ✖ ✖ ● ● ● ■

Ice prevention ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴

Spray painting plants ▲ ❍ ❑ ▲ ▲ ✖ ✖ ● ❍ ❍

Emptying of lagoons ✴✴ ✴✴ ✴✴ ✴✴ ✴✴ ✴✴ ✴✴ ✴✴ ✴✴ ✴✴

Destratification & prevention ★ ★ ■ ★ ★ ★ ★ ★ ★ ★of crust buildup

Volume ranges:Volumes are indicated for one single mixer unit.Volumes for applications not listed will depend on: tankconfiguration, variations in liquid consistency, properpositioning of the mixer(s) and on unusual localconditions.

Materials of constructionITT Flygt offers a wide range of suitable materials ofconstruction. In addition to the standard models in highquality, pressure-resistant cast iron, models areavailable also in acid- and corrosion-resistant stainlesssteel. Modular design allows the selective assembly ofparts in various material combinations.

❍ Normally not applicable❑ 2220-2230 m3

▲ 2220-2100 m3

✖ 2260-2300 m3

● 2200-1000 m3

■ 2600-3000 m3

★ 2000- m3

✴ Open water surface area, ranging from 0 to 5000 m2

depending on mixer and conditions.

✴✴ Partial (localized) mixing.Sizing dependent on slurry quality and pumping capacity.

Note:The above values are recommended only, based on empiricaldata. For detailed information contact your nearest FLYGTSales Office. A mixer application specialist will analyze yourdata and, using the latest in computer software technology,will provide exact specifications, selection and layout mostsuitable and most economical for your particular application.

70

N-PUMPS • 50 HZSMALL AND MEDIUM SIZE

The state of the art impeller design for waste water. Excellentclog resistance is combined with high efficiency. The highefficiency is maintainedover time due to theself cleaning designincorporating heavilyback swept leadingedges and a reliefgroove in the volute.

N 3300

N 3201

N 3171

N 3170

N 3153

N 3152

N 3127

N 3140

N 3102

N 3085

5 10 20 50 100 200 500 (l/s)

5

10

20

40

(m)

71

N 3085 NP/NS/NT/NZ

Impeller No. of Outlet dia Motor rpm Availablecode vanes mm NP vers. rating kW versions

P1 P2

• 460 * 2 80/100 2.7 2.0 1395 NP/NS/NT/NZ• W461 * 2 80/100 2.7 2.0 1395 NP/NS/NT/NZ• W463 * 2 80/100 2.7 2.0 1395 NP/NS/NT/NZ• 461 * 2 80/100 2.0 1.5 1440 NP/NS/NT/NZ• 463 * 2 80/100 2.0 1.5 1440 NP/NS/NT/NZ

* Single-phase

Weight, kg NP NS NT NZ

MT 66 68 71 88

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 35 400

2

4

6

8

10

1.0

1.5

2.0

2.5

MT

460

460

461

461

463

463


72

N 3102 NP/NS/NT/NZ


P1 P2

• W420 2 150 3.8 3.1 1435 NP/NS• W421 2 150 3.8 3.1 1435 NP/NS• W423 2 150 3.8 3.1 1435 NP/NS

420 2 150 2.9 2.4 1450 NT/NZ421 2 150 2.9 2.4 1450 NT/NZ423 2 150 2.9 2.4 1450 NT/NZ


LT 120 138 166 209MT 107 116 154 191

NP/NS/NT/NZ


P1 P2

• W460 2 150 3.8 3.1 1435 NP/NS• W461 2 150 3.8 3.1 1435 NP/NS• W462 2 150 3.8 3.1 1435 NP/NS• W463 2 150 3.8 3.1 1435 NP/NS• W464 2 150 3.8 3.1 1435 NP/NS

460 2 150 2.9 2.4 1450 NT/NZ461 2 150 2.9 2.4 1450 NT/NZ462 2 150 2.9 2.4 1450 NT/NZ463 2 150 2.9 2.4 1450 NT/NZ464 2 150 2.9 2.4 1450 NT/NZ

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 600

2

4

6

8

10

2.0

2.5

3.0

3.5

LT

420

420

421

421

423

423

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

2

4

6

8

10

12

14

2

3

4

MT

460

460

461

461

462

462

463

463

464

464


73

N 3127 NP/NS/NT/NZ


P1 P2

• 420 2 150 7.0 5.9 1450 NP/NS• W421 2 150 7.0 5.9 1450 NP/NS• 421 2 150 5.7 4.7 1445 NP/NS

• W422 2 150 7.0 5.9 1445 NP/NS• 422 2 150 5.7 4.7 1445 NP/NS421 2 150 5.7 4.7 1445 NT/NZ422 2 150 5.7 4.7 1445 NT/NZ421 2 150 4.8 4.0 1445 NT/NZ422 2 150 4.8 4.0 1445 NT/NZNP/NS/NT/NZ


P1 P2

• W437 2 100/150 7.0 5.9 1450 NP/NS• W438 2 100/150 7.0 5.9 1450 NP/NS• 438 2 100/150 5.7 4.7 1445 NP/NS

• W439 2 100/150 7.0 5.9 1445 NP/NS• 439 2 100/150 5.7 4.7 1445 NP/NS438 2 100/150 5.7 4.7 1445 NT/NZ439 2 100/150 5.7 4.7 1445 NT/NZ439 2 100/150 4.8 4.0 1445 NT/NZ


LT 154 183 220 220MT 142 158 188 188

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 80 900

2

4

6

8

10

12

14

16

3

4

5

6

LT

420

420

421

421

422

422

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

2

4

6

8

10

12

14

16

18

3

4

5

6

MT

437

437

438

438

439

439


74

NP/NS/NT/NZ


P1 P2

• 486 2 100 7.0 5.9 1450 NP/NS• 486 2 100 5.7 4.7 1445 NP/NS• 487 2 100 7.0 5.9 1450 NP/NS• 487 2 100 5.7 4.7 1445 NP/NS

• W488 2 100 7.0 5.9 1450 NP/NS• 488 2 100 5.7 4.7 1445 NP/NS

• W489 2 100 7.0 5.9 1450 NP/NS• 489 2 100 5.7 4.7 1445 NP/NS488 2 100 5.7 4.7 1445 NT/NZ488 2 100 4.8 4.0 1445 NT/NZ489 2 100 5.7 4.7 1445 NT/NZ489 2 100 4.8 4.0 1445 NT/NZ

N 3127


HT 136 142 156 200

Capacity [l/s]

Head [m]

0 10 20 30 40 500

5

10

15

20

25

0

2

4

6

486

486

487

487

488

488

489

489

HT

2P [kW]


75

N 3140

N 3152

Weight, kg NP NS

MT 252 281

NP/NS


P1 P2

• 443 2 150 10.7 9.0 1455 NP/NS• 445 2 150 10.7 9.0 1455 NP/NS


MT 279 320 348 348


P1 P2

• 441 2 150 15.8 13.5 1450 NP/NS/NT/NZ• W443 2 150 15.8 13.5 1450 NP/NS/NT/NZ• 443 2 150 10.7 9.0 1455 NP/NS/NT/NZ

• W445 2 150 15.8 13.5 1450 NP/NS/NT/NZ• 445 2 150 10.7 9.0 1455 NP/NS/NT/NZ

NP/NS/NT/NZ

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

2

4

6

8

10

12

14

16

18

6

7

8

9

MT

443

443

445

445

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

4

8

12

16

20

24

6

8

10

12

14

MT

441

441

443

443

445

445


76

N 3153 NP/NS/NT/NZ


P1 P2

• W410 2 200 12.7 11.0 1460 NP/NS/NT/NZ• W411 2 200 12.7 11.0 1460 NP/NS/NT/NZ• 411 2 200 10.4 9.0 1460 NP/NS/NT/NZ

• W412 2 200 12.7 11.0 1460 NP/NS/NT/NZ• 412 2 200 10.4 9.0 1460 NP/NS/NT/NZ• 412 2 200 8.8 7.5 1460 NP/NS/NT/NZ




LT 239 257 326 327LT, 6-pole 298 361 417 386MT 203 232 272 256HT 189 209 235 232

NP/NS/NT/NZ


P1 P2

• 620 2 250 10.5 9.0 955 NP/NS/NT/NZ• 621 2 250 10.5 9.0 955 NP/NS/NT/NZ• 622 2 250 10.5 9.0 955 NP/NS/NT/NZ• 623 2 250 10.5 9.0 955 NP/NS/NT/NZ• 624 2 250 10.5 9.0 955 NP/NS/NT/NZ• 625 2 250 10.5 9.0 955 NP/NS/NT/NZ

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 140 1600

2

4

6

8

10

12

14

16

18

6

8

10

12

LT

410

410

411

411

412

412

413

413

414

414

Q [l/s]

H [m]

2P [kW]

0 40 80 120 160 2000

1

2

3

4

5

6

7

8

9

4

6

8

10

LT

620

620

621

621

622

622

623

623

624

624

625

625


77

N 3153

NP/NS/NT/NZ


P1 P2

• W450 2 100 12.7 11.0 1460 NP/NS/NT/NZ• W451 2 100 12.7 11.0 1460 NP/NS/NT/NZ• W453 2 100 12.7 11.0 1460 NP/NS/NT/NZ• W454 2 100 12.7 11.0 1460 NP/NS/NT/NZ• 454 2 100 10.4 9.0 1460 NP/NS/NT/NZ



NP/NS/NT/NZ


P1 P2

• W430 2 150 12.7 11.0 1460 NP/NS/NT/NZ• W431 2 150 12.7 11.0 1460 NP/NS/NT/NZ• 431 2 150 10.4 9.0 1460 NP/NS/NT/NZ




Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

5

10

15

20

25

0

4

8

12

16

MT

430

430

431

431

432

432

433

433

434

434

435

435

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 700

5

10

15

20

25

30

0

5

10

15

HT

450

450

451

451

453

453

454

454

455

455

456

456


78

N 3170

Weight, kg NP NS

MT 522 542

NP/NS


P1 P2

• 430 2 150 25 22 1460 NP/NS• 431 2 150 25 22 1460 NP/NS• 432 2 150 25 22 1460 NP/NS

NP/NS


P1 P2

• 635 2 150 17.5 15 1460 NP/NS• 636 2 150 17.5 15 1460 NP/NS• 637 2 150 17.5 15 1460 NP/NS

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 1400

5

10

15

20

25

12

16

20

24

MT

430

430

431

431

432

432

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

4

8

12

16

20

8

10

12

14

16

MT

635

635

636

636

637

637


79

N 3171

NP/NS/NT/NZ


P1 P2

• W451 2 100 21.0 18.5 1460 NP/NS/NT/NZ• W452 2 100 21.0 18.5 1460 NP/NS/NT/NZ• W453 2 100 21.0 18.5 1460 NP/NS/NT/NZ• 453 2 100 17.2 15.0 1460 NP/NS/NT/NZ


NP/NS/NT/NZ


P1 P2

• W431 2 150 21.0 18.5 1460 NP/NS/NT/NZ• W432 2 150 21.0 18.5 1460 NP/NS/NT/NZ• W433 2 150 21.0 18.5 1460 NP/NS/NT/NZ• 433 2 150 17.2 15.0 1460 NP/NS/NT/NZ


Weight, kg NP NS NT

MT 312 345 399HT 290 310 359

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 1400

5

10

15

20

25

30

10

15

20

MT

431

431

432

432

433

433

434

434

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 800

5

10

15

20

25

30

35

40

10

15

20

25

HT

451

451

452

452

453

453

454

454


80

N 3201


MT 570 598 635 635


P1 P2

• 444 2 200 34 30 1455 NP/NS/NT/NZ• 445 2 200 34 30 1455 NP/NS/NT/NZ• 446 2 200 34 30 1455 NP/NS/NT/NZ• 446 2 200 25 22 1460 NP/NS/NT/NZ• 447 2 200 34 30 1455 NP/NS/NT/NZ• 447 2 200 25 22 1460 NP/NS/NT/NZ

NP/NS/NT/NZ


P1 P2

• W640 2 200 25 22 1460 NP/NS/NT/NZ• W641 2 200 25 22 1460 NP/NS/NT/NZ• W642 2 200 25 22 1460 NP/NS/NT/NZ

NP/NS/NT/NZ

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 2500

5

10

15

20

25

30

15

20

25

30

MT

444

445

444

445

446

446

447

447

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 140 160 1800

4

8

12

16

20

10

12

14

16

18

20

MT

640

640

641

641

642

642


81


LT 1065 1180 1313 1313MT 1092 1207 1340 1340


P1 P2


NP/NS/NT/NZ

NP/NS/NT/NZ


P1 P2


N 3300

Q [l/s]

H [m]

2P [kW]

0 100 200 300 400 5000

5

10

15

20

25

25

30

35

40

45

LT

621

621

622

622

623

623

624

624

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 300 3500

5

10

15

20

25

25

30

35

40

45

MT

670

670

671

671

672

672

673

673


82

PP 4600PROPELLER-PUMPS • 50 HZ

The 4600 propeller pump is designedfor applications requiringvery large capacityat ultra low head.

0 200 400 600 800 1000 1200 1400 (l/s)0.0

0.4

0.8

1.2

1.6

2.0

2.4(m)H

Q

4680

4670

46404630

4660

4650

83

PP 46303-phase

Max. power, input 2.1 kWRated power, output 1.5 kWSpeed 750* r/minWeight 77 kg

PP 46403-phase

Max. power, input 3.4 kWRated power, output 2.5 kWSpeed 705* r/minWeight 83 kg

* 400 V

0 50 100 150 200 250 300 (l/s)0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

(m)H

Q

0 50 100 150 200 250 300 350 (l/s)0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

1.1

(m)H

Q

84

PP 46503-phase

Max. power, input 6.9 kWRated power, output 5 kWSpeed 480* r/minWeight 196 kg

PP 46603-phase

Max. power, input 13.4kWRated power, output 10 kWSpeed 475* r/minWeight 242 kg

* 400 V

0 100 200 300 400 500 600 700 800 900 [l/s]0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

[m]

H

Q

0 100 200 300 400 500 600 700 800 900 1000[l/s]0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

[m]

H

Q

85

PP 46803-phase

Max. power, input 32 kWRated power, output 25 kWSpeed 360* r/minWeight 516 kg

PP 46703-phase

Max. power, input 17.1 kWRated power, output 13 kWSpeed 360* r/minWeight 395 kg

* 400 V

0 200 400 600 800 1000 1200 (l/s)0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8(m)

H

Q

0 200 400 600 800 1000 1200 1400 1600 (l/s)0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

(m)

H

Q

86

PROPELLER-PUMPS • 50 HZ

The propeller is dynamically balanced forminimum vibration and maximum life ofseals and bearings.Its new, hydrodynamic,conical design affordsmore efficient pumping.Moreover, the propeller’sswept-back blades(for low-clogging performance) arenumerically machined to match the pump’sspecified duty point.

200 500 1000 2000 5000

2

5

10

20

Ql/s

m

7050 712171017081

7061

7115707670557045

3127

H

3140

3152

87

P 3127

Curve Overall diam. Motor rating, kW rpm Maxcode mm P1 P2 weight

diff. ring kg494 ∅ 490 9.1 7.5 1435 182

P 3140


diff. ring kg407 ∅ 575 13.3 11 1440 270

PL

PL

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 2500.0

0.5

1.0

1.5

2.0

2.5

3.0

5

6

7

8

9

10

LT

494

494

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 3000.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

6

8

10

12

14

LT

407

407

88

P 7045

Curve Overall diam. Motor rating, kW rpm Overall Maxcode mm P1 P2 height weight

diff. ring mm kg965 655 20-26 17-22 965 1425 420720 655 13.3 11 720 1425 420

PL

P 3152


diff. ring kg407 ∅ 575 18.4 15.5 1440 273

PL

Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 300 3500.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

8

10

12

14

16

18

LT

407

407

0.30 0.35 0.40 0.45 0.50 0.55

0

0.5

0.25

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

0.20

965

720

H [m]

Q [m3/s]

89

P 7055


diff. ring mm kg725 755 20-42 17-37 725 1700 630575 755 16-20 13-17 575 1700 630

PL

P 7050


diff. ring mm kg970 655 52-64 45-55 970 1735 750725 655 31-42 27-37 725 1735 750

PL

0.3 0.4 0.5 0.6 0.7 1.0

0

1

2

3

4

5

6

7

8

9

0.2 0.8 0.9

725

970

H [m]

Q [m3/s]

0.3 0.4 0.5 0.6 0.7 0.8

0

0.4

0.2

0.8

1.2

1.6

2.0

2.4

2.8

3.2

3.6

4.0

4.4

4.8

575

725

H [m]

Q [m3/s]

90

P 7076


diff. ring mm kg580 920 43-61 37-55 580 2315 1250

PL

P 7061


diff. ring mm kg990 770 64-173 58-160 990 2370 1350735 770 51-61 46-55 735 2370 1350

PL

0.6 0.8 1.0 1.2 1.4

0

1

2

3

4

5

6

7

8

9

0.4

735

990

H [m]

Q [m3/s]

0

600 800 1000 1200 1400

0.4

0.8

1.2

1.6

2.0

2.4

2.8

3.2

3.6

4.0

580

H [m]

Q [l/s]

91

P 7101


diff. ring mm kg740 1170 246-320 230-300 740 3050 3300590 1170 111-247 100-230 590 3050 3300495 1170 167-174 160-160 495 3050 3300420 1170 46-99 40-90 420 3050 3300

PL

P 7081


diff. ring mm kg990 965 173-214 160-200 990 2675 1950735 965 161-155 155-140 735 2675 1950

PL

2200

0

1

2

3

4

5

6

7

8

9

10

11

12

600 1000 1400 1800800 1200 1600 2000

990

735

13

H [m]

Q [l/s]

1.5 2.0 2.5 3.0 3.5 4.0

0

1

2

3

4

5

6

7

8

9

10

11

12

1.0

740

590

495

420

H [m]

Q [m3/s]

92

P 7121


diff. ring mm kg595 1370 385-484 365-460 595 3410 5200495 1370 217-435 200-410 495 3410 5200425 1370 140-267 125-250 425 3410 5200

PL

P 7115


diff. ring mm kg490 1360 174-241 160-225 490 3530 4500420 1360 199-167 190-150 490 3530 4500

PL

2400

0

1

2

3

4

5

2800 3200 3600 4000 4400

6

2000

490

420

H [m]

Q [l/s]

2.0 3.0 5.04.0

0

1

2

3

4

5

6

7

8

9

10

11

12

1.0 6.0

425

495

595

H [m]

Q [m3/s]

93

B-PUMPS • 50 HZIN BRONZE AND STAINLESS STEEL

2060Stainless steel

BSWeight, kg 32

Impeller Outlet dia Through- Motor rpm Availablecode mm BS vers. let, mm rating kW versions231 62 8 2.2 2800 BS232 62 8 2.2 2800 BS

3085Stainless steel

BP BSWeight, kg 58 58

2075Bronze

BSWeight, kg 85

Impeller Outlet dia Through- Motor rpm Availablecode mm BS vers. let, mm rating kW versions233 75 8 3.7 2800 BS231 100 8 3.7 2800 BS

BSWeight, kg 460

Impeller Outlet dia Through- Motor rpm Availablecode mm BS vers. let, mm rating kW versions253 100 10 37 2920 BS

2201Bronze

Impeller No. of Outlet dia Through- Motor rpm Availablecode channels mm BP vers. let, mm rating kW versions

P1 P2

250 3 50 10 3.0 2.4 2830 BP/BS252 3 50 10 3.0 2.4 2830 BP/BS254 3 50 10 3.0 2.4 2830 BP/BS

Q (l/s)

H (m)

0 2 4 6 8 10 12 14 160

2

4

6

8

10

12

14

16

18

231232

MT

Q (l/s)

H (m)

0 10 20 30 40 50 600

10

20

30

40

50

60

70

80

90

253

HT

Q (l/s)

H (m)

0 1 2 3 4 5 6 7 8 90

5

10

15

20

25

30

35

250

252254

HT

Q (l/s)

H (m)

0 4 8 12 16 200

10

20

30

40

50

60

70

271

233 231

ST

HT

MT

94

C-PUMPS • 50 HZIN STAINLESS STEEL

C 3060Stainless steel

CP/CT/CS

CP CT CSWeight, kg 41 45 41(with cooling jacket) 41 45 41


P1 P2

221 2 80 15 x 15 3.3 2.4 2800 CP/CT/CS222 2 80 15 x 15 3.3 2.4 2800 CP/CT/CS250 2 80 15 x 15 3.3 2.4 2800 CP/CS252 2 80 15 x 15 3.3 2.4 2800 CP/CS

Q [l/s]

Head [m]

P2 [kW]

0 2 4 6 8 10 12 14 160

5

10

15

20

25

30

35

40

0

1

2

3

252

252

250

250

221

221

222

222

95


CP/CS

Weight, kg CP CS

MT 72 72

Impeller No. of Outlet dia Through- Motor rpm Availablecode channels mm CP vers. let, mm rating kW versions

P1 P2

432 * 1 80 ∅ 73 2.7 2.0 1395 CP/CS434 * 1 80 ∅ 73 2.7 2.0 1395 CP/CS436 * 1 80 ∅ 73 2.7 2.0 1395 CP/CS

* NEVACLOG

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 25 30 350

2

4

6

8

10

1.0

1.5

2.0

2.5

MT

432

432

434

434

436

436

96


CP/CS/CT/CZ

Weight, kg CP CS CT CZHT 156 162 185 255MT 164 168 215 263


P1 P2

W430 1 100 100 x 110 8.0 6.7 1440 CP/CS/CT/CZW432 1 100 187 x 100 8.0 6.7 1440 CP/CS/CT/CZW432 1 100 187 x 100 6.5 5.3 1435 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

W250 1 80 ∅ 58 9.5 8.0 2890 CP/CS/CT/CZW252 1 80 ∅ 58 9.5 8.0 2890 CP/CS/CT/CZW461 1 100 ∅ 76 8.0 6.7 1440 CP/CS/CT/CZW461 1 100 ∅ 76 6.5 5.3 1435 CP/CS/CT/CZW462 1 100 ∅ 76 8.0 6.7 1440 CP/CS/CT/CZW462 1 100 ∅ 76 6.5 5.3 1435 CP/CS/CT/CZW467 1 100 ∅ 76 8.0 6.7 1440 CP/CS/CT/CZ

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 50 60 70 800

4

8

12

16

20

4

5

6

7

MT

430

430

432

432

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

5

10

15

20

25

30

35

4

6

8

HT

250

250

252

252

461

461

462

462

467

467

97

CP/CS/CT/CZ


P1 P2

W635 2 250 102 x 84 25 22 970 CP/CS/CT/CZW636 2 250 102 x 84 25 22 970 CP/CS/CT/CZW637 2 250 102 x 84 25 22 970 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

W452 1 200 77 x 77 34 30 1455 CP/CS/CT/CZ452 1 200 77 x 77 25 22 1460 CP/CS/CT/CZ456 1 200 ∅ 100 34 30 1455 CP/CS/CT/CZ460 3 200 59 x 65 34 30 1455 CP/CS/CT/CZ

W462 3 200 59 x 65 34 30 1455 CP/CS/CT/CZ462 3 200 59 x 65 25 22 1460 CP/CS/CT/CZ


Q [l/s]

H [m]

2P [kW]

0 40 80 120 160 2000

4

8

12

16

20

8

12

16

20

MT

635

635

636

636

637

637

Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 1200

5

10

15

20

25

30

35

40

10

15

20

25

30

HT

452

452

456

456

460

460

462

462


98

CP/CS/CT/CZ


P1 P2

641 2 300 100 x 100 50 44 975 CP/CS/CT/CZ642 2 300 100 x 100 50 44 975 CP/CS/CT/CZ644 2 300 100 x 100 50 44 975 CP/CS/CT/CZ646 2 300 100 x 100 50 44 975 CP/CS/CT/CZ648 2 300 100 x 100 50 44 975 CP/CS/CT/CZ

CP/CS/CT/CZ


P1 P2

460 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ460 2 200 76 x 76 45 40 1475 CP/CS/CT/CZ461 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ462 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ463 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ464 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ465 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ466 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ466 2 200 76 x 76 45 40 1475 CP/CS/CT/CZ467 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ467 2 200 76 x 76 45 40 1475 CP/CS/CT/CZ468 2 200 76 x 76 59 54 1475 CP/CS/CT/CZ


Q [l/s]

H [m]

2P [kW]

0 50 100 150 200 250 3000

5

10

15

20

25

20

30

40

MT

641

641

642

642

644

644

646

646

648

648


Q [l/s]

H [m]

2P [kW]

0 20 40 60 80 100 120 1400

10

20

30

40

50

60

0

20

40

60

HT

460

460

461

461

462

462

463

463

464

464

465

465

466

466

467

467

468

468

99

D-PUMPS • 50 HZIN BRONZE AND STAINLESS STEEL

D 3060Stainless steel

DP/DT/DS

Pump type DP DS DTWeight, kg 41 41 45


P1 P2

272 75 15 x 15 3.3 2.4 2800 DP/DT/DS274 75 15 x 15 3.3 2.4 2800 DP/DT/DS

Q (l/s)

H (m)

P2 (kW)

0 2 4 6 8 100

2

4

6

8

10

12

0.0

0.5

1.0

1.5

2.0

2.5

3.0272

274

272274

LT

100

D 3080Bronze

DS

DSWeight, kg 105


P1 P2

263 75 25 7.3 5.5 2800 DS234 75 40 7.3 5.5 2800 DS431 100 75 5.0 4.0 1400 DS


DP/DS

DP DSWeight, kg 68 68


P1 P2

470 80 65 2.7 2.0 1395 DP/DS473 80 65 2.7 2.0 1395 DP/DS476 80 65 2.7 2.0 1395 DP/DS

Q (l/s)

H (m)

P2 (kW)

0 5 10 15 20 250

5

10

15

20

25

30

35

0

1

2

3

4

5

6263 234

431

263

234

431

MT HT ST

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

2

4

6

8

10

1.0

1.5

2.0

2.5

MT

470

470

473

473

476

476

101

DP/DS/DT/DZ


P1 P2

W475 100 52 8.0 6.7 1440 DP/DS/DT/DZW476 100 52 8.0 6.7 1440 DP/DS/DT/DZW478 100 52 8.0 6.7 1440 DP/DS/DT/DZW478 100 52 6.5 5.3 1435 DP/DS/DT/DZW479 100 52 8.0 6.7 1440 DP/DS/DT/DZW479 100 52 6.5 5.3 1435 DP/DS/DT/DZ

Weight, kg DP DS DT DZHT 154 161 - -MT 165 165 214 214

DP/DS


P1 P2

W287 75 50 9.5 8.0 2890 DP/DS

Q [l/s]

H [m]

2P [kW]

0 10 20 30 40 500

2

4

6

8

10

12

14

3

4

5

6

7

MT

475

475

476

476

478

478

479

479

Q [l/s]

H [m]

2P [kW]

0 5 10 15 20 250

5

10

15

20

25

4

5

6

7

8

9

HT

287

287


102

EXPLOSION PROOF PUMPS AND MIXERS

Many of the Flygt pumps are available in Explosion-Proof execution and variousapprovals apply. Below is given the classification of the different approvals in accordancewith the European norms and the explanation of the letter coding.

E EXd e IIB T4* II G2E EXd e IIB T3* II G2E EXd e I* II M2

E = European norm EN 50014EXd = Explosionproof encapsulation permitted in Zone 1 and 2. EN 50018.

e = Increased safety. EN 50019.I = Gas group (Methane), cool minesIIB = Gas group (Ethylene), industry

T4 = Temp. class. Max. surf.temp. = 135° C.T3 = Temp. class. Max. surf. temp. = 200° C.

Approval No. ............. The thermocontacts in the equipment must be connected.II G2 and I M2 = Equipment groups and categories acc. to EC-Directive 94/9/EC.

Classification of hazardous areasHazardous locations are those in which flammablematerials are likely to be present or introduced inconcentrations, which can be ignited through normalor abnormal equipment operation. Equipment mustgenerally be approved for these locations.Hazardous areas are classified into zones accordingto the IEC 79-10. Most of the European countrieshave standards or norms which conform with thisrecommendation.Due to the temporary and local probability of thepresence of an explosive atmosphere, the hazardousareas are divided into zones as follows:

Zone 0: Area in which an explosive atmosphere iscontinuously present for long periods.

Zone 1: Areas in which an explosive atmosphereis likely to occur in normal operation.

Zone 2: Areas in which an explosive atmosphereis not likely to occur in normal operationand, if it occurs, it will only exist for ashort time.

Flygt guarantees the pumps to be in compliance withthe above mentioned approvals when beingdelivered.

It is the responsibility of the owner to make sure thatthe equipment is used in accordance with theapproval and in applications for which it is intended.Special attention should be paid to the connection ofsafety devices such as thermocontacts and theearthing systems.

All modification and repair work must be per-formed in accordance with the original approvaland by using only genuine Flygt parts.

The degree of protection for all Flygt designedand constructed submersible equipment isIP68, 20m.

The following pump-types and mixersare avilable in EX-proof execution:

3000-pumps 2000-pumps Mixers

3057 2075 43523067 2125 44003068 2135 44103085 2201 44303102 2400 46103127 3067 46203140 3080 46303152 46403153 46503170 46603171 46703201 468033003231330633123351335634003501353136023800

* Please refer to the Care and Maintenance Manual for more detailed information.

DIMENSIONSAll drawings are available as Acrobat documents (.pdf) and AutoCad drawings (.dwg).Please contact your ITT Flygt representative for more information.All dimensions are in mm.

104

�� !�"#��$�%��&� �'

(((�)��*

cspower.com.my€¦ · 263 1 100 Ø 76 34 30 2930 CP/CT/CS 264 1 100 Ø 76 34 30 2930 CP/CT/CS 265...

Documents

Transcript of cspower.com.my€¦ · 263 1 100 Ø 76 34 30 2930 CP/CT/CS 264 1 100 Ø 76 34 30 2930 CP/CT/CS 265...