© 2002 Eaton Corporation. All rights reserved.

PowerwareP13 and P14 UPS

950 Watts /1400 VA

120 and 230 Vac models

p13pres.ppt rev 02/21/06

2

Agenda

Features and Benefits Applications Product Features Overview Software Out-of-Box Usability Collaterals

3

P13 and P14 Product Snapshot P13 P14

IBM Feature Code 9910-P13 9910-P14

IBM Part Number 39J2532 39J4810*

Topology Line-interactive Line-interactive

Power Rating 950 Watts/1400 VA 950 Watts/1400 VA

Voltage 120 Vac 220-240 Vac

Frequency 50/60 Hz 50/60 Hz

Configuration Tower Tower

Dimensions (HxWxD) 7.6 x 5.9 x 15.4 in 7.6 x 5.9 x 15.4 in

Weight 37.0 lbs 37.0 lbs

Input Connection 5-15P IEC-320-C14

Output Connection (6) 5-15R (6) IEC-320-C13

Battery Runtime (half/full) 14/5 min 14/5 min

Color Black Black

*RoHS compliant part number. Old IBM part number is 39J2533.

4

P13 and P14 Features and Benefits

• Cost-effective power protection for entry to mid-level servers

• Eliminates unwanted power quality surprises with Buck and Boost voltage regulation

• Single SKU supports i5-iSeries and p5-pSeries, OpenPower with both serial and relay cables included with UPS

• Minimizes downtime with hot-swappable batteries

• Tested and approved by IBM to assure out-of-box usability

• Includes premium IBM warranty which uniquely covers batteries, too

5

P13 and P14 Applications

Cost-effective, entry-level power protection for:

• i5 and iSeries servers

• p5 and pSeries

• OpenPower servers

6

Application Matrix

ExpectedIBM Server Watts Vac P13 P14 Runtime

i5-iSeries

9406-520, 9405-520 600 100-127 10

9406-520, 9405-520 600 200-240 10

p5-pSeries and OpenPower

9111-520 600 100-127 10

9111-520 600 200-240 10

7028-6E4 p630 750 100-127 7

7028-6E4 p630 750 200-240 7

7029-6E3 p615 450 100-127 16

7029-6E3 P615 450 200-240 16

7

Series 5 Power ProtectionThe Powerware 5115 delivers power protection from power problems that threaten your equipment and priceless data

Power Failures

Power sags

Power surges

Brownouts

Overvoltage

The Powerware 5115 also offers varying degrees of protection against other power problems as well

8

Advanced Battery Management(ABM®) Technology

• Increases battery service life by charging only when needed

• Optimizes recharge time

• Does not trickle charge & starve the electrolyte

• Microprocessor controlled – only true and automatic battery check (periodic, controlled discharge) for accurate advanced battery failure protection

• Sleep features – no unnecessary battery drain

9

Buck and Boost Voltage Regulation

• Wide input voltage window: regulates voltage fluctuations

• Regulated output voltage: prevents voltage fluctuations from reaching connected load

Nominal Voltage+6%

-10%

+20%

-20%

Input Voltage to UPS Output Voltage to Load

10

Sine Wave Output

When the UPS switches to battery power, it provides smooth sine wave output to the connected load

11

Hot-swappable Batteries

Extends the service life of the UPS by allowing the user to replace batteries without shutting down the connected load

12

Battery Runtime (in minutes)

Watts VA Runtime

128 200 58

192 300 41

320 500 28

402 600 19

503 750 14

603 900 10

670 1000 8

804 1200 6

938 1400 5

13

Simple, User-friendly Interface

On/Off Power

Alarm Silence/Self-Test

UPS Power On

UPS On Battery

Overload

Service Indicator

Start-On-Battery: Power up UPS in

absence of utility power

14

P13 Rear Panel

Network Transient Protector

DIP Switches

6-foot Line Cord w/5-15P

Input Overcurrent Protector

(6) 5-15R

Site Wiring Fault

USB Port

Serial Port

15

P14 Rear Panel

Input Overcurrent Protector

Network Transient Protector

DIP Switches

IEC-320 Input Connector

IEC-320, 10A Receptacles1

USB Port

Serial Port

1 P14 includes three (3) IEC-320-C13 to IEC-320-C14 1.8 m power cords

16

Site Wiring Fault Indicator (P13 model)

UPS verifies that the wall socket to which it is connected is properly wired

Red light illuminates to indicate a problem with the wall socket; either the ground wire connectiondoes not exist or the line and neutral wires are reversed

17

Nominal Voltage Selection: DIP Switches

Select 110 or 120V (default) for P13

Select 220, 230 (default), or 240V for P14

Select nominal voltage by setting DIP switches

18

The P13 offers protection from disturbances that travel through the network (RJ45) and phone lines (RJ11)

Network Transient Protector

19

USB and Serial Communication

UPS is equipped with both USB and serial communication ports (cables for both are included)

Serial Port

USB Port

Single SKU supports i5-iSeries and p5-pSeries systems

20

Powerware Software Suite

The Powerware 5115 includes the exclusive Software Suite CD, incorporating the best power technology with all the control software you need for effective network monitoring and analysis, power management, SNMP and UPS remote shutdown. Software Suite Contents• LanSafe • CheckUPS Basic • Advanced NetWatch • PowerVision (30-day trial version)

Software Installation Wizard• Takes the guesswork out of UPS

software installation • Selects the right software for your system • Links available for new downloads

21

LanSafe PowerScope View

• PowerScope view provides a crisp, real-time animation of the power flow through the UPS components

• Vital status and metering information is intuitively available at-a-glance

• The UPS component topology is automatically detected (line-interactive for P13 and P14)

22

PowerScope View Elements

Input Voltage Meter Output Voltage Meter

Animated UPS topology display

Battery Run time

Amount of time the UPS can operate on battery

power

Load %

The percent of maximum output load the UPS supports. The number increases when new devices are plugged into the

UPS

Advanced Battery Management (ABM)

animated status indicator

Doubles battery life by charging only when necessary

Toolbar ButtonsQuick-launch most common tasks

LanSafe Controller name, location and UPS model

Active Events Log

23

Why Use LanSafe Software?

1. Prevent system crashes When a power failure outlasts the UPS battery run time, LanSafe automatically performs a graceful operating system shutdown.

2. Avoid data loss LanSafe saves all unsaved work-in-progress.

3. Protect valuable applications LanSafe protects applications from becoming corrupt by closing them in an orderly fashion.

4. Stay informed Monitor and receive UPS alarms via network broadcasts, SNMP, email, pager or mobile phone.

5. Control the power Manage all UPSs on the network, turn them on and off, check battery health, create sequential shutdown scenarios, integrate UPSs into SNMP Network Management Systems.

24

Powerware Extensions Software for IBM Director Seamless UPS and software

integration into IBM Director Network Management System (NMS)

Real time monitoring, management and alarm notification of all UPSs in the network: e.g. battery status, battery replacement, load level and metering information

Automatically launches LanSafe and ConnectUPS Web/SNMP Card applications from within Director

Available on Powerware web

FREE-OF-CHARGE

25

P13 and P14 Out-of-Box Usability

9910 philosophy of a complete package UPS, power1 & communication cables, software, mounting

hardware and manuals

1 P14 includes three (3) IEC-320-C13 toIEC-320-C14 1.8 m power cords

26

P13 and P14 Collateral

Additional information available at

www.powerware.com/ibm Select your region. Click “Products”, click “9910 Solutions”

then click “Powerware pSeries” or “Powerware iSeries”

Materials available Data sheet Application overview chart Product presentation Documents (manuals) Communication Options for IBM Applications