Cylindrical gears modeling using CATIA software
New wear resistant Al based materials and their application in automotive industry
The structure and mechanical properties of an aluminium A356 alloy base composite with Al2O3 particle additions
Corrosion behaviour of the as-cast and heat-treated ZA27 alloy
Tribological behaviour of Al-based MMCs and their application in automotive industry
Tribological properties of A356 Al-Si alloy base composite reinforced with Al2O3 particles (MMC)
Ferrous-based coatings for engine cylinder bores made of aluminium alloys: Tribological properties
The influence of strontium addition on the tribological properties of Zn25Al3Si alloy in boundary lubricated condition
Influence of additives and selective transfer on wear reduction in the lubricated contact
Influence of “Valena” metal-plating additive on the friction properties of ball bearings
The influence of corrosion on the microstructure of thermally treated ZA27/SiCp composites
A review of the tribological properties of PTFE composites filled with glass, graphite, carbon or bronze reinforcement
Abrasive wear resistance of the iron- and WC-based hardfaced coatings evaluated with scratch test method
Performance investigation of chain saw lubricants based on new sunflower oil (NSO)
Characterization and comparison of the carbides morphologies in the near surface region of the single- and double layer iron-based hardfaced coatings
Microstructure and mechanical properties of the Mo-NiCrBSi coating deposited by atmospheric plasma spraying
Tribological properties of thixocasted and heat treated hypoeutectic Al-Si alloy A356
Friction and wear processes – Thermodynamic approach
Ecological and technical aspects of the waste oils influence on environment
Friction and wear properties of copper-based composites reinforced with micro- and nano-sized Al2O3 particles