Post on 03-Feb-2022
3
Your Satisfaction Is Our Goal
For more than 70 years BUEHLER has remained the world leader in developing and supplying quality products to the Material Scientist. Each product is developed with the highest quality standards and inspected to assure consistency.BUEHLER provides a wide range of products and services in support of microstructural analysis within manufacturing, service sectors and academia. Customers engaged in the preparation, examination and analysis of materials, will see the benefi ts of product availability and customer services from Buehler.Buehler products fall into three broad categories:Sample preparation equipment for cutting, thin sectioning, grinding and polishing specimen material, prior to microstructural inspection; testing equipment, including optical microspcopes, image analysers and hardness testers, related instruments and consumables.The wide range of equipment is designed to need the demands of diverse applications and is backed by the resources and experience of product specialists, laboratory technicians and engineers who are responsible for technical support, confi guring, calibration testing, commissioning and on-site fi eld servicing.The organisation is dedicated to all aspects of materials science, as well as being totally committed to quality, through registration to ISO 9001.
Educational Program and Vocational Training
Buehler customer support extends to education, where an internati-onal reputation has been built for vocational training. Product-specifi c seminars provide an invaluable introduction to theory and practice and a more in-depth presentation to users and decision makers.Buehler Ltd and its subsidiary offi ces throughout the world are invol-ved in technical society meetings, seminars, and trade shows. We also work with various Standards societies and other industry bo-dies. Topics of Buehlers Courses include Metallographic Techniques, Introduction to Digital Imaging, Image Analysis, Printed Wiring Boards & Electronic Devices. Customized courses can also be held at your facility. For a detailled program visit www.buehler.com or contact your local dealer.
Buehler Headquarters for Europe and Middle East in Düsseldorf, Germany
Class room at Buehler in Germany
BUEHLER GMBHREGISTERED TO
ISO 9001CERTIFICATE 207017
4
Visit our website at www.buehler.comfor new products, activities and latest news.
Join the Buehler e-Clubto access valuable technical informationand material solutions.
5
BUEHLER Worldwide Sales Offi ces
HEADQUARTERSBUEHLER LTD. – Worldwide Headquarters41 Waukegan Road • P.O. Box 1Lake Bluff, Illinois 60044-1699 USATel: 847/295-6500 • Fax: 847/295-7979Sales: 1/800/BUEHLER • 1/800/283-4537Web Site: http://www.buehler.comE-Mail: info@buehler.com
INTERNATIONALArgentina - Buenos AiresARO S.A.Tel: (54) (11) 4331.5766 Fax: (54) (11) 4331.3572Australia - VictoriaBiolab Industrial TechnologiesTel: (61) (3) 9263.4300 Fax: (61) (3) 9562.7953Austria - Wolfsgraben Ing. Andreas GrimasTel: (43) 2233.78610 Fax: (43) 2233.78619Bahrainplease contact Buehler GmbH in GermanyBangladesh - DhakaA.Q. Chowdhury & Co. (Pvt.) LtdTel: (880) (2) 966.9288 Fax: (880) (2) 885.4428Belgium - NamurAnalis S.A.Tel: (32) (81) 22.50.50 Fax: (32) (81)23.07.79Brazil - Sao PauloInstrumental Instrumentos de Medicao LTDATel: (55) (11) 5011.0901 Fax: (55) (11) 5012.4650Bulgaria - Sofi aET E-VITTel: (359) (2) 983 3338 Fax:(359) (2) 983 3338Canada - OntarioBUEHLER CANADA9999 Highway 48Markham, Ontario L3P 3J3Telephone: (905) 2014686 • Fax: (905) 201-4683Sales Telephone: 1-800-268-3593http://www.buehler.ca • info@buehler.ca
Chile - Vina del MarG. Busch & Cia. Ltda.Tel: (56) (32) 692.064 Fax: (56) (32) 692.064ChinaBUEHLER ASIA5/R Vogue Centre696 Castle Peak RoadLai Chi Kok, KowloonHong Kong, SAR, ChinaTelephone: (852) 2307 0909Fax: (852) 2307 0233
Buehler - BeijingTel: (86) (10) 8563.1122 Fax: (86) (10) 8561.5320Buehler - ChengDuTel: (86) (28) 662.8833 Fax: (86) (28) 662.5844Buehler - ShanghaiTel: (86) (21) 6391.2588 Fax: (86) (21) 6391.2277Buehler - WuhanTel: (86) (27) 8360.2980 Fax: (86) (27) 8360.2779Buehler - XianTel: (86) (29) 766.0608 Fax: (86) (29) 766.0603Colombia - SantaFe de BogotaArotec Colombiana S.A.Tel: (57) (1) 288.7799 Fax: (57) (1) 285.3604Costa Rica - San Jose Capris S.A.Tel: (506) 232.9111 Fax: (506) 232.8525 Croatia - ZagrebArting Zagreb d.o.o. NDTTel: (385) (1) 346.0065 Fax: (385) (1) 346.0067Czech Republic - PragueHanyko Praha S.R.O.Tel: (420) (2) 5718.7612 Fax: (420) (2) 5718.7610Egypt - CairoScientifi c Equipment Trading Institution (SETI)Tel: (20) (2) 574.9198 Fax: (20) (2) 575.5662Estonia - TallinDelatalabTel: (372) 53 994 294 Fax: (372) 620 3153Finland - Helsinki Knorring OY A.B.Tel: (358) (9) 56041 Fax: (358) (9) 565.2463
France - DardillyBUEHLER GMBHTel: 0 800 89 73 71 • FAX: 0 800 88 05 27 (Note: these no’s are only valid if dialled within France)http://www.buehler.fr • info@buehler.frGermany - DüsseldorfBUEHLER GMBH In der Steele 2 • 40599 DüsseldorfPostfach 16 03 55 • 40566 DüsseldorfTel: (+49) 0211/974100 • Fax: (+49) 0211/9741079http://www.buehler-met.de • info@buehler-met.deGreece - KoropiB. Caravitis S.A.Tel: (30) (210) 602.8317 Fax: (30) (210) 664.4886Hungary - BudapestGrimas Handelgesellschaft mbHTel: (36) (1) 420.5883 Fax: (36) (1) 276.0557India - AgraCensico International Private, Ltd. Tel: (91) (562) 2524777 Fax: (91) (562) 2520222Iran - TeheranAB Sangari & Sons Tel: (91) (562) 2524777 Fax: (91) (562) 2520222Ireland - DublinLabquip Ltd.Tel: (98) (21) 89647706 Fax: (98) (21) 8959369Israel - GivataimMicrotechTel: (972) (3) 573.1122 Fax: (972) (3) 573.1123Italy – FirenzeNikon Instruments, S.p.a.Tel: (39) 055.300920 Fax: (39) 005.300993Japan - TokyoSankei Co. Ltd., TokyoTel: (81) (3) 5805.0515 Fax: (81) (3) 5805.0525 Sankei Co. Ltd., OsakaTel: (81) (6) 6327.3850 Fax: (81) (6) 6327.1993Sankei Co. Ltd., Shizuoka Pref.Tel: (81) (54) 287.6722 Fax: (81) (54) 287.6907Sankei Co. Ltd., TsukubaTel: (81) (298) 52.3061 Fax: (81) (298) 52.3063Sankei Co. Ltd., YokohamaTel: (81) (467) 41.1221 Fax: (81) (467) 48.3610Jordan - AmmanSMS Scientifi c & Medical Supplies Co. Tel: (962) (6) 462.4907 Fax: (962) (6) 462.8258LebanonW.P. KatulTel: (961) 1.805.979 Fax: (961) 1.866.347Lithuania and Baltics - VilniusUAB AmtestTel: (370) (5) 238.8272 Fax: (370) (5) 238.8271Malaysia - Selangor Darul EhsanCLMO Technology SDN. BHD.Tel: (60) (3) 8942.1238 Fax: (60) (3) 8948.1661Kuwait - SafatAl-Essa Medical & Scientifi c Equipment Co. W.L.L.Tel: (965) 4834510 Fax: (965) 4840629Malta - MarsaAttard & Co., Ltd.Tel: (356) (21) 237555 Fax: (356) (21) 220186Mexico - Mexico D.F.Microanalisis S.A. de C.V.Tel: (52) (55) 5660.9828 Fax: (52) (55) 5660.9831Morocco - CasablancaEstablissements BoyerTel: (212) 227.1571 Fax: (212) 226.1149Netherlandsplease contact Buehler GmbH in GermanyNew Zealand - Auckland Biolab Ltd.Tel: (64) (9) 980.6700 Fax: (64) (9) 980.6788Norway - OsloMicronova ASTel: (47) 69241230 Fax: (47) 69241229Oman, Sultanate of - OmanBusiness International Group LLCTel: (968) 771.4752 Fax: (968) 771.3924Pakistan – KarachiFaco TradingTel: (92) (21) 452.3096 Fax: (92) (21) 452.6898
Peru - LimaCimatec S.A.Tel: (51) (1) 336.5151 Fax: (51) (1) 336.5279Philippines - ManilaEdward Keller (Philippines) Inc.Tel: (63) (2) 864.1600 Fax: (63) (2) 864.1698Poland - KatowiceTesting Tel: (48) (32) 757.4597 Fax: (48) (32) 757.4815Portugal - Linda-a-VelhaGravimeta LdaTel: (351) (22) 618 42 32 Fax: (351) (22) 618 46 19Qatar - DohaAL-Obeidly Trading Technology Tel: (974) 469.4111 Fax: (974) 469.4449Romania - BucarestTotal Control S.R.L.Tel: (40) (21) 619.3054 Fax: (40) (21) 212.3151Russia - MoscowS-InstrumentsTel: (7) (495) 203 03 08 Fax: (7) (495) 203 10 67Russia - St. PetersburgRVS Company Ltd.Tel: (7) (812) 252 69 67 Fax: (7) (812) 252 01 36Russia - St. PetersburgNienschanzTel: (7) (812) 326 59 25 Fax: (7) (812) 326 58 74Saudi Arabiaplease contact Buehler GmbH in GermanySerbia & Montenegro - BelgradeTrimid POTel: (381) (11) 444.4149 Fax: (381) (11) 456870Singapore, Republic of - SingaporeMicroactive Scientifi c Pvt. Ltd.Tel: (65) 6786.3386 Fax: (65) 6786.3183Slovakia - BratislavaMITARTel: (421) (2) 6428.8474 Fax: (421) (2) 6428.8484Slowenien - KamnikTeam Trade d.o.o.Tel: (386) (1) 831.0700 Fax: (386) (1) 831.3496South Africa - JohannesburgApollo Scientifi c ccTel: (27) (11) 466.7666 Fax: (27) (11) 466.7672South Korea - Kyung-KiKey One Engineering Co., Ltd.Tel: (82) (31) 706.1128 Fax: (82) (31) 706.1150Spain - LlaneraBiometa Tecnologia y Systemas, S.A.L.Tel: (34) (902) 244343 Fax: (34) (985) 269169Sweden - SundbybergMikron ABTel: (46) (8) 564.82140 Fax: (46) (8) 564.82141Switzerland - DietikonPrüfmaschinen AG PrüfagTel: (41) 44 746 30 Fax: (41) 44 746 39Taiwan - TaipeiSanpany Instruments Co. Ltd.Tel: (886) (2) 2392.3433 Fax: (886) (2) 2392.3463Thailand - BangkokJebsen & Jessen Marketing (T) Ltd.Tel: (66) (2) 714.3939 Fax: (66) (2) 714.3900Turkey - IstanbulMEGATel: (90) (216) 326.4535 Fax: (90) (216) 326.3286Ukraine - KyivICC-UkraineTel: (38) (4) 223.3259 Fax: (38) (4) 228.3405U.A.E. - DubaiLitec Supplies L.L.C.Tel: (971) (4) 269.2952 Fax: (971) (4) 269.2953 United Kingdom - CoventryBUEHLER GMBHTel: 0800 707 6273 • Fax: 0800 707 6274 (Note: these no’s are only valid if dialled within the UK)http://www.buehler.co.uk • sales@buehler.co.ukUruguay - MontevideoGustavo E. AriasTel: (598) (2) 600.3703 Fax: (598) (2) 600.3776Venezuela - CaracasDequimem C.A.Tel: (58) (212) 242.7512 Fax: (58) (212) 241.6354
BUEHLER — global support guaranteed!Our distributors and salespartnersA comprehensive network of distributors and sales partners guarantees worldwide professional support
for all your sample preparation and materials analysis needs.
WW_Offices2008_EN.indd 1 15.11.2007 10:37:29
7
Contents
Sectioning 1. Cut-off Wheels for Precision Cutters ...................................................................................... 8 1.1. Abrasive Cut-off Wheels for Precision Cutters ........................................................................ 8 1.2. Diamond Wafering Blades for Precision Cutters..................................................................... 8 1.3. IsoCut-CBN-Wafering Blades for Precision Cutters ................................................................. 9 2. Cut-off Wheels for Abrasive Cutters..................................................................................... 11 2.1. Abrasive Cut-off Wheels ...................................................................................................... 11 2.2. AcuThin Cut-off Wheels....................................................................................................... 13 2.3. Orbital Cut-off Wheels ......................................................................................................... 14 2.4. Diamond and CBN Cut-off Blades Ø 200 mm to 450 mm ..................................................... 15 2.5. Diamond Cut-off Blades for Lapro slab saw .......................................................................... 15 2.6. Sectioning Accessories ........................................................................................................ 16 2.7. Accessories for Petro-Line.................................................................................................... 16 2.8. Grinding Cups for IsoMet 5000 ............................................................................................ 16
Mounting 3. Compression Mounting ....................................................................................................... 17 3.1 Compression Mounting Compounds ................................................................................... 18 3.2. Premoulds ........................................................................................................................... 18 4. Castable (Cold) Mounting Compounds............................................................................................19 4.1. Acrylics ................................................................................................................................ 19 4.2. Epoxies ................................................................................................................................ 20 4.3. Castable (Cold) Mounting Moulds........................................................................................ 22 4.4. Filler and Contrast Materials for Cold Mounting ................................................................... 23 4.5. Accessories for Cold and Hot Mounts................................................................................... 23 4.6. Electroless Nickel for Coating............................................................................................... 23
Grinding and Polishing 5. MagnoSys and ApexMagnetic Systems ................................................................................ 24 5.1.-4. MagnoPad, MagnoMet, MagnoFix, MagnoDisc.................................................................... 25 5.5.-6. ApexB & M ........................................................................................................................... 25 5.7.-8. ApexHercules Discs.............................................................................................................. 25 5.9.-12. ApexDGD Diamond Grinding Discs ...................................................................................... 26 6. Grinding, Polishing and Lapping .......................................................................................... 29 6.1. PlanarMet Planar Grinding Disc............................................................................................ 29 6.2. ZirMet Abrasive Discs .......................................................................................................... 29 6.3. UltraPrep Diamond Grinding Discs....................................................................................... 29 6.4. BuehlerMet Silicon Carbide-Abrasive papers, CarbiMet Silicon Carbide-Papers .................... 30 6.5. Abrasive Belts, Sheets and Rolls ........................................................................................... 35 6.6. Silicon Carbide and Alumina-Abrasive Powders.................................................................... 36 7. Diamond Polishing Compounds .......................................................................................... 37 7.1. MetaDi Supreme Diamond Suspension, polycrystalline ....................................................... 37 7.2. MetaDi Supreme Diamond Suspension, polycrystalline ....................................................... 38 7.3. MetaDi Diamond Suspension, monocrystalline.................................................................... 38 7.4. MetaDi Combo Diamond Suspension plus extender, monocrystalline ................................. 38 7.5. MetaDi Diamond Suspension, monocrystalline, oil based .................................................... 38 7.6. MetaDi Diamond Paste with natural diamonds .................................................................... 39 7.7. MetaDi Supreme Diamond Paste, polycrystalline................................................................. 39 7.8. MetaDi II Diamond Paste with synthetic diamonds .............................................................. 39 7.9. Polishing Extenders.............................................................................................................. 39 8. Final Polishing Powders and Suspensions............................................................................. 40 9. Polishing Cloths ................................................................................................................... 42 10. Consumables for MiniMet.................................................................................................... 44 11. Consumables for Field Metallography.................................................................................. 45 12. Fibreoptics and Microelectronics ......................................................................................... 46 12.1. FibrMet Abrasive Discs......................................................................................................... 46 12.2. UltraPrep Diamond Grinding Films ...................................................................................... 47
Various Consumables and Accessories 13.1. Cleaning and Etching ........................................................................................................... 48 13.2. Ultrasonic Cleaning Solutions .............................................................................................. 48 13.3. Bonding Materials................................................................................................................ 49 13.4. Storage................................................................................................................................ 49 13.5. Accessories for Microscopy.................................................................................................. 49 13.6. Books and Educational Material ........................................................................................... 49
8
1. Cut-off Wheels for Precision Cutters Precision saws are commonly used in metallographic preparation to section materials that are small, delicate, friable, extremely hard, where the cut must be made as close as possible to a feature of interest, or where the cut width and material loss must be minimal. Blades for the precision saws are much thinner than the abrasive wheels and the load applied during cutting is much less.
1.1. Abrasive Cut-off Wheels with Ø12.7 mm arbor IsoMet 2000, IsoMet 4000 and 5000 etc.
AcuThin Blades, extra thin
127 x 0.48 x 12.7mm R/Al2O3 >HRC45 10-4060-010 10 94.00 127 x 0.48 x 12.7mm R/Al2O3 <HRC45 10-4061-010 10 94.00
Abrasive cut-off wheels
178 x 0.76 x 12.7mm R/Al2O3 Steel, etc. 11-4207-010 10 112.00 178 x 0.76 x 12.7mm R/SiC Non Ferrous materials 11-4217-010 10 112.00
Abrasive cut-off wheels, for soft materials, fine-grained
150 x 0.5 x 12.7mm Alumina fine grained 10 15 20 10 66.00 200 x 0.5 x 12.7mm Alumina fine grained 10 20 20 10 88.00
Abrasive cut-off wheels, for tough materials and general use, coarse-grained
150 x 1.0 x 12.7mm Alumina coarse grained 1015998E 10 87.00 200 x 1.5 x 12.7mm Alumina coarse grained 1020998E 10 146.00
1.2. Diamond Wafering Blades with Ø 12.7 mm arbor For all Precision Saws of the IsoMet-Series etc.
Standard Quality Wafering Blades for general use
60 x 0.20 x 12.7mm Diamond metal bonded 10 06 50 1 145.00 75 x 0.20 x 12.7mm Diamond metal bonded 10 07 50 1 168.00 100 x 0.35 x 12.7mm Diamond metal bonded 10 10 50 1 173.00 125 x 0.40 x 12.7mm Diamond metal bonded 10 12 50 1 218.00 150 x 0.60 x 12.7mm Diamond metal bonded 10 15 55 1 246.00
Standard Quality Wafering Blades for hard metals, tungsten carbide, glass and ceramics
100 x 0.6 x 12.7mm Diamond resin bonded 10 10 56 1 204.00 125 x 0.8 x 12.7mm Diamond resin bonded 10 12 56 1 231.00 150 x 0.8 x 12.7mm Diamond resin bonded 10 15 56 1 266.00 200 x 0.8 x 12.7mm Diamond resin bonded 10 20 56 1 309.00
High Quality Wafering Blades for aggressive general sectioning of ferrous and non-ferrous materials
127 x 0.40 x 12.7mm Series 20 HC metal bonded 11-4215 1 245.00 178 x 0.60 x 12.7mm Series 20 HC metal bonded 11-4237 1 366.00 203 x 0.90 x 12.7mm Series 20 HC metal bonded 11-4238 1 569.00
Buehler IsoMet Diamond Wafering Blades This proprietry high-tech family of blades was developed specifically to provide precise and accurate sectioning of metallographic samples. These blades utilize specially formulated grit-sized diamond particles to give accurate cuts without the mess or inconvenience of thicker conventional abrasive cut-off wheels. These blades have diamond particles bonded in a resin or metal matrix along the outside diameter of the blade. The proprietry formulation of bonded diamond particles is designed to allow the bonding to break down efficiently to ensure the most effective cutting. The thin blades (< 1 mm thick) make IsoMet blades ideal for sectioning small specimens. There is a wide selection of IsoMet blades to meet your specific needs. You can choose from 27 different blades including 6 different diameters, and high or low diamond concentration. This wide selection ensures you the right blade for fast, efficient sectioning of the most difficult materials. For fast cutting of ferrous and tough materials see our IsoCut Wafering Blades.
9
1.2. Buehler Diamond Wafering Blades with Ø 12.7 mm arbor (continued) For all Precision Saws of the IsoMet-Series etc.
High Quality Wafering Blades for routine use, metal matrix composites, PC boards, bone, titanium, thermal spray coatings
76 x 0.15 x 12.7mm Series 15 HC metal bonded 11-4243 1 175.00 102 x 0.30 x 12.7mm Series 15 HC metal bonded 11-4244 1 205.00 127 x 0.40 x 12.7mm Series 15 HC metal bonded 11-4245 1 245.00 152 x 0.50 x 12.7mm Series 15 HC metal bonded 11-4246 1 310.00 178 x 0.60 x 12.7mm Series 15 HC metal bonded 11-4247 1 366.00 203 x 0.90 x 12.7mm Series 15 HC metal bonded 11-4248 1 569.00
High Quality Wafering Blades for use with hard and brittle materials, structural ceramics, glass, electronic substrates, alumina, zirconia, concrete
76 x 0.15 x 12.7mm Series 15 LC metal bonded 11-4253 1 175.00 102 x 0.30 x 12.7mm Series 15 LC metal bonded 11-4254 1 205.00 127 x 0.40 x 12.7mm Series 15 LC metal bonded 11-4255 1 245.00 152 x 0.50 x 12.7mm Series 15 LC metal bonded 11-4276 1 310.00 178 x 0.60 x 12.7mm Series 15 LC metal bonded 11-4277 1 366.00 203 x 0.90 x 12.7mm Series 15 LC metal bonded 11-4279 1 569.00
High Quality Wafering Blades for use with medium to soft ceramics, electronic components, electronic packages, GaAs, AIN, glass fibre reinforced composites
76 x 0.15 x 12.7mm Series 10 LC metal bonded 11-4283 1 175.00 127 x 0.40 x 12.7mm Series 10 LC metal bonded 11-4285 1 245.00 178 x 0.50 x 12.7mm Series 10 LC metal bonded 11-4287 1 366.00 203 x 0.60 x 12.7mm Series 10 LC metal bonded 11-4288 1 569.00
High Quality Wafering Blades for use with hard tough materials, structural ceramics, boron nitride, silicon nitride
127 x 0.50 x 12.7mm Series 20 LC metal bonded 11-4225 1 245.00 178 x 0.60 x 12.7mm Series 20 LC metal bonded 11-4227 1 366.00 203 x 0.90 x 12.7mm Series 20 LC metal bonded 11-4228 1 569.00
High Quality Wafering Blades for use with soft friable ceramics, composites with fine reinforcing media, etc
76 x 0.15 x 12.7mm Series 5 LC metal bonded 11-4298 1 175.00 127 x 0.40 x 12.7mm Series 5 LC metal bonded 11-4295 1 245.00
High Quality Wafering Blades for use with polymers, rubber and other soft gummy materials
127 x 0.80 x 12.7mm Series 30 HC metal bonded 11-4239 1 245.00 178 x 0.80 x 12.7mm Series 30 HC metal bonded 11-4241 1 366.00 203 x 0.90 x 12.7mm Series 30 HC metal bonded 11-4242 1 569.00
1.3. IsoCut CBN-Wafering Blades with Ø 12.7 mm arbor For all Precision Saws of the IsoMet-Series etc. The IsoCut family of wafering blades was specifically developed to section ferrous materials, nickel, cobalt, lead-based alloys and super alloys. These thin blades (<1 mm thick) provide precise sectioning capability on difficult to cut samples. The special formulation of bonded cubic boron nitride on IsoCut blades can significantly reduce your sectioning time on ferrous materials compared to conventional diamond blades. For fast precision sectioning of ferrous based materials, the IsoCut Wafering Blades can significantly reduce the sectioning time for iron & nickel based alloys.
Wafering Blades for Iron, Cobalt Base Alloys, Nickel Base Alloys, Super Alloys and Lead Base Alloys
76 x 0.15 x 12.7mm Series IsoCut metal bonded 11-4263 1 168.00 102 x 0.30 x 12.7mm Series IsoCut metal bonded 11-4264 1 202.00 127 x 0.40 x 12.7mm Series IsoCut metal bonded 11-4265 1 223.00 152 x 0.50 x 12.7mm Series IsoCut metal bonded 11-4266 1 279.00 178 x 0.63 x 12.7mm Series IsoCut metal bonded 11-4267 1 329.00 203 x 0.90 x 12.7mm Series IsoCut metal bonded 11-4268 1 380.00
Sectioning accessories: Coolant, clear view paste, dressing sticks see section 2.6
Grinding cups for IsoMet 5000 see section 2.8.
SE
CT
ION
ING
10
Cut-off Wheels for Abrasive Cutters
Order-No. Type Size Application 10 23 01 10 25 01 10 30 01 10 35 01
01 RR/Al2O3
230x0.8x32 mm 254x1.0x32 mm 305x1.0x32 mm 356x1.6x32 mm
General use blade for delicate cutting, provides thin cuts
(Rubber bonded)
10 23 02 10 25 02 10 30 02 10 35 02
02 RR/Al2O3
230x1.6x32 mm 250x1.6x32 mm 300x1.6x32 mm 350x2.7x32 mm
Tool steels Carburised steels
Stainless steel (Rubber bonded, fine abrasives)
10 23 08 10 25 08 10 30 08
08 R/Al2O3
230x0.8x32 mm 250x1.6x32 mm 300x1.6x32 mm
High Speed steel Carburised steels
Stainless steel (Resin bonded, large abrasives)
102309N 102509N 103009N 103509N
09N R/Al2O3
230x1.5x32 mm 250x1.5x32 mm 300x2.0x32 mm 350x3.0x32 mm
Steel and hard materials HRC60 and above
102310N 102510N 103010N 103510N
10N R/Al2O3
230x1.5x32 mm 250x1.5x32 mm 300x2.0x32 mm 350x3.0x32 mm
General use Medium hard steel
Non ferrous medium hard material
102311N 102511N 103011N 103511N
11N R/Al2O3
230x1.5x32 mm 250x1.5x32 mm 300x2.0x32 mm 350x3.0x32 mm
Soft to medium hard steels Non ferrous soft to
medium hard material Polymers
95-B2101 95-B2201 95-B2301 95-B2401
Typ HHH R/Al2O3
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
Extremely hard ferrous material and steel HRC > 60
95-B2102 95-B2202 95-B2302 95-B2402
Typ HH R/Al2O
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
Hard ferrous material and steel HRC 50-60
95-B2103 95-B2203 95-B2303 95-B2403
Typ H R/Al2O
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
Ferrous material and steel HRC 35-50
95-B2104 95-B2204 95-B2304 95-B2404
Typ FS R/Al2O
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
General Cutting of soft ferrous materials
95-B2105 95-B2205 95-B2305 95-B2405
Typ NF R/SiC
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
General Cutting of non ferrous materials
95-B2111 95-B2211 95-B2311 95-B2411
Typ 6HS R/SiC
229x1.7x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
Titanium Titanium Alloys
95-B2112 95-B2212 95-B2312 95-B2412
Typ HHA R/Al2O
229x1.6x32 mm 254x1.8x32 mm 305x1.8x32 mm 356x2.3x32 mm
Ductile and tough materials Super Alloys
11
2. Cut-off Wheels for Abrasive Cutters Abrasive cutting is the most widely used method of material sectioning for microscopic examination. Good cutting means freedom from burn, distortion and disturbed material. It is essential, therefore, to select the correct wheel for the specific application and to provide adequate specimen cooling while using the correct cutting technique. Silicon carbide is preferred for non-ferrous metals and non-metallics while aluminium oxide is best for ferrous metals. Coarse grits usually cut heavier sections faster and cooler while fine grits produce better surfaces and less burning on delicate pieces. Hard wheels break down more slowly, wear longer and are generally recommended for the softer materials. Soft wheels break down faster, exposing new cutting surfaces more rapidly, and are preferred for hard materials. Buehler offers selected abrasive wheels particularly developed for da smooth-cut, clean surface that is to a large extent free from surface deformation. Our abrasive discs have been
ifferent groups of materials. They result in
developed especially for the materialography cutters.
2.1.1. Abrasive Cut-off Wheels Ø 230 mm Ø 230 mm and Ø 229 mm for Cuto 10, SamplMet etc.
230 x 0.8 x 32 01 General use and delicate cutting (thin blade) (rubber bonded) 10 23 01 10 103.00
)
ed)
terials
oys
Ø 230 mm for cutters with Ø 22 mm arbor
230 x 1.6 x 32 02 Tool steels, carburised steels, stainless steel (rubber bonded) 10 23 02 10 103.00
230 x 1.6 x 32 08 High speed steel, stainless steel, carburised steel (resin bonded) 10 23 08 10 81.00
230 x 1.5 x 32 09 Steel and hard materials HRC 60 and above (resin bonded) 102309N 10 67.00
230 x 1.5 x 32 10 General use, medium hard steel, non-ferrous materials (resin bonded 102310N 10 67.00
230 x 1.5 x 32 11 Soft to medium hard steel, non-ferrous materials, plastics (resin bond 102311N 10 67.00
230 x 1.7 x 32 HHH Extremely hard ferrous materials and steel HRC > 60 95-B2101 10 49.80
230 x 1.7 x 32 HH Hard ferrous materials and steel HRC 50-60 95-B2102 10 49.80
230 x 1.7 x 32 H Ferrous materials and steel HRC 35-50 95-B2103 10 49.80
230 x 1.7 x 32 FS General cutting of soft materials 95-B2104 10 49.80
230 x 1.7 x 32 NF General cutting of non ferrous ma 95-B2105 10 49.80
230 x 1.7 x 32 6HS Titanium and titanium alloys 95-B2111 10 74.00
230 x 1.7 x 32 HHA Ductile materials and super all 95-B2112 10 49.80
If you have a cutter with 22 mm arbor, we will supply an adapter-ring Ø 22 mm to Ø 32 mm to use the above listed wheels.
Metallographic Cutting Abrasive Cutters are an integral part of the modern
d
will
igh
e frequently classified according to
metallographic laboratory and are preferred over drycutting and other more damaging techniques. A heat-damaged zone can alter the structure of the sample and is avoided by the use of a suitable cutting fluid. This cooling helps to prevent sample deformation analso washes away the swarf; surface roughness is reduced and wheel life extended. The optimal cutallow the specimen to be prepared in a fewer number of steps and in a shorter time. The abrasive cut is therefore of fundamental importance to ensure hquality in the final preparation. Abrasive wheels Abrasive wheels artheir degree of hardness. Wheels with a hard bond wear out more slowly, have a higher life and thus aremainly used for softer materials. Wheels with a softer bond wear out faster, revealing new sharp abrasives and are recommended for cutting harder materials.
SE
CT
ION
ING
12
2.1. 2. Abrasive Cut-off Wheels Ø 250mm Ø 250 mm and Ø 254 mm for Cuto 20, Delta AbrasiMet, AbrasiMet 2, AbrasiMatic etc
254 x 1.0 x 32 01 General use and delicate cutting (thin blade) (rubber bonded) 10 25 01 10 112.00
254 x 1.6 x 32 02 Tool steels, carburised steels, stainless steel (rubber bonded) 10 25 02 10 112.00
250 x 1.6 x 32 08 High speed steel, stainless steel, carburised steel (resin bonded) 10 25 08 10 84.00
250 x 1.5 x 32 09 Steel and hard materials HRC 60 and above (resin bonded) 102509N 10 69.00
250 x 1.5 x 32 10 General use, medium hard steel, non-ferrous materials (resin bonded) 102510N 10 69.00
250 x 1.5 x 32 11 Soft to medium hard steel, non-ferrous materials, plastics (resin bonded) 102511N 10 69.00
250 x 1.8 x 32 HHH Extremely hard ferrous materials and steel HRC > 60 95-B2201 10 58.00
250 x 1.8 x 32 HH Hard ferrous materials and steel HRC 50-60 95-B2202 10 58.00
250 x 1.8 x 32 H Ferrous materials and steel HRC 35-50 95-B2203 10 58.00
250 x 1.8 x 32 FS General cutting of soft materials 95-B2204 10 58.00
250 x 1.8 x 32 NF General cutting of non ferrous materials 95-B2205 10 58.00
250 x 1.8 x 32 6HS Titanium and titanium alloys 95-B2211 10 89.00
250 x 1.8 x 32 HHA Ductile and tough materials, super alloys 95-B2212 10 58.00
2.1. 3. Abrasive Cut-off Wheels Ø 300 mm Ø 300 mm and Ø 305 mm for PowerMet 1000, Cuto 35 etc.
305 x 1.0 x 32 01 General use and delicate cutting (thin blade) (rubber bonded) 10 30 01 10 127.00
305 x 1.6 x 32 02 Tool steels, carburised steels, stainless steel (rubber bonded) 10 30 02 10 127.00
300 x 1.6 x 32 08 High speed steel, stainless steel, carburised steel (resin bonded) 10 30 08 10 108.00
300 x 2.0 x 32 09 Steel and hard materials HRC 60 and above (resin bonded) 103009N 10 92.00
300 x 2.0 x 32 10 General use, medium hard steel, non-ferrous materials (resin bonded) 103010N 10 92.00
300 x 2.0 x 32 11 Soft to medium hard steel, non-ferrous materials, plastics (resin bonded) 103011N 10 92.00
300 x 1.8 x 32 HHH Extremely hard ferrous materials and steel HRC > 60 95-B2301 10 68.00
300 x 1.8 x 32 HH Hard ferrous materials and steel HRC 50-60 95-B2302 10 68.00
300 x 1.8 x 32 H Ferrous materials and steel HRC 35-50 95-B2303 10 68.00
300 x 1.8 x 32 FS General cutting of soft materials 95-B2304 10 68.00
300 x 1.8 x 32 NF General cutting of non ferrous materials 95-B2305 10 68.00
300 x 1.8 x 32 6HS Titanium and titanium alloys 95-B2311 10 114.00
300 x 1.8 x 32 HHA Ductile and tough materials and super alloys 95-B2312 10 68.00
Metallographic Cutting (continued)
Cutting with abrasive wheels
Abrasive cut-off wheels come in two bonding materials: resin bond and rubber bond. Resin-bonded abrasive wheels are used with most materials. The hardness of the bonding agent depends on the material being cut. The rubber-bonded wheels are characterised by a particularly thin cut and no-burn sectioning.
The sample must be firmly and evenly clamped, in order to prevent breaking the wheel and damage to the sample. The cutting force should be applied with care and in relation to the material. The table on the next page highlights the main problems that can occur during the cutting process, and the actions required to remedy these.
Diamond and Boron Nitride (CBN) Cut-Off wheels
As the development and use of modern engineering materials increases, so does the demands placed on the technology required to
prepare these materials for analysis. Diamond and CBN (boron nitride) abrasive wheels are able to section through hard metals, composite materials, plastics, glass and mineral fibres, ceramic(s), glass or bone without any problem. Whether a diamond or a boron nitride disc is to be used, depends essentially on the hardness or brittleness of the sample material.
Following is a general guideline: Metal bonded diamond disc: Aggressive sectioning of metals, general sectioning of composites materials with hard phases, PCB’s, ceramic coatings, glass and electronic packages Resin bonded diamond disc: Hard metals, tungsten carbide, gentle cutting of hard brittle materials (ceramic(s), glass etc.) CBN disc: Hard ductile materials (highly alloyed steel, cobalt and nickel based alloys, lead alloys)
13
2.1. 4. Abrasive Cut-off Wheels Ø 350 mm Ø 350 mm and Ø 356 mm for PowerMet 2000, PowerMet 3000 etc
356 x 1.6 x 32 01 General use and delicate cutting (thin blade) (rubber bonded) 10 35 01 10 178.00
356 x 2.7 x 32 02 Tool steels, carburised steels, stainless steel (rubber bonded) 10 35 02 10 178.00
350 x 3.0 x 32 09 Steel and hard materials HRC 60 and above (resin bonded) 103509N 10 117.00
350 x 3.0 x 32 10 General use, medium hard steel, non-ferrous materials (resin bonded) 103510N 10 117.00
350 x 3.0 x 32 11 Soft to medium hard steel, non-ferrous materials, plastics (resin bonded)) 103511N 10 117.00
350 x 2,3 x 32 HHH Extremely hard ferrous materials and steel HRC > 60 95-B2401 10 106.00
350 x 2.3 x 32 HH Hard ferrous materials and steel HRC 50-60 95-B2402 10 106.00
350 x 2.3 x 32 H Ferrous materials and steel HRC 35-50 95-B2403 10 106.00
350 x 2.3 x 32 FS General cutting of soft materials 95-B2404 10 106.00
350 x 2.3 x 32 NF General cutting of non ferrous materials 95-B2405 10 106.00
350 x 2.3 x 32 6HS Titanium and titanium alloys 95-B2411 10 141.00
350 x 2.3 x 32 HHA Ductile materials and super-alloys 95-B2412 10 106.00
2.1. 5. Abrasive Cut-off Wheels Ø 400 mm Ø 400 mm for PowerMet 5000, Cuto 75A etc.
400 x 3.0 x 32 09 Steel and hard materials HRC 60 and above (resin bonded) 104009N 10 161.00
400 x 3.0 x 32 10 General use, medium hard steel, non-ferrous materials (resin bonded) 104010N 10 161.00
2.2. AcuThin Cut-Off Wheels Buehler's AcuThin Cut-off Wheels have been formulated for fast sectioning of small, delicate specimens, as well as large sturdy specimens. These blades give the user a versatile cutting option that proves effective over a variety of specimen types.
AcuThin Series, fine grained alumina extra-thin cut-off wheels
229 x 0.64 x 32 R/Al2O3 for material >HRC45 10-4160-010 10 157.00 229 x 0.64 x 32 R/Al2O3 for material <HRC45 10-4161-010 10 157.00
254 x 0.76 x 32 R/Al2O3 for material >HRC45 10-4260-010 10 166.00 254 x 0.76 x 32 R/Al2O3 for material <HRC45 10-4261-010 10 166.00
305 x 0.81 x 32 R/Al2O3 for material >HRC45 10-4360-010 10 174.00 305 x 0.81 x 32 R/Al2O3 for material <HRC45 10-4361-010 10 174.00
Abrasive Cutting Trouble Shooting Guide Problem Possible Cause Suggested Remedy
Burning (bluish discoloration)
Overheated specimen
Increase coolant rate Lighten cutting pressure
Choose wheel for harder material (softer bond)
Rapid wheel wear Wheel bond breaking down
too rapidly
Choose wheel for softer material (harder bond)
Lighten cutting pressure
Frequent wheel breakage Uneven coolant distribution
Loose specimen Distribute the coolant more evenly Clamp the specimen more rigidly
Resistance to cutting Slow wheel breakdown
Choose wheel for harder material (softer bond)
reduce coolant flow Lighten cutting pressure
Cutter stalls Cutter capacity inadequate Use Cutter with greater HP
Limit sample size Use Orbital Cutter
SE
CT
ION
ING
14
2.3. Delta Orbital Cut-off Wheels, Ø 254 mm to 455 mm Delta Orbital Abrasive Cut-off Wheels are specially designed to maximize the technological advantages of the Delta Orbital Cutters. This family of wheels will produce minimal deformation without sacrificing efficient cutting rates. These wheels are formulated to give no burn, minimal deformation and a fast cut.
Ø 254 mm (10") Orbital Cut-Off Wheels
254 x 1.9 x 32 Tool steels HRC 60 & above, carburised steels (RR/Al2O3) 12-4210-010 10 88.00 254 x 1.9 x 32 Hard steel HRC 50 (RR/Al2O3) 12-4212-010 10 88.00 254 x 1.9 x 32 Medium hard steel HRC 35-50 (RR/ Al2O3) 12-4216-010 10 88.00 254 x 1.9 x 32 Soft or annealed steel HRC 15-35, HRB 46-90 (RR/Al2O3) 12-4220-010 10 88.00 254 x 1.9 x 32 Medium hard non-ferrous materials, titanium, zirconium(R/SiC) 12-4245-010 10 88.00 254 x 1.9 x 32 Soft non-ferrous materials, aluminium, brass, etc (R/SiC) 12-4250-010 10 88.00 254 x 1.4 x 32 Super alloys (RR/Al2O3) 12-4205-010 10 88.00
Ø 305 mm (12") Orbital Cut-Off Wheels
305 x 2.7 x 32 Tool steels HRC 60 & above, carburised steels (RR/Al2O3) 12-4410-010 10 109.00 305 x 2.7 x 32 Hard steel HRC 50 (RR/Al2O3) 12-4412-010 10 109.00 305 x 2.7 x 32 Medium hard steel HRC 35-50 (RR/ Al2O3) 12-4416-010 10 109.00 305 x 2.7 x 32 Soft or annealed steel HRC 15-35, HRB 46-90 (RR/ Al2O3) 12-4420-010 10 109.00 305 x 2.7 x 32 Medium hard non-ferrous materials, titanium, zirconium(R/SiC) 12-4445-010 10 109.00 305 x 2.7 x 32 Soft non-ferrous materials, aluminium, brass, etc (R/SiC) 12-4450-010 10 109.00 305 x 1.4 x 32 Super alloys (RR/Al2O3) 12-4405-010 10 109.00
Ø 356 mm (14") Orbital Cut-Off Wheels
356 x 2.7 x 32 Tool steels HRC60 & above, carburised steels (RR/Al2O3) 12-4310-010 10 123.00 356 x 2.7 x 32 Hard steel HRC50 (RR/Al2O3) 12-4312-010 10 123.00 356 x 2.7 x 32 Medium hard steel HRC35-50 (RR/Al2O3) 12-4316-010 10 123.00 356 x 2.7 x 32 Soft or annealed steel HRC15-35, HRB46-90 (RR/Al2O3) 12-4320-010 10 123.00 356 x 2.7 x 32 Medium hard non-ferrous materials, titanium, zirconium(R/SiC) 12-4345-010 10 123.00 356 x 2.7 x 32 Soft non-ferrous materials aluminium, brass, etc (R/SiC) 12-4350-010 10 123.00 356 x 1.6 x 32 Super alloys (RR/Al2O3) 12-4305-010 10 123.00
Ø 403 mm (16") Orbital Cut-Off Wheels
403 x 3.0 x 32 Tool steels HRC 60 & above, carburised steels (RR/Al2O3) 12-5610-010 10 169.00 403 x 3.0 x 32 Hard steel HRC 50 (RR/Al2O3) 12-5612-010 10 169.00 403 x 3.0 x 32 Medium hard steel HRC 35-50 (RR/Al2O3) 12-5616-010 10 169.00 403 x 3.0 x 32 Soft or annealed steel HRC 15-35, HRB 46-90 (RR/Al2O3) 12-5620-010 10 169.00 403 x 3.0 x 32 Medium hard non-ferrous materials, titanium, zirconium(R/SiC) 12-5645-010 10 169.00 403 x 3.0 x 32 Soft non-ferrous materials, aluminium, brass, etc (R/SiC) 12-5650-010 10 169.00 403 x 1.9 x 32 Super alloys (RR/Al2O3) 12-5605-010 10 169.00
Ø 455 mm (18") Orbital Cut-Off Wheels
455 x 3.8 x 32 Tool steels HRC 60 & above, carburised steels (RR/Al2O3) 12-5810-010 10 194.00 455 x 3.8 x 32 Hard steel HRC 50 (RR/Al2O3) 12-5812-010 10 194.00 455 x 3.8 x 32 Medium hard steel HRC 35-50 (RR/Al2O3) 12-5816-010 10 194.00 455 x 3.8 x 32 Soft or annealed steel HRC 15-35, HRB 46-90 (RR/Al2O3) 12-5820-010 10 194.00 455 x 3.8 x 32 Medium hard non-ferrous materials, titanium, zirconium(R/SiC) 12-5845-010 10 194.00 455 x 3.8 x 32 Soft non-ferrous materials, aluminium, brass, etc (R/SiC) 12-5850-010 10 194.00 455 x 2.4 x 32 Super alloys (RR/Al2O3) 12-5805-010 10 194.00
Advantages of Orbital Cutting
Chop Cutter using Orbital Technology. Orbital cutting technology offers advantages in comparison to the traditional chop cut in that the contact area between abrasive wheel and the sample is kept as small as possible (MACC = Minimal Area of Contact Cutting). This is achieved by the eccentric rotation of the wheel. Thus the wheel continuously changes its position in relation to the cut and has only a small point of contact with the sample. With the orbital cutting technology you achieve fast and deformation-free cuts, and can cut large samples and/or samples that are difficult to cut with the normal chop cut. Another advantage with orbital cutting technology is the cooling agent can flow directly into the cutting area, increasing the cooling efficiency and preventing unwanted overheating.
15
2.4. Diamond and CBN Cut-off Blades, Ø 200 mm to 450 mm Ø 200 mm or 230 mm for Cuto 10, SamplMet etc
200 x 1.1 x 32 Diamond cut-off blade, resin bonded, general use 11-4608 1 310.00
200 x 1.2 x 32 Diamond cut-off blade, resin bonded, hard metals 11-4808E 1 314.00
230 x 1.2 x 32 Diamond cut-off blade, bronze bonded ceramics and petrographic samples 11-4709E 1 373.00
200 x 1.1 x 32 CBN cut-off blade hardened steel >55 HRC and general use 10 20 50 1 328.00
Ø 250 mm for Cuto 20, Delta AbrasiMet, AbrasiMet 2, AbrasiMatic etc
250 x 1.3 x 32 Diamond cut-off blade, resin bonded general use 11-4610 1 404.00
250 x 1.2 x 32 Diamond cut-off blade, bronze bonded ceramics and petrographic samples 11-4710E 1 294.00
250 x 1.2 x 32 Diamond cut-off blade, resin bonded, hard metals 11-4810E 1 466.00
250 x 1.25 x 32 Diamond cut-off blade, large grain size special for plastics and polymers 10 25 57 1 378.00
250 x 1.2 x 32 CBN cut-off blade hardened steel >55 HRC and general use 10 25 51 1 484.00
Ø 300 mm for PowerMet 1000, Cuto 35 etc
300 x 1.4 x 32 Diamond cut-off blade, resin bonded, hard metals and general use 10 30 56 1 672.00
300 x 2.2 x 32 Diamond cut-off blade, bronze bonded ceramics and petrographic samples 10 30 53 1 416.00
300 x 1.9 x 32 CBN cut-off blade hardened steel >55 HRC and general use 10 30 51 1 615.00
Ø 350 mm for PowerMet 2000, PowerMet 3000, Delta-Cutter, Cuto 75A etc
350 x 1.5 x 32 Diamond cut-off blade, resin bonded, hard metals and general use 11-4814E 1 726.00
350 x 1.5 x 32 Diamond cut-off blade, bronze bonded ceramics and petrographic samples 11-4714E 1 577.00
350 x 2.0 x 32 CBN cut-off blade hardened steel >55 HRC and general use 10 35 51 1 837.00
Ø 400 mm for Delta-Cutter, Cuto 75A etc
400 x 2.0 x 32 Diamond cut-off blade, resin bonded, hard metals and general use 10 40 56 1 922.00
400 x 1.7 x 32 CBN cut-off blade, hardened steel >55 HRC and general use 10 40 50 1 894.00
Ø 450 mm for Delta 2319 etc
450 x 2.0 x 32 Diamond cut-off blade, resin bonded, hard metals and general use 10 45 56 1 1,014.00
2.5. Diamond Cut-off Blades for Lapro slab saws Ø 457 mm and 609 mm for Lapro slab saw
457x1,6x19 RIMLOCK Diamond cut-off blade 18" 11-1518-064 1 329.00
609x1,9x25,4 RIMLOCK Diamond cut-off blade 24" 11-1524-075 1 479.00
SE
CT
ION
ING
16
2.6. Sectioning Accessories Cutting fluid anti-corrosive. For Abrasive Cutters and Precision Cutters
IsoCut Fluid* Cutting fluid, oil-based 11-1193-032 950 mL 27.60 IsoCut Fluid* Cutting fluid, oil-based 11-1193-128 3.8 L 79.00
IsoCut Plus Cutting fluid, water-soluble, mineral oil-free 11-2293-016 470 mL 21.60
Mineral Spirit Cutting fluid, water free 40-8140-032 950 mL 16.80 Mineral Spirit Cutting fluid, water free 40-8140-128 3.8 L 30.60
* Only to be used with low speed IsoMet saws.
Cutting fluid anti-corrosive. For Abrasive Cutters and Precision Cutters
Cool Coolant + corrosion protective 10 90 01 1 L 12.20 Cool Coolant + corrosion protective 10 90 10 10 L 84.00
CoolMet 2 Cutting fluid, water-soluble, mineral oil-free 10-4330-095 1 L 48.00 CoolMet 2 Cutting fluid, water-soluble, mineral oil-free 10-4330-128 3.8 L 127.00 CoolMet 2 Cutting fluid, water-soluble, mineral oil-free 10-4330-640 19 L 446.00
* Mixing ratio: one part Cool with thirty parts of water. CoolMet 2 mix one part to thirty parts of water.
Paste to keep transparent windows in cutters clear
Glossy Clear-paste 10 90 03 60 mL 12.00
Dressing Sticks for Diamond- and CBN-Blades
To maximize the cutting efficiency of the Buehler Diamond Wafering Blades, proper dressing of the blade is required. Buehler’s Dressing Sticks are formulated to have the proper texture and composition to quickly restore wafering blade cutting efficiency. When dressing Buehler Wafering Blades, use the dressing stick with the same series classification as on the blade.
Dressing Stick Series 30, 20 and 15 25.4 x 12.7 x 76 mm 11-2490 1 19.60 Dressing Stick Series 10 and 5 25.4 x 12.7 x 76 mm 11-2495 1 22.60 Dressing Stick Series 30, 20, 15 and IsoCut 12.7 x 12.7 x 76 mm 11-1190 1 12.60 Dressing Stick Series 10 and 5 12.7 x 12.7 x 76 mm 11-1290 1 12.60 Dressing Stick for Abrasive Cutter’s Wheels 25.4 x 25.4 x 76 mm 10-4000 1 16.00
Chuck Padding
Chuck Padding for IsoMet Chucks 25.4 x 152 mm 11-2496 1 33.00
2.7. Accessories for PetroThin Cut-off blades for PetroThin
ContinuousRim Diamond cut-off blade 11-4278 1 815.00 ContinuousRim CBN cut-off blade 11-4280 1 815.00
Grinding Cups for PetroThin
Diamond Cup Grinding Wheel 203 x 6.4 x 25.4 mm 40-4508 1 1,061.00 CBN Cup Grinding Wheel 203 x 6.4 x 25.4 mm 40-4512 1 1,083.00 Dressing Stick 12.7 x 12.7 x 102mm 40-4510 1 16.80
2.8. Grinding Cups for IsoMet 5000 Buehler Cup Grinders are designed for use on the IsoMet 5000 Linear Precision Cutter. The cup grinders are used for automatic grinding to target depth and for thin section preparation.
For ferrous material, Alumina vitrified
Grinding Cup Grit 60 Ø 152 mm 11-2720 1 126.00
For non-ferrous material, Silicon carbide vitrified
Grinding Cup Grit 60 Ø 152 mm 11-2730 1 137.00
For ceramic and petrographic samples, diamond
Grinding Cup Grit 240 Ø 127 mm 11-2740 1 495.00
17
3. Compression Mounting
Overview Compression Mounting Designation Material Properties Application
PhenoCure Bakelite
black, red, green
Phenolic mounting compound with wood flour filler
Thermosetting
black/red/green Small contraction, Medium hardness
Routine work Recognition of samples with colour coded identification
Epovit Epoxy mounting compound with filler (glass and mineral
materials) Thermosetting
black Very low contraction
High Hardness
Edge investigations Embedding hard materials flatness
EpoMet
Epoxy mounting compound with filler (mineral)
Thermosetting
black No contraction High Hardness
Edge investigations Embedding hard materials flatness
TransOptic fine grained
Thermoplastic Transparent
Average hardness
Transparent Embedding Targeted preparation
Embedding sensitive samples
KonductoMet I Phenolic mounting compound
Filler: Graphite Thermosetting
black Conductive
SEM-applications, Electrolytic polishing
ProbeMet Epoxy mounting compound
Filler: Copper Thermosetting
Copper Colour Conductive
SEM-applications, Electrolytic polishing
Premoulds Phenolic mounting compound
with wood flour filler Thermosetting
black/green Small contraction, Average hardness
Routine work Recognition of samples with
identification colours
Selection Criteria for Compression Moulding Designation Transparency Edge Retention Shrinkage Cycle Time Bakelite B/R/G Some, small < 10 min
Epovit Negligible < 10 min
EpoMet None < 10 min
TransOptic Some, small < 20 min
KonductoMet I Some, small < 10 min
ProbeMet None < 10 min
Premoulds Some, small < 10 min
Very Good Good Average Not suitable
Compression Mounting During compression mounting the sample is embedded under temperature and pressure. One advantage of compression mounting is in the very high hardness of our thermosetting polymers, which is not achievable with cold mounting materials. A further advantage is the ease of handling. With all hot compression mounts, cooling the sample under pressure is recommended, and is essential with thermoplastics in order to prevent the "cotton ball" effect. Buehler mounting presses are designed with an efficient linear cooling cycle. With the hot compression mounts, we differentiate between thermosetting polymers and thermoplastics: Thermosetting polymers are powders, and fuse under simultaneous pressure and heating. Fillers can improve hardness and shrinkage. Different powder sizes affect the flow characteristics. For ease of use and rapid handling, the Phenocure phenolic compound is available in a tablet form called Premoulds. They are available in different diameters and suitable to mount samples not sensitive to pressure. Premoulds are handy and shorten the embedding cycle. Thermoplastics are acrylic mounting materials that melt when heated, then polymerise when cooled
under pressure, therefore requiring longer cooling times. Thermoplastics, unlike thermosetting polymers, can be melted after hardening. Thermoplastic curing is reversible and the mount can be melted again at any time. They are very suitable as embedding compounds for pressure-sensitive samples. Here the acrylic powder is melted without pressure and then subjected to pressure when the final temperature is reached and during cooling.
MO
UN
TIN
G
18
3.1. Compression Mounting Compounds Thermosetting, Phenolic Hot mounting compound with wood flour filler, medium hardness, general use
PhenoCure (Bakelite) black 11 20 31 3.0 kg 22.20 PhenoCure (Bakelite) black 11 20 04 8.0 kg 49.80 PhenoCure (Bakelite) black 11 20 07 25.0 kg 101.00
PhenoCure (Bakelite) R red 11 20 32 3.0 kg 24.20 PhenoCure (Bakelite) R red 11 20 05 8.0 kg 56.00 PhenoCure (Bakelite) R red 11 20 08 25.0 kg 116.00
PhenoCure (Bakelite) G green 11 20 33 3.0 kg 24.20 PhenoCure (Bakelite) G green 11 20 06 8.0 kg 56.00 PhenoCure (Bakelite) G green 11 20 09 25.0 kg 116.00
Thermosetting, Epoxy Hot mounting compound, high hardness, good edge retention, filler: glass fibres and mineral
Epovit black 11 20 13 3.0 kg 83.00 Epovit black 11 20 16 8.0 kg 191.00 Epovit black 11 20 19 25.0 kg 416.00
Thermosetting, Epoxy Hot mounting compound, high hardness, good edge retention, filler: mineral
EpoMet G black regular grainsize 20-3380-064 1.84 kg 63.00 EpoMet G black regular grainsize 20-3380-400 11.25 kg 263.00
EpoMet F black fine grained! 20-3381-070 1.84 kg 71.00 EpoMet F black fine grained! 20-3381-400 11.25 kg 297.00
Thermoplastic, Acrylic Hot mounting compound for transparent mounting
TransOptic transparent 20-3400-080 2.3 kg 49.20
Thermosetting, conductive for SEM-analysis, fine grained Epoxy Hot mounting compound filled with copper, high hardness, good edge retention
ProbeMet copper colour 20-3385-064 1.84 kg 80.00
Thermosetting, conductive Phenolic for SEM-analysis, Filler: graphite
KonductoMet I black 20-3375-016 0.45 kg 32.00 KonductoMet I black 20-3375-400 11.25 kg 597.00
3.2. Premoulds Thermosetting-Premoulds, Phenolic Hot mounting compound with wood flour filler, medium hardness, for faster embedding
Premoulds black 25.4 mm, 1" 20-3111-500 500 74.00 Premoulds black 31.8 mm, 1 ¼ " 20-3112-500 500 93.00 Premoulds black 38.1 mm, 1½" 20-3113-500 500 112.00
Premoulds green 31.8 mm, 1 ¼ " 20-3312-500 500 107.00 Premoulds green 38.1 mm, 1 ½ " 20-3313-500 500 131.00
Recommended Parameters for Hot Mounting Materials
25 mm (1") 30 mm (1¼") 40 mm (1½") 50 mm (2")
Material Temperature Pressure Heat/Cool Heat/Cool Heat/Cool Heat/Cool
PhenoCure 150° C 200 bar 1 / 3 min 1 / 3 min 1.5 / 3 min 2 / 3.5 min
EpoMet / Epovit 150° C 200 bar 1 / 3 min 1 / 3 min 1.5 / 3 min 2 / 3.5 min
KonductoMet I 150° C 200 bar 1 / 3 min 1 / 3 min 1.5 / 3 min 2 / 3.5 min
ProbeMet 150° C 200 bar 1 / 3 min 1 / 3 min 1.5 / 3 min 2 / 3.5 min
Diallylphthalate 150° C 200 bar 1 / 3 min 1 / 3 min 1.5 / 3 min 3 / 3.5 min
TransOptic 180 °C 200 bar 6 / 11 min 6 / 11 min 7 / 11 min 8 / 11 min
The indicated values are reference values for SimpliMet 1000 & 3000; for the SimpliMet 2000 an additional pre-heat time of seven minutes is added to the HEAT time; the settings can deviate from proposed parameters.
19
4. Castable (Cold) Mounting Compounds
Overview Castable Mounting
Designation Material Colour Curing
max. Temp. Viscosity Shrinkage
VariDur 10 Powder & hardener
Acrylic Semi transparent
low odour 6-8 min
max. 100°C High Small
VariDur 200 Powder & hardener
Acrylic with Filler
Opaque (blue) low odour
6-8 min max. 100°C
High Small
VariKleer Powder & hardener
Acrylic Crystal clear
under pressure 6-8 min
max. 100°C Medium Small
VariDur 3000 Powder & hardener
Acrylic + Styrene
Light blue opaque15 min
max. 122°C Medium None
SamplKwick Powder & hardener
Acrylic
Semi transparentlow odour
5-8 min max. 80°C
High Medium
VariKwick Powder & hardener
Acrylic Blue 5 min
max. 85°C Medium Medium
EpoPlast Resin & hardener
Epoxide Transparent 6-8 h
max. 100°C Medium Very small
EpoxiCure Resin & hardener
Epoxide Transparent 6-8 h
max. 30°C Medium-
low Very small
EpoKwick Resin & hardener
Epoxide Transparent 30-45 min max. 85°C
Medium-Low
Small
EpoHeat Resin & hardener
Epoxide Transparent
golden 90 min @ 65° C Very low Very small
EpoThin Resin & hardener
Epoxide Transparent 12 h
max. 27°C Very low Very small
EpoColor Resin & hardener
Epoxide Red 1-2 h
max. 80°C Medium-
low Very small
Technovit 5000 Powder & hardener
Acrylic with copper
Copper-coloured 7 min
max. 125°C High Medium
4.1. Acrylics Acrylic, fast curing, curing time 8 min, reduced odour
VariDur 10 Kit with 1 kg powder / 500 mL hardener 11 10 37 1 Set 71.00 VariDur 10 Powder, semi transparent 11 10 27 1 kg 49.00 VariDur Hardener 11 10 29 500 mL 22.60
VariDur 200 Kit with 1 kg powder / 500 mL hardener 11 10 39 1 Set 71.00 VariDur 200 Powder with filler, blue opaque 11 10 30 1 kg 49.00 VariDur Hardener 11 10 29 500 mL 22.60
VariDur 10 Large size, semi transparent, powder 11 10 31 10 kg 417.00 VariDur 200 Large size, blue opaque, powder with filler 11 10 34 10 kg 417.00 VariDur Large size, hardener 11 10 33 5 x 1 L 209.00
VariDur 3000, Light blue opaque, acrylic + styrene, shrink-free, hard, curing time approx. 15 min
VariDur 3000 Kit with 1 kg powder / 500 mL hardener 20-3580 1 Set 62.00 VariDur 3000 Powder, light blue opaque 20-3581 1 kg 38.80 VariDur 3000 Hardener 20-3582 500 mL 23.20 VariDur 3000 Large size, powder, light blue opaque 20-3583 10 kg 350.00 VariDur 3000 Large size, hardener 20-3584 5 x 1 L 190.00
Acrylic, fast curing, curing time 5 - 15 min
VariKleer* Kit with 1 kg powder / 500 mL hardener 20-3590 1 Set 53.00 VariKleer* Powder 20-3591 1 kg 35.40 VariKleer* Liquid 20-3592 500 mL 17.00 VariKleer* Powder 20-3591-002 2 x 1 kg 70.00 VariKleer* Liquid 20-3592-001 1 L 33.80 VariKleer* Large size, powder 20-3591-010 10 kg 325.00 VariKleer* Large size, liquid 20-3592-005 5 x 1 L 158.00
*Transparent for hardening under pressure within pressure vessel
MO
UN
TIN
G
20
4.1. Acrylics (continued) SamplKwick, acrylic cold mounting compound, fast curing, curing time 5-8 min
SamplKwick Kit with 0.45 kg powder / 0.36 L hardener 20-3560 1 Pk 62.00 SamplKwick Powder 20-3562 450 g 51.00 SamplKwick Hardener 20-3564 360 mL 19.20 SamplKwick Powder 20-3566 2300 g 204.00 SamplKwick Hardener 20-3568 1920 mL 62.00 SamplKwick Powder 20-3562-025 11.5 kg 783.00 SamplKwick Hardener 20-3564-320 9.6 L 224.00 SamplKwick Powder 20-3562-100 45 kg 2,797.00 SamplKwick Hardener 20-3564-640 19.2 L 414.00
VariKwick, very fast curing, curing time approx. 5 min
VariKwick Kit with 1 kg powder / 500 mL hardener 20-3595 1 Set 56.00 VariKwick Powder 20-3596 1 kg 37.60 VariKwick Liquid 20-3597 500 mL 18.60 VariKwick Large size, powder 20-3596-010 10 kg 354.00 VariKwick Large size, liquid 20-3597-005 5 x 1 L 170.00
Technovit 5000, conductive embedding compound with Cu-filler for SEM investigations, curing time approx. 7 min
Technovit 5000 Powder with Cu-filler 11 10 13 1 kg 55.00 Technovit 5000 Hardener 11 10 14 500 mL 21.20
4.2. Epoxies EpoxiCure, low shrinkage, low heating during curing, curing time 6-8 h
EpoxiCure (EPOXIDE) Resin 20-8130-032 950 mL 39.80 EpoxiCure (EPOXIDE) Hardener 20-8132-008 240 mL 25.00 EpoxiCure (EPOXIDE) Resin 20-8130-128 3.8 L 111.00 EpoxiCure (EPOXIDE) Hardener 20-8132-032 950 mL 50.00
EpoHeat, excellent clarity (golden colour), ultra-low viscosity, very low shrinkage, curing time approx. 90 min at 65° C
EpoHeat Resin 20-8120-032 950 ml 67.00 EpoHeat Hardener 20-8122-016 470 ml 36.60
EpoThin, very low viscosity epoxy, no heating during curing process, low shrinkage, curing time 7-9 h
EpoThin Resin 20-8140-032 950 mL 67.00 EpoThin Hardener 20-8142-016 470 mL 36.60 EpoThin Resin 20-8140-128 3.8 L 196.00 EpoThin Hardener 20-8142-064 1.9 L 89.00
Epoxy cold mounting compounds are useful for vacuum impregnation of porous materials
EpoKwick, fast curing epoxy cold mounting compound, curing time 30-45 min
EpoKwick Kit complete 950 mL resin / 240 mL hardener 20-8128 1 Pk 129.00 EpoKwick Kit complete 3.8 L resin / 950 mL hardener 20-8129 1 Pk 198.00 EpoKwick Resin 20-8136-128 3.8 L 141.00 EpoKwick Hardener 20-8138-032 950 mL 70.00
EpoColor, red pigmented epoxy cold mounting compound, low shrinkage, curing time 1-2 h suitable for highlighting cracks and pores in darkfield or crossed polars illumination
EpoColor Resin 20-8143-032 950 mL 87.00 EpoColor Hardener 20-8144-008 240 mL 22.20
EpoMix, low shrinkage, low heating, curing time 6-8 h
EpoMix Box of 10 packs of 30 mL 20-8133-001 1 Pk 48.80
EpoPlast, low shrinkage, curing time 4-8 h
EpoPlast Resin 11 10 61 500 mL 14.40 EpoPlast Hardener 11 10 62 250 mL 13.20
21
4. Castable (Cold) Mounting Compounds (continued)
Selection Criteria for Cold Mounting Compounds
Product Curing Time Transparency Vacuum
Impregnation Edge Retention Specific Applications
VariDur 10 < 10 min Semi
transparent Routine
VariDur 200 < 10 min Routine
VariDur 3000 10 min Edge investigation
VariKleer < 10 min Transparent* PCB
SamplKwick < 10 min Semi
transparent PCB
VariKwick 5 min
EpoxiCure < 8 h Transparent < HV400
EpoKwick < 1 h Transparent < HV400 Quick cure
EpoHeat < 2 h @ 65° C Transparent < HV400 Quick cure
EpoThin < 24 h Transparent < HV400 Petrography
EpoColor < 2 h < HV400 Colour contrast of pores
& cracks in DF
EpoPlast < 8 h Transparent < HV400
Technovit 5000 < 10 min SEM, electrolytic polishing
* in combination with compression hardening in a pressure pot Very Good Good Average Not suitable
Cold Mounting The main advantage of cold mounting is the ability to mount specimens of irregular shape and size. It is often favoured for embedding individual samples, when the acquisition of a mounting press is not economically justifiable. Conversely, it is helpful for mounting large numbers of samples as quickly as possible. Cold mounting products fall into one of three categories: acrylics, polyesters and epoxies. They may consist of two or more components that need to be mixed together to make a solid cured specimen. Epoxide compounds exhibit the lowest contraction. The long curing time gives outstanding edge retention and very low shrinkage, and is chemically resistant. Acrylics have a short curing time and have a small amount of contraction that can be improved with fillers and curing under pressure e.g. Technomat. With polyester resins the curing times are relatively short, but often produce a poor quality mount and are only used due to low cost. After mixing the components, the hardening process takes place via an exothermic reaction. During curing, particularly with acrylics, this hardening process can generate over 80ºC, and one must be careful when working with temperature-sensitive materials, e.g. plastics, where the structure of the sample can be affected. Vacuum Impregnation: Porous materials, e.g. ceramic(s) or sprayed coatings should be vacuum impregnated with epoxy resin prior to sectioning. The porous or friable ceramic is strengthened and protected by the epoxy resin. Cavities, pores and cracks that are open to the surface are filled with the embedding material. For high contrast definition of pores and cracks, we offer Epo-Color resin which, under dark field lighting, appears a vivid red colour and thus makes the interpretation of the structure easier.
MO
UN
TIN
G
22
4.3. Castable (Cold) Mounting Moulds Mounting Moulds for castable (cold) resins, polyethylene, reusable
SamplKup Ø 25 mm blue 20-9177 12 22.60 SamplKup Ø 30 mm blue 20-9179 12 22.60 SamplKup Ø 40 mm blue 20-9182 12 22.60 SamplKup Ø 50 mm blue 20-9183 12 22.60 SamplKup Ø 1" (25,4 mm) blue 20-9178 12 22.60 SamplKup Ø 1¼" (32 mm) blue 20-8180 12 22.60 SamplKup Ø 1½" (38 mm) blue 20-9181 12 22.60 SamplKup Ø 2" (50,8 mm) blue 20-9184 12 22.60
Mounting Moulds for castable (cold) resins, silicon rubber, reusable
Mounting Mould Ø 25 mm, height 23 mm blue 11 30 01 1 6.60 Mounting Mould Ø 30 mm, height 25 mm blue 11 30 02 1 7.00 Mounting Mould Ø 32 mm, height 25 mm blue 11 30 03 1 7.00 Mounting Mould Ø 38 mm, height 25 mm blue 11 30 04 1 7.60 Mounting Mould Ø 40 mm, height 30 mm blue 11 30 05 1 7.60 Mounting Mould Ø 50 mm, height 30 mm blue 11 30 06 1 12.00 Mounting Mould Ø 60 mm, height 35 mm blue 11 30 07 1 13.00 Mounting Mould 55 x 30 x 22 mm (WxDxH) 11 30 10 1 11.00 Mounting Mould 70 x 40 x 22 mm (WxDxH) 11 30 11 1 14.00 Mounting Mould 100 x 50 x 22 mm (WxDxH) 11 30 12 1 25.00
Flexible EPDM Mounting Cups, reusable
EPDM Mounting Cup 63 x 35 x 46 mm (WxDxH) blue 20-6185 1 17.00 EPDM Mounting Cup 150 x 100 x 50 mm (WxDxH) blue 20-6186 1 30.60 EPDM Mounting Cup 150 x 76 x 25 mm (WxDxH) blue 20-6187 1 27.20
Phenolic ring forms for mounting, single use
Ringforms Ø 1" (25,4 mm) O.D. black 20-8251-010 10 2.80 Ringforms Ø 1" (25,4 mm) O.D. black 20-8251-100 100 23.80 Ringforms Ø 1" (25,4 mm) O.D. black 20-8251-500 500 106.00 Ringforms Ø 1¼" (32 mm) O.D. black 20-8252-010 10 3.00 Ringforms Ø 1¼" (32 mm) O.D. black 20-8252-100 100 26.00 Ringforms Ø 1¼" (32 mm) O.D. black 20-8252-500 500 114.00 Ringforms Ø 1½" (38 mm) O.D. black 20-8253-010 10 3.20 Ringforms Ø 1½" (38 mm) O.D. black 20-8253-100 100 28.00 Ringforms Ø 1½" (38 mm) O.D. black 20-8253-500 500 125.00 Ringforms Ø 2" (50,8 mm) O.D. black 20-8254-010 10 3.60 Ringforms Ø 2" (50,8 mm) O.D. black 20-8254-100 100 32.00 Ringforms Ø 2" (50,8 mm) O.D. black 20-8254-500 500 140.00 Ringforms Ø 25 mm O.D. black 20-8155-010 10 2.80 Ringforms Ø 25 mm O.D. black 20-8155-100 100 23.80 Ringforms Ø 25 mm O.D. black 20-8155-500 500 106.00 Ringforms Ø 30 mm O.D. black 20-8156-010 10 3.00 Ringforms Ø 30 mm O.D. black 20-8156-100 100 26.00 Ringforms Ø 30 mm O.D. black 20-8156-500 500 114.00 Ringforms Ø 40 mm O.D. black 20-8157-010 10 3.20 Ringforms Ø 40 mm O.D. black 20-8157-100 100 28.00 Ringforms Ø 40 mm O.D. black 20-8157-500 500 125.00 Ringforms Ø 50 mm O.D. black 20-8158-010 10 3.60 Ringforms Ø 50 mm O.D. black 20-8158-100 100 32.00 Ringforms Ø 50 mm O.D. black 20-8158-500 500 137.00
Recessed Plastic Disc for mounting with phenolic ringforms
Recessed Plastic Disc Ø 25 mm I.D. 20-3511 5 10.00 Recessed Plastic Disc Ø 30 mm I.D. 20-3512 5 10.00 Recessed Plastic Disc Ø 1¼" (32 mm) I.D. 20-3513 5 10.00 Recessed Plastic Disc Ø 1½" (38 mm) I.D. 20-3514 5 10.00 Recessed Plastic Disc Ø 40 mm I.D. 20-3515 5 10.00 Recessed Plastic Disc Ø 50 mm I.D. 20-3516 5 10.00 Recessed Plastic Disc Ø 2" (50,8 mm) I.D. 20-3517 5 10.00
Circuit Board Holders (to be used with phenolic ring forms 20-8152-010)
Circuit Board Holders Ø 29 mm 20-8200-010 10 13.00
Angle Polishing Inserts (to be used with phenolic ring forms 20-8152-010)
Angle Polishing Inserts Ø 29 mm 20-8205-010 10 20.60
23
4.4. Filler and Contrast Materials for Cold Mounting Filler (globular oxide ceramic) for hardness increase of the epoxy cold mounting compounds and better flatness
FlatEdgeFiller 20-8196 0.5 kg 17.60
Conductive Filler (nickel base) for cold mounting comp. (spec. epoxy) to be used for SEM investigations /electrolytic polishing
ConductiveFiller 20-8500 0.9 kg 70.00
Blue dye for epoxy cold mounting compounds
Epoblue Powder 11 10 68 25 g 9.00 alternative: EpoColor
Dyes for epoxy castable (cold) mounting compounds
Blue Pigment Liquid 20-8501 30 mL 16.80 Black Pigment Liquid 20-8502 30 mL 16.80 Brown Pigment Liquid 20-8503 30 mL 16.80 Red Pigment Liquid 20-8504 30 mL 16.80
4.5. Accessories for Cold and Hot Mounts Supporting Aids for Sheets, PCB’s, Threads, etc
UniClip Plastic black 11 30 43 100 22.00 UniClip Plastic red 11 30 68 100 22.00 UniClip Plastic green 11 30 69 100 22.00 UniClip Plastic transparent 20-5100-100 100 36.00 SamplKlip Stainless steel 6 mm wide 20-4000-100 100 28.20 SamplKlip I Plastic 6 mm wide 20-4100-100 100 27.60 Clamp Stainless steel 6 mm wide 11 30 40 100 23.80 MultiClamp Plastic 5 steps, 1 mm distance 11 30 44 100 22.00 MultiClamp Plastic 4 steps, 2 mm distance 11 30 45 100 22.00 MultiClamp Plastic 4 steps, 3 mm distance 11 30 46 100 22.00
General Mounting Accessories
Release Agent Bottle with swab 20-8185-002 30 mL 4.80 Release Agent Refill bottle 20-8185-008 240 mL 19.60 Release Agent Refill bottle 20-8185-016 470 mL 25.00 Release Agent Refill bottle 20-8185-032 950 mL 43.00 Mould Release Powder for mounting cylinders 20-3048 45 g 19.60 Funnel for filling moulding material into press 82 60 06 1 2.60 Silicone spray Mold release 11 30 23 200 mL 11.80 Silicone paste P Mold release 11 30 22 100 g 11.20 Paper cups content: 200 mL with stirrer 11 30 30 50 5.80 Paper cups for vacuum-impregnation unit, waxed, 150 mL 20-8177-100 100 18.00 Stirring Sticks Wooden sticks 11 30 34 100 2.80 Wall holder for mixing cups 11 30 30 11 30 31 1 15.80 Sample Identity Labels 95-B140 200 3.60 Epoxi Supply Tubes for Cast N' Vac 20-3520 100 20.80
4.6. Electroless Nickel for Coating EdgeMet Kit for coating of specimen
EdgeMet-Kit 950 mL solution A + B, 180 mL preclean soln 20-8192 1 Kit 66.00
MO
UN
TIN
G
24
MagnoSys
MagnoSyss Magneticc System is a magnetic-based system used in conjunction with bothabrasive papers and polishing cloths. MagnoSys consists of two components. Its cost effectiveness and easy handling renders the magnetic system an ideal component inyour preparation process. The acquisition is worthwhile even when you already possess a number of platens. Simply add these thinly designed components to your current platens without incurring additional platen costs. You will also gain additional space in yourlaboratory, as in the ideal case, only one magnetic platen will be required per preparation unit.Furthermore, the reusability and environmentally friendly design of MagnoMetdiscs helps to reduce waste. MagnoFix is a magnetic substrate which enables you to turn existing platens without any effort into magnetic platens. It does notmake any difference whether your platens are made from aluminium or PVC. As MagnoFix has been fitted with a self-adhesive PSA-backing, it can easily be attached to any existing platen. Platens coated with MagnoFix serve as a carrier for special ferromagneticdiscs onto which you can glue conventionalabrasive paper or polishing cloths. This principle allows you to change the abrasivepaper or the polishing cloths between the individual preparation stages in no time. MagnoPad and MagonMet serve as a carrier forcustomary abrasive papers, grinding discs or polishing cloths. While paper is fixed to the disc with a double-sided adhesive tape or sprayed glue, cloths can be glued directly onto the carrier. There is no need for special consumables. Depending on the adhesivestrength of the PSA-backing, this economicsolution allows you to detach dirty or unusable polishing cloths, or worn out paper from the disc, and to fit the carrier with a new cloth.One MagnoPad or MagnoMet disc is required for each preparation step. Together with paper or cloth, MagnoPad or MagnoMet is put ontothe magnetic platen, enabling you to grind or polish as usual. The disc is secure on the platenthanks to the magnetic force of the MagnoFix base. A further advantage of the system is the
fact that, between the individual grinding and polishing stages, the disc can easily be lifted and exchanged. The magnetic platen remains in the grinder/polisher throughout the entire preparation process. MagnoPad has a special coating that allows easy removal of the cloth or paper.
Apex Magnetic System
Apexx Quick-Changee Magneticc System is a new magnetic-based system used in conjunction with both abrasive papers and polishing cloths. Apex consists of two components. The first is ApexM reusable, long-life magnetic discs. With a self-adhesive backing on one side, the ApexM disc can be used on any conventional platen. The secondcomponent is the ApexB bimetallic plate and isused between the ApexM disc and any self-adhesive backed abrasive paper, polishing cloth or any consumable of choice.
ApexHercules finee grindingg discs are used together with 9μm or 6 μm diamond suspensions to achieve a fine grinding step that replaces up to five steps of Silicon Carbide paper after the initial planar grinding stage. Together with a larger micron diamonds, the disc can be used also directly for planar grinding. Your advantage: High abrasion rate reduces the number of preparation steps; excellentflatness and edge retention.
4 Paper or Cloth
3 MagnoMet or MagnoPad
2 MagnoFix
1 Platen
25
5. MagnoSys and Apex Magnetic Systems 5.1. MagnoPad MagnoPad – Ferromagnetic carrier sheet with non-stick coating
MagnoPad 200 Coated Ferromagnetic carrier sheet for P/C Ø 203 mm 16 20 73 5 89.00 MagnoPad 250 Coated Ferromagnetic carrier sheet for P/C Ø 254 mm 16 25 73 5 115.00 MagnoPad 300 Coated Ferromagnetic carrier sheet for P/C Ø 305 mm 16 30 73 5 135.00 MagnoPad 350 Coated Ferromagnetic carrier sheet for P/C Ø 356 mm 16 35 73 5 164.00
5.2. MagnoMet MagnoMet – Ferromagnetic carrier sheet
MagnoMet 200 Ferromagnetic carrier sheet for paper/cloths Ø 203 mm 16 20 72 5 25.40 MagnoMet 250 Ferromagnetic carrier sheet for paper/cloths Ø 254 mm 16 25 72 5 34.60 MagnoMet 300 Ferromagnetic carrier sheet for paper/cloths Ø 305 mm 16 30 72 5 40.20 MagnoMet 350 Ferromagnetic carrier sheet for paper/cloths Ø 356 mm 16 35 72 5 53.00
5.3. MagnoFix MagnoFix – Magnetic substrate disc to attach to any conventional platen, self-adhesive backing, easy to handle
MagnoFix 200 Magnetic substrate for platen Ø 203 mm (8") 16 20 70 1 14.80 MagnoFix 250 Magnetic substrate for platen Ø 254 mm (10") 16 25 70 1 18.40 MagnoFix 300 Magnetic substrate for platen Ø 305 mm (12") 16 30 70 1 23.80 Magnetic substates with Ø 356 mm (14") is listed under section 5.6 Apex M.
5.4. MagnoDisc MagnoDisc – Magnetic platen
MagnoDisc 200 Aluminium platen with magnetic substrate Ø 203 mm 16 20 71 1 170.00 MagnoDisc 250 Aluminium platen with magnetic substrate Ø 254 mm 16 25 71 1 285.00 MagnoDisc 300 Aluminium platen with magnetic substrate Ø 305 mm 16 30 71 1 290.00
5.5. ApexB ApexB – Bimetallic Disc
ApexB 200 Bimetallic plate for cloth or paper Ø 203 mm 41-2739-208 1 58.00 ApexB 250 Bimetallic plate for cloth or paper Ø 254 mm 41-2739-210 1 82.00 ApexB 300 Bimetallic plate for cloth or paper Ø 305 mm 41-2739-212 1 124.00 ApexB 350 Bimetallic plate for cloth or paper Ø 356 mm 41-2739-214 1 192.00
5.6. ApexM ApexM – Magnetic substrate disc to attach on any conventional platen, self adhesive backing, easy to handle
ApexM 200 Magnetic disc Ø 203 mm (8") 41-2739-608 1 20.60 ApexM 250 Magnetic disc Ø 254 mm (10") 41-2739-610 1 22.20 ApexM 300 Magnetic disc Ø 305 mm (12") 41-2739-612 1 24.40 ApexM 350 Magnetic disc Ø 356 mm (14") 41-2739-614 1 38.80
5.7. ApexHercules H Fine grinding disc for hard ferrous and non-ferrous material (> HRC 20 / HV 236)
ApexHercules H 200 Fine Grinding Disc Ø 203 mm 41-2740-308-001 1 38.20 ApexHercules H 250 Fine Grinding Disc Ø 254 mm 41-2740-310-001 1 53.00 ApexHercules H 300 Fine Grinding Disc Ø 305 mm 41-2740-312-001 1 68.00 ApexHercules H 350 Fine Grinding Disc Ø 356 mm 41-2740-314-001 1 221.00
5.8. ApexHercules S Fine Grinding Disc for soft non-ferrous material (< HRC 20 / HV 236)
ApexHercules S 200 Fine Grinding Disc Ø 203 mm 41-2740-408-001 1 38.20 ApexHercules S 250 Fine Grinding Disc Ø 254 mm 41-2740-410-001 1 53.00 ApexHercules S 300 Fine Grinding Disc Ø 305 mm 41-2740-412-001 1 68.00 ApexHercules S 350 Fine Grinding Disc Ø 356 mm 41-2740-414-001 1 221.00
GR
IND
ING
& P
OLI
SHIN
G
26
5.9 ApexDGD DiamondGrindingDiscs ApexDGD DiamondGrindingDisc 203 mm (8"), with self-adhesive back, for a quick and effective material removal
ApexDGD DiamondGrindingDisc, PSA 165 μm 41-5008 1 73.00 ApexDGD DiamondGrindingDisc, PSA 125 μm 41-5108 1 73.00 ApexDGD DiamondGrindingDisc, PSA 70 μm 41-5208 1 73.00 ApexDGD DiamondGrindingDisc, PSA 45 μm 41-5308 1 73.00 ApexDGD DiamondGrindingDisc, PSA 30 μm 41-5408 1 73.00 ApexDGD DiamondGrindingDisc, PSA 15 μm 41-5508 1 73.00 ApexDGD DiamondGrindingDisc, PSA 9 μm 41-5608 1 73.00 ApexDGD DiamondGrindingDisc, PSA 6 μm 41-5708 1 73.00 ApexDGD DiamondGrindingDisc, PSA 3 μm 41-5808 1 73.00 ApexDGD DiamondGrindingDisc, PSA 0.5 μm 41-5908 1 73.00
ApexDGD DiamondGrindingDisc 254 mm (10"), with self-adhesive back, for a quick and effective material removal
ApexDGD DiamondGrindingDisc, PSA 165 μm 41-5010 1 79.00 ApexDGD DiamondGrindingDisc, PSA 125 μm 41-5110 1 79.00 ApexDGD DiamondGrindingDisc, PSA 70 μm 41-5210 1 79.00 ApexDGD DiamondGrindingDisc, PSA 45 μm 41-5310 1 79.00 ApexDGD DiamondGrindingDisc, PSA 30 μm 41-5410 1 79.00 ApexDGD DiamondGrindingDisc, PSA 15 μm 41-5510 1 79.00 ApexDGD DiamondGrindingDisc, PSA 9 μm 41-5610 1 79.00 ApexDGD DiamondGrindingDisc, PSA 6 μm 41-5710 1 79.00 ApexDGD DiamondGrindingDisc, PSA 3 μm 41-5810 1 79.00 ApexDGD DiamondGrindingDisc, PSA 0.5 μm 41-5910 1 79.00
ApexDGD DiamondGrindingDisc 305 mm (12"), with self-adhesive back, for a quick and effective material removal
ApexDGD DiamondGrindingDisc, PSA 165 μm 41-5012 1 127.00 ApexDGD DiamondGrindingDisc, PSA 125 μm 41-5112 1 127.00 ApexDGD DiamondGrindingDisc, PSA 70 μm 41-5212 1 127.00 ApexDGD DiamondGrindingDisc, PSA 45 μm 41-5312 1 127.00 ApexDGD DiamondGrindingDisc, PSA 30 μm 41-5412 1 127.00 ApexDGD DiamondGrindingDisc, PSA 15 μm 41-5512 1 127.00 ApexDGD DiamondGrindingDisc, PSA 9 μm 41-5612 1 127.00 ApexDGD DiamondGrindingDisc, PSA 6 μm 41-5712 1 127.00 ApexDGD DiamondGrindingDisc, PSA 3 μm 41-5812 1 127.00 ApexDGD DiamondGrindingDisc, PSA 0.5 μm 41-5912 1 127.00
ApexDGD DiamondGrindingDiscs ApexDGD DiamondGrindingDiscs are ideally used as a substitute for SiC paper or other grinding media. Long-life, fixed abrasive provides high removal rates with superb edge retention and flatness. This versatile system works on a wide range of materials such as hard materials, ferrous materials, aluminium, ceramics, glass, thermal spray coatings and more. The surface is durable enough for unmounted specimens. Like your Silicon Carbide papers, just add water for the perparation process.
27
Our MSDS are online:www.buehler.co.uk Click to > Downloads > MSDS
5.10 ApexDGD DiamondGrindingDiscs on MagnoMet carrier ApexDGD DiamondGrindingDisc 203 mm (8"), on MagnoMet, for a quick and effective material removal
ApexDGD-M DiamondGrindingDisc, on MagnoMet 165 μm 41-6008D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 125 μm 41-6108D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 70 μm 41-6208D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 45 μm 41-6308D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 30 μm 41-6408D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 15 μm 41-6508D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 9 μm 41-6608D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 6 μm 41-6708D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 3 μm 41-6808D 1 80.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 0.5 μm 41-6908D 1 80.00
ApexDGD DiamondGrindingDisc 254 mm (10"), on MagnoMet, for a quick and effective material removal
ApexDGD-M DiamondGrindingDisc, on MagnoMet 165 μm 41-6010D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 125 μm 41-6110D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 70 μm 41-6210D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 45 μm 41-6310D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 30 μm 41-6410D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 15 μm 41-6510D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 9 μm 41-6610D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 6 μm 41-6710D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 3 μm 41-6810D 1 88.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 0.5 μm 41-6910D 1 88.00
ApexDGD DiamondGrindingDisc 305 mm (12"), on MagnoMet, for a quick and effective material removal
ApexDGD-M DiamondGrindingDisc, on MagnoMet 165 μm 41-6012D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 125 μm 41-6112D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 70 μm 41-6212D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 45 μm 41-6312D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 30 μm 41-6412D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 15 μm 41-6512D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 9 μm 41-6612D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 6 μm 41-6712D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 3 μm 41-6812D 1 138.00 ApexDGD-M DiamondGrindingDisc, on MagnoMet 0.5 μm 41-6912D 1 138.00
GR
IND
ING
& P
OLI
SHIN
G
28
5.11 ApexDGD Color DiamondGrindingDiscs ApexDGD Color DiamondGrindingDisc 203 mm (8"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD red DiamondGrindingDisc, PSA 75 μm 41-3508 1 98.00 ApexDGD purple DiamondGrindingDisc, PSA 55 μm 41-3608 1 98.00 ApexDGD yellow DiamondGrindingDisc, PSA 35 μm 41-3708 1 98.00 ApexDGD white DiamondGrindingDisc, PSA 15 μm 41-3808 1 98.00 ApexDGD blue DiamondGrindingDisc, PSA 8 μm 41-3908 1 98.00
ApexDGD Color DiamondGrindingDisc 254 mm (10"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD red DiamondGrindingDisc, PSA 75 μm 41-3510 1 119.00 ApexDGD purple DiamondGrindingDisc, PSA 55 μm 41-3610 1 119.00 ApexDGD yellow DiamondGrindingDisc, PSA 35 μm 41-3710 1 119.00 ApexDGD white DiamondGrindingDisc, PSA 15 μm 41-3810 1 119.00 ApexDGD blue DiamondGrindingDisc, PSA 8 μm 41-3910 1 119.00
ApexDGD Color DiamondGrindingDisc 305 mm (12"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD red DiamondGrindingDisc, PSA 75 μm 41-3512 1 176.00 ApexDGD purple DiamondGrindingDisc, PSA 55 μm 41-3612 1 176.00 ApexDGD yellow DiamondGrindingDisc, PSA 35 μm 41-3712 1 176.00 ApexDGD white DiamondGrindingDisc, PSA 15 μm 41-3812 1 176.00 ApexDGD blue DiamondGrindingDisc, PSA 8 μm 41-3912 1 176.00
ApexDGD Color DiamondGrindingDisc 356 mm (14"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD red DiamondGrindingDisc, PSA 75 μm 41-3514 1 282.00 ApexDGD purple DiamondGrindingDisc, PSA 55 μm 41-3614 1 282.00 ApexDGD yellow DiamondGrindingDisc, PSA 35 μm 41-3714 1 282.00 ApexDGD white DiamondGrindingDisc, PSA 15 μm 41-3814 1 282.00 ApexDGD blue DiamondGrindingDisc, PSA 8 μm 41-3914 1 282.00
5.12 ApexDGD Color DiamondGrindingDiscs with MagnoMet Carrier ApexDGD Color DiamondGrindingDisc 203 mm (8"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD-M red DiamondGrindingDisc, on MagnoMet 75 μm 41-4508D 1 104.00 ApexDGD-M purple DiamondGrindingDisc, on MagnoMet 55 μm 41-4608D 1 104.00 ApexDGD-M yellow DiamondGrindingDisc, on MagnoMet 35 μm 41-4708D 1 104.00 ApexDGD-M white DiamondGrindingDisc, on MagnoMet 15 μm 41-4808D 1 104.00 ApexDGD-M blue DiamondGrindingDisc, on MagnoMet 8 μm 41-4908D 1 104.00
ApexDGD Color DiamondGrindingDisc 254 mm (10"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD-M red DiamondGrindingDisc, on MagnoMet 75 μm 41-4510D 1 128.00 ApexDGD-M purple DiamondGrindingDisc, on MagnoMet 55 μm 41-4610D 1 128.00 ApexDGD-M yellow DiamondGrindingDisc, on MagnoMet 35 μm 41-4710D 1 128.00 ApexDGD-M white DiamondGrindingDisc, on MagnoMet 15 μm 41-4810D 1 128.00 ApexDGD-M blue DiamondGrindingDisc, on MagnoMet 8 μm 41-4910D 1 128.00
ApexDGD Color DiamondGrindingDisc 305 mm (12"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD-M red DiamondGrindingDisc, on MagnoMet 75 μm 41-4512D 1 184.00 ApexDGD-M purple DiamondGrindingDisc, on MagnoMet 55 μm 41-4612D 1 184.00 ApexDGD-M yellow DiamondGrindingDisc, on MagnoMet 35 μm 41-4712D 1 184.00 ApexDGD-M white DiamondGrindingDisc, on MagnoMet 15 μm 41-4812D 1 184.00 ApexDGD-M blue DiamondGrindingDisc, on MagnoMet 8 μm 41-4912D 1 184.00
ApexDGD Color DiamondGrindingDisc 356 mm (14"), with self-adhesive backing, general usage, including soft and delicate materials
ApexDGD-M red DiamondGrindingDisc, on MagnoMet 75 μm 41-4514D 1 293.00 ApexDGD-M purple DiamondGrindingDisc, on MagnoMet 55 μm 41-4614D 1 293.00 ApexDGD-M yellow DiamondGrindingDisc, on MagnoMet 35 μm 41-4714D 1 293.00 ApexDGD-M white DiamondGrindingDisc, on MagnoMet 15 μm 41-4814D 1 293.00 ApexDGD-M blue DiamondGrindingDisc, on MagnoMet 8 μm 41-4914D 1 293.00
5.13 Dressing Stick for Diamond Grinding Discs Dressing stick for dressing of diamond grinding discs
Dressing stick for diamond grinding discs 10 90 02 1 5.40
29
6. Grinding, Polishing and Lapping The goal of sample preparation for microstructural analysis is to reveal the true material structure. In order to achieve this goal, one must use methods and products that produce a specimen that has, as much as possible, no deformation or smearing of the sample, good edge retention and planarity, and freedom from scratches, which could confuse microstructural interpretation. All preparation steps, from the initial cut to the final polish must be carefully performed. All steps are equally important and the deformation from one stage must be removed in the subsequent step.
6.1. PlanarMet Planar Grinding Discs Alumina planar grinding surface, self adhesive, long life, very high material removal, particularly suitable for planar grinding with central pressure and/or large sample surfaces
120 Ø 203 mm (8") self adhesive 30-6008-020 20 44.40 120 Ø 254 mm (10") self adhesive 30-6010-020 20 61.00 120 Ø 305 mm (12") self adhesive 30-6012-020 20 100.00
6.2. ZirMet Abrasive Discs Zirconia based abrasive, self adhesive, long lifetime, very high material removal, particularly suitable for planar grinding with central pressure and/or large sample surfaces
Grain size following ANSI/CAMI with self-adhesive back, for platen with Ø 200 mm
80 Ø 200 mm 201 μm 13 20 21 25 50.00 120 Ø 200 mm 106 μm 13 20 23 25 50.00 180 Ø 200 mm 75 μm 13 20 25 25 50.00
Grain size following ANSI/CAMI with self-adhesive back, for platen with Ø 250 mm
80 Ø 250 mm 201 μm 13 25 21 25 79.00 120 Ø 250 mm 106 μm 13 25 23 25 79.00 180 Ø 250 mm 75 μm 13 25 25 25 79.00
Grain size following ANSI/CAMI with self-adhesive back, for platen with Ø 300 mm
60 Ø 300 mm 250 μm 15-5132-060 25 144.00 120 Ø 300 mm 106 μm 15-5132-120 25 144.00 180 Ø 300 mm 75 μm 15-5132-180 25 144.00 220 Ø 300 mm 63 μm 15-5132-220 25 164.00
6.3. UltraPrep Diamond Abrasive Disc Self adhesive grinding discs for all Grinder/Polishers Application: Grinding of ceramics, hard metals and hard materials, planar grinding
For platen with Ø 200 mm
250 μm green metal bonded 14 20 80 1 140.00 125 μm black metal bonded 14 20 81 1 116.00 74 μm red metal bonded 14 20 82 1 82.00 40 μm yellow metal bonded 14 20 83 1 72.00 30 μm White resin bonded 14 20 84 1 72.00 20 μm White metal bonded 14 20 85 1 72.00 10 μm blue resin bonded 14 20 86 1 72.00 2 μm orange resin bonded 14 20 87 1 97.00
For platen with Ø 250 mm
250 μm green metal bonded 14 25 80 1 215.00 125 μm black metal bonded 14 25 81 1 170.00 74 μm red metal bonded 14 25 82 1 144.00 40 μm yellow metal bonded 14 25 83 1 104.00 30 μm White resin bonded 14 25 84 1 104.00 20 μm White metal bonded 14 25 85 1 104.00 10 μm blue resin bonded 14 25 86 1 104.00 2 μm orange resin bonded 14 25 87 1 136.00
For platen with Ø 300 mm
250 μm green metal bonded 14 30 80 1 330.00 125 μm black metal bonded 14 30 81 1 325.00 74 μm red metal bonded 14 30 82 1 237.00 40 μm yellow metal bonded 14 30 83 1 168.00 30 μm White resin bonded 14 30 84 1 168.00 20 μm White metal bonded 14 30 85 1 168.00 10 μm blue resin bonded 14 30 86 1 168.00 2 μm orange resin bonded 14 30 87 1 178.00
GR
IND
ING
& P
OLI
SHIN
G
30
6.4. Silicon Carbide Abrasive Paper The BuehlerMet line of Silicon Carbide abrasive discs have been developed for laboratory grinding of metallographic and petrographic samples. These papers utilize a uniformly graded abrasive coating for consistent rapid material removal and uniform finish. BuehlerMet discs can be used wet or dry and the uniformity and consistency of these discs make them an excellent choice for manual or automated grinding applications. The tightly held abrasive grain sizing gives BuehlerMet abrasive papers the ability to reduce subsequent grinding and polishing times.
6.4.1. BuehlerMet Silicon Carbide Abrasive Paper Ø 200 mm (8") Ø 200 mm Standard quality, plain, grit size FEPA P 60 Silicon Carbide 269 μm 30-5208-060 100 34.00 P 80 Silicon Carbide 201 μm 30-5208-080 100 30.20 P 120 Silicon Carbide 127 μm 30-5208-120 100 27.60 P 180 Silicon Carbide 78 μm 30-5208-180 100 23.80 P 240 Silicon Carbide 58 μm 30-5208-240 100 23.80 P 320 Silicon Carbide 46 μm 30-5208-320 100 23.80 P 400 Silicon Carbide 35 μm 30-5208-400 100 23.80 P 600 Silicon Carbide 26 μm 30-5208-600 100 23.80 P 800 Silicon Carbide 22 μm 30-5208-800 100 23.80 P 1000 Silicon Carbide 18 μm 30-5208-010 100 23.80 P 1200 Silicon Carbide 15 μm 30-5208-012 100 23.80 P 2500 Silicon Carbide 10 μm 30-5208-025 100 36.00 P 4000 Silicon Carbide 5 μm 30-5208-040 100 61.00
P 60 Silicon Carbide 269 μm 30-5208-060-025 25 9.00 P 80 Silicon Carbide 201 μm 30-5208-080-050 50 15.60 P 120 Silicon Carbide 127 μm 30-5208-120-050 50 14.40
6.4.2. BuehlerMet Silicon Carbide Abrasive Paper Ø 200 mm (8") PSA Ø 200 mm Standard quality self-adhesive, grit size FEPA P 60 Silicon Carbide 269 μm 30-5218-060 100 54.00 P 80 Silicon Carbide 201 μm 30-5218-080 100 50.00 P 120 Silicon Carbide 127 μm 30-5218-120 100 43.00 P 180 Silicon Carbide 78 μm 30-5218-180 100 38.20 P 240 Silicon Carbide 58 μm 30-5218-240 100 38.20 P 320 Silicon Carbide 46 μm 30-5218-320 100 38.20 P 400 Silicon Carbide 35 μm 30-5218-400 100 38.20 P 600 Silicon Carbide 26 μm 30-5218-600 100 38.20 P 800 Silicon Carbide 22 μm 30-5218-800 100 38.20 P 1000 Silicon Carbide 18 μm 30-5218-010 100 41.40 P 1200 Silicon Carbide 15 μm 30-5218-012 100 38.20 P 2500 Silicon Carbide 10 μm 30-5218-025 100 52.00
P 60 Silicon Carbide 269 μm 30-5218-060-025 25 14.00 P 80 Silicon Carbide 201 μm 30-5218-080-050 50 26.00 P 120 Silicon Carbide 127 μm 30-5218-120-050 50 22.20 P 180 Silicon Carbide 78 μm 30-5218-180-050 50 19.80 P 240 Silicon Carbide 58 μm 30-5218-240-050 50 19.80
The P4000 grit is only available with plain backing! Please use our Metgrip Liners or spray adhesive to create a self-adhesive version of P4000.
Ø 203 mm MicroCut fine grinding non-adhesive, grit size FEPA
P 1200 Silicon Carbide 15 μm 13 20 16 50 43.00
31
6.4.3. BuehlerMet Silicon Carbide Abrasive Paper Ø 230 mm (9") Ø 230 mm Standard quality, plain, grit size FEPA P 60 Silicon Carbide 269 μm 30-5223-060 100 43.00 P 80 Silicon Carbide 201 μm 30-5223-080 100 37.00 P 120 Silicon Carbide 127 μm 30-5223-120 100 32.00 P 180 Silicon Carbide 78 μm 30-5223-180 100 29.20 P 240 Silicon Carbide 58 μm 30-5223-240 100 29.20 P 320 Silicon Carbide 46 μm 30-5223-320 100 29.20 P 400 Silicon Carbide 35 μm 30-5223-400 100 29.20 P 600 Silicon Carbide 26 μm 30-5223-600 100 29.20 P 800 Silicon Carbide 22 μm 30-5223-800 100 29.20 P 1000 Silicon Carbide 18 μm 30-5223-010 100 29.20 P 1200 Silicon Carbide 15 μm 30-5223-012 100 29.20 P 2500 Silicon Carbide 10 μm 30-5223-025 100 44.40 P 4000 Silicon Carbide 5 μm 30-5223-040 100 77.00
P 60 Silicon Carbide 269 μm 30-5223-060-025 25 11.20 P 80 Silicon Carbide 201 μm 30-5223-080-050 50 19.40 P 120 Silicon Carbide 127 μm 30-5223-120-050 50 16.40
Papers of Ø 230 mm are only available with plain backing! Please use our Metgrip Liners or spray adhesive to create a self-adhesive version.
Ø 229 mm MicroCut fine grinding non-adhesive, grit size FEPA
P 1200 Silicon Carbide 15 μm 13 23 16 50 65.00
USA / European Equivalency Grit Guide
FEPA and ANSI/CAMI and mean grainsize FEPA Grainsize ANSI/CAMI Grainsizee
P60 269 μm 60 268 μm
P80 201 μm 80 188 μm
P120 127 μm 120 116 μm
P180 78 μm 180 78 μm
P240 58 μm
240 52 μm
P320 46 μm
P400 35 μm 320 34 μm
P600 26 μm
P800 22 μm 400 22 μm
P1000 18 μm 500 18 μm
P1200 15 μm 600 15 μm
P2500 8 μm
1200 6,5 μm
P4000 5 μm
GR
IND
ING
& P
OLI
SHIN
G
32
6.4.4. BuehlerMet Silicon Carbide Abrasive Paper Ø 250 mm (10") Ø 250 mm Standard quality, plain, grit size FEPA P 60 Silicon Carbide 269 μm 30-5228-060 100 53.00 P 80 Silicon Carbide 201 μm 30-5228-080 100 48.80 P 120 Silicon Carbide 127 μm 30-5228-120 100 38.80 P 180 Silicon Carbide 78 μm 30-5228-180 100 35.00 P 240 Silicon Carbide 58 μm 30-5228-240 100 35.00 P 320 Silicon Carbide 46 μm 30-5228-320 100 35.00 P 400 Silicon Carbide 35 μm 30-5228-400 100 35.00 P 600 Silicon Carbide 26 μm 30-5228-600 100 35.00 P 800 Silicon Carbide 22 μm 30-5228-800 100 35.00 P 1000 Silicon Carbide 18 μm 30-5228-010 100 35.00 P 1200 Silicon Carbide 15 μm 30-5228-012 100 35.00 P 2500 Silicon Carbide 10 μm 30-5228-025 100 48.20 P 4000 Silicon Carbide 5 μm 30-5228-040 100 103.00
P 60 Silicon Carbide 269 μm 30-5228-060-025 25 13.80 P 80 Silicon Carbide 201 μm 30-5228-080-050 50 25.40 P 120 Silicon Carbide 127 μm 30-5228-120-050 50 20.20
6.4.5. BuehlerMet Silicon Carbide Abrasive Paper Ø 250 mm (10") PSA Ø 250 mm Standard quality self-adhesive, grit size FEPA P 60 Silicon Carbide 269 μm 30-5229-060 100 92.00 P 80 Silicon Carbide 201 μm 30-5229-080 100 88.00 P 120 Silicon Carbide 127 μm 30-5229-120 100 72.00 P 180 Silicon Carbide 78 μm 30-5229-180 100 63.00 P 240 Silicon Carbide 58 μm 30-5229-240 100 63.00 P 320 Silicon Carbide 46 μm 30-5229-320 100 63.00 P 400 Silicon Carbide 35 μm 30-5229-400 100 63.00 P 600 Silicon Carbide 26 μm 30-5229-600 100 63.00 P 800 Silicon Carbide 22 μm 30-5229-800 100 63.00 P 1000 Silicon Carbide 18 μm 30-5229-010 100 60.00 P 1200 Silicon Carbide 15 μm 30-5229-012 100 63.00 P 2500 Silicon Carbide 10 μm 30-5229-025 100 80.00
P 60 Silicon Carbide 269 μm 30-5229-060-025 25 23.60 P 80 Silicon Carbide 201 μm 30-5229-080-050 50 45.00 P 120 Silicon Carbide 127 μm 30-5229-120-050 50 37.20 P 180 Silicon Carbide 78 μm 30-5229-180-050 50 32.60 P 240 Silicon Carbide 58 μm 30-5229-240-050 50 32.60
The grit P4000 is only available with plain backing! Please use our Metgrip Liners or spray adhesive to create a self-adhesive version of P4000.
Ø 254 mm MicroCut fine grinding non-adhesive, grit size FEPA
P 1200 Silicon Carbide 15 μm 13 25 16 50 65.00
The Mechanical Preparation Mechanical preparation is the most usual procedure to prepare samples for microscopic evaluation. The goal of sample preparation is to reveal the true structure of the material. The preparation should be accomplished systematically and according to reproducible methods.
Grinding
The cutting process results in mechanical deformation below the sample surface. This deformation must be removed by subsequent preparation steps. The first grinding step is generally the planar grinding stage. With manual preparation, the sample should be turned 90 degrees after each stage. This is done until the grinding marks from the previous step are no longer visible. In the case of semi or fully automatic sample preparation, the change of direction results from the relative motion of the platen and the sample holder. When moving to the next step, the selection of the different abrasive size is very important. As a rule the next step consists of a Silicon Carbide paper that has half the grit size of the proceeding one, e.g. in each case P120 - P320 - P600 - P1200.
After performing these steps correctly, the remaining surface deformation can be removed with a brief step using a fine diamond abrasive on soft plane cloths. With very soft or tough materials grades up to P2500 or P4000 should be used. Alternatively, grinding cloths can be used that utilise fine diamonds to achieve the grinding steps. The abrasion is moderate and the scratch pattern finer than with comparable Silicon Carbide paper.
33
6.4.6. BuehlerMet Silicon Carbide Abrasive Paper Ø 305 mm (12") Ø 305 mm Standard quality, plain, grit size FEPA P 60 Silicon Carbide ca 269 μm 30-5232-060 100 70.00 P 80 Silicon Carbide ca 201 μm 30-5232-080 100 56.00 P 120 Silicon Carbide ca 127 μm 30-5232-120 100 48.80 P 180 Silicon Carbide 78 μm 30-5232-180 100 44.40 P 240 Silicon Carbide 58 μm 30-5232-240 100 44.40 P 320 Silicon Carbide 46 μm 30-5232-320 100 44.40 P 400 Silicon Carbide 35 μm 30-5232-400 100 44.40 P 600 Silicon Carbide 26 μm 30-5232-600 100 44.40 P 800 Silicon Carbide 22 μm 30-5232-800 100 44.40 P 1000 Silicon Carbide 18 μm 30-5232-010 100 44.40 P 1200 Silicon Carbide 15 μm 30-5232-012 100 44.40 P 2500 Silicon Carbide 10 μm 30-5232-025 100 71.00 P 4000 Silicon Carbide 5 μm 30-5232-040 100 145.00
P 60 Silicon Carbide ca 269 μm 30-5232-060 25 18.60 P 80 Silicon Carbide ca 201 μm 30-5232-080 50 29.00 P 120 Silicon Carbide ca 127 μm 30-5232-120 50 25.60
6.4.7. BuehlerMet Silicon Carbide Abrasive Paper Ø 305 mm (12") PSA Ø 305 mm Standard quality self-adhesive, grit size FEPA P 60 Silicon Carbide 269 μm 30-5233-060 100 108.00 P 80 Silicon Carbide 201 μm 30-5233-080 100 104.00 P 120 Silicon Carbide 127 μm 30-5233-120 100 98.00 P 180 Silicon Carbide 78 μm 30-5233-180 100 82.00 P 240 Silicon Carbide 58 μm 30-5233-240 100 82.00 P 320 Silicon Carbide 46 μm 30-5233-320 100 82.00 P 400 Silicon Carbide 35 μm 30-5233-400 100 82.00 P 600 Silicon Carbide 26 μm 30-5233-600 100 82.00 P 800 Silicon Carbide 22 μm 30-5233-800 100 82.00 P 1000 Silicon Carbide 18 μm 30-5233-010 100 82.00 P 1200 Silicon Carbide 15 μm 30-5233-012 100 82.00 P 2500 Silicon Carbide 10 μm 30-5233-025 100 104.00
P 60 Silicon Carbide 269 μm 30-5233-060 25 28.00 P 80 Silicon Carbide 201 μm 30-5233-080 50 54.00 P 120 Silicon Carbide 127 μm 30-5233-120 50 51.00 P 180 Silicon Carbide 78 μm 30-5233-180 50 42.80 P 240 Silicon Carbide 58 μm 30-5233-240 50 42.80
The P4000 grit is only available with plain backing! Please use our Metgrip Liners or Spray adhesive to create a self-adhesive version of P4000.
6.4.8. BuehlerMet Silicon Carbide Abrasive Paper Ø 350 mm (14") Ø 350 mm Standard quality, plain, grit size FEPA P 60 Silicon Carbide 269 μm 13 35 00 100 143.00 P 120 Silicon Carbide 127 μm 13 35 03 100 112.00 P 180 Silicon Carbide 78 μm 13 35 05 100 94.00 P 240 Silicon Carbide 58 μm 13 35 07 100 94.00 P 320 Silicon Carbide 46 μm 13 35 09 100 94.00 P 600 Silicon Carbide 26 μm 13 35 12 100 94.00 P 800 Silicon Carbide 22 μm 13 35 13 100 94.00 P1200 Silicon Carbide 15 μm 13 35 15 100 94.00
Paper with Ø 350 mm is only available with plain backing! Use our Metgrip Liners or spray adhesive to create a self-adhesive version.
The Mechanical Preparation (continued)
Grinding usually takes place with Silicon Carbide papers on rotating discs with continuous water flushing. The wet grinding reduces frictional heat, dust formation and washes away abrasion debris. Buehler offers abrasives for all grinding procedures: The most common abrasive type in use for grinding most materials is Silicon Carbide paper. They are available in diameters of 200, 230, 250, 300 and 350 mm and in the grades of P60 to P4000, with and without adhesive backing.
PlanarMet planar grinding discs utilise Alumina abrasives, and ZirMet with Zirconia abrasives exhibit a higher hardness and a substantially better abrasion rate than Silicon Carbide paper. They are therefore particularly suitable for the planar grinding stage with semi and fully automatic
preparation machines. Their longer life, in comparison to Silicon Carbide abrasive, reduces the number of papers used.
UltraPrep diamond discs are used for all materials with high to very high hardness. The long life of the surface allows savings of consumables even if a set of discs has a comparatively high initial price.
Instead of the classical grinding with fixed abrasive papers, grinding can also be performed with hard polishing surfaces (TexMet P or Ultra-cloths) and diamonds of 45 μm to 6 μm. This has the advantage that with semi and fully automatic preparation equipment, abrasives can be continuously dosed onto the cloth.
GR
IND
ING
& P
OLI
SHIN
G
34
6.4.9. CarbiMet Silicon Carbide Abrasive Paper Ø 203 mm (8") Ø 203 mm (8") high quality CarbiMet, plain, grit size ANSI/CAMI 60 (P60) Silicon Carbide 268 μm 30-5108-060-100 100 97.00 120 (P120) Silicon Carbide 116 μm 30-5108-120-100 100 64.00 180 (P180) Silicon Carbide 75 μm 30-5108-180-100 100 60.00 240 (P280) Silicon Carbide 52 μm 30-5108-240-100 100 60.00 320 (P400) Silicon Carbide 35 μm 30-5108-320-100 100 60.00 400 (P800) Silicon Carbide 22 μm 30-5108-400-100 100 60.00 600 (P1200) Silicon Carbide 15 μm 30-5108-600-100 100 60.00
Ø 203 mm (8") high quality CarbiMet, self-adhesive backed, grit size ANSI/CAMI 120 (P120) Silicon Carbide 116 μm 30-5118-120-100 100 114.00 180 (P180) Silicon Carbide 75 μm 30-5118-180-100 100 99.00 240 (P280) Silicon Carbide 52 μm 30-5118-240-100 100 99.00 320 (P400) Silicon Carbide 35 μm 30-5118-320-100 100 99.00 400 (P800) Silicon Carbide 22 μm 30-5118-400-100 100 99.00 600 (P1200) Silicon Carbide 15 μm 30-5118-600-100 100 99.00
6.4.10. CarbiMet Silicon Carbide Abrasive Paper Ø 254 mm (10") Ø 254 mm high quality CarbiMet, plain, grit size ANSI/CAMI 60 (P60) Silicon Carbide 268 μm 30-5125-1-060-100 100 128.00 120 (P120) Silicon Carbide 116 μm 30-5125-1-120-100 100 111.00 180 (P180) Silicon Carbide 75 μm 30-5125-1-180-100 100 98.00 240 (P280) Silicon Carbide 52 μm 30-5125-1-240-100 100 98.00 320 (P400) Silicon Carbide 35 μm 30-5125-1-320-100 100 98.00 400 (P800) Silicon Carbide 22 μm 30-5125-1-400-100 100 98.00 600 (P1200) Silicon Carbide 15 μm 30-5125-1-600-100 100 98.00
Ø 254 mm high quality CarbiMet, self-adhesive backed, grit size ANSI/CAMI 120 (P120) Silicon Carbide 116 μm 30-5125-3-120-100 100 182.00 180 (P180) Silicon Carbide 75 μm 30-5125-3-180-100 100 157.00 240 (P280) Silicon Carbide 52 μm 30-5125-3-240-100 100 157.00 320 (P400) Silicon Carbide 35 μm 30-5125-3-320-100 100 157.00 400 (P800) Silicon Carbide 22 μm 30-5125-3-400-100 100 157.00 600 (P1200) Silicon Carbide 15 μm 30-5125-3-600-100 100 157.00 800 (P1500) Silicon Carbide 12 μm 30-5125-3-800-100 100 252.00 1200 (P2500) Silicon Carbide 5 μm 30-5125-3-012-100 100 252.00
6.4.11. CarbiMet Silicon Carbide Abrasive Paper Ø 305 mm (12")
Ø 305 mm (12") high quality CarbiMet, plain, grit size ANSI/CAMI 60 (P60) Silicon Carbide 268 μm 30-5121-060-100 100 185.00 120 (P120) Silicon Carbide 116 μm 30-5121-120-100 100 145.00 180 (P180) Silicon Carbide 75 μm 30-5121-180-100 100 126.00 240 (P280) Silicon Carbide 52 μm 30-5121-240-100 100 126.00 320 (P400) Silicon Carbide 35 μm 30-5121-320-100 100 126.00 400 (P800) Silicon Carbide 22 μm 30-5121-400-100 100 126.00 600 (P1200) Silicon Carbide 15 μm 30-5121-600-100 100 126.00
Ø 305 mm (12") high quality CarbiMet, self-adhesive backed, grit size ANSI/CAMI 60 (P60) Silicon Carbide 268 μm 15-5112-060-100 100 282.00 120 (P120) Silicon Carbide 116 μm 15-5112-120-100 100 249.00 180 (P180) Silicon Carbide 75 μm 15-5112-180-100 100 224.00 240 (P280) Silicon Carbide 52 μm 30-5112-240-100 100 224.00 320 (P400) Silicon Carbide 35 μm 30-5112-320-100 100 224.00 400 (P800) Silicon Carbide 22 μm 30-5112-400-100 100 224.00 600 (P1200) Silicon Carbide 15 μm 30-5112-600-100 100 224.00
Ø 73 mm high quality CarbiMet, self-adhesive backed for MiniMet, see section 10.1.
The Mechanical Preparation (continued)
CarbiMet Abrasive Discs are a premium line of metallographic grinding papers designed for superior grinding performance on all types of metallographic samples. These discs are designed for wet or dry grinding of samples. The tightly held abrasive grain sizing gives CarbiMet Abrasive papers the rapid material removal and uniform finish needed to reduce rough and final polishing times. The uniformity and consistency of these discs make them an excellent choice for use with automatic
grinding and polishing systems. CarbiMet Discs all utilize premium “C” weight papers and are available with a special pressure sensitive adhesive backing which firmly holds the disc in place during use, but still allows easy residue free removal when disc has expired.
35
6.4.12. MetGrip Liners and Spray Adhesive MetGrip Liners, double-sided adhesive disc for plain backed grinding paper, reusable
MetGrip Liners Ø 203 mm 30-7508D 10 20.60 MetGrip Liners Ø 230 mm 30-7509D 10 24.00 MetGrip Liners Ø 254 mm 30-7510D 10 26.00 MetGrip Liners Ø 305 mm 30-7512D 10 33.00 MetGrip Liners Ø 350 mm 30-7514D 10 38.00
Spraying adhesive for silicon carbide papers without adhesive back
Spray adhesive 13 90 05 500 mL 14.00
6.5. Abrasive Belts, Sheets and Rolls 6.5.1. Abrasive Belts, Silicon Carbide, standard quality Wet and dry use, grit size FEPA, for SurfMet, DuoMet, BS Belt Grinders
P80 Silicon Carbide 120 x 920 mm 13 50 01 10 39.40 P120 Silicon Carbide 120 x 920 mm 13 50 03 10 37.80
Wet and dry use, grit size FEPA, for SurfMet, DuoMet, BS Belt Grinders
P80 Silicon Carbide 100 x 915 mm 13 51 01 10 32.40 P120 Silicon Carbide 100 x 915 mm 13 51 03 10 26.60 P180 Silicon Carbide 100 x 915 mm 13 51 05 10 26.60 P240 Silicon Carbide 100 x 915 mm 13 51 07 10 26.60 P400 Silicon Carbide 100 x 915 mm 13 51 10 10 26.60
6.5.2. CarbiMet Abrasive Belts, Silicon Carbide Wet and dry use, grit size ANSI/CAMI, for SurfMet, DuoMet, BS Belt Grinders
80 Silicon Carbide 102 x 914 mm 16-5200-080-010 10 37.40 120 Silicon Carbide 102 x 914 mm 16-5200-120-010 10 34.20 180 Silicon Carbide 102 x 914 mm 16-5200-180-010 10 34.20 240 Silicon Carbide 102 x 914 mm 16-5200-240-010 10 34.20
6.5.3. ZirMet Abrasive Belts, Zirconia Alumina Wet and dry use, grit size ANSI/CAMI, for SurfMet, DuoMet, BS Belt Grinders
60 Zirconia 102 x 914 mm 16-5400-060-005 5 64.00 120 Zirconia 102 x 914 mm 16-5400-120-005 5 58.00 180 Zirconia 102 x 914 mm 16-5400-180-005 5 58.00 220 Zirconia 102 x 914 mm 16-5400-220-005 5 58.00
6.5.4. Abrasive Rolls for Manual Equipment, Silicon Carbide Standard quality, grit size FEPA for most roll grinders
P120 Silicon Carbide 76 mm x 23 m 30-5243-120 1 14.00 P320 Silicon Carbide 76 mm x 23 m 30-5243-320 1 14.00 P600 Silicon Carbide 76 mm x 23 m 30-5243-600 1 14.00 P800 Silicon Carbide 76 mm x 23 m 30-5243-800 1 14.00
6.5.5. CarbiMet Abrasive Rolls, Silicon Carbide Grit size ANSI/CAMI, for HandiMet 2
240 Silicon Carbide 87.1mm x 18.3 m 30-5143-240-001 1 36.00 320 Silicon Carbide 87.1mm x 18.3 m 30-5143-320-001 1 36.00 400 Silicon Carbide 87.1mm x 18.3 m 30-5143-400-001 1 36.00 600 Silicon Carbide 87.1mm x 18.3 m 30-5143-600-001 1 36.00
6.5.6. CarbiMet Abrasive Rolls, Silicon Carbide Grit size ANSI/CAMI, for SurfMet 2, DuoMet and other belt grinders
60 Silicon Carbide 102mm x 23 m 30-5144-060 1 65.00 120 Silicon Carbide 102mm x 23 m 30-5144-120 1 65.00 180 Silicon Carbide 102mm x 46 m 30-5144-180 1 66.00
GR
IND
ING
& P
OLI
SHIN
G
36
6.5.7. CarbiMet Abrasive Strips, Silicon Carbide Grit size ANSI/CAMI, for HandiMet, self-adhesive backed
240 Silicon Carbide 76.2 x 279 mm 30-5160-240 100 52.00 320 Silicon Carbide 76.2 x 279 mm 30-5160-320 100 52.00 400 Silicon Carbide 76.2 x 279 mm 30-5160-400 100 52.00 600 Silicon Carbide 76.2 x 279 mm 30-5160-600 100 52.00 Set 240-600 Silicon Carbide 76.2 x 279 mm 30-5162 40 29.60
6.6. Abrasive Powders Silicon carbide and alumina abrasives are available in various abrasive sizes. These may, at times, be preferred for fine lapping or grinding of samples on various surfaces such as cast iron, tin, lead, or cloth covered wheels. The powders are generally dispersed in distilled water and can vary in consistency from a thin liquid to a paste – like slurry depending upon the powder-to-water ratio.
6.6.1. Silicon Carbide Powder Grit size ANSI/CAMI
120 (P120) Silicon Carbide Powder 40-6400-120-080 2.3 kg 37.00 240 (P240) Silicon Carbide Powder 40-6405-240-080 2.3 kg 37.60 320 (P320) Silicon Carbide Powder 40-6407-320-080 2.3 kg 52.00 400 (P800) Silicon Carbide Powder 40-6410-400-080 2.3 kg 54.00 600 (P1200) Silicon Carbide Powder 40-6415-600-080 2.3 kg 82.00 1000 (P2500) Silicon Carbide Powder 40-6418-000-080 2.3 kg 166.00
6.6.2. Alumina Powder Grit size ANSI/CAMI
240 (P240) Alumina Powder 40-6420-240-080 2.3 kg 35.00 400 (P800) Alumina Powder 40-6425-400-080 2.3 kg 42.40 600 (P1200) Alumina Powder 40-6430-600-080 2.3 kg 49.80
Grain size
25.0 μm Alumina Powder 40-6625-250-080 2.3 kg 49.80 22.5 μm Alumina Powder 40-6622-225-080 2.3 kg 53.00 20.0 μm Alumina Powder 40-6620-200-080 2.3 kg 51.00 17.5 μm Alumina Powder 40-6617-175-080 2.3 kg 49.80 14.5 μm Alumina Powder 40-6614-145-080 2.3 kg 49.80 12.5 μm Alumina Powder 40-6612-125-080 2.3 kg 55.00 9.5 μm Alumina Powder 40-6609-095-080 2.3 kg 55.00 5.0 μm Alumina Powder 40-6605-050-080 2.3 kg 62.00 3.0 μm Alumina Powder 40-6603-030-080 2.3 kg 62.00
MetaDi Diamond Products
The sharp edges of monocrystalline diamonds of the MetaDi suspension ensure a clean surface. 45 μm Diamond in the SEM 450x (below)
Polycrystalline diamonds like MetaDi Supreme have a greater number of cutting facets. This offers a particularly high material removal rate and scratch-free surfaces. 45 μm Diamond in the SEM 450x (left)
Comparison of the removal rate MetaDi + MetaDi Supreme
MetaDi mono Supreme
37
7. Diamond Polishing Products 7.1. MetaDi Supreme Diamond Suspension, polycrystalline Water-based, free of solvents, high diamond concentration, tight distribution of diamond grain size, very high removal rate
in 240 mL plastic bottle with spray nozzle
0.05 μm Diamond Suspension black 40-6627 240 mL 52.00 0.10 μm Diamond Suspension black 40-6628 240 mL 52.00 0.25 μm Diamond Suspension grey 40-6629 240 mL 52.00 1 μm Diamond Suspension blue 40-6630F 240 mL 45.60 3 μm Diamond Suspension green 40-6631F 240 mL 45.60 6 μm Diamond Suspension yellow 40-6632 240 mL 45.60 9 μm Diamond Suspension red 40-6633 240 mL 49.80 15 μm Diamond Suspension brown 40-6634 240 mL 49.80 30 μm Diamond Suspension orange 40-6635 240 mL 49.80 45 μm Diamond Suspension purple 40-6636 240 mL 49.80
in 950 mL plastic bottle (refill bottle)
1 μm Diamond Suspension blue 40-6630F-032 950 mL 115.00 3 μm Diamond Suspension green 40-6631F-032 950 mL 115.00 6 μm Diamond Suspension yellow 40-6632-032 950 mL 115.00 9 μm Diamond Suspension red 40-6633-032 950 mL 123.00 15 μm Diamond Suspension brown 40-6634-032 950 mL 123.00
in 3.8 L plastic bottle (refill bottle) 0.05 μm Diamond Suspension black 40-6627-128 3.8 L 564.00 0.10 μm Diamond Suspension black 40-6628-128 3.8 L 564.00 0.25 μm Diamond Suspension grey 40-6629-128 3.8 L 564.00 1 μm Diamond Suspension blue 40-6630F-128 3.8 L 421.00 3 μm Diamond Suspension green 40-6631F-128 3.8 L 421.00 6 μm Diamond Suspension yellow 40-6632-128 3.8 L 421.00 9 μm Diamond Suspension red 40-6633-128 3.8 L 449.00 15 μm Diamond Suspension brown 40-6634-128 3.8 L 449.00
7.2. MetaDi Supreme DF Diamond Suspension, polycrystalline, dye free Water-based, dye fee, free of solvents, high diamond concentration, tight distribution of diamond grain size, very high removal rate
in 240 mL plastic bottle with spray nozzle
1 μm Diamond Suspension (package code: blue) 40-6730F 240 mL 45.60 3 μm Diamond Suspension (package code: green) 40-6731F 240 mL 45.60 6 μm Diamond Suspension (package code: yellow) 40-6732 240 mL 45.60 9 μm Diamond Suspension (package code: red) 40-6733 240 mL 49.80 15 μm Diamond Suspension (package code: brown) 40-6734 240 mL 49.80
in 950 mL plastic bottle (refill bottle)
1 μm Diamond Suspension (package code: blue) 40-6730F-032 950 mL 115.00 3 μm Diamond Suspension (package code: green) 40-6731F-032 950 mL 115.00 6 μm Diamond Suspension (package code: yellow) 40-6732-032 950 mL 115.00 9 μm Diamond Suspension (package code: red) 40-6733-032 950 mL 123.00 15 μm Diamond Suspension (package code: brown) 40-6734-032 950 mL 123.00
in 3.8 L plastic bottle (refill bottle) 1 μm Diamond Suspension (package code: blue) 40-6730F-128 3.8 L 421.00 3 μm Diamond Suspension (package code: green) 40-6731F-128 3.8 L 421.00 6 μm Diamond Suspension (package code: yellow) 40-6732-128 3.8 L 421.00 9 μm Diamond Suspension (package code: red) 40-6733-128 3.8 L 449.00 15 μm Diamond Suspension (package code: brown) 40-6734-128 3.8 L 449.00
GR
IND
ING
& P
OLI
SHIN
G
Our MSDS are online:www.buehler.co.uk Click to > Downloads > MSDS
38
7.3. MetaDi Diamond Suspension, monocrystalline Water-based, free of solvents, high diamond concentration, tight distribution of diamond grain size
in 470 mL plastic bottle with spray nozzle
1 μm Diamond Suspension blue 40-6530 470 mL 45.60 3 μm Diamond Suspension green 40-6531 470 mL 45.60 6 μm Diamond Suspension yellow 40-6532 470 mL 55.00 9 μm Diamond Suspension red 40-6533 470 mL 61.00 15 μm Diamond Suspension brown 40-6534 470 mL 61.00
in 950 mL plastic bottle (refill bottle) 1 μm Diamond Suspension blue 40-6530-032 950 mL 82.00 3 μm Diamond Suspension green 40-6531-032 950 mL 82.00 6 μm Diamond Suspension yellow 40-6532-032 950 mL 101.00 9 μm Diamond Suspension red 40-6533-032 950 mL 111.00 15 μm Diamond Suspension brown 40-6534-032 950 mL 111.00
in 3.8 L plastic bottle (refill bottle) 1 μm Diamond Suspension blue 40-6530-128 3.8 L 270.00 3 μm Diamond Suspension green 40-6531-128 3.8 L 270.00 6 μm Diamond Suspension yellow 40-6532-128 3.8 L 330.00 9 μm Diamond Suspension red 40-6533-128 3.8 L 344.00 15 μm Diamond Suspension brown 40-6534-128 3.8 L 344.00
7.4. MetaDi Combo Diamond Suspension plus Extender, monocrystallineDiamond Suspension and Extender IN ONE, tight distribution of diamond grain size. Designed only for use with dispensing systems
in 950 mL plastic bottle (refill bottle)
1 μm Diamond Suspension grey + Extender 40-5530-032 950 mL 38.00 3 μm Diamond Suspension grey + Extender 40-5531-032 950 mL 38.00 6 μm Diamond Suspension grey + Extender 40-5532-032 950 mL 44.60 9 μm Diamond Suspension grey + Extender 40-5534-032 950 mL 46.40 15 μm Diamond Suspension grey + Extender 40-5535-032 950 mL 46.40
7.5. MetaDi Diamond Suspension monocrystalline, oil-baseOil based, high diamond concentration, tight distribution of diamond grain size, particularly suitable for soft and water-sensitive materials, absolute water-free!
in 470 mL plastic bottle with spray nozzle
0.25 μm Diamond Suspension grey 40-6539 470 mL 73.00 1 μm Diamond Suspension blue 40-6540 470 mL 37.60 3 μm Diamond Suspension green 40-6541 470 mL 55.00 6 μm Diamond Suspension yellow 40-6542 470 mL 60.00 9 μm Diamond Suspension red 40-6543 470 mL 66.00 15 μm Diamond Suspension brown 40-6544 470 mL 66.00
MetaDi Diamond Products MetaDi diamond products have been used in materials preparation for many decades due to their ability to grind a wide range of materials. With any abrasive for sample preparation, close tolerance of the grain size is very important. If there are diamonds that deviate from the target grain size, the large grains cause deep scratches and the smaller ones have a lower cutting rate and extend the preparation process. MetaDi products are characterized by a particularly close tolerance to the indicated grain size and thus offer optimal preparation characteristics. A consistent concentration of the diamonds ensures reproducible results and a high surface quality with short preparation times and therefore represents good value for money. MetaDi diamond pastes can be supplied with natural or synthetic diamonds. Diamonds that exhibit sharp edges due to their crystalline structure offer good cutting capabilities and a reduced roughness of the prepared sample surface. MetaDi diamond suspensions are the most environmentally safe and problem-free in use. They
contain synthetic, monocrystalline diamonds and are available in two bases: as environmental safe suspension in a water base for general use, or as suspension in an oil base, for soft or water-sensitive samples. MetaDi Supreme is manufactured as a water base suspension, but with polycrystalline-based diamonds. These have the advantage that the surface presents a lot of sharp edges. Polycrystalline diamonds have a high removal rate and grind more effectively than monocrystalline diamonds. MetaDi Supreme is the product of choice for most materials. Because the higher cutting rate results in shorter preparation times and longer cloth life, the actual cost of using MetaDi Supreme is lower and the quality of the cross section is higher. With all MetaDi diamond suspensions, the composition, the viscosity of the suspension and the concentration of diamond are always correct. The suspensions are stand-alone products and equipped with an environmentally safe spraying system
39
7.6. MetaDi Diamond Paste Natural Diamond, monocrystalline, high diamond concentration, tight distribution of diamond grain size, in plastic syringe 0.25 μm Diamond Paste grey 40-6112 5 g 14.80 0.25 μm Diamond Paste grey 40-6102 20 g 57.00 1 μm Diamond Paste blue 40-6138 5 g 11.20 1 μm Diamond Paste blue 40-6128 20 g 41.80 3 μm Diamond Paste green 40-6152 5 g 18.60 3 μm Diamond Paste green 40-6142 20 g 70.00 6 μm Diamond Paste yellow 40-6172 5 g 18.60 6 μm Diamond Paste yellow 40-6162 20 g 70.00 9 μm Diamond Paste red 40-6192 5 g 24.40 9 μm Diamond Paste red 40-6182 20 g 96.00 15 μm Diamond Paste brown 40-6212 5 g 24.40 15 μm Diamond Paste brown 40-6202 20 g 96.00
7.7. MetaDi Supreme Diamond Paste, polycrystalline Synthetic Diamond, polycrystalline, high diamond concentration, tight distribution of diamond grain size, in plastic syringe 1 μm Diamond Paste grey, blue coded 40-6300 5 g 18.20 1 μm Diamond Paste grey, blue coded 40-6301 20 g 66.00 3 μm Diamond Paste grey, green coded 40-6302 5 g 24.60 3 μm Diamond Paste grey, green coded 40-6303 20 g 88.00 6 μm Diamond Paste grey,yellow coded 40-6304 5 g 30.00 6 μm Diamond Paste grey, yellow coded 40-6305 20 g 109.00 9 μm Diamond Paste grey, red coded 40-6306 5 g 32.80 9 μm Diamond Paste grey, red coded 40-6307 20 g 119.00 15 μm Diamond Paste grey, brown coded 40-6308 5 g 32.80 15 μm Diamond Paste grey, brown coded 40-6309 20 g 119.00
7.8. MetaDi II Diamond Paste, monocrystalline Synthetic diamond, monocrystalline, high diamond concentration, tight distribution of diamond grain size, in plastic syringe 0.25 μm Diamond Paste grey 40-6241 5 g 11.20 0.25 μm Diamond Paste grey 40-6240 20 g 43.00 1 μm Diamond Paste blue 40-6244 5 g 8.40 1 μm Diamond Paste blue 40-6243 20 g 32.40 3 μm Diamond Paste green 40-6247 5 g 14.40 3 μm Diamond Paste green 40-6246 20 g 55.00 6 μm Diamond Paste yellow 40-6250 5 g 14.40 6 μm Diamond Paste yellow 40-6249 20 g 55.00 9 μm Diamond Paste red 40-6253 5 g 19.20 9 μm Diamond Paste red 40-6252 20 g 74.00 15 μm Diamond Paste brown 40-6256 5 g 19.20 15 μm Diamond Paste brown 40-6255 20 g 74.00
MetaDi Diamond Spray For the sake of our environment, we do not offer diamond sprays. Please use our diamond suspensions. They also make a contribution to environmental protection
7.9. Polishing Extenders (lubricants for diamond) Lubricant for diamond polishing, no alcohol, environmentally safe! MetaDi Fluid Lubricant for diamond 15 50 01 1 L 8.00 MetaDi Fluid Lubricant for diamond 15 50 03 5 L 26.00
Lubricant for diamond polishing on oil-basis, water free! AutoMet Lapping Oil 60-3250-006 180 mL 12.00 AutoMet Lapping Oil 60-3250-128 3.8 L 63.00
The oil-based products are used if higher amounts of lubrication are required, particularly with very soft materials such as lead, tin etc. Beyond that they are suitable for the preparation of water-sensitive materials such as magnesium,
crystals such as NaCl or NaBr etc. Oil-based products need more care when cleaning.
GR
IND
ING
& P
OLI
SHIN
G
40
8. Final Polishing Powders and Suspensions 8.1. Aluminium Oxide Suspensions
Topol, pH neutral
Topol 1 1.0 μm 15 11 01 1000 mL 19.60 Topol 2 0.7 μm 15 11 02 1000 mL 32.40 Topol 3 0.25 μm 15 11 03 1000 mL 45.60
Topol 1 1.0 μm 15 11 01-A 20 L 291.00 Topol 2 0.7 μm 15 11 02-A 20 L 492.00
MicroPolish II deagglomerated concentrate, can be mixed with distilled water pH: neutral
MicroPolish II alpha 5.0 μm 40-6360-006 180 mL 18.60
MicroPolish II (C) alpha 1.0 μm 40-6361-006 180 mL 23.60
MicroPolish II (A) alpha 0.3 μm 40-6363-006 180 mL 23.60 MicroPolish II (A) alpha 0.3 μm 40-6363-128 3.8 L 174.00
MicroPolish II (B) gamma 0.05 μm 40-6365-006 180 mL 24.60 MicroPolish II (B) gamma 0.05 μm 40-6365-128 3.8 L 244.00
8.2. Aluminium Oxide Powders MicroPolish II (C) Alpha-alumina powder deagglomerated, can be mixed with distilled water
MicroPolish II (C) 1 μm 40-6321-008 228 g 44.00 MicroPolish II (C) 1 μm 40-6321-016 454 g 69.00 MicroPolish II (C) 1 μm 40-6321-080 2270 g 274.00
MicroPolish II (A) Alpha-alumina powder deagglomerated, can be mixed with distilled water
MicroPolish II (A) 0.3 μm 40-6323-008 228 g 44.00 MicroPolish II (A) 0.3 μm 40-6323-016 454 g 69.00 MicroPolish II (A) 0.3 μm 40-6323-080 2270 g 274.00
MicroPolish II (B) Gamma-alumina powder deagglomerated, can be mixed with distilled water
MicroPolish II (B) 0.05 μm 40-6325-008 228 g 50.00 MicroPolish II (B) 0.05 μm 40-6325-016 454 g 74.00 MicroPolish II (B) 0.05 μm 40-6325-080 2270 g 328.00
8.3. Aluminium Oxide Final Polishing Suspensions MasterPrep finely dispersed, non-agglomerated particles (0.05 micron) of uniform size, pH: neutral
MasterPrep 0.05 μm 40-6377-032 950 mL 50.00 MasterPrep 0.05 μm 40-6377-064 1.9 L 94.00
Application: soft materials like aluminium or copper, ferrous and steels, non-ferrous metals
8.4. Colloidal Silica Suspension MasterMet SiO2-Final polishing suspension; pH : 9.5
MasterMet 0.06 μm 40-6370-006 180 mL 25.00 MasterMet 0.06 μm 40-6370-064 1.9 L 68.00
Application: non-ferrous materials and hard materials like ceramics or glass
MasterMet 2 SiO2-Final polishing suspension; pH : 9.5; non crystallizing!
MasterMet 2 0.02 μm 40-6380-006 180 mL 27.00 MasterMet 2 0.02 μm 40-6380-064 1.9 L 74.00
Application: soft non-ferrous like copper or aluminium, ceramics (Alumina, Zirconia etc.) optical fibres (glass and plastic)
Final SiO2-Final polishing suspension; pH : 9.0; non crystallizing!
Final (SILCO) 0.1 μm 15 15 01 1 L 16.80 Final (SILCO) 0.1 μm 15 15 05 5 L 66.00 Final (SILCO) 0.1 μm 15 15 10 10 L 115.00
Application: non-ferrous materials, and hard materials like ceramics or glass
The suspensions Final, MasterMet, MasterMet 2 and MasterPrep can be mixed with etchants for better polishing results!
41
8.5. Mixed Oxides Polishing Suspensions MasterPolish Alumina+SiO2-mixed oxides suspension, pH 9.0
MasterPolish 0.05 μm 40-6375-032 950 mL 80.00
Application: ferrous materials, ceramics, composites
MasterPolish2 SiO2+iron oxide-mixed oxides suspension
MasterPolish 2 0.06 μm 40-6376-032 950 mL 51.00
Application: ceramics, glass, sapphire, silicon nitride, metal/ceramic-composites
8.6. Other Polishing Materials MiroMet Cerium Oxide (CeO)-suspension
MiroMet 1 μm 40-6355-006 180 mL 41.60
Application: glass and very soft materials with very low melting point, synthetic materials, universal polishing compound for glass
MetPolish Chromium Oxide (Cr2O3)-suspension
MetPolish Nr. 1 1 μm 40-6481-006 180 mL 25.60 MetPolish Nr. 2 0.5 μm 40-6482-006 180 mL 25.60
Application carbon steel, stainless steel for spectrographic samples when Alumina cannot be used
MagoMet Magnesium Oxide (MgO)-powder
MagoMet 1 μm 40-6440-016 454 g 27.00
Application: aluminium, magnesium and their alloys
The Mechanical Preparation (continued)
Oxide Polishing material
Alumina suspension: MasterPrep and MicroPolish The importance of alumina slurries as the sole polishing medium has declined over the past years due to the availability of economical diamond products and the better results they achieve. Also, because semi or fully automatic preparation equipment is more commonplace, there is a need for continual dosing. Alumina suspensions are suitable after diamond grinding or as final polish (0.05μm). An alternative to pre-dispersed alumina suspension is MicroPolish alumina powder. The powder is mixed with distilled water to obtain the required suspension. All alumina products are equally suitable for the polishing process of metals, composite materials, minerals and ceramic materials. Deagglomerated Alumina: MicroPolish II During the production process, alumina develops agglomerated particles. In the ideal case, these agglomerates are broken during polishing into single crystals. This does not always happen during processing of soft materials such as copper, aluminium or lead, because of the low pressure used during the preparation. As a result unwanted scratches often appear on the surface. With the deagglomerated alumina products, only single crystals are available and they exhibit excellent cutting characteristics. With MicroPolish II products, high surface flatness can be reached in shorter time.
Final polishing suspensions: Final, MasterMet and MasterMet 2 These are final polishing products made of colloidal silica where high surface flatness can be obtained with metals, solder, composites coating layers. Particularly with tough or soft materials, the deformation layers are removed by the special action of these alkaline suspensions. The suspensions are used after diamond or alumina steps. These suspensions can also be used in combination with suitable etching agent for the chemical-mechanical polishing of difficult samples e.g. titanium. MasterPolish and MasterPolish 2 MasterPolish suspensions are mixed oxide products for fine grinding and final polishing of ceramic materials, semiconductors, hard metals and composite materials with non-metallic components. The polishing effect takes place via a chemo-mechanical action, i.e. the polishing agent reacts on one hand with the surface of the sample and causes chemical erosion, on the other hand the oxide particles create mechanical erosion. The results are unusually high removal rates and a highly-polished, scratch and relief-free sample surface. MasterPolish is usually used undiluted and is particularly effective when using polishing cloths without nap such as TexMet cloths. For the final polish, it can be used with our regular oxide polish cloths.
GR
IND
ING
& P
OLI
SHIN
G
42
Polishing Cloths
Buehler offers a wide range of cloths and pads for the polishing process. Premium performance cloths for all materials applications. Select from quality cloths engineered for high removal rates, long life and superior surface finishes. Economical solutions to virtually any specimen preparation task.
TexMet P Harder, perforated version of the TexMet non-woven pads; recommended for hard, brittle or ceramic materials during intermediate steps or for fine grinding process Diamond 45 μm to3 μm
TexMet 1500 Hard and durable TexMet non-woven pad, used when cloth life is desired Ceramics and hard ferrous materials Prepolishing with Diamond 15 μm to 3 μm
TexMet 2500 Medium hard TexMet non-woven pad Ferrous and non-ferrous metals, ceramics, electronic packages, PWB's, thermal spray coatings, cast iron, cermets, minerals, composites, plastics Pre- and final polishing with Diamond 15 μm to 3 μm
UltraPad Hard, woven cloth, no nap with high material removal Ferrous materials and thermal spray coatings fine grinding and prepolishing with Diamond 45 μm to 3 μm
VerduTex Medium hard woven silkcloth Steel, composite,polymers, aluminium General use for pre- and endpolishing Used to maximize flatness and retain phases while providing an excellent surface finish Diamond 9 μm to 1 μm Durable cloth with high lifetime
TriDent Medium hard, woven synthetic, no nap Ferrous and non-ferrous metals, microelectronics, coatings Used to maximize flatness and retain phases while providing an excellent surface finish Diamond 9 μm to 1 μm
VelTex Soft, dense short napped synthetic cloth Soft ferrous and non-ferrous materials Soft final polishing cloth used to maximize flatness and surface finish Diamond 9 μm to1 μm
MicroFloc Medium hard, napped rayon cloth Steel and non-ferrous materials General use for pre- and end-polishing Diamond 6 μm to 1 μm Good results with samples that are not embedded Robust and durable quality
PoliCloth Medium hard, woven wool cloth Cast iron (retaining graphite), copper and aluminium alloys, coal, soft materials General use Diamond 6 μm to 1 μm
G-Cloth Soft synthetic velvet with low nap All technical alloys and material, soft to medium hard Final polishing cloth, Diamond 3 μm to 0.25 μm and oxide polishing
MicroCloth Synthetic cloth, medium nap All technical alloys and material, soft to medium hard General use, final polishing cloth Diamond 3 μm to 0.25 μm and oxide polishing
MasterTex Soft synthetic velvet with low nap All technical alloys and material, soft to medium hard Final polishing cloth Diamond 3 μm to 0.25 μm and oxide polishing
ChemoMet Porous, soft synthetic pad, micro-nap Titanium, stainless steels, lead/tin solders, electronic packages, soft non-ferrous metals, plastics General use pad that prevents smearing during chemo-mechanical polishing
WhiteFelt Soft and durable matted wool cloth Ferrous and non-ferrous metals General use for intermediate to fine steps Oxide polishing
43
9. Polishing Cloths 9.1. Polishing Cloths Ø 200 mm (8") Ø 200 mm (8") self-adhesive backed UltraPad Hard woven napless cloth, high removal rate 40-7118 10 68.00 TexMet P Hard non-woven fibre resin, perforated 40-7638 5 74.00 TexMet 1500 Hard non-woven fibre resin 40-8618 10 46.40 TexMet 2500 Medium hard non-woven fibre resin 40-8668 10 46.40
UltraPol Hard, fine-weave silk 40-7448 10 53.00 VerduTex Medium hard to soft synthetic silk, very robust 40-8018 10 57.00 TriDent Medium hard to soft synthetic silk 40-7518 10 59.00 Nylon Medium hard woven nylon 40-7068 10 65.00
MicroFloc Medium hard, flocked rayon 40-8318 10 56.00 VelTex Soft, short-napped velvet 40-8218 10 76.00 PoliCloth Medium hard, woven wool with barrier 40-8418 10 58.00 G-Cloth Final polishing, oxide, fine fibre synthetic 16 20 58 5 26.60 MicroCloth Final polishing, soft, versatile, medium-napped synthetic 40-7218 10 46.00 MasterTex Final polishing, soft, short-napped synthetic velvet 40-7738 10 46.00 ChemoMet Final polishing, porous, chemical-resistant synthetic pad 40-7918 10 68.00
WhiteFelt Alumina-polishing, soft, durable wool-felt 16 20 02 5 27.00
9.2. Polishing Cloths Ø 250 mm (10") Ø 250 mm (10") self-adhesive backed
UltraPad Hard woven napless cloth, high removal rate 40-7120 10 97.00 TexMet P Hard non-woven fibre resin, perforated 40-7640 5 98.00 TexMet 1500 Hard non-woven fibre resin 40-8620 10 70.00 TexMet 2500 Medium hard non-woven fibre resin 40-8670 10 70.00
UltraPol Hard, fine-weave silk 40-7450 10 69.00 VerduTex Medium hard to soft synthetic silk, very robust 40-8020 10 87.00 TriDent Medium hard to soft synthetic silk 40-7520 10 91.00 Nylon Medium hard woven nylon cloth 40-7070 10 76.00
MicroFloc Medium hard, flocked rayon 40-8320 10 81.00 VelTex Soft, short-napped velvet 40-8220 10 107.00 PoliCloth Medium hard, woven wool with barrier 40-8420 10 84.00 G-Cloth Final polishing, oxide, fine fibre synthetic 16 25 58 5 34.00 MicroCloth Final polishing, soft, versatile, medium-napped synthetic 40-7220 10 63.00 MasterTex Final polishing, soft, short-napped synthetic velvet 40-7740 10 58.00 ChemoMet Final polishing, porous, chemical-resistant synthetic pad 40-7920 10 112.00
WhiteFelt Alumina-polishing, soft, durable wool-felt 16 25 02 5 34.00
9.3. Polishing Cloths Ø 300 mm (12") Ø 300 mm (12") self-adhesive backed
UltraPad Hard woven napless cloth, high removal rate 40-7122 10 117.00 TexMet P Hard non-woven fibre resin, perforated 40-76 42 5 123.00 TexMet 1500 Hard non-woven fibre resin 40-8622 10 91.00 TexMet 2500 Medium hard non-woven fibre resin 40-8672 10 91.00
UltraPol Hard, fine-weave silk cloth 40-7452 10 81.00 VerduTex Medium hard to soft synthetic silk, very robust 40-8022 10 118.00 TriDent Medium hard to soft synthetic silk 40-7522 10 94.00 Nylon Medium hard woven nylon 40-7072 10 100.00
MicroFloc Medium hard, flocked rayon 40-8322 10 111.00 VelTex Soft, short-napped velvet 40-8222 10 123.00 PoliCloth Medium hard, woven wool with barrier 40-8422 10 110.00 G-Cloth Final polishing, oxide, fine fibre synthetic 16 30 58 5 44.40 MicroCloth Final polishing, soft, versatile, medium-napped synthetic 40-7222 10 72.00 MasterTex Final polishing, soft, short-napped synthetic velvet 40-7742 10 71.00 ChemoMet Final polishing, porous, chemical-resistant synthetic pad 40-7922 10 164.00
WhiteFelt Alumina-polishing, soft, durable wool-felt 16 30 02 5 51.00
GR
IND
ING
& P
OLI
SHIN
G
44
9.4. Polishing Cloths Ø 350 mm (14") Ø 350 mm (14") self-adhesive backed UltraPad Hard woven napless cloth, high removal rate 40-7124 10 140.00 TexMet P Hard non-woven fibre resin, perforated 40-7643 5 164.00 TexMet 1500 Hard non-woven fibre resin 40-8624 10 149.00 TexMet 2500 Medium hard non-woven fibre resin 40-8674 10 149.00
UltraPol Hard, fine-weave silk 40-7454 10 99.00 VerduTex Medium hard to soft synthetic silk cloth, very robust 40-8024 10 185.00 TriDent Medium hard to soft synthetic silk 40-7524 10 105.00 Nylon Medium hard woven nylon 40-7074 10 113.00
MicroFloc Medium hard, flocked rayon 40-8324 10 145.00 VelTex Soft, short-napped velvet 40-8224 10 148.00 PoliCloth Medium hard, woven wool with barrier 40-8424 10 156.00 G-Cloth Final polishing, oxide, fine fibre synthetic 16 35 58 5 59.00 MicroCloth Final polishing, soft, versatile, medium-napped synthetic cloth 40-7224 10 80.00 ChemoMet Final polishing, porous, chemical-resistant synthetic pad 40-7924 10 208.00
WhiteFelt Alumina-polishing, soft, durable wool-felt 16 35 02 5 68.00
10. Consumables for MiniMet
10.1. CarbiMet Silicon Carbide-Paper for MiniMet
Ø 73 mm high quality CarbiMet, self-adhesive backed
120 (P120) Silicon Carbide 116 μm 30-5170-120-100 100 26.00 180 (P180) Silicon Carbide 78 μm 30-5170-180-100 100 24.40 240 (P280) Silicon Carbide 52 μm 30-5170-240-100 100 24.40 320 (P400) Silicon Carbide 35 μm 30-5170-320-100 100 24.40 400 (P800) Silicon Carbide 22 μm 30-5170-400-100 100 24.40 600 (P1200) Silicon Carbide 15 μm 30-5170-600-100 100 24.40 800 (P1500) Silicon Carbide 12 μm 30-5170-800-100 100 32.60 1200 (P2500) Silicon Carbide 6.5 μm 30-5170-012-100 100 32.60 MiniMet-Set 30-5178-180 50 23.80 Content: 10 abrasive papers with grit sizes 180, 240, 320, 400, 600
10.2. UltraPrep Grinding Discs for MiniMet Ø 73 mm Diamond Disc, self-adhesive backed
125 μm Diamond Disc metal bonded 69-1599 1 36.00 70 μm Diamond Disc metal bonded 69-1571 1 28.00 45 μm Diamond Disc metal bonded 69-1545 1 20.60 15 μm Diamond Disc metal bonded 69-1515 1 20.60 9 μm Diamond Disc metal bonded 69-1509 1 20.60 6 μm Diamond Disc metal bonded 69-1506 1 22.60
10.3. Polishing Cloths for MiniMet Ø 73 mm for MiniMet
UltraPlan Stainless steel woven mesh 69-1525 10 20.60 UltraPad Hard woven napless cloth 40-7112 20 27.60 TexMet 1500 Hard non-woven fibre resin cloth 40-8602 20 52.00 TexMet 2500 Medium hard non-woven fibre resin 40-8652 20 52.00 TriDent Medium hard to soft synthetic silk cloth 40-7502 20 30.00 Nylon Medium hard woven nylon cloth 40-7052 20 33.60 MicroCloth Oxide polishing, soft, versatile, medium-napped synthetic cloth 40-7212 20 32.60 MasterTex Final polishing, soft, short-napped synthetic velvet-cloth 40-7702 20 33.60 ChemoMet I Final polishing, synthetic, chemically resistant 40-7902 20 60.00
10.4. Diamond Grinding Discs for MiniMet for TEM-Insert MiniMet, self-adhesive backed
45 μm metal bonded Ø 54 mm (21/8") 69-1593 1 138.00 30 μm metal bonded Ø 54 mm (21/8") 69-1592 1 138.00 15 μm metal bonded Ø 54 mm (21/8") 69-1591 1 138.00 6 μm metal bonded Ø 54 mm (21/8") 69-1594 1 138.00
45
11. Consumables for Field Metallography 11. 1. Abrasive papers for Electer, PortaPol and other For rubber disc holder, velcro-mounting Ø 30 mm, alumina P60 30 mm 12 03 51 100 23.20 P120 30 mm 12 03 54 100 23.20 P180 30 mm 12 03 56 100 23.20 P240 30 mm 12 03 58 100 23.20
For rubber disc holder, Ø 32 mm, alumina, self-adhesive backed
320 32 mm M305150320 500 67.00 400 32 mm M305150400 500 67.00 600 32 mm M305150600 500 67.00 800 32 mm M305150800 500 67.00
11.2. Grinding and Polishing Brushes for Electer, PortaPol and other Spanner for straight handle, arbor-Ø 6 mm, to be used with grinding brushes Spanner for straight handle 13 10 05 1 6.80
Grinding brushes for straight handles to be used with spanner 13 10 05, quick lock Grit 80 Ø 63x32 mm 13 10 02 1 17.20 Grit 120 Ø 63x32 mm 13 10 04 1 17.20 Grit 180 Ø 63x32 mm 13 10 06 1 17.20
Fine Ø 63x32 mm 13 10 08 1 15.80 Extra fine Ø 63x32 mm 13 10 10 1 15.80
Felt polishing head, arbor-Ø 6 mm, for straight handle Felt head cone 25x30 mm 13 10 11 1 10.80
11.3. Polishing Cloths for Electer, PortaPol and other Polishing cloths for rubber disc holder Ø 30 mm, self-adhesive backed
WhiteFelt general application 16 03 00 20 17.60 VelTex napped cloth 16 03 61 20 25.60
11.4. Replicating Material RepliMet is a premium quality replicating media for exact surface replicas with < 1 μm resolution in surface detail. It is simple to use, fast setting and simple to remove. Cover the complete area of interest with a small amount of the Replication Media and allow to cure. After curing, the media can simply be peeled off.
Replicating Media for field metallography
Manual Applicator 57-6000 1 45.20 Static Mixers 57-6001 10 10.00
Replication Media 1/7 1min working / 7 min curing time 57-6002 50mL 35.00 Replication Media 7/30T thixotropic, 7min working / 30 min curing time 57-6003 50mL 35.00
Acetate-replicating sheets for field metallography
Replica sheet 10x12 cm, 35 μm thick 70-986E 20 sheet 68.00 Replica sheet 10x12 cm, 125 μm thick 70-987E 20 sheet 75.00
Replica tape roll 25.4 x 7600 mm, 130 μm thick 57-5000 1 Roll 26.60
Application note: Soak the Replica sheet in acetone. Wet the polished and etched surface with a few drops of acetone and cover it with the replica sheet. After drying, the sheet can be peeled off and attached to a slide for microscopic examination.
GR
IND
ING
& P
OLI
SHIN
G
46
12. Fibre optics and Microelectronics 12.1. FibrMet Abrasive Discs FibrMet Abrasive Discs are PSA (polyester backed) films, approx. 0.1 mm thick, coated with either an aluminium oxide or silicon carbide abrasive. These discs and sheets can be used wet or dry and are most suitable for fine grinding and polishing application, such as optical fibre and microelectronics where resultant surface flatness is essential.
for FibrMet-Platen with Ø 102 mm (4")
12 μm yellow aluminium oxide, PSA 69-3100-050 50 32.00 9 μm blue aluminium oxide, PSA 69-3101-050 50 32.00 3 μm Pink aluminium oxide, PSA 69-3102-050 50 32.00 1 μm green aluminium oxide, PSA 69-3103-050 50 32.00 0.3 μm grey aluminium oxide, PSA 69-3104-050 50 32.00
for Platen with Ø 203 mm (8")
12 μm yellow aluminium oxide, PSA 69-3170 50 64.00 9 μm blue aluminium oxide, PSA 69-3171 50 64.00 3 μm Pink aluminium oxide, PSA 69-3172 50 64.00 1 μm green aluminium oxide, PSA 69-3173 50 64.00 0.3 μm grey aluminium oxide, PSA 69-3174 50 64.00
for Platen with Ø 305 mm (12")
12 μm yellow aluminium oxide, PSA 69-3120 50 171.00 9 μm blue aluminium oxide, PSA 69-3121 50 171.00 3 μm Pink aluminium oxide, PSA 69-3122 50 171.00 1 μm green aluminium oxide, PSA 69-3123 50 171.00 0.3 μm grey aluminium oxide, PSA 69-3124 50 171.00
Extender for FibrMet-films
FibrMet Polishing Extender 69-3080-008 8 oz 17.20 FibrMet Polishing Extender 69-3080-032 32 oz 56.00
47
12.2. UltraPrep Diamond Grinding Film Type A UltraPrep Diamond Film Products are designed for various material applications including microelectronic devices, wafers, ceramics, optical fibres, petrographic, and other metallographic materials. The Type A film is ideal for preparation applications where surface flatness and minimal deformation are critical.
for FibrMet-Platen with Ø 102 mm (4")
30 μm green self adhesive, diamond 69-3111 5 64.00 15 μm dark brown self adhesive, diamond 69-3112 5 53.00 9 μm blue self adhesive, diamond 69-3113 5 53.00 6 μm brown self adhesive, diamond 69-3114 5 53.00 3 μm pink self adhesive, diamond 69-3115 5 53.00 1 μm purple self adhesive, diamond 69-3116 5 53.00 0.5 μm creamy white self adhesive, diamond 69-3117 5 53.00 0.1 μm grey self adhesive, diamond 69-3118 5 53.00
for Platen with Ø 203 mm (8")
30 μm green self adhesive, diamond 15-6830 5 161.00 15 μm dark brown self adhesive, diamond 15-6815 5 130.00 9 μm blue self adhesive, diamond 15-6809 5 130.00 6 μm brown self adhesive, diamond 15-6806 5 130.00 3 μm pink self adhesive, diamond 15-6803 5 130.00 1 μm purple self adhesive, diamond 15-6801 5 130.00 0.5 μm creamy white self adhesive, diamond 15-6795 5 130.00 0.1 μm grey self adhesive, diamond 15-6791 5 130.00
30 μm green plain, diamond 15-6831 5 143.00 15 μm dark brown plain, diamond 15-6816 5 116.00 9 μm blue plain, diamond 15-6810 5 116.00 6 μm brown plain, diamond 15-6807 5 116.00 3 μm pink plain, diamond 15-6804 5 116.00 1 μm purple plain, diamond 15-6802 5 116.00 0.5 μm creamy white plain, diamond 15-6796 5 116.00 0.1 μm grey plain, diamond 15-6792 5 116.00
for Platen with Ø 305 mm (12")
30 μm green self adhesive, diamond 15-6930 3 253.00 15 μm dark brown self adhesive, diamond 15-6915 3 221.00 9 μm blue self adhesive, diamond 15-6909 3 221.00 6 μm brown self adhesive, diamond 15-6906 3 221.00 3 μm pink self adhesive, diamond 15-6903 3 221.00 1 μm purple self adhesive, diamond 15-6901 3 221.00 0.5 μm creamy white self adhesive, diamond 15-6895 3 221.00 0.1 μm grey self adhesive, diamond 15-6891 3 221.00
30 μm green plain, diamond 15-6931 3 230.00 15 μm dark brown plain, diamond 15-6916 3 203.00 9 μm blue plain, diamond 15-6910 3 203.00 6 μm brown plain, diamond 15-6907 3 203.00 3 μm pink plain, diamond 15-6904 3 203.00 1 μm purple plain, diamond 15-6902 3 203.00 0.5 μm creamy white plain, diamond 15-6896 3 203.00 0.1 μm grey plain, diamond 15-6892 3 203.00
Plain UltraPrep grinding films normally are fixed via adhesion with some drops of water on a plain glass platen.
The glass is supported by a standard platen for use with all grinder polishers from Buehler.
GR
IND
ING
& P
OLI
SHIN
G
48
13. Various Aids and Laboratory Accessories 13.1. Cleaning and Etching Cleaning accessories
Plastic bottle with spray nozzle 0.5 L 15 51 01 1 5.40 Plastic bottle with spray tube 0.5 L 15 20 01 1 3.20 Plastic bottle with spray tube 1.0 L 15 20 02 1 3.80
PlasticBox for Cotton Wool,to be wall-mounted, supplied with cotton wool 17 20 14 1 26.00 Pure Cotton Wool 200 g 17 20 05 200g 2.20
Gloves (disposable), small (Gr. 6-7) 11 30 35 100 10.80 Gloves (disposable), medium (Gr. 7-8) 11 30 36 100 10.80 Gloves (disposable), large (Gr. 8-9) 11 30 37 100 10.80
Industrial cleaner for removing remaining adhesive from work discs
Cleaner Spray, lemon-base 19 99 95 500 mL 25.60
Etching beakers and accessories
Polypropylene etching beaker with lid Ø 70 mm 17 20 10 1 3.80 Polypropylene etching beaker with lid Ø 120 mm 17 20 11 1 5.80
Tweezers, stainless steel, 200 mm 17 20 04 1 8.20
13.2. Ultrasonic Cleaning Solultions UltraMet 2 Sonic Cleaning Solution is an environmentally safe, degreasing agent for more difficult cleaning requirements. It is recommended for use on the BuehlerVanguard Fully Automatic Preparation System.
Ultrasonic Cleaning Solutions, mixing ratio 1:20 up to 1:6
UltraMet 2 Ultrasonic Cleaning Solution 63-6000-006 0.18 L 13.60 UltraMet 2 Ultrasonic Cleaning Solution 75-6000-032 0.95 L 19.00
At www.buehler.com you will fi nd the latest information about equipment, consumables, MSDS safety data sheets, helpful links and other interesting information.
49
13.3. Bonding Material Thermoplastic for mounting thin sections on sample holders
Lakeside Cement L 70 C 12 bars, approx. 250 g 40-8100 1 67.00 used at 120-140°C, solid after cooling, soluble in alcohol and acetone
Crystalbond Nr. 509 1 bar, approx. 100 g 40-8150 1 37.00 used at 120-130°C, solid after cooling, soluble in alcohol and acetone
Buehler Balsam neutral 40-8110-004 114 g 44.40 BuehlerBalsam neutral 40-8110-016 454 g 123.00 heat to 120°C for 10-15 min, solid after cooling, soluble in alcohol and acetone
13.4. Storing Storage cabinet for abrasive papers, polishing cloths, platen, MagnoDiscs, stackable
Storage cabinet for consumables and accessories Ø 250 mm
3 Shelves 260 x 90 x 346 mm (WxHxD) inner diameter 19 06 05 1 84.00 6 Shelves 260 x 40 x 346 mm (WxHxD) inner diameter 19 06 06 1 101.00 12 Shelves 260 x 16 x 346 mm (WxHxD) inner diameter 19 06 07 1 109.00
Storage cabinet, PVC light grey with plexiglas door, removable inserts
Storage cabinet for consumables and accessories Ø 300 mm 6 shelves, 335 x 320 x 330 mm (WxDxH), outer diameter 19 06 09 1 206.00
Additional Inserts (4 pieces) for storage cabinet19 06 09 Ideal for MagnoMet or MagnoPad-discs 19 06 10 1 58.00
Dessicator storage cabinet for prepared specimens (with silica gel drying material)
Storage cabinet with 10 drawers 400 x 420 x 500 mm (WxDxH) 22.5 kg 20-1445 1 728.00
Inserts for storage cabinet 20-1445 for 50 samples with Ø 25 mm (1") 20-1446 1 22.00 for 50 samples with Ø 32 mm (1¼") 20-1447 1 22.00 for 38 samples with Ø 40 mm (1½") 20-1448 1 22.60
Dessicator for storage of samples
Dessicator glass with lid and 3 plexiglas divisions 19 06 01 1 207.00 Lid for dessicator Ø 250 mm (spare part) 19 06 02 1 40.40 Plexiglas division for dessicator (spare part) 19 06 03 1 47.20 Silica gel for samples storing and dessicators 19 06 04 1 kg 21.20 Vacuum grease 83 43 02 1 11.80 MetCoat protection lacquer for samples, aerosol 20-8190 170 g 11.20
13.5. Accessories for Microscopy Metal Slides 75 x 25 mm 19 04 03 5 32.40 Plasticine Clay 19 04 01 1 kg 5.80 Protective Paper (Josef-Paper) to use with levelling press 19 04 02 1000 13.20
Glass Slides 28 x 48 mm 19 05 01 100 24.40 Cover Slips 20 x 20 mm 19 05 02 100 2.00 Glass Slides 46 x 27 mm L312 100 33.00 Glass Slides 76 x 26 mm L316 100 12.80 Glass Slides 76 x 51 mm L318 100 22.60
13.6. Books and Educational Material E. Weck and E. Leistner: Metallographic instructions for color etching I 20 00 05 1 30.00 Klemm color etching E. Weck and E. Leistner: Metallographic instructions for color etching II 20 00 06 1 36.00 Beraha color etchants and their different variations E. Weck and E. Leistner: Metallographic instructions for color etching III 20 00 07 1 36.00 Non ferrous materials, cemented carbides and ferrous metals, nickel- and cobalt-base alloys Sum-Met, Buehler's Guide for Materials Preparation, CD-ROM FN 01255 1 65.00 Iron-Carbon/Cementite Phase Diagram, Poster, 96x63,5 cm FN 00454 1 13.00 Table for Knoop and Vickers Hardness Numbers FN 00726 1 24.00
VA
RIO
US
AC
CES
SOR
IES
50
Index A Abrasive cut-off wheels _____ 8, 11 Abrasive papers _____________ 30 Abrasive powders ____________ 36 Accessories for cold mounting __ 23 AcuThin Blades ______________ 13 Adhesive discs double sided ____ 35 Alumina cut-off blades ______ 8, 11 Alumina polishing (cloth for) ___ 43 Alumina suspension __________ 40 AutoMet Lapping Oil __________ 39 Apex ______________________ 25 Apex DGD __________________ 26 ApexHercules H & S___________ 25
B Bakelite ____________________ 18 Buehler Balsam ______________ 49
C CarbiMet grinding papers _____ 34 CBN-blades for precision cutters _ 9 CBN-Blades for abrasive cutters _ 15 Cerium oxide suspension ______ 41 ChemoMet cloth _____________ 43 Chromium oxide suspension ___ 41 Cleaning solutions ___________ 48 Cold mounting compound _____ 19 Cool coolant ________________ 16 CoolMet 2 coolant____________ 16 Compression mounting compounds 17 Conductive Filler _____________ 23 Cotton wool ________________ 48 Crystalbond ________________ 49 Cutting materials _____________ 8 Cut-off blades ________________ 8
D Dessicator __________________ 49 Diamond grinding discs _______ 26 Diamond lubricant ___________ 39 Diamond paste ______________ 39 Diamond polishing compounds _ 37 Diamond suspension__________ 37 Diamond cut-off blades _____ 8, 15 Drying agent silica gel _________ 49
E EdgeMet Kit ________________ 23 EpoBlue ____________________ 23 EpoColor ___________________ 20 EpoHeat ___________________ 20 EpoKwick __________________ 20 EpoMet ____________________ 18 EpoMix ____________________ 20 EpoPlast ___________________ 20 EpoThin ____________________ 20 Epovit _____________________ 18 Epoxy cold mounting compounds _ 20 EpoxiCure __________________ 20 Etching beakers (polyproplyene) 48
F FibrMet abrasive discs _________46 Field metallography ___________45 Final polishing suspension ______40 Final polishing materials _______40 FlatEdgeFiller ________________23
G G-Cloth _____________________43 Glossy, clear view paste ________16 Gloves _____________________48 Grinding belts _______________35 Grinding cups ________________16 Grinding papers ______________30 Grindng powders _____________36 Grinding rolls ________________35
H Hercules fine grinding discs _____25
I IsoCut CBN-cut-off blades _______9 IsoCut coolant _______________16 IsoCut Plus coolant ___________16
J Josef-Paper __________________49
K KonductoMet I _______________18
L Laboratory accessories ________48 Lakeside Cement L70C ________49 Literature ___________________49 Lubricant ___________________39
M MagnoDisc __________________25 MagnoFix ___________________25 MagnoMet __________________25 MagnoPad __________________25 MagoMet ___________________41 MasterMet __________________40 MasterPolish ________________41 MasterPrep __________________40 MasterTex __________________43 MetaDi diamond products ______38 MetaDi Fluid _________________39 MetCoat protection lacquer ____49 MetGrip Liners, adhesive foils ___35 MetPolish chromium oxide _____41 MetSet mounting moulds ______22 MicroCloth __________________43 MicroFloc ___________________43 MicroPolish _________________40 MiniMet consumables _________44 Mineral Spirit ________________16 MiroMet cerium oxide _________41 Mixed oxides polishing compounds 41 Mounting aids _______________23 Mounting compounds _________17 Mounting moulds ____________22 MultiClamp _________________23
N Nylon cloth__________________ 43
O Oxide polishing compounds ____ 40
P PetroThin consumables _______ 16 Pigments for epoxies __________ 23 PhenoCure __________________ 18 Planar grinding papers ________ 29 PlanarMet __________________ 29 Plasticine ___________________ 49 PoliCloth ___________________ 43 Polishing cloths ______________ 42 Powder alumina _____________ 36 Powder silicon carbide _________ 36 Premolds ___________________ 18 ProbeMet ___________________ 18
R ReleaseAgent _______________ 23 Replicating Media ____________ 46 Ring forms __________________ 22
S SamplKlip __________________ 23 SamplKup __________________ 22 SamplKwick _________________ 20 Silica gel ____________________ 49 Silcon carbide papers _________ 30 Silicone spray ________________ 23 Spray bottles (plastic) _________ 48 Slides (glass) ________________ 49 Slides (metall) _______________ 49 Spray adhesive _______________ 35 Stirrers _____________________ 23 Storage cabinet ______________ 49
T Technovit __________________ 20 TexMet cloth ________________ 43 Topol ______________________ 40 TransOptic powder ___________ 18 TriDent ____________________ 43 Tweezers ___________________ 48
U UltraPad ____________________ 43 UltraPol ____________________ 43 UltraPrep ___________________ 29 Ultrasonic cleaning sloution ____ 48 UniClip _____________________ 23
V VariDur cold mounting compound_ 19 VerduTex cloth_______________ 43 VelTex cloth _________________ 43
W White Felt __________________ 43
Z Zirconia grinding papers _______ 29 ZirMet planar grinding paper ___ 29