Post on 10-Jul-2020
1 www.x-calibur.us
X-Joint Building Expansion Joint SystemsJan 2018
TheCompleteJoint SystemSolution
2 www.x-calibur.us
Contents
S e le ct io n C h art
Floor Joint Profi les
T ile s & S cre e d
Wall & Ceiling Profi les
Roof Profi les
C lip S t rip s
J o in t S e als
S t air N o sin g s
F lo o r S k irt in g
3 - 6
7 - 1 9
2 0 - 2 4
2 5 - 3 1
3 2 - 3 4
3 5
3 6 - 3 8
3 9
4 0
Page
N o t e t o A rch it e ct s an d I n t e rio r D e sig n e rsWe can supply all our profi les and insert incustom colours to match the interior design.
3 www.x-calibur.us
X-Joint Profiles Selection Chart
PageProfile Name
Floor Joint Profiles
X -J o in t F H D -S FHeavy duty joint covers for use in car parks, warehouses and ramps. Installed after completion of the final floor finish.
X -J o in t F H D 2 -S FHeavy duty expansion joint for use in car parks, warehouses and ramps. Lower profile than FHD-SF. Installed after completion of the final floor.
X -J o in t F H D -B SHigh load capacity flush fit expansion joints for use on industrial floorssubject to slow moving traffic (cars, trucks, forklifts, trolleys etc). Installed beneath the screed.
X -J o in t F M D -S F Medium duty joint covers for use in areas subject to heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.
X -J o in t F M D 2 -S F Medium duty expansion joints for use in areas subject to heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.
X -J o in t F M D -B S Medium load capacity flush fit expansion joint for floors in areas subject heavy pedestrian and slow moving cars. Installed beneath the screed.
X -J o in t F R A -B S Water resistant expansion joints for heavy pedestrian and slow moving vehicular traffic. Installed beneath the screed.
X -J o in t F R A -S F Water resistant expansion joints for heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.
X -J o in t F L P -2 B S Stainless steel finish expansion joints for use with high end floor finishes. Installed beneath screed.
X -J o in t C P S -F High movement (seismic) expansion joint covers for use in car parks and areas subject to vehicular traffic. Installed after completion of the final floor finish.
X -J o in t C P S -R High movement (seismic) expansion joint covers for use in car parks and areas subject to vehicular traffic. Installed beneath the screed.
X -J o in t F S J -B S Large movement seismic expansion joints for use in high end floor finishes with minimum effect of the appearance of the floor. Installed beneath the floor screed.
X -J o in t F F J -B S Large movement seismic expansion joints for use with thin floor finishes, such as tile, vinyl or carpet, with minimum effect of the appearance of the floor. Installed beneath the floor screed.
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
4 www.x-calibur.us
X -J o in t C J 1Anodized aluminum neoprene construction joint for use with tiles and stone. Installed when floor finish is being laid.
X -J o in t C J 2 Anodized aluminum neoprene construction joint for use with tiles and stone. Installed beneath the screed.
X -J o in t C J 3 Stainless steel neoprene construction joint for use with tiles and stone. Installed when floor finish is being laid.
X -J o in t C J 4 Anodized aluminum polyurethane/polyethylene construction joint for use with tiles and stone. Accepts higher movement than neoprene. Installed when floor finish is being laid.
X -J o in t A J S Extruded anodized aluminium joint separators for screed and floor finishes.
Tile & Screed
Wall & Ceiling Profiles
and interior joints on �
joints on � �xings.
X -J o in t C W J 3
to provide a ush �nish with no visible �xings.
nished wall
X -J o in t S W J I Extruded anodized joint covers used to cover exterior
nished walls and ceilings.
X -J o in t C W J I Extruded anodized joint covers used to cover exterior and interior
nished walls and ceilings, with no visible
X -J o in t S W J 2 High movement capacity anodized aluminum/PVC weather seal expansion joint for use in walls and ceilings in internal and external applications.
X -J o in t C W J 2 Anodised aluminum expansion joint with integrated weather seal for use in wall and ceilings. Installed beneath the plaster or wall board
�
X -J o in t S W J 3 Anodised aluminum expansion joint with integrated weather sealfor use in wall and ceilings. Fixed directly on to the �surface.
Anodised aluminum/PVC �oor expansion joint with visble weatherseal for interior joints on walls and ceilings.Installed beneath the plaster or wall board to provide a �ush �nish with no visible �xings.
X -J o in t S W J 4 Anodised aluminum/PVC �oor expansion joint with visible weatherseal for interior joints on walls and ceilings.Fixed directly on to the �nishedwall surface.
X-Joint Profiles Selection Chart
PageProfile Name
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
3 0
3 1
5 www.x-calibur.us
X-Joint Profiles Selection Chart
PageProfile Name
5
X-Joint Profiles
Page
X -J o in t R J 1 Anodized aluminium fully waterproof joint system that is used on roofs that will be subject to pedestrian traf�c. It is used in joints widths of 1 5 mm to 1 0 0 mm.
X -J o in t R J 2 High movement ( seismic) anodised aluminium/PVC wall joint for use with a wall �nish up to 1 6 mm thick . J oint must be �xed on to a concrete or masonary substrate. X -J o in t R J 3 High movement ( seismic) anodised aluminium/PVC wall joint for use with a wall �nish up to 1 6 mm thick . J oint must be �xed on to a concrete or masonary substrate.
Selection Chart
Pro�le Name
Roof Profiles
ClipStrips
X -J o in t C lip S t rip F 4 5 C & F 5 5 C
X -J o in t C lip S t rip F 5 5 F , F 7 0 F & F 1 0 0 F
X -J o in t C lip S t rip W 7 0 C & W 1 0 0 C
X -J o in t C lip S t rip W 5 5 G
X -J o in t C lip S t rip C 5 0 & C 1 0 0
S p rin g C lip s S S 4 0 & S S 6 0
Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.
Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.
Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.
Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.
Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.
For fixing X - J oint Clip Strip series
www.co rk j o in t .co m
3 2
3 3
3 4
3 5
6 www.x-calibur.us
X-Joint Profiles Selection Chart
6
X -J o in t E P S H D
www.co rk j o in t .co m
PageProfile Name
3 6
3 7
3 8
3 9
4 0
7
X-Joint
www.x-calibur.us
Floor Joint Profiles
Heavy Duty • Surface FixFHD-SF
7
CBAepyT
F lat P ro file
601104 ot 504/011 FS-DHF
855156 ot 1407/551 FS-DHF
9581001 ot 66001/581 FS-DHF
9 .5062051 ot 101051/062 FS-DHF
21523002 ot 151002/523 FS-DHF
X-Joint Floor Joint Profiles
FHD-SF
C o rn e r P ro file
FHD - SF/C 1 1 0 /4 0
9
9
6
1 2 2
1 2 26 4
7 1 to 1 0 0
5 to 4 0
4 1 to 7 0FHD - SF/C 1 5 5 /7 0
FHD - SF/C 1 8 5 /1 0 0
D imensions in mm
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill fi nish aluminium.S up p ly L e n g t h s
4 m, custom lengths can be producedin order to minimize wastage.EPS J oint Seal: 2 0 m rollSupplied with stainless steel anchors and screws.
F H D -S F F H D -S F / C
D e scrip t io nHeavy duty joint covers for use in car park s, warehouses and ramps.
Installed after completion of the final floor finish. EPS System is optional.
SS Counter SunkAnchors & Screw
SS Counter SunkAnchors & Screws
X - T ite StrongSeal X - T ite StrongSealEPS
J oint Seal
EPS J oint Seal
www.co rk j o in t .co m
Heavy Duty Screed Fix
8
X-Joint
www.x-calibur.us
Floor Joint Profiles
Heavy Duty • Surface FixFHD2-SF
8
X-Joint Floor Joint Profiles
FHD2-SF Heavy Duty Surface Fix
D e scrip t io nHeavy duty expansion joint for use in car park s, warehouses and ramps.
Installed after completion of the final floor � nish.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .
S up p ly L e n g t h s4 m, custom lengths can be produced against minimum order.
T y p e A B C D T o t al M o v e m e n t
F lat P ro file
FHD 2 - SF 5 0 5 0 2 0 0 7 5 2 1 3 2
FHD 2 - SF 1 0 0 1 0 0 2 5 0 7 5 2 1 5 5
FHD 2 - SF 1 2 5 1 2 5 2 6 8 7 2 2 3 5 5
FHD 2 - SF 1 5 0 1 5 0 3 0 8 7 9 2 7 7 2D imensions in mm
FHD 2 - SF
F H D 2 -S F
pro� les have the same load capacity as FHD - B S series provided that, they are installed as shown in the drawing below.
F H D 2 -S F
X - T ite StrongB ond
SS Counter SunkAnchor & Screws
SS Counter SunkAnchor & Screws
www.co rk j o in t .co m
9
X-Joint
www.x-calibur.us
Floor Joint Profiles
Heavy Duty • Screed FixFHD-BS
9
X-Joint Floor Joint Profiles
FHD-BS Heavy Duty Screed Fix
D e scrip t io nHigh load capacity � ush � t expansion joint for use on industrial � oors subject to slow moving traf� c ( cars, truck s, fork lifts, trolleys etc) . Installed beneath the screed.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .
S up p ly L e n g t h s4 m, custom lengths can be produced against minimum order.
L o ad C ap acit yM axim um A xle L o ad :FHD - B S 5 0 : 6 tonsFHD - B S 7 5 : 5 tonsFHD - B S 1 0 0 : 4 tons
T y p e A B C D * T o t al M o v e m e n t
F lat P ro file
FHD - B S 5 0 5 0 8 4 1 5 8 2 8 3 0
FHD - B S 7 5 7 5 1 1 9 1 9 5 3 0 4 0
FHD - B S 1 0 0 1 0 0 1 4 4 2 3 2 3 0 5 0D imensions in mm * Pro� le height “ D ” can be increased using X - R oc R esiCrete S or X - T ite Strong B ond.
F H D -B S
M 1 0 Anchor in X - T ite R esiL oc E
X - T ite StrongB ondor X - R oc R esiCrete S
www.co rk j o in t .co m
1 0
X-Joint
www.x-calibur.us
Floor Joint Profiles
Medium Duty • Surface FixFMD-SF
1 0
Medium Duty • Surface Fix
C o rn e r P ro file
FM D - SF/C 5 0 5 0 6 4 5 0 4 6 7
FM D - SF/C 7 5 7 5 1 2 0 5 0 4 1 2 0
FM D - SF/C 1 0 0 1 0 0 1 2 0 5 0 4 1 2 0
FM D - SF/C 1 0 0 1 0 0 1 7 0 5 0 4 1 7 0
FM D - SF/C 1 2 5 1 2 5 1 7 0 5 0 4 1 7 0
FM D - SF/C 1 5 0 1 5 0 2 0 5 5 0 6 1 7 0D imensions in mm
X-Joint Floor Joint Profiles
FMD-SF
D e scrip t io nExtruded aluminum joint covers for Fl oors in areas with heavy pedestrian traffi c.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill finish aluminium.J oint Seals: PVC
S up p ly L e n g t h sProfile: 4 mJ oint Seals: 2 0 m rollCustom lengths can be produced against minimum order.
T y p e A B C D T o t al M o v e m e n t *
F lat P ro file
FM D - SF 5 0 5 0 1 1 7 - 5 6 7
FM D - SF 7 5 7 5 1 7 0 - 5 1 2 0
FM D - SF 1 0 0 1 0 0 1 7 0 - 5 1 2 0
FM D - SF 1 2 5 1 2 5 2 6 0 - 6 1 7 0
FM D - SF 1 5 0 1 5 0 2 6 0 - 6 1 7 0
* M ovements depend on the cover plate width
F M D -S FF M D -S F / C
X - T ite StrongSealX - T ite
StrongSeal
EPS J oint Seal
CSK Headed Screws/Fischer Plugs
EPS J oint Seal
CSK Headed Screws/Fischer Plugs
www.co rk j o in t .co m
1 1
X-Joint
www.x-calibur.us
Floor Joint Profiles
Medium Duty • Surface FixFMD2-SF
1 1
X-Joint Floor Joint Profiles
FMD2-SF
C o rn e r P ro file
FM D 2 - SF/C 4 5 4 5 4 3 4 5 8 8 1 4 4 7 1 3
FM D 2 - SF/C 6 0 6 0 5 8 4 5 1 0 3 1 4 4 7 1 6
FM D 2 - SF/C 1 0 0 1 0 0 9 7 5 6 1 5 3 1 6 4 4 4 0
FM D 2 - SF/C 1 5 0 1 5 0 1 4 7 5 6 2 0 3 1 6 4 4 8 0D imensions in mm
T y p e A B C D E F T o t al M o v e m e n t
F lat P ro file
FM D 2 - SF 4 5 4 5 4 5 4 5 1 3 5 1 4 - 1 3
FM D 2 - SF 6 0 6 0 6 0 4 5 1 5 0 1 4 - 1 6
FM D 2 - SF 1 0 0 1 0 0 1 0 0 5 6 2 1 2 1 6 - 4 0
FM D 2 - SF 1 5 0 1 5 0 1 5 0 5 6 2 6 2 1 6 - 8 0
D e scrip t io nM edium duty expansion joint for use in areas subject to heavy pedestrian and slow moving vehicular traf� c.
Installed after completion of the � nal � oor � nish.
M at e rialsAnodized aluminium 6 0 6 3 /T 6Can also be supplied in mill � nish aluminium.
S up p ly L e n g t h s4 m, custom lengths can be produced against minimum order.
F M D 2 -S F F M D 2 -S F / C
Medium Duty • Surface Fix
CSK Headed Screws/Fischer Plugs
CSK Headed Screws/Fischer Plugs
www.co rk j o in t .co m1 0
Medium Duty • Surface Fix
C o rn e r P ro file
FM D - SF/C 5 0 5 0 6 4 5 0 4 6 7
FM D - SF/C 7 5 7 5 1 2 0 5 0 4 1 2 0
FM D - SF/C 1 0 0 1 0 0 1 2 0 5 0 4 1 2 0
FM D - SF/C 1 0 0 1 0 0 1 7 0 5 0 4 1 7 0
FM D - SF/C 1 2 5 1 2 5 1 7 0 5 0 4 1 7 0
FM D - SF/C 1 5 0 1 5 0 2 0 5 5 0 6 1 7 0D imensions in mm
X-Joint Floor Joint Profiles
FMD-SF
D e scrip t io nExtruded aluminum joint covers for Fl oors in areas with heavy pedestrian traffi c.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill finish aluminium.J oint Seals: PVC
S up p ly L e n g t h sProfile: 4 mJ oint Seals: 2 0 m rollCustom lengths can be produced against minimum order.
T y p e A B C D T o t al M o v e m e n t *
F lat P ro file
FM D - SF 5 0 5 0 1 1 7 - 5 6 7
FM D - SF 7 5 7 5 1 7 0 - 5 1 2 0
FM D - SF 1 0 0 1 0 0 1 7 0 - 5 1 2 0
FM D - SF 1 2 5 1 2 5 2 6 0 - 6 1 7 0
FM D - SF 1 5 0 1 5 0 2 6 0 - 6 1 7 0
* M ovements depend on the cover plate width
F M D -S FF M D -S F / C
X - T ite StrongSealX - T ite
StrongSeal
EPS J oint Seal
CSK Headed Screws/Fischer Plugs
EPS J oint Seal
CSK Headed Screws/Fischer Plugs
www.co rk j o in t .co m
1 2
X-Joint
www.x-calibur.us
Floor Joint Profiles
Medium Duty • Screed FixFMD-BS
1 2
X-Joint Floor Joint Profiles
FMD-BS
D e scrip t io nM edium load capacity fl ush fi t expansion joint for � oors in areas subject to heavy pedestrian and slow moving cars.
Installed beneath the screed.
M at e rialsAnodized aluminium 6 0 6 3 /T 6Can also be supplied in mill fi nish aluminium.
S up p ly L e n g t h s4 m, custom lengths can be produced againtsminimum order.
T y p e A B C D E F T o t al M o v e m e n t
F lat P ro file
FM D - B S 3 5 3 5 4 5 3 5 1 1 5 1 6 /3 0 - 1 3
FM D - B S 5 0 5 0 6 0 3 5 1 3 0 1 6 /3 0 - 1 6
FM D - B S 1 0 0 1 0 0 1 1 4 4 8 2 1 0 1 7 /3 0 - 4 0
FM D - B S 1 5 0 1 5 0 1 6 4 4 8 2 6 0 1 7 /3 0 - 8 0
C o rn e r P ro file
FM D - B S/C 4 0 4 0 4 2 3 5 7 7 1 6 /3 0 4 7 1 3
FM D - B S/C 5 0 5 0 5 2 3 5 8 7 1 6 /3 0 4 7 1 6
FM D - B S/C 1 0 0 1 0 0 1 0 4 4 8 1 5 2 1 7 /3 0 4 4 4 0
FM D - B S/C 1 5 0 1 5 0 1 5 4 4 8 2 0 2 1 7 /3 0 4 4 8 0D imensions in mm
C/SB-DMFSB-DMF
Medium Duty • Screed Fix
CSK Headed Screws/Fischer Plugs
PAN Headed Screws/Fischer Plugs
PAN Headed Screws/Fischer Plugs
www.co rk j o in t .co m
1 3
X-Joint
www.x-calibur.us
Floor Joint Profiles
Medium Duty • Sreed FixFRA-BS
www.x-calibur.us1 4
FRA-BS
X-Joint Floor Joint Profiles
D e scrip t io nExtruded expansion joint for heavy pedestrian.
Installed beneath the screed.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .PVC J oint Seal
S up p ly L e n g t h sAluminium Pro
�le: 4 m
J oint Seal: 2 0 m rollsCustom lengths can be producedagainst minimum order.
P V C J o in t S e al C o lo ur
( O ther colors available subject to 5 0 0 m minimum order)
B lack B e ig e G re y
T y p e A B C D E * F T o t al M o v e m e n tF lat P ro fileFR A- B S 2 0 2 0 2 5 3 8 1 0 1 4 7 /7 2 - 1 2FR A- B S 3 0 3 0 3 5 4 5 1 2 5 3 1 /9 7 - 2 0FR A- B S 5 0 5 0 6 0 4 2 1 4 4 3 3 - 3 0FR A- B S 7 5 7 5 8 5 5 5 1 9 4 3 5 - 3 6FR A- B S 1 0 0 1 0 0 1 1 5 5 5 2 2 5 3 3 - 3 4FR A- B S 1 2 5 1 2 5 1 4 0 5 4 2 4 8 3 3 - 6 4FR A- B S 1 5 0 1 5 0 1 6 5 5 4 2 7 3 3 3 - 9 0C o rn e r P ro fileFR A- B S/C 2 0 2 0 2 2 3 8 6 0 4 7 /7 2 3 7 1 2FR A- B S/C 3 0 3 0 3 2 4 5 7 7 3 1 /9 7 6 3 2 0FR A- B S/C 5 0 5 0 5 5 4 2 9 7 3 3 6 3 3 0FR A- B S/C 7 5 7 5 8 0 5 5 1 3 5 3 5 6 8 3 6FR A- B S/C 1 0 0 1 0 0 1 0 7 5 5 1 6 2 3 3 8 3 3 4FR A- B S/C 1 2 5 1 2 5 1 3 2 5 4 1 8 6 3 3 8 3 6 4FR A- B S/C 1 5 0 1 5 0 1 5 7 5 4 2 1 1 3 3 8 3 9 0
D imensions in mm* O ther heights are available upon req uest
F R A -B S
F R A -B S / C
Medium Duty Screed Fix
X - T ite StrongSeal
X - T ite StrongSeal
PAN Headed Screws/Fischer Plugs
PAN Headed Screws/Fischer Plugs
CSK Headed Screws/Fischer Plugs
1 4
X-Joint
www.x-calibur.us
Floor Joint Profiles
Medium Duty • Surface FixFRA-SF
www.x-calibur.us1 5
X-Joint Floor Joint Profiles
T y p e A B C D E F T o t al M o v e m e n tF lat P ro file
FR A- SF 3 0 3 0 2 5 4 3 1 1 2 1 6 - 2 0FR A- SF 5 0 5 0 4 5 5 5 1 5 6 1 7 - 3 0FR A- SF 7 5 7 5 6 9 5 8 1 8 5 3 0 - 3 6FR A- SF 1 0 0 1 0 0 9 2 6 5 2 2 2 3 3 - 3 4FR A- SF 1 2 5 1 2 5 1 1 5 7 5 2 6 5 3 3 - 6 4FR A- SF 1 5 0 1 5 0 1 4 0 7 5 2 9 0 3 3 - 9 0
C o rn e r P ro file
FR A- SF/C 3 0 3 0 2 6 4 3 6 9 1 6 6 3 2 0FR A- SF/C 5 0 5 0 4 6 5 5 1 0 1 1 7 6 3 3 0FR A- SF/C 7 5 7 5 6 5 5 8 1 2 3 3 0 6 8 3 6FR A- SF/C 1 0 0 1 0 0 9 6 6 5 1 6 1 3 3 8 3 3 4FR A- SF/C 1 2 5 1 2 5 1 1 6 7 5 1 9 1 3 3 8 3 6 4FAR - SF/C 1 5 0 1 5 0 1 4 1 7 5 2 1 6 3 3 8 3 9 0
D imensions in mm
D e scrip t io nExtruded expansion joint for heavy pedestrian and slow moving vehicular traffi c.
Installed after completion of the fi nal fl oor fi nish.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 .PVC J oint Seals
S up p ly L e n g t h sAluminium Profile: 4 mJ oint Seals: 2 0 m rollsCustom lengths can be produced againtminimum order.
P V C J o in t S e al C o lo ur
( O ther colors available subject to 5 0 0 m minimum order)B lack B e ig e G re y
FRA-SF
F R A -S F / C
F R A -S F
Medium Duty Surface Fix
X - T iteStrongSeal
X - T iteStrongSeal
CSK Headed Screws/Fischer Plugs
CSK HeadedScrews /Fischer
Plugs
1 5
X-Joint
www.x-calibur.us
Floor Joint Profiles
Heavy Duty • Sreed FixFLP-2BS
www.x-calibur.us1 6
X-Joint Floor Joint Profiles
FLP-2BS Screed Fix
T y p e A B C D E T o t al M o v e m e n t
F lat P ro fileFL P- 2 B S 3 0 3 0 4 0 6 1 3 8 - 2 0FL P- 2 B S 5 0 5 0 6 0 6 1 3 8 - 3 5FL P- 2 B S 7 5 7 5 8 5 6 1 3 8 - 5 0FL P- 2 B S 1 0 0 1 0 0 1 1 0 6 1 3 8 - 6 0FL P- 2 B S 1 2 5 1 2 5 1 3 5 6 1 3 8 - 8 0FL P- 2 B S 1 5 0 1 5 0 1 6 0 6 1 3 8 - 1 0 0C o rn e r P ro fileFL P- 2 B S/C 3 0 3 0 3 0 6 1 3 6 6 0 2 0FL P- 2 B S/C 5 0 5 0 5 0 6 1 3 6 6 0 3 5FL P- 2 B S/C 7 5 7 5 7 5 6 1 3 6 6 0 5 0FL P- 2 B S/C 1 0 0 1 0 0 1 0 0 6 1 3 6 6 0 6 0FL P- 2 B S/C 1 2 5 1 2 5 1 2 0 6 1 3 6 6 0 8 0FL P- 2 B S/C 1 5 0 1 5 0 1 5 0 6 1 3 6 6 0 1 0 0
D imensions in mm
D e scrip t io nStainless steel fiwith high end � oor fi nishes. Installed beneath the screed.
M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6
S up p ly L e n g t h sAluminium Profile: 4 m
J oint Seals: 2 0 m rollStainless Steel Profile: 2 .4 4 m
Custom lengths can be produced againtsminimum order.
C/SB2-PLF
X - T ite StrongSealEPS J oint Seal
Stainless Steel
X - T ite Strong B ond
Cover plates: Stainless Steel ( non slip) 3 0 4 or 3 1 6 .J oint Seals: PVC / EPD M
nish expansion joint for use
X - T ite StrongB ond
X - T ite StrongSeal
or X - R oc R esiCrete S
F L P -2 B S
EPS J oint Seal
Stainless Steel
PAN Headed Screws/Fischer Plugs
PAN Headed Screws/Fischer Plugs
CSK Headed Screws/Fischer Plugs
1 6
X-Joint
www.x-calibur.us
Floor Joint Profiles
Seismic • Surface FixCPS-F
www.x-calibur.us1 7
F S J -B S / C
CPS-F
X-Joint Floor Joint Profiles
Seismic Surface Fix
D e scrip t io nHigh movement ( seismic) expansion joint covers for use in car park s and areas subject to vehicular traffi c.
Installed after completion of the fi nal � oor fi nish.
M at e rialsAnodized aluminium 6 0 6 3 /T 6
Anodized aluminium 6 0 6 3 /T 6Stainless steel ( non slip) 3 0 4 or 3 1 6
S up p ly L e n g t h sB ase s: 4 m C o v e r P lat e s: Aluminium: 4 mStainless Steel: 2 .4 mCustom lengths can be produced against minimum order.
T y p e A B H P lat eT h ick n e ss M o v e m e n t
F lat P ro fileCPS- F 7 5 7 5 1 7 5 6 0 3 ± 3 7CPS- F 1 0 0 1 0 0 1 9 0 6 0 3 ± 5 0CPS- F 1 2 5 1 2 5 2 2 5 6 0 4 ± 6 2CPS- F 1 5 0 1 5 0 2 5 0 6 0 4 ± 7 5CPS- F 2 0 0 2 0 0 3 0 0 6 0 6 ± 1 0 0CPS- F 2 5 0 2 5 0 3 7 5 6 0 6 ± 1 2 5CPS- F 3 0 0 3 0 0 4 5 0 6 0 9 ± 1 5 0CPS- F 3 5 0 3 5 0 5 2 5 6 0 9 ± 1 7 5CPS- F 4 0 0 4 0 0 6 0 0 6 0 1 2 ± 2 0 0CPS- F 4 5 0 4 5 0 6 7 5 6 0 1 2 ± 2 2 5CPS- F 5 0 0 5 0 0 7 5 0 6 0 1 2 ± 2 2 5
C o rn e r P ro fileCPS- F/C 7 5 7 5 1 2 5 4 0 4 ± 1 8CPS- F/C 1 0 0 1 0 0 1 4 5 4 0 4 ± 2 5CPS- F/C 1 2 5 1 2 5 1 7 5 4 0 6 ± 3 1CPS- F/C 1 5 0 1 5 0 2 1 1 4 0 6 ± 3 7CPS- F/C 2 0 0 2 0 0 2 5 0 4 0 8 ± 5 0CPS- F/C 2 5 0 2 5 0 3 1 2 4 0 8 ± 6 2CPS- F/C 3 0 0 3 0 0 3 7 5 4 0 1 0 ± 7 5CPS- F/C 3 5 0 3 5 0 4 3 7 4 0 1 0 ± 8 7CPS- F/C 4 0 0 4 0 0 5 0 0 4 0 1 2 ± 1 0 0CPS- F/C 4 5 0 4 5 0 5 6 2 4 0 1 2 ± 1 1 5CPS- F/C 5 0 0 5 0 0 6 2 5 4 0 1 2 ± 1 2 5
D imensions in mm
F S J -B SX - PrufPolyliner PVC
X - PrufPolyliner PVC
X - T iteStrongSeal
X - T iteStrongSeal
C o v e r p lat e s:B ase s:
1 7
X-Joint
www.x-calibur.us
Floor Joint Profiles
Seismic • Sreed FixCPS-R
www.x-calibur.us1 8
C P S -R C P S -R / C
CPS-R
X-Joint Floor Joint Profiles
Seismic Screed Fix
M at e rialsB ase s: Anodized aluminium 6 0 6 3 /T 6C o v e r p lat e s: Anodized aluminium 6 0 6 3 /T 6Stainless steel ( non slip) 3 0 4 or 3 1 6
S up p ly L e n g t h sB ase s: 4 mC o v e r p lat e s: Aluminium: 4 mStainless steel: 2 .4 mCustom lengths can be produced against minimum order.
T y p e A B C D * E * F * H
F lat P ro fileCPS- R 5 0 5 0 1 2 9 8 0 1 6 1 5 2 4 2 9 ± 3 7CPS- R 7 5 7 5 1 5 4 1 0 0 1 9 1 3 2 7 2 9 ± 5 0CPS- R 1 0 0 1 0 0 1 7 9 1 5 0 6 2 5 1 4 2 9 ± 6 2CPS- R 1 2 5 1 2 5 2 0 4 1 7 0 9 2 3 1 7 2 9 ± 7 5CPS- R 1 5 0 1 5 0 2 2 9 2 0 0 6 2 5 1 4 2 9 ± 1 0 0CPS- R 1 7 5 1 7 5 2 5 4 2 2 5 6 2 5 1 4 2 9 ± 1 2 5CPS- R 2 0 0 2 0 0 2 7 9 2 5 0 6 2 5 2 7 2 9 ± 1 5 0C o rn e r P ro fileCPS- R /C 5 0 5 0 9 0 6 5 1 7 1 5 2 5 2 ± 3 2CPS- R /C 7 5 7 5 1 1 5 8 8 1 9 1 1 2 7 2 9 ± 3 0CPS- R /C 1 0 0 1 0 0 1 4 0 1 2 5 7 2 5 1 5 2 9 ± 3 2CPS- R /C 1 2 5 1 2 5 1 6 5 1 4 8 9 2 3 1 7 2 9 ± 3 2CPS- R /C 1 5 0 1 5 0 1 9 0 1 7 5 7 2 5 1 5 2 9 ± 3 2CPS- R /C 1 7 5 1 7 5 2 1 5 2 0 0 7 2 5 1 5 2 9 ± 3 2CPS- R /C 2 0 0 2 0 0 2 4 0 2 2 5 7 2 5 1 5 2 ± 3 2
D imensions in mm
D e scrip t io nHigh movement ( seismic) expansion joint covers for use in car park s and areas subject to vehicular traffi c.
Installed beneath the screed.
X - T iteStrongSeal
X - R oc R esiCrete S
X - R ocR esiCrete S
X - T iteStrongSeal
X - PrufPolyliner PVC
X - PrufPolyliner PVC
33 03 03 03 03 03 03 0
3344669
333333
P lat eT h ick n e ss M o v e m e n tH 1
PAN Headed Screws/Fischer Plugs
1 8
X-Joint
www.x-calibur.us
Floor Joint Profiles
Seismic • Surface FixFSJ-BS
www.x-calibur.us1 9
FSJ - BS
X-Joint Floor Joint Profiles
Seismic Screed Fix
T y p e A * B C D E T o t al M o v e m e n t
F lat P ro file
FSJ - B S 5 0 5 0 1 2 0 5 7 5 - 8 5
FSJ - B S 1 0 0 1 0 0 1 7 0 5 7 5 - 1 3 5
FSJ - B S 1 2 5 1 2 5 2 2 0 5 7 5 - 1 8 5
FSJ - B S 1 5 0 1 5 0 2 2 0 5 7 5 - 1 8 5
C o rn e r P ro file
FSJ - B S/C 7 5 7 5 1 2 0 4 7 5 6 0 9 0
FSJ - B S/C 1 0 0 1 0 0 1 7 0 4 7 5 6 0 1 4 0
FSJ - B S/C 1 5 0 1 5 0 2 2 0 4 7 5 6 0 1 9 5D imensions in mm* M aximum D imension
F S J -B S / CF S J -B S
D e scrip t io nL arge movement seismic fl oor joint covers with a concealed fixing system that eliminates the use of screws.
Installed beneath the screed.
M at e rialsAnodized aluminium 6 0 6 3 /T 6
S up p ly L e n g t h s4 m, custom lengths can be produced against minimum order.
X - PrufPolyliner PVC
X - PrufPolyliner PVC
PAN Headed Screws/Fischer Plugs PAN Headed Screws
/Fischer Plugs
1 9
X-Joint
www.x-calibur.us
Floor Joint Profiles
Seismic • Sreed FixFFJ-BS
www.x-calibur.us2 0
FFJ-BS
X-Joint Floor Joint Profiles
M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6PVC J oint Seals.
S up p ly L e n g t hAluminium Profile: 4 mJ oint Seals: 2 0 m rollsCustom lengths can be produced against minimum order.
( O ther colors available subject to 5 0 0 m minimum order)
B lack B e ig e G re y
F F J -B S
tnemevoM latoTCBAepyT
F lat P ro file
520 /4 730 2 0
2 0
2 03 0
5 0
7 5
7 5
202 SB-JFF
04130303 SB-JFF
06330505 SB-JFF
3
07535757 SB-JFF
1 2 03 51 5 01 5 0SB-JFF
0933001001 SB-JFF
1 6 633002002 SB-JFFD imensions in mm
X - Pruf Polyliner PVC
X - T ite StrongSeal( B oth Sides)
X - T ech Epoxy Floor SL U
X - J oint FR A- B S
B
C
X - J oint FR A- B S
D e scrip t io nL arge movement seismic expansion joint for use with thin fl oor fi nishes, such as tile, vinyl or carpet, with minimum effect of the appearance of the fl oor.
Installed beneath the fl oor screed.
Seismic Screed Fix
P V C J o in t S e al C o lo ur
PAN Headed Screws/Fischer Plugs
7 5
2 0
X-Joint
www.x-calibur.us
Tile & Screed
Screed FixCJ1
www.x-calibur.us2 1
C J 1
CJ1
X-Joint Tile & Screed
T y p e A B C D T o t al M o v e m e n t
CJ 1 1 4 /5 5 9 1 4 2 ± 2
CJ 1 1 4 /8 8 1 2 1 4 2 ± 2
CJ 1 2 0 /5 5 9 2 0 2 ± 2
CJ 1 2 0 /8 8 1 2 2 0 2 ± 2
CJ 1 3 0 /8 8 1 2 3 0 2 ± 2
CJ 1 4 0 /8 8 1 2 4 0 2 ± 2
CJ 1 5 0 /8 8 1 2 5 0 2 ± 2
CJ 1 5 0 /1 0 1 0 1 4 5 0 2 ± 2
CJ 1 7 5 /8 8 1 2 7 5 2 ± 2
CJ 1 8 0 /1 0 1 0 1 4 8 0 2 ± 2D imensions in mm
D e scrip t io nAnodized aluminum neoprene construction joint for use with tiles and stone.
Installed when floor finish is being laid.
M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6 ( Stainless Steel or B rass available upon req uest) .
Santoprene or N eoprene joint strip. ( EPD M )
J o in t S t rip C o lo ur
Custom size can be produced upon req uest
Surface Fix
B lack B e ig e G re y
( O ther colors available subject to 5 0 0 m minimum order)
Santoprene/N eoprenejoint strip
2 1
X-Joint
www.x-calibur.us
Tile & Screed
Screed FixCJ2
www.x-calibur.us2 2
D e scrip t io nAnodized aluminum construction joint for use with tiles and stone.
Installed beneath the screed
M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6 Santoprene & N eoprene joint strip ( EPD M )
J o in t S t rip C o lo ur
( O ther colors available subject to 5 0 0 m minimum order)
CJ2
X-Joint Tile & Screed
T y p e A B C D E T o t al M o v e m e n t
CJ 2 1 4 /5 5 9 1 4 2 5 2 - 4 + 2
CJ 2 1 4 /8 8 1 2 1 4 2 5 2 - 4 + 2
CJ 2 2 5 /8 8 1 2 2 5 2 5 2 - 4 + 2
CJ 2 3 2 /8 8 1 2 3 2 5 0 2 - 4 + 2
CJ 2 4 2 /8 8 1 2 4 2 5 0 2 - 4 + 2
CJ 2 5 0 /8 8 1 2 5 0 5 0 2 - 4 + 2
CJ 2 7 5 /8 8 1 2 7 5 5 0 2 - 4 + 2D imensions in mm
CJ2
B lack B e ig e G re y
Custom sizes can be produced upon req uest
Santoprene/N eoprenejoint strip
Screed Fix
C J 2
2 2
X-Joint
www.x-calibur.us
Tile & Screed
Screed FixCJ3
www.x-calibur.us23
X-Joint Tile & Screed
Type A B C D E Total Movement
CJ3 40/10 10 13 40 30 1.5 ±2
CJ3 50/10 10 13 50 30 1.5 ±2
CJ3 60/10 10 13 60 30 1.5 ±2
CJ3 80/10 10 13 80 40 1.5 ±2
CJ3 100/10 10 13 100 40 1.5 ±2Dimensions in mm
DescriptionStainless steel neoprene construction joint for use with tiles and stone.
Installed when floor finish is being laid.
Materials• Stainless steel strip 304 or 316 (Anodized aluminium 6063/T6 and brass available upon request).• Santoprene or Neoprene joint strip• X-Seal JointBoard P60 (Refer to Product Datasheet)• Nelson Stud Grade 304 Size: M6x30mm
Joint Strip Colour
(Other colors available subject to 500m minimum order)
CJ3
Black Beige Grey
CJ3
Custom sizes can be produced upon request
Screed Fix
CJ3
Santoprene/Neoprene
Nelson Stud Grade 304(Size: M6x30mm)
joint strip
X-Seal Joint Board P60
2 3
X-Joint
www.x-calibur.us
Tile & Screed
Screed FixCJ4
www.x-calibur.us24
Type A B C D Total Movement
CJ4 20/6 6 10 20 2 ±2
CJ4 30/6 6 10 30 2 ±2
CJ4 40/6 6 10 40 2 ±2
CJ4 50/6 6 10 50 2 ±2
CJ4 7 5/6 6 10 7 5 2 ±2
CJ4 80/6 6 10 80 2 ±2Dimensions in mmCustom sizes can be produced upon request
X-Joint Tile & Screed
CJ4
DescriptionAnodized aluminum poly urethane/poly ethy lene construction joint for use with tiles and stone. Accepts higher movement than neoprene.
Installed when floor finish is being laid.
Materials• Anodized aluminium 6063/T6 (Stainless steel and brass available upon request).• One component poly urethane sealant • F oam PV C or E PDM (sub-lay er)
Supply L ength s3m, custom size can be produced upon request
Poly urethane sealant
F oam PV C or E PDM
Surface Fix
2 4
X-Joint
www.x-calibur.us
Tile & Screed
Screed FixAJS
www.x-calibur.us25
AJS
X-Joint Tile & Screed
DescriptionE xtruded anodized aluminium joint separators for screed and fl oor fi nishes.
MaterialsAnodized aluminium 6063/T6
Supply L ength s3m or 6m, can be cut to exact installation length prior to delivery .
05 SJA 52 SJA
Screed Fix
1.8
2
2.5 3
2 5
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Surface FixSWJ1
www.x-calibur.us2 6
X-Joint Wall & Ceiling Profiles
SWJ1
D ECBepyT
F lat P ro file
04/011 1JWS
A
07/021 1JWS
SW J 1 1 4 5 /1 0 0
SW J 1 1 8 5 /1 4 0
C o rn e r P ro file
07 C/1JWS
021 C/1JWS
541 C/1JWS
581 C/1JWS
* Can be used in horizontal applications subject to pedestrian loads.
D e scrip t io nExtruded aluminum joint covers used to cover exterior and interior joints on fi nished walls and ceilings.
M at e rialsAnodized aluminium 6 0 6 3 /T 6 Can also be supplied in mill fi nish and powdercoated aluminum.
S up p ly L e n g t h s3 m, custom lengths can be produced against minimum order.
S W J 1 S W J 1 / C
Surface Fix
SW J 1 2 6 0 /1 8 0
SW J 1 3 2 5 /2 0 0
CSK Headed Screws / Fischer Plugs
CSK Headed Screws / Fischer Plugs
2 0 - 4 0
4 5 - 6 0
6 5 - 8 0
8 5 - 1 0 0
1 0 0 - 1 5 0
1 5 5 - 2 0 0
1 1 0
1 1 7
1 4 5
1 8 5
2 6 0
3 2 5
3 .5
3 .5
5 .0
6 .0
6 .0
6 .0
3 .5
3 .5
5 .0
6 .0
6 .0
6 .0
1 .7
1 .7
1 .7
2 .5
3 .5
3 .8
5 0
1 0 0
1 2 0
1 5 0
6 7
1 1 7
1 3 7
1 6 7
3 .5
3 .8
6 .0
5 .0
5 0
5 0
5 0
5 0
1 .5
2 .0
3 .5
3 .0
2 6
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Concealed FixingCWJ1
www.x-calibur.us2 7
Wall & Ceiling ProfilesX-Joint
CWJ1 Concealed Fixing
T y p e A B C D H H 1 M o v e m e n t
F lat P ro file
CW J 1 5 0 5 0 1 1 7 3 5 2 2 - 8 4 ( + 4 3 - 4 1 )
CW J 1 7 5 7 5 1 1 7 3 5 2 2 - 8 4 ( + 1 8 - 6 6 )
CW J 1 1 0 0 1 0 0 1 6 7 3 5 2 2 - 1 3 4 ( + 4 3 - 9 1 )
CW J 1 1 2 5 1 2 5 2 1 9 3 5 2 2 - 1 8 6 ( + 7 0 - 1 1 6 )
CW J 1 1 5 0 1 5 0 2 1 9 3 5 2 2 - 1 8 6 ( + 4 5 - 1 4 1 )
C o rn e r P ro fileCW J 1 /C 5 0 5 0 9 5 4 5 5 0 9 5 ( - 5 0 + 4 5 )
CW J 1 /C 7 5 7 5 9 5 4 5 5 0 9 5 ( - 7 5 + 2 0 )
CW J 1 /C 1 0 0 1 0 0 1 6 0 4 5 5 0 1 6 0 ( - 1 0 0 + 6 0 )
CW J 1 /C 1 2 5 1 2 5 2 0 5 4 5 5 0 2 0 5 ( - 1 2 5 + 8 0 )
CW J 1 /C 1 5 0 1 5 0 2 0 5 4 5 5 0 2 0 5 ( - 1 5 0 + 5 5 )D imensions in mm
D e scrip t io nExtruded aluminium joint covers used to cover exterior and interior joints on finished walls and ceilings, with no visible fi xings.
M at e rialsAnodized aluminium 6 0 6 3 /T 6Also available in mill finish / powder coated.
S up p ly L e n g t h s3 m, other widths ( B ) available with pre- formedaluminium plates.
C W J 1 / C C W J 1with wall/ceiling support
W all
Ceiling
support
wall corner/ceiling corner support
W all
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
1 0 .5
2 7
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Surface FixSWJ2
www.x-calibur.us28
Type A B C D E Total Movement*
F lat P rofile
SW J2 25 25 9 5 35 11 - 55
SW J2 50 50 120 35 11 - 100
SW J2 7 5 7 5 145 35 11 - 150
SW J2 100 100 17 0 35 11 - 200
SW J2 125 125 19 5 35 11 - 250
SW J2 150 150 220 35 11 - 300
Corner P rofile
SW J2/C 25 25 60 35 11 35 55
SW J2/C 50 50 85 35 11 35 100
SW J2/C 7 5 7 5 110 35 11 35 150
SW J2/C 100 100 135 35 11 35 200
SW J2/C 125 125 160 35 11 35 250
SW J2/C 150 150 185 35 11 35 300Dimensions in mm
DescriptionH igh movement capacity anodized aluminum/PV C weather seal expansion joint for use in walls and ceilings in internal and external applications.
MaterialsBase: Anodized aluminium 6063/T6Special PV C joint seals resistant to sunlight
Supply L ength sAluminium Profile: 3m PV C Joint Seals: 50mCustom lengths can be produced to order.
P V C Joint Seals Colour
(Other colors available subject to 500m minimum order)
X-Joint
SWJ2
Black Beige Grey
* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )
SW J2
SW J2 / C
Wall & Ceiling Profiles
X-TiteStrongSeal
X-TiteStrongSeal
Surface Fix
2 8
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Concealed FixingCWJ2
www.x-calibur.us29
Corner P rofile
CW J2/C 25 25 30 30 18 41 50
CW J2/C 50 50 47 30 18 41 60
CW J2/C 7 5 7 5 66 30 18 41 9 5
CW J2/C 100 100 9 1 30 18 41 152
CW J2/C 125 125 116 30 18 41 185
CW J2/C 150 150 145 30 18 41 17 0Dimensions in mm
X-Joint
CWJ2
* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )
Type A B C D E Total Movement*
F lat P rofile
CW J2 25 25 43 30 18 - 50
CW J2 50 50 64 30 18 - 60
CW J2 7 5 7 5 9 0 30 18 - 9 5
CW J2 100 100 114 30 18 - 152
CW J2 125 125 140 30 18 - 185
CW J2 150 150 165 30 18 - 17 0
CW J2 / C
Concealed Fixing
DescriptionAnodised aluminum expansion joint with integrated weather seal for use in wall and ceilings.
Installed beneath the plaster or wall board to provide a fl ush fi nish with no visible fi xings.
MaterialsAnodized aluminium 6063/T6 in neutral color.Special PV C joint seals, resistant to sunlight.
Supply L ength sAluminium Profi le: 3mPV C Joint Seals: 50mCustom lengths can be produced to order.
Wall & Ceiling Profiles
CW J2
X-TiteStrongSeal
X-TiteStrongSeal PAN H eaded Screws
/F ischer Plugs
2 9
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Surface FixSWJ3
www.x-calibur.us30
X-Joint
SWJ3
DescriptionAnodised aluminum expansion joint with integrated weather seal for use in wall and ceilings. F ixed directly on to the fi nished wall surface.
MaterialsAnodized aluminium 6063/T6PV C Joint Seals
Supply L ength sAluminium Profi le: 3mPV C Joint Seals: 50mCustom lengths can be produced to order.
Type A B C D E Total Movement*
F lat P rofile
SW J3 25 25 9 5 35 11 - 50
SW J3 50 50 120 35 11 - 60
SW J3 7 5 7 5 145 35 11 - 9 5
SW J3 100 100 17 0 35 11 - 152
SW J3 125 125 19 5 35 11 - 185
SW J3 150 150 220 35 11 - 17 0
Corner P rofile
SW J3/C 25 25 60 35 11 35 50
SW J3/C 50 50 85 35 11 35 60
SW J3/C 7 5 7 5 110 35 11 35 9 5
SW J3/C 100 100 135 35 11 35 152
SW J3/C 125 125 160 35 11 35 185
SW J3/C 150 150 185 35 11 35 17 0Dimensions in mm* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )
Surface Fix
Wall & Ceiling Profiles
SW J3
X-TiteStrongSeal
SW J3/ C
X-TiteStrongSeal
CSK H eaded Screws/F ischer Plugs
CSK H eaded Screws/F ischer Plugs
3 0
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Dry Walls, Installation Under PlasterCWJ3
www.x-calibur.us31
X-Joint
CWJ3
Black Beige Grey
Type A B C D E Total Movement*
F lat P rofileCW J3 20 20 25 37 9 9 10 15CW J3 30 30 35 37 110 13 20CW J3 50 50 56 35 126 13 30CW J3 7 5 7 5 84 35 154 13 36CW J3 100 100 111 32 17 5 13 34CW J3 125 125 140 35 210 13 64CW J3 150 150 165 35 235 13 9 0
Corner P rofileCW J3/C 20 20 22 37 59 10 15CW J3/C 30 30 32 37 68 13 20CW J3/C 50 50 53 35 88 13 30CW J3/C 7 5 7 5 7 8 35 113 13 36CW J3/C 100 100 105 32 136 13 34CW J3/C 125 125 130 35 165 13 64CW J3/C 150 150 155 35 19 0 13 9 0
Dimensions in mm* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )
DescriptionE xtruded aluminum/PV C expansion joints for use on internal applications for walls and ceilings with gy psum board or before plastering.
MaterialsAnodized aluminium 6063/T6PV C Joint Seals
Supply L ength sAluminium Profi le: 4mJoint Seals 25mCustom lengths can be produced to order.
P V C Joint Seals Colour
(Other colors available subject to 500m minimum order)
CW J3
CW J3/ C
Dry Walls, Installation Under Plaster
Wall & Ceiling Profiles
X-TiteStrongSeal
X-TiteStrongSeal
PAN H eaded Screws/F ischer Plugs
3 1
X-Joint
www.x-calibur.us
Wall & Ceiling Profiles
Surface FixSWJ4
www.x-calibur.us32
X-Joint
SWJ4
Black Beige Grey
Type A B C D E F Total Movement*
F lat P rofile
SW J4 20 20 15 38 9 1 16 - 12
SW J4 30 30 26 43 112 16 - 20
SW J4 50 50 46 55 156 17 - 30
SW J4 7 5 7 5 69 58 185 30 - 36
SW J4 100 100 9 6 65 226 33 - 34
SW J4 125 125 115 7 5 265 33 - 64
SW J4 150 150 140 7 5 29 0 33 - 9 0
Corner P rofile
SW J4/C 20 20 18 38 56 16 37 12
SW J4/C 30 30 26 43 69 16 63 20
SW J4/C 50 50 46 55 101 17 69 30SW J4/C 7 5 7 5 65 58 123 30 68 36
SW J4/C 100 100 9 6 65 161 33 87 34
SW J4/C 125 125 116 55 17 1 17 69 64
SW J4/C 150 150 141 55 19 6 17 69 9 0
Dimensions in mm
DescriptionAnodised aluminum expansion joint with visible weatherseal for interior joints on walls and ceilings. F ixed directly onto the fi nished wall/ceiling surface.
MaterialsAnodized aluminium 6063/T6PV C Joint Seals
Supply L ength sAluminium Profi le: 4mJoint Seals: 25mCustom lengths can be produced to order.
P V C Joint Seal Colour
(Other colors available subject to 500m minimum order)
* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )
Finished Surfaces
Wall & Ceiling Profiles
SW J4 / C
SW J4
3 2
X-Joint
www.x-calibur.us
Roof Profiles
Screed FixRJ1
www.x-calibur.us33
X-Joint
RJ1
DescriptionF ully waterproof joint sy stem for roof joints 10mm to 100mm wide used to cover and sealjoints in accesible roofs.
MaterialsCover plate: Anodized aluminium grade 6063/T6(Stainless steel AISI 304 or 316 arealso available upon request).Joint Seals: U V Resistant PV C
Supply L ength sAluminium: 4mJoint Seals: 20m rollCustom lengths can be produced to order.
Type A B C D Total Movement*
F lat P rofileRJ1 10/15 10-15 117 5 33/45/7 5 20RJ1 15/20 15-20 117 5 33/45/7 5 30RJ1 20/30 20-30 117 5 33/45/7 5 40RJ1 30/40 30-40 117 5 33/45/7 5 50RJ1 40/50 40-50 17 0 5 33/45/7 5 65RJ1 50/80 50-80 17 0 5 33/45/7 5 100RJ1 80/100 80-100 17 0 5 33/45/7 5 120Corner P rofileRJ1/C 10/15 10-15 67 4 33/45/7 5 20RJ1/C 15/20 15-20 67 4 33/45/7 5 30RJ1/C 20/30 20-30 67 4 33/45/7 5 40RJ1/C 30/40 30-40 67 4 33/45/7 5 50RJ1/C 40/50 40-50 67 4 33/45/7 5 65RJ1/C 50/80 50-80 120 4 33/45/7 5 100RJ1/C 80/100 80-100 120 4 33/45/7 5 120
Dimensions in mm* Movements depend on the cover plate width
For roof joints 10mm to 100mm wide
Roof Profiles
R J1
X-TiteStrongSeal
X-PrufPoly liner PV C
E PS Joint Seal
Counter Sunk Anchor / Screws
PAN H eaded Screws/ F ischer Plugs
PAN H eaded Screws/ F ischer Plugs
CSK H eaded Screws/ F ischer Plugs
R J1 / C
X-PrufPoly liner PV C
X-TiteStrongSeal
E PS Joint Seal
3 3
X-Joint
www.x-calibur.us
Roof Profile
Screed FixRJ2
www.x-calibur.us34
DescriptionH igh movement (seismic) anodised aluminium/PV C wall joint for use with a wall fi nish up to
Joint support: W hite aluminium (Powder coated RAL 9 006)Joint Seals: U V Resistant PV C
Supply L ength sAluminium Profi le: 4mJoint Seal: 25m rollCustom lengths can be produced to order.
Type A B C D E Total Movement*
F lat P rofile
RJ2 50 50 117 4 45 - 7 0
RJ2 100 100 17 0 4 45 - 125
RJ2 150 150 219 4 45 - 180
RJ2 200 200 250 4 45 - 230
X-Joint Roof Profiles
RJ2
Corner P rofile
RJ2/C 50 50 7 0 4 45 50 60
RJ2/C 100 100 120 4 45 50 120
RJ2/C 150 150 169 4 45 50 200
RJ2/C 200 200 17 0 4 45 50 320Dimensions in mm* Movements depend on the cover plate width
For roof joints 50mm to 200mm wide
R J2 / C
X-PrufPoly L iner PV C
X-TiteStrongSeal
E PS H M E PS H M
R J2
X-PrufPoly L iner PV C
X-TiteStrongSeal
PAN H eaded Screws/F ischer Plugs
PAN H eaded Screws/F ischer Plugs
Cover plate: Anodized aluminium 6063/T6Materials
16mm thick . Joint must be fixed onto a concrete or masonary substrate.
CSK H eaded Screws/ F ischer Plugs
3 4
X-Joint
www.x-calibur.us
Roof Profile
Surface FixRJ3
www.x-calibur.us35
X-Joint Roof Profiles
RJ3 Fully waterproof joint systems for roof joints
DescriptionH igh movement (seismic) anodised aluminium/PV C wall joint for use with a wall fi nish up tpo 16mm thick . Joint must fi xed on to a concrete or masonary substrate.
MaterialsJoint plate: 2mm thick preformed galvanized sheetF ixing strip: Mill fi nish aluminiumW aterproofi ng membrane: X-Pruf Poly liner PV C
Supply L ength sJoint plate: 2.44mF ixing strip: 3mMembrane: 25mCustom lengths can be produced to order.
Type A TotalMovement
F lat P rofile
RJ3 50 50 50
RJ3 100 100 100
RJ3 150 150 150
RJ3 200 200 200
Corner P rofile
RJ3/C 50 50 50
RJ3/C 100 100 100
RJ3/C 150 150 150
RJ3/C 200 200 200Dimensions in mm
R J3
X-Joint PP 58
Countersunk screwwith plastic plug
2mm thickpreformed G.I. sheet
X-Pruf Poly L iner PV C
X-Tite StrongSeal
R J3/ C
X-Joint PP 58
CSK H eaded Screws/F ischer Plugs
2mm thick preformed G.I. sheet
X-Pruf Poly L iner PV C
X-Pruf Poly L iner PV Cbonded withX-Tite StrongSeal
X-TiteStrongSeal
3 5
X-Joint
www.x-calibur.us
ClipStrips
ClipStrips
www.x-calibur.us36
DescriptionRange of extruded aluminum joint covers that are suitable for use in a wide range of internal and external applications in commercial, institutional and industrial buildings. W hile aesthetically pleasing they are particularly useful for protection of elastomeric joint sealants and fi re barriers.
MaterialsAnodized aluminium 6063/T6 or mill fi nish aluminum.
Polished fi nish and powder coated profi les can be provided in a wide range of colors.
Supply L ength s3m or 6m lengthsCustom lengths can be produced to order.
X-Joint Clip Strips
ClipStrips
Floor Profiles
Wall Profiles
Corner Profile
Spring Clips
P rof ile Type P rof ile W id th Joint W id th
F loor P rofilesF 45C 45 15 to 20F 55C 55 20 to 35F 55F 55 20 to 35F 7 0F 7 0 30 to 45
W all P rofilesW 55G 55 20 to 35W 7 0C 7 0 15 to 50
Spring ClipsSS40 40 20 to 30SS60 60 30 to 50
Dimensions in mm
Corner P rofilesC50 53 15 to 50
F 4 5 C and F 5 5 C
W 7 0 C
C5 0
SS4 0 and SS6 0
W 5 5 G
F 5 5 F and F 7 0 F
X-Seal PS800 orX-Tite StrongSeal
SpringClips
X-SealJointBoard
SpringClips
ClipStripsClipStrips
Surface Fix
3 6
X-Joint
www.x-calibur.us
Joint Seals
Seismic • Surface FixEPS
www.x-calibur.us3 7
X-Joint Joint Seals
EPS Surface �x
D e scrip t io nSeismic waterproofing expansion joint sealsfor use in mechanical expansion joints
M at e rialsSpecial PVC resistant to sunlight
J o in t S e al C o lo ur
( O ther colours available subject to 5 0 0 m minimum order)
tnemevoM latoTCBAepyT02020251-0102/02 SPE
03030302-5103/03 SPE
04530403-0253/04 SPE
05040504-0304/05 SPE
56055605-0405/56 SPE
0018400108-0584/001 SPE
02106521001-0806/521 SPED imensions in mm
B lack B e ig e G re y
X - T ite StrongSealX - T ite StrongSeal X - T ite StrongSeal X - T ite StrongSeal
3 7
X-Joint
www.x-calibur.us
Joint Seals
Seismic • Surface FixEPS-HM
www.x-calibur.us38
X-Joint Joint Seals
EPS HM Heavy Duty Surface Fix
DescriptionH igh movement (seismic) waterproofing expansionjoints for use in vertical and horizontal applicationssuch as walls and slabs
MaterialsP rofi : Anodized aluminiun 6063/T6 natural finish Joint Seals: U V resistant PV C or Santoprene
Supply L ength sAluminium Profile: 3 or 4mJoint Seals: 25m rollCustom lengths can be produced to order.
Colour
(Other colors available subject to 500m minimum order)
Type A B C TotalMovement
E PS H M 50 50 58 25 50
E PS H M 100 100 58 25 100
E PS H M 150 150 58 25 150
E PS H M 200 200 58 25 200Dimensions in mm
Black Beige Grey
EP S H M 5 0
EP S H M 1 0 0
EP S H M 1 5 0
EP S H M 2 0 0
X-Tite StrongSealX-Tite StrongSeal
X-TiteStrongSeal
3 8
X-Joint
www.x-calibur.us
Joint Seals
Seismic • Surface FixEPS-HD
www.x-calibur.us3 9
X-Joint Joint Seals
EPS-HD Seismic Surface Fix
D e scrip t io nPre- formed heavy duty joint seal for use in mechanical expansion joints
M at e rialsProfi le: Anodized aluminiun 6 0 6 3 /T 6 natural fi nishJ oint insert: U V resistant PVC or Santoprene
S up p ly L e n g t h sAluminium Profi le: 3 or 4 mJ oint Seals: 2 5 mCustom lengths can be produced to order.
C o lo ur
B lack G re y
T y p e A BJ o in tW id t h s
T o t alM o v e m e n t ( + / -)
D imensions in mm
EPS-HD 25EPS-HD 50EPS-HD 75EPS-HD 100EPS-HD 125EPS-HD 150EPS-HD 200
10-2530-5055-75
80-100105-125130-150155-200
305582
110137165225
20404550556060
152535506075
100
3 9
X-Joint
www.x-calibur.us
Stair Nosings
Surface FixSN
www.x-calibur.us40
X-Joint Stair Nosings
SN
Type A B
SN 45 AA/1 45 23
SN 45 AA/2 45 13
SN 45 RS 45 13
SN 45 CarboTM 1 45 13
SN 45 CarboTM 2 45 23Dimensions in mm
SN 4 5 AA1
SN 4 5 R S
SN 4 5 CarboTM 1
SN 4 5 CarboTM 2
A
B
A
B
A
B
A
B
B
SN 4 5 AA2
DescriptionAnodized aluminium stair nosings.
MaterialsAnodized aluminium 6063/T6Insert SN45 RS E PDM onlyInsert SN45 CarboTM only : CarboTM anti-slip grains embedded in epoxy resin.
Supply L ength s3m or 6m lengthsCan be cut to exact installation length prior to delivery .
A
Surface Fix
4 0
X-Joint
www.x-calibur.us
Floor Skirting
Surface FixSkirting
www.x-calibur.us4 1
X-Joint Floor Skirting
Skirting
T y p e A B
Sk irting 1 0 0 1 0 0 1 .7Sk irting 1 5 0 1 5 0 2 .5
A
B
D e scrip t io nAnodized aluminium floor sk irtingInstalled after the completion of floor finish
M at e rialsAnodized aluminium grade 6 0 6 3 /T 6Can be in mill finish/powder coated
S up p ly L e n g t h sStandard length is 3 m. Custom lengths can beproduced against our minimum order level.
Surface FixW
all
D imensions in mm
Floor
www.x-calibur.us2
Selected Projects
Singapore
New Doha
International Airport
Doha Qatar
Vietnam
Abu Dhabi
SAVICO
Ho Chi Minh
Oasis Hospital Development
Al Ain
Abu Dhabi
Eastern Mangrove
Hotel Apartments
www.x-calibur.us
Oman National
Museum
Majilis, Oman
Singapore Expo Convention
& Exhibition Centre
4 1 www.x-calibur.uswww.x-calibur.us2
Selected Projects
Singapore
New Doha
International Airport
Doha Qatar
Vietnam
Abu Dhabi
SAVICO
Ho Chi Minh
Oasis Hospital Development
Al Ain
Abu Dhabi
Eastern Mangrove
Hotel Apartments
www.x-calibur.us
Oman National
Museum
Majilis, Oman
Singapore Expo Convention
& Exhibition Centre
4 2 www.x-calibur.uswww.x-calibur.us2
Selected Projects
Yas Island,
Marina Hotel
and F1 Circuit
Abu Dhabi
Emirates
Financial Towers
Dubai
Dubai
Dubai
Hamdan Bin Mohammed Bin
Rashid Sports Complex
American School
Dubai
SkyCourts
www.x-calibur.us
Iranian Hospital
Dubai
4 3 www.x-calibur.uswww.x-calibur.us2
Selected Projects
Sharjah
Al Ain Stadiumand
Mixed Use Development
Al Ain
Dubai
Abu Dhabi
Silicon Oasis
Al Fahidi Market
Bur Dubai
City of Lights
Al Reem Island
Development
www.x-calibur.us
Al Waha Tower
Sharjah
Al Jubail Market
Government of Sharjah
X -C alibur W o rld wid e
X -C alibur C o n st ruct io n S y st e m s I n c. ( U S A )Phone: ( 9 5 4 ) 7 4 5 6 1 6 0Email: usa@ x- calibur.us
Q E D X -C alibur L im it e dPhone: ( 0 1 1 7 ) 9 7 5 8 6 0 4Email: uk @ x- calibur.co
X -C alibur I n t e rn at io n al F Z C( Asia, Arabia and Africa Headq uarters Export & Franchise Enq uiries)Phone: ( + 9 7 1 ) 6 5 7 4 8 2 2 8Email: export@ x- calibur.us
X -C alibur E m irat e sPhone: ( + 9 7 1 ) 0 6 5 3 5 2 0 2 3Email: uae@ x- calibur.us
X -C alibur Q at ar - M J K G ro up ( M anufacturing L icensee)Phone: ( + 9 7 4 ) 4 4 8 8 8 0 3 5Email: q atar@ x- calibur.co
T h o ro n X -C alibur L t d ( J o in t V e n t ure )( M ember of the T horon G roup)Phone: 0 2 8 3 8 9 3 9 3Email: hk @ x- calibur.co
X -C alibur C o n st ruct io n S y st e m s I n c. ( U S A )Phone: ( 9 5 4 ) 7 4 5 6 1 6 0Email: usa@ x- calibur.us
Q E D X -C alibur L im it e dPhone: ( 0 1 1 7 ) 9 7 5 8 6 0 4Email: uk @ x- calibur.co
X -C alibur I n t e rn at io n al F Z C( Asia, Arabia and Africa Headq uarters Export & Franchise Enq uiries)Phone: ( + 9 7 1 ) 6 5 7 4 8 2 2 8Email: export@ x- calibur.us
X -C alibur E m irat e sPhone: ( + 9 7 1 ) 0 6 5 3 5 2 0 2 3Email: uae@ x- calibur.us
X -C alibur Q at ar - M J K G ro up ( M anufacturing L icensee)Phone: ( + 9 7 4 ) 4 4 8 8 8 0 3 5Email: q atar@ x- calibur.co
T h o ro n X -C alibur L t d ( J o in t V e n t ure )( M ember of the T horon G roup)Phone: 0 2 8 3 8 9 3 9 3Email: hk @ x- calibur.co
X -C alibur I n t e rn at io n al V ie t n am Re resentati e ffi ePhone: ( 0 9 0 ) 3 9 7 7 9 7 1Email: vnsaigon@ x- calibur.co
X -C alibur C o n st ruct io n C h e m ist ry ( E A ) L im it e dPhone: ( + 2 5 4 ) 7 3 9 9 1 1 3 3 3Email: sales@ x- calibur.co.k e
T A L X -C alibur ( M an uf act urin g L ice n se e )T AL - A D ivision of N orcros SA ( Pty) L tdPhone: ( 0 1 1 ) 2 0 6 9 7 0 0Email: taltech@ norcrossa.comW ebsite: www.x- calibur.co.za
N C C X -C alibur ( M an uf act urin g L ice n se e )Phone: ( + 2 0 1 ) 2 0 4 4 5 5 9 9 5Email: info@ ncc.com.egW ebsite: www.ncc.com.eg
L e C h im iq ue d e T un ise ( M an uf act urin g L ice n se e )Phone: 7 1 3 8 1 4 5 0 / 7 1 3 8 2 9 2 9Email: chimic@ chimic.com.tn
X -C alibur I n t e rn at io n al V ie t n am Re resentati e ffi ePhone: ( 0 9 0 ) 3 9 7 7 9 7 1Email: vnsaigon@ x- calibur.co
X -C alibur C o n st ruct io n C h e m ist ry ( E A ) L im it e dPhone: ( + 2 5 4 ) 7 3 9 9 1 1 3 3 3Email: sales@ x- calibur.co.k e
T A L X -C alibur ( M an uf act urin g L ice n se e )T AL - A D ivision of N orcros SA ( Pty) L tdPhone: ( 0 1 1 ) 2 0 6 9 7 0 0Email: taltech@ norcrossa.comW ebsite: www.x- calibur.co.za
N C C X -C alibur ( M an uf act urin g L ice n se e )Phone: ( + 2 0 1 ) 2 0 4 4 5 5 9 9 5Email: info@ ncc.com.egW ebsite: www.ncc.com.eg
L e C h im iq ue d e T un ise ( M an uf act urin g L ice n se e )Phone: 7 1 3 8 1 4 5 0 / 7 1 3 8 2 9 2 9Email: chimic@ chimic.com.tn
www.x-calibur.us