Post on 31-Mar-2020
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 1
WOODWORKING PLANS.COM Charging Station
Drill Charging Station
For 2017 I wanted to start the year off with a simple easy to build shop project, so I came up
with this drill charging station. The best news is, the plan is totally FREE!
Just my way of saying thank you to everyone that has supported the site for the last 5 years.
The station is very basic and can be made out of any material that you have laying around the shop. All components are glued and screwed together making construct quick and easy. The most expensive part will be the multi strip outlet for the battery chargers.
The design has room for five drills or nail guns (whatever you want to hang up. You just have to adjust the size of the drill slots to accommodate your equipment. If you require more or less capacity just adjust the plan to suit your needs.
There is a fair amount of weight when the drills, batteries and chargers are on the charging station so there is a French cleat system used to mount it to the wall.
I hope you enjoy this shop project and sincerely hope everyone has a fantastic 2017. Bruce aka (Woodchuck)
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 2
WOODWORKING PLANS.COM Charging Station
Overview (Basic Dimensions)
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 3
WOODWORKING PLANS.COM Charging Station
Exploded View
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 4
WOODWORKING PLANS.COM Charging Station
Ends & Horizontal Dividers
Parts A, B, C
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 5
WOODWORKING PLANS.COM Charging Station
Drill Holder, Spacer Blocks & Center Brace
Parts D, E, F
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 6
WOODWORKING PLANS.COM Charging Station
Mounting System (French Cleat)
Parts G & H
Parts List
“Projects For the Home or Shop”
Free Plan #161 from 3Dwoodworkingplans.com Page 7
WOODWORKING PLANS.COM Charging Station
Material List
Happy Woodworking 2017!
Description T" W" L" MaterialNotes: TBE / MBE = Tenon or Mortise Both Ends,
ALSO: Machining required for workpiecePage
End Panels 3/4 9 1/4 9 1/2 Any Curve (decorative) , & Power Cord Hole 4
Upper Horizontal Divider 3/4 8 1/2 21 1/2 Any 4
Lower Horizontal Divider 3/4 9 1/4 21 1/2 Any 4
Drill Holder 3/4 9 1/4 21 1/2 Any Drill Holding Slots, Curves & Holes 5
Spacer Blocks 3/4 9 1/4 3 1/4 Any Curve 5
Center Brace (Optional) 3/4 3 3 1/4 Any Curve 5
Fixed Cabinet Cleat 3/4 3 3/4 21 1/2 Any 45 Degree Bevel 6
Wall Cleat 3/4 3 3/4 20 1/2 Any 45 Degree Bevel 6
Misc
Woodscrews #8 1 1/2" Pilot Holes and Countersinks on all holes
Glue