Post on 05-Jan-2016
Wireless Mesh-Networks for Interconnection of Remote Sites to Fixed Broadband NetworksFeasibility Study
Kurt Baumannkurt.baumann@switch.ch
QuickTime™ and a decompressor
are needed to see this picture.
TF-Mobility Meeting, Vienna, 18.02.10
2© 2010 SWITCH
Outline
Feasibility Study
- Proposal
- Physical testbed
- Technical aspects
- Results
- Conclusion and further projects
3© 2010 SWITCH
Proposal
The project investigates the feasibility of multi-hop wireless mesh networks for connecting sensor networks or other devices deployed in remote areas, where no fixed network access is available, to a fixed broadband network.
Distances of (several) 10 km need to be traversed.
The project will evaluate Quality-of-Service parameters such as bandwidth, delay, and robustness that can be expected from a solution, which is based on transmission over multiple hops and multiple paths.
Project lead: University of Bern
Industry-Partners: MeteoSwiss / SWITCH / pcEngines
4© 2010 SWITCH
Physical Testbed
CTI-Link, area Payerne:Redundant-Link:
1070m 10300m 11500mLink1: Payerne <==> Corges <==> Sur Le Mont <==> University-Neuchâtel
6760m 1000m 14100mLink2: Payerne <==> Belmont <==> La Gotta <==> University-Neuchâtel
5© 2010 SWITCH
Technical Aspects
Mesh-Node:PCEngines Alix.3DA board
Core of the Mesh nodes contains 500 MHz AMD Geode LX800 CPU, 256 MB RAM, 2 miniPCI slots with IEEE802.11a/b/g/h cards, 1Ethernet IF, 1GB Compact Flash CardAluminium weather sealed (IP-67) outdoor. Software: Linux distribution, an development of University of Bern called ADAM( Administration and Deployment of Ad-hoc Mesh networks)
Two directional panel antennas Frineta, 5.1-5.875 GHz, 23dBi gain,
QuickTime™ and a decompressor
are needed to see this picture.
6© 2010 SWITCH
Technical Aspects
Mast:Telescopic mast sideways slotted aluminum (6)Tubes, max. 9 m with tripod
Requirements to the mast type:- Costs- Transportability- Project duration- High acceptance for the landowner
QuickTime™ and a decompressor
are needed to see this picture.
QuickTime™ and a decompressor
are needed to see this picture.
7© 2010 SWITCH
Technical Aspects
Power-Provisioning Nodes:Powered by the electricity grid or solar pannel
2 nodes: UniNE and MeteoSwiss are connectedvia lightning protector and PoE to the grid.
4 nodes are supplied with electricity by solar - 80W panel. Power equipment in a aluminum box inside a solar-charger, an acid battery (65Ah, 12V - 10days self charging), a lightning protector and a passive PoE
Node (power consumption approx. 3.3 W)on the antenna is connected with a twistedpair cable to the electric supply box.
Network connectivity over Ethernet for on site maintenance.
8© 2010 SWITCH
Technical Aspects Node on the rooftop of MeteoSwiss:This node operates as a sensor node, an IP capable camera.
QuickTime™ and a decompressor
are needed to see this picture.
http://cti-mesh.ch/cgi-bin/smokeping.cgi?target=CTI-Mesh
9© 2010 SWITCH
Technical Aspects
Route availability to node 6 (IP camera) at node 1
10© 2010 SWITCH
Results Free Space Loss Model
Nodexx dm FZr(m) Hmin(m) FSLdB Si(dBm) Pout(mW)
Neuchâtel ⇔Sur le Mont 11500 7.513 9.463 128.47 -77.09 7.277Sur le Mont ⇔Corges 10300 7.110 8.668 127.51 -76.13 7.277Corges ⇔ Payerne 1070 2.291 2.308 107.85 -56.46 7.277Payerne ⇔Belmont 6760 5.760 6.431 123.86 -72.47 7.277Belmont ⇔ La Gotta 1000 2.215 2.223 105.26 -53.87 7.277La Gotta ⇔Neuchâtel 14100 8.319 11.239 130.24 -78.86 7.277
d(m): Distance between two nodesFZr(m): Radius of the first Freznel Zone (60%)Hmin(m): Min of antenna highFSL(dB): Free Space Path LossSi(dBm): Received power level at receiver input
11© 2010 SWITCH
Conclusion / Further Projects
View of SWITCH:
Feasibility study is a success story in extending the network Coverage
Locations: In the project, the interconnection of the WMN and the SWITCH fibre backbonewas build up easily at the University of Neuchâtel. As currently no processto get access to the backbone on an arbitrary location is defined and inplace, the backbone access has to be checked and supported individuallyfor each location; that makes it personnel-intensive and therefore costly.
The feasibility study showed that, currently, the network reliability as wellas the data-throughput of the prototype network do not allow providingWMN specific solutions for wireless broadband connections of customerSites.
Follow-up project will allow investigations on the network reliability andthroughput by reengineering the wireless interface driver, routing software,and self-healing mechanisms. Furthermore, the handling of the antenna equipmentas well as the alignment-process of the antenna has to be simplifiedfor the end-users.
Moreover the attractiveness of this service could be enhanced by increased data rates of newer wirelesscommunication standards e.g. IEEE802.11n.
Wireless Mesh-Networks for Interconnection of Remote Sites to Fixed Broadband NetworksFeasibility Study
Kurt Baumannkurt.baumann@switch.ch
Q & A