Post on 27-May-2020
Revision Date: May 22, 2014
MATERIAL & DISBURSEMENT SERVICES, DISBURSEMENT SERVICES
Web Vendor
Purpose: The web vendor system is an electronic solution for departments to update and add a vendor’s contact information to the Disbursement Services vendor database. This system is used in conjunction with Online Check Request, Web Travel, and InDEPTh.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 2 of 32
Security Access Requirements:
Creator: FACS ID
Approver: Creator Access and Inclusion in FRED Route
Prerequisites: None
Find Help: For Training: financetrainer@unc.edu
For Operational Assistance: Vendor Coordinator, vendor_coordinator@unc.edu or 919-843-5049
For Technical Assistance: 919-962-HELP
mailto:financetrainer@unc.edu�mailto:vendor_coordinator@unc.edu�
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 3 of 32
Table of Contents I. Interactive Process Flow Chart 4
II. Getting Started 5-6
III. Add an Employee to the Vendor Database 6-9
IV. Add a Vendor to the Vendor Database 10-15
V. Add a Non-Resident Alien to the Vendor Database 16-19
VI. Add an Individual as a Temporary Vendor 19-22
VII. Update a Vendor’s Address 22-25
VIII. Update an Employee’s Banking Information 25-28
IX. Acceptable Supporting Documentation - Not Currently Available
X. Submitting Supporting Documentation 29-31
XI. Document History Inquiry 32
kastrinsTypewritten Text
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 4 of 32
I
The Web Vendor Create system has been designed to be user directed based on a sequential set of conditional questions. Due to the complexity of the system, step-by-step instructions for frequently used scenarios are detailed in this training. Prior to beginning please take a moment to participate in the below interactive flow chart.
I. Interactive Process Flow Chart
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 5 of 32
Prior to starting your first Web Vendor, contact your department’s FRED administrator to ensure that a vendor route has been established in the Flexible Routing of Electronic Documents (FRED) system.
1. Login to Finance Central 2. In the left hand main menu click “Inbox”
3. Once in your inbox, click the start tab located just under the banner.
II. Getting Started
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 6 of 32
4. Select “Web Vendor Request” from the dropdown 5. Click
1. Process the steps listed in Getting Started 2. Question One
a. Select the radio button corresponding to yes b. Click
3. Question Two a. Select the radio button corresponding to PID/TIN b. Click
III. Add an employee to the Vendor Database
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 7 of 32
4. Question Three
a. Enter the employee’s nine digit PID with no spaces b. Click
5. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 8 of 32
6. Complete all required and known fields, click
Adding an address of an individual with a PID does not require the submission of documentation.
7. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 9 of 32
When your status has changed and reflects “submitted for departmental approval” the document has proceeded to the next stop on the FRED route.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 10 of 32
1. Process the steps listed in Getting Started 2. Question One
a. Select the radio button corresponding to yes
b. Click
If you know the company’s TIN number, this is the best search method. Many companies include this information on the invoice.
For this scenario we will first search by vendor name.
3. Question Two a. Select the radio button corresponding to vendor name
b. Click
IV. Add a vendor to the Vendor Database
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 11 of 32
For this scenario we will add a corporate vendor, if you were creating a sole proprietor doing business as (DBA) you would answer the opposite to this question.
4. Question Three a. Select the radio button corresponding to yes
b. Click
5. Enter the business name, click
The system has confirmed that an entry for RMJ Consulting does not exist. We will therefore need to obtain the company’s W9.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 12 of 32
6. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 13 of 32
7. Repeat Step Two 8. Select the radio button corresponding with PID/TIN, Click
9. Enter the vendor’s nine digit TIN with no spaces or dashes, Click
10. Question Four a. Select the radio button corresponding to no
b. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 14 of 32
11. Complete all required(*) and known fields
The University’s preferred payment method is electronic funds transfer (EFT). However, the option is available to pay by check if the vendor will not provide banking information.
12. Click 13. Determine whether the remit to address is the same as the order
from address. Click the appropriate button.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 15 of 32
14. Submit supporting documentation either by uploading or faxing documentation. To add a new vendor to the system with EFT information, provide:
a. Copy of the vendor’s W9 (may be found on the vendor’s public website)
b. Request for ACH Remittance Form
15. Once the documents have been received by the system, will appear. Click
When your status has changed and reflects “submitted for departmental approval” the document has proceeded to the next stop on the FRED route.
http://www.unc.edu/finance/fd/md/vendor_eft_letter.pdf�
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 16 of 32
Used primarily when setting up a student payee for scholarship payments, fellowship payments, stipends, or training grants. Also used to pay non-citizen independent contractors.
1. Complete steps under Getting Started 2. Question One
a. Select the radio button corresponding to no
b. Click
3. Question Two a. Select the radio button corresponding to yes
b. Click
V. Add a Non-Resident Alien to the Vendor Database
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 17 of 32
4. Question Three a. Enter the payee’s first and last name b. Click
5. The notification confirms that the vendor is not already setup in the
Vendor Database. Click to search the Campus Directory.
6. The notification confirms that the vendor is not listed in the Campus Directory (for a student this should not be the case). Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 18 of 32
7. Complete all required (*) and known fields, Click
8. Submit either by upload or fax, supporting documentation. For this scenario: a copy of the payee’s VISA or other identifying papers.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 19 of 32
9. After the document has been received by the system, will appear. Click
When your status has changed and reflects “submitted for departmental approval” the document has proceeded to the next stop on the FRED route.
This workflow is used most often when doing one time refunds (i.e. seminar refunds).
1. Complete steps from Getting Started 2. Question One:
a. Select the radio button corresponding to no
b. Click
VI. Add an individual as a Temporary Vendor
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 20 of 32
3. Question Two: a. Select the radio button corresponding to no
b. Click
4. Question Three: a. Select the radio button corresponding to I agree
b. Click
5. Complete all required (*) and known fields
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 21 of 32
6. Click 7. Complete steps in Submitting Supporting Documentation
1. Complete steps from Getting Started 2. Question One:
a. Select the radio button corresponding to yes
b. Click
VII. Update a vendor’s address
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 22 of 32
For this scenario we will first search by vendor name.
3. Question Two: a. Select the radio button corresponding to vendor name
b. Click
For this scenario, we will update an address for a corporate vendor.
4. Question Three: a. Select the radio button corresponding to yes
b. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 23 of 32
5. Enter the business name, Click
6. Click the correct vendor from the results list
7. Scroll down the webpage to the address you wish to update, Click the on the corresponding address line.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 24 of 32
8. Make adjustments in the editable fields, Click
9. Upload or fax a copy of the invoice or other documentation that reflects the need for information correction.
10. When the system receives the supporting documentation, will appear on the page. Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 25 of 32
When your status has changed and reflects “submitted for departmental approval” the document has proceeded to the next stop on the FRED route.
Updates to payroll’s record of direct deposit does flow to the vendor database on a weekly basis. Do not complete this step unless the employee wishes to have Disbursement Service payments go to a different account than his/her payroll check.
1. Complete the steps in Getting Started 2. Question One:
a. Select the radio button corresponding to yes
b. Click
3. Question Two: a. Select the radio button corresponding to PID/TIN
VIII. Update an Employee’s banking information
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 26 of 32
b. Click
4. Enter the employee’s nine digit PID with no spaces or dashes, Click
5. Click the next to the personal address line of the individual.
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 27 of 32
6. If you are only updating banking information, Click
7. Complete all fields, Click
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 28 of 32
8. Upload or fax the Electronic Payment Authorization – for Individuals as supporting documentation.
9. When the document has been received by the system, will appear. Click
When your status has changed and reflects “submitted for departmental approval” the document has proceeded to the next stop on the FRED route.
http://www.unc.edu/finance/busman/apy/apyapp1.pdf�
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 29 of 32
Submission can either be direct upload from your personal computer or faxed.
1. Click the dropdown box and select the appropriate type, either “W9” or “Other Documentation.
To upload from your personal computer:
2. Click 3. Navigate to your file and click open.
4.
X. Submitting Supporting Documentation
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 30 of 32
5. Click
A new upload window will open, when the new window displays text of “200K OK” the document has been received by the system.
To fax in supporting documentation:
2. Click
3. Print the barcode sheet
200K
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 31 of 32
4. Fax the barcode and supporting documentation to the number listed on the barcode sheet.
The barcode sheet must be the first page faxed, do not use any other cover sheets
Material & Disbursement Services Training for Web Vendor Create
Revision Date: May 22, 2014 Return to Table of Contents Page 32 of 32
To access the history log for any given Vendor Create, open the Vendor Create document and click the “History” tab in the header.
Work in Progress Document is still being prepared by creator
Address Successfully Saved The change you made was saved
Submitted for Departmental Approval Creator has finished creating the
document and has submitted to the next approver
In Departmental Approval Waiting for next approver on FRED route
In Vendor Coordinator Approval Disbursement Services has received your request and will review
XI. Document History Inquiry