Standard type Push-pull tester　MP seriesW scale of Kg unit and N unitMain part is a product made from aluminum die-casting.Handy style measuring instrument.

Analog Pushed Pulled Unit

kgf/N

FeatureFor load tests of electronic parts, car parts, polymers, plastics, Electric cords, rubber, etc.This load tester provides you with quick and accurate data for more efficient quality control and assembly.

*one years warranty for only MP-series

*The example of test use Operation power test of a switch Strength test of solder Opening and closing power test of a door Destructive test op plastic etc

Attonic Corporation600-5 Higashi-Takada-cho Toyohashi-cityAichi-pref., 441-8115 Japan TEL:+81-532-41-5357 FAX:+81-532-41-4826http://www.attonic.co.jp/E-mail:info@attonic.co.jp

Model

MP-1

MP-2

MP-3

MP-5

MP-10

MP-20

MP-30

MP-50

1Kg/10N

2Kg/20N

3Kg/30N

5Kg/50N

10Kg/100N

20Kg/200N

30Kg/300N

50Kg/500N

5g/0.05N

10g/0.1N

10g/0.1N

20g/0.2N

50g/0.5N

100g/1N

±0.2% offull-scale

10mm About 750g

100g/1N

200g/2N

Greatesmeasured value

Minimumscale value Accuracy Stroke Weight Note

S-4 S-5

S-6

S-7

S-1 S-2 S-3

Standard attachments