Post on 22-Jul-2020
www.cntrline.comcentered on solutions 1
No. VeriFast LVDT Weld Body Style
Insu
lated
Bod
y Series Stroke(mm)
Cable Exit Position Port Thread
Type of Application
Weld
Pin
Sty
le
Weld Body Foot Print / Other Details
Top
Left
Top
Righ
t
Top
Midd
le
Pre-De
fined2 3 4 22 50
1/8" B
SPP
1/8" N
PT
Nut Stud
1
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil
X ✓✓✓ ✓ X ✓ ✓ X X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
1.00"
(25.40
mm)
2.38" (60.45 mm)
3.00" (76.20 mm)
1.50"
(38.10
mm)
2
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil
✓✓✓✓ ✓ X X X ✓ X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
3
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil
X ✓✓✓ ✓ X X X ✓ X ✓ ✓ ✓ ✓Pi
n Lo
ckD
G S
tyle
Co
nnec
ting
Rod
Ass
embl
yConnecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock PinLV
DT
Weld
Pin
2.75" (69.85 mm) (for Series 2)2.94" (74.68 mm) (for Series 3)3.06" (77.72 mm) (for Series 4)
1.74"
(44.2
0 mm)
45°
2.00"(50.80 mm)
2.25"(57.15 mm)
1.00" (25.40 mm)
1.00"
(25.4
0 mm)
1.00"(25.40 mm)
4
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil
✓✓✓✓ ✓ X X X ✓ X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
5
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil✓✓✓✓ ✓ X ✓ ✓ X X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
4.75" (120.65 mm)
4.00" (101.60 mm)2.38" (60.33 mm)
0.31" (7.94 mm)
1.50" (38.10 mm)
1.50"
(38.10
mm)
1.00"
(25.40
mm)
0.75"
(19.05
mm)
0.25"
(6.35
mm)
6
Barbed fittings provided for 1/4" tube.
Body StyleSXAR
3.88"(98.43 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Body StyleSXHR, SXJR
3.88" (98.43 mm)4.63"
(117.48 mm)5.38"
(136.53 mm)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49"(139.57 mm)
Electrode Taper = 5 RW
Body StyleSXTR & SXQR Combined
Barbed fittings providedfor 1/4" tube.
Backing electrode forSXQR body only.
3.88" (98.43 mm)
0.37"(9.40 mm)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121Body Style
SXHR & SXJR Combined
3.88" (98.43 mm)
• Through hole (SXHR Body)• Threaded 1/2-13 UNC Helicoil (SXJR Body)
Barbed fittings providedfor 1/4" tube.
4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74"(120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
Barbed fittings providedfor 1/4" tube.
Body StyleSXTR
Body StyleSXQR
Body StyleSXKR
0.37"(9.40 mm)
SXCR SXGR
SXCR SXGR
BackingElectrode
BackingElectrode
Barbed fittingprovided for1/4" tube.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
3.88"(98.43 mm)
SXJRSXHR
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
TOLERANCES NOT OTHERWISE SPECIFIED
ANGLES
DESIGN STATUS
DETAILER:
SCALE:
DATE:
REVISION:
FILE:
(WINDSOR) LIMITED
STANDARD
"CENTERLINE STANDARD DRAWING NOTES" 415-WI-07.05.05 APPLY TO ALL DRAWINGS
X.XX .05 .XXX .002 .XXXX .0005
DESIGNER:
DWG ID
CenterLine has proprietary rights to the information contained on this drawing. The information remains the property of CenterLine and may be recalled at any time without notice. This drawing is issued in strict confidence and may not be
used contrary to the interests of CenterLine. This drawing cannot be reproduced without written permission from CenterLine. Copyright 2009 CenterLine (Windsor) Ltd.
PART NUMBER
MATERIAL SIZE
.X .020 FRACTION .030
METRICX .50
X.X .25
IMPERIAL
.XX .010
ANGULAR
SHEET SIZE
MATERIAL TYPE
DESCRIPTION
QC INSPECT (CLOCK NUMBER)
OTHER
Work In Process-
Simon.Britton 7/21/2015
A
0000864287.iam
Standard.idw
_
0000864287
_
_
D1 : 1
NONE BLACK OXIDE
CUSTOMER SPECIFIC
SAFETY YELLOW
SAFETY ORANGE
Part No. *_*
Project No. Leg No.
X.XXX .0121
Barbed fittings providedfor 1/4" tube.
Through hole(Ø17/32" clearance hole for 1/2" screw)
3.88"(98.43 mm)
Barbed fitting provided for 1/4" tube.
3.88"(98.43 mm)
0.37"(9.40 mm)
3.88"(98.43 mm)
3.88"(98.43 mm)
Threaded1/2"-13 UNC
Helicoil ✓✓✓✓ ✓ X ✓ ✓ X X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
7
Body StyleSXVR
3.88"(98.43 mm)
Barbed fitting providedfor 1/4" tube.
X ✓ X X ✓ X X X ✓ X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
1.00"
(25.40
mm)
1.75"
(44.45
mm)
2.75"(69.85 mm)
1.00"(25.40 mm)
1.15"(29.21 mm)
1.00"(25.40 mm)
2.00"(50.80 mm)
2.25"(57.15 mm)
45°
8
Body StyleSXWR
3.88"(98.43 mm)
Barbed fittingprovided for1/4" tube.
0.37"(9.40 mm)
BackingElectrode
✓✓ X X ✓ X X X ✓ X ✓ ✓ ✓ ✓
Pin
Lock
DG
Sty
le
Conn
ectin
g R
od A
ssem
bly
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
TM (Top Middle)
SXZR
TM (Top Middle)
SXKR
TM(Top Middle)
SXTR,SXQRSXVRSXWRSYVR
(Preferred) TR (Top Right)
TL(Top Left)
(Preferred) TR (Top Right)
TL(Top Left)
SXAR (Base Mount)
SXKR (Base Mount)
SXTR (Base Mount)
SXQR (Base Mount)
SXHR (Base Mount)
SXJR (Base Mount)
SXVR (Base Mount)
SXWR (Base Mount)
VeriFast LVDT Quick Reference
(Continued on the next page)...* This option is not recommended.
*
*
*
*
*
*
CenterLine (Windsor) Limited, 415 Morton Drive, Windsor, ON, N9J 3T8,Phone: (519) 734-8464, Toll Free: (800) 820-6977, Email: info@cntrline.com, Website: www.cntrline.com
© 2019 CenterLine Holdings Inc. FDP-VFA-LVD-QR-EL-1.1-05192
XZ L
VDT
Cabl
e /
Lock
Pin
Ass
embl
y
No. VeriFast LVDT Weld Body Style
Insu
lated
Bod
y Series Stroke(mm)
Cable Exit Position Port Thread
Type of Application
Weld
Pin
Sty
le
Weld Body Foot Print / Other Details
Top
Left
Top
Righ
t
Top
Midd
le
Pre-De
fined2 3 4 22 50
1/8" B
SPP
1/8" N
PT
Nut Stud
9
25.40 mm38.10 mm (for Series 2)42.93 mm (for Series 3)45.97 mm (for Series 4)
12.70 mm (for Series 2)17.53 mm (for Series 3)20.57 mm (for Series 4)
44.20
mm
25.40 mm
125.30 mm (for Series 2 and 3)128.52 mm (for Series 4)
25.40 mm
38.10 mm (for Series 2)42.93 mm (for Series 3)45.97 mm (for Series 4)
12.70 mm (for Series 2)17.53 mm (for Series 3)20.57 mm (for Series 4)
199.66 mm (for Series 2)204.49 mm (for Series 3)207.54 mm (for Series 4)
44.20
mm
25.40 mm
199.66 mm (for Series 2)204.49 mm (for Series 3)207.54 mm (for Series 4)
Air Port 10-32 UNF(Barbed fitting provided)
X ✓✓✓ X ✓ X X ✓ X ✓ ✓ ✓ ✓
25.40 mm38.10 mm (for Series 2)42.93 mm (for Series 3)45.97 mm (for Series 4)
12.70 mm (for Series 2)17.53 mm (for Series 3)20.57 mm (for Series 4)
44.20
mm
25.40 mm
125.30 mm (for Series 2 and 3)128.52 mm (for Series 4)
25.40 mm
38.10 mm (for Series 2)42.93 mm (for Series 3)45.97 mm (for Series 4)
12.70 mm (for Series 2)17.53 mm (for Series 3)20.57 mm (for Series 4)
199.66 mm (for Series 2)204.49 mm (for Series 3)207.54 mm (for Series 4)
44.20
mm
25.40 mm
199.66 mm (for Series 2)204.49 mm (for Series 3)207.54 mm (for Series 4)
Air Port 10-32 UNF(Barbed fitting provided)
10 4.63"(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74" (120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
SXCR SXGR
Barbed fittings providedfor 1/4" tube.
X X ✓ X ✓ X X X X ✓ X ✓ ✓ ✓
Pin
Lock
DJ
Styl
e Co
nnec
ting
Rod
Ass
embl
y
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
1.38" (35.05 mm)
1.80" (20.24 mm)
1.38" (35.05 mm)
1.80" (20.24 mm)
11 4.63"
(117.48 mm)
5.38" (136.53 mm)(Series 3 only)
ElectrodeThread = 1-12
4.63"(117.48 mm)
4.74" (120.52 mm)
5.49" (139.57 mm)(Series 3 only)
Electrode Taper = 5 RW
Barbed fittings providedfor 1/4" tube.
SXCR SXGR
Barbed fittings providedfor 1/4" tube.
X X ✓ X ✓ X X X X ✓ X ✓ ✓ ✓
Pin
Lock
DJ
Styl
e Co
nnec
ting
Rod
Ass
embl
y
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
LVDT
W
eld P
in
1.38" (35.05 mm)
1.80" (20.24 mm)
1.38" (35.05 mm)
1.80" (20.24 mm)
12 X ✓✓✓ ✓ ✓ X X X ✓ X ✓ ✓ ✓ 31.75 mm
140 mm105 mm (for Series 2)108 mm (for Series 3)111 mm (for Series 4)
100 mm111 mm (for Series 2)115 mm (for Series 3)118 mm (for Series 4)
31.75 mm
140 mm137 mm (for Series 2)138 mm (for Series 3)143 mm (for Series 4)
31.75 mm
22 mm Pin Stroke
22 mm Pin Stroke
50 mm Pin Stroke
13
Body StyleSYVR
6.77"(172.06 mm)
1.75" (44.45 mm) (for Series 2)2.06" (52.32 mm) (for Series 3 and 4)
1.5" (38.10 mm)
3.97" (100.84 mm) (for Series 2)4.28" (108.71 mm) (for Series 3 and 4)
0.50" (12.70 mm) (for Series 2)0.81" (20.57 mm) (for Series 3 and 4)
1.74"
(44.2
0 mm)
0.37"
(9.40
mm)
1.00"
(25.4
0 mm)
X ✓✓✓ X ✓ X X ✓ X ✓ ✓ ✓ ✓
Body StyleSYVR
6.77"(172.06 mm)
1.75" (44.45 mm) (for Series 2)2.06" (52.32 mm) (for Series 3 and 4)
1.5" (38.10 mm)
3.97" (100.84 mm) (for Series 2)4.28" (108.71 mm) (for Series 3 and 4)
0.50" (12.70 mm) (for Series 2)0.81" (20.57 mm) (for Series 3 and 4)
1.74"
(44.2
0 mm)
0.37"
(9.40
mm)
1.00"
(25.4
0 mm)
TM (Top Middle)
SXZR
TM (Top Middle)
SXKR
TM(Top Middle)
SXTR,SXQRSXVRSXWRSYVR
(Preferred) TR (Top Right)
TL(Top Left)
(Preferred) TR (Top Right)
TL(Top Left)
SXZR (Base Mount)
(Rec
omm
ende
d)
LVDT
W
eld P
in
SXCR (Tapered)
SXGR (Threaded)
ClampMount
Tapp
ed
Weld
Pin
SYVR (Base Mount)
(Rec
omm
ende
d)
...(Continued from the previous page)
Pin
Lock
Connecting Rod
AssemblySpanner Tool
Kit for LVDT Weld Pin(Supplied with all weld bodies)
Lock Pin
HG
Sty
le
Conn
ectin
g R
od A
ssem
bly
LVDT
Weld
Pin
* This option is not recommended.
*
*