Post on 28-Oct-2015
description
A four-bolt pipe connector typically weighing75% less than a comparable standard ANSIor API flange
TechlokClamp Connector
Vect
or In
tern
atio
nal
Tech
lok
Clam
p C
onne
ctor
A radially-bolted mechanical pipe connectionwhich allows quick make-up and break-out andis ideal where space, weight and joint integrityare critical requirements.
Techlok Clamp Connectors are the most effective and economical pipe connection
system available today. Typically several Techlok joints can be installed in the time it
takes to assemble a single standard ANSI or API flange.
Conventional ANSI or API flanges with their eight to 24 bolts require accurate
alignment to ensure a seal, whereas Techlok Clamp Connectors have only four bolts,
no alignment problems and require less bolt loads.
As is well known, external bending forces are an inevitable part of any piping
system, resulting in high stresses being placed on pipe joints. Independent strain gauge
and destructive tests have shown the Techlok connector can withstand considerable
bending moments/forces and axial loading under pressure without leaking or the bolts
becoming loose, greatly reducing maintenance costs at the same time as being highly
beneficial to the environment.
High pressure systems are not a problem, with Techlok connectors working in
applications where pressures of 30,000psi and above are found; and when it comes to
offshore applications where topside loading is critical, Techlok’s low weight is a real
advantage - a factor applicable in any industry where weight and overall installation cost
is a consideration.
Corrosive applications
In more corrosive applications where the specifications demand the use of exotic
materials, the sheer size difference between conventional flanges and Techlok Clamp
Connectors (typically 75%) ensures operators and contractors a real competitive
advantage when determining capex/opex budgets.
But it’s not just size and weight that makes Techlok the natural choice.
Unlike conventional ANSI flanges, Techlok Clamp Connectors are bolted radially to
the pipe, not along its axis. This means that the clamp can be orientated in any position
around the pipe, and together with their greatly reduced size, this eliminates clearance
problems and enables critical components like valve hand wheels to be aligned to their
optimum positions before fully tightening the clamp bolts.
TechlokClamp Connector
2
Saving up to 75% weight/space
Hibernia topside platformAtlantic Canada
Size 4” 2500 class ANSI flange and 4” Techlok connector
3
Some of the Benefits
As well as high performance, leak-free, competitive price and greater efficiency
Techlok connectors have many other advantages over conventional flanges:
• Up to 75% lighter and significantly smaller than a comparable ANSI or API flange
• Close piping and hook-up arrangements with typically 25% smaller clamp diameter
• Typically 40% shorter connection length
• Easier fabrication and installation with no bolt holes to align
• On sizes up to and including 36”, only 4 bolts to tighten rather than up to 24 on a
conventional flange
• The clamp can be rotated round the hub for easy bolt orientation and tightening
• Ancillary components such as valves and piping layouts can be installed without
worrying about bolt hole alignment
• Quicker and easier make-up and breakout minimises maintenance downtime
• Lower bolt torque: typically 50% less than that for a ring joint flange
• Sealing integrity is unaffected by over-tensioning bolts
• Short make and break times - several Techlok connectors can usually be assembled
or disassembled in the time it takes for a single ANSI or API flange connection
• It is not usually necessary to re-tighten bolts once in service
• In most cases only one clamp size is required for each nominal pipe size
• Unlike spiral-wound gaskets, reusable sealrings give greater flexibility for
hydro-testing and commissioning prior to service
• Reduced inventory
• Readily available machining details for interface with associated equipment such as
valves, pumps and metering equipment
• Available in all materials to suit the piping specification
Fully Assembled
Pressure Energised Seal
Prior to Assembly
Self Energised Seal
The Techlok advantage
The heart of Techlok’s success is the energised seal. Techlok clamp connectors do not
rely on the conventional flange’s gaskets and correctly tensioned bolting to maintain the
integrity of the seal. The four basic elements of the Techlok clamp connector are hubs,
sealring, clamps and bolting. When bolting the assembly, the hubs are drawn together by
the twin wedge action of the two clamp segments compressing on the seal ring to make
the first-stage self-energising seal.
The applied bolting loads are transmitted to the clamps through almost 360º contact
with the hubs. And as the bolts are transversely mounted they are almost completely
isolated from the operating loads, resulting in a strong, reliable yet compact connection.
In service the sealring becomes even more effective as internal pressure reinforces the
metal-to-metal seal to the extent that its strength can normally exceed the burst pressure of
the connected pipe.
Techlok Components
Hubs
A critical feature of Techlok hubs is their conical seat which creates the
interference with the sealring lips to make the seal. Hubs are
manufactured from the same generic material as the piping
system on which they are to be utilised. They are then either
welded to the pipe or machined integrally onto associated
equipment such as valves.
Butt weld hubs are supplied with standard ANSI B16.25
weld profiles. Blind hubs are also
available for blanking off a pipe
section or for pressure
vessel closures.
Clamps
The two Techlok clamp segments make
virtually 360º contact round the hubs. The seal is
made when the bolts are tightened, drawing the
two clamp halves together and clamping the hubs
against the sealring. The clamp bolt holes have
spherical seats to accept the spherically faced nuts
to ensure a perfect fit.
Bolting
Techlok clamp connectors come complete with
standard size nuts and bolts in a variety of coatings
to suit every type of piping application. Each
connector requires only four bolts (which
encompasses a 100% safety / redundancy factor)
and the nuts are spherically-faced to eliminate
bending stresses in the bolts during assembly.
Sealring
The key to the Techlok system is its
sealring. Techlok’s sealring has a central rib
section and two seal lips tapered to match the
conical seat profile of the hubs. It is these lips
which make the pressure-energised seal.
Deformation remains essentially elastic throughout, making the
sealring reusable.
The rib provides a positive stop during make-up, preventing the lips
from being crushed by over tightening and also transferring compressive
and bending loads from one hub to the other.
Sealrings are manufactured from high strength steel compatible with the hub
materials. Typically, precipitation-hardening stainless steels such as grades 630 or 660,
or Alloy 718 are specified for corrosion resistant applications, while low alloy steels are
used for carbon steel pipes. Coating the sealring with a lubricant such as PTFE prevents
the surfaces galling during make-up and enhances reusability.
4
Techlok's sealring has many advantages
over conventional gaskets. For example:
• Assured joint integrity first time – every time
• The gasket forces and seal diameter are
minimal, meaning that the load capacity of the
components is maximised
• The proven reliability of the pressure-energised
bore seal makes Techlok connectors compact
and up to 75% lighter than comparably rated
flanges
• The lack of a conventional flange gasket gives a
gas-tight metal-to-metal seal
Techlok TechlokTechlok
CompressionTension Bending
As is well known, external bending forces
are an inevitable part of any piping system,
resulting in high stresses being placed on pipe
joints. Independent strain gauge and
destructive tests have shown the Techlok
connector can withstand considerable bending
moments/forces and axial loading under
pressure without leaking or the bolts
becoming loose, greatly reducing maintenance
costs at the same time as being highly
beneficial to the environment.
Quality Assurance
As one of the earliest members of First Point Assessment Ltd (FPAL) Vector’s
quality and delivery performance is consistently monitored by this independent
authority that acts on behalf of the major operators and their contractors in the
North Sea.
As well as meeting the current industry Standard for Interchangeability Techlok
connectors can also be supplied to meet other design codes and regulations
including:
• ASME B31.3/ASME VIII Div1 and Div2
• API6A/ISO 10423
• PD 5500
• UK Offshore Regulations
• Customer’s special requirements
• Country Codes
• NORSOK
• PED (Pressure Equipment Directive)
Independent quality audit assessments have been
carried out by the following operators and
contractors on Vector’s design and manufacturing
facilities;
• ABB Offshore Systems
• Saudi Aramco
• Amec
• NPCC
• AECL (Nuclear)
• BP
• ExxonMobil (The Netherlands & North Sea)
• Kvaerner Engineering
• Maersk Oil & Gas
• ConocoPhillips
• Shell Exploration & Production
• GE Canada (Nuclear)
• Dominion Bridge (Nuclear)
• Statoil
• J Ray McDermott
• Nemo Engineering AS
5
Type Approval Testing
The Techlok range of connectors has been subjected to
extensive strain gauge and destructive testing under independent
conditions both in-house and at recognised test centres, and,
after combined pressure and external load type testing, carries
Type Approval by Bureau Veritas.
API Fire Testing
It is important to analyse product performance correctly when specifying pipe
connectors. Extensive testing has shown the Techlok range of clamp connectors will
suit most applications.
Successful strain gauge testing under full load conditions, fire testing to API 6FB
parts 1 and 2, independent testing and witnessing resulting in Bureau Veritas Type
Approval, and extensive Finite Element Analysis during the fire test programme, make
Techlok today the most comprehensively tested clamp connector available
Weld-O-Hubs
Weld-O-Hubs
Techlok Weld-O-Hubs enable pipework branch connections to be made with a
single weld, and provide full reinforcement for the pipe run integral with the
Techlok hub.
Weld-O-Hubs are available in all materials to suit piping requirements, in the
standard size range 1" to 6".
D
40°
A
A
PIPE RUN OR MANIFOLD
SECTION A-A
PIPING)
E MAX(TO SUIT
A
B
40°
C
NominalPipe Size
Size Designation
Clamp Size
Ring Size
Hub O/D ‘A’
Back Face O/D ‘B’
Lip O/D ‘C’
Length O/D ‘D’
Sealring Bore
‘E’
ins. ins. ins. ins. ins. ins. ins. ins. ins.
1/2 1in/4 1 4 50.8 38.2 7.95 75 12.6
1/2 1in/5 1 5 50.8 38.2 7.95 75 15.8
3/4 1in/5 1 5 50.8 38.2 7.95 75 15.8
3/4 1in/7 1 7 50.8 38.2 7.95 75 22.9
1 1in/5 1 5 50.8 38.2 7.95 75 15.8
1 1in/7 1 7 50.8 38.2 7.95 75 22.9
1 1in/11 1 11 50.8 38.2 7.95 75 28.4
1–1/2 1–1/2in/11 1–1/2 11 79.4 60.5 12.70 110 28.4
1–1/2 1–1/2in/14 1–1/2 14 79.4 60.5 11.10 110 40.7
2 2in/11 2 11 92.1 73.2 12.70 125 28.4
2 2in/14 2 14 92.1 73.2 11.10 125 40.7
2 2in/20 2 20 92.1 73.2 11.10 125 52.2
3 3in/20 3 20 127.0 101.7 12.70 150 52.2
3 3in/23 3 23 127.0 101.7 12.70 150 60.1
3 3in/25 3 25 127.0 101.7 12.70 150 67.6
3 3in/27 3 27 127.0 101.7 12.70 150 77.5
4 4in/25 4 25 152.4 127.2 12.70 175 67.6
4 4in/31 4 31 152.4 127.2 12.70 175 82.3
4 4in/34 4 34 152.4 127.2 12.70 175 93.4
4 4in/40 4 40 152.4 127.2 12.70 175 102.9
6 6in/40R* 6 40 235.0 197.1 23.79 220 102.9
6 6in/46R* 6 46 235.0 197.1 23.79 220 120.2
6 6in/52 6 52 235.0 197.1 20.62 220 134.5
6 6in/62 6 62 235.0 197.1 19.05 220 153.5
8 8in/52R* 8 52 292.1 254.2 23.79 250 134.5
8 8in/62 8 62 292.1 254.2 19.05 250 153.5
8 8in/72 8 72 292.1 254.2 19.05 250 183.5
8 8in/76 8 76 292.1 254.2 19.05 250 196.2
8 8in/82 8 82 292.1 254.2 19.05 250 208.9
• Pipe connections can be made with just a single weld
• Provides full reinforcement with pipe runs integral with the hub
• Available in all materials to suit piping requirements
• Standard sizes available from 1" to 6"
• Also available Weld-O-Flange for the SPO Compact Flange
6
Techlok Clampsets
Clamp Size Clamp ID Bolt
Centres Clamp OD Overall Length
Clamp Width
Lug Sepa-ration
Clamp Clearance Bolt Dia. Bolt
LengthBolt Lug Width Bolt Pitch Assembly
Clearance Clamp Wt.
A B C D E F G H I J K L
ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm Lbs Kg
Standard Series
1in 1.69 43 3.25 83 2.81 71 4.25 108 1.38 35 2.19 56 2.63 67 0.50 13 3.50 89 2.25 57 1.25 32 1.9 48 4.2 1.9
1.5in 2.69 68 5.00 127 4.50 114 6.50 165 2.00 51 3.25 83 4.00 102 0.63 16 5.00 127 3.13 80 1.63 41 3.0 76 9.9 4.5
2in 3.20 81 5.75 146 5.50 140 7.50 191 2.00 51 3.52 89 4.50 114 0.75 19 5.25 133 3.38 86 1.81 46 3.6 91 13.2 6.0
3in 4.38 111 7.50 191 6.88 175 9.25 235 2.38 61 4.60 117 5.25 133 0.75 19 6.50 165 3.38 86 1.81 46 4.6 117 23.6 10.7
4in 5.38 137 8.50 216 8.25 210 10.50 267 2.38 61 5.40 137 6.00 152 0.88 22 7.50 191 4.00 102 2.06 52 5.4 137 28.7 13.0
5in 6.88 175 10.25 260 9.88 251 12.38 315 3.13 80 6.13 156 7.25 184 1.00 25 8.25 210 4.50 114 2.31 59 6.9 175 41.0 18.6
6in 8.38 213 12.63 321 12.00 305 15.25 387 3.75 95 6.88 175 8.75 222 1.13 29 10.63 270 5.25 133 2.44 62 8.0 203 70.3 31.9
8in 10.63 270 15.25 387 14.50 368 18.50 470 3.75 95 7.88 200 9.88 251 1.25 32 12.00 305 5.75 146 2.88 73 9.4 239 110.0 49.9
Light Duty Series
L14in 16.38 416 22.25 565 21.50 546 26.00 660 5.00 127 10.88 276 14.75 375 1.63 41 17.00 432 7.38 188 3.63 92 13.3 338 275.6 125.0
L16in 18.63 473 24.00 610 23.50 597 27.75 705 5.00 127 13.00 330 16.25 413 1.75 44 19.50 495 7.63 194 3.88 99 14.5 368 308.6 140.0
L18in 20.88 530 25.75 654 26.00 660 29.50 749 5.00 127 14.38 365 17.50 445 1.88 48 21.50 546 8.00 203 4.13 105 15.9 404 352.7 160.0
L20in 23.63 600 28.31 719 29.38 746 32.25 819 5.00 127 17.13 435 19.50 495 2.00 51 24.75 629 8.50 216 4.38 111 17.7 450 418.9 190.0
L24in 28.31 719 34.25 870 34.75 883 38.88 988 6.25 159 18.38 467 22.50 572 2.25 57 27.00 686 9.50 241 5.00 127 21.4 544 661.4 300.0
Heavy Duty Series
H2in 4.13 105 7.25 184 6.88 175 9.00 229 2.88 73 4.88 124 5.63 143 0.88 22 7.50 191 3.75 95 2.00 51 4.6 117 24.3 11.0
H3in 4.88 124 8.00 203 7.75 197 10.00 254 3.00 76 5.43 138 6.13 156 0.88 22 7.50 191 4.00 102 2.06 52 5.1 130 33.1 15.0
H4in 6.13 156 9.56 243 9.00 229 11.75 298 3.00 76 5.75 146 7.00 178 1.00 25 8.25 210 4.38 111 2.31 59 5.9 150 39.9 18.1
H8in 10.13 257 16.00 406 14.75 375 18.63 473 4.50 114 7.50 191 10.75 273 1.38 35 12.00 305 5.88 149 3.13 80 9.8 249 138 62.6
H10in 12.25 311 18.25 464 17.63 448 22.50 572 5.50 140 10.50 267 12.75 324 1.63 41 15.63 397 7.25 184 3.63 92 11.4 290 243 110.2
H12in 14.63 372 21.00 533 20.38 518 25.00 635 5.75 146 11.25 286 14.25 362 1.75 44 17.00 432 7.50 191 3.75 95 13.0 330 320 145.2
H14in 17.13 435 24.75 629 23.00 584 29.25 743 6.13 156 11.25 286 16.25 413 1.88 48 17.25 438 8.25 210 4.25 108 14.6 371 430 195.1
H16in 19.69 500 29.25 743 27.19 691 34.25 870 7.63 194 13.50 343 19.13 486 2.25 57 22.00 559 9.63 245 5.00 127 16.9 429 683 309.8
H18in 20.69 526 29.25 743 27.69 703 34.25 870 7.63 194 14.00 356 19.63 499 2.25 57 22.00 559 9.63 245 5.00 127 17.3 439 650 294.8
H20in 23.69 602 32.00 813 30.38 772 37.63 956 7.50 191 18.00 457 21.50 546 2.25 57 26.00 660 10.00 254 5.00 127 18.8 478 860 390.1
H22in 24.69 627 32.00 813 32.25 819 37.63 956 7.50 191 18.00 457 21.50 546 2.25 57 26.00 660 10.00 254 5.00 127 19.9 506 816 370.1
H24in 28.19 716 36.00 914 36.13 918 40.50 1029 7.00 178 19.40 493 23.75 603 2.25 57 27.00 686 10.50 267 5.00 127 22.1 561 1047 474.9
H26in 29.94 761 38.75 984 37.85 961 46.50 1181 8.00 203 19.60 498 27.00 686 2.50 64 28.00 711 10.50 267 5.50 140 23.1 587 1155 523.9
Techlok Clampsets
7
8
Heavy Duty Butt Weld and Blind Hubs Heavy Duty Butt Weld and Blind Hubs
N.P.S (DN)
Pipe Sched-
ule
Techlok Designa-tion Hub / S.Ring
Pipe Hub Hub Hub Lip Blind Hub BW Hub Blind Hub
O.Dia. I.Dia. O.Dia. Length Backface Dia Thickness Thickness Wt. Wt.
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’
ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm Lbs. Kg Lbs. Kg
2” (DN 50) Std 40 40S H2in20 2.07 52.5 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.2 2.8 7 3.2
2.38 60.3 XS 80 80S H2in20 1.94 49.3 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.5 2.9 7 3.2
160 H2in16 1.69 42.9 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.1 3.2 7 3.2
XXS H2in14 1.50 38.2 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.5 3.4 7 3.2
3” (DN 75) Std 40 40S H3in27 3.07 77.9 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 7.3 3.3 11 5
3.50 88.9 XS 80 80S H3in27 2.90 73.7 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 8 3.6 11 5
160 H3in25 2.62 66.6 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 9.2 4.2 11 5
XXS H3in23 2.30 58.4 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 10.3 4.7 11 5
4” (DN 100) Std 40 40S H4in40 4.03 102.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 11.9 5.4 21.9 10
4.50 114.3 XS 80 80S H4in40 3.83 97.2 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 13 5.9 21.9 10
120 H4in34 3.62 92.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 14.3 6.5 21.9 10
160 H4in34 3.44 87.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 15.5 7 21.9 10
XXS H4in31 3.15 80.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 17.2 7.8 21.9 10
8” (DN 200) Std 40 40S H8in82 7.98 202.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 31.6 14.3 73.3 33.2
8.63 219.1 XS 80 80S H8in76 7.63 193.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 38.3 17.4 73.3 33.2
100 H8in76 7.44 189.0 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 40.3 18.3 73.3 33.2
120 H8in72 7.19 182.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 45.4 20.6 73.3 33.2
140 H8in72 7.00 177.8 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 47.2 21.4 73.3 33.2
XXS H8in67 6.88 174.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.1 22.7 73.3 33.2
160 H8in67 6.81 173.1 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.7 23 73.3 33.2
10” (DN 250) Std 40 40S H10in102 10.02 254.5 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 49.9 22.6 119.2 54.1
10.75 273.1 XS 60 80S H10in97 9.75 247.7 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 57.5 26.1 119.2 54.1
80 H10in97 9.56 242.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 60.7 27.6 119.2 54.1
100 H10in94 9.31 236.6 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 67.6 30.7 119.2 54.1
120 H10in92 9.06 230.2 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 71.4 32.4 119.2 54.1
XXS140 H10in87 8.75 222.3 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 80.5 36.5 119.2 54.1
160 H10in84 8.50 215.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 86.2 39.1 119.2 54.1
12” (DN 300) Std 40s H12in120 12.00 304.8 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 77.1 35 184.5 83.7
12.75 323.9 40 H12in120 11.94 303.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 78.8 35.8 184.5 83.7
XS 80S H12in116 11.75 298.5 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 85.4 38.7 184.5 83.7
80 H12in116 11.38 289.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 94.4 42.8 184.5 83.7
100 H12in112 11.06 281.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 104.3 47.3 184.5 83.7
XXS 120 H12in106 10.75 273.1 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 112.9 51.2 184.5 83.7
140 H12in106 10.50 266.7 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 118.3 53.7 184.5 83.7
160 H12in102 10.13 257.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 129.3 58.7 184.5 83.7
14” (DN 350) 40 H14in134 13.12 333.3 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 124.7 56.6 290.8 131.9
14.00 355.6 XS H14in130 13.00 330.2 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 133.2 60.4 290.8 131.9
80 H14in124 12.50 317.5 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 153.3 69.5 291.8 132.3
100 H14in124 12.12 307.9 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 163.8 74.3 291.8 132.3
120 H14in120 11.81 300.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 177.3 80.4 291.8 132.3
140 H14in116 11.50 292.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 187.2 84.9 291.8 132.3
160 H14in112 11.19 284.2 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 197 89.4 289.8 131.5
16” (DN 400) XS 40 H16in152 15.00 381.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 194.8 88.4 431.2 195.6
16.00 406.4 60 H16in152 14.69 373.1 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 206.3 93.6 431.2 195.6
80 H16in144 14.31 363.6 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 229.1 103.9 431.2 195.6
100 H16in140 13.94 354.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 247.5 112.3 431.2 195.6
120 H16in137 13.56 344.5 21.00 533.4 7.88 200.0 19.00 482.6 1.63 41.3 5.00 127.0 260.5 118.2 430.1 195.1
140 H16in134 13.12 333.3 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 279.4 126.8 431.2 195.6
160 H16in130 12.81 325.4 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 293.9 133.3 431.2 195.6
18” (DN 450) 40 H18in170 16.88 428.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 176 79.8 476.1 215.9
18.00 457.2 60 H18in170 16.50 419.1 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 191.7 86.9 476.1 215.9
80 H18in160 16.13 409.6 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 219.8 99.7 476.1 215.9
100 H18in160 15.69 398.5 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 238.1 108 476.1 215.9
120 H18in152 15.25 387.4 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 262.8 119.2 476.1 215.9
140 H18in152 14.88 377.9 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 276.4 125.4 476.1 215.9
160 H18in144 14.44 366.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 299.2 135.7 476.1 215.9
20” (DN 500) 40 H20in192 18.81 477.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 262.7 119.2 681.4 309.1
20.00 508 60 H20in185 18.38 466.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 295.1 133.9 681.4 309.1
80 H20in180 17.94 455.6 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 327.6 148.6 681.4 309.1
100 H20in180 17.44 442.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 351.9 159.6 681.4 309.1
120 H20in170 17.00 431.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 386.5 175.3 681.4 309.1
140 H20in170 16.50 419.1 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 408.7 185.4 681.4 309.1
160 H20in160 16.06 408.0 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 440.3 199.7 681.4 309.1
22” (DN 550) 40 H22in210 20.75 527.1 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 219.8 99.7 732 332
22.00 558.8 60 H22in210 20.25 514.4 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 247 112 732 332
80 H22in200 19.75 501.7 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 295.2 133.9 732 332
100 H22in192 19.25 489.0 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 333.3 151.2 732 332
120 H22in192 18.75 476.3 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 358.9 162.8 732 332
140 H22in185 18.25 463.6 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 391.8 177.7 732 332
160 H22in180 17.75 450.9 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 424.8 192.7 732 332
24” (DN 600) 40 H24in225 22.62 574.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 360.3 163.4 1040.2 471.9
24.00 609.6 60 H24in220 22.06 560.4 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 409.6 185.8 1040.2 471.9
80 H24in220 21.56 547.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 441.6 200.3 1040.2 471.9
100 H24in210 20.94 531.8 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 496.8 225.4 1040.2 471.9
120 H24in210 20.38 517.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 527.4 239.2 1040.2 471.9
140 H24in200 19.88 504.9 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 573 259.9 1040.2 471.9
160 H24in200 19.31 490.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 600.1 272.2 1040.2 471.9
26” (DN 650) Std H26in254 25.25 641.4 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 360.8 163.7 1279.8 580.5
26.00 660.4 XS H26in254 25.00 635.0 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 382.2 173.3 1279.8 580.5
9
Heavy Duty Butt Weld and Blind Hubs cont’d
Heavy Duty Butt Weld and Blind Hubs
N.P.S (DN)
Pipe Sched-
ule
Techlok Designa-tion Hub / S.Ring
Pipe Hub Hub Hub Lip Blind Hub BW Hub Blind Hub
O.Dia. I.Dia. O.Dia. Length Backface Dia Thickness Thickness Wt. Wt.
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’
ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm Lbs. Kg Lbs. Kg
2” (DN 50) Std 40 40S H2in20 2.07 52.5 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.2 2.8 7 3.2
2.38 60.3 XS 80 80S H2in20 1.94 49.3 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.5 2.9 7 3.2
160 H2in16 1.69 42.9 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.1 3.2 7 3.2
XXS H2in14 1.50 38.2 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.5 3.4 7 3.2
3” (DN 75) Std 40 40S H3in27 3.07 77.9 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 7.3 3.3 11 5
3.50 88.9 XS 80 80S H3in27 2.90 73.7 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 8 3.6 11 5
160 H3in25 2.62 66.6 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 9.2 4.2 11 5
XXS H3in23 2.30 58.4 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 10.3 4.7 11 5
4” (DN 100) Std 40 40S H4in40 4.03 102.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 11.9 5.4 21.9 10
4.50 114.3 XS 80 80S H4in40 3.83 97.2 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 13 5.9 21.9 10
120 H4in34 3.62 92.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 14.3 6.5 21.9 10
160 H4in34 3.44 87.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 15.5 7 21.9 10
XXS H4in31 3.15 80.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 17.2 7.8 21.9 10
8” (DN 200) Std 40 40S H8in82 7.98 202.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 31.6 14.3 73.3 33.2
8.63 219.1 XS 80 80S H8in76 7.63 193.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 38.3 17.4 73.3 33.2
100 H8in76 7.44 189.0 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 40.3 18.3 73.3 33.2
120 H8in72 7.19 182.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 45.4 20.6 73.3 33.2
140 H8in72 7.00 177.8 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 47.2 21.4 73.3 33.2
XXS H8in67 6.88 174.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.1 22.7 73.3 33.2
160 H8in67 6.81 173.1 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.7 23 73.3 33.2
10” (DN 250) Std 40 40S H10in102 10.02 254.5 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 49.9 22.6 119.2 54.1
10.75 273.1 XS 60 80S H10in97 9.75 247.7 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 57.5 26.1 119.2 54.1
80 H10in97 9.56 242.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 60.7 27.6 119.2 54.1
100 H10in94 9.31 236.6 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 67.6 30.7 119.2 54.1
120 H10in92 9.06 230.2 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 71.4 32.4 119.2 54.1
XXS140 H10in87 8.75 222.3 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 80.5 36.5 119.2 54.1
160 H10in84 8.50 215.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 86.2 39.1 119.2 54.1
12” (DN 300) Std 40s H12in120 12.00 304.8 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 77.1 35 184.5 83.7
12.75 323.9 40 H12in120 11.94 303.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 78.8 35.8 184.5 83.7
XS 80S H12in116 11.75 298.5 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 85.4 38.7 184.5 83.7
80 H12in116 11.38 289.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 94.4 42.8 184.5 83.7
100 H12in112 11.06 281.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 104.3 47.3 184.5 83.7
XXS 120 H12in106 10.75 273.1 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 112.9 51.2 184.5 83.7
140 H12in106 10.50 266.7 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 118.3 53.7 184.5 83.7
160 H12in102 10.13 257.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 129.3 58.7 184.5 83.7
14” (DN 350) 40 H14in134 13.12 333.3 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 124.7 56.6 290.8 131.9
14.00 355.6 XS H14in130 13.00 330.2 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 133.2 60.4 290.8 131.9
80 H14in124 12.50 317.5 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 153.3 69.5 291.8 132.3
100 H14in124 12.12 307.9 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 163.8 74.3 291.8 132.3
120 H14in120 11.81 300.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 177.3 80.4 291.8 132.3
140 H14in116 11.50 292.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 187.2 84.9 291.8 132.3
160 H14in112 11.19 284.2 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 197 89.4 289.8 131.5
16” (DN 400) XS 40 H16in152 15.00 381.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 194.8 88.4 431.2 195.6
16.00 406.4 60 H16in152 14.69 373.1 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 206.3 93.6 431.2 195.6
80 H16in144 14.31 363.6 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 229.1 103.9 431.2 195.6
100 H16in140 13.94 354.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 247.5 112.3 431.2 195.6
120 H16in137 13.56 344.5 21.00 533.4 7.88 200.0 19.00 482.6 1.63 41.3 5.00 127.0 260.5 118.2 430.1 195.1
140 H16in134 13.12 333.3 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 279.4 126.8 431.2 195.6
160 H16in130 12.81 325.4 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 293.9 133.3 431.2 195.6
18” (DN 450) 40 H18in170 16.88 428.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 176 79.8 476.1 215.9
18.00 457.2 60 H18in170 16.50 419.1 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 191.7 86.9 476.1 215.9
80 H18in160 16.13 409.6 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 219.8 99.7 476.1 215.9
100 H18in160 15.69 398.5 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 238.1 108 476.1 215.9
120 H18in152 15.25 387.4 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 262.8 119.2 476.1 215.9
140 H18in152 14.88 377.9 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 276.4 125.4 476.1 215.9
160 H18in144 14.44 366.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 299.2 135.7 476.1 215.9
20” (DN 500) 40 H20in192 18.81 477.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 262.7 119.2 681.4 309.1
20.00 508 60 H20in185 18.38 466.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 295.1 133.9 681.4 309.1
80 H20in180 17.94 455.6 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 327.6 148.6 681.4 309.1
100 H20in180 17.44 442.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 351.9 159.6 681.4 309.1
120 H20in170 17.00 431.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 386.5 175.3 681.4 309.1
140 H20in170 16.50 419.1 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 408.7 185.4 681.4 309.1
160 H20in160 16.06 408.0 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 440.3 199.7 681.4 309.1
22” (DN 550) 40 H22in210 20.75 527.1 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 219.8 99.7 732 332
22.00 558.8 60 H22in210 20.25 514.4 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 247 112 732 332
80 H22in200 19.75 501.7 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 295.2 133.9 732 332
100 H22in192 19.25 489.0 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 333.3 151.2 732 332
120 H22in192 18.75 476.3 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 358.9 162.8 732 332
140 H22in185 18.25 463.6 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 391.8 177.7 732 332
160 H22in180 17.75 450.9 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 424.8 192.7 732 332
24” (DN 600) 40 H24in225 22.62 574.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 360.3 163.4 1040.2 471.9
24.00 609.6 60 H24in220 22.06 560.4 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 409.6 185.8 1040.2 471.9
80 H24in220 21.56 547.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 441.6 200.3 1040.2 471.9
100 H24in210 20.94 531.8 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 496.8 225.4 1040.2 471.9
120 H24in210 20.38 517.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 527.4 239.2 1040.2 471.9
140 H24in200 19.88 504.9 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 573 259.9 1040.2 471.9
160 H24in200 19.31 490.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 600.1 272.2 1040.2 471.9
26” (DN 650) Std H26in254 25.25 641.4 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 360.8 163.7 1279.8 580.5
26.00 660.4 XS H26in254 25.00 635.0 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 382.2 173.3 1279.8 580.5
Heavy Duty Butt Weld and Blind Hubs
N.P.S (DN)
Pipe Sched-
ule
Techlok Designa-tion Hub / S.Ring
Pipe Hub Hub Hub Lip Blind Hub BW Hub Blind Hub
O.Dia. I.Dia. O.Dia. Length Backface Dia Thickness Thickness Wt. Wt.
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’
ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm Lbs. Kg Lbs. Kg
2” (DN 50) Std 40 40S H2in20 2.07 52.5 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.2 2.8 7 3.2
2.38 60.3 XS 80 80S H2in20 1.94 49.3 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 6.5 2.9 7 3.2
160 H2in16 1.69 42.9 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.1 3.2 7 3.2
XXS H2in14 1.50 38.2 4.75 120.7 3.25 82.6 3.75 95.3 0.63 15.9 1.88 47.6 7.5 3.4 7 3.2
3” (DN 75) Std 40 40S H3in27 3.07 77.9 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 7.3 3.3 11 5
3.50 88.9 XS 80 80S H3in27 2.90 73.7 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 8 3.6 11 5
160 H3in25 2.62 66.6 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 9.2 4.2 11 5
XXS H3in23 2.30 58.4 5.50 139.7 3.50 88.9 4.50 114.3 0.63 15.9 2.13 54.0 10.3 4.7 11 5
4” (DN 100) Std 40 40S H4in40 4.03 102.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 11.9 5.4 21.9 10
4.50 114.3 XS 80 80S H4in40 3.83 97.2 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 13 5.9 21.9 10
120 H4in34 3.62 92.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 14.3 6.5 21.9 10
160 H4in34 3.44 87.3 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 15.5 7 21.9 10
XXS H4in31 3.15 80.1 6.75 171.5 4.00 101.6 5.75 146.1 0.63 15.9 2.75 69.8 17.2 7.8 21.9 10
8” (DN 200) Std 40 40S H8in82 7.98 202.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 31.6 14.3 73.3 33.2
8.63 219.1 XS 80 80S H8in76 7.63 193.7 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 38.3 17.4 73.3 33.2
100 H8in76 7.44 189.0 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 40.3 18.3 73.3 33.2
120 H8in72 7.19 182.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 45.4 20.6 73.3 33.2
140 H8in72 7.00 177.8 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 47.2 21.4 73.3 33.2
XXS H8in67 6.88 174.6 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.1 22.7 73.3 33.2
160 H8in67 6.81 173.1 11.50 292.1 5.00 127.0 9.50 241.3 1.00 25.4 3.19 81.0 50.7 23 73.3 33.2
10” (DN 250) Std 40 40S H10in102 10.02 254.5 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 49.9 22.6 119.2 54.1
10.75 273.1 XS 60 80S H10in97 9.75 247.7 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 57.5 26.1 119.2 54.1
80 H10in97 9.56 242.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 60.7 27.6 119.2 54.1
100 H10in94 9.31 236.6 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 67.6 30.7 119.2 54.1
120 H10in92 9.06 230.2 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 71.4 32.4 119.2 54.1
XXS140 H10in87 8.75 222.3 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 80.5 36.5 119.2 54.1
160 H10in84 8.50 215.9 13.63 346.1 6.00 152.4 11.63 295.3 1.25 31.8 3.50 88.9 86.2 39.1 119.2 54.1
12” (DN 300) Std 40s H12in120 12.00 304.8 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 77.1 35 184.5 83.7
12.75 323.9 40 H12in120 11.94 303.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 78.8 35.8 184.5 83.7
XS 80S H12in116 11.75 298.5 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 85.4 38.7 184.5 83.7
80 H12in116 11.38 289.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 94.4 42.8 184.5 83.7
100 H12in112 11.06 281.0 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 104.3 47.3 184.5 83.7
XXS 120 H12in106 10.75 273.1 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 112.9 51.2 184.5 83.7
140 H12in106 10.50 266.7 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 118.3 53.7 184.5 83.7
160 H12in102 10.13 257.2 16.00 406.4 6.63 168.3 14.00 355.6 1.38 34.9 4.00 101.6 129.3 58.7 184.5 83.7
14” (DN 350) 40 H14in134 13.12 333.3 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 124.7 56.6 290.8 131.9
14.00 355.6 XS H14in130 13.00 330.2 18.50 469.9 7.25 184.2 16.50 419.1 1.19 30.1 4.50 114.3 133.2 60.4 290.8 131.9
80 H14in124 12.50 317.5 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 153.3 69.5 291.8 132.3
100 H14in124 12.12 307.9 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 163.8 74.3 291.8 132.3
120 H14in120 11.81 300.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 177.3 80.4 291.8 132.3
140 H14in116 11.50 292.1 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 187.2 84.9 291.8 132.3
160 H14in112 11.19 284.2 18.50 469.9 7.25 184.2 16.50 419.1 1.25 31.8 4.50 114.3 197 89.4 289.8 131.5
16” (DN 400) XS 40 H16in152 15.00 381.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 194.8 88.4 431.2 195.6
16.00 406.4 60 H16in152 14.69 373.1 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 206.3 93.6 431.2 195.6
80 H16in144 14.31 363.6 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 229.1 103.9 431.2 195.6
100 H16in140 13.94 354.0 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 247.5 112.3 431.2 195.6
120 H16in137 13.56 344.5 21.00 533.4 7.88 200.0 19.00 482.6 1.63 41.3 5.00 127.0 260.5 118.2 430.1 195.1
140 H16in134 13.12 333.3 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 279.4 126.8 431.2 195.6
160 H16in130 12.81 325.4 21.00 533.4 7.88 200.0 19.00 482.6 1.69 42.9 5.00 127.0 293.9 133.3 431.2 195.6
18” (DN 450) 40 H18in170 16.88 428.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 176 79.8 476.1 215.9
18.00 457.2 60 H18in170 16.50 419.1 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 191.7 86.9 476.1 215.9
80 H18in160 16.13 409.6 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 219.8 99.7 476.1 215.9
100 H18in160 15.69 398.5 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 238.1 108 476.1 215.9
120 H18in152 15.25 387.4 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 262.8 119.2 476.1 215.9
140 H18in152 14.88 377.9 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 276.4 125.4 476.1 215.9
160 H18in144 14.44 366.7 22.00 558.8 7.88 200.0 20.00 508.0 1.69 42.9 5.00 127.0 299.2 135.7 476.1 215.9
20” (DN 500) 40 H20in192 18.81 477.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 262.7 119.2 681.4 309.1
20.00 508 60 H20in185 18.38 466.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 295.1 133.9 681.4 309.1
80 H20in180 17.94 455.6 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 327.6 148.6 681.4 309.1
100 H20in180 17.44 442.9 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 351.9 159.6 681.4 309.1
120 H20in170 17.00 431.8 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 386.5 175.3 681.4 309.1
140 H20in170 16.50 419.1 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 408.7 185.4 681.4 309.1
160 H20in160 16.06 408.0 25.00 635.0 8.75 222.3 23.00 584.2 1.63 41.3 5.50 139.7 440.3 199.7 681.4 309.1
22” (DN 550) 40 H22in210 20.75 527.1 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 219.8 99.7 732 332
22.00 558.8 60 H22in210 20.25 514.4 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 247 112 732 332
80 H22in200 19.75 501.7 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 295.2 133.9 732 332
100 H22in192 19.25 489.0 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 333.3 151.2 732 332
120 H22in192 18.75 476.3 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 358.9 162.8 732 332
140 H22in185 18.25 463.6 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 391.8 177.7 732 332
160 H22in180 17.75 450.9 26.00 660.4 8.75 222.3 24.00 609.6 1.25 31.8 5.50 139.7 424.8 192.7 732 332
24” (DN 600) 40 H24in225 22.62 574.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 360.3 163.4 1040.2 471.9
24.00 609.6 60 H24in220 22.06 560.4 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 409.6 185.8 1040.2 471.9
80 H24in220 21.56 547.7 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 441.6 200.3 1040.2 471.9
100 H24in210 20.94 531.8 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 496.8 225.4 1040.2 471.9
120 H24in210 20.38 517.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 527.4 239.2 1040.2 471.9
140 H24in200 19.88 504.9 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 573 259.9 1040.2 471.9
160 H24in200 19.31 490.6 29.50 749.3 9.00 228.6 27.50 698.5 1.25 31.8 6.00 152.4 600.1 272.2 1040.2 471.9
26” (DN 650) Std H26in254 25.25 641.4 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 360.8 163.7 1279.8 580.5
26.00 660.4 XS H26in254 25.00 635.0 31.12 793.8 10.00 254.0 29.25 743.0 1.63 41.3 6.50 165.1 382.2 173.3 1279.8 580.5
Standard Butt Weld and Blind Hubs Standard Butt Weld and Blind Hubs
N.P.S (DN)
Pipe Sched-
ule
Techlok Desig-nation Hub /
S.Ring
Pipe Hub Hub Hub Lip Blind Hub BW Hub Blind Hub
O.Dia. I.Dia. O.Dia. Length Backface Dia Thickness Thickness Wt. Wt.
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’
ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm Lbs. Kg Lbs. Kg
1/2” (DN 15) Std 40 40S 1in5 0.62 15.8 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
0.84 21.3 XS 80 80S 1in5 0.55 13.9 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
160 1in4 0.47 11.8 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
XXS 1in4 0.25 6.4 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
3/4” (DN 20) Std 40 40S 1in7 0.82 20.9 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.5 0.2 0.8 0.4
1.05 26.7 XS 80 80S 1in7 0.74 18.8 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
160 1in5 0.61 15.6 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.7 0.3 0.8 0.4
XXS 1in4 0.43 11.0 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.7 0.3 0.8 0.4
1” (DN 25) Std 40 40S 1in11 1.05 26.6 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.5 0.2 0.8 0.4
1.32 33.4 XS 80 80S 1in11 0.96 24.3 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.5 0.2 0.8 0.4
160 1in7 0.82 20.7 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.6 0.3 0.8 0.4
XXS 1in5 0.60 15.2 2.00 50.8 1.75 44.5 1.50 38.1 0.31 8.0 1.31 33.4 0.7 0.3 0.8 0.4
1.5” (DN 40) Std 40 40S 1.5in14 1.61 40.9 3.13 79.4 2.38 60.3 2.38 60.3 0.44 11.1 1.63 41.3 1.6 0.7 2.4 1.1
1.90 48.3 XS 80 80S 1.5in13 1.50 38.1 3.13 79.4 2.38 60.3 2.38 60.3 0.50 12.7 1.63 41.3 1.9 0.8 2.5 1.1
160 1.5in13 1.34 34.0 3.13 79.4 2.38 60.3 2.38 60.3 0.50 12.7 1.63 41.3 2 0.9 2.5 1.1
XXS 1.5in11 1.10 27.9 3.13 79.4 2.38 60.3 2.38 60.3 0.50 12.7 1.63 41.3 2.4 1.1 2.5 1.1
2” (DN 50) Std 40 40S 2in20 2.07 52.5 3.63 92.1 2.75 69.9 2.88 73.0 0.44 11.1 1.75 44.5 2.2 1 3.7 1.7
2.38 60.3 XS 80 80S 2in20 1.94 49.3 3.63 92.1 2.75 69.9 2.88 73.0 0.44 11.1 1.75 44.5 2.5 1.1 3.7 1.7
160 2in16 1.69 42.9 3.63 92.1 2.75 69.9 2.88 73.0 0.44 11.1 1.75 44.5 3 1.4 3.7 1.7
XXS 2in14 1.50 38.2 3.63 92.1 2.75 69.9 2.88 73.0 0.44 11.1 1.75 44.5 3.4 1.5 3.7 1.7
3” (DN 75) Std 40 40S 3in27 3.07 77.9 5.00 127.0 3.25 82.6 4.00 101.6 0.50 12.7 1.88 47.6 4.7 2.1 7.7 3.5
3.50 88.9 XS 80 80S 3in27 2.90 73.7 5.00 127.0 3.25 82.6 4.00 101.6 0.50 12.7 1.88 47.6 5.2 2.4 7.7 3.5
160 3in25 2.62 66.6 5.00 127.0 3.25 82.6 4.00 101.6 0.50 12.7 1.88 47.6 6.3 2.9 7.7 3.5
XXS 3in23 2.30 58.4 5.00 127.0 3.25 82.6 4.00 101.6 0.50 12.7 1.88 47.6 7.4 3.3 7.7 3.5
4” (DN 100) Std 40 40S 4in40 4.03 102.3 6.00 152.4 3.63 92.1 5.00 127.0 0.50 12.7 2.13 54.0 6.7 3.1 13 5.9
4.50 114.3 XS 80 80S 4in40 3.83 97.2 6.00 152.4 3.63 92.1 5.00 127.0 0.50 12.7 2.13 54.0 7.7 3.5 13 5.9
120 4in34 3.62 92.1 6.00 152.4 3.63 92.1 5.00 127.0 0.50 12.7 2.13 54.0 8.9 4 13 5.9
160 4in34 3.44 87.3 6.00 152.4 3.63 92.1 5.00 127.0 0.50 12.7 2.13 54.0 10 4.5 13 5.9
XXS 4in31 3.15 80.1 6.00 152.4 3.63 92.1 5.00 127.0 0.50 12.7 2.13 54.0 11.5 5.2 13 5.9
5” (DN 125) Std 40 40S 5in52 5.05 128.2 7.50 190.5 4.38 111.1 6.50 165.1 0.63 15.9 2.75 69.9 13.3 6 27.8 12.6
5.56 141.3 XS 80 80S 5in52 4.81 122.3 7.50 190.5 4.38 111.1 6.50 165.1 0.63 15.9 2.75 69.9 14.8 6.7 27.8 12.6
160 5in46 4.31 109.6 7.50 190.5 4.38 111.1 6.50 165.1 0.63 15.9 2.75 69.9 19.2 8.7 27.8 12.6
XXS 5in40 4.06 103.2 7.50 190.5 4.38 111.1 6.50 165.1 0.63 15.9 2.75 69.9 21.9 9.9 27.8 12.6
6” (DN 150) Std 40 40S 6in62 6.07 154.1 9.25 235.0 4.63 117.5 7.75 196.9 0.75 19.1 2.88 73.0 20.4 9.2 42.6 19.3
6.63 168.3 XS 80 80S 6in56 5.76 146.3 9.25 235.0 4.63 117.5 7.75 196.9 0.81 20.6 2.88 73.0 24.9 11.3 43 19.5
120 6in54 5.50 139.7 9.25 235.0 4.63 117.5 7.75 196.9 0.81 20.6 2.88 73.0 27.7 12.6 43 19.5
160 6in52 5.19 131.8 9.25 235.0 4.63 117.5 7.75 196.9 0.81 20.6 2.88 73.0 30.7 13.9 43 19.5
XXS 6in52 4.90 124.4 9.25 235.0 4.63 117.5 7.75 196.9 0.81 20.6 2.88 73.0 32.7 14.8 43 19.5
8” (DN 200) Std 40 40S 8in82 7.98 202.7 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 33 15 76.2 34.6
8.63 219.1 XS 80 80S 8in76 7.63 193.7 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 40.3 18.3 76.2 34.6
100 8in76 7.44 189.0 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 42.4 19.2 76.2 34.6
120 8in72 7.19 182.6 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 47.8 21.7 76.2 34.6
140 8in72 7.00 177.8 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 49.9 22.6 76.2 34.6
XXS 8in67 6.88 174.6 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 52.9 24 76.2 34.6
160 8in67 6.81 173.1 11.50 292.1 5.38 136.5 10.00 254.0 0.75 19.1 3.19 81.0 53.6 24.3 76.2 34.6
10
Light Duty Butt Weld and Blind Hubs Light Duty Butt Weld and Blind Hubs
N.P.S (DN)
Pipe Sched-
ule
Techlok Desig-nation Hub /
S.Ring
Pipe Hub Hub Hub Lip Blind Hub BW Hub Blind Hub
O.Dia. I.Dia. O.Dia. Length Backface Dia Thickness Thickness Wt. Wt.
‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’
ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm ins. mm Lbs. Kg Lbs. Kg
14” (DN 350) 40 L14in134 13.12 333.3 17.25 438.2 7.00 177.8 15.75 400.1 0.75 19.1 3.50 88.9 83.4 37.8 201.2 91.3
14.00 355.6 XS L14in130 13.00 330.2 17.25 438.2 7.00 177.8 15.75 400.1 0.75 19.1 3.50 88.9 91.7 41.6 201.2 91.3
80 L14in124 12.50 317.5 17.25 438.2 7.00 177.8 15.75 400.1 0.81 20.6 3.50 88.9 110.8 50.3 201.9 91.6
100 L14in124 12.12 307.9 17.25 438.2 7.00 177.8 15.75 400.1 0.81 20.6 3.50 88.9 120.8 54.8 201.9 91.6
120 L14in120 11.81 300.1 17.25 438.2 7.00 177.8 15.75 400.1 0.81 20.6 3.50 88.9 133.8 60.7 201.9 91.6
140 L14in116 11.50 292.1 17.25 438.2 7.00 177.8 15.75 400.1 0.81 20.6 3.50 88.9 143.3 65 201.9 91.6
160 L14in112 11.19 284.2 17.25 438.2 7.00 177.8 15.75 400.1 0.69 17.4 3.50 88.9 153.4 69.6 200.5 91
16” (DN 400) XS 40 L16in152 15.00 381.0 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 115.5 52.4 279.4 126.8
16.00 406.4 60 L16in152 14.69 373.1 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 126.3 57.3 279.4 126.8
80 L16in144 14.31 363.6 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 148.1 67.2 279.4 126.8
100 L16in140 13.94 354.0 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 165.6 75.1 279.4 126.8
120 L16in137 13.56 344.5 19.50 495.3 7.50 190.5 18.00 457.2 0.69 17.4 3.75 95.3 178.1 80.8 278.7 126.4
140 L16in134 13.12 333.3 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 195.7 88.8 279.4 126.8
160 L16in130 12.81 325.4 19.50 495.3 7.50 190.5 18.00 457.2 0.75 19.1 3.75 95.3 209.5 95 279.4 126.8
18” (DN 450) 40 L18in170 16.88 428.7 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 153.3 69.5 375.1 170.1
18.00 457.2 60 L18in170 16.50 419.1 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 169.3 76.8 375.1 170.1
80 L18in160 16.13 409.6 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 197.8 89.7 375.1 170.1
100 L18in160 15.69 398.5 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 216.5 98.2 375.1 170.1
120 L18in152 15.25 387.4 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 241.5 109.6 375.1 170.1
140 L18in152 14.88 377.9 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 255.4 115.9 375.1 170.1
160 L18in144 14.44 366.7 21.75 552.5 8.00 203.2 20.25 514.4 0.75 19.1 4.00 101.6 278.6 126.4 375.1 170.1
20” (DN 500) 40 L20in192 18.81 477.9 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 214 97.1 511.6 232.1
20.00 508 60 L20in185 18.38 466.8 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 243.8 110.6 511.6 232.1
80 L20in180 17.94 455.6 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 273.6 124.1 511.6 232.1
100 L20in180 17.44 442.9 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 294.6 133.8 511.6 232.1
120 L20in170 17.00 431.8 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 327 148.3 511.6 232.1
140 L20in170 16.50 419.1 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 346.5 157.2 511.6 232.1
160 L20in160 16.06 408.0 24.50 622.3 8.00 203.2 23.00 584.2 0.75 19.1 4.25 108.0 375.7 170.4 511.6 232.1
24” (DN 600) 40 L24in225 22.62 574.7 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 354.6 160.8 823.8 373.7
24.00 609.6 60 L24in220 22.06 560.4 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 403.9 183.2 823.8 373.7
80 L24in220 21.56 547.7 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 435.9 197.7 823.8 373.7
100 L24in210 20.94 531.8 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 491.1 222.8 823.8 373.7
120 L24in210 20.38 517.6 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 521.7 236.6 823.8 373.7
140 L24in200 19.88 504.9 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 567.2 257.3 823.8 373.7
160 L24in200 19.31 490.6 29.50 749.3 9.00 228.6 27.50 698.5 1.00 25.4 4.75 120.7 594.4 269.6 823.8 373.7
11
12
Techlok Pressure Temperature Ratings Heavy DutyPressure / Temperature Ratings
Nominal Size
Techlok Size Code
Hub - A350 LF2
Hub - A182 F316L
Hub - UNS 31803
Hub - UNS 32760
Hub - AISI 4130
Hub - UNS N06625
Hub - A694 F65
Hub - A182 F44
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC
psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar
2” H2in13 14207 980 12600 843 19,792 1334 22350 1523 18,267 1,259 25200 973 15628 1077 14312 950
H2in14 13758 949 12245 819 19,234 1297 21720 1480 17,690 1,220 24490 946 15134 1043 13908 923
H2in16 12552 865 11277 754 17,714 1194 20003 1363 16,139 1,113 22554 871 13807 952 12809 850
H2in20 11542 796 10462 700 16,434 1108 18557 1265 14,840 1,023 20924 808 12696 875 11883 789
3” H3in20 13363 921 11850 792 18,614 1255 21020 1433 17,181 1,185 23700 915 14699 1013 13460 893
H3in23 12095 834 10821 724 16,998 1146 19194 1308 15,551 1,072 21642 836 13304 917 12291 816
H3in25 10739 740 9715 650 15,260 1029 17232 1175 13,808 952 19430 750 11813 814 11035 732
H3in27 7868 542 7216 483 11,335 764 12800 872 10,116 697 14432 557 8655 597 8196 544
4” H4in25 13359 921 11763 787 18,477 1246 20865 1422 17,176 1,184 23526 908 14695 1013 13361 887
H4in27 12120 836 10746 719 16,880 1138 19061 1299 15,583 1,074 19649 759 13332 919 12206 810
H4in31 11467 791 10208 683 16,035 1081 17543 1210 14,743 1,016 17543 677 12614 870 11595 769
H4in34 9211 635 8245 551 12,951 873 13784 950 11,843 817 13784 532 10132 699 9365 621
H4in40 6705 462 6115 409 9,605 648 10847 739 8,621 594 11166 431 7375 508 6946 461
8” H8in52 11765 811 10310 689 13,946 962 13946 962 13,960 962 13946 538 12941 892 11711 777
H8in56 10845 748 9505 636 11,976 826 11976 826 11,988 827 11976 462 11929 822 10796 716
H8in62 9087 627 8016 536 10,191 703 10191 703 10,201 703 10191 393 9996 689 9105 604
H8in64 7428 512 6596 441 8,938 616 8938 616 8,947 617 8938 345 8171 563 7492 497
H8in67 6117 422 5475 366 8,041 554 8041 554 7,865 542 8041 310 6729 464 6219 413
H8in72 4708 325 4271 286 6,709 452 7272 501 6,053 417 7272 281 5179 357 4851 322
10” H10in82 6926 478 6110 409 9,598 647 9660 666 8,905 614 9660 373 7618 525 6940 461
H10in84 6220 429 5507 368 8,650 583 9125 629 7,997 551 9125 352 6842 472 6255 415
H10in87 5090 351 4549 304 7,145 482 8069 550 6,545 451 8402 324 5599 386 5167 343
H10in94 3424 236 3103 208 4,875 329 5505 375 4,402 304 6207 240 3766 260 3525 234
H10in97 2595 179 2380 159 3,739 252 4222 288 3,336 230 4760 184 2854 197 2703 179
H10in102 1881 130 1753 117 2,754 186 3110 212 2,418 167 3507 135 2069 143 1992 132
12” H12in97 7170 494 6283 420 8,555 590 8555 590 8,563 590 8555 330 7887 544 7137 474
H12in102 6281 433 5523 369 7,963 549 7963 549 7,971 550 7963 307 6909 476 6274 416
H12in106 5040 347 4466 299 7,014 473 7265 501 6,480 447 7265 281 5544 382 5072 337
H12in112 3882 268 3471 232 5,452 368 6157 420 4,992 344 6655 257 4271 294 3943 262
H12in120 2449 169 2230 149 3,503 236 3956 270 3,149 217 4460 172 2694 186 2533 168
14” H14in106 8691 599 7772 520 9,054 624 9054 624 8,691 599 9054 350 8691 599 8827 586
H14in112 7837 540 6828 457 7,946 548 7946 548 7,960 549 7946 307 7960 549 7756 515
H14in116 6759 466 5917 396 7,275 502 7275 502 7,282 502 7275 281 7282 502 6721 446
H14in120 6290 434 5508 368 7,014 484 7014 484 7,027 484 7014 271 6919 477 6256 415
H14in124 5126 353 4528 303 6,418 442 6418 442 6,423 443 6418 248 5639 389 5143 341
H14in130 4115 284 3650 244 5,734 387 6006 414 5,291 365 6006 232 4526 312 4146 275
H14in134 3232 223 2888 193 4,536 306 5122 349 4,155 286 5581 215 3555 245 3280 218
16” H16in112 11226 774 9741 651 12,899 889 12899 889 12,912 890 12899 498 12349 851 11064 734
H16in120 10137 699 8784 587 11,386 785 11386 785 11,397 786 11386 440 11150 769 9977 662
H16in130 8108 559 7052 472 9,750 672 9750 672 9,760 673 9750 376 8919 615 8010 532
H16in134 7188 496 6266 419 9,061 625 9061 625 9,070 625 9061 350 7907 545 7117 472
H16in137 6526 450 5700 381 8,591 590 8591 592 8,391 579 8591 332 7179 495 6474 430
H16in140 6312 435 5516 369 8,443 576 8443 582 8,115 560 8443 326 6943 479 6265 416
H16in144 5424 374 4763 319 7,482 504 7886 544 6,974 481 7886 304 5966 411 5410 359
H16in152 4091 282 3620 242 5,686 383 6421 438 5,260 363 7148 276 4500 310 4112 273
18” H18in140 6793 468 6560 439 6,793 468 6793 468 6,793 468 6793 262 6793 468 6793 468
H18in144 6345 437 5833 390 6,345 437 6345 437 6,345 437 6345 245 6345 437 6345 429
H18in152 5422 374 4761 318 5,751 397 5751 397 5,751 397 5751 222 5751 397 5408 359
H18in160 4151 286 3666 245 5,237 361 5237 361 5,237 361 5237 202 4566 315 4164 276
H18in170 2726 188 2437 163 3,828 258 4323 295 3,505 242 4648 179 2999 207 2768 184
20” H20in152 6722 463 6716 461 6,716 463 6716 463 6,722 463 6716 259 6722 463 6716 463
H20in160 6121 422 6115 416 6,115 422 6115 422 6,121 422 6115 236 6121 422 6115 422
H20in170 5432 375 5375 359 5,426 374 5426 374 5,432 375 5426 209 5432 375 5426 374
H20in180 4645 320 4073 272 4,853 335 4853 335 4,858 335 4853 187 4858 335 4626 307
H20in185 3753 259 3306 221 4,510 311 4510 311 4,514 311 4510 174 4129 285 3756 249
H20in192 3011 208 2667 178 4,189 282 4256 293 3,871 267 4256 164 3312 228 3029 201
22” H22in160 6904 476 6037 404 6,897 476 6897 476 6,904 476 6897 266 6904 476 6857 455
H22in170 6127 422 5358 358 6,121 422 6121 422 6,127 422 6121 236 6127 422 6086 404
H22in180 5479 378 4791 320 5,473 377 5473 377 5,479 378 5473 211 5479 378 5442 361
H22in185 4564 315 3993 267 5,087 351 5087 351 5,092 351 5087 196 5020 346 4535 301
H22in192 3780 261 3315 222 4,800 331 4800 331 4,805 331 4800 185 4158 287 3765 250
H22in200 2896 200 2559 171 4,020 271 4453 306 3,723 257 4453 172 3186 220 2907 193
H22in210 1886 130 1690 113 2,655 179 2998 204 2,425 167 3380 131 2075 143 1920 127
24” H24in192 5641 389 4815 322 5,835 402 5835 402 5,841 403 5835 225 5841 403 5469 363
H24in200 5234 361 4467 299 5,415 373 5415 373 5,420 374 5415 209 5420 374 5074 337
H24in210 4752 328 4056 271 4,916 339 4916 339 4,921 339 4916 190 4921 339 4607 306
H24in220 3883 268 3398 227 4,487 309 4487 309 4,492 310 4487 173 4271 294 3860 256
H24in225 3200 221 3275 219 4,224 291 4224 291 4,114 284 4224 163 3520 243 3720 247
H24in232 2620 181 2309 154 3,627 262 4025 276 3,369 232 4025 155 2882 199 2623 174
26” H26in225 3985 275 3981 270 3,981 274 3981 274 3,985 275 3981 154 3985 275 3981 274
H26in232 3799 262 3707 248 3,795 262 3795 262 3,799 262 3795 147 3799 262 3795 262
H26in240 3476 240 3037 203 3,565 246 3565 246 3,568 246 3565 138 3568 246 3450 229
H26in244 2998 207 2627 176 3,424 236 3424 236 3,427 236 3424 132 3298 227 2984 198
H26in254 2136 147 1887 126 2,964 214 3164 218 2,746 189 3164 122 2350 162 2143 142
H26in264 1389 96 1244 83 1,954 141 2207 150 1,786 123 2488 96 1528 105 1413 94
H26in270 1059 73 959 64 1,506 109 1701 116 1,362 94 1918 74 1165 80 1089 72
SEE NOTES ON PAGE 15
13
Techlok Pressure Temperature Ratings Heavy Duty cont’d
Pressure / Temperature Ratings
Nominal Size
Techlok Size Code
Hub - A350 LF2
Hub - A182 F316L
Hub - UNS 31803
Hub - UNS 32760
Hub - AISI 4130
Hub - UNS N06625
Hub - A694 F65
Hub - A182 F44
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC
psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar
2” H2in13 14207 980 12600 843 19,792 1334 22350 1523 18,267 1,259 25200 973 15628 1077 14312 950
H2in14 13758 949 12245 819 19,234 1297 21720 1480 17,690 1,220 24490 946 15134 1043 13908 923
H2in16 12552 865 11277 754 17,714 1194 20003 1363 16,139 1,113 22554 871 13807 952 12809 850
H2in20 11542 796 10462 700 16,434 1108 18557 1265 14,840 1,023 20924 808 12696 875 11883 789
3” H3in20 13363 921 11850 792 18,614 1255 21020 1433 17,181 1,185 23700 915 14699 1013 13460 893
H3in23 12095 834 10821 724 16,998 1146 19194 1308 15,551 1,072 21642 836 13304 917 12291 816
H3in25 10739 740 9715 650 15,260 1029 17232 1175 13,808 952 19430 750 11813 814 11035 732
H3in27 7868 542 7216 483 11,335 764 12800 872 10,116 697 14432 557 8655 597 8196 544
4” H4in25 13359 921 11763 787 18,477 1246 20865 1422 17,176 1,184 23526 908 14695 1013 13361 887
H4in27 12120 836 10746 719 16,880 1138 19061 1299 15,583 1,074 19649 759 13332 919 12206 810
H4in31 11467 791 10208 683 16,035 1081 17543 1210 14,743 1,016 17543 677 12614 870 11595 769
H4in34 9211 635 8245 551 12,951 873 13784 950 11,843 817 13784 532 10132 699 9365 621
H4in40 6705 462 6115 409 9,605 648 10847 739 8,621 594 11166 431 7375 508 6946 461
8” H8in52 11765 811 10310 689 13,946 962 13946 962 13,960 962 13946 538 12941 892 11711 777
H8in56 10845 748 9505 636 11,976 826 11976 826 11,988 827 11976 462 11929 822 10796 716
H8in62 9087 627 8016 536 10,191 703 10191 703 10,201 703 10191 393 9996 689 9105 604
H8in64 7428 512 6596 441 8,938 616 8938 616 8,947 617 8938 345 8171 563 7492 497
H8in67 6117 422 5475 366 8,041 554 8041 554 7,865 542 8041 310 6729 464 6219 413
H8in72 4708 325 4271 286 6,709 452 7272 501 6,053 417 7272 281 5179 357 4851 322
10” H10in82 6926 478 6110 409 9,598 647 9660 666 8,905 614 9660 373 7618 525 6940 461
H10in84 6220 429 5507 368 8,650 583 9125 629 7,997 551 9125 352 6842 472 6255 415
H10in87 5090 351 4549 304 7,145 482 8069 550 6,545 451 8402 324 5599 386 5167 343
H10in94 3424 236 3103 208 4,875 329 5505 375 4,402 304 6207 240 3766 260 3525 234
H10in97 2595 179 2380 159 3,739 252 4222 288 3,336 230 4760 184 2854 197 2703 179
H10in102 1881 130 1753 117 2,754 186 3110 212 2,418 167 3507 135 2069 143 1992 132
12” H12in97 7170 494 6283 420 8,555 590 8555 590 8,563 590 8555 330 7887 544 7137 474
H12in102 6281 433 5523 369 7,963 549 7963 549 7,971 550 7963 307 6909 476 6274 416
H12in106 5040 347 4466 299 7,014 473 7265 501 6,480 447 7265 281 5544 382 5072 337
H12in112 3882 268 3471 232 5,452 368 6157 420 4,992 344 6655 257 4271 294 3943 262
H12in120 2449 169 2230 149 3,503 236 3956 270 3,149 217 4460 172 2694 186 2533 168
14” H14in106 8691 599 7772 520 9,054 624 9054 624 8,691 599 9054 350 8691 599 8827 586
H14in112 7837 540 6828 457 7,946 548 7946 548 7,960 549 7946 307 7960 549 7756 515
H14in116 6759 466 5917 396 7,275 502 7275 502 7,282 502 7275 281 7282 502 6721 446
H14in120 6290 434 5508 368 7,014 484 7014 484 7,027 484 7014 271 6919 477 6256 415
H14in124 5126 353 4528 303 6,418 442 6418 442 6,423 443 6418 248 5639 389 5143 341
H14in130 4115 284 3650 244 5,734 387 6006 414 5,291 365 6006 232 4526 312 4146 275
H14in134 3232 223 2888 193 4,536 306 5122 349 4,155 286 5581 215 3555 245 3280 218
16” H16in112 11226 774 9741 651 12,899 889 12899 889 12,912 890 12899 498 12349 851 11064 734
H16in120 10137 699 8784 587 11,386 785 11386 785 11,397 786 11386 440 11150 769 9977 662
H16in130 8108 559 7052 472 9,750 672 9750 672 9,760 673 9750 376 8919 615 8010 532
H16in134 7188 496 6266 419 9,061 625 9061 625 9,070 625 9061 350 7907 545 7117 472
H16in137 6526 450 5700 381 8,591 590 8591 592 8,391 579 8591 332 7179 495 6474 430
H16in140 6312 435 5516 369 8,443 576 8443 582 8,115 560 8443 326 6943 479 6265 416
H16in144 5424 374 4763 319 7,482 504 7886 544 6,974 481 7886 304 5966 411 5410 359
H16in152 4091 282 3620 242 5,686 383 6421 438 5,260 363 7148 276 4500 310 4112 273
18” H18in140 6793 468 6560 439 6,793 468 6793 468 6,793 468 6793 262 6793 468 6793 468
H18in144 6345 437 5833 390 6,345 437 6345 437 6,345 437 6345 245 6345 437 6345 429
H18in152 5422 374 4761 318 5,751 397 5751 397 5,751 397 5751 222 5751 397 5408 359
H18in160 4151 286 3666 245 5,237 361 5237 361 5,237 361 5237 202 4566 315 4164 276
H18in170 2726 188 2437 163 3,828 258 4323 295 3,505 242 4648 179 2999 207 2768 184
20” H20in152 6722 463 6716 461 6,716 463 6716 463 6,722 463 6716 259 6722 463 6716 463
H20in160 6121 422 6115 416 6,115 422 6115 422 6,121 422 6115 236 6121 422 6115 422
H20in170 5432 375 5375 359 5,426 374 5426 374 5,432 375 5426 209 5432 375 5426 374
H20in180 4645 320 4073 272 4,853 335 4853 335 4,858 335 4853 187 4858 335 4626 307
H20in185 3753 259 3306 221 4,510 311 4510 311 4,514 311 4510 174 4129 285 3756 249
H20in192 3011 208 2667 178 4,189 282 4256 293 3,871 267 4256 164 3312 228 3029 201
22” H22in160 6904 476 6037 404 6,897 476 6897 476 6,904 476 6897 266 6904 476 6857 455
H22in170 6127 422 5358 358 6,121 422 6121 422 6,127 422 6121 236 6127 422 6086 404
H22in180 5479 378 4791 320 5,473 377 5473 377 5,479 378 5473 211 5479 378 5442 361
H22in185 4564 315 3993 267 5,087 351 5087 351 5,092 351 5087 196 5020 346 4535 301
H22in192 3780 261 3315 222 4,800 331 4800 331 4,805 331 4800 185 4158 287 3765 250
H22in200 2896 200 2559 171 4,020 271 4453 306 3,723 257 4453 172 3186 220 2907 193
H22in210 1886 130 1690 113 2,655 179 2998 204 2,425 167 3380 131 2075 143 1920 127
24” H24in192 5641 389 4815 322 5,835 402 5835 402 5,841 403 5835 225 5841 403 5469 363
H24in200 5234 361 4467 299 5,415 373 5415 373 5,420 374 5415 209 5420 374 5074 337
H24in210 4752 328 4056 271 4,916 339 4916 339 4,921 339 4916 190 4921 339 4607 306
H24in220 3883 268 3398 227 4,487 309 4487 309 4,492 310 4487 173 4271 294 3860 256
H24in225 3200 221 3275 219 4,224 291 4224 291 4,114 284 4224 163 3520 243 3720 247
H24in232 2620 181 2309 154 3,627 262 4025 276 3,369 232 4025 155 2882 199 2623 174
26” H26in225 3985 275 3981 270 3,981 274 3981 274 3,985 275 3981 154 3985 275 3981 274
H26in232 3799 262 3707 248 3,795 262 3795 262 3,799 262 3795 147 3799 262 3795 262
H26in240 3476 240 3037 203 3,565 246 3565 246 3,568 246 3565 138 3568 246 3450 229
H26in244 2998 207 2627 176 3,424 236 3424 236 3,427 236 3424 132 3298 227 2984 198
H26in254 2136 147 1887 126 2,964 214 3164 218 2,746 189 3164 122 2350 162 2143 142
H26in264 1389 96 1244 83 1,954 141 2207 150 1,786 123 2488 96 1528 105 1413 94
H26in270 1059 73 959 64 1,506 109 1701 116 1,362 94 1918 74 1165 80 1089 72
Pressure / Temperature Ratings
Nominal Size
Techlok Size Code
Hub - A350 LF2
Hub - A182 F316L
Hub - UNS 31803
Hub - UNS 32760
Hub - AISI 4130
Hub - UNS N06625
Hub - A694 F65
Hub - A182 F44
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC
psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar
2” H2in13 14207 980 12600 843 19,792 1334 22350 1523 18,267 1,259 25200 973 15628 1077 14312 950
H2in14 13758 949 12245 819 19,234 1297 21720 1480 17,690 1,220 24490 946 15134 1043 13908 923
H2in16 12552 865 11277 754 17,714 1194 20003 1363 16,139 1,113 22554 871 13807 952 12809 850
H2in20 11542 796 10462 700 16,434 1108 18557 1265 14,840 1,023 20924 808 12696 875 11883 789
3” H3in20 13363 921 11850 792 18,614 1255 21020 1433 17,181 1,185 23700 915 14699 1013 13460 893
H3in23 12095 834 10821 724 16,998 1146 19194 1308 15,551 1,072 21642 836 13304 917 12291 816
H3in25 10739 740 9715 650 15,260 1029 17232 1175 13,808 952 19430 750 11813 814 11035 732
H3in27 7868 542 7216 483 11,335 764 12800 872 10,116 697 14432 557 8655 597 8196 544
4” H4in25 13359 921 11763 787 18,477 1246 20865 1422 17,176 1,184 23526 908 14695 1013 13361 887
H4in27 12120 836 10746 719 16,880 1138 19061 1299 15,583 1,074 19649 759 13332 919 12206 810
H4in31 11467 791 10208 683 16,035 1081 17543 1210 14,743 1,016 17543 677 12614 870 11595 769
H4in34 9211 635 8245 551 12,951 873 13784 950 11,843 817 13784 532 10132 699 9365 621
H4in40 6705 462 6115 409 9,605 648 10847 739 8,621 594 11166 431 7375 508 6946 461
8” H8in52 11765 811 10310 689 13,946 962 13946 962 13,960 962 13946 538 12941 892 11711 777
H8in56 10845 748 9505 636 11,976 826 11976 826 11,988 827 11976 462 11929 822 10796 716
H8in62 9087 627 8016 536 10,191 703 10191 703 10,201 703 10191 393 9996 689 9105 604
H8in64 7428 512 6596 441 8,938 616 8938 616 8,947 617 8938 345 8171 563 7492 497
H8in67 6117 422 5475 366 8,041 554 8041 554 7,865 542 8041 310 6729 464 6219 413
H8in72 4708 325 4271 286 6,709 452 7272 501 6,053 417 7272 281 5179 357 4851 322
10” H10in82 6926 478 6110 409 9,598 647 9660 666 8,905 614 9660 373 7618 525 6940 461
H10in84 6220 429 5507 368 8,650 583 9125 629 7,997 551 9125 352 6842 472 6255 415
H10in87 5090 351 4549 304 7,145 482 8069 550 6,545 451 8402 324 5599 386 5167 343
H10in94 3424 236 3103 208 4,875 329 5505 375 4,402 304 6207 240 3766 260 3525 234
H10in97 2595 179 2380 159 3,739 252 4222 288 3,336 230 4760 184 2854 197 2703 179
H10in102 1881 130 1753 117 2,754 186 3110 212 2,418 167 3507 135 2069 143 1992 132
12” H12in97 7170 494 6283 420 8,555 590 8555 590 8,563 590 8555 330 7887 544 7137 474
H12in102 6281 433 5523 369 7,963 549 7963 549 7,971 550 7963 307 6909 476 6274 416
H12in106 5040 347 4466 299 7,014 473 7265 501 6,480 447 7265 281 5544 382 5072 337
H12in112 3882 268 3471 232 5,452 368 6157 420 4,992 344 6655 257 4271 294 3943 262
H12in120 2449 169 2230 149 3,503 236 3956 270 3,149 217 4460 172 2694 186 2533 168
14” H14in106 8691 599 7772 520 9,054 624 9054 624 8,691 599 9054 350 8691 599 8827 586
H14in112 7837 540 6828 457 7,946 548 7946 548 7,960 549 7946 307 7960 549 7756 515
H14in116 6759 466 5917 396 7,275 502 7275 502 7,282 502 7275 281 7282 502 6721 446
H14in120 6290 434 5508 368 7,014 484 7014 484 7,027 484 7014 271 6919 477 6256 415
H14in124 5126 353 4528 303 6,418 442 6418 442 6,423 443 6418 248 5639 389 5143 341
H14in130 4115 284 3650 244 5,734 387 6006 414 5,291 365 6006 232 4526 312 4146 275
H14in134 3232 223 2888 193 4,536 306 5122 349 4,155 286 5581 215 3555 245 3280 218
16” H16in112 11226 774 9741 651 12,899 889 12899 889 12,912 890 12899 498 12349 851 11064 734
H16in120 10137 699 8784 587 11,386 785 11386 785 11,397 786 11386 440 11150 769 9977 662
H16in130 8108 559 7052 472 9,750 672 9750 672 9,760 673 9750 376 8919 615 8010 532
H16in134 7188 496 6266 419 9,061 625 9061 625 9,070 625 9061 350 7907 545 7117 472
H16in137 6526 450 5700 381 8,591 590 8591 592 8,391 579 8591 332 7179 495 6474 430
H16in140 6312 435 5516 369 8,443 576 8443 582 8,115 560 8443 326 6943 479 6265 416
H16in144 5424 374 4763 319 7,482 504 7886 544 6,974 481 7886 304 5966 411 5410 359
H16in152 4091 282 3620 242 5,686 383 6421 438 5,260 363 7148 276 4500 310 4112 273
18” H18in140 6793 468 6560 439 6,793 468 6793 468 6,793 468 6793 262 6793 468 6793 468
H18in144 6345 437 5833 390 6,345 437 6345 437 6,345 437 6345 245 6345 437 6345 429
H18in152 5422 374 4761 318 5,751 397 5751 397 5,751 397 5751 222 5751 397 5408 359
H18in160 4151 286 3666 245 5,237 361 5237 361 5,237 361 5237 202 4566 315 4164 276
H18in170 2726 188 2437 163 3,828 258 4323 295 3,505 242 4648 179 2999 207 2768 184
20” H20in152 6722 463 6716 461 6,716 463 6716 463 6,722 463 6716 259 6722 463 6716 463
H20in160 6121 422 6115 416 6,115 422 6115 422 6,121 422 6115 236 6121 422 6115 422
H20in170 5432 375 5375 359 5,426 374 5426 374 5,432 375 5426 209 5432 375 5426 374
H20in180 4645 320 4073 272 4,853 335 4853 335 4,858 335 4853 187 4858 335 4626 307
H20in185 3753 259 3306 221 4,510 311 4510 311 4,514 311 4510 174 4129 285 3756 249
H20in192 3011 208 2667 178 4,189 282 4256 293 3,871 267 4256 164 3312 228 3029 201
22” H22in160 6904 476 6037 404 6,897 476 6897 476 6,904 476 6897 266 6904 476 6857 455
H22in170 6127 422 5358 358 6,121 422 6121 422 6,127 422 6121 236 6127 422 6086 404
H22in180 5479 378 4791 320 5,473 377 5473 377 5,479 378 5473 211 5479 378 5442 361
H22in185 4564 315 3993 267 5,087 351 5087 351 5,092 351 5087 196 5020 346 4535 301
H22in192 3780 261 3315 222 4,800 331 4800 331 4,805 331 4800 185 4158 287 3765 250
H22in200 2896 200 2559 171 4,020 271 4453 306 3,723 257 4453 172 3186 220 2907 193
H22in210 1886 130 1690 113 2,655 179 2998 204 2,425 167 3380 131 2075 143 1920 127
24” H24in192 5641 389 4815 322 5,835 402 5835 402 5,841 403 5835 225 5841 403 5469 363
H24in200 5234 361 4467 299 5,415 373 5415 373 5,420 374 5415 209 5420 374 5074 337
H24in210 4752 328 4056 271 4,916 339 4916 339 4,921 339 4916 190 4921 339 4607 306
H24in220 3883 268 3398 227 4,487 309 4487 309 4,492 310 4487 173 4271 294 3860 256
H24in225 3200 221 3275 219 4,224 291 4224 291 4,114 284 4224 163 3520 243 3720 247
H24in232 2620 181 2309 154 3,627 262 4025 276 3,369 232 4025 155 2882 199 2623 174
26” H26in225 3985 275 3981 270 3,981 274 3981 274 3,985 275 3981 154 3985 275 3981 274
H26in232 3799 262 3707 248 3,795 262 3795 262 3,799 262 3795 147 3799 262 3795 262
H26in240 3476 240 3037 203 3,565 246 3565 246 3,568 246 3565 138 3568 246 3450 229
H26in244 2998 207 2627 176 3,424 236 3424 236 3,427 236 3424 132 3298 227 2984 198
H26in254 2136 147 1887 126 2,964 214 3164 218 2,746 189 3164 122 2350 162 2143 142
H26in264 1389 96 1244 83 1,954 141 2207 150 1,786 123 2488 96 1528 105 1413 94
H26in270 1059 73 959 64 1,506 109 1701 116 1,362 94 1918 74 1165 80 1089 72
SEE NOTES ON PAGE 15
14
Techlok Pressure Temperature Ratings Standard DutyPressure / Temperature Ratings
Nominal Size
Techlok Size Code
Hub - A350 LF2
Hub - A182 F316L
Hub - UNS 31803
Hub - UNS 32760
Hub - AISI 4130
Hub - UNS N06625
Hub - A694 F65
Hub - A182 F44
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC
psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar
1” 1in4 14481 998 13337 892 20,949 1412 23657 1612 18,619 1,284 26673 1030 15929 1098 15148 1005
1in5 13149 907 12396 829 19,471 1313 21987 1499 16,906 1,166 24791 957 14463 997 14079 934
1in7 8423 581 9364 626 14,710 992 16611 1132 10,830 747 18439 712 9265 639 10637 706
1in11 4216 291 5477 366 8,603 580 9715 662 5,421 374 10953 423 4638 320 6221 413
1.5” 1.5in11 12670 874 11634 778 18,275 1232 20637 1407 16,290 1,123 23269 898 13937 961 13215 877
1.5in13 8518 587 8689 581 13,649 920 15412 1051 10,952 755 17378 671 9370 646 9869 655
1.5in14 7143 492 7468 499 11,730 791 13246 903 9,184 633 14936 577 7857 542 8482 563
2” 2in13 11926 822 10917 730 17,148 1156 19364 1320 15,333 1,057 21833 843 13118 904 12400 823
2in14 11059 762 10301 689 16,181 1091 18272 1245 14,218 980 20602 795 12164 839 11701 777
2in16 8245 568 8193 548 12,870 868 14533 991 10,600 731 16127 623 9069 625 9306 618
2in20 6090 420 5970 399 9,378 632 10590 722 7,830 540 11940 461 6698 462 6781 450
3” 3in20 12285 847 11013 737 17,300 1166 19535 1332 15,796 1,089 22027 850 13514 932 12509 830
3in23 10679 736 9699 649 15,235 1027 17204 1173 13,730 947 18421 711 11747 810 11016 731
3in25 7781 536 7201 482 11,312 763 12773 871 10,004 690 14402 556 8559 590 8179 543
3in27 4480 309 4378 293 6,877 464 7765 529 5,761 397 8756 338 4928 340 4972 330
3in31 3115 215 2199 147 3,454 233 3900 266 4,006 276 4398 170 3427 236 2498 166
4” 4in25 12044 830 10719 717 16,837 1135 19013 1296 15,485 1,068 20738 801 13248 913 12175 808
4in27 9936 685 8906 596 13,989 943 15797 1077 12,775 881 16191 625 10930 754 10115 671
4in31 8473 584 7664 513 12,039 812 13595 927 10,894 751 14455 558 9320 643 8706 578
4in34 5354 369 5034 337 7,908 533 8930 609 6,883 475 10069 389 5889 406 5718 379
4in40 2916 201 2884 193 4,531 305 5116 349 3,749 258 5769 223 3208 221 3276 217
5” 5in31 12779 881 11250 752 17,672 1191 19133 1319 16,430 1,133 19133 739 14057 969 12778 848
5in34 11476 791 10172 680 15,033 1037 15033 1036 14,755 1,017 15033 580 12623 870 11554 767
5in40 9661 666 8587 574 12,180 840 12180 840 12,192 841 12180 470 10627 733 9754 647
5in42 8743 603 7802 522 11,497 793 11497 793 11,241 775 11497 444 9617 663 8862 588
5in46 5887 406 5380 360 8,451 570 9036 623 7,569 522 9036 349 6476 446 6111 406
5in52 3082 212 2947 197 4,629 312 5227 356 3,963 273 5894 228 3390 234 3347 222
6” 6in40 12410 856 10878 727 16,071 1108 16071 1108 15,955 1,100 16071 621 13650 941 12356 820
6in42 11940 823 10489 701 15,170 1046 15170 1046 15,185 1,047 15170 586 13134 906 11914 791
6in46 10213 704 8999 602 11,923 822 11923 822 11,935 823 11923 460 11235 775 10221 678
6in52 7463 515 6654 445 9,620 663 9620 663 9,595 662 9620 371 8209 566 7558 502
6in56 5486 378 4986 333 7,831 528 8261 570 7,053 486 8261 319 6034 416 5663 376
6in62 3609 249 3362 225 5,281 356 5964 407 4,640 320 6724 260 3970 274 3819 253
8” 8in62 9595 662 8736 584 9,586 661 9586 661 9,595 662 9586 370 9595 662 9586 645
8in67 6981 481 6189 414 7,563 521 7563 521 7,570 522 7563 292 7570 522 7030 467
8in72 5561 383 4996 334 6,840 472 6840 472 6,847 472 6840 264 6117 422 5674 377
8in76 3899 269 3553 238 5,582 376 6026 415 5,012 346 6026 233 4288 296 4036 268
8in82 2560 176 2386 160 3,747 253 4231 288 3,291 227 4771 184 2816 194 2710 180
SEE NOTES ON PAGE 15
15
Techlok Pressure Temperature Ratings Light DutyPressure / Temperature Ratings
Nominal Size
Techlok Size Code
Hub - A350 LF2
Hub - A182 F316L
Hub - UNS 31803
Hub - UNS 32760
Hub - AISI 4130
Hub - UNS N06625
Hub - A694 F65
Hub - A182 F44
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
Clamp - Low Alloy Steel
100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC 100ºF 50ºC
psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar psi Bar
14” L14in112 5618 387 4815 322 5816 401 5816 401 5,822 401 5816 225 5822 401 5470 363
L14in116 5144 355 4409 295 5325 367 5325 367 5,330 367 5325 206 5330 367 5008 332
L14in120 4682 323 4154 278 5133 354 5133 354 5,138 354 5133 198 5138 354 4718 313
L14in124 3562 246 3188 213 4697 324 4697 324 4,580 316 4697 181 3918 270 3621 240
L14in130 2728 188 2466 165 4053 279 4374 298 3,507 242 4396 170 3001 207 2801 186
L14in134 1977 136 1814 121 2981 206 3217 219 2,542 175 3627 140 2174 150 2060 137
16” L16in130 4428 305 3796 254 4934 340 4934 340 4,939 341 4934 191 4871 336 4311 286
L16in134 4115 284 3527 236 4586 316 4586 316 4,591 317 4586 177 4526 312 4006 266
L16in137 3902 269 3344 224 4348 300 4348 300 4,352 300 4348 168 4292 296 3799 252
L16in140 3834 264 3287 220 4273 295 4273 295 4,277 295 4273 165 4218 291 3733 248
L16in144 3337 230 2976 199 3991 275 3991 275 3,995 275 3991 154 3670 253 3380 224
L16in152 2263 156 2048 137 3366 232 3617 247 2,910 201 3617 140 2489 172 2326 154
18” L18in144 4085 282 3558 238 4081 281 4081 281 4,085 282 4081 158 4085 282 4041 268
L18in152 3703 255 3225 216 3699 255 3699 255 3,703 255 3699 143 3703 255 3663 243
L18in160 3371 232 2936 196 3368 232 3368 232 3,371 232 3368 130 3371 232 3335 221
L18in170 2486 171 2229 149 2989 206 2989 206 2,992 206 2989 115 2734 189 2532 168
20” L20in160 3777 260 3238 217 4544 313 4544 313 4,549 314 4544 175 4155 286 3678 244
L20in170 3352 231 2873 192 4033 278 4033 278 4,037 278 4033 156 3687 254 3263 217
L20in180 2998 207 2570 172 3607 249 3607 249 3,611 249 3607 139 3298 227 2919 194
L20in185 2786 192 2388 160 3351 231 3351 231 3,354 231 3351 129 3064 211 2712 180
L20in192 2590 179 2253 151 3163 218 3163 218 3,166 218 3163 122 2849 196 2559 170
24” L24in200 3700 255 3357 225 3696 255 3696 255 3,700 255 3696 143 3700 255 3696 249
L24in210 3359 232 3048 204 3356 231 3356 231 3,359 232 3356 130 3359 232 3356 226
L24in220 3066 211 2783 186 3063 211 3063 211 3,066 211 3063 118 3066 211 3063 206
L24in225 2887 199 2619 175 2884 199 2884 199 2,887 199 2884 111 2887 199 2884 194
NOTES
1. Pressure ratings are intended as a selection guide and assume the following criteria:a. Bore of hub is based upon the sealring boreb. Corrosion allowance is 0.063” for carbon/low alloy steels, zero for stainless steels.c. Hydrotest pressure = 1.5 x pressure rating.
2. Pressure ratings assume AISI 4140 clamps (100 / 75 Ksi, 690/517 MPa) or equivalent.
3. Pressure ratings are calculated on the basis of ASME VIII Div 2 methods and analysis.
4. Pressure ratings to API criteria/materials can be undertaken on request.
5. Combined pressure / external loads / temperature analysis can be undertaken on request.
6. Using the full rated pressure of 316 SS components may result in minor distortions duringHydrotest. If in doubt, contact Vector International for further details.
7. 4130 Hub material assumes 90 Ksi tensile (620 MPa) and 60 Ksi yield (414 MPa).
At the heart of the Techlok connector, there's well provensuccessful sealing technology - the metal-to-metal sealring.
The sealring creates a leak-free connection, unlike flangeswhich leak causing environmental pollution (hydrocarbonemissions), and bring about delays in commissioning andproduction, which in turn has severe cost implications.
The Vector sealring does not leak. It offers weight savings,avoids unscheduled downtime and reduces operationalcosts.
The technology behind the sealring is not limited to Vectorproducts. It can be applied to standard flanges as well asspecial connections for which Vector can design dedicatedsealing solutions.
Vector International’s sealrings have been proven over many years of reliable use
in all conditions and in thousands of applications across a wide range of industries.
Each Vector sealring incorporates three essential principles for a high strength, high
integrity joint:
• Minimum possible seal diameter to reduce pressure separation loads
• Isolated from piping loads
• Pressure energised for enhanced seal integrity
Vector sealrings are completely confined within the connection and cannot be
damaged by bending loads or by overtightening the bolts. All sealrings are available
in a wide range of standard sizes and materials, with special materials to suit special
applications available on request.
Sealring
The Complete Solution
technology
16
Standard Sealrings
The standard sealring has many advantages over conventional gaskets, such as:
• Assured joint integrity first time – every time
• Minimal gasket forces and seal diameter, enabling the load capacity of the
components to be maximised
• Reliable and proven pressure-energised bore seal concept, making the Techlok
Clamp Connector up to 75% lighter than comparably-rated flanges
• Gas-tight metal-to-metal seal
• Reusable
The sealring consists of a central rib section and two seal lips which are tapered to
match the conical seat profile of the hubs. It is these lips which provide the pressure-
energised seal with deformation remaining essentially elastic throughout, and making
the sealring reusable.
The rib acts as a positive stop during make-up, prevents the lips from being
crushed by overtightening, and transfers compressive and bending loads from one
hub to the other.
Coating the sealring with a lubricant such as PTFE prevents the surfaces galling
during make-up and enhances reusability.
The sealring is manufactured from high strength steel compatible with the hub
materials. Typically precipitation-hardening stainless steels, such as grades 630 or 660,
or Alloy 718, are specified for corrosion resistant applications, while low alloy steels
are used for carbon steel pipelines.
17
Sealringtechnology
18
Blind Sealrings
• Blind sealrings are an effective way of blanking-off pipe runs, particularly during
construction work-over
• Designed as an auxiliary pressure isolation device and should only be used in
conjunction with other isolation equipment, e.g. valves
• Blinds are marked with a ‘max working pressure’. Check for the suitability for your
application with Vector International
• Smaller sizes can usually take full line pressure
• Available also with Dur-O-Seal option
• Can be provided with indicator flags
• Blind sealrings are not recommended for permanent installation or for cyclic
loading
Strainer Sealrings
• Special Techlok Sealrings, designed and manufactured to the clients own
specification
• During start-up phases, this can be used to protect high value equipment such as
valves, pumps and compressors
• Can be manufactured in any traditional material associated with the Techlok
sealring
19
Dur-O-Seal
• Dur-O-Seal is an alternative sealing mechanism to the standard metal-to-metal
Techlok sealring. It is used to maximum advantage where seats are badly corroded
or damaged, or in sandy conditions on service and vessel closures/pig launchers
• Design ideal where repeated make-breaks are required
• Dur-O-Seal is fully interchangeable with all clamp connectors
• It utilises standard, easily replaceable '0' rings
• Eliminates the need for costly down time for weld repair or on-site machining of
damaged hubs
• It has a zero extrusion gap which allows for high pressure capacity, and ensures no
loss of performance. Note: Dur-O-Seal is not intended for permanent installations
where 'O' ring seals are not to be used due to operating conditions
Orifice Sealrings
• Used in conjunction with Techlok Orifice connectors
• Can be supplied as one piece or two piece assemblies (such as replacement
orifice)
• Can be supplied for flow measurement or as a restriction orifice
• Sizing calculations can be supplied
• Available for all sizes of Techlok sealrings
Transition Sealrings
• Designed to accommodate specification breaks of similar nominal
pipe sizes i.e. 6in 46 matching to 6in 52 would utilise a transition
seal size 46/52
20
Techlok SealringsTechlok Sealrings
Sealring Size
Outside Diameter Inside Diameter Rib Thickness Overall Thickness Sealring Weight.
A B C D
ins mm ins mm ins mm ins mm Lbs Kg
4 1.00 25 0.50 12.7 0.13 3.2 0.38 9.5 0.03 0.01
5 1.09 28 0.63 15.9 0.13 3.2 0.38 9.5 0.03 0.01
7 1.38 35 0.91 23.0 0.13 3.2 0.38 9.5 0.04 0.02
11 1.75 44 1.13 28.6 0.13 3.2 0.38 9.5 0.06 0.03
13 2.38 60 1.50 38.1 0.13 3.2 0.38 9.5 0.11 0.05
14 2.63 67 1.61 40.9 0.25 6.4 0.56 14.3 0.28 0.13
16 2.75 70 1.87 47.4 0.25 6.4 0.63 15.9 0.28 0.13
20 3.25 83 2.06 52.4 0.25 6.4 0.75 19.1 0.45 0.20
23 3.50 89 2.38 60.3 0.25 6.4 0.75 19.1 0.48 0.22
25 4.00 102 2.67 67.9 0.25 6.4 0.75 19.1 0.62 0.28
27 4.25 108 3.06 77.8 0.25 6.4 0.75 19.1 0.62 0.28
31 4.50 114 3.25 82.5 0.25 6.4 0.75 19.1 0.69 0.31
34 5.00 127 3.69 93.7 0.25 6.4 0.75 19.1 0.80 0.36
40 5.50 140 4.06 103 0.25 6.4 1.00 25.4 1.13 0.51
42 6.38 162 4.19 106 0.25 6.4 1.00 25.4 1.68 0.76
46 6.25 159 4.75 121 0.25 6.4 1.00 25.4 1.34 0.61
52 6.63 168 5.31 135 0.25 6.4 1.00 25.4 1.33 0.60
54 6.81 173 5.50 140 0.25 6.4 1.00 25.4 1.57 0.71
56 7.50 191 5.75 146 0.25 6.4 1.00 25.4 1.82 0.83
62 7.88 200 6.07 154 0.38 9.5 1.38 34.9 3.13 1.42
64 8.63 219 6.50 165 0.38 9.5 1.38 34.9 3.80 1.72
67 8.75 222 6.88 175 0.38 9.5 1.38 34.9 3.61 1.64
72 9.50 241 7.25 184 0.38 9.5 1.38 34.9 4.40 2.00
76 10.00 254 7.75 197 0.38 9.5 1.38 34.9 4.67 2.12
82 10.13 257 8.25 210 0.38 9.5 1.38 34.9 4.26 1.93
84 11.13 283 8.50 216 0.38 9.5 1.38 34.9 5.79 2.63
87 11.38 289 8.88 225 0.38 9.5 1.38 34.9 5.77 2.62
91 11.50 292 9.13 232 0.38 9.5 1.38 34.9 5.66 2.57
92 11.63 295 9.25 235 0.38 9.5 1.38 34.9 5.78 2.62
94 11.75 298 9.50 241 0.38 9.5 1.38 34.9 5.61 2.54
97 12.00 305 9.88 251 0.38 9.5 1.38 34.9 5.55 2.52
102 12.25 311 10.25 260 0.38 9.5 1.38 34.9 5.48 2.49
106 12.75 324 10.75 273 0.38 9.5 1.38 34.9 5.72 2.59
112 14.13 359 11.25 286 0.38 9.5 1.63 41.3 12.30 5.58
116 14.13 359 11.75 298 0.38 9.5 1.38 34.9 7.21 3.27
120 13.88 352 12.00 305 0.38 9.5 1.38 34.9 6.04 2.74
122 14.13 359 12.25 311 0.38 9.5 1.38 34.9 6.16 2.79
124 14.63 372 12.50 318 0.38 9.5 1.38 34.9 7.10 3.22
130 15.00 381 13.00 330 0.50 12.7 1.50 38.1 8.47 3.84
134 15.50 394 13.50 343 0.50 12.7 1.50 38.1 8.78 3.98
137 16.50 419 13.88 352 0.63 15.9 1.63 41.3 13.70 6.21
140 16.50 419 14.00 356 0.50 12.7 1.50 38.1 10.98 4.98
144 17.00 432 14.50 368 0.50 12.7 1.50 38.1 11.35 5.15
152 17.75 451 15.25 387 0.50 12.7 1.50 38.1 11.89 5.39
160 18.50 470 16.00 406 0.50 12.7 1.50 38.1 12.44 5.64
170 19.44 494 17.00 432 0.50 12.7 1.75 44.4 13.84 6.28
180 20.50 521 18.00 457 0.50 12.7 1.75 44.4 14.61 6.63
185 21.25 540 18.62 473 0.50 12.7 1.75 44.4 16.37 7.43
192 22.00 559 19.25 489 0.50 12.7 1.75 44.4 17.16 7.78
200 22.75 578 20.00 508 0.50 12.7 1.75 44.4 17.80 8.07
210 24.00 610 21.00 533 0.50 12.7 2.00 50.8 21.36 9.69
220 25.00 635 22.00 559 0.50 12.7 2.00 50.8 22.32 10.12
225 25.75 654 22.62 575 0.50 12.7 2.00 50.8 24.19 10.97
232 26.38 670 23.25 591 0.50 12.7 2.00 50.8 24.29 11.02
240 27.50 699 24.00 610 0.50 12.7 2.00 50.8 27.42 12.44
244 27.75 705 24.50 622 0.50 12.7 2.00 50.8 26.34 11.95
254 28.88 733 25.50 648 0.50 12.7 2.00 50.8 28.20 12.79
264 30.00 762 26.50 673 0.50 12.7 2.00 50.8 30.12 13.66
274 31.12 791 27.50 699 0.50 12.7 2.00 50.8 32.31 14.66
284 32.25 819 28.50 724 0.50 12.7 2.00 50.8 34.36 15.59
292 32.25 819 29.25 743 0.50 12.7 2.00 50.8 29.30 13.29
21
Techlok Sealrings cont’d
Techlok Sealrings
Sealring Size
Outside Diameter Inside Diameter Rib Thickness Overall Thickness Sealring Weight.
A B C D
ins mm ins mm ins mm ins mm Lbs Kg
4 1.00 25 0.50 12.7 0.13 3.2 0.38 9.5 0.03 0.01
5 1.09 28 0.63 15.9 0.13 3.2 0.38 9.5 0.03 0.01
7 1.38 35 0.91 23.0 0.13 3.2 0.38 9.5 0.04 0.02
11 1.75 44 1.13 28.6 0.13 3.2 0.38 9.5 0.06 0.03
13 2.38 60 1.50 38.1 0.13 3.2 0.38 9.5 0.11 0.05
14 2.63 67 1.61 40.9 0.25 6.4 0.56 14.3 0.28 0.13
16 2.75 70 1.87 47.4 0.25 6.4 0.63 15.9 0.28 0.13
20 3.25 83 2.06 52.4 0.25 6.4 0.75 19.1 0.45 0.20
23 3.50 89 2.38 60.3 0.25 6.4 0.75 19.1 0.48 0.22
25 4.00 102 2.67 67.9 0.25 6.4 0.75 19.1 0.62 0.28
27 4.25 108 3.06 77.8 0.25 6.4 0.75 19.1 0.62 0.28
31 4.50 114 3.25 82.5 0.25 6.4 0.75 19.1 0.69 0.31
34 5.00 127 3.69 93.7 0.25 6.4 0.75 19.1 0.80 0.36
40 5.50 140 4.06 103 0.25 6.4 1.00 25.4 1.13 0.51
42 6.38 162 4.19 106 0.25 6.4 1.00 25.4 1.68 0.76
46 6.25 159 4.75 121 0.25 6.4 1.00 25.4 1.34 0.61
52 6.63 168 5.31 135 0.25 6.4 1.00 25.4 1.33 0.60
54 6.81 173 5.50 140 0.25 6.4 1.00 25.4 1.57 0.71
56 7.50 191 5.75 146 0.25 6.4 1.00 25.4 1.82 0.83
62 7.88 200 6.07 154 0.38 9.5 1.38 34.9 3.13 1.42
64 8.63 219 6.50 165 0.38 9.5 1.38 34.9 3.80 1.72
67 8.75 222 6.88 175 0.38 9.5 1.38 34.9 3.61 1.64
72 9.50 241 7.25 184 0.38 9.5 1.38 34.9 4.40 2.00
76 10.00 254 7.75 197 0.38 9.5 1.38 34.9 4.67 2.12
82 10.13 257 8.25 210 0.38 9.5 1.38 34.9 4.26 1.93
84 11.13 283 8.50 216 0.38 9.5 1.38 34.9 5.79 2.63
87 11.38 289 8.88 225 0.38 9.5 1.38 34.9 5.77 2.62
91 11.50 292 9.13 232 0.38 9.5 1.38 34.9 5.66 2.57
92 11.63 295 9.25 235 0.38 9.5 1.38 34.9 5.78 2.62
94 11.75 298 9.50 241 0.38 9.5 1.38 34.9 5.61 2.54
97 12.00 305 9.88 251 0.38 9.5 1.38 34.9 5.55 2.52
102 12.25 311 10.25 260 0.38 9.5 1.38 34.9 5.48 2.49
106 12.75 324 10.75 273 0.38 9.5 1.38 34.9 5.72 2.59
112 14.13 359 11.25 286 0.38 9.5 1.63 41.3 12.30 5.58
116 14.13 359 11.75 298 0.38 9.5 1.38 34.9 7.21 3.27
120 13.88 352 12.00 305 0.38 9.5 1.38 34.9 6.04 2.74
122 14.13 359 12.25 311 0.38 9.5 1.38 34.9 6.16 2.79
124 14.63 372 12.50 318 0.38 9.5 1.38 34.9 7.10 3.22
130 15.00 381 13.00 330 0.50 12.7 1.50 38.1 8.47 3.84
134 15.50 394 13.50 343 0.50 12.7 1.50 38.1 8.78 3.98
137 16.50 419 13.88 352 0.63 15.9 1.63 41.3 13.70 6.21
140 16.50 419 14.00 356 0.50 12.7 1.50 38.1 10.98 4.98
144 17.00 432 14.50 368 0.50 12.7 1.50 38.1 11.35 5.15
152 17.75 451 15.25 387 0.50 12.7 1.50 38.1 11.89 5.39
160 18.50 470 16.00 406 0.50 12.7 1.50 38.1 12.44 5.64
170 19.44 494 17.00 432 0.50 12.7 1.75 44.4 13.84 6.28
180 20.50 521 18.00 457 0.50 12.7 1.75 44.4 14.61 6.63
185 21.25 540 18.62 473 0.50 12.7 1.75 44.4 16.37 7.43
192 22.00 559 19.25 489 0.50 12.7 1.75 44.4 17.16 7.78
200 22.75 578 20.00 508 0.50 12.7 1.75 44.4 17.80 8.07
210 24.00 610 21.00 533 0.50 12.7 2.00 50.8 21.36 9.69
220 25.00 635 22.00 559 0.50 12.7 2.00 50.8 22.32 10.12
225 25.75 654 22.62 575 0.50 12.7 2.00 50.8 24.19 10.97
232 26.38 670 23.25 591 0.50 12.7 2.00 50.8 24.29 11.02
240 27.50 699 24.00 610 0.50 12.7 2.00 50.8 27.42 12.44
244 27.75 705 24.50 622 0.50 12.7 2.00 50.8 26.34 11.95
254 28.88 733 25.50 648 0.50 12.7 2.00 50.8 28.20 12.79
264 30.00 762 26.50 673 0.50 12.7 2.00 50.8 30.12 13.66
274 31.12 791 27.50 699 0.50 12.7 2.00 50.8 32.31 14.66
284 32.25 819 28.50 724 0.50 12.7 2.00 50.8 34.36 15.59
292 32.25 819 29.25 743 0.50 12.7 2.00 50.8 29.30 13.29
Flange material Service temperature Sealring material Sealring PTFE colour
Carbon steel -50º to +250º C Carbon steel / low alloy steel Blue
Stainless steel -50º to +250º C Duplex Yellow
Stainless steel -101º to +250º C 17/4-PH Orange
Stainless steel -196º to +100º C Austenitic (eg. 6Mo, 316) Red
SS/Nickel alloy/CS with inlay -196º to +250º C Nickel alloy (eg. 625, 718) Black
All high temp. steel >+250º C Suitable Uncoated
Techlok Sealrings
Sealring Size
Outside Diameter Inside Diameter Rib Thickness Overall Thickness Sealring Weight.
A B C D
ins mm ins mm ins mm ins mm Lbs Kg
4 1.00 25 0.50 12.7 0.13 3.2 0.38 9.5 0.03 0.01
5 1.09 28 0.63 15.9 0.13 3.2 0.38 9.5 0.03 0.01
7 1.38 35 0.91 23.0 0.13 3.2 0.38 9.5 0.04 0.02
11 1.75 44 1.13 28.6 0.13 3.2 0.38 9.5 0.06 0.03
13 2.38 60 1.50 38.1 0.13 3.2 0.38 9.5 0.11 0.05
14 2.63 67 1.61 40.9 0.25 6.4 0.56 14.3 0.28 0.13
16 2.75 70 1.87 47.4 0.25 6.4 0.63 15.9 0.28 0.13
20 3.25 83 2.06 52.4 0.25 6.4 0.75 19.1 0.45 0.20
23 3.50 89 2.38 60.3 0.25 6.4 0.75 19.1 0.48 0.22
25 4.00 102 2.67 67.9 0.25 6.4 0.75 19.1 0.62 0.28
27 4.25 108 3.06 77.8 0.25 6.4 0.75 19.1 0.62 0.28
31 4.50 114 3.25 82.5 0.25 6.4 0.75 19.1 0.69 0.31
34 5.00 127 3.69 93.7 0.25 6.4 0.75 19.1 0.80 0.36
40 5.50 140 4.06 103 0.25 6.4 1.00 25.4 1.13 0.51
42 6.38 162 4.19 106 0.25 6.4 1.00 25.4 1.68 0.76
46 6.25 159 4.75 121 0.25 6.4 1.00 25.4 1.34 0.61
52 6.63 168 5.31 135 0.25 6.4 1.00 25.4 1.33 0.60
54 6.81 173 5.50 140 0.25 6.4 1.00 25.4 1.57 0.71
56 7.50 191 5.75 146 0.25 6.4 1.00 25.4 1.82 0.83
62 7.88 200 6.07 154 0.38 9.5 1.38 34.9 3.13 1.42
64 8.63 219 6.50 165 0.38 9.5 1.38 34.9 3.80 1.72
67 8.75 222 6.88 175 0.38 9.5 1.38 34.9 3.61 1.64
72 9.50 241 7.25 184 0.38 9.5 1.38 34.9 4.40 2.00
76 10.00 254 7.75 197 0.38 9.5 1.38 34.9 4.67 2.12
82 10.13 257 8.25 210 0.38 9.5 1.38 34.9 4.26 1.93
84 11.13 283 8.50 216 0.38 9.5 1.38 34.9 5.79 2.63
87 11.38 289 8.88 225 0.38 9.5 1.38 34.9 5.77 2.62
91 11.50 292 9.13 232 0.38 9.5 1.38 34.9 5.66 2.57
92 11.63 295 9.25 235 0.38 9.5 1.38 34.9 5.78 2.62
94 11.75 298 9.50 241 0.38 9.5 1.38 34.9 5.61 2.54
97 12.00 305 9.88 251 0.38 9.5 1.38 34.9 5.55 2.52
102 12.25 311 10.25 260 0.38 9.5 1.38 34.9 5.48 2.49
106 12.75 324 10.75 273 0.38 9.5 1.38 34.9 5.72 2.59
112 14.13 359 11.25 286 0.38 9.5 1.63 41.3 12.30 5.58
116 14.13 359 11.75 298 0.38 9.5 1.38 34.9 7.21 3.27
120 13.88 352 12.00 305 0.38 9.5 1.38 34.9 6.04 2.74
122 14.13 359 12.25 311 0.38 9.5 1.38 34.9 6.16 2.79
124 14.63 372 12.50 318 0.38 9.5 1.38 34.9 7.10 3.22
130 15.00 381 13.00 330 0.50 12.7 1.50 38.1 8.47 3.84
134 15.50 394 13.50 343 0.50 12.7 1.50 38.1 8.78 3.98
137 16.50 419 13.88 352 0.63 15.9 1.63 41.3 13.70 6.21
140 16.50 419 14.00 356 0.50 12.7 1.50 38.1 10.98 4.98
144 17.00 432 14.50 368 0.50 12.7 1.50 38.1 11.35 5.15
152 17.75 451 15.25 387 0.50 12.7 1.50 38.1 11.89 5.39
160 18.50 470 16.00 406 0.50 12.7 1.50 38.1 12.44 5.64
170 19.44 494 17.00 432 0.50 12.7 1.75 44.4 13.84 6.28
180 20.50 521 18.00 457 0.50 12.7 1.75 44.4 14.61 6.63
185 21.25 540 18.62 473 0.50 12.7 1.75 44.4 16.37 7.43
192 22.00 559 19.25 489 0.50 12.7 1.75 44.4 17.16 7.78
200 22.75 578 20.00 508 0.50 12.7 1.75 44.4 17.80 8.07
210 24.00 610 21.00 533 0.50 12.7 2.00 50.8 21.36 9.69
220 25.00 635 22.00 559 0.50 12.7 2.00 50.8 22.32 10.12
225 25.75 654 22.62 575 0.50 12.7 2.00 50.8 24.19 10.97
232 26.38 670 23.25 591 0.50 12.7 2.00 50.8 24.29 11.02
240 27.50 699 24.00 610 0.50 12.7 2.00 50.8 27.42 12.44
244 27.75 705 24.50 622 0.50 12.7 2.00 50.8 26.34 11.95
254 28.88 733 25.50 648 0.50 12.7 2.00 50.8 28.20 12.79
264 30.00 762 26.50 673 0.50 12.7 2.00 50.8 30.12 13.66
274 31.12 791 27.50 699 0.50 12.7 2.00 50.8 32.31 14.66
284 32.25 819 28.50 724 0.50 12.7 2.00 50.8 34.36 15.59
292 32.25 819 29.25 743 0.50 12.7 2.00 50.8 29.30 13.29
Clamp coatings
Zinc rich, galvanising and epoxy coatings are available for clamp use and applied to recognised industry standards.Procedures and
specifications are available on request. Other specific coatings are available on request.
Test Rings (RIT)Vector has developed a means of testing a Techlok clamp connector joint in-situ
prior to, or in place of a line leak test to save time and ensure seal integrity.
There are two forms of test ring, an independent ring or an integral part of the
sealring.
The separate Reverse Integrity Test Rings (RIT) acts as a sealing carrier which eases
the installation process of the sealring during the assembly by testing the lips of the
sealring the wrong way hence producing a very onerous test on the seal. The
principle is illustrated below.
Materials
The materials used for the separate RIT rings are high strength carbon steel or 630
stainless.
The integral RIT sealrings will complement the base sealring material.
External pressure limits for Techlok sealrings
Tests and calculations indicate the external pressure capacity of standard Techlok
Sealrings (see Graph). The external pressure limit is dictated by the sealring geometry
and is therefore independent of the line pressure.
Two types of testing are shown (i.e. the integral RIT Ring and the independent RIT
Ring), and the pressure limit for both are relatively constant across the sealring range,
22
ReverseIntegrity
23
with the integral RIT Ring having the higher pressure capacity. Consequently a single
test pressure can be used for either type (see Table).
The test is carried out over a 15 minute period. This allows for any settlement of
oil and trapped air in the system. The small test volume means that even the smallest
leak will result in a pressure loss, ensuring a high integrity test.
The RIT test may also be used for gas testing.
TYPETEST PRESSURE
psi barg
INTEGRAL 2320 160
RIT RINGS 1160 80
Integral RIT / Techlok sealring ready for use Integral RIT / Techlok sealring showing test port
External pressure limits for Techlok sealrings
24
Solutionsfor demanding applications
Elbows and Tees
• Helps facilitate compact piping layouts
• Range of elbows, tees and cross pieces available
• Manufactured in forged steel with reinforced bend sections
Injection Quills
• Specialist sealring quills for inhibitor injection into pipelines
• allows controlled amounts of corrosion, scale and wax inhibitor to be released into
the flow
• tapered shaft ensures minimum disruption to the fluid flow
• installation at regular intervals along the pipeline allows even distribution of the
inhibitors
Techlok connectors are highly versatile and can be used inmany diverse applications. In addition there are severalother products completing the Techlok range, some ofwhich are illustrated on the following pages.
All fittings are available in a selection of materials such ascarbon, low alloy, stainless and Duplex steels, with a fullrange of nickel alloys for more specialised applications.
Vector International also offers an individual design servicefor special applications.
25
Cross-Over Spools
• A compact means of joining
one type of pipe connection
to another, or different pipe
sizes
• Manufactured from single-
piece forgings
• Fully compatible with the
standard range of Techlok hubs and sealrings, and is
interchangeable with standard seat profiles
• Connects Techlok hub to Techlok hub
• Connects Techlok hub to API flange/ANSI flange
• Connects Techlok hub to threaded union
Square Flanges
• A novel engineered
approach to flange design
• Standard weld prep for
universal piping
connections
• Reduced envelope for
piping bundles
• Incorporates a standard Techlok metal sealring
• Available in all piping materials
Thermowells
• Available to monitor flow conditions in pipelines
• High-pressure designs allow for thermocouples to be installed
while fully isolated from internal pressure
• Machined integrally with Techlok blind hubs – no welding
• Can be used in conjunction with Techlok forged tee components
to provide a high-integrity solution
• Robust design
Slimline Clamps
• Reduced envelop
dimensions creates even
more compact
connections
• Available in all sizes from
1” through to 24”
• Can be manufactured in carbon steel, stainless, duplex and super
duplex, as well as any other grade required
• A streamlined profile that can be used with ‘Pulling Blinds’ for
positioning of subsea equipment
API Hubs
• The full range of API 17D hub components and swivel ring flange
connections are available
Orifice Connectors
• The Techlok Orifice Connector is a matched hub pair with orifice
sealring and clampset
• Can be supplied for all pipe sizes and materials
• Hubs are accurately drilled and are provided with suitable outlet
connections for accurate flow measurement
• Special metering spools can be used, employing a separate orifice
plate and integral pressure tappings
• Simply connected into the pipe run using streamline bore Techlok
connectors
26
PowerLok Closure
• High integrity sealing for
pig launching and receiving
systems
• Smaller, lighter, reliable
closure for high pressure
pigging systems
• Uses high pressure, metal-
to-metal sealring and
clamp technology
• Provides weight and space savings
• Quick release design for easy and quick opening and closing
• No periodic tightening required
• Only one operator needed at installation
• Standard closures available from 6" to 36" (larger sizes available
on request)
3-Clamp Sets
• Available in 30” and larger
clamp sizes
• Ease of handling and
assembly
• Available together with
‘slides’ for easier make-up
and break-out
• Designed to client specification and all high-integrity applications
Weld Overlay/Inlay
• Carbon and low alloy steel
hubs can be furnished with
corrosion-resistant weld
overlay/ inlay to prolong hub
life in corrosive
environments such as water
injection lines
• The weld overlay/ inlay is applied in Alloy 625, and other high
grade alloys, to the critical seat area or, if needed, through the hub
bore
• Weld overlay/ inlay hubs should be used in conjunction with
suitable high strength stainless steel or nickel alloy sealrings
Twin Torque Gun
• Allows fast, controlled
tightening of two Techlok
bolts at once
• Ensures optimum and
equal tension on all bolts
• Both bolt pairs on a 6"
connector can be
tightened in just one
minute
• One gun fits a number of clamp sizes
Solutionsfor demanding applications
27
Easilift
• Creates safe manoeuvring of blind hubs and clamps offshore
• Enables quick and easy lifting, assembly and disassembly of connectors
• Sealring is retained in place during assembly
• Minimises overall downtime, saving time and money
EasiLift, by Vector International has been designed as theoptimum solution to the continuous challenge ofmanoeuvring Techlok blind hubs and clamps, safely andeasily (with health and safety in mind).
EasiLift enables safe assembly and disassembly of blind hubconnections. It is also capable of safely retaining thesealring during assembly. There are a minimised number ofmoving and removable parts to aid reliability and the frameitself is a rigid, welded structure, tested and certified tocomply with LOLER and PUWER regulations.
This system does not in any way replace any part of the existing assembly and
disassembly procedures for Techlok and is meant to be used only as a blind/clamp
handling system.
EasiLiftLifting Frame
28
Assemblyand disassembly procedure
Assembly Inspect components prior to assembly
Hub and sealring seating surfaces must be clean and free from foreign matter. Damage to hub seatsand seal lips is not acceptable, and should be rectifiedbefore assembly.
LubricateUsually sealrings are coated which acts as lubricant
during make-up. If required light oil or MoS2 spray can beused on hub sealing surface but not on sealring. Take carethat no solid particles are present in the lubricant.
Check sealring stand-offThe sealring should rock slightly against hub face.
Stand-off dimensions given below in inches.
Assemble componentsInstall sealring into the hubs, and assemble clamps
around the hubs. Lubricant applied to the hub/clampcontact area will aid assembly. The studbolts should befitted ensuring that spherically faced nuts locate intospherical seats of the clamps. Lubrication of nut faces andbolt threads is recommended.
Tighten bolts in uniform mannerBolting should be tightened to keep spacing between
clamp halves approximately equal. Clamp segments shouldbe shocked with suitable soft-faced hammer to aid assembly. Always re-tighten bolts after shocking to thetorque/preload values given on facing page.
Align hubsHubs should be aligned so that sealring can be installed
between hubs. DO NOT attempt to correct badly mis-aligned piping by clamping force alone; piping pulling forcesshould only be released when clamp is fully assembled.
Complete Techlok make up requires two conditions.
1) Hubs must be completely face to face with the rib ofthe sealring where standard hubs are used andcompletely face to face with each other where recessedhubs are used.
2) Bolts are made up to the correct torque.
Disassembly De-pressurise the line
Always check, never take it for granted that the line hasbeen de-pressurised. Proceed with caution in case seepagehas caused pressure to build up again.
Slacken nuts but do not remove the nuts from thebolts - then slacken clamp segments
Gradually run the nuts back along the bolts until justloose. If clamp segments remain bound onto hubs, thenBOTH segments must be slackened by hitting the inner faceof the clamp lugs with a suitable soft-faced hammer.
Repeat slackening procedureRe-loosen nuts and re-slacken BOTH clamp
segments until the maximum nut travel shown belowis reached. This should release sealring contact andany residual pressure will then be released through,with the joint.
Check clamps are slack and free to rotateand rock about hubs
Do not proceed until discharge ceases ensure thathubs are apart, sealring is free to move AND clampsare slack, free to rotate or rock.
NOTE - If pressure is still in the line, the sealringmight remain seated, making the join`t tight eventhough it is part dis-assembled. ONLY when allcomponents are loose and clamps are free to move candis-assembly be completed. If the components are notfree to move DO NOT CONTINUE - contact yoursupervisor.
Always ask yourself - what if ?…• What if, the connection is still under pressure, am I or
others in danger, and if so how?• What if, there is still gas or fluid in the line?• What if, the sling snaps?• What if, the load swings in my direction?• What if, the piping springs upon release? (Piping spring may
also prevent free rotation of clamps around the hubs).
29
Techlok designation uses “in” to denote nominal sizein inches as opposed to “GR” which denotescomparable products.All data contained herein may be subject to changewithout notice.
Clamp Standard Basic Bolt Preload Basic Bolt TorqueSize Bolt Dia (Note 1, 3) Lubricated µ=0.1 Notes 2X
(Note 1, 2, 3)ins Lbf KN Ft-lbs Nm ins mm
Standard Clamp Series1in 0.500 2844 12.7 17 23 4 0.2 511/2 in 0.625 4766 21.2 35 48 4, 5 0.2 62in 0.750 6516 29.0 55 75 4, 5 0.2 63in 0.750 7476 33.3 65 88 4, 5 0.3 84in 0.875 9946 44.2 100 136 4, 5 0.4 105in 1.000 13986 62.2 160 217 4, 5 0.6 146in 1.125 16032 71.3 210 285 4, 5 1.0 248in 1.250 20887 92.9 300 407 4, 5 1.1 27
Light Duty SeriesL14in 1.625 39727 177 700 949 4 1.3 33L16in 1.750 42084 187 800 1085 4 1.3 33L18in 1.875 54288 241 1100 1492 4 1.3 33L20in 2.000 58073 258 1250 1695 4 1.3 34L24in 2.250 74880 333 1800 2440 4 1.6 39
Heavy Duty SeriesH2in 0.875 9946 44.2 100 136 4, 5 0.2 6H3in 0.875 11931 53.1 120 163 4, 5 0.3 8H4in 1.000 12240 54.4 140 190 4, 5 0.4 11H8in 1.375 25599 114 390 529 4, 5 0.9 24H10in 1.625 39722 177 700 949 4, 5 1.2 32H12in 1.750 47340 211 900 1220 4, 5 1.5 37H14in 1.875 59208 263 1200 1627 4, 5 1.5 39H16in 2.250 83204 370 2000 2711 4, 5 1.6 40H18in 2.250 83204 370 2000 2711 4, 5 1.7 42H20in 2.250 89448 398 2150 2915 4, 5 1.7 43H22in 2.250 89448 398 2150 2915 4, 5 1.7 43H24in 2.250 93608 416 2250 3051 4, 5 1.8 45H26in 2.500 103590 461 2750 3728 4, 5 1.8 45
Notes:1. This is the basic minimum torque/preload value. Use for typically 900lb systems and below, blind closures and Stainless Steel clamps.2. Different friction coefficients will require the torque values to be adjusted. Check with Lubricant manufacturer. 3. Exceeding the stated torque/preload values may cause distortions in the Clamp/Hub. If these torques do not achieve correct make-up (i.e. unable to correct mis-alignment),
then seek assistance as other measures may be needed to assist with the assembly.4. Factor torque by 1.5 for mis-aligned piping and/or 1500lb systems and above. Suitable only for Carbon, Duplex and Low Alloy Steel Clamps with B7 or equivalent bolts.5. Factor torque by 2.0 for extreme mis-aligned piping and/or 2500lb (and 5000psi) systems and above. Suitable only for Low Alloy Steel Clamps with Grade B7 bolts or equivalent.
Sealring Nominal MinStand-off ‘Canted’‘Canted’ for Re-use
4 0.018 0.0065 0.018 0.0067 0.021 0.007
11 0.025 0.00912 0.025 0.00913 0.025 0.00914 0.024 0.00816 0.024 0.00920 0.023 0.01123 0.025 0.01325 0.028 0.01427 0.032 0.01631 0.031 0.01534 0.036 0.01840 0.039 0.01942 0.042 0.02146 0.050 0.02552 0.050 0.02556 0.053 0.02662 0.092 0.04664 0.096 0.04867 0.096 0.04872 0.099 0.05076 0.103 0.05282 0.107 0.05384 0.111 0.05587 0.114 0.05791 0.118 0.05992 0.118 0.05994 0.122 0.06197 0.129 0.065
102 0.129 0.065106 0.137 0.068112 0.144 0.072116 0.148 0.074120 0.155 0.078122 0.155 0.078124 0.152 0.076130 0.167 0.083134 0.167 0.083137 0.163 0.081140 0.167 0.083144 0.193 0.096152 0.189 0.095160 0.193 0.096170 0.200 0.100180 0.207 0.104185 0.219 0.109192 0.230 0.115200 0.234 0.117210 0.224 0.112220 0.254 0.127225 0.261 0.130232 0.272 0.136
Standard Clamp SeriesClamp GR Standard GR OptionalSize Sizes Sizes
1in 1GR
11/2 in 1.5GR
2in 2GR
3in 3GR
4in 4GR
5in 5GR E
6in 6GR F,XF
8in 8GR X8GR
Light Duty Clamp SeriesClamp GR Standard GR OptionalSize Sizes Sizes
L14in X14GR
L16in X16GR
L18in X18GR
L20in X20GR
L24in X24GR
Heavy Duty Clamp SeriesClamp GR Standard GR OptionalSize Sizes Sizes
H2in BH3in CH4in DH8in G XGH10in 10H X10HH12in 12M X12MH14in PH16in SH18inH20in UH22in VH24in WH26in Y
Torque/preload values for the Techlok Clamp Connector Sealring stand-off
Cross reference tables
in the field
Techlok
30
Training Services
We can offer comprehensive training courses for all relevant personnel at site prior
to their commencing work on the installation/assembly of any Vector product.
Satisfactory completion of the course leads to the award of a competency
certificate.
Site Services
Our Product Support Engineers are available on site at a time when your site
crews are ready to assemble and install piping runs. These engineers will assist in the
identification and repair of potential issues which may ultimately lead to a possible leak
at Hydro-test.
Remember prevention involves less cost than repairs, especially offshore.
Leak Reduction Initiative
We offer and provide a full and comprehensive on site service which delivers all
the benefits associated with both initiatives indicated above, and much more …
Our leak reduction initiative is designed to save you significant time and money
including minimising expensive offshore rework and potential lost production days.
The overall benefits of our leak reduction initiative more than justify the costs.
Vector International supply far more than just pipingproducts. In recent years we have become well known forour Product Support Services and our support for yourproject, no matter how large or small, never ends. Ourintention is for you to have a very successful ‘experience’working with us and our products.
These services are charged to you but in the medium termwill save you time, effort and money and will also preventfrustrations at installation for you and your staff.
It is a well known statistic that a number of mechanicaljoints, e.g. flanges, may show signs of leakage at start up(Hydro-test). With the input of our Product SupportTeams, this risk can be eliminated.
Typical damage caused through mis-handling
Keep all the information you need about the Techlok Clamp Connector at hand withthis useful mini CD, or copy the contents to your PC or laptop for instant access.
CD Contents
• Design principles
• Hub dimensions
• Clamp dimensions
• Sealrings dimensions and selection
•Pressure temperature ratings
• Weight comparisons
• Materials and size selection
• Installation procedure
• Case studies
• Picture gallery
Techlok Clamp Connector
• High performance, competitive price and
greater efficiency
• Low-weight: typically 75% weight
saving when compared to
conventional flanges
• Reduced bolting requirements -
just four bolts
• Radial bolting allows 360º
orientation around the pipe
• Quick and easy make-up and
break-out
• Easier fabrication, no bolt holes to align
• Techlok does not rely on complex bolting to
maintain seal integrity, but offers the strength of a
welded joint
• The preferred solution where space, weight and joint
integrity are critical
Clamp Connector
TechlokClamp Connector
Techlok
Vect
or In
tern
atio
nal
Tech
lok
Dim
ensio
nal r
efer
ence
cha
rt
Butt Weld HubBlind Hub
Clamp
Sealring
Lift flap to reveal your Techlok technical CD and dimensional reference chart
A four-bolt pipe connector typicallyweighing 75% less than a comparable
standard ANSI or API flange
Available in 1/2” to 26”
TechlokClamp Connector
The above international dialling codes may be subject to change when calling from within the country.
E-mail: info@vectorint.com Web: www.vectorint.com
AustraliaTel: +61 8 9471 1907
AmericasTel: +1 713 979 4444
MalaysiaTel: +603 238 00060
Middle EastTel: +971 435 56966
NetherlandsTel: +31 77 352 8200
NorwayTel: +47 32 20 93 00
UK – AberdeenTel: +44 1224 775 242
UK – BaglanTel: +44 1639 822 555
worldwide presence
This brochure is for information only. For more detailed information please view our website at www.vectorint.com. All details and measurements are correct at time of print.
Despite every effort, the information contained in this brochure may not be comprehensive, it may not be accurate, up to date or applicable to the circumstances of any particular application or enquiry. We cannot accept any liability for anyinaccuracies or omissions or changes which may take place to product technical specification due to third parties. Vector International does not accept liability for any direct, indirect, special, consequential or other losses or damages of
whatsoever kind arising out of access to, or the use of this brochure or any information contained in it.
Send for your desktop model now and take the first step to greater reliability, email techlok@vectorint.com
FREETECHLOK
Vect
or In
tern
atio
nal T
echl
ok 0
8/07
10M
KIT
prin
ted
in t
he U
K
Other Vector products