Post on 21-Dec-2015
UNIO SA – ROMANIA
MANUFACTURER AND SUPPLIER OF CONVEYING
EQUIPMENT ON FLOW AND TECHNOLOGICAL EQUIPMENT
SINCE 1911
Hersteller und Lieferant von Forderanlagen und technologische Ausrustungen
GENERAL PRESENTATION
Adress: UNIO SA 35, Lucian Blaga Blvd.440227 – SATU MARE, ROMANIATel: +40 261 766120Fax: +40 261 761735Email: marketing@unio.rowww.unio.ro
Location: UNIO SA is located in SATU MARE, a 120 000 inhabitants town, situated in North-West of Romania, at 10 Km from Hungarian border and at 60 Km from M3 Highway
SINCE 1911
UNIO SA ist in Satu Mare, in Stadt sind 120 000 Einwohner, liegt in Nord-West Rumanien, 10 km entfernt von ungarische Grenze und 60 km entfernt von M3 Autobahn aus Ungarn.
SINCE 1911
UNIO – General informationCapital/ Kapital: 7,5 millions USD Established/ Gegrundungsjahr: 1911, private since 2000Employees/ Mitarbeiter : 920Total surface/ Ges Oberflache: 18 ha Production surface/ Prod Oberflache: 6 ha Crane/ Kran ( max): 50 tonsMilling/ Fraesen ( max): 14000x3000x2500 mmTurning/ Drehen – orizontal (max):dia 2100x8000 mm -vertical (max): dia 5000x2500 mm
Stress relieve/ Spannungsarm gluchen (max): 11000x3300x3000 mmTurnover/ Umsatz (2012): 20 millions Euro
Spur Gears/ Zahnrader: Dia 1200 mm, modul 25, precision class ISO 5-6
SINCE 1911
TECHNOLOGICAL
•Engineering and service/ Konstruktion
•Cutting and bending/ Schneiden und Biegen
CAPACITIES
•Forge, foundry and heat treatment/ Schmiederei, Giesserei und Warmebehandlung
•Mechanical processing/ Mechanische Bearbeitung
•Welding/ Schweissen•Destructive and non-destructive testing/ DT und NDT Prufung
•Assembling and trial assembly testing/ Montage und Prufmontage
•Control and certifications/ Kontrolle und Zertifizierung
Technological capacitiesSince 1911
Material cutting/ Material schneidenComputer controlled oxi-gas cutting machines/ Computer gesteuerte Brennen mit GasCarbon steel plates
Computer controlled plasma cutting machines/ Computer gesteuerte plasma SchneidmaschineStainless steel
Sawing machines / SaegenRound bars , tubes and pipes
Thickness ( max.): 200 mmLength : 12 000 mmWidth: 2500 mm
Thickness ( max.): 20 mmLength : 12 000 mmWidth: 2500 mm
Diameter ( max.) : 400 mmLength : 12 000 mm
Forging / SchmiedenOpen die die:Rings :up to 1200mm diameterShafts: up to Dia. 450 mmand 4000 mm lenght
Material calandering/ WalzenThree roll Calander :Steel PlatesThickness ( max.) : 22 mm at 3 000 mm widthDiameter (max): 6000 mm
Material bending/ Biegen600 tons Bending machine :Steel PlatesThickness ( max.) : 12 mm at 4 000 mm width
Technological capacitiesCertificates and authorizations:
Since 1911
•AD 2000- Merkblatt HP0, TRD 201 and ISO3834-2 ( TUV)
Welding / Schweissen:
Welding processes/ Schweissverfahren: 111, 135, 136 –MIG, MAG
Authorized welders/ Schweißer mit Zulassung : 30 ( GL, SLV, TUV)
International Welding Engineers: 3
•DIN 18800- 7:2002-09 Klasse E (SLV)
•Aproval for welding – Germanischer Lloyd Rules(GL)
•3 INTERNATIONAL WELDERS ENGINEERS
•50 TUV, GL and SLV authorized welders
Since 1911
Technological capacities
Mechanical processing : turning/ DrehenVertical turning
Diameter: max. 5000 mmHeight: max 2800 mm
Since 1911
Technological capacities
Mechanical processing : turning (Drehen)Horizontal turning ( CNC)
Diameter: max. 2100 mmLenght: max 8000 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC) Fresen und Bohren
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Mechanical processing : Milling and boringMachining centers ( CNC)
X: max 14000 mmZ: max 3800 mmY : max 2500 mm
Since 1911
Technological capacities
Gear cutting - VerzahnungSpur Gear cutting machines
Diameter :max. 5000 mmModul: max.42 mmPrecision class: 9-11
Since 1911
Technological
Gear grinding (Schleifen)
Spur gear grinding machines ( Niles):
Diameter: max. 1200 mmModul: max. 24 mmPrecision class: 4-5
capacities
Since 1911
Technological capacities
Heat treatment (Waermebehandlung)Stress relieving – spannungsarm
GluehenHardening, Annealing, Induction hardening
Dimensions : 3700 x 3500 x 11000 mm
Since 1911
Technological capacities
Assembling works: (Montage)
Mechanical assembling:On assembling platforms, max. crane capacity 50 Tons
Since 1911
Technological capacities
Surface protection:- Sandblasting (Sandstrahung)-Painting (Lackierung)-Galvanizing, Browning
Since 1911
Technological capacities
Surface protection:- Sandblasting-Painting-Galvanizing, Browning
Since 1911
Quality assurance
Control possibilities
Nondestructive testing:Ultrasonic testingMagnetic particle inspectionLiquid penetrant testingX- rays testing
Since 1911
Quality assurance
Control possibilities
Hardness tests: (Haertepruefung)Brinell Vickers Rockwell Microhardness
Destructive tests:Stress tests Impact tests Chemical tests Metallographic tests
StresstestsKerbschlagbiegeversuchChemische PrüfungenMetallografische Tests
Zerstörerische Prüfung
Since 1911 Quality assurance
Control possibilities (3D-Messmaschienen)Computer Measuring Machines (CMM) CMM Ghibli Trax – Brown&Sharpe – DTable dimensions:2600x1200x1000 mm
Precision: 0.0025 mm
Since 1911
Quality assurance (3D-Messmaschiene)
Control possibilitiesComputer Measuring Machines (CMM): CMM Stiefelmeyer
Table dimensions:6000x3000x2000 mmPrecision: 0.0025 mm
Since 1911
Quality assurance
Certificates and Authorisations
ISO 9001:2001 ISO 14001:2005 ISO 18001:2008
Conveying equipment on flowApron conveyers-for automotive assembling lines
Foerderanlagen fuer Automobileindustrie
Conveying equipment on flowWagons for lime transport in cement factories area
Wagen fuer Zementfabrik
Since 1911 Conveying equipment on flow
MINE LOCOMOTIVES AND LOADERS
Lokomotive und Lademaschienen fuer Bergbau
Material processing equipmentOven( Dia. 4800mm) for nonferrous metals processing
Ofen fuer Nichteisenmetalle
Material processing equipmentBucket wheel( Dia. 14.0 m) for bulk material transport
Schaufelradbagger (Durchmesser 14,0 m) für Schüttgut Transport
Since 1911
Technological equipment andindustrial projects
Tehnologischesausruestungen Zulieferant
•
•
•
•
Equipment for off-shore projects and maritime
Transfer systems for metallurgy
Equipment for assembling lines for automotive
Equipment for plastic technology
Mechanical transmissions
industry
industry•
•
Fuer Walzindustrie, Schiffbauindustrie, Automobileindustrie, ……
Equipment for offshore projects90 tons winch frame – bolted in parts for transportSchiffbau - 90 Tonnen Windenbock - auch in Teilen für den Transport verschraubt
Equipment for offshore projects –Turned GROOVED DRUMS up to 2.1 m dia.
Trommel mit Rillen - Drehmaschienen
Equipment for offshore projectsHoisting system for technologic robots- 200 tons
Fully assembled in UNIO
Hebelausruestung
Technological equipment and industrial projectsEquipment for maritime industry – Draghead – 65 tons
3 parts cutted fortransport
65 To – Baggerkopf fuer Schiff
Technological equipment and industrial projects
Equipment for maritime industry – Draghead – 40 tons
Technological equipment and industrial projects
Equipment for maritime industry – Draghead – 60 tons
Technological equipment and industrial projects
Equipment for maritime industry – Bow conection– 40 tons
Technological equipment and industrial projectsEquipment for maritime industry - Gantries
Kraene fuer Schiffe
Technological equipment and industrial projectsEquipment for maritime industry - Overflows
Stahlkonstruktion fuer Schiffe
Since 1911
Technological equipment and
industrial projects• Transfer systems for metallurgy - Fördersysteme für die Metallurgie
Since 1911
Technological equipment andindustrial projects
• Equipment for assembling lines for automotive industry
Ausrüstung für Montagelinien für die Automobilindustrie
Technological equipment and industrial projects
Equipment for assembling lines for automotive industry