Post on 03-Oct-2014
WALL SAWShydraulicConvincing advantages
• Power
• Reliability
• Service
The same feed motor is used for rotation and travel
Swivel arm with belt drive
User-friendly:Y-carriage guide with fine adjustment
DZ-S2Max. cutting depth 510 mm
WZMax. cutting depth 710 mm
• The cost-effective entry-level model• Up to dia. 1200 mm / 20 kW
The first wall saw with cast aluminium frame worldwide. A faithful companion for daily use, proven in practice countless times.
• Compatible, suitable for all existing V-rails• Up to dia. 1600 mm / 25 kW output
Advanced technology such as high-strength aluminium alloy parts, gear swivel arm and guide rollers make this wall saw our reference product.
Details / features
Quickinfo
Cutting depth 510 mm
Max. saw blade dia. 1200 mm
Free detachable dia. 900 mm
Weight (incl. 2 feed motors and drive motor)
34 kg
High performance with low weight thanks to state-of-the-art technology
Economical in operation and service and. Trans-mission swivel arm with quick-release flange.
Wall saw head is quick and easy to install
Details / features
Quickinfo
Cutting depth 710 mm
Max. saw blade dia. 1600 mm
Free detachable dia. 825 mm
Weight (incl. 2 feed motors and drive motor)
29 kg
FZ-2STMax. cutting depth 710 mm
FZ-4SMax. cutting depth 1005 mm
The same feed motor is used for rotation and travel
Proven:belt drive with quick-release flange
User-friendly:Y-carriage guide with fine adjustment
Details / features
Main motor with quick-release flange
Low-maintenance:Transmission arm with quick-release flange
User-friendly:Y-carriage guide with fine adjustment
Details / features
• Ingenious quick-release flange for simple blade change and flush cutting
• Unsurpassed cutting performance up to dia. 1600 mm / 30 kW output
Proven and economical. The best-selling TYROLIT Hydrostress wall saw.
• Ingenious quick-release flange for simple blade change and flush cutting
• Unsurpassed cutting performance up to dia. 2200 mm / 40 kW output
This wall saw head is the right choice where maximum performance is required. Robust design ensures high cutting accuracy even with large loads.
Quickinfo
Cutting depth 710 mm
Max. saw blade dia. 1600 mm
Free detachable dia. 1025 mm
Weight (incl. 2 feed motors and drive motor)
42 kg
Quickinfo
Cutting depth 1005 mm
Max. saw blade dia. 2200 mm
Free detachable dia. 1025 mm
Weight (incl. 2 feed motors and drive motor)
47 kg
PPH20Output 20 kW
CR-LSOutput 25 kW
• Robust and reliable• Service-friendly thanks to plastic cover
In conjunction with the DZ-S2 wall saw the PPH20** drive forms the perfect entry-level system.
Ergonomically arranged control elements
Electrical box with certified standard components
Service-friendly thanks to plastic cover
Details / features
• The lightest 25 kW drive • Field-proven and cost-effective
Our proven drive in terms of price and reliability.
Ergonomically arranged control elements
Simple, clean working through protected, flat head couplings
Controllable water flow
Details / features
Quickinfo
Motor capacity 20 / 15 kW
Pressure stages 2
Current (400 V) 32 A
Weight 140 kg
Quickinfo
Motor capacity 25 kW
Pressure stages 1
Current (400 V) 40 A
Weight 128 kg
PPH20Output 20 kW
Simple operation:Self-explanatory labels
Direction of rotation switch, secondary terminals, hour counter
Service-friendly:The plastic cover can be removed without tools
Details / features
• The 20 kW drive for day-to-day use• 4 stages, constant power
Now in pole position among TYROLIT Hydrostress. Wide range of applications and low-maintenance.
Quickinfo
Motor capacity 20 kW
Pressure stages 4
Current (400 V) 32 A
Weight 135 kg
PPH20RROutput 20 kW
Convenient through radio remote control
Direction of rotation switch, secondary terminals, hour counter
Service-friendly:The plastic cover can be removed without tools
Details / features
• Convenience through radio remote control• Sawing between dia. 600 mm and 1200 mm without
motor change
The classic drive, unbeatable in price and performance. Reliable and user-friendly.
Quickinfo
Motor capacity 20 kW
Pressure stages 4
Current (400 V) 32 A
Weight 160 kg
Perfect control:Remote control with 5 m cable
Minimum starting current:Twin motor design
Direction of rotation switch, hour counter, emergency stop, secondary terminals
AD-S4 RCOutput 29 kW
Details / features
• High continuous power• Variable current consumption 44 A or 32 A
The proven and versatile drive.
Quickinfo
Motor capacity 29 kW
Pressure stages 4
Current (400 V) 44 A
Weight 210 kg
PPH25RROutput 25 kW
Convenient through radio remote control
Economical: 4-stage switch for optimum speed at the diamond tool
Service-friendly:The plastic cover can be removed without tools
Details / features
• High continuous power• Convenient through radio remote control
The drive with high performance for daily use.
Quickinfo
Motor capacity 25 kW
Pressure stages 4
Current (400 V) 42 A
Weight 170 kg
Convenient through radio remote control
Direction of rotation switch, hour counter, emergency stop, secondary terminals
Service-friendly:The plastic cover can be removed without tools
CSF-50
The key to corner sawing:Flush sawing with diamond chain
Fitted in seconds:Combined quick release fastener with grip
Simple handling: Proven quick-release fitting at the saw head
Details / features
• For corners without overcutting• Ideal for small openings• O-ring chain for long service life
Shows the real professional. The valuable accessory that can make all the difference. Overcut-free, clean corners up to 50 cm wall thickness.
PPH40RROutput 40 kW
Details / features
• Maximum performance for any application• Very versatile • A strong team in conjunction with wall saw FZ-4S
The drive unit with unbeatable performance. For tasks with high power requirements and special applications.
Quickinfo
Motor capacity 40 kW
Pressure stages 4
Current (400 V) 60 A
Weight 238 kg
System-combinations
Blade guardNormal and flush cutting
• The all-in-one blade guard• For saw blade dia. 800 mm / 1000 mm / 1200 mm• Simple, robust, durable• Field-proven and safe
Diamond tools
These are standard recommendations for hydraulic wall saw systems. TYROLIT technicians can provide advice for special applications and working conditions.
WSL WSM WSH
Robust swivel unit with stop
Hand-friendly clamping handle
Simple, functional clamping device
For normal and flush cutting
RecommendationPossible
CR-LS
PPH20***
PPH20RR***
PPH40RR***
AD-S4 RC
PPH25RR***
DZ-S2 WZ FZ-2ST FZ-4S CSF-50PPH20**
Rail system
Type VSVery robust steel rail, suitable for applications up to 50 kW. Can be extended and used with all rail trestles.
Type VASLightweight aluminium rail suitable for applications up to 25 kW. Steel guides and durable, exchangeable gear teeth. Extendable.
VAS
VS
Rails VAS VS
Approved power 25 kW 50 kW
Weight at 1100 mm 9.3 kg 13.8 kg
Material Aluminium/steel Steel
Extendable • •
Length
825 mm 700 mm
1100 mm 1100 mm
1375 mm 1400 mm
1650 mm 1800 mm
1925 mm 2200 mm
2200 mm -
Compatible wall saws
DZ-S2 • •
WZ • •
FZ-2ST • •
FZ-4S •
Rail trestles
V-rail trestle, steel •
V-rail trestle, aluminium • •
V-swivel rail trestle • •
V-rotating rail trestle • •
• Recommendation
Extension piece, quick assembly, rigid connection
Rail stopper for safe working
V-rotating rail trestle, 360° rotatable, step cut
Accessories
V-rail trestlealuminium, flat
V-rail trestlesteel
V-swivel rail trestle45° - 135°
30 kW
20 kW
10 kW
40 kW
- abrasive abrasive +
WSL
WSM
WSHDrive Power PPH20** 20 kW CR-LS 25 kWPPH20*** 20 kWPPH20RR*** 20 kWPPH25*** 25 kW AD-S4 RC 30 kW PPH40RR*** 40 kW
Technical data
Wall saws DZ-S2 WZ FZ-2ST FZ-4S
Saw blades
Cutting depth 510 mm (with 1200 mm dia.)
710 mm (with 1600 mm dia.)
710 mm (with 1600 mm dia.)
1005 mm (with 2200 mm dia.)
Max. saw blade dia. 1200 mm 1600 mm 1600 mm 2200 mm
Free detachable dia. 900 mm 825 mm 1025 mm 1025 mm
Holder dia. 60 mm 60 mm 60 mm 60 mm
Blade flange mounting at wall saw central screw quick-release flange quick-release flange quick-release flange
Saw blade mounting (flush cutting)
6 countersunk head screws reference circle 130 mm
6 countersunk head screws reference circle 130 mm
6 countersunk head screws reference circle 130 mm
6 countersunk head screws reference circle 130 mm
Blade cover mounting on blade flange 1 hexagonal bolt 2 hexagonal bolts 2 hexagonal bolts 2 hexagonal bolts
Blade flange dia 165 mm 150 mm 150 mm 150 mm
Design
Rotatable swivel arm 360° 360° 360° 360°
Power transmission in swivel arm toothed belt gear wheel toothed belt gear wheel
Blade drive transmission ratio 1:2 1:2,6 1:2,5 1:3
Operation
Carrying handles 2 2, combined with locking function
2 2
Wall saw head weight - incl. drive motor and 2 feed motors- without drive motor 34 kg
27 kg29 kg24 kg
42 kg34 kg
47 kg39 kg
Rail mounting
Carriage guide Bronce Prisma rollers Bronce Prisma Bronce Prisma
Blade guard
3-part for dia. 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm
3-part flush for dia. 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm 800 / 1000 / 1200 mm
2-part for dia. 1600 mm 1600 mm 1600 / 2200 mm
Hydraulic motors / quick-change mechanism
Hydraulic motors GR2 • • • +
Hydraulic motors GR3 • •
• Recommendation+ Possible
Subject to technical modifications
Drives PPH20** CR-LS PPH20*** PPH20RR*** PPH25RR*** AD-S4 RC PPH40RR***
Electric motor
Power 20 kW 25 kW 20 kW 20 kW 25 kW 29 kW 40 kW
Hydraulic system
2 feed circuits gear pump radial piston pump radial piston pump radial piston pump radial piston pump gear pump radial piston pump
Main circuit dual gear pump gear pump triple gear pump triple gear pump triple gear pump triple gear pump triple gear pump
Pressure stages 2 1 4 4 4 4 4
Power
Stage 1 33 l/min at 260 bar 45 l/min at 230 bar 33 l/min at 260 bar 33 l/min at 260 bar 45 l/min at 230 bar 45 l/min at 255 bar 65 l/min at 250 bar
Stage 2 40 l/min at 210 bar 40 l/min at 215 bar 40 l/min at 215 bar 50 l/min at 200 bar 55 l/min at 210 bar 75 l/min at 220 bar
Stage 3 50 l/min at 180 bar 50 l/min at 180 bar 60 l/min at 170 bar 63 l/min at 180 bar 80 l/min at 200 bar
Stage 4 60 l/min at 150 bar 60 l/min at 150 bar 70 l/min at 140 bar 73 l/min at 155 bar 90 l/min at 180 bar
Electrical system
Electric motor water-cooled
1 1 1 1 2 (twin) 2 (twin)
Air-cooled electric motor
1
Voltage 220 V / 380 V / 400 V / 460 V
380 V / 400 V / 460 V
200 V / 230 V / 380 V / 400 V / 460 V
200 V / 230 V / 320 V / 400 V / 460 V
380 V / 400 V 200 V / 400 V / 460 V
380 V / 400 V / 460 V / 575 V
Frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz
Current consumption (400 V)
32 A 42 A 32 A 32 A 42 A 44 A 60 A
Secondary connections (230 V) Fl-protected
2 x 2 x 2 x 2 x 2 x
Phase inversion multiturn pole plug direction of rotation switch
direction of rotation switch
direction of rotation switch
direction of rotation switch
direction of rotation switch
direction of rotation switch
Remote control radio radio cable radio
Remote control functions
all functions all functions on / off main motor feed motors
all functions
Dimensions
Length (without handles) 561 mm 620 mm 650 mm 650 mm 650 mm 720 mm 710 mm
Length 720 mm 730 mm 760 mm 760 mm 760 mm 820 mm 820 mm
Width 475 mm 540 mm 550 mm 550 mm 550 mm 570 mm 560 mm
Height (without handles) 976 mm 750 mm 730 mm 730 mm 730 mm 870 mm 830 mm
Height 988 mm 1160 mm 1140 mm 1140 mm 1140 mm 1270 mm 1260 mm
Weight 140 kg 128 kg 135 kg 160 kg 170 kg 210 kg 238 kg
Subject to technical modifications
FO_0
704_
210x
297_
EN_W
ands
aege
n