Two Peg Test

Post on 27-May-2017

212 views 0 download

Transcript of Two Peg Test

TWO PEG TEST

LOCATION• At the parking lot

behind the cabin area.ObjectivesTo determine wheather the levelling bubble and telescope line of sight are parallel.

PROCEDURES

1. Indentified a location to stand up a level.

2. Marked this level as point C.

3. Measured 30m at both side of the level to stand up staf.

4. After hat, mark the staf as point A and point B.

5. Take data at point A and point B.

6. Measured 10m straight line from point A as point D.

7. Moved the level to point D.

8.Then, point A and point B automatically becoming point A’ and point B’.

OBSERVATION DATA30 m

Reading staff B Reading staff A Height difference = m

First set up 1.370 1.288 0.082

Reading staff B Reading staff A Height difference = m’

Second set up 1.255 1.116 0.057

OBSERVATION DATA60 m

Reading staff B Reading staff A Height difference = m

First set up 1.430 1.260 0.170

Reading staff B Reading staff A Height difference = m’

Second set up 1.542 1.395 0.147

Difference (m-m’) 30 m 60 m

0.025 0.023