Post on 15-Oct-2020
TRANSNET
www.transnet.co.nz
December 2014 | January 2015
HV JUICE
100% NZ OWNED
TAPPAT – Link Box & Link Pillars
NEW AGENCY – Inertia Engineering
MV Switchgear, LineBOSS™ ABS
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
400A Raychem RSES Screened Separable Elbows - Type “B”Raychem RSES screened, separable elbow connectors are designed to connect single and three core polymeric cables to medium-voltage gas insulated switchgear and other equipment using CENELEC bushings Type “B” specified for 400 A up to 36 kV.
Made of a highly modified silicone rubber and protected by a thin-walled outer conductive screen connected to earth, RSES elbow connectors are equally suited for indoor and outdoor installation. Supporting a wide application range, the design incorporates one body and two stress cone adapters to cover all cross-sections from 50 to 300 mm2. The overall and cut-back dimensions are designed to take up minimum space in the terminal box. RSES elbow connectors are equipped with a capacitive test point for determining whether the circuit is energised. This test point is protected by a conductive cap.
After cable preparation and lubrication, the stress control adapter is simply slid into place, followed by the screened connector body. These two components can be installed under virtually any conditions.
A separable mounting system ensures easy installation of the connector onto the bushing.
All kits include high-performance multi-range mechanical lugs matching the design of the RSES elbow connector.
FEATURES
• The insulation of the connector is made of a highly modified silicone rubber characterised by high tracking resistance, elongation at break and non-flammability.
• A thin-walled screen is permanently bonded onto the insulation and protects the connection system against accidental contact.
• The screened connector need not be removed for oversheath testing.
• The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which includes BS, VDE and other international specifications.
• Design fits 400 A bushings (interface “B”) as specified by EN 50180 and EN 50181.
• The wide application range covers cable cross-sections from 50 to 300 mm2.
• Conductor connection with mechanical lugs, designed to accept aluminium and copper conductors.
• Easily accessible capacitive test point.• Few accessories required for system test.• Complete kit including lugs facilitates installation and
storage.
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
New Agency!!! – Inertia MV Switchgear
The LineBOSS™ Sidebreak switch is the most robust, yet elegant sidebreak switch in the market today.
Every LineBOSS™ component brings meaningful operator benefits for years to come. Features such as 1/4 inch steel phase base, stainless steel to brass bearings, silver plated copper reverse loop contacts and busbar blades mean efficient and smooth operations over a very long life; even in hostile environments where dust, humidity, corrosives and other industrial or natural contaminants play havoc with most. You’ll be amazed with how much switch you can get for your money from Inertia Engineering.
STANDARD FEATURES
• Resilient, higher BIL silicone rubber isulators
• Reverse loop silver plated copper jaw contacts
• Maintenance free stainless steel/brass bearings
• Unitised construction: aluminium, steel or fibreglass
• Factory adjusted, ready to mount
• Meets all applicable NEMA and ANSI standards
• All ferrous components are hot dip galvanised
• Tinned copper terminal pads
NEWAGENCY
inertia engineering usa made
, mv switchge
ar
For more information on stocked items or how to customise to your requirements please contact customer service or your local TransNet rep.
STANDARD CONFIGURATIONS
• 11kV, 22kV & 33kV models available
• Horizontal (upright)
• Horizontal (centre mount)
• Vertical (tiered outboard)
• Vertical (phase over phase)
• Horizontal (underarm)
• Riser
• Delta (pole top)
LOAD BREAK DEVICES (customise for your requirements)
• Arc Horns
• Quickbreak Whip Attachments
• Arc Chute Load Break
• AmpRupter Load Break
• AmpVac Load Break
ACCC Designation D06
Loadability factor 1.22 at 25°C
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
IPC Service Branch Joint Up To 300mm² Main, 35mm² Tap
INDIVIDUAL CONNECTORS
• Each phase is connected independently of the others to ensure worker safety
• Connectors allow for up to two tails from each phase
• Fully shrouded connector body removes risk of accidental contact
• Shear head bolts – no need for torque tools
• IPC – guarantees connection integrity
• No exposed live metal parts
• Safer live working situations
INSULATION PIERCING TECHNOLOGY
• No need to strip live cables
• Fast, safe and simple to apply
• Connection is made & head shears off once correct torque reached
KITS
• Two kits cover main cable 70-300mm²
• Up to two tails of 10-35mm² from each phase
LVSB JOINTS, FASTER & SAFER, FOR LIVE WORKING
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
+2-0
Inside hole recessfor LID assembly
386 dia
434 Dia O/side
700
600 i/Dia
80
434 Dia O/side
600 i/Dia
80
614 o/Dia
You Asked, We delivered! We were asked recently to come up with a cost effective prouduct that was bigger than the standard TUDS325S pit yet able to keep the same footprint.
After some careful planning and testing we are happy to introduce the TUDS325L pit. A larger pit offering more space to house components underground while at the same time fitting the existing lid and retaining the same ground level footprint as the standard pit. We call that success!
NEW! – Large TUDS Pit
Corrosion is a pervasive, but largely invisible problem in the electrical industry. The root cause of electrical equipment failures that lead to downtime is often due to corrosion. The onset of devastating corrosion can occur while the equipment is in shipment, storage and during normal operation in both indoor and outdoor environments. Corrosion is most commonly initiated in atmospheres with high himidity, condensation, or traces of aggressive pollutants such as sulfides, chlorides and ammonia. The results are expensive failures ranging from intermittent performance to complete failure of critical components. Zerust® corrosion inhibiting products are a cost effective way to protect electrical and electronic components and equipment from the destructive effects of corrosion. Zerust® Vapor Capsules are easy-to-use, portable capsules that emit powerful corrosion inhibiting molecules into an enclosure that settle on metal surfaces and protect them from corrosion. Zerust® Vapor Capsules are particularly suitable for electrical gear as they leave no residue on contact surfaces.
BENEFITS OF ZERUST®
• Reduce corrosion incidences• Improve equipment reliability• Reduce need for inspection & rework• Save money & resources• Comes with Zerust® global onsite support
FEATURES
• Proven corrosion protection• Easy-to-use• Non-toxic & odourless• Fits restricted spaces• Does not leave residue on electrical
contact surfaces
Without Zerust®With Zerust®
Product # TUDS325L
ZERUST® Corrosion Solutions
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
Tappat by TE – Link Boxes & Link Pillars
TAPPAT 4 WAY LINK BOXDesigned collaboratively with our utility customers, the Tappat underground link box is perfect for new installations or as a like for like replacement for existing bitumen filled link boxes at the end of their asset life.
Available untailed or pre-tailed with flexible copper tails ready to joint to existing cables on site. It is available in 2way or 4way configuration with 600amp CAMLOK links included.
KEY FEATURES
• Complete LV switching and Isolating system
• Safe and economical to install & operate
• Fully submersible
• Aesthetically pleasing in ground installation
• Eliminates above ground consent issues
• Range taking up to 300mm² mains cable
• Fully insulated CAMLOK link
• Pit and lid meet B125 & EN124 standards, lid can hold 45Nm/mm2
• Tested to 600 Amps
TAPPAT 3 WAY LINK PILLARThis 3-Way Open/Switching Point Link Pillar is predomi-nately used for standard link and isolation procedures and load balancing. The TE Link Pillar is designed to be used in a 3 phase, 400 Volt, 50 Hz MEN distribution system. To connect/disconnect or parallel LV feeders.
KEY FEATURES
• Tinned brass connections eliminate the possibility of corrosion
• Touch safe
• Ease of installation
• All Tappat products come with an installation in-struction and component list
• 185mm2 to 300mm2 mains
• Up to 50mm2 service or street light connections
• Tested to 600 Amps
*2 way link pillar also available
www.transnet.co.nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz
Ph 0800 442 182 +64 9 274 3340sales@transnet .co .nz www.transnet.co.nz
G99 enables inspection of entire glove due to full inflation
Rolling gloves to inflate and inspect only enables lower glove inspection
Salisbury Glove Inflator/TesterFor the ultimate in fast, simple and effective onsite glove testing......you need the Salisbury G99 Glove Inflator.
The G99 is a simple, easy to use, portable glove inflator. The G99 provides a quality means of inspecting gloves in the field.
The glove is secured to the inflator using a nylon strap and fastened with a hook and pile closure. Inflation is accomplished by pumping the bellows of the inflator against any surface.
Using the Salisbury G99 glove inflator enables a full glove inspection by inflating the entire glove not only the lower glove as is the case with the roll to inflate technique.
NOTE : gloves should be expanded no more than 1.5 times their normal size for Type I, and 1.25 times normal for Type II SALCOR®.
*Contact customer service for hot introductory pricing, valid until 31/01/15.
BENEFITS
• Fast
• Easy to use
• Effective inflation of entire glove
• Suitable for all Salisbury gloves (adaptor required for smaller gloves and Class 00 & 0)
• Comes in handy carry bag
• Will not damage the glove cuff
HOT DEAL!
Wellington
18 Sydney StreetPetoneWellingtonNEW ZEALAND Ph 04 576 2530Fax 04 576 0040PO Box 39 383 Howick, Auckland
TransNet New Zealand LtdAuckland
20 Neilpark DriveEast TamakiAucklandNEW ZEALAND Ph 0800 442 182 Fax 0800 442 183PO Box 39 383 Howick, Auckland
TransNet Equipment Pty LtdPerth
Unit 20, 8 Hurley StreetCanning Vale WA 6155PerthAUSTRALIA Ph +61 8 9256 3417Fax +61 8 9256 3917PO Box 1439Canning Vale DC WA 6970
sales@transnetequipment.com
AUSTRALIA
TransNet TongaTonga
Small IndustriesMa’ufangaTongaPh +67 627 939Fax +67 627 976
PO Box 2932Nukualofa
transnet@kalianet.to
TONGA
sales@transnet.co.nz NEW ZEALAND
TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.
Wishing You All A Very Merry ChristmasWe’d like to take this opportunity to thank you - our customers for all your support this year, 2014 has been busy with some exciting new agencies added to our portfolio of quality international brands. And 2015 is already shaping up to be even more exciting for us.As always we never close, although there won’t be anyone in the office on the stats, if you need us just call 0800 442 182 for assistance. A point to note is the courier companies reduce their runs over the holiday period so order early to ensure you don’t miss out.Once again, thank you for all your support this year, have a happy and safe festive season and enjoy the summer sun with your families and friends.The team at TransNet
New Look TransNet WebsiteThe new TransNet website was launched last month, it is jam packed with useful information and images so come and check it out.
www.transnet.co.nz