Post on 18-Sep-2019
LATHE MACHINE ACCESSORIESE27
Standard Accessories1.Internal Spindle .......................................................12.Pulley for Internal Grinding .................................... 23.Flat Belt ...................................................................14.Diamond tool ..........................................................15.Holder for Diamond Tool .........................................16.key Folds (8, 5, 3, 2mm) .........................................4
※VGR-175,VGR-185 WITHOUT INTERNAL SPINDLE※ECOMICAL TYPE FOR LIGHT DUTY ONLY
※ Types of Grinding For Work Pieces
For Internal Grinding
1. 3. 4.
5.
6.
Characteristic Features
which are made of alloy steel heat-treated for high wear resistance, precision, as well as maintaining to the lowest temperature for durability and stability.The motor base and the spindle bushing are adjustable.The motor is well designed with a special and nice appearance, The R.P.M. of this motor varied depending on the size of the workpiece.This grinder is capable of grinding the work piece to a minimum of 3 mm in outer diameter and from 2mm up in inner
The spindle bushing is made of cast iron, and supported by three surfaces. Therefore, it is durable and elastic.Materials such as steel, iron, copper (brass), aluminum, cast iron, plastics, procelain, marble, regardless of being heat treated or not, can be ground on this machine which functions lie a cylindrical grinder. So it may lower the cost of the production.We assure you of high quality products.
ORDER NO.VGR-150
Tool Post Grinder ON LatheW/O CE Light Duty
ORDERNO.
Main Dimension. (mm) NetWeight(kgs)
PackingSize(mm)A B C D E F G H J K L M N O
VGR-185 352 350 300-340 80 180 138 85 190 330 45-70 140 40 32 120 80 700x500x520
VGR-175 315 300 260-320 60 170 138 120 104 280 45-70 135 40 30 92 75 650x460x460
VGR-165 280 275 260-310 50 160 110 65 102 230 40-65 105 40 30 85 48 520x430x350
VGR-150 280 275 250-300 48 160 110 65 102 150 40-65 105 40 30 85 38 520x430x350
VGR-125 270 230 230-280 48 - 110 65 92 150 34-58 90 15 25 75 35 520x430x350
VGR-100 235 200 170 40 - 110 50 80 150 28 45 10 25 64 24 450x320x340
ORDERNO. HP
External Spindle Internal Spindle Grinder on Lather
(Length of Bed of Lather)
Ft.
Swingm/m CODE NO. Size of Wheel
dia x width-hole
(R.P.M.)Non-load
Speed
Diameterto be
ground
Size of Wheeldia x width x
hole
(R.P.M.)Non-load
Speed
GrindingDepth(mm)
VGR-185 3 12”x1”x1”60 cycle50 cycle
- Externalonly
- - - over 12 800-1800 5004-0011930 1600
VGR-175 2 10”x1”x1” 2300 1930 - - - 10-12 700-1700 5004-002
VGR-165 1 8”x3/4”x3/4” 30003700
24903070 25-50 1”x3/8”x1/4” 20000
135001680011500 70 8-10 650-1600 5004-003
VGR-150 1 5”x5/8”x5/8” 45006000
37505000 19-40 1”x3/8”x1/4” 20000
135001680011500 70 6-8 550-900 5004-004
VGR-125 1/2 5”x5/8”x5/8” 45006000
37505000 19-40 1”x3/8”x1/4” 20000
135001680011500 70 4-6 430-850 5004-005
VGR-100 1/4 5”x5/8”x5/8” 45006000
37505000 19-40 1”x3/8”x1/4” 20000
135001680011500 50 under 4 320-400 5004-006
Tool Post Grinder ON Lathe
LATHE MACHINE ACCESSORIES E28
TO
OL
PO
ST
GR
IND
ER
ON
LA
TH
E
A: Axial Direction B: Radial Direction (Star Turret)
A DIN 1809 (For DUPLOMATIC) B DIN 5480 (For SAUTER/DUPLOMATIC) C DIN 5482 (For SAUTER/DUPLOMATIC)
D MT (For BARUFFALDI) E IT (For DUPLOMATIC)
Coupling to DIN 1809 Coupling to DIN 5480 Coupling to DIN 5482
Spur Coupling Spur Coupling
VDI Tool HoldersCoupling Type System DIN69880
VDI Tool HoldersTool Holders Direction System DIN69880
LATHE MACHINE ACCESSORIESE29
VDI 20 VDI 30 VDI 40 VDI 50
SHAFT DIA. 20 30 40 50
BRB: backwardR: right hand
BLB: backwardL: left hand
FRF: forwardR: right hand
FLF: forwardL: left hand
TXXT: Tapping
EX:BR4018093290 it�’s VDI 40, right hand, coupling type 1809, backward comewith ER 32 nut. P.C.D. is 90mmFL3054822555 it�’s VDI 30 left hand coupling type 5482 (B15x12) forward, come with ER 25 nut. P.C.D. is 55mm
DAStright Direct Drive
Model
LATHE MACHINE ACCESSORIES E30
VD
I