Post on 27-Mar-2018
TISI Library Accession List Page 1
TISI Library Accession ListJuly - September 2002
ACOUSTIC SIGNALS
IEC IEC 61603-6 2001 Transmission of audio and/or video and related signals using infrared radiation -
P.6: Video and audio-visual signals / By International Electrotechnical Commission (IEC). Geneva IEC,2001.
ADHESIVE TAPE JSA JIS Z0237 2000 Testing methods of pressure-sensitive adhesive tapes and sheets / By Japanese
Standards Association (JSA). Tokyo: JSA, 2002.
ADHESIVES JSA JIS Z0237 2000 Testing methods of pressure-sensitive adhesive tapes and sheets / By Japanese
Standards Association (JSA). Tokyo: JSA, 2002.
AFTER-SALES SERVICES JSA JIS Z9920 2000 Complaints handling management systems - Guideline / By Japanese Standards
Association (JSA). Tokyo: JSA, 2001.
AIDS FOR THE DISABLED
ISO ISO 10542-1 2001 Technical systems and aids for disabled or handicapped persons - Wheelchair
tiedown and occupant-restraint systems - P.1: Requirements and test methods for all systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
JSA
TISI Library Accession List Page 2
JIS T9203 1999 Electric wheelchairs / By Japanese Standards Association (JSA). Tokyo: JSA,2001.
AIR - CARBONYL COMPOUNDS (INORGANIC)
ISO ISO 16000-3 2001 Indoor air - P.3: Determination of formaldehyde and other carbonyl compounds
- Active sampling method / By International Organization for Standardization (ISO). Geneva: ISO,2001.
AIR - FORMALDEHYDE
ISO ISO 16000-3 2001 Indoor air - P.3: Determination of formaldehyde and other carbonyl compounds
- Active sampling method / By International Organization for Standardization (ISO). Geneva: ISO,2001.
AIR - SAMPLING METHODS
ISO ISO 16200-1 2001 Workplace air quality - Sampling and analysis of volatile organic compounds
by solvent desorption/gas chromatography - P.1: Pumped sampling method / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
AIR - WORK STATIONS
ISO ISO 16200-1 2001 Workplace air quality - Sampling and analysis of volatile organic compounds by
solvent desorption/gas chromatography - P.1: Pumped sampling method / By International Organizationfor Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 3
AIR COMPRESSORS - PETROLEUM REFINING
ISO ISO 1440-2 2001 Petroleum and natural gas industries - Rotary-type positive-displacement
compressors - P.2: Packaging air compressors (oil-free) / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ANIMAL FATS
ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
ANIMAL OILS
ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
ANTHROPOMETRIC CHARACTERISTICS
JSA JIS L4004 2001 Sizing systems for men's garments / By Japanese Standards Association (JSA) and
Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2002.
JIS L4005 2001 Sizing systems for women's garments / By Japanese Standards Association (JSA)and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2001.
APERTURE CARDS
ISO ISO 3272-3 2001 Microfilming of technical drawings and other drawing office documents - P.3:
Aperture card for 35 mm microfilm / By International Organization for Standardization (ISO). 2nd ed. -- Geneva: ISO, 2001.
TISI Library Accession List Page 4
ARC WELDING
JSA JIS Z3252 2001 Covered electrodes for cast iron / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
JIS Z3930 2001 Determination of emission rate of particulate fume in arc welding / By JapaneseStandards Association (JSA) and Japan Welding Engineering Society (JWES). Tokyo: JSA, 2001.
AROMATIC COMPOUNDS
ISO ISO 17494 2001 Aromatic extracts, flavouring and perfuming compounds - Determination of
ethanol content - Gas chromatographic method on packed and capillary columns / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
AROMATIC COMPOUNDS - ETHYL ALCOHOL
ISO ISO 17494 2001 Aromatic extracts, flavouring and perfuming compounds - Determination of
ethanol content - Gas chromatographic method on packed and capillary columns / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
ARTISTS EQUIPMENT
JSA JIS S6026 2001 Crayons and oil pastels /By Japanese Standards Association (JSA). Tokyo: JSA, 2001. JIS S6028 2001 Water colour paints / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TISI Library Accession List Page 5
AXIAL-THRUST BEARINGS ISO ISO 12130-1 2001 Plain bearings - Hudrodynamic plain tilting pad thrust bearings under steady-
state conditions - P.1: Calculation of tilting pad thrust bearings / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 12130-2 2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - P.2: Functions for calculation of tilting pad thrust bearings / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
ISO 12130-3 2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - P.3: Guide values for the calculation of tilting pad thrust bearings / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
BALLS (BEARING COMPONENTS) ISO ISO 3290 2001 Rolling bearings - Balls - Dimensions and tolerances / By International
Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
BARS (MATERIALS) ISO ISO 16120-1 2001 Non-alloy steel wire rod for conversion to wire - P.1: General requirements / By
International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-2 2001 Non-alloy steel wire rod for conversion to wire - P.2: Specific requirements for
general purpose wire rod / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-3 2001 Non-alloy steel wire rod for conversion to wire - P.3: Specific requirements for
rimmed and rimmed-substitute, low-carbon steel wire rod / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 16120-4 2001 Non-alloy steel wire rod for conversion to wire - P.4: Specific requirements forwire rod for special applications / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
TISI Library Accession List Page 6
BEARINGS ISO ISO 12130-1 2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-
state conditions - P.1: Calculation of tilting pad thrust bearings / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 12130-2 2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - P.2: Functions for calculation of tilting pad thrust bearings / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
ISO 12130-3 2001 Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - P.3: Guide values for the calculation of tilting pad thrust bearings / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
BIOLOGICAL ANALYSIS AND TESTING
ISO ISO 10993-14 2001 Biological evaluation of medical devices - P.14: Identification and
quantification of degradation products from ceramics / By International Organization for Standardization(ISO). Geneva: ISO, 2001.
BOARD (PAPER)
ISO ISO 2759 2001 Board - Determination of bursting strength / By International Organization for
Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
BURST TESTS ISO ISO 2759 2001 Board - Determination of bursting strength / By International Organization forStandardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 7
CANS JSA JIS Z1602 1995 18 liter metal cans / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
CAST-IRON JSA JIS Z3252 2001 Covered electrodes for cast iron / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
CEMENTS
JSA JIS R5202 1999 Methods for chemical analysis of cements / By Japanese Standards Association
(JSA). Tokyo: JSA, 2001. JIS R5203 1995 Testing method for heat of hydration of cement / By Japanese Standards
Association (JSA). Tokyo: JSA, 2001.
CHANNEL FLOW ISO ISO 9123 2001 Measurement of liquid flow in open channels - Stage-fall-discharge relationships /
By International Organization for Standardization (ISO). Geneva: ISO, 2001.
CHARACTER SETS ISO ISO/IEC 8859-11 2001 Information technology - 8-bit single-byte coded graphic character sets -
P.11: Latin/Thai alphabet / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO/IEC 10646-2 2001 Information technology - Universal Multiple-Octet Coded Character Set
(UCS) - P.2: Supplementary Planes / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
TISI Library Accession List Page 8
CHEMICAL ANALYSIS AND TESTING JSA JIS M8720 2001 Iron ores - Determination of low-temperature reduction-disintegration / By
Japanese Standards Association (JSA) and Japan Iron and Steel Federation (JISF). Tokyo: JSA, 2001.
JIS R5202 1999 Methods for chemical analysis of cements / By Japanese Standards Association(JSA). Tokyo: JSA, 2001.
CLOTHING SIZES
JSA JIS L4004 2001 Sizing systems for men's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2002. JIS L4005 2001 Sizing systems for women's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2001.
CODED CHARACTER SETS
ISO ISO/IEC 8859-11 2001 Information technology - 8-bit single-byte coded graphic character sets -
P.11: Latin/Thai alphabet / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO/IEC 10646-2 2001 Information technology - Universal Multiple-Octet Coded Character Set
(UCS) - P.2: Supplementary Planes / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
COMMUNICATION NETWORKS
IEC IEC 61156-1 1994 Multicore and symmetrical pair/quad cables for digital communications - P.1:
General specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2001.
TISI Library Accession List Page 9
COMPLETE AND FILLED PACKAGES
ISO ISO 13355 2001 Packaging - Complete, filled transport packages and unit loads - Vertical random
vibration test / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
CONCENTRATES - METALS
ISO ISO/TR 15855 2001 Copper, lead and zinc sulfide concentrates - Step-by-step procedure for the
testing of static scales / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
CONCENTRATES - TESTING
ISO ISO/TR 15855 2001 Copper, lead and zinc sulfide concentrates - Step-by-step procedure for the
testing of static scales / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
CONSUMER PROTECTION
JSA JIS Z9920 2000 Complaints handling management systems - Guideline / By Japanese Standards
Association (JSA). Tokyo: JSA, 2001.
CONTROL SYSTEMS
ISO ISO 4040 2001 Road vehicles - Location of hand controls, indicators and tell-tales in motor
vehicles / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2001.
COOKING APPLIANCES
IEC IEC 60335-2-9 2002 Household and similar electrical appliances - Safety - P.2-9: Particular
requirements for grills, toasters and similar portable cooking appliances / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.
TISI Library Accession List Page 10
COVERED ELECTRODES
JSA JIS Z3252 2001 Covered electrodes for cast iron / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001. JIS Z3930 2001 Determination of emission rate of particulate fume in arc welding / By Japanese
Standards Association (JSA) and Japan Welding Engineering Society (JWES). Tokyo: JSA, 2001.
CRAYONS
JSA JIS S6026 2001 Crayons and oil pastels / By Japanese Standards Association (JSA). Tokyo: JSA,
2001.
CUTTING TOOLS
ISO ISO 1986-1 2001 Test conditions for surface grinding machines with horizontal grinding wheel
spindle and reciprocating table - Testing of the accuracy - P.1: Machines with a table length of up to 1600 mm / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
DATA MEDIA
ISO ISO 12142 2001 Electronic imaging - Media error monitoring and reporting techniques for
verification of stored data on optical digital data disks / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
DAMP-HEAT TESTS
IEC IEC 60512-11-2 2002 Connectors for electronic equipment - Tests and measurements - P.11-2:
Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.
TISI Library Accession List Page 11
IEC 60512-11-3 2002 Connectors for electronic equipment - Tests and measurements - P.11-3:Climatic tests - Test 11c: Damp heat, steady state / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
IEC 60512-11-12 2002 Connectors for electronic equipment - Tests and measurements - P.11-12:Climatic tests - Test 11m: Damp heat, cyclic / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
DETERMINATION OF CONTENT - ETHYL ALCOHOL
ISO ISO 17494 2001 Aromatic extracts, flavouring and perfuming compounds - Determination of
ethanol content - Gas chromatographic method on packed and capillary columns / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
DIMENSIONAL TOLERANCES
ISO ISO 1206 2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 -
Boundary dimensions and tolerances / By International Organization for Standardization (ISO). 3rd ed. -- Geneva, ISO, 2001.
DISHWASHING MACHINES
IEC IEC 60335-2-5 2002 Household and similar electrical appliances - Safety - P.2-5: Particular
requirements for dishwashers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.
DRILLING (MINERAL EXTRACTION)
ISO ISO 13533 2001 Petroleum and natural gas industries - Drilling and production equipment - Drill-
through equipment / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 12
ELECTRIC CABLE SYSTEMS
IEC IEC 61537 2001 Cable tray systems and cable ladder systems for cable management / By
International Electrotechnical Commission (IEC). Geneva: IEC, 2001.
ELECTRIC CONDUITS
IEC IEC 61386-21 2002 Conduit systems for cable management - P.21: Particular requirements - Rigid
conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
IEC 61386-22 2002 Conduit systems for cable management - P.22: Particular requirements -Pliable conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
IEC 61386-23 2002 Conduit systems for cable management - P.23: Particular requirements -Flexible conduit systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
ELECTRIC CONNECTORS - COLD TESTS
IEC IEC 60512-11-10 2002 Connectors for electronic equipment - Tests and measurements - P.11-10:
Climatic tests - Test 11J: Cold / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.
ELECTRIC CONNECTORS - CORROSION TESTS
IEC IEC 60512-11-6 2002 Connectors for electronic equipment - Tests and measurements - P.11-6:
Climatic tests - Test 11f: Corrosion, salt mist / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
TISI Library Accession List Page 13
ELECTRIC CONNECTORS - DAMP-HEAT TESTS
IEC IEC 60512-11-2 2002 Connectors for electronic equipment - Tests and measurements - P.11-2:
Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.
IEC 60512-11-3 2002 Connectors for electronic equipment - Tests and measurements - P.11-3:Climatic tests - Test 11c: Damp heat, steady state / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
IEC 60512-11-12 2002 Connectors for electronic equipment - Tests and measurements - P.11-12:Climatic tests - Test 11m: Damp heat, cyclic / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
ELECTRIC CONNECTORS - DRY-HEAT TESTS
IEC IEC 60512-11-9 2002 Connectors for electronic equipment - Tests and measurements - P.11-9:
Climatic tests - Test 11i: Dry heat / By International Electrotechnical Commission (IEC). Geneva: IEC,2002.
ELECTRIC CONNECTORS - DYNAMIC TESTING
IEC IEC 60512-6-3 2002 Connectors for electronic equipment - Tests and measurements - P.6-3:
Dynamic stress tests - Test 6c: Shock / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.
ELECTRIC CONNECTORS - GAS-TIGHTNESS TESTS
IEC IEC 60512-11-13 2002 Connectors for electronic equipment - Tests and measurements - P.11-13:
Climatic tests - Test 11n: Gas tightness, solderless wrapped connections / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.
TISI Library Accession List Page 14
ELECTRIC CONNECTORS - LOW-PRESSURE TESTS
IEC IEC 60512-11-11 2002 Connectors for electronic equipment - Tests and measurements - P.11-11:
Climatic tests - Test 11k: Low air pressure / By International Electrotechnical Commission (IEC).Geneva: IEC, 2002.
IEC 60512-11-2 2002 Connectors for electronic equipment - Tests and measurements - P.11-2:Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2002.
ELECTRIC CONNECTORS - MOULD GROWTH INHIBITORS IEC IEC 60512-11-5 2002 Connectors for electronic equipment - Tests and measurements - P.11-5:
Climatic tests - Test 11e: Mould growth / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.
ELECTRIC CONNECTORS - TEMPERATURE MEASUREMENT
IEC IEC 60512-11-4 2002 Connectors for electronic equipment - Tests and measurements - P.11-4:
Climatic tests - Test 11d: Rapid change of temperature / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.
ELECTRIC CONNECTORS - VIBRATION TESTING
IEC IEC 60512-6-4 2002 Connectors for electronic equipment - Tests and measurements - P.6-4:
Dynamic stress tests - Test 6d: Vibration (sinusoidal) / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.
TISI Library Accession List Page 15
ELECTRIC MOTORS
JSA JIS T9203 1999 Electric wheelchairs / By Japanese Standards Association (JSA). Tokyo: JSA,
2001.
ELECTRICAL COMPONENTS - CLASSIFICATION SYSTEMS
IEC IEC 61360-2 2002 Standard data element types with associated classification scheme for electric
components - P.2: EXPRESS dictionary schema / By International Electrotechnical Commission (IEC).2nd ed. - - Geneva : IEC, 2002.
ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 60335-2-11 2002 Household and similar electrical appliances - Safety - P.2-11: Particular
requirements for tumble dryers / By International Electrotechnical Commission (IEC). 6th ed. - -Geneva: IEC, 2002.
IEC 60335-2-25 2002 Household and similar electrical appliances - Safety - P.2-25: Particularrequirements for microwave ovens, including combination microwave ovens / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.
IEC 60335-2-3 2002 Household and similar electrical appliances - Safety - P.2-3: Particularrequirements for electric irons / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.
IEC 60335-2-4 2002 Household and similar electrical appliances - Safety - P.2-4: Particularrequirements for spin extractors / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.
IEC 60335-2-5 2002 Household and similar electrical appliances - Safety - P.2-5: Particularrequirements for dishwashers / By International Electrotechnical Commission (IEC). 5th ed. - - Geneva:IEC, 2002.
TISI Library Accession List Page 16
IEC 60335-2-9 2002 Household and similar electrical appliances - Safety - P.2-9: Particularrequirements for grills, toasters and similar portable cooking appliances / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.
ELECTRICALLY-OPERATED DEVICES
JSA JIS Z8801-3 2000 Test sieves - P.3: Test sieves of electroformed sheets / By Japanese Standards
Association (JSA). Tokyo: JSA, 2002.
ERROR ANALYSIS ISO ISO 12142 2001 Electronic imaging - Media error monitoring and reporting techniques for
verification of stored data on optical digital data disks / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ETHYL ALCOHOL
ISO ISO 17494 2001 Aromatic extracts, flavouring and perfuming compounds - Determination of
ethanol content - Gas chromatographic method on packed and capillary columns / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
EXTRACTION METHODS OF ANALYSIS
ISO ISO 17495 2001 Water quality - Determination of selected nitrophenols - Method by solid-phase
extraction and gas chromatography with mass spectrometric detection / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 17
FATS - PEROXIDE NUMBER
ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
FATS - LIQUID CHROMATOGRAPHY
ISO ISO 16931 2001 Animal and vegetable fats and oils - Determination of polymerized triglycerides
content by high-performance size-exclusion chromatography (HPSEC) / By International Organizationfor Standardization (ISO). Geneva: ISO, 2001.
FILLER WIRE
JSA JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By Japanese
Standards Association (JSA). Tokyo: JSA, 2001.
FIRE-RESISTANT MATERIALS
ISO ISO 4404-1 2001 Petroleum and related products - Determination of the corrosion resistance of
fire-resistant hydraulic fluids - P.1: Water-containing fluids / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 18
FLANGES STEELS
CSBTS GB/T 9112-9124 2000 Steel pipe flanges - GB/T 9112: Types and parameter for steel pipe flanges
- GB/T 9113: Integral steel pipe flanges - P.1: With flat face or raised face - P.2: With male and femaleface - P.3: With tongue and groove face - P.4: With ring-joint face - GB/T 9114: Hubbed screwed steelpipe flanges with raised face - GB/T 9115: Steel pipe welding neck flanges - P.1: With flat face or raisedface - P.2: With male and female face - P.3: With tongue and groove face - P.4: With ring-joint face -GB/T 9116: Hubbed slip-on-welding steel pipe flanges - P.1: With flat face or raised face - P.2: Withmale and female face - P.3: With tongue and groove face - P.4: With ring-joint face - GB/T 9117:Hubbed socket welding steel pipe flanges - P.1: With raised face - P.2: With male and female face - P.3:With tongue and groove face - P.4: With ring-joint face - GB/T 9118: Loose hubbed steel pipe flangeswith welding neck collar - P.1: With raised face - P.2: With ring-joint face - GB/T 9119: Slip-on-weldingplate steel pipe flanges with flat face or raised face - GB/T 9120: Loose plate steel pipe flanges withwelding neck collar - P.1: With raised face - P.2: With male and female face - P.3: With tongue andgroove face - GB/T 9121: Loose plate steel pipe flanges with weld-on collar - P.1: With raised face - P.2:With male and female face - P.3: With tongue and groove face - GB/T 9122: Loose plate steel pipeflanges with lapped end - GB/T 9123: Steel pipe blank flanges - P.1: With flat face or raised face - P.2:With male and female face - P.3: With tongue and groove face - P.4: With ring-joint face - GB/T 9124:Steel pipe flanges / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing;CSBTS, 2001.
FLOW MEASUREMENT
ISO ISO 9123 2001 Measurement of liquid flow in open channels - Stage-fall-discharge relationships /
By International Organization for Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 19
FLUIDS - CORROSION RESISTANCE
ISO ISO 4404-1 2001 Petroleum and related products - Determination of the corrosion resistance of
fire-resistant hydraulic fluids - P.1: Water-containing fluids / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
FLUIDS - FIRE-RESISTANT MATERIALS
ISO ISO 4404-1 2001 Petroleum and related products - Determination of the corrosion resistance of
fire-resistant hydraulic fluids - P.1: Water-containing fluids / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
FLUXES (MATERIALS)
JSA JIS Z3283 2001 Resin flux cored solders / By Japanese Standards Association (JSA). Tokyo:
JSA, 2001.
FUMES
JSA JIS Z3930 2001 Determination of emission rate of particulate fume in arc welding / By Japanese
Standards Association (JSA) and Japan Welding Engineering Society (JWES). Tokyo: JSA, 2001.
GAS ANALYSIS - VOCABULARY
ISO ISO 7504 2001 Gas analysis - Vocabulary / By International Organization for Standardization
(ISO). 2nd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 20
GAS CHROMATOGRAPHY
ISO ISO 17494 2001 Aromatic extracts, flavouring and perfuming compounds - Determination ofethanol content - Gas chromatographic method on packed and capillary columns / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001. ISO 17495 2001 Water quality - Determination of selected nitrophenols - Method by solid-phaseextraction and gas chromatography with mass spectrometric detection / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
GAS TUNGSTEN-ARC WELDING JSA JIS Z3233 2001 Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and
welding / By Japanese Standards Association (JSA). Tokyo: JSA, 2001. JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By Japanese
Standards Association (JSA). Tokyo: JSA, 2001.
GAS WELDING
JSA JIS Z3201 2001 Gas welding rods for mild steel / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
GAS-SHIELDED WELDING
JSA JIS Z3233 2001 Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and
welding / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TISI Library Accession List Page 21
GASEOUS FUELS
ISO ISO 6993 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous
fuels - Specifications / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2001.
GRAPHIC SYMBOLS
IEC IEC 80416-1 2001 Basic principles for graphical symbols for use on equipment - P.1: Creation of
symbol originals / By International Electrotechnical Commission(IEC). Geneva: ISO, 2001.
GRINDING MACHINES
ISO ISO 1986-1 2001 Test conditions for surface grinding machines with horizontal grinding wheel
spindle and reciprocating table - Testing of the accuracy - P.1: Machines with a table length of up to 1600 mm / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
GRINDING WHEELS
ISO ISO 1986-1 2001 Test conditions for surface grinding machines with horizontal grinding wheel
spindle and reciprocating table - Testing of the accuracy - P.1: Machines with a table length of up to 1600 mm / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
HARDNESS MEASUREMENT
ISO ISO 2039-1 2001 Plastics - Determination of hardness - P.1: Ball indentation method / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva, ISO, 2001.
TISI Library Accession List Page 22
HOT-DIP COATING - STEELS
ISO ISO 9364 2001 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and
structural qualities / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2001.
HYDRATION
JSA JIS R5203 1995 Testing method for heat of hydration of cement / By Japanese Standards
Association (JSA). Tokyo: JSA, 2001.
IGNITABILITY - FIRE TESTS
IEC IEC 61482-1 2002 Live working - Flame-resistant materials for clothing for thermal protection of
workers - Thermal hazards of an electric arc - P.1: Test methods / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.
INCINERATORS - SHIPS
ISO ISO 13617 2001 Ships and marine technology - Shipboard incinerators - Requirements / By
International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
INFLATABLE BOATS
ISO ISO 6185-1 2001 Inflatable boats - P.1: Boats with a maximum motor power rating of 4,5 kW / By
International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 6185-2 2001 Inflatable boats - P.2: Boats with maximum motor power rating of 4,5 kW to 15
kW inclusive / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 23
ISO 6185-3 2001 Inflatable boats - P.3: Boats with a maximum motor power rating of 15 kW andgreater / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
INFORMATION EXCHANGE
ISO ISO/IEC 21407 2001 Information technology - Telecommunications and information exchange
between systems - Private integrated services network - Specification, functional model and informationflows - Simple dialog supplementary service / By International Organization for Standardization (ISO).Geneva: ISO, 2001.
ISO/IEC 21408 2001 Information technology - Telecommunications and information exchangebetween systems - Private integrated services network - Inter-exchange signalling protocol - Simpledialog supplementary service / By International Organization for Standardization (ISO). Geneva: ISO,2001.
ISO/IEC 21410 2001 Information technology - Telecommunications and information exchangebetween systems - Corporate telecommunication networks - Signalling interworking between QSIG andH.323 - CAll transfer supplementary services / By International Organization for Standardization (ISO).Geneva: ISO, 2001.
INSPECTORS JSA JIS Z2305 2001 Non-destructive testing - Qualification and certification of personnel / By
Japanese Standards Association (JSA). Tokyo: JSA, 2001.
INTERNAL COMBUSTION ENGINES - VIBRATION
ISO ISO 3046-5 2001 Reciprocating internal combustion engines - Performance - P.5: Torsional
vibrations / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 24
INTERNATIONAL STANDARD BOOK NUMBERING
CSBTS GB/T 5795 2002 China standard book numbering / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
INTERNATIONAL STANDARD SERIAL NUMBERING
CSBTS GB/T 9999 2001 China Standard Serial Numbering / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2001.
IRON ORES
JSA JIS M8720 2001 Iron ores - Determination of low-temperature reduction-disintegration / By
Japanese Standards Association (JSA) and Japan Iron and Steel Federation (JISF). Tokyo: JSA, 2001.
IRONS
IEC IEC 60335-2-3 2002 Household and similar electrical appliances - Safety - P.2-3: Particular
requirements for electric irons / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.
IRONS - ELECTRICALLY-OPERATED DEVICES
IEC IEC 60335-2-3 2002 Household and similar electrical appliances - Safety - P.2-3: Particular
requirements for electric irons / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.
TISI Library Accession List Page 25
ISO PUBLICATION
ISO ISO 05-6817 2002 WTO TBT Standards Code Directory - Standardizing bodies having accepted
the WTO TBT Code of Good Practice for the preparation, adoption and application of standards / ByInternational Organization for Standardization (ISO), World Trade Organization (WTO) and InternationalElectrotechnical Commission (IEC). 7th ed. - - Geneva: ISO, 2002.
ISO 08-6815 2002 ISO Memento 2002 / By International Organization for Standardization (ISO).Paris: ISO, 2002.
JOURNAL BEARINGS
ISO ISO 12167-1 2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under
steady-state conditions - P.1: Calculation of oil-lubricated plain journal bearings with drainage grooves /By International Organization for Standardization (ISO). Geneva: ISO, 2001.
ISO 12167-2 2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves understeady-state conditions - P.2: Characteristic values for the calculation of oil-lubricated plain journalbearings with drainage grooves / By International Organization for Standardization (ISO). Geneva: ISO,2001.
LADDERS - INSULATED MATERIALS
IEC IEC 61478 2001 Live working - Ladders of insulating materials / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2001.
LADIES CLOTHING
JSA JIS L4005 2001 Sizing systems for women's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2001.
TISI Library Accession List Page 26
LIBRARY AND INFORMATION SCIENCE
CSBTS GB/T 5795 2002 China standard book numbering / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 9999 2001 China Standard Serial Numbering / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2001.
LIFTING
ISO ISO 3077 2001 Short-link chain for lifting purposes - Grade T, (type T, DAT and DT), fine-
tolerance hoist chain / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO,2001.
LINK CHAINS
ISO
ISO 3077 2001 Short-link chain for lifting purposes - Grade T, (type T, DAT and DT), fine-tolerance hoist chain / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO,2001.
LIQUID CHROMATOGRAPHY ISO
ISO 16931 2001 Animal and vegetable fats and oils - Determination of polymerized triglyceridescontent by high-performance size-exclusion chromatography (HPSEC) / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
LOW-ALLOY STEELS JSA JIS Z3201 2001 Gas welding rods for mild steel / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
TISI Library Accession List Page 27
JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By JapaneseStandards Association (JSA). Tokyo: JSA, 2001.
LOW-CARBON STEELS
ISO ISO 16120-3 2001 Non-alloy steel wire rod for conversion to wire - P.3: Specific requirements for
rimmed and rimmed-substitute, low-carbon steel wire rod / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
JSA JIS Z3201 2001 Gas welding rods for mild steel / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By JapaneseStandards Association (JSA). Tokyo: JSA, 2001.
LUMINAIRES IEC IEC 60598-2-3 1993 Luminaires - P.2-3: Particular requirements -Luminaires for road and street
lighting / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2001. IEC 60598-2-8 1996 Luminaires - P.2-8: Particular requirements - Handlamps / By International
Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2001.
MAGNETIC COMPASSES - SHIPS
ISO ISO 6328 2001 Ships and marine technology - Gyro-compasses for high-speed craft / By
International Organization for Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 28
MANAGEMENT SYSTEM
SAA AS/NZS 4581 1999 Management system integration - Guidance to business, goverment and
community organizations / By Standards Australia (SAA) and Standards New Zealand (SNZ). NewSouth Wales: SAA, 1999.
MEDICAL EQUIPMENT
ISO ISO 10993-14 2001 Biological evaluation of medical devices - P.14: Identification and
quantification of degradation products from ceramics / By International Organization for Standardization(ISO). Geneva: ISO, 2001.
ISO/TS 11139 2001 Sterilization of health care products - Vocabular / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
MEN CLOTHING
JSA JIS L4004 2001 Sizing systems for men's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2002.
METAL COATINGS - STEELS
ISO ISO 9364 2001 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and
structural qualities / By International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO,2001.
MICROFILM
ISO ISO 3272-3 2001 Microfilming of technical drawings and other drawing office documents - P.3:
Aperture card for 35 mm microfilm / By International Organization for Standardization (ISO). 2nd ed. -- Geneva: ISO, 2001.
TISI Library Accession List Page 29
MICROWAVE OVENS IEC IEC 60335-2-25 2002 Household and similar electrical appliances - Safety - P.2-25: Particular
requirements for microwave ovens, including combination microwave ovens / By InternationalElectrotechnical Commission (IEC). 5th ed. - - Geneva: IEC, 2002.
MOTION-PICTURE FILM
ISO ISO 4241 2001 Cinematography - Theater projection leader, trailer and cue marks - Specifications
/ By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
MOTOR VEHICLES
JSA JIS T9203 1999 Electric wheelchairs / By Japanese Standards Association (JSA). Tokyo: JSA,
2001.
MOTOR VEHICLES - CONTROL SYSTEMS
ISO ISO 4040 2001 Road vehicles - Location of hand controls, indicators and tell-tales in motor
vehicles / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2001.
MULTICORE CABLES
IEC IEC 61156-1 1994 Multicore and symmetrical pair/quad cables for digital communications - P.1:
General specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2001.
NON-DESTRUCTIVE TESTING JSA JIS Z2305 2001 Non-destructive testing - Qualification and certification of personnel / By
Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TISI Library Accession List Page 30
JIS Z2343-1 2001 Non-destructive testing - Penetrant testing - P.1: General principles - Method forliquid penetrant testing and classification of the penetrant indication / By Japanese Standards Association(JSA). Tokyo: JSA, 2001.
JIS Z2343-2 2001 Non-destructive testing - Penetrant testing - P.2: Testing of penetrant materials /By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
JIS Z2343-3 2001 Non-destructive testing - Penetrant testing - P.3: Reference test blocks / ByJapanese Standards Association (JSA). Tokyo: JSA, 2002.
JIS Z2343-4 2001 Non-destructive testing - Penetrant testing - P.4: Equipment / By JapaneseStandards Association (JSA). Tokyo: JSA, 2002.
NUMERICAL DESIGNATIONS
JSA JIS L4004 2001 Sizing systems for men's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2002. JIS L4005 2001 Sizing systems for women's garments / By Japanese Standards Association (JSA)
and Japan Apparel Technology of Research Association (JATRA). Tokyo: JSA, 2001.
OILS
ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
ISO 16931 2001 Animal and vegetable fats and oils - Determination of polymerized triglyceridescontent by high-performance size-exclusion chromatography (HPSEC) / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ORGANIC ACIDS
ISO ISO 7781 2001 Styrene-butadine rubber, raw - Determination of soap and orgnic-acid content / ByInternational Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 31
PACKAGING
ISO ISO 13355 2001 Packaging - Complete, filled transport packages and unit loads - Vertical random
vibration test / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
PASSENGER LIFTS
ISO ISO 7465 2001 Passenger lifts and service lifts - Guide rails for lift and counterweights - T-type /
By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
PATIENT TRANSPORT EQUIPMENT
ISO ISO 10542-1 2001 Technical systems and aids for disabled or handicapped persons - Wheelchair
tiedown and occupant-restraint systems - P.1: Requirements and test methods for all systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
JSA JIS T9203 1999 Electric wheelchairs / By Japanese Standards Association (JSA). Tokyo: JSA,
2001.
PENCIL SHARPENERS
JSA JIS S6049 2001 Electric or manual pencil sharpeners / By Japanese Standards Association (JSA).
Tokyo: JSA, 2002.
PENETRATION TESTS
JSA JIS Z2343-1 2001 Non-destructive testing - Penetrant testing - P.1: General principles - Method for
liquid penetrant testing and classification of the penetrant indication / By Japanese Standards Association(JSA). Tokyo: JSA, 2001.
TISI Library Accession List Page 32
JIS Z2343-2 2001 Non-destructive testing - Penetrant testing - P.2: Testing of penetrant materials /By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
JIS Z2343-3 2001 Non-destructive testing - Penetrant testing - P.3: Reference test blocks / ByJapanese Standards Association (JSA). Tokyo: JSA, 2002.
JIS Z2343-4 2001 Non-destructive testing - Penetrant testing - P.4: Equipment / By JapaneseStandards Association (JSA). Tokyo: JSA, 2002.
PEROXIDE NUMBER
ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
PETROLEUM REFINING
ISO ISO 13704 2001 Petroleum and natural gas industries - Calculation of heater-tube thickness in
petroleum refineries / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
PHOTOGRAPHIC IMAGES
ISO ISO/TS 12033 2001 Electronic imaging - Guidance for selection of document image compression
methods / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
PHOTOGRAPHIC MATERIALS - CONTAINERS
ISO ISO 18902 2001 Imaging materials - Processed photographic films, plates and papers - Filling
enclosures and storage containers / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
TISI Library Accession List Page 33
PIPES
ISO ISO 6993 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous
fuels - Specifications / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2001.
ISO 13704 2001 Petroleum and natural gas industries - Calculation of heater-tube thickness inpetroleum refineries / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
PLAIN BEARINGS
ISO ISO 12167-1 2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under
steady-state conditions - P.1: Calculation of oil-lubricated plain journal bearings with drainage grooves /By International Organization for Standardization (ISO). Geneva: ISO, 2001.
ISO 12167-2 2001 Plain bearings - Hydrostatic plain journal bearings with drainage grooves understeady-state conditions - P.2: Characteristic values for the calculation of oil-lubricated plain journalbearings with drainage grooves / By International Organization for Standardization (ISO). Geneva: ISO,2001.
PLASTICS
ISO ISO 294-5 2001 Plastics - Injection moulding of test specimens of thermoplastic materials - P.5:
Preparation of standard specimens for investigating anisotrop / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 2039-1 2001 Plastics - Determination of hardness - P.1: Ball indentation method / ByInternational Organization for Standardization (ISO). 3rd ed. - - Geneva, ISO, 2001.
TISI Library Accession List Page 34
POLYVINYL CHLORIDE
ISO ISO 6993 2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous
fuels - Specifications / By International Organization for Standardization (ISO). 2nd ed. - - Geneva:ISO, 2001.
PORTLAND CEMENT
JSA JIS R5202 1999 Methods for chemical analysis of cements / By Japanese Standards Association
(JSA). Tokyo: JSA, 2001.
POWDER METALLURGY - BULK MODULUS
ISO ISO 3927 2001 Metallic powders, excluding powders for hardmetals - Determination of
compressibility in unitaxial compression / By International Organization for Standardization (ISO). 3rded. - - Geneva: ISO, 2001.
PRESSURE-SENSITIVE MATERIALS
JSA JIS Z0237 2000 Testing methods of pressure-sensitive adhesive tapes and sheets / By Japanese
Standards Association (JSA). Tokyo: JSA, 2002.
REINFORCED PLASTICS - SPECIMEN PREPARATION
ISO ISO 1268-1 2001 Fibre-reinforced plastics - Methods of producing test plates - P.1: General
conditions / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
TISI Library Accession List Page 35
RESINS (NATURAL)
JSA JIS Z3283 2001 Resin flux cored solders / By Japanese Standards Association (JSA). Tokyo:
JSA, 2001.
RESTRAINT SYSTEMS (PROTECTIVE) - TESTING
ISO ISO 10542-1 2001 Technical systems and aids for disabled or handicapped persons - Wheelchair
tiedown and occupant-restraint systems - P.1: Requirements and test methods for all systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
ROAD LIGHTING
IEC
IEC 60598-2-3 1993 Luminaires - P.2-3: Particular requirements - Luminaires for road and streetlighting / By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2001.
ROAD VEHICLES ISO ISO 4040 2001 Road vehicles - Location of hand controls, indicators and tell-tales in motor
vehicles / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2001. ISO 4165 2001 Road vehicles - Electrical connections - Double-pole connection / By International
Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001. ISO 16844-1 2001 Road vehicles - Tachograph systems - P.1: Electrical connectors / By
International Organization for Standardization (ISO). Geneva: ISO, 2001.
ROAD VEHICLES - ELECTRIC CONNECTORS
ISO ISO 4040 2001 Road vehicles - Location of hand controls, indicators and tell-tales in motor
vehicles / By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 36
ISO 4165 2001 Road vehicles - Electrical connections - Double-pole connection / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
ISO 16844-1 2001 Road vehicles - Tachograph systems - P.1: Electrical connectors / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
ROAD VEHICLES - ELECTRICALLY-OPERATED DEVICES
IEC IEC 61851-1 2001 Electric vehicle conductive charging system - P.1: General requirements / By
International Electrotechnical Commission (IEC). Geneva: IEC, 2001.
ISO ISO 6469-1 2001 Electric road vehicles - Safety specifications - P.1: On-board electrical energy
storage / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 6469-2 2001 Electric road vehicles - Safety specifications - P.2: Functional safety means and
protection against failures / By International Organization for Standardization (ISO). Geneva: ISO,2001.
ISO 6469-3 2001 Electric road vehicles - Safety specifications - P.3: Protection of persons againstelectric hazards / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
ROLLERS (BEARING COMPONENTS)
ISO ISO 1206 2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 -
Boundary dimensions and tolerances / By International Organization for Standardization (ISO). 3rd ed. -- Geneva, ISO, 2001.
ROLLING BEARINGS
ISO ISO 1206 2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 -
Boundary dimensions and tolerances / By International Organization for Standardization (ISO). 3rd ed. -- Geneva, ISO, 2001.
TISI Library Accession List Page 37
ISO 3290 2001 Rolling bearings - Balls - Dimensions and tolerances / By InternationalOrganization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
ROTATING ELECTRIC MACHINES
IEC IEC TS 60034-17 2002 Rotating electrical machines - P.17: Cage induction motors when fed from
converters - Application guide / By International Electrotechnical Commission (IEC). 3rd ed. - -Geneva: IEC, 2002.
SAFETY ANCHORAGES
ISO ISO 10333-5 2001 Personal fall-arrest systems - P.5: Connectors with self-closing and self-locking
gates / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
SCREENING EQUIPMENT
JSA JIS Z8801-1 2000 Testing sieves - P.1: Test sieves of metal wire cloth / By Japanese Standards
Association (JSA). Tokyo: JSA, 2002. JIS Z8801-2 2000 Test sieves - P.2: Test sieves of perforated metal plate / By Japanese Standards
Association (JSA). Tokyo: JSA, 2002. JIS Z8801-3 2000 Test sieves - P.3: Test sieves of electroformed sheets / By Japanese Standards
Association (JSA). Tokyo: JSA, 2002.
SERVICE LIFTS
ISO ISO 7465 2001 Passenger lifts and service lifts - Guide rails for lift and counterweights - T-type /
By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 38
SHAFTS (ROTATING)
ISO ISO 7919-2 2001 Mechanical vibration - Evaluation of machine vibration by measurements on
rotating shafts - P.2: Land-based steam turbines and generators in excess to 50 MW with normaloperating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
SHEET MATERIALS
JSA JIS Z0237 2000 Testing methods of pressure-sensitive adhesive tapes and sheets / By Japanese
Standards Association (JSA). Tokyo: JSA, 2002.
SOAPS
ISO ISO 7781 2001 Styrene-butadine rubber, raw - Determination of soap and orgnic-acid content / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
SOLDERABILITY TESTING
JSA JIS Z3283 2001 Resin flux cored solders / By Japanese Standards Association (JSA). Tokyo:
JSA, 2001.
SOLDERING
JSA JIS Z3283 2001 Resin flux cored solders / By Japanese Standards Association (JSA). Tokyo:
JSA, 2001.
TISI Library Accession List Page 39
SOLID FUELS - MINERALS
ISO ISO/TS 12902 2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen -
Instrumental methods / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
SPECIMEN PREPARATION
ISO ISO 294-5 2001 Plastics - Injection moulding of test specimens of thermoplastic materials - P.5:
Preparation of standard specimens for investigating anisotrop / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 1268-1 2001 Fibre-reinforced plastics - Methods of producing test plates - P.1: Generalconditions / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
STANDARDIZATION
ISO ISO 08-6815 2002 ISO Memento 2002 / By International Organization for Standardization (ISO).
Paris: ISO, 2002.
STANDARDIZATION - DIRECTORIES
ISO ISO 05-6817 2002 WTO TBT Standards Code Directory - Standardizing bodies having accepted
the WTO TBT Code of Good Practice for the preparation, adoption and application of standards / ByInternational Organization for Standardization (ISO), World Trade Organization (WTO) and InternationalElectrotechnical Commission (IEC). 7th ed. - - Geneva: ISO, 2002.
STATIONERY
JSA JIS S6028 2001 Water colour paints / By Japanese Standards Association (JSA). Tokyo: JSA,
2001.
TISI Library Accession List Page 40
STATISTICAL DATA
ISO ISO 16269-7 2001 Statistical interpretation of data - P.7: Median - Estimation and confidence
intervals / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
STEELS
ISO ISO 16120-1 2001 Non-alloy steel wire rod for conversion to wire - P.1: General requirements / By
International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-2 2001 Non-alloy steel wire rod for conversion to wire - P.2: Specific requirements for
general purpose wire rod / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-3 2001 Non-alloy steel wire rod for conversion to wire - P.3: Specific requirements for
rimmed and rimmed-substitute, low-carbon steel wire rod / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO 16120-4 2001 Non-alloy steel wire rod for conversion to wire - P.4: Specific requirements forwire rod for special applications / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
STERILIZATION (HYGIENE)
ISO ISO/TS 11139 2001 Sterilization of health care products - Vocabular / By International
Organization for Standardization (ISO). Geneva: ISO, 2001.
STERILIZATION (HYGIENE) - VOCABULARY
ISO ISO/TS 11139 2001 Sterilization of health care products - Vocabular / By International
Organization for Standardization (ISO). Geneva: ISO, 2001.
TISI Library Accession List Page 41
STRIPS
ISO ISO 6932 2001 Cold-reduced carbon steel strip with a maximum carbon of 0,25% / By
International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
STYRENE-BUTADINE RUBBER
ISO ISO 7781 2001 Styrene-butadine rubber, raw - Determination of soap and orgnic-acid content / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
TELECOMMUNICATION
ISO ISO/IEC 21407 2001 Information technology - Telecommunications and information exchange
between systems - Private integrated services network - Specification, functional model and informationflows - Simple dialog supplementary service / By International Organization for Standardization (ISO).Geneva: ISO, 2001.
ISO/IEC 21408 2001 Information technology - Telecommunications and information exchangebetween systems - Private integrated services network - Inter-exchange signalling protocol - Simpledialog supplementary service / By International Organization for Standardization (ISO). Geneva: ISO,2001.
ISO/IEC 21409 2001 Information technology - Telecommunications and information exchangebetween systems - Corporate telecommunication networks - Signalling interworking between QSIG andH.323 - Generic functional protocol for the support of supplementary services / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2001.
ISO/IEC 21410 2001 Information technology - Telecommunications and information exchangebetween systems - Corporate telecommunication networks - Signalling interworking between QSIG andH.323 - CAll transfer supplementary services / By International Organization for Standardization (ISO).Geneva: ISO, 2001.
TISI Library Accession List Page 42
ISO/IEC 21411 2001 Information technology - Telecommunications and informaiton exchangebetween systems - Corporate telecommunication networks - Signalling interworking between QSIG andH.323 - Call diversion supplementary services / By International Organization for Standardization (ISO).Geneva: ISO, 2001.
ISO/IEC 21888 2001 Information technology - Telecommunications and information exchangebetween systems - Private integrated services network - Specification, functional model and informationflows - Call identification and call linkage additional network feature / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
ISO/IEC 21889 2001 Information technology - Telecommuncations and information exchangebetween systems - Private integrated services network - Inter-exchange signalling protocol - Callidentification and call linkage additional network feature / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
TELEVISION
IEC IEC/PAS 62261 2001 Television - Metadata dictionary structure / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2001.
TESTING CONDITIONS
ISO ISO 1986-1 2001 Test conditions for surface grinding machines with horizontal grinding wheel
spindle and reciprocating table - Testing of the accuracy - P.1: Machines with a table length of up to 1600 mm / By International Organization for Standardization (ISO). Geneva, ISO, 2001.
TEXTILES
BSI BS EN 1049-2 1994 Textiles - Woven fabrics - Construction - Methods of analysis - P.2:
Determination of number of threads per unit length / By British Standards Institution (BSI). London:BSI, 1994.
TISI Library Accession List Page 43
THERMISTORS
IEC IEC 60539-1 2002 Directly heated negative temperature coefficient thermistors - P.1: Generic
specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
THERMOPLASTIC POLYMERS
ISO ISO 294-5 2001 Plastics - Injection moulding of test specimens of thermoplastic materials - P.5:
Preparation of standard specimens for investigating anisotrop / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
THICKNESS MEASUREMENT
ISO ISO 13704 2001 Petroleum and natural gas industries - Calculation of heater-tube thickness in
petroleum refineries / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
TIN-PLATE JSA JIS Z1602 1995 18 liter metal cans / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TOLERANCES (MEASUREMENT)
ISO ISO 3290 2001 Rolling bearings - Balls - Dimensions and tolerances / By International
Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
TRANSLITERATION - TABLES (DATA) ISO ISO 15919 2001 Information and documentation - Transliteration of Devanagari and related Indic
scripts into Latin characters / By International Organization for Standardization (ISO). Geneva: ISO,2001.
TISI Library Accession List Page 44
TUMBLE DRIERS IEC IEC 60335-2-11 2002 Household and similar electrical appliances - Safety - P.2-11: Particular
requirements for tumble dryers / By International Electrotechnical Commission (IEC). 6th ed. - -Geneva: IEC, 2002.
TUNGSTEN JSA JIS Z3233 2001 Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and
welding / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TYPE (PRINTING) - DIMENSIONS JSA JIS Z8305 1962 Dimensions of Printing Types / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001.
TYRES ISO ISO 4209-2 2001 Truck and bus tyres and rims (metric series) - P.2: Rims / By International
Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
UNALLOYED STEELS ISO ISO 6932 2001 Cold-reduced carbon steel strip with a maximum carbon of 0,25% / By
International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
UNALLOYED STEELS - COLD-WORKING ISO ISO 6932 2001 Cold-reduced carbon steel strip with a maximum carbon of 0,25% / By
International Organization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 45
VEGETABLE FATS ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
VEGETABLE OILS ISO ISO 3960 2001 Animal and vegetable fats and oils - Determination of peroxide value / By
International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
VIBRATION MEASUREMENT ISO ISO 7919-2 2001 Mechanical vibration - Evaluation of machine vibration by measurements on
rotating shafts - P.2: Land-based steam turbines and generators in excess to 50 MW with normaloperating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
ISO 10816-2 2001 Mechanical vibration - Evaluation of machine vibration by measurements onnon-rotating parts - P.2: Land-based steam turbines and generators in excess to 50 MW with normaloperating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
VIBRATION TESTING ISO ISO 13355 2001 Packaging - Complete, filled transport packages and unit loads - Vertical random
vibration test / By International Organization for Standardization (ISO). Geneva: ISO, 2001.
ISO 10816-2 2001 Mechanical vibration - Evaluation of machine vibration by measurements onnon-rotating parts - P.2: Land-based steam turbines and generators in excess to 50 MW with normaloperating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2001.
TISI Library Accession List Page 46
VIDEO SIGNALS
IEC IEC 61603-6 2001 Transmission of audio and/or video and related signals using infra-red radiation
- P.6: Video and audio-visual signals / By International Electrotechnical Commission (IEC). GenevaIEC, 2001.
WATER EXTRACTORS (LAUNDRY) IEC IEC 60335-2-4 2002 Household and similar electrical appliances - Safety - P.2-4: Particular
requirements for spin extractors / By International Electrotechnical Commission (IEC). 5th ed. - -Geneva: IEC, 2002.
WATER PAINTS JSA,. JIS S6028 2001 Water colour paints / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
WATER TESTING ISO ISO 17495 2001 Water quality - Determination of selected nitrophenols - Method by solid-phase
extraction and gas chromatography with mass spectrometric detection / By International Organization forStandardization (ISO). Geneva: ISO, 2001.
WELDING ELECTRODES
JSA JIS Z3233 2001 Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and
welding / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
TISI Library Accession List Page 47
WELDING RODS
JSA JIS Z3201 2001 Gas welding rods for mild steel / By Japanese Standards Association (JSA).
Tokyo: JSA, 2001. JIS Z3316 2001 TIG welding rods and solid wires for mild steel and low alloy steel / By Japanese
Standards Association (JSA). Tokyo: JSA, 2001.
WHEEL RIMS ISO ISO 4209-2 2001 Truck and bus tyres and rims (metric series) - P.2: Rims / By International
Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO, 2001.
WHEELCHAIRS ISO ISO 10542-1 2001 Technical systems and aids for disabled or handicapped persons - Wheelchair
tiedown and occupant-restraint systems - P.1: Requirements and test methods for all systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
JSA JIS T9203 1999 Electric wheelchairs / By Japanese Standards Association (JSA). Tokyo: JSA, 2001.
WHEELCHAIRS - RESTRAINT SYSTEMS (PROTECTIVE)
ISO ISO 10542-1 2001 Technical systems and aids for disabled or handicapped persons - Wheelchair
tiedown and occupant-restraint systems - P.1: Requirements and test methods for all systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2001.
WIRE NETTING
JSA JIS Z8801-1 2000 Testing sieves - P.1: Test sieves of metal wire cloth / By Japanese Standards
Association (JSA). Tokyo: JSA, 2002.
TISI Library Accession List Page 48
JIS Z8801-2 2000 Test sieves - P.2: Test sieves of perforated metal plate / By Japanese StandardsAssociation (JSA). Tokyo: JSA, 2002.
WIRES ISO ISO 16120-1 2001 Non-alloy steel wire rod for conversion to wire - P.1: General requirements / By
International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-2 2001 Non-alloy steel wire rod for conversion to wire - P.2: Specific requirements for
general purpose wire rod / By International Organization for Standardization (ISO). Geneva: ISO, 2001. ISO 16120-4 2001 Non-alloy steel wire rod for conversion to wire - P.4: Specific requirements for
wire rod for special applications / By International Organization for Standardization (ISO). Geneva:ISO, 2001.
WIRES - CONVERSION ISO ISO 16120-1 2001 Non-alloy steel wire rod for conversion to wire - P.1: General requirements /
By International Organization for Standardization (ISO). Geneva: ISO, 2001.
WORK CERTIFICATES JSA JIS Z2305 2001 Non-destructive testing - Qualification and certification of personnel / By
Japanese Standards Association (JSA). Tokyo: JSA, 2001.
WOVEN FABRICS
BSI BS EN 1049-2 1994 Textiles - Woven fabrics - Construction - Methods of analysis - P.2:
Determination of number of threads per unit length / By British Standards Institution (BSI). London:BSI, 1994.
TISI Library Accession List Page 49
Alphabetical Subject Index
PageAcoustic signals 1Adhesive tape 1Adhesives 1After-sales services 1Aids for the disabled 1Air - Carbonyl compounds (inorganic) 2Air - Formaldehyde 2Air - Sampling methods 2Air - Work stations 2Air compressors - Petroleum refining 3Animal fats 3Animal oils 3Anthropometric characteristics 3Aperture cards 3Arc welding 4Aromatic compounds 4Aromatic compounds - Ethyl alcohol 4Artists equipment 4Axial-thrust bearings 5Balls (bearing components) 5Bars (materials) 5Bearings 6Biological analysis and testing 6Board (paper) 6Burst tests 6Cans 7
TISI Library Accession List Page 50
PageCast-iron 7Cements 7Channel flow 7Character sets 7Chemical analysis and testing 8Clothing sizes 8Coded character sets 8Communication networks 8Complete and filled packages 9Concentrates - Metals 9Concentrates -Testing 9Consumer protection 9Control systems 9Cooking appliances 9Covered electrodes 10Crayons 10Cutting tools 10Data media 10Damp-heat tests 10Determination of content - Ethyl alcohol 11Dimensional tolerances 11Dishwashing machines 11Drilling (mineral extraction) 11Electric cable systems 12Electric conduits 12Electric connectors - Cold tests 12Electric connectors - Corrosion tests 12Electric connectors - Damp-heat tests 13
TISI Library Accession List Page 51
PageElectric connectors - Dry-heat tests 13Electric connectors - Dynamic testing 13Electric connectors - Gas-tightness tests 13Electric connectors - Low-pressure tests 14Electric connectors - Mould growth inhibitors 14Electric connectors - Temperature measurement 14Electric connectors - Vibration testing 14Electric motors 15Electrical components - Classification systems 15Electrical household appliances 15Electrically-operated devices 16Error analysis 16Ethyl alcohol 16Extraction methods of analysis 16Fats - Peroxide number 17Fats - Liquid chromatography 17Filler wire 17Fire-resistant materials 17Flanges - Steels 18Flow measurement 18Fluids - Corrosion resistance 19Fluids - Fire-resistant materials 19Fluxes (materials) 19Fumes 19Gas analysis - Vocabulary 19Gas chromatography 20Gas tungsten-arc welding 20Gas welding 20
TISI Library Accession List Page 52
PageGas-shielded welding 20Gaseous fuels 21Graphic symbols 21Grinding machines 21Grinding wheels 21Hardness measurement 21Heat of reaction 21Hot-dip coating - Steels 22Hydration 22Ignitability - Fire tests 22Incinerators - Ships 22Inflatable boats 22Information exchange 23Inspectors 23Internal combustion engines - Vibration 23International standard book numbering 24International standard serial numbering 24Iron ores 24Irons 24Irons - Electrically-operated devices 24ISO publication 25Journal bearings 25Ladders - Insulated materials 25Ladies clothing 25Library and information science 26Lifting 26Link chains 26Liquid chromatography 26
TISI Library Accession List Page 53
PageLow-alloy steels 26Low-carbon steels 27Luminaires 27Magnetic compasses - Ships 27Management system 28Medical equipment 28Men clothing 28Metal coatings - Steels 28Microfilm 28Microwave ovens 29Motion-picture film 29Motor vehicles 29Motor vehicles - Control systems 29Multicore cables 29Non-destructive testing 29Numerical designations 30Oils 30Organic acids 30Packaging 31Passenger lifts 31Patient transport equipment 31Pencil sharpeners 31Penetration tests 31Peroxide number 32Petroleum refining 32Photographic images 32Photographic materials - Containers 32Pipes 33
TISI Library Accession List Page 54
PagePlain bearings 33Plastics 33Polyvinyl chloride 34Portland cement 34Powder metallurgy - Bulk modulus 34Pressure-sensitive materials 34Reinforced plastics - Specimen preparation 34Resins (natural) 35Restraint systems (protective) - Testing 35Road lighting 35Road vehicles 35Road vehicles - Electric connectors 35Road vehicles - Electrically-operated devices 36Rollers (bearing components) 36Rolling bearings 36Rotating electric machines 37Safety anchorages 37Screening equipment 37Service lifts 37Shaft (rotating) 38Sheet materials 38Soaps 38Solderability testing 38Soldering 38Solid fuels - Minerals 39Specimen preparation 39Standardization 39Standardization - Directories 39
TISI Library Accession List Page 55
PageStationery 39Statistical data 40Steels 40Sterilization (hygiene) 40Sterilization (hygiene) - Vocabulary 40Strips 41Styrene-butadine rubber 41Telecommunication 41Television 42Testing conditions 42Textiles 42Thermistors 43Thermoplastic polymers 43Thickness measurement 43Tin-plate 43Tolerances measurement 43Transliteration -Tables (data) 43Tumble driers 44Tungsten 44Type (printing) - Dimensions 44Tyres 44Unalloyed steels - Cold-working 44Vegetable fats 45Vegetable oils 45Vibration measurement 45Vibration testing 45Video signals 46Water extractors (laundry) 46
TISI Library Accession List Page 56
PageWater paints 46Water testing 46Welding electrodes 46Welding rods 47Wheel rims 47Wheelchairs 47Wheelchairs - Restraint systems (protective) 47Wire netting 47Wires 48Wires - Conversion 48Work certificates 48Woven fabrics 48
TISI Library Accession List Page 57
การสั่งซื้อมาตรฐาน
สํ านกังานมาตรฐานผลิตภัณฑอุตสาหกรรม (สมอ.) เปนสมาชิกผูแทนประเทศไทยในองคการระหวางประเทศวาดวยการมาตรฐาน (International Organization for Standardization - ISO) และเปนตัวแทนจ ําหนายมาตรฐานของ ISO และของประเทศสมาชิกดังรายชื่อที่แนบ
ผูสนใจจะสัง่ซือ้มาตรฐานขององคการระหวางประเทศวาดวยการมาตรฐาน (ISO) มาตรฐานของประเทศสมาชิก ISO โปรดติดตอสอบถามและสั่งซื้อไดที่
กองกจิกรรมมาตรฐานระหวางประเทศสํ านกังานมาตรฐานผลิตภัณฑอุตสาหกรรม
กระทรวงอุตสาหกรรมถนนพระราม 6 ราชเทวี
กรุงเทพ ฯ 10400โทรศัพท 0 2202 3502โทรสาร 0 2202 3511
TISI Library Accession List Page 58
รายช่ือสมาชิก1
องคการระหวางประเทศวาดวยการมาตรฐาน(International Organization for Standardization – ISO)2
Algeria Institut algerien de normalisation (IANOR)Argentina Instituto Argentino de Normalizacion (IRAM)
www.iram.com.arArmenia Department for Standardization, Metrology and Certification
(SARM)Australia Standards Australia International Ltd
www.standards.com.auAustria Austrian Standards Institute (ON)
www.on-norm.atBangladesh Bangladesh Standards and Testing Institute (BSTI)Barbados Barbados National Standards Institution (BNSI)Belarus Committee for Standardization, Metrology and Certification
(BELST)Belgium The Belgian Institution for Standardization (IBN)Bosnia and Herzegovina Institute for Standardization, Metrology and Patents of Bosnia
and Herzegovina (BASMP)www.bih.net.ba/-zsmp
Botswana Boswana Bureau of Standards (BOBS)Brazil Associacao Brasileira de Normas Tecnicas (ABNT)Bulgaria State Agency for Standardization and Metrology (BDS)
1 ISO member bodies2 Source > http://www.iso.ch/ (11/Oct/2001)
TISI Library Accession List Page 59
Canada Standards Council of Canada (SCC)www.scc.ca
Chile Instituto Nacional de Normalizacion (INN)www.inn.cl
China China State Bureau of Quality and Technical Supervision(CSBTS)www.csbts.cn.net
Colombia Instituto Colombiano de Normas Tecnicas y Certificacion(ICONTEC)www.icontec.org.co
Costa Rica Instituto de Normas Tecnicas de Costa Rica (INTECO)www.webspawner.com/users/inteco
Croatia State Office for Standardization and Metrology (DZNM)www.dznm.hr
Cuba Oficina Nacional de Normalizacion (NC)Cyprus Cyprus Organization for Standards and Control of Quality
(CYS)Czech Republic Czech Standards Institute (CSNI)
www.csni.czDenmark Dansk Standard (DS)
www.ds.dk/Ecuador Instituto Ecuatoriano de Normalizacion (INEN)
www.ecua.net.ec/inen/Egypt Egyptian Organization for Standardization and Quality Control
(EOS)Ethiopia Quality and Standards Authority of Ethiopian (QSAE)
TISI Library Accession List Page 60
Finland Finnish Standards Association (SFS)www.sfs.fi
France Association francaise de normalisation (AFNOR)www.afnor.fr
Germany Deutsches Institut fur Normung (DIN)www.din.de
Ghana Ghana Standards Board (GSB)Greece Hellenic Organization for Standardization (ELOT)
www.elot.grHungary Magyar Szabvanyugyi Testulet (MSZT)
www.mszt.huIceland Icelandic Council for Standardization (STRI)
www.stri.isIndia Bureau of Indian Standards (BIS)
www.bis.orgIndonesia Badan Standardisasi Nasional (BSN)
www.bsn.or.idIran, Islamic Republic of Institute of Standards and Industrial Research of Iran (ISIRI)
www.isiri.orgIraq Central Organization for Standardization and Quality Control
(COSQC)Ireland National Standards Authority of Ireland (NSAI)
www.nsai.ieIsrael The Standards Institution of Israel (SII)
www.sii.org.ilItaly Ente Nazionale Italiano di Unificazione (UNI)
TISI Library Accession List Page 61
www.uni.comJamaica Jamaica Bureau of Standards (JBS)
www.jbs.org.jmJapan Japan Industrial Standards Committee (JISC)
www.jisc.orgKazakhstan Committee for Standardization, Metrology and Certification
(KAZMEMST)www.memst.kz
Kenya Kenya Bureau of Standards (KEBS)www.kebs.org
Korea, Democratic People’s Rep of Committee for Standardization of the Democratic People’s Repof Korean (CSK)
Korea, Republic of Korean Agency for Technology and Standards (KATS)www.ats.go.kr
Kuwait Public Authority for Industry Standards and Industrial ServicesAffairs (KOWSMD)
Libyan Arab Jamahiriya Libyan National Centre for Standardization and Metrology(LNCSM)
Luxembourg Service de l'Energie de l'Etat, Organisme Luxembourgeois deNormalisation (SEE)www.etat.lu/see
Malaysia Department of Standards Malaysia (DSM)www.dsm.gov.my
Malta Malta Standards Authority (MSA)www.msa.org.mt
Mauritius Mauritius Standards Bureau (MSB)
TISI Library Accession List Page 62
Mexico Direccion General de Normas (DGN)www.secofi.gob.mx/normas/home.html
Mongolia Mongolian National Center for Standardization and Metrology(MNCSM)
Morocco Service de normalisation industrielle marocaine (SNIMA)www.mcinet.gov.ma
Netherlands Nederlands Normalisatie-Instituut (NEN)www.nel.nl
New Zealand Standards New Zealand (SNZ)www.standards.co.nz
Nigeria Standards Organisation of Nigeria (SON)Norway Norges Standardiseringsforbund (NSF)
www.standard.noPakistan Pakistan Standards Institution (PSI)Panama Comosion Panamena de Normas Industriales y Tecnicas
(COPANIT)www.mici.gob.pa
Philippines Bureau of Product Standards (BPS)www.dti.gov.ph/bps
Poland Polish Committee for Standardization (PKN)www.pkn.pl
Portugal Instituto Portugues da Qualidade (IPQ)www.ipq.pt/
Romania Institutul Roman de Standardizare (ASRO)Russian Federation State Committee of the Russian Federation for Standardization,
Metrology and Certification (GOST-R)
TISI Library Accession List Page 63
www.gost.ruSaudi Arabia Saudi Arabian Standards Organization (SASO)
www.saso.org.saSingapore Singapore Productivity and Standards Board (PSB)
www.psb.gov.sgSlovakia Slovak Institute for Standardization (SUTN)
www.sutn.gov.skSlovenia Standards and Metrology Institute (SIST)
www.usm.mzt.si/South Africa South African Bureau of Standards (SABS)
www.sabs.co.za/Spain AsociaciOn Espanola de Normalizacion y Certificacion
(AENOR)www.aenor.es
Sri Lanka Sri Lanka Standards Institution (SLSI)www.nsf.ac.lk/slsi/
Sweden Standardiseringen i Sverige (SIS)www.sis.se
Switzerland Swiss Association for Standardization (SNV)www.snv.ch
Syrian Arab Rep. Syrian Arab Organization for Standardization and Metrology(SASMO)
Tanzania, United Rep.of Tanzania Bureau of Standards (TBS)Thailand Thai Industrial Standards Institute (TISI)
www.tisi.go.thThe former Yugoslav Rep. of Macedonia Zavod za standardizacija i Metrologija (ZSM)
TISI Library Accession List Page 64
Trinidad and Tobago Trinidad and Tobago Bureau of Standards (TTBS)www.opus.co.tt/ttbs/
Tunisia Institut national de la normalisation et de la propriete(INNORPI)
Turkey Turk Standardlari Enstitusu (TSE)www.tse.org.tr
Ukraine State Committee of Ukraine for Standardization, Metrology andCertification (DSTU)
United Arab Emirates Directorate of Standardization and Metrology (SSUAE)www.uae.gov.ae
United Kingdom British Standards Institution www.bsi-global.comUnited States of America American National Standards Institute (ANSI)
www.ansi.orgUruguay Instituto Uruguayo de Normas Tecnicas (UNIT)
www.unit.org.uyUzbekistan Uzbek State Centre for Standardization, Metrology and
Certification (UZGOST)Venezuela Fondo para la Normalizacion y Certificacion de la Calidad
(FONDONORMA)www.fondonorma.org.ve
Viet Nam Directorate for Standards and Quality (TCVN)www.tcvn.gov.vn
Yugoslavia Savezni zavod za standardizaciju (SZS)Zimbabwe Standards Association of Zimbabwe (SAZ)
TISI Library Accession List Page 65