Post on 06-Aug-2020
TIBCO LogLogic® Visual AnalyticsInstallation GuideSoftware Release 2.0.0May 2014
Important Information | 2
Visual Analytics
Important Information
SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCHEMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (ORPROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDEDOR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCOSOFTWARE OR FOR ANY OTHER PURPOSE.
USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONSOF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSEAGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USERLICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THESOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARELICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATEDIN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSETERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND ANAGREEMENT TO BE BOUND BY THE SAME.
This document contains confidential information that is subject to U.S. and international copyright laws andtreaties. No part of this document may be reproduced in any form without the written authorization of TIBCOSoftware Inc.
TIBCO, Two-Second Advantage, and LogLogic are either registered trademarks or trademarks of TIBCOSoftware Inc. in the United States and/or other countries.
Enterprise Java Beans (EJB), Java 2 Platform Enterprise Edition (J2EE), Java Runtime Environment (JRE),Java Message Service (JMS), and all Java-based trademarks and logos are trademarks or registeredtrademarks of Oracle Corporation in the U.S. and other countries.
All other product and company names and marks mentioned in this document are the property of their respectiveowners and are mentioned for identification purposes only.
THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALLOPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THESAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON ASPECIFIC OPERATING SYSTEM PLATFORM.
THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILLBE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKEIMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED INTHIS DOCUMENT AT ANY TIME.
THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY ORINDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUTNOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.
Copyright © 2014 TIBCO Software Inc. ALL RIGHTS RESERVED.
TIBCO Software Inc. Confidential Information
TOC | 3
Visual Analytics
Contents
Preface...............................................................................................................................5Related Documentation....................................................................................................................... 6Typographical Conventions................................................................................................................. 7Connecting with TIBCO Resources.................................................................................................... 8
Chapter 1 Introduction............................................................................. 9TIBCO LogLogic Visual Analytics Overview....................................................................................... 9
How TIBCO LogLogic Visual Analytics Supports LMI Data................................................... 11TIBCO LogLogic Visualization Application Report Templates.......................................................... 11
Chapter 2 Installation............................................................................. 13Requirements.....................................................................................................................................13
Administrative Privileges.........................................................................................................14Supported Platforms............................................................................................................... 15Hardware Requirements......................................................................................................... 16TIBCO Software......................................................................................................................17TIBCO LogLogic Visual Analytics License Restrictions......................................................... 18Prerequisites.......................................................................................................................... 20
Installing TIBCO LogLogic Visual Analytics...................................................................................... 20Uninstalling TIBCO LogLogic Visual Analytics....................................................................... 21
Creating and Configuring the TIBCO LMI Database........................................................................ 21Creating and Configuring the TIBCO LLVA Database......................................................................21TIBCO LogLogic Visual Analytics Data Integration Tool...................................................................22
Configuring the TIBCO LogLogic Visual Analytics Data Integration Tool...............................23Configure LLVA Commands........................................................................................ 23
Import the TIBCO LogLogic Visual Analytics Library Package onto the TIBCO Spotfire Server......24Copying the TIBCO Visual Analytics Files to TIBCO Spotfire................................................26Importing the TIBCO LogLogic Visual Analytics Library Package..........................................27
Configuring the Data Source.............................................................................................................27Configuring In Database Connection................................................................................................ 28Opening the Visualization Application...............................................................................................29
Appendix A Check List.......................................................................... 31
TOC | 4
Visual Analytics
Visual Analytics
Preface
TIBCO LogLogic® Visual Analytics (LLVA) provides analytic solutions using the TIBCO Spotfire product.
TIBCO LogLogic Visual Analytics (LLVA) enables businesses to rapidly identify problems and find solutionshidden in the tidal wave of big machine data. From identifying data breaches to performing root causeanalysis of application performance issues, the answers are buried deep in log data. TIBCO LogLogicVisual Analytics delivers on the need to accelerate time-to-action for critical activities.
Preface | 6
Visual Analytics
Related Documentation
The following documents contain information about TIBCO LogLogic Visual Analytics:
• Release Notes — Provides specific release information including product information, new features andfunctionality, resolved issues, known issues, upgrade instructions, and any late-breaking information.
• TIBCO LogLogic Visual Analytics Installation Guide — Provides instructions for installing, configuring,and uninstalling TIBCO LogLogic Visual Analytics .
• Spotfire documentation — Spotfire documentation is located on the TIBCO Product Documentation sitehttp://docs.tibco.com.
Preface | 7
Visual Analytics
Typographical Conventions
Table 1: General Typographical Conventions
Convention Use
Bold font Indicates menu names, field names, button names, tab names and emphasis. Forexample: Click the Forwarding tab.
Code font Indicates file names, commands, and directory path. For example: <LLVA_HOME>\logs
italic font Italic font is used in the following ways:
• To indicate a document title. For example: See TIBCO LogLogic Visual AnalyticsInstallation and Configuration Guide.
• To define new terms. For example: A keystore is a database of keys and certificates.• To indicate a variable in a command or code syntax that you must replace. For
example: MyCommand pathname.
Keycombinations
Key name separated by a plus sign indicate keys pressed simultaneously. For example:Ctrl+C.
Key names separated by a comma and space indicate keys pressed one after theother. For example: Esc, Ctrl+Q.
The note icon indicates information that is of special interest or importance, forexample, an additional action required only in certain circumstances.
The tip icon indicates an idea that could be useful, for example, a way to apply theinformation provided in the current section to achieve a specific result.
The warning icon indicates the potential for a damaging situation, for example, data lossor corruption if certain steps are taken or not taken.
Preface | 8
Visual Analytics
Connecting with TIBCO Resources
How to Join TIBCOmmunity
TIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts. It is a placeto share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums,blogs, and access to a variety of resources. To register, go to http://www.tibcommunity.com.
How to Access TIBCO Documentation
After you join TIBCOmmunity, you can access the documentation here: http://docs.tibco.com.
How to Contact TIBCO Support
For comments or problems with this manual or the software it addresses, contact TIBCO Support asfollows:
• For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit thissite:
http://www.tibco.com/services/support
• To contact TIBCO LogLogic Support, visit this site:
https://support.tibco.com/loglogic.htm
Entry to this site requires a username and password. If you do not have a username, you can requestone.
Visual Analytics
Chapter
1Introduction
TIBCO LogLogic® Visual Analytics (LLVA) provides analytic solutions using the TIBCO Spotfire® productintegrated with the TIBCO LogLogic Log Management Intelligence (LMI) based Data Analytic products.
Topics
• TIBCO LogLogic Visual Analytics Overview• TIBCO LogLogic Visualization Application Report Templates
TIBCO LogLogic Visual Analytics Overview
The TIBCO LogLogic Analytics solution pulls log data collected by a LMI Appliance into a Microsoft SQLServer. Analytics can then be performed on the data through TIBCO Spotfire.
As shown below a minimum deployment requires two machines; one for the LMI appliance and onewindows machine installed with data mart/ETL and Spotfire. A typical deployment is shown below.
At a glance TIBCO LogLogic Visual Analytics provides:
• Dimension-Free Exploration — Interactively visualize data without requiring predefined dimensionsor constraints. In-memory data engine and "Data on Demand" capability uniquely enable users todynamically filter and drill down to micro-level details.
• Data mashups — Quickly combine many data sources without custom scripting and dynamically inserttables, rows, and columns into a single visual analysis -- all without IT support. Unique Data on Demandcapability enables users to interactively mash up or swap massive data sets to uncover insights maskedby data silos or aggregations.
• Contextual Collaboration — Instantly capture and securely share moments of insight across internaland external teams to drive collaborative decisions. Publish insights through collaborative bookmarks,guided analytic apps, corporate portals and social platforms to provide visually compelling context toaccelerate decision making processes.
TIBCO LogLogic Visual Analytics Overview | 10
Visual Analytics
BENEFITS
• Fastest to Actionable Insight — Instantly turn insight into action by enabling anyone to rapidly discoverhidden insights in your Machine Big Data and to quickly collaborate on those opportunities.
• Visibility into the Unknown — Discover unexpected insights hidden in your Machine Big Data and Real-Time Events to immediately identify strategic business opportunities or threats.
• Self-Service Discovery — Freely explore Machine Big Data to any level of detail, radically acceleratingdecision making and threat analysis, while dramatically reducing dependence on IT.
• Universal Adaptability — Leverage LogLogic Analytics' data discovery platform with data enrichment toempower anyone, anywhere, to make insightful decisions on Machine Big Data in context.
TIBCO LogLogic Visualization Application Report Templates | 11
Visual Analytics
How TIBCO LogLogic Visual Analytics Supports LMI Data
LMI collects data from various sources and places the parsed data into files, which are bulk inserted intothe relevant MySQL tables. LLVA can subscribe to these files and pull them periodically via sftp into thedata mart. Once a file has been successfully pulled in it is inserted into a MS-SQL table. Which TIBCOSpotfire reports can access to run visual analytics via TIBCO Spotfire's professional editor or via their Webreports.
TIBCO LogLogic Visualization Application ReportTemplates
LLVA 2.0.0 provides the following pre-configured Visualization Report Templates for Spotfire:
• Windows Events — displays Windows event information served during a specified time interval• User Access — displays data access and changes made to data during a specified time interval• User Authentication — displays identity and access related events during a specified time interval• Permission Modification — displays events related to permission modifications performed on user and
server objects• User Created/Deleted — displays user creation and deletion events• User Last Activity — displays user specific details and used to track user activity during a specified time
interval• File Access — displays individual file and directory events
TIBCO LogLogic Visualization Application Report Templates | 12
Visual Analytics
Visual Analytics
Chapter
2Installation
This section describes the steps required to integrate the TIBCO LogLogic and TIBCO Spotfire solutions.
Topics
• Requirements• Installing TIBCO LogLogic Visual Analytics• Creating and Configuring the TIBCO LMI Database• Creating and Configuring the TIBCO LLVA Database• TIBCO LogLogic Visual Analytics Data Integration Tool• Import the TIBCO LogLogic Visual Analytics Library Package onto the TIBCO Spotfire Server• Configuring the Data Source• Configuring In Database Connection• Opening the Visualization Application
Requirements
Before starting the installation procedure, review the topics in this section to determine that your systemmeets the basic requirements and that you have the prerequisite software installed.
• TIBCO LogLogic® Visual Analytics may only be used in conjunction with a TIBCO LogLogicLicensed Software;
• TIBCO LogLogic® Visual Analytics Additional Appliance License may only be used inconjunction with TIBCO LogLogic® Visual Analytics;
• The following Add-ons may only be used in conjunction with TIBCO LogLogic® Visual Analytics:
– TIBCO LogLogic® Analytics Analyst User Add-on– TIBCO LogLogic® Analytics Business Author User Add-on– TIBCO LogLogic® Analytics Consumer User Add-on
Requirements | 14
Visual Analytics
Administrative Privileges
You must have administrator privileges to access the following:
• LMIs CLI• Microsoft Windows Server hosting Microsoft SQL Server• Microsoft SQL Server
Requirements | 15
Visual Analytics
Supported Platforms
TIBCO LogLogic Visual Analytics supports installation on the following platforms:
Type Operating System
Microsoft WindowsServer
Microsoft Windows Server 2008 R2 64-bit
Microsoft Windows Server 2012 64-bit
Microsoft SQL Server Microsoft SQL Server 2008 R2 64-bit
Microsoft SQL Server 2012 and 64-bit
Microsoft SQL Server (Standard/Enterprise) 2008 R2 64-bit
Microsoft SQL Server (Standard/Enterprise) 2012 64-bit
Requirements | 16
Visual Analytics
Hardware Requirements
TIBCO LogLogic recommends the following specifications for any server used to host TIBCO LogLogicVisual Analytics.
Processor
• 2GHz or higher (recommended)• 2GHz (minimum)
System Memory
• 16 GB or more (recommended)• 8 GB (minimum)
Large data sets will require more RAM.
Disk Space Requirement
• 200 MB required to install the TIBCO LogLogic Visual Analytics Data Integration tool• 4 TB or more for database storage• 1TB minimum
Large data sets will require more storage.
Requirements | 17
Visual Analytics
TIBCO Software
TIBCO LogLogic Visual Analytics uses the following required and optional TIBCO components.
TIBCO Spotfire Components
• TIBCO Spotfire Server 5.5. or 6.0• TIBCO Spotfire Analyst 5.5. or 6.0• TIBCO Spotfire Consumer 5.5 or 6.0 (optional)• TIBCO Spotfire Business Author 5.5 or 6.0
If all TIBCO Spotfire solutions are run on one server more RAM, processor and database storagemay be required for large data sets.
TIBCO LogLogic Components
• TIBCO LogLogic LX/MX/Enterprise Virtual LMI Appliance 5.5.0 or later• TIBCO LogLogic Log Source Package (LSP 27 or later installed on LMI)
Requirements | 18
Visual Analytics
TIBCO LogLogic Visual Analytics License Restrictions
Please make note of the following license restrictions:
TIBCO LogLogic® Visual Analytics
TIBCO LogLogic® Visual Analytics may only be used in conjunction with a Unit of a TIBCO LogLogic®
Physical Appliance or Virtual Appliance. TIBCO LogLogic® Visual Analytics may analyze data collectedby the TIBCO LogLogic® Appliance on its own or together with data joined in from other products orapplications, but must always include data collected by the TIBCO LogLogic® Appliance in the resultsobtained.
TIBCO LogLogic® Visual Analytics: Additional Appliance License is required for each additional Unit ofa TIBCO LogLogic® Physical Appliance or Virtual Appliance and may only be used in conjunction withTIBCO LogLogic® Visual Analytics.
TIBCO LogLogic® Visual Analytics includes licenses for one Analyst named user, one Business Authornamed user and five Consumer named users as well as seven Spotfire Server named users. A TIBCOLogLogic® Analytics User Add-on for Analyst is required for each additional Analyst named user. A TIBCOLogLogic® Analytics Business Author Add-on for Business Author is required for each additional BusinessAuthor named user. A TIBCO LogLogic® Analytics Consumer User Add-on for Consumer is required foreach additional Consumer named user.
TIBCO LogLogic® Analytics User Add-on for Analyst, TIBCO LogLogic® Analytics Business Author Add-on for Business Author, or TIBCO LogLogic® Analytics Consumer User Add-on for Consumer may only beused in conjunction with TIBCO LogLogic® Visual Analytics."
TIBCO cannot directly or indirectly license or provide support for certain Spotfire products to any customerfor use in the Global Research Market ("GRM") and the Clinical Research Market ("CRM"). Please see thedefinitions link http://www.tibco.com/software/parametersdefinitions.jsp to get a complete description of thisrestriction.
TIBCO LogLogic® Visual Analytics: Additional Appliance License
• TIBCO LogLogic® Visual Analytics: Additional Appliance License may only be used in conjunction withTIBCO LogLogic® Visual Analytics and a TIBCO LogLogic product. LogLogic Visual Analytics mayanalyze data collected by the LogLogic systems on its own and together with data joined in from othersystems, but must always include LogLogic collected data in the results presented. It may not be usedto analyze non-LogLogic collected data on its own.
• Requires LogLogic Visual Analytics and a minimum set of LogLogic Data including at least one of thefollowing: LogLogic LX Appliance, LogLogic MX Appliance, Enterprise Virtual Appliance.
• This TIBCO LogLogic® Visual Analytics: Additional Appliance License is for use with only ONELogLogic LX, MX, or EVA. Customers must purchase an additional license for EACH additionalAppliance.
• TIBCO cannot directly or indirectly license or provide support for certain Spotfire products to anycustomer for use in the Global Research Market ("GRM") and the Clinical Research Market ("CRM").Please see the definitions link http://www.tibco.com/software/parametersdefinitions.jsp to get acomplete description of this restriction.
TIBCO LogLogic® Analytics Analyst User Add-on for Analyst
• TIBCO LogLogic® Analytics Analyst User Add-on for Analyst may only be used in conjunction withTIBCO LogLogic® Visual Analytics and a TIBCO LogLogic® product. TIBCO LogLogic® Visual Analyticsmay analyze data collected by the LogLogic systems on its own and together with data joined in fromother systems, but must always include LogLogic collected data in the results presented. It may not beused to analyze non-LogLogic collected data on its own.
• Requires LogLogic Visual Analytics and a minimum set of LogLogic Data including at least one of thefollowing: LogLogic LX Appliance, LogLogic MX Appliance, Enterprise Virtual Appliance.
Requirements | 19
Visual Analytics
• Includes one seat of Spotfire Analyst Named User and one Spotfire Server Named User.• There is no limit to the number of TIBCO LogLogic® Visual Analytics Users for Analyst a customer can
purchase as their use requires TIBCO LogLogic® Visual Analytics.• TIBCO cannot directly or indirectly license or provide support for certain Spotfire products to any
customer for use in the Global Research Market ("GRM") and the Clinical Research Market ("CRM").Please see the definitions link http://www.tibco.com/software/parametersdefinitions.jsp to get acomplete description of this restriction.
TIBCO LogLogic® Analytics Business Author User Add-on for Business Author
• TIBCO LogLogic® Analytics Business Author User Add-on for Business Author may only be used inconjunction with TIBCO LogLogic® Visual Analytics and a TIBCO LogLogic product. TIBCO LogLogic®
Visual Analytics may analyze data collected by the LogLogic systems on its own and together with datajoined in from other systems, but must always include LogLogic collected data in the results presented.It may not be used to analyze non-LogLogic collected data on its own.
• Requires LogLogic Visual Analytics and a minimum set of LogLogic Data including at least one of thefollowing: LogLogic LX Appliance, LogLogic MX Appliance, Enterprise Virtual Appliance.
• Includes one seat of Spotfire Business Author Named User and one Spotfire Server Named User.• There is no limit to the number of TIBCO LogLogic® Visual Analytics Users for Business Author a
customer can purchase as their use requires TIBCO LogLogic® Visual Analytics.• TIBCO cannot directly or indirectly license or provide support for certain Spotfire products to any
customer for use in the Global Research Market ("GRM") and the Clinical Research Market ("CRM").Please see the definitions link http://www.tibco.com/software/parametersdefinitions.jsp to get acomplete description of this restriction.
TIBCO LogLogic® Analytics Consumer User Add-on for Consumer
• TIBCO LogLogic® Analytics Consumer User Add-on for Consumer may only be used in conjunctionwith TIBCO LogLogic® Visual Analytics and a TIBCO LogLogic product. TIBCO LogLogic® VisualAnalytics may analyze data collected by the LogLogic systems on its own and together with data joinedin from other systems, but must always include LogLogic collected data in the results presented. It maynot be used to analyze non-LogLogic collected data on its own.
• Requires LogLogic Visual Analytics and a minimum set of LogLogic Data including at least one of thefollowing: LogLogic LX Appliance, LogLogic MX Appliance, Enterprise Virtual Appliance.
• Includes one seat of Spotfire Consumer Named User and one Spotfire Server Named User.• There is no limit to the number of TIBCO LogLogic® Visual Analytics Users for Consumer a customer
can purchase as their use requires TIBCO LogLogic® Visual Analytics.• TIBCO cannot directly or indirectly license or provide support for certain Spotfire products to any
customer for use in the Global Research Market ("GRM") and the Clinical Research Market ("CRM").Please see the definitions link http://www.tibco.com/software/parametersdefinitions.jsp to get acomplete description of this restriction.
Installing TIBCO LogLogic Visual Analytics | 20
Visual Analytics
Prerequisites
Prior to installing the TIBCO LogLogic Visual Analytics Data Integration tool, be sure that you havecompleted the following steps:
• LMI — configure an account as described in Creating and Configuring the TIBCO LMI Database onpage 21
• Oracle JDK 1.7• Oracle JRE 1.7 — http://www.oracle.com/technetwork/java/javase/downloads/index.html•
The above dependencies can be downloaded from the vendor's website.
Installing TIBCO LogLogic Visual Analytics
1. Copy the tibco-llva-2.0.0 application to your Windows server.
2. Start the TIBCO LogLogic Visual Analytics installer by running the tibco-llva-2.0.0 application.
3. Read the Introduction screen and click Next to continue.
4. Read the License Agreement agreement, and select the I Accept The Terms of The LicenseAgreement radio button. Click Next to continue.
5. The Choose Install Folder screen allows you to change the path for the installation folder. If required,change the installation folder path and click Next.
6. If required, change the location where you would like to create product icons and click Next.
7. Verify the values entered for installation in the Pre-Installation Summary screen, click Install tocomplete the installation.
8. When the installation is completed, click Done.
Creating and Configuring the TIBCO LMI Database | 21
Visual Analytics
Uninstalling TIBCO LogLogic Visual Analytics
1. Log in as Local Administrator.
2. From Start > Program Files > TIBCO > LogLogic Visual Analytics > Uninstaller > selectUninstaller.
3. From the Uninstall Analytics screen, click Uninstall.
4. Click Done to close the window.
5. Some files will not be removed, you will need to manually remove the following files:
– C:\TIBCO\LogLogic Visual Analytics\data– C:\TIBCO\LogLogic Visual Analytics\conf– C:\TIBCO\LogLogic Visual Analytics\logs
Creating and Configuring the TIBCO LMI Database
Create a new account on your LMI which will be used by the LLVA to access data.
1. As root connect to your LMI using SSH.
2. Configure a new account:>system data_client add <name>
3. Enter a password.
4. Confirm the password.
5. Exit.
Creating and Configuring the TIBCO LLVA Database
Install TIBCO LogLogic Visual Analytics first.
The SA account provided must have full SA privilege to the MASTER and MSDB databases.
The SQL Agent is required and must be running prior to creating the database.
1. Select C:\Program Files\TIBCO\LogLogic Visual Analytics\conf\database\mssql.
2. Open the create_llva_databases.bat file with a text editor.
3. Edit the following GLOBAL local environment variables:
– DBINSTANCE=<server>\LOGLOGIC– DBFILEPATH_CONFIG=<DATA_FILE_PATH>
– DBADMINNAME=sa– DBADMINPASSWORD=<ADMINPASSWORD>– SERVERDB_PASSWORD=<SERVERDB_PASSWORD>– PRIDBFILEPATH_RPT=<DATA_FILE_PATH>
4. To enable partitioning edit the following:
TIBCO LogLogic Visual Analytics Data Integration Tool | 22
Visual Analytics
– Set the PARTITION value to 1 (enabled).– Enter the file path for Even Weeks– Enter file path for Odd Weeks
Partitioning is only supported by MS SQL Server Enterprise and is a performanceoptimization for LLVA's database. This option should be considered when processing largeamounts of data.
5. Once configured Save your changes.
6. Double-click the create_llva_databases.bat file.
7. Open a CMD prompt and go to c:\Program Files\TIBCO\LogLogic Visual Analytics\bin.
8. Run the configure-llva dbconfig comand.This will install the database objects.
You will need to use the loglogic user and password created in create_llva_databases.bat.
For example: configure-llva dbconfig -u loglogic -p firevue -P 1069 -t.
9. Wait a few minutes and then check that the logappconfig and logapprtrpt databases have been createdsuccessfully before going to the next step.
10.Use tibco-llva restart command to restart the LLVA service.The LLVA can now be configured.
TIBCO LogLogic Visual Analytics Data Integration Tool
This section describes how to configure and run the TIBCO LogLogic Visual Analytics Data Integration tool.
TIBCO LogLogic Visual Analytics Data Integration Tool | 23
Visual Analytics
Configuring the TIBCO LogLogic Visual Analytics Data Integration Tool
The following steps describe how to configure LLVA to talk to the LMI.
1. Select Start>Command Prompt Command .
2. In the command window cd to your LogLogic Visual Analytics bin file.For example: C:\Program Files\TIBCO\LogLogic Visual Analytics\bin
3. Use the configure-llva create command to configure the following:
• -h <host name> — this is the LMI IP address or FQDN• -u<user> — the LMI account user• -p<password> — LMI password• -r<report tables>
For Example: C:\Program Files\TIBCO\LogLogic Visual Analytics\bin>configure-llva create -h10.20.30.86 -u llvauser1 -p llvaapp -r "Authentication,IDSLOG"
4. Select Enter.
5. Use the following command to view your selections:C:\Program Files\TIBCO\LogLogic Visual Analytics\bin>configure-llva list and select Enter.The following is an example of the result that would be returned:
id=lmi-1 type=lmi enable=true hostName=10.20.30.86 userName=llvauser1 configTables=null
reportTables=Authentication,IDSLOG
The LMI id can be used to update, remove, disable this connection. Please refer to Configure LLVACommands on page 23 for a detailed list of all the actions that can be taken using configure-llvacommand.
Configure LLVA CommandsThe following table provides a list of all the available configure-llva command options.
Command Description
configure-llva create This option allows users to create a LMI subscription.
-c configTables — List of LMI configuration tables separated bycommas.
-e enable — Options are True or False. Default is True.
-h hostname — Required, LMI host IP address or FQDN.
-p password — Required, LMI password.
-r report Tables — List of LMI report tables separated bycommas.
-u username — Required, LMI user name.
configure-llva update This option allows users to update a LMI collectionsubscription.
-c configTables — List of LMI configuration tables separated bycommas.
-e enable — Options are True or False. Default is True.
-h hostname — LMI host IP address or FQDN.
Import the TIBCO LogLogic Visual Analytics Library Package onto the TIBCO Spotfire Server | 24
Visual Analytics
Command Description
-i id — Required, subscription LMI id.
-p password — LMI password.
-r report Tables — List of LMI report tables separated bycommas.
-u username — LMI user name.
configure-llva remove Use to remove a LMI collection subscription.
-i id — Required, LMI collection subscription.
configure-llva list Use to list all available LMI collection subscriptions.
configure-llva enable Use to enable a LMI collection subscription.
-i id — Required, LMI collection subscription.
configure-llva disable Use to disable a LMI collection subscription.
-i id — Required, LMI collection subscription.
configure-llva test Use to test a LMI collection subscription.
-i id — Required, LMI collection subscription.
configure-llva status Used to display the current LMI collection status.
-i id — Required, LMI collection subscription.
configure-llva dbconfig Used to update the Sql Server configuration.
-p password — Required, Database server password.
-P port — The database server port. Default value is 1433.
-t test — Validate configuration before saving. Default value isfalse.
-u username — Required, Database server user name.
Import the TIBCO LogLogic Visual Analytics LibraryPackage onto the TIBCO Spotfire Server
The TIBCO LogLogic Visual Analytics Library Packages are provided as a part0.zip archive files and mustbe placed in a specific folder (or in its sub-folders) on the TIBCO Spotfire Server. This folder is called theShared Disk Location and is set from the TIBCO Spotfire Configuration Console. By default it is locatedon the TIBCO Spotfire Server machine under <server installation directory>\tomcat\application-data\library.
Refer to the TIBCO Spotfire Server - Importing to library Manual for more information about this importprocess.
TIBCO provides a pre-built visualization application as part of the Library Package for TIBCO Spotfire:
• LLVA <ReportCategory> M<Version>.part0.zip• LLVA <ReportCategory> D<Version>.part0.zip
Import the TIBCO LogLogic Visual Analytics Library Package onto the TIBCO Spotfire Server | 25
Visual Analytics
• LLVA Information Model.part0.zip
The Library files contain four main elements:
• LogLogic data model description• Spotfire Information Link necessary to access the data model• Data source IP address, credentials of the Data Analytics appliance(s)• Spotfire visualization applications Templates
Two types of Spotfire visualization application Templates are provided on using Spotfire In-Memorydata processing (these packages are designated with an 'M') and In-Database data processing(these packages are designated with a 'D'). The In-Database applications are provided for userswhose data set may exceed Spotfire In-Memory limit.
• LLVA <ReportCategory> M<Version>.part0.zip• LLVA <ReportCategory> D<Version>.part0.zip
Import the TIBCO LogLogic Visual Analytics Library Package onto the TIBCO Spotfire Server | 26
Visual Analytics
Copying the TIBCO Visual Analytics Files to TIBCO Spotfireuse the following task to copy the TIBCO LogLogic Visual Analytics Library package to your TIBCOSpotfire server.
1. From C:\Program Files\TIBCO\LogLogic Anyalytics\spotfire copy the following files:
– LLVA Access Control M 2.0.0.part0– LLVA Information Model part0– LLVA Storage System Activity M 2.0.0.part0– LLVA Access Control D 2.0.0.part0– LLVA Storage System Activity D 2.0.0.part0
2. Paste the copied files in the following folder, <server installation directory>\tomcat\application-data\library.Once the files have been copied onto the TIBCO Spotfire server, proceed to Importing the TIBCOLogLogic Visual Analytics Library Package on page 27 .
Configuring the Data Source | 27
Visual Analytics
Importing the TIBCO LogLogic Visual Analytics Library PackageOnce the zip files have been manually copied onto the Spotfire Server, they can be imported using theLibrary Administration tool available in the TIBCO Spotfire Analyst.
1. Log in to TIBCO Spotfire Analyst .
2. From the TIBCO Spotfire Analyst select Tools > Library Administration.
3. Click Import, then Browse and select LLVA Information Model.part0.
When importing the LLVA Information Model must be imported first.
4. Click OK.
5. Once the import is complete click Close.
6. Click Browse and select LLVA Access Control M 2.0.0.part0.
7. Click OK.
8. Once the import is complete click Close.
9. Click Browse and select LLVA Storage System Activity M 2.0.0.part0.
10.Click OK.
11.Click Browse and select LLVA Access Control D 2.0.0.part0.
12.Click OK.
13.Once the import is complete click Close.
14.Click Browse and select LLVA Storage System Activity D 2.0.0.part0.Click OK.
15.Once the import is complete click Close.
Configuring the Data Source
This section outlines how to configure the Data Source to connect to your Microsoft SQL ServerLOGLOGIC instance.
1. From TIBCO Spotfire select Tools > Information Designer.
2. In the Information Designer page select the Data Source tab.
3. Right-click on LOGLOGIC and select Edit.
4. Update the following fields to match your environment.
Configuring In Database Connection | 28
Visual Analytics
• Connection URL — Replace the existing database IP address and port with that of your MicrosoftSQL Server LOGLOGIC instance
Please be sure that you update the database port to match your environment. The port isfound after the IP and colon ':' in the connection URL
• Username — Enter the Microsoft SQL Server LOGLOGIC instance user name, the default isloglogic
• Password — Enter the Microsoft SQL Server LOGLOGIC instance password, the default is loglogic
5. Click Save.
Configuring In Database Connection
1. From TIBCO Spotfire select Tools > Manage Data Connections.
2. In Manage Data Connections double-click LLVA Information Model.
3. Double-click DB Connections.
4. Right-click on LLVA-in-DB-SQL-Server and select Edit Data Connection.
5. Click Skip.
6. Click on the Data Source Tab.
7. Click Settings.
8. From the top of the Data Source Settings window select Embed in Connection.
9. In the Login tab under Data source click Edit.
a) Update the Server IP and Port for your Database.
Opening the Visualization Application | 29
Visual Analytics
The Server IP and Port should be separated by a comma, for example: 10.60.2.123,1069.
b) From the Authentication method drop-down menu select SQL Server authentication.c) For UserName enter the loglogic account and password created during the LLVA database creation.d) Click Connect.e) Expand the Database drop-down menu and select logapprtrpt.f) Click OK.
10.From the top of the Data Source Settings window select Save to Library.
11.Browse to LLVA Information Model > DB Connections > LLVA Microsoft SQL Server.
12.Click Save and then click Yes to overwrite the existing file.
13.Click OK then click Save.
14.Right-click on LLVA Microsoft SQL Server and select Edit Connection Data Source.
15.Click Skip.
16.In the Login tab click on Edit.
a) Update the Server IP and Port for your database.b) For the UserName, use the loglogic account and password created during the LLVA database
creation.c) Click Connect and then click OK.
17.Click Save.
18.Click Close.
Opening the Visualization Application
This section describes how to open the LLVA visualization application templates.
1. From the library use the Open from Library button to open the TIBCO LogLogic VisualizationApplication from the library.
2. Select the visualization template and click Open.
3. Select the date range for the data set you would like to work with.
Opening the Visualization Application | 30
Visual Analytics
All LLVA report times are in UTC.
4. Click Finish.
Visual Analytics
Appendix
ACheck List
Installing TIBCO LogLogic Visual Analytics requires you to specify various parameters during installation.Therefore, it is a good idea to make sure you have all the information needed before starting installation. Use thechecklist below and write down the settings needed.
Item Examples / Default Values Your Values
Third-Party Prerequisites
1 Install JDK 1.7.
LMI Configuration Requirements
2 LLVA subscriber (for LMI)username
subscriber_1
3 LLVA subscriber (for LMI)password
4 LMI IP or FQDN
Microsoft SQL Configuration Requirements
5 Create a separate instance onyour MSSQL
<machine name>LOGLOGIC
6 IP or FQDN of the machineMSSQL is installed on
7 File path for the database C:\Microsoft SQL Server\MSSQL10_50.LOGLOGIC\MSSQL\DATA\
8 File path for the primary file group C:\Microsoft SQL Server\MSSQL10_50.LOGLOGIC\MSSQL\DATA\
9 Is data partitioning required? (0/1)
10 If partitioning is required - enterpath for even weeks
C:\Microsoft SQL Server\MSSQL10_50.LOGLOGIC\MSSQL\DATA\
11 If partitioning is required - enterpath for odd weeks
C:\Microsoft SQL Server\MSSQL10_50.LOGLOGIC\MSSQL\DATA\
12 MSSQL Admin user name sa
13 MSSQL Admin user password
Check List | 32
Visual Analytics
Item Examples / Default Values Your Values
14 LOGLOGIC instance user name loglogic
15 LogLogic instance user password
16 LOGLOGIC instance port number 1069
Spotfire Requirements
17 Spotfire admin user name spotfire
18 Spotfire admin user password
19 Location of the Spotfire reportlibraries
C:\tibco\tss\5.5.0\tomcat\application-data\library
20 Spotfire installation IP or FQN
21 Spotfire reports URL https://10.20.30.84:8080/SpotfireWeb
Useful Directories
1 TIBCO LogLogic Visual AnalyticsData Integration (LLVA DI) toollocation
C:\Program Files\TIBCO\LogLogicVisual Analytics
2 Use the following LLVA fileto start, stop, pause, resume,restart, install, remove or viewstatus.
C:\Program Files\TIBCO\LogLogicVisual Analytics\bin>tibco-llva
3 Access to LLVA DI tool C:\Program Files\TIBCO\LogLogicVisual Analytics\bin\configure-llva.bat
4 LLVA DI log location C:\Program Files\TIBCO\LogLogicVisual Analytics\logs
5 Location of Bl files /loglogic/data/client_queue/<SUBSCRIPTION USER >
6 Location of scripts used to createdatabase
C:\Program Files\TIBCO\LogLogicVisual Analytics\conf\database\mssql\create_llva_databases.bat
7 Spotfire app location C:\Program Files\TIBCO\LogLogicVisual Analytics\spotfire\*.zip
To be copied for import into Spotfire.
C:\tibco\tss\5.5.0\tomcat\application-data\library
8 Product version information C:\Program Files\TIBCO\LogLogicVisual Analytics\conf\build.properties
and Spotfire Apps home page
9 Product Documentation C:\Program Files\TIBCO\LogLogicVisual Analytics\docs
Check List | 33
Visual Analytics
Item Examples / Default Values Your Values
This folder only containsthe EULA. All productdocumentation can beaccessed from http://docs.tibco.com
Check List | 34
Visual Analytics