Post on 12-Jul-2020
The single pivot hinge for all applications: Selekta
2
Hallo Thomas, bei den Headlies bitte
unbedingt noch einmal den ZAB prüfen
(AT Vorspann) etc. Ich meine, er wäre final
kleiner geworden. Danke!
Impress your customers – with the versatile Selekta hinge.
The design of your furniture defines the technology. Not the other way round.Selekta provides a competent solution for virtually any mounting situation. Whether for individual pieces or furniture lines. A comprehensive range of hinges and perfected accessory items, such as a connector for glass doors, makes Selekta so versatile.
3
Hallo Thomas, bei den Headlies bitte
unbedingt noch einmal den ZAB prüfen
(AT Vorspann) etc. Ich meine, er wäre final
kleiner geworden. Danke!
4
Get new customers and sales potential.
You are familiar with Selekta as a hinge that has been tried and proven millions of times in office furniture. But Selekta can do much more: it comes with the best qualifications for use in hospitals, doctors' surgeries, schools, homes etc. Use Selekta hinges in tenders for securing contracts from public institutions.
You can also meet specific demands with Selekta, e.g.:· Elevated demands on corrosion in the laboratory: Selekta is also available with additional surface coating.
· Stringent demands on safety in nursery schools: The easy to mount finger guard makes Selekta even safer.
5
Always with a focus on your good name.
How do you get customers excited? With smart furniture that simplifies everyday work routine ... and with fittings that work reliably and require no maintenance - year after year. For a professional image we can also print your logo on the hinge's cover cap. This way, your customer is constantly reminded of your name and can recommend you to others.
6
With Hettich, you know you have a strong, reliable partner at your side. Because as a family owned company, we place an emphasis on continuity and a secure future. Use our many years of experience for your success.With Selekta, for instance, you can reduce your costs because following its extensive redesign, Selekta sets new standards in practical functionality:
· Incredibly fast installation from optimised clip connection between hinge and cup
· Less servicing after delivery because Selekta is low-maintenance and long lasting
· High customer satisfaction by quality "Made in Germany"
Our experience – your key to success
7
Avoid annoying complaints – they cost time and money and gnaw at your customers' satisfaction.For example: forgetting the third screw in the heat of final assembly means a high risk. Because then the hinge is not securely attached to the cabinet. With Selekta you can mount the third screw during production. This even ensures maximum stability before a piece of furniture leaves your premises.
Clever: the third screw is fixed through an oblong hole. Height adjustment travel can be used in full, allowing you to achieve perfect gap alignment even with the third screw already fastened.
Complaints? Not with Selekta.
8
Impressively engineered technology
Selekta makes your furniture look good.Often all it takes is a fraction of a millimetre: gaps that are not in perfect alignment impair the look of furniture and leave an impression of poor quality.Selekta provides maximum installation convenience in a minimum of time: turn the eccentric cam and see instant results! This saves you time perfecting door overlay and height.
Time is money: reduce your assembly costs.Selekta hinges can be fitted quickly, without any tools or major effort. The new clip connection provides unequalled smooth action, strength and stability. Installation mistakes are virtually ruled out. Uncompromising safety: The correct installation is confirmed to the fitter by the unique catch indicator.
9
Practical added value – day after day: Selekta
Convincing sales points! Selekta gives you and your customer genuine added value:1. Selekta lets you create high quality cabinets at low
cost. Because compared with other door opening systems, fittings for hinged doors are inexpensive and are quick to install.
2. Your customer can look forward to low running costs. Because Selekta is a sturdy, maintenance free and long lasting product that provides years of reliable service.
3. Selekta also comes with many practical benefits as shown by the following examples.
10
Making optimum use of valuable storage space Selekta helps to optimise the use of storage space. Whether your customer only wants to store files or provide ergonomic organisation at the workplace, e.g. with pull out suspension filing system: full use can always be made of the cabinet's interior width. The extremely slim line Selekta hinge arm never gets in the way.
Finding things faster, accessing them more easily Selekta provides an unobstructed view of a cabinet's entire interior: everything directly accessible all day long – making work much easier! Because Selekta lets you swing doors round to meet the side of the cabinet. This way, they neither restrict movement at the desk nor do they get in the way in front of the cabinet. How do they do that? The pivot point of the Selekta hinge is outside the door and permits an opening angle of up to 270°.
Practical added value – day after day: Selekta
11
Meeting various demands with one hingeFirst and foremost, office furniture needs to be practical. But also prestigious – when it stands on the executive floor or in the reception area. This is where you can make statements with select materials, like glass for example.And Selekta does a first class job here too: because one and the same Selekta hinge not only makes it possible to use engineered wood in all common thicknesses as a material for cabinet doors, but also glass. Complemented by the stylish glass door decorative caps ... for a look of elegance!
Working efficiently in peace and quietFurniture doors that close gently and quietly: this feel of luxury has long been standard in kitchen and living room furniture. And at work? This is where banging doors disturb work concentration and efficiency all the more. The answer comes with Selekta: the optional Silent System makes furniture doors whisper quiet at the turn of a hand. Can also be added to existing cabinets.
1212 www.hettich.com
Selekta is system based: always the right hinge!
Save costs by keeping inventory lean!
Selekta hinge cups: always the right choice!
= +
Selekta 4Selekta Pro 2000 Selekta Pro 2035
Single pivot hingeSystem description
· Entry level product· Slide on installation of base hinge and cup· Height adjustment and overlay adjustment by oblong hole
· Main product in a comprehensive line up for various door mounting situations
· Time saving, tool-less clip on installation of base hinge and hinge cup
· Easy height adjustment and overlay adjustment by eccentric cam
· The most common product options are also available with an attractive surface finish: for use in areas with exacting demands on corrosion protection, e.g. in fitting out laboratories.
· Exclusive, designer style solution with con-cealed knuckle: comes with the benefits of a single pivot hinge yet hardly visible on the outside
· Time saving, tool-less clip on installation for base hinge and hinge cup
· Easy height adjustment by eccentric cam
You only need a few combinable components from the cleverly configured Selekta system. This simplifies work flows and keeps your inventory lean.
And yet you can still meet your customers' specific preferences.
Hinge = cup + base hinge
The Selekta line up provides numerous options at base hinge level. In the Selekta system you will find the right solution for the most common material thicknesses, construction principles and door mounting styles. Various attachment methods, different hole spacings ... always the ideal hinge for your process.
Uncomplicated in production and undemand-ing in stock keeping because: the same cup can always be used for different mounting styles!And just like the base hinges, the hinge cups adapt to your production because they are available with various hole patterns and
attachment methods and can also be combined in a variety of ways with the different versions of the base hinges.
1313Technik für Möbel
Corner hinges for various side panel thicknesses with knuckle flush with the carcase edge
Carcase side thickness 16 mm 18 mm 19 mm 19 mm 19 mm
Reveal 4 mm 4 mm 8 mm * 4 mm 3 mm
Hinge for overlay 12 mm 14 mm 11 mm 15 mm 16 mm
Knuckle cranked, ø 5.4 mm cranked, ø 5.4 mm straight, ø 7 mm cranked, ø 5.4 mm cranked, ø 5.4 mm
Drawing
4
16
Design principle for carcase constructions
Design principle for wall to wall constructions
4
18
8
19
4
19
3
19
* matches corner and twin hinge for 5.5 mm overlay (see below)
Corner and twin hinges with knuckle centred in front of the carcase side
Carcase side thickness 19 mm 19 mm 19 mm 19 mm
Reveal 8 mm 8 mm 6 mm 6 mm
Hinge for overlay 5.5 mm 5.5 mm twin 6.5 mm 6.5 mm twin
Knuckle straight, ø 7 mm straight, ø 7 mm straight, ø 5.4 mm straight, ø 5.4 mm
Drawing
8
19
6
19
6
19
8
19
Single pivot hinge with knuckleSystem description Selekta Pro 2000
1414 www.hettich.com
Selekta Pro 2000 Selekta Pro 2000 twin hinge Selekta Pro 2000 E
32 - 35Page
Opening angle
Hole line hole spacing
Door overlay
Colour
Door adjustment
Description
Installation
Hinge cup mounting
Installation of base hinge
Optional features
16 - 27 28 - 31
Single pivot hingeSelekta Range summary / Technical comparison
Up to 270°
32 mm / 25 mm
5.5 mm / 6.5 mm / 11 mm / 12 mm / 14 mm / 15 mm / 16 mm
Nickel platedBlack
2 dimensional
Silent System Decorative cap for glass door
connection Opening angle limiter Garment guardFinger guardCover cap
Corner hinge for overlay and half overlay doors
With visible knuckle With self closing feature
Clip on installation
Screw on Press in
With premounted expanding sockets and fixing screws
For screw mounting with Euro screws
Up to 180°
32 mm / 25 mm
5.5 mm / 6.5 mm
Nickel plated
2 dimensional
Silent System Decorative cap for glass door
connectionCover cap
Twin hinge for half overlay doors
With visible knuckle With self closing feature
Clip on installation
Screw on Press in
With premounted expanding sockets and fixing screws
For screw mounting with Euro screws
Up to 224°
Reveal 3.2 mm
Nickel plated
2 dimensional
Silent System Decorative cap for glass door
connection Opening angle limiterCover cap
Corner hinge for inset doors With visible knuckle With self closing feature
Clip on installation
Screw on Press in
With premounted expanding sockets and fixing screws
For screw mounting with Euro screws
32 mm / 25 mm
1515Technik für Möbel
Selekta Pro 2035
36 - 39
Selekta 4
40 - 41 42 - 43
Selekta 4 twin hinge
Up to 115°
32 mm / 25 mm
15 mm
Nickel plated
2 dimensional
Silent System Decorative cap for glass door
connectionCover cap
Corner hinge for overlay doors
With concealed knuckle With self closing feature
Clip on installation
Screw on Press in
With premounted expanding sockets and fixing screws
For screw mounting with Euro screws
Up to 270°
32 mm
5.5 mm / 11 mm
Nickel plated
2 dimensional
Decorative cap for glass door connection
Opening angle limiter
Corner hinge for overlay and half overlay doors
With visible knuckle With self closing feature
Slide on installation
Screw on Press in
For screw mounting with Euro screws
Up to 180°
32 mm
5.5 mm
Nickel plated
2 dimensional
Twin hinge for half overlay doors
With visible knuckle With self closing feature
Slide on installation
Screw on Press in
For screw mounting with Euro screws
Decorative cap for glass door connection
16 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
7
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 900 9 037 900 9 037 900 9 037 900 9 037 900 9 037 900 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 895 9 037 895 9 037 895 9 037 895 9 037 895 9 037 895 200 ea.
5,4
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 248 9 037 248 9 037 248 9 037 248 9 037 248 9 037 248 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 246 9 037 246 9 037 246 9 037 246 9 037 246 9 037 246 200 ea.
7
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 909 9 037 909 9 037 909 9 037 909 9 037 909 9 037 909 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 906 9 037 906 9 037 906 9 037 906 9 037 906 9 037 906 200 ea.
5,4
16
16 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expandingø 5 x 11 drill hole with Base
hinge 9 022 302 9 022 302 9 022 302 9 022 302 9 022 302 9 022 302 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 298 9 022 298 9 022 298 9 022 298 9 022 298 9 022 298 200 ea.
Selekta Pro 2000
Overlay 5.5 mm
Overlay 6.5 mm
Overlay 11 mm
Overlay 12 mm
5,5
52
12,5
ø 35ø x T
9,5
45
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Hinge = cup + base hinge
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
17Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
12
15 270° 268° 266° 258° 250° 4.016 270° 266° 263° 255° 248° 4.018192225
5.5
15 268° 265° 260° 258° 251° 244° 7.516 265° 263° 258° 255° 248° 242° 7.518 245° 245° 245° 245° 244° 238° 7.519 225° 225° 225° 225° 225° 225° 7.522 191° 191° 191° 191° 191° 191° 7.525 185° 185° 185° 185° 185° 185° 9.0
Max. overlay: 5.5 mmMin. overlay: 3.5 mm (adjustment)Hinge base: 13 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 140°
6.5
15 268° 265° 260° 258° 251° 244° 5.716 265° 263° 258° 255° 248° 242° 5.718 255° 255° 253° 250° 244° 238° 5.719 229° 229° 229° 229° 229° 229° 5.722 187° 187° 187° 187° 187° 187° 5.725 183° 183° 183° 183° 183° 183° 8.0
Max. overlay: 6.5 mmMin. overlay: 4.5 mm (adjustment)Hinge base: 12.2 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 143°
11
15 270° 264° 257° 7.516 270° 262° 254° 7.518 245° 245° 245° 7.519 225° 225° 225° 7.522 191° 191° 191° 7.525 185° 185° 185° 9.0
Max. overlay: 11 mmMin. overlay: 9 mm (adjustment)Hinge base: 18.5 mmOverall height: 10 mmDoor protrusion: 5 mmOpening angle for 0 mm door protrusion: 121°
Max. overlay: 12 mmMin. overlay: 10 mm (adjustment)Hinge base: 16 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 132°
90°
Overall height
Door protrusion
Minimum reveal
1,25,3
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
18 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
7
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 898 9 037 898 9 037 898 9 037 898 9 037 898 9 037 898 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 885 9 037 885 9 037 885 9 037 885 9 037 885 9 037 885 200 ea.
5,4
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 247 9 037 247 9 037 247 9 037 247 9 037 247 9 037 247 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 245 9 037 245 9 037 245 9 037 245 9 037 245 9 037 245 200 ea.
7
19
19 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 907 9 037 907 9 037 907 9 037 907 9 037 907 9 037 907 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 903 9 037 903 9 037 903 9 037 903 9 037 903 9 037 903 200 ea.
5,4
16
16 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 300 9 022 300 9 022 300 9 022 300 9 022 300 9 022 300 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 296 9 022 296 9 022 296 9 022 296 9 022 296 9 022 296 200 ea.
Selekta Pro 2000
Overlay 5.5 mm
Overlay 6.5 mm
Overlay 11 mm
Overlay 12 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
19Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
12
15 270° 268° 266° 258° 250° 4.016 270° 266° 263° 255° 248° 4.018192225
5.5
15 268° 265° 260° 258° 251° 244° 7.516 265° 263° 258° 255° 248° 242° 7.518 245° 245° 245° 245° 244° 238° 7.519 225° 225° 225° 225° 225° 225° 7.522 191° 191° 191° 191° 191° 191° 7.525 185° 185° 185° 185° 185° 185° 9.0
Max. overlay: 5.5 mmMin. overlay: 3.5 mm (adjustment)Hinge base: 13 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 140°
6.5
15 268° 265° 260° 258° 251° 244° 5.716 265° 263° 258° 255° 248° 242° 5.718 255° 255° 253° 250° 244° 238° 5.719 229° 229° 229° 229° 229° 229° 5.722 187° 187° 187° 187° 187° 187° 5.725 183° 183° 183° 183° 183° 183° 8.0
Max. overlay: 6.5 mmMin. overlay: 4.5 mm (adjustment)Hinge base: 12.2 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 143°
11
15 270° 264° 257° 7.516 270° 262° 254° 7.518 245° 245° 245° 7.519 225° 225° 225° 7.522 191° 191° 191° 7.525 185° 185° 185° 9.0
Max. overlay: 11 mmMin. overlay: 9 mm (adjustment)Hinge base: 18.5 mmOverall height: 10 mmDoor protrusion: 5 mmOpening angle for 0 mm door protrusion: 121°
Max. overlay: 12 mmMin. overlay: 10 mm (adjustment)Hinge base: 16 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 132°
90°
Overall height
Door protrusion
Minimum reveal
1,25,3
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
20 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
16 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 311 9 022 311 9 022 311 9 022 311 9 022 311 9 022 311 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 307 9 022 307 9 022 307 9 022 307 9 022 307 9 022 307 200 ea.
5,4
19
18 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 040 636 9 040 636 9 040 636 9 040 636 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 040 651 9 040 651 9 040 651 9 040 651 200 ea.
5,4
19
19 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 308 9 022 308 9 022 308 9 022 308 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 299 9 022 299 9 022 299 9 022 299 200 ea.
5,4
19
19 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 312 9 022 312 9 022 312 9 022 312 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 303 9 022 303 9 022 303 9 022 303 200 ea.
Selekta Pro 2000
Overlay 12 mm
Overlay 15 mm
Overlay 14 mm
Overlay 16 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
21Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
12
15 272° 271° 270° 266° 259° 4.016 272° 270° 270° 264° 257° 4.018 270° 269° 266° 259° 252° 4.019 270° 266° 264° 257° 250° 4.02225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 12 mmMin. overlay: 10 mm (adjustment)Hinge base: 16 mmOverall height: 10 mmDoor protrusion: 9 mm Opening angle for 0 mm door protrusion: 140°
15
15 272° 270° 265° 4.016 271° 270° 263° 4.018 270° 265° 258° 4.019 270° 263° 256° 4.02225
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 129°
16
15 272° 270° 266° 3.016 272° 270° 264° 3.018 270° 266° 259° 3.019 270° 264° 257° 3.02225
Max. overlay: 16 mmMin. overlay: 14 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 132°
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
14
15 272° 272° 270° 264° 4.016 272° 271° 269° 261° 4.018 270° 270° 264° 257° 4.019 270° 269° 261° 255° 4.02225
Max. overlay: 14 mmMin. overlay: 12 mm (adjustment)Hinge base: 18 mmOverall height: 10 mmDoor protrusion: 7 mm Opening angle for 0 mm door protrusion: 133°
22 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
Selekta Pro 2000
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
16 Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 309 9 022 309 9 022 309 9 022 309 9 022 309 9 022 309 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 305 9 022 305 9 022 305 9 022 305 9 022 305 9 022 305 200 ea.
5,4
19
18 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 040 756 9 040 756 9 040 756 9 040 756 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 040 755 9 040 755 9 040 755 9 040 755 200 ea.
5,4
19
19 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 306 9 022 306 9 022 306 9 022 306 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 297 9 022 297 9 022 297 9 022 297 200 ea.
5,4
19
19 Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 022 310 9 022 310 9 022 310 9 022 310 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 022 301 9 022 301 9 022 301 9 022 301 200 ea.
Overlay 12 mm
Overlay 15 mm
Overlay 14 mm
Overlay 16 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
23Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
12
15 272° 271° 270° 266° 259° 4.016 272° 270° 270° 264° 257° 4.018 270° 269° 266° 259° 252° 4.019 270° 266° 264° 257° 250° 4.02225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 12 mmMin. overlay: 10 mm (adjustment)Hinge base: 16 mmOverall height: 10 mmDoor protrusion: 9 mm Opening angle for 0 mm door protrusion: 140°
15
15 272° 270° 265° 4.016 271° 270° 263° 4.018 270° 265° 258° 4.019 270° 263° 256° 4.02225
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 129°
16
15 272° 270° 266° 3.016 272° 270° 264° 3.018 270° 266° 259° 3.019 270° 264° 257° 3.02225
Max. overlay: 16 mmMin. overlay: 14 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 132°
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
14
15 272° 272° 270° 264° 4.016 272° 271° 269° 261° 4.018 270° 270° 264° 257° 4.019 270° 269° 261° 255° 4.02225
Max. overlay: 14 mmMin. overlay: 12 mm (adjustment)Hinge base: 18 mmOverall height: 10 mmDoor protrusion: 7 mm Opening angle for 0 mm door protrusion: 133°
24 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
Selekta Pro 2000
52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
19 Cup 9 039 609 9 039 618 9 020 471 9 040 012 200 ea.
Expanding socketsø 5 x 11 drill hole with Base hinge 9 047 042 9 047 042 9 047 042 9 047 042 200 ea.
Cup 9 039 609 9 039 618 9 020 471 9 040 012 200 ea.
Screw on, ø 5 x 11 drill hole with Base hinge 9 039 309 9 039 309 9 039 309 9 039 309 200 ea.
Overlay 15 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, black coated
25Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 32
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
15
15 272° 270° 265° 4.016 271° 270° 263° 4.018 270° 265° 258° 4.019 270° 263° 256° 4.02225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 129°
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
26 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
Selekta Pro 2000
52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
19 Cup 9 039 609 9 039 618 9 020 471 9 040 012 200 ea.
Expanding socketsø 5 x 11 drill hole with Base hinge 9 039 512 9 039 512 9 039 512 9 039 512 200 ea.
Cup 9 039 609 9 039 618 9 020 471 9 040 012 200 ea.
Screw on, ø 5 x 11 drill hole with Base hinge 9 039 308 9 039 308 9 039 308 9 039 308 200 ea.
Overlay 15 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, black coated
27Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 For System 25
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
15
15 272° 270° 265° 4.016 271° 270° 263° 4.018 270° 265° 258° 4.019 270° 263° 256° 4.02225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 19 mmOverall height: 10 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 129°
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
28 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 twin hinge For System 32
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
7
19
19Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 915 9 037 915 9 037 915 9 037 915 9 037 915 9 037 915 100 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 912 9 037 912 9 037 912 9 037 912 9 037 912 9 037 912 100 ea.
5,4
19
19Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 265 9 037 265 9 037 265 9 037 265 9 037 265 9 037 265 100 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 263 9 037 263 9 037 263 9 037 263 9 037 263 9 037 263 100 ea.
Selekta Pro 2000 twin hinge
Overlay 6.5 mm
Overlay 5.5 mm
Hinge = 2 cups + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot twin hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
29Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 twin hinge For System 32
Opening angle and minimum reveal (depending on thickness of door and side panels)
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
5.5
15 180° 180° 180° 180° 180° 180° 7.516 180° 180° 180° 180° 180° 180° 7.518 180° 180° 180° 180° 180° 180° 7.519 180° 180° 180° 180° 180° 180° 7.522 126° 126° 126° 126° 126° 126° 7.525
Max. overlay: 5.5 mmMin. overlay: 3.5 mm (adjustment)Hinge base: 26 mmOverall height: 10 mmDoor protrusion: 10.5 mm Opening angle for 0 mm door protrusion: 140°
6.5
15 180° 180° 180° 180° 180° 180° 5.716 180° 180° 180° 180° 180° 180° 5.718 180° 180° 180° 180° 180° 180° 5.719 180° 180° 180° 180° 180° 180° 5.722 112° 112° 112° 112° 112° 112° 5.725
Max. overlay: 6.5 mmMin. overlay: 4.5 mm (adjustment)Hinge base: 25 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 143°
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
Doorthickness
30 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 twin hinge For System 25
Selekta Pro 2000 twin hinge
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
7
19
19Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 914 9 037 914 9 037 914 9 037 914 9 037 914 9 037 914 100 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 910 9 037 910 9 037 910 9 037 910 9 037 910 9 037 910 100 ea.
5,4
19
19Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 264 9 037 264 9 037 264 9 037 264 9 037 264 9 037 264 100 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 261 9 037 261 9 037 261 9 037 261 9 037 261 9 037 261 100 ea.
Overlay 6.5 mm
Overlay 5.5 mm
Hinge = 2 cups + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot twin hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
31Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 twin hinge For System 25
Opening angle and minimum reveal (depending on thickness of door and side panels)
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
5.5
15 180° 180° 180° 180° 180° 180° 7.516 180° 180° 180° 180° 180° 180° 7.518 180° 180° 180° 180° 180° 180° 7.519 180° 180° 180° 180° 180° 180° 7.522 126° 126° 126° 126° 126° 126° 7.525
Max. overlay: 5.5 mmMin. overlay: 3.5 mm (adjustment)Hinge base: 26 mmOverall height: 10 mmDoor protrusion: 10.5 mm Opening angle for 0 mm door protrusion: 140°
6.5
15 180° 180° 180° 180° 180° 180° 5.716 180° 180° 180° 180° 180° 180° 5.718 180° 180° 180° 180° 180° 180° 5.719 180° 180° 180° 180° 180° 180° 5.722 112° 112° 112° 112° 112° 112° 5.725
Max. overlay: 6.5 mmMin. overlay: 4.5 mm (adjustment)Hinge base: 25 mmOverall height: 10 mmDoor protrusion: 10.5 mmOpening angle for 0 mm door protrusion: 143°
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Minimum reveal
5,3 1,2
13
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
Doorthickness
32 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 E For System 32, for inset doors
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Reveal mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 256 9 037 256 9 037 256 9 037 256 9 037 256 9 037 256 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 251 9 037 251 9 037 251 9 037 251 9 037 251 9 037 251 200 ea.
Selekta Pro 2000 E
Reveal 3.2 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric reveal adjustment + 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
33Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 E For System 32, for inset doors
Opening angle and minimum reveal (depending on thickness of door and side panels)
3.2
15 224° 222° 218° 217° 212° 209° 3.216 219° 217° 213° 212° 208° 205° 3.218 207° 205° 203° 202° 199° 197° 3.219 201° 200° 198° 197° 195° 193° 3.22225
Reveal mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Min. reveal: 3.2 mmMax. reveal: 5.2 mm (adjustment)Hinge base: 0 mm Overall height: 15 mmDoor protrusion: 25 mm
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Door reveal
13
5,3
4
19
2
Side panel
Hole line distance 57
34 www.hettich.com
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 E For System 25, for inset doors
Selekta Pro 2000 E
52 x 5.5 mm drilling pattern 52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTH 32
Press inTH 33
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Reveal mm
Mounting Drill hole
Self closing feature
Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
5,4
19
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base
hinge 9 037 254 9 037 254 9 037 254 9 037 254 9 037 254 9 037 254 200 ea.
Cup 1 083 438 1 080 574 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw onø 5 x 11 drill hole with Base
hinge 9 037 250 9 037 250 9 037 250 9 037 250 9 037 250 9 037 250 200 ea.
Reveal 3.2 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
5,5
52
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Knuckle length 39 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Integrated eccentric reveal adjustment + 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
35Technik für Möbel
Single pivot fast assembly hinge with visible knuckle Selekta Pro 2000 E For System 25, for inset doors
Opening angle and minimum reveal (depending on thickness of door and side panels)
3.2
15 224° 222° 218° 217° 212° 209° 3.216 219° 217° 213° 212° 208° 205° 3.218 207° 205° 203° 202° 199° 197° 3.219 201° 200° 198° 197° 195° 193° 3.22225
Reveal mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Min. reveal: 3.2 mmMax. reveal: 5.2 mm (adjustment)Hinge base: 0 mm Overall height: 15 mmDoor protrusion: 25 mm
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Door reveal
13
5,3
4
19
2
Side panel
Hole line distance 57
36 www.hettich.com
Single pivot fast assembly hinge with concealed knuckle Selekta Pro 2035 For System 32
Selekta Pro 2035
52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
19
19Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base hinge 9 037 328 9 037 328 9 037 328 9 037 328 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw on, ø 5 x 11 drill hole with Base hinge 9 037 323 9 037 323 9 037 323 9 037 323 200 ea.
Overlay 15 mm
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
Clip on single pivot hinge with concealed knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Base hinge including 3rd fixing screw Integrated overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
37Technik für Möbel
Single pivot fast assembly hinge with concealed knuckle Selekta Pro 2035 For System 32
Opening angle and minimum reveal (depending on thickness of door and side panels)
15
15 115° 115° 115° 115° 0.916 115° 115° 115° 115° 1.118 115° 115° 115° 115° 5.019 115° 115° 115° 115° 6.42225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 14 mm Overall height: 10 mmDoor protrusion: 0.7 mm
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Minimum reveal
1,2
13
12
Side panel
Overlay max.
Hole line distance 37
Hinge basemin. R 2
Doorthickness
38 www.hettich.com
Single pivot fast assembly hinge with concealed knuckle Selekta Pro 2035 For System 25
Selekta Pro 2035
52 x 9 mm drilling pattern 45 x 9.5 mm drilling pattern
Screw onTX 32 / 52 x 9
Press inTX 33 / 52 x 9
Screw onTB 32
Press inTB 33
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11
ø x T -
ø x T ø 8 x 11 PU
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Expanding socketsø 5 x 11 drill hole with Base hinge 9 037 326 9 037 326 9 037 326 9 037 326 200 ea.
Cup 1 078 866 1 075 604 1 083 439 1 080 575 200 ea.
Screw on, ø 5 x 11 drill hole with Base hinge 9 037 321 9 037 321 9 037 321 9 037 321 200 ea.
Hinge = cup + base hinge
9,5
45
12,5
ø 35ø x T
9
52
12,5
ø 35ø x T
19
19Overlay 15 mm
Clip on single pivot hinge with concealed knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Fast clip on assembly Cup diameter 35 mm Cup depth 13 mm Base hinge with premounted expanding sockets and
fixing screws or for screw mounting with Euro screws Base hinge including 3rd fixing screw Integrated overlay adjustment – 2 mm Integrated eccentric height adjustment + 2 mm / – 2 mm Zinc die cast, nickel plated
39Technik für Möbel
Single pivot fast assembly hinge with concealed knuckle Selekta Pro 2035 For System 25
Opening angle and minimum reveal (depending on thickness of door and side panels)
15
15 115° 115° 115° 115° 0.916 115° 115° 115° 115° 1.118 115° 115° 115° 115° 5.019 115° 115° 115° 115° 6.42225
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 15 mmMin. overlay: 13 mm (adjustment)Hinge base: 14 mm Overall height: 10 mmDoor protrusion: 0.7 mm
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
90°
Overall height
Door protrusion
Minimum reveal
1,2
13
12
Side panel
Overlay max.
Hole line distance 37
Hinge basemin. R 2
Doorthickness
40 www.hettich.com
Single pivot slide on hinge with visible knuckle Selekta 4 For System 32
52 x 5.5 mm drilling pattern
Screw onTH 22
Press inTH 23
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11 PU
7
19
19Cup 5 570 142 5 570 143 200 ea.
Screw onø 5 x 11 drill hole with Base hinge 5 570 155 5 570 155 200 ea.
7
19
19Cup 5 570 142 5 570 143 200 ea.
Screw onø 5 x 11 drill hole with Base hinge 5 570 050 5 570 050 200 ea.
Selekta 4
Overlay 5.5 mm
Overlay 11 mm
5,5
52
14
ø 35ø x T
Hinge = cup + base hinge
Slide on single pivot hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Knuckle length 24 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 12.5 mm Base hinge for screw mounting with Euro screws Overlay adjustment – 4 mm Height adjustment + 2 mm / – 2 mm, with fixed centre setting The knuckle in corner hinges can be recessed into the door side Zinc die cast, nickel plated
41Technik für Möbel
Single pivot slide on hinge with visible knuckle Selekta 4 For System 32
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
5.5
15 270° 268° 263° 260° 253° 247° 7.516 268° 265° 260° 258° 251° 244° 7.518 262° 260° 255° 253° 246° 240° 7.519 245° 245° 245° 245° 245° 245° 7.522 197° 197° 197° 197° 197° 197° 7.525 186° 186° 186° 186° 186° 186° 8.0
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
Max. overlay: 5.5 mmMin. overlay: 1.5 mm (adjustment)Hinge base: 13 mmOverall height: 7 mmDoor protrusion: 11.5 mmOpening angle for 0 mm door protrusion: 142°
11
15 271° 267° 259° 7.516 270° 264° 257° 7.518 267° 259° 252° 7.519 245° 245° 245° 7.522 197° 197° 197° 7.525 186° 186° 186° 8.0
Max. overlay: 11 mmMin. overlay: 7 mm (adjustment)Hinge base: 18.5 mmOverall height: 7 mmDoor protrusion: 6 mmOpening angle for 0 mm door protrusion: 124°
90°
Overall height
Door protrusion
Minimum reveal
0,2
12,5
4
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
42 www.hettich.com
Single pivot slide on hinge with visible knuckle Selekta 4 twin hinge For System 32
Selekta 4 twin hinge
52 x 5.5 mm drilling pattern
Screw onTH 22
Press inTH 23
Overlay mm
Mounting Drill hole
Self closing feature Article ø x T -
ø x T ø 10 x 11 PU
Cup 5 570 142 5 570 143 200 ea.
Screw onø 5 x 11 drill hole with Base hinge 5 570 069 5 570 069 100 ea.
7
19
19 Overlay 5.5 mm
5,5
52
14
ø 35ø x T
Slide on single pivot twin hinge with visible knuckleQuality grades to EN 15570, Level 2 For office, organisational and contract furniture Cup and base hinge installed separately Knuckle length 24 mm, see drawings below for knuckle diameter Cup diameter 35 mm Cup depth 12.5 mm Base hinge for screw mounting with Euro screws Overlay adjustment – 4 mm Height adjustment + 2 mm / – 2 mm, with fixed centre setting Zinc die cast, nickel plated
Hinge = 2 cups + base hinge
43Technik für Möbel
Single pivot slide on hinge with visible knuckle Selekta 4 twin hinge For System 32
AdviceFor accessories, see pages 44 - 47For quality criteria, fitting information and mounting advice, see pages 48 - 52
Door protrusion and minimum reveal when opened to 90° Mounting example, closed door
Opening angle and minimum reveal (depending on thickness of door and side panels)
Overlay mm
Door thickness mm
Side panel mm Minimum reveal per door mm (for 90°)15 16 18 19 22 25
5.5
15 180° 180° 180° 180° 180° 180° 7.516 180° 180° 180° 180° 180° 180° 7.518 180° 180° 180° 180° 180° 180° 7.519 180° 180° 180° 180° 180° 180° 7.522 151° 151° 151° 151° 151° 151° 7.525 90° 90° 90° 90° 90° 90° 8.0
Max. overlay: 5.5 mmMin. overlay: 1.5 mm (adjustment)Hinge base: 23.5 mmOverall height: 7 mmDoor protrusion: 11.5 mmOpening angle for 0 mm door protrusion: 142°
90°
Overall height
Door protrusion
Minimum reveal
0,2
12,5
4
Side panel
Overlay max.
Hole line distance 37
Hinge base
Doorthickness
Doorthickness
44 www.hettich.com
Glass door decorative capType Order no. PUFor TH 32 cup (Selekta Pro 2000) 0 077 943 50 ea.For TX 32 / 52x9 cup (Selekta Pro 2000 / Selekta Pro 2035) 1 081 304 50 ea.For TB 32 cup (Selekta Pro 2000 / Selekta Pro 2035) 0 010 075 50 ea.For TH 22 cup (Selekta 4) 1 001 881 50 ea.
Selekta Pro 2000 mounting examples
5 - 6
5,4
Side
Drilling pattern
ø 8 - 0,5
C
B
A
ø 36 - 0,5
Selekta 4 mounting examples
7
5 - 6
5
Side
5 - 6
5,4
5 - 6
Side
5
5 - 6
7
Side
Minimum reveal 7.5 mm
Use Dimension A mm Dimension B mm Dimension C mm
For TH 32 cup 12.5 52 5.5
For TX 32 / 52x9 cup 12.5 52 9
For TB 32 cup 12.5 45 9.5
For TH 22 cup (Selekta 4) 13.4 52 6
Single pivot hinge with knuckleSelekta Pro 2000 / Selekta Pro 2035 / Selekta 4Accessories
HettCAD
The Selekta Pro 2000, Selekta Pro 2035 and Selekta 4 hinges can be used with decorative caps for glass doors
For each hinge a cutaway hole is required for the hinge cup and two holes for the fixing screws
The glass door is protected by intermediate shims and bushes of transparent plastic ensuring that the hinge is securely mounted on the glass door.
Glass thickness 5 - 6 mm Including 2 fixing screws Zinc die cast, nickel plated
HettCAD
45Technik für Möbel
Screw on Silent SystemOrder no. PU9 055 416 200 ea.
Fitting information
55
32 A
ø 35
Installation
2.
1.>
1000
mm
≤ 10
00 m
m
2
1
Number of Silent System elementsOverlay mm Dimension A mm14 / 15 / 16 37.511 / 12 33.85.5 / 6.5 28.3Inset 21.8
Single pivot hinge with knuckleSelekta Pro 2000 / Selekta Pro 2035Accessories
Suitable for use with - Selekta Pro 2000 - Selekta Pro 2000 twin hinge - Selekta Pro 2000 E - Selekta Pro 2035 Suitable for overlay, half overlay and inset doors Screw on installation on the door Silent System infinitely adjustable at setting wheel Can be added at a later stage Zinc die cast, nickel plated
46 www.hettich.com
Cover cap
Suitable for use with Selekta Pro 2000 and Selekta Pro 2035 Cover caps with customised imprint available on request Plastic
90° / 115° opening angle limiter
Opening angle ° Order no. PU
90 9 020 624 200 set
115 9 020 627 200 set
Type Order no. PU
grey 1 082 925 2000 ea.
black 1 076 200 2000 ea.
Type Order no. PU
For TX 32 / 52x9 1 080 589 500 ea.
For TX 33 / 52x9, including screws 9 072 979 500 set
90° / 135° opening angle limiter
Version Order no. PU
Bracket 1 003 838 1000 ea.
Wire clip, limitation 90° 1 003 835 1000 ea.
Wire clip, limitation 135° 1 003 836 1000 ea.
Garment guard Suitable for use with Selekta Pro 2000 Prevent garments inside the wardrobe from getting trapped
in the hinge Plastic, white
Single pivot hinge with knuckleSelekta Pro 2000 / Selekta Pro 2035 / Selekta 4Accessories
Finger guard
Suitable for use with Selekta Pro 2000 For sticking to side section of the base hinge Plastic, grey
Type Order no. PUFor A12 overlay(door / side = 16 / 16 mm) / A14 / A15 / A16
9 091 015 50 ea.
For A5.5 / A6.5 / A11 / A12 overlay (door / side = 19 / 16 mm)
9 091 016 50 ea.
Suitable for use with Selekta Pro 2000 Including fixing screws Zinc die cast / nickel plated steel
Suitable for use with Selekta 4 / 5.5 mm overlay Suitable for use with TH 22 cup Zinc die cast / nickel plated steel
47Technik für Möbel
Fixing screws
Pozidrive cross head Steel, nickel plated
Type Dimensions mm Order no. PU
For Selekta Pro 2000 / 2035 base hinge ø 6.3 x 14.5 (round head) 9 021 314 500 ea.
For Selekta Pro 4 base hinge ø 6 x 14 (countersunk head) 1 028 128 1000 ea.
Single pivot hinge with knuckleSelekta Pro 2000 / Selekta Pro 2035 / Selekta 4Accessories
48 www.hettich.com
Quality that meets all the demands
The quality of hinges is subject to a process of continuous monitoring. Hettich fittings comply with the national and international quality standards of the markets our customers operate in. The diagrams below show examples of the principles behind some of the testing processes. Application area Hettich hinges can be used in living room, kitchen, bathroom and office furniture both in the home and business environment.
Loading capacity The quality levels indicated on products comply with the requirements of EN 15570 and satisfy the overload tests at the specified level. We will be pleased to provide any further information you may require. Corrosion test Hettich hinges meet the requirements on corrosion defined in EN 15570 for the 72-hour condensation water test to EN 6270. Quality assurance The processes for assuring the quality of Hettich hinges are certified under EN ISO 9001, Cert. No. DE8000209.
Endurance test
The door is subjected to a specific number of opening and closing cycles.
Closing test
The door is opened by 30° and pushed closed from this position by means of a pulley and falling weight.
Horizontal test
The door is over opened with a defined test force F. (This test only applies to hinges with an opening angle < 135°.)
Vertical test
The door is subjected to a specific number of opening and closing cycles under a defined additional load G.
Single pivot hinge with knuckleSelektaQuality criteria
G
FG
FS
30°
F
G
FG
F
45°
49Technik für Möbel
Single pivot hinge with knuckleSelektaTechnical and fitting information
Number of hinges per door
X2
34
5
≥ 90
≤ 24
00≤
2000
≤ 16
00≤
900
~ 10
0
≤ 13,7
≤ 17,1
≤ 7,7
≤ 22
Door
hei
ghts
Door width ≤ 600
Door width, height and weight as well as the material quality of the door are decisive factors determining the number of hinges required. The factors encountered in practice differ widely from case to case. For this reason, the number of hinges specified in the diagram must be understood as a guide only. If in doubt, it is recommended to carry out a trial door mounting and adjust the number of hinges as necessary.
Drilling pattern for base hinge Cup tolerances
For reasons of stability, distance X between the hinges must always be made as large as possible. On doors with two hinges, the distance between hinges must be at least equal to the width of the door. An additional hinge approx. 100 mm below the upper hinge is recommended for particularly heavy doors.
For overlay doors, for hinges using System 32
For overlay doors, for hinges using System 25
The drill hole positions must be set back by 20 mm for inset doors.
Production tolerances shown in the drawing must be kept.
Production tolerances shown in the drawing must be kept.
32
37
ø 5 ± 0,1 x 11 12
16
25
37
12
12,5
ø 5 ± 0,1 x 11
ø 10 ± 0,1
ø 8 ± 0,1
ø 35 + 0,2
50 www.hettich.com
Cup installation / Base hinge installation
Clip on installation
Overlay adjustment / Height adjustment
Removal
ø 3,5 x 16 ø 4 x 16 ø 6,3 x 14,5 ø 4 x 16
✔
✘
1.
2.
3.
Single pivot hinge with knuckleSelektaAdvice on installing Selekta Pro 2000
Screw on Press in Screw on With premounted expanding sockets
51Technik für Möbel
Cup installation / Base hinge installation
Clip on installation
Overlay adjustment / Height adjustment
Removal
ø 3,5 x 16 ø 6,3 x 14,5
2.
1.
ø 3,5 x 20
1a
1b
Single pivot hinge with knuckleSelektaAdvice on installing Selekta Pro 2035
Screw on Press in Screw on With premounted expanding sockets
52 www.hettich.com
Cup installation / Base hinge installation
Slide on installation
Overlay adjustment
Height adjustment
Single pivot hinge with knuckleSelektaAdvice on installing Selekta 4
Screw in Press in Screw on
ø 3,5 x 16 ø 6,0 x 14
3.
1.
2.
2.
2.
1.
4.
4.
3.
5.
ø 3,5 x 16
53Technik für Möbel
Selekta Pro 2000 base hinges
Single pivot hinge with knuckleSelektaSummary
Overlay Hole spacing Mounting Self closing feature Colour Order no. PU PageA5.5 32 Screw on with nickel plated 9 037 895 200 ea. 16A5.5 32 Exp. sockets with nickel plated 9 037 900 200 ea. 16A5.5 25 Screw on with nickel plated 9 037 885 200 ea. 18A5.5 25 Exp. sockets with nickel plated 9 037 898 200 ea. 18A5.5 twin hinge 32 Screw on with nickel plated 9 037 912 100 ea. 28A5.5 twin hinge 32 Exp. sockets with nickel plated 9 037 915 100 ea. 28A5.5 twin hinge 25 Screw on with nickel plated 9 037 910 100 ea. 30A5.5 twin hinge 25 Exp. sockets with nickel plated 9 037 914 100 ea. 30A6.5 32 Screw on with nickel plated 9 037 246 200 ea. 16A6.5 32 Exp. sockets with nickel plated 9 037 248 200 ea. 16A6.5 25 Screw on with nickel plated 9 037 245 200 ea. 18A6.5 25 Exp. sockets with nickel plated 9 037 247 200 ea. 18A6.5 twin hinge 32 Screw on with nickel plated 9 037 263 100 ea. 28A6.5 twin hinge 32 Exp. sockets with nickel plated 9 037 265 100 ea. 28A6.5 twin hinge 25 Screw on with nickel plated 9 037 261 100 ea. 30A6.5 twin hinge 25 Exp. sockets with nickel plated 9 037 264 100 ea. 30A11 32 Screw on with nickel plated 9 037 906 200 ea. 16A11 32 Exp. sockets with nickel plated 9 037 909 200 ea. 16A11 25 Screw on with nickel plated 9 037 903 200 ea. 18A11 25 Exp. sockets with nickel plated 9 037 907 200 ea. 18A12 (for 16 mm door) 32 Screw on with nickel plated 9 022 298 200 ea. 16A12 (for 16 mm door) 32 Exp. sockets with nickel plated 9 022 302 200 ea. 16A12 (for 16 mm door) 25 Screw on with nickel plated 9 022 296 200 ea. 18A12 (for 16 mm door) 25 Exp. sockets with nickel plated 9 022 300 200 ea. 18A12 (for 19 mm door) 32 Screw on with nickel plated 9 022 307 200 ea. 20A12 (for 19 mm door) 32 Exp. sockets with nickel plated 9 022 311 200 ea. 20A12 (for 19 mm door) 25 Screw on with nickel plated 9 022 305 200 ea. 22A12 (for 19 mm door) 25 Exp. sockets with nickel plated 9 022 309 200 ea. 22A14 32 Screw on with nickel plated 9 040 651 200 ea. 20A14 32 Exp. sockets with nickel plated 9 040 636 200 ea. 20A14 25 Screw on with nickel plated 9 040 755 200 ea. 22A14 25 Exp. sockets with nickel plated 9 040 756 200 ea. 22A15 32 Screw on with nickel plated 9 022 299 200 ea. 20A15 32 Exp. sockets with nickel plated 9 022 308 200 ea. 20A15 25 Screw on with nickel plated 9 022 297 200 ea. 22A15 25 Exp. sockets with nickel plated 9 022 306 200 ea. 22A15 32 Screw on with black coated 9 039 309 200 ea. 24A15 32 Exp. sockets with black coated 9 047 042 200 ea. 24A15 25 Screw on with black coated 9 039 308 200 ea. 26A15 25 Exp. sockets with black coated 9 039 512 200 ea. 26
Attachment with expanding sockets and premounted screwsScrew on attachment with Euro screws
54 www.hettich.com
Single pivot hinge with knuckleSelektaSummary
Selekta Pro 2000 base hinges
Cups for Selekta Pro 2000 and Selekta Pro 2035
Selekta Pro 2035 base hinges
Attachment with expanding sockets and premounted screwsScrew on attachment with Euro screws
Attachment with expanding sockets and premounted screwsScrew on attachment with Euro screws
Overlay Hole spacing Mounting Self closing feature Colour Order no. PU PageA16 32 Screw on with nickel plated 9 022 303 200 ea. 20A16 32 Exp. sockets with nickel plated 9 022 312 200 ea. 20A16 25 Screw on with nickel plated 9 022 301 200 ea. 22A16 25 Exp. sockets with nickel plated 9 022 310 200 ea. 22inset 32 Screw on with nickel plated 9 037 251 200 ea. 32inset 32 Exp. sockets with nickel plated 9 037 256 200 ea. 32inset 25 Screw on with nickel plated 9 037 250 200 ea. 34inset 25 Exp. sockets with nickel plated 9 037 254 200 ea. 34
Drilling pattern Hole spacing Mounting Colour Order no. PU PageTH 32 52x5.5 Screw on nickel plated 1 083 438 200 ea. -*TH 33 52x5.5 Press in nickel plated 1 080 574 200 ea. -*TX 32/52x9 52x9 Screw on nickel plated 1 078 866 200 ea. -*TX 33/52x9 52x9 Press in nickel plated 1 075 604 200 ea. -*TX 32/52x9 52x9 Screw on black coated 9 039 609 200 ea. 24, 26TX 33/52x9 52x9 Press in black coated 9 039 618 200 ea. 24, 26TB 32 45x9.5 Screw on nickel plated 1 083 439 200 ea. -*TB 33 45x9.5 Press in nickel plated 1 080 575 200 ea. -*TB 32 45x9.5 Screw on black coated 9 020 471 200 ea. 24, 26TB 33 45x9.5 Press in black coated 9 040 012 200 ea. 24, 26
Overlay Hole spacing Mounting Self closing feature Colour Order no. PU PageA15 32 Screw on with nickel plated 9 037 323 200 ea. 36A15 32 Exp. sockets with nickel plated 9 037 328 200 ea. 36A15 25 Screw on with nickel plated 9 037 321 200 ea. 38A15 25 Exp. sockets with nickel plated 9 037 326 200 ea. 38
Selekta 4 base hinges
Cups for Selekta 4
Overlay Hole spacing Mounting Self closing feature Colour Order no. PU PageA5.5 32 Screw on with nickel plated 5 570 155 200 ea. 40A5.5 twin hinge 32 Screw on with nickel plated 5 570 069 100 ea. 42A11 32 Screw on with nickel plated 5 570 050 200 ea. 40
Overlay Hole spacing Mounting Colour Order no. PU PageTH 22 52x5.5 Screw on nickel plated 5 570 142 200 ea. 40, 42TH 23 52x5.5 Press in nickel plated 5 570 143 200 ea. 40, 42
* The cups that can be combined with the chosen hinge are shown on the hinge product pages.
Hettich accepts responsibility for the world we live in. This awareness defines the strict policy of environmental management we practise. Our environmental officer has taken personal responsibility for these aspects throughout the group of companies over a period of many years. In addition, a separate environment committee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Regulation. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sustainability.
Hettich standard for product materials
Hettich underpins its commitment by applying an internal standard for product materials. This ensures that every product – from production to disposal – satisfies all environmental requirements. Hettich products are durable. Appropriately foresighted, our rigorous standards are formulated to ensure that international legislation is met as well. This provides a reliable basis for marketing furniture worldwide.
Hettich environmental management
In 1996 Hettich started introducing effective environmental management systems under the stringent EMAS Regulation (currently: EC Regulation No. 761/2001, including EN ISO 14.001/2004). This not only enables us to improve our environmental performance on a broad front but also achieve a high level of safety which, not least, also benefits our customers. This is why we also require our suppliers to meet the necessary minimum standards of environmental protection, industrial safety, health care and social welfare.The results achieved in the drawer runner and drawer system product segment at the Kirchlengern operation illustrate the impressive effects these measures have and verifiably demonstrate our tireless endeavours to translate words into action:
Relief to the environment between 1997 and 2008:
Specific water consumption: 56 per cent Specific power consumption: 21 per cent Specific heat consumption: 84 per cent Specific CO2 emissions: 29 per cent
Hettich and the environment: committed to responsible practice, active protection, innovative thinking.
Ord
er n
o.: 9
182
768
1402
-043
-Sel
ekta
-121
4-H
ET/e
n
www.hettich.com