The HAARP Facility

Post on 18-Jan-2016

75 views 7 download

Tags:

description

The HAARP Facility. Briefing to HAARP/Resonance Meeting University of Maryland, College Park November 8, 2011 Rob Jacobsen Mike McCarrick Helio Zwi Marsh Creek LLC, Washington DC. The HAARP Array Specification. 180 Element (12x15) Phased Array 360 Nested Crossed Dipoles - PowerPoint PPT Presentation

Transcript of The HAARP Facility

Briefing to

HAARP/Resonance Meeting

University of Maryland, College Park

November 8, 2011

Rob Jacobsen

Mike McCarrick

Helio Zwi

Marsh Creek LLC, Washington DC

The HAARP Facility

The HAARP Array Specification

• Beam can be Slued 30º off Zenith in any Azimuth 2.8 to 8 MHz (decreasing to 15º at 10 MHz)

• Rapid Scanning of +/- 15º Around Pointing Direction

• FM, AM and Pulse Modulation from DC to 30 kHz

• Dual Frequency Operation (Split Array)

• Linear, Left or Right Circular Polarization

• Transmitter Power Generated on Site 16.25 MVA at 12.5 kV

• System Operation from -40º F to + 90º F

•180 Element (12x15) Phased Array

•360 Nested Crossed Dipoles Low Band Dipole - 2.8 to 8.4 MHz High Band Dipole - 7 MHz to 10 MHz

•3.6 MW Radiated from 360 10kW Transmitters

•Instantaneous Bandwidth 200 kHz (2.8 MHz) 500 kHz (10 MHz)

•ERP of 84 to 95 dBW

•Beam width 20ºx16º (2.8 MHz) 5.7ºx4.5º (10 MHz)

Antenna Element Components

15 feet

43 feet

53 feet

Low-Band Dipole

High-Band Dipole

Ground Screen

Ground (Marginal permafrost)

Thermosyphon

AMU

AMU

30 feet

69 feet

Low Band Balanced AMU & Hybrid

Radiation EfficiencydB

Frequency

High Band Balanced AMU & Hybrid

The HAARP Transmitters

• 2.8 MHz to 10 MHz - Continuous Tuning

• Dual Independent Outputs - 10 kW Each Side

• Automatic Antenna Tuning to VSWR < 6:1

• Graceful Degradation for VSWR > 6:1

• Linear Amplifier 200 kHz Bandwidth (2.8 MHz), 500 kHz (10 MHz)

• Harmonic and Spurious Output < -80 dBc (in band)< -120 dBc (out of band)< -150 dBc (from 88 to 200 MHz)

• Modes of Operation - CW, AM, FM, Pulse

• 6 Dual Units Mounted in each Shelter

The HAARP Transmitters and Shelters

0.0

2.0

4.0

6.0

8.0

10.0

12.0

1:1 2:1 3:1 4:1 5:1 6:1 7:1 8:1 9:1 10:1

VSWR

PO

WE

R (kW

) FORWARD POWER

DELIVERED POWER

1 dB/ Div

5.5 6.0 6.5 Frequency MHz

0 5 10 15 20 25 Microseconds

1.0 kV--

0 V--

-1.0 kV-

Typical Data Rates

Operations Center

Real-time control system(Power, phase, key, signal source)

Transmitter Array

Basic Transmitter Control(Standby, HV, RF, etc.)

Environmental Control

Shelter RF Modules(Dipole I&Q)

Individual Transmitters(Transmitter status)

Shelter ECS

360 MB/s(sustained)

~200 MB/s(burst)

< 1kB/s

~50kB/s

< 1kB/s

~240kB/sec

Facility Power Plant

• The Power Plant uses 5 EMD diesel engines, each of which is rated at 3,600 HP.

• The total power capability is 16.25 MVA (13MW, Pf 0.8)

• To operate the Array at full power requires 4 generators (9.6 MW).

• Fuel consumption at full array power will be approximately 565 gal per hour

1.2 MVA of commercial power available for housekeeping function

Dipole Impedance(as seen by TX)

Forward/ReflectedPower

4.50 MHz

10 dB

The Eye of HAARP

2.7 MHz Magnetic Zenith

5.95 MHz Magnetic Zenith

9.2 MHz Magnetic Zenith

0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0° 0°

Impedance vs. Scan Angle

4.5 MHzzenith=0°, azimuth=0°

Impedance vs. Scan Angle

4.5 MHzzenith=30°, azimuth=0°

725° 659° 593° 527° 461° 395° 329° 264° 198° 132° 66° 0°

Impedance vs. Scan Angle

4.5 MHzzenith=60°, azimuth=0°

1255° 1141° 1027° 913° 799° 685° 571° 456° 342° 228° 114° 0°