Post on 30-Apr-2020
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Welcome to Temperature, Process & PressureInstruments Product Line Overview Catalog
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
About Temperature & Process Instruments
We strive to bring you the latest innovative technologies from leading manufacturers of temperature and
process instrumentation. Our product lines include:
Accurate Thermal Systems LLC - ThermCal 130 and ThermCal 400 Portable Dri Block Calibrators
Athena Controls - 1/16 and 1/4 Autotune Temperature and Process Controllers and SSR
E Instruments International - Bench Top Dry Block Calibrators, Indoor Air Quality Meters, Flue Gas
Combustion Analyzers Instrumentation
Elan Technical Corporation - Wall or Duct Mounted Temperature and Relative Humidity Transmitters
Martel Electronics - Martel Electronics Single Function and Multifunction Handheld Temperature and
Process Calibrators. BetaGauge Pressure Calibrators, BetaProbe TI Thermometer.
Novus Automation - Head Mnounted Programmable Transmitters, Relative Humidity and Temperature
Transmitters, Portable Thermocouple, RTD and Process Meters
Process Sensors Corporation - Portable and Fixed Mounted Industrial Infrared Thermometers
S-Products - Head Mounted "hockey-puck" or DIN Rail Mounted Microprocessor based 2-wire
transmitters and Temperature & Process Panel Meters/Indicators
Test Products International (TPI) - Industrial Refrigerant, Combustible Gas Leak Detectors, Combustion
Analyzers and Digital Multimeter, Portable Humidity and Air Flow Meters
Ordering is easy fast and secure just go to our web site at:
http://www.tnp-instruments.comand Click on the Online Store Link, for your convenience we accept the following credit cards
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Welcome to Temperature, Process & PressureInstruments Product Line Overview Catalog
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Multifunction Temperature & Process Calibration Instrumentation
} DMC-1410 High Accuracy Multifunction Documenting Temperature and Process Calibrator
} MC-1210 High Accuracy Multifunction Temperature and Process Calibrator with HART® Compatibility
} MC-1010 High Accuracy Multifunction Process Calibrator
} 3001 Precision Two Channel, High Accuracy Bench Top Laboratory Temperature and Process Calibrator
Temperature & Process Calibration Instrumentation
} MC-8010 Precision Universal Thermocouple and RTD Temperature Calibrator
} TC-100 Thermocouple/mV Calibrator Precision Thermocouple Calibrator
} PSC-4010 High Accuracy Process Signal Calibrator
} LC-110H Precision Current Loop Calibrator with HART Communications and Diagnostic
} LC-110 Precision Current Loop Calibrator
} Low Cost MS-420 Mini Source 4 to 20 mA Process Loop Calibrator
} DC80T Read and Source Thermocouple and mV
} DC80R Read and Source RTD Temperature and Ohm Calibrator
Portable Dry Block Thermocouple and RTD Sensor Calibrators and Black Body Infrared Thermometer
Calibrators
} ThermCal 130 Low Temperature Portable Dry Block Calibrator
} ThermCal 400 Portable Dry Block Medium Temperature Calibrator
} UCAL 400+ Portable Dry Block Temperature Calibrator
} TECAL 700X High Temperature Dry Block Calibrator
} TECAL F Series Temperature Dry Block Calibrator
} TCS-Series Temperature Dry Calibrator
Pressure Calibration Instrumentation
} BetaGauge 330 Hand Held High Performance Pressure Calibrator with Integrated Electric Pump
} BetaGauge 311A/311A-EX Single Sensor Pressure Calibrators
} BetaGauge 321A/321A-EX Dual Sensor Pressure Calibrators
} BetaGauge PI PRO Digital Pressure Calibration Test Gauges
} BetaGauge PIR PRO Digital Reference Class Digital Test Gauge
} BetaGauge High Accuracy Pressure Modules for DMC-1410, MC-1010, MC-1210 Multifunction Calibrator
} MECP Series Hand Operated Pneumatic and Hydraulic Pressure Calibration Pump
} TPI 621 Dual Input Differential Manometer
} TPI 623 Dual Input High Resolution Digital Manometer
} TPI 665 Differential Pressure Manometer
} TPI 665L Differential Pressure Manometer Can Be Used In Non-Corrosive Liquid Applications
Combustion Gas Analyzer for Residential & Commercial HVAC Boilers
} BTU 700 Economical Residential Combustion Analyzer
} BTU 900 Series Professional Portable Multifunctional Combustion Flue Gas Analyzers
} TPI 712 Combustion Flue Gas Analyzer
} E1500 Series Residential Portable Multifunctional Combustion Flue Gas Analyzers
} TPI 714 Combustion Flue Gas Analyzer With Nitric Oxide and Datalogging
} TPI 716 Combustion Analyzer for Flue Gas Boiler Maintenance and Efficiency Analyzer with Datalogging
} TPI 716N Combustion Flue Gas Analyzer With Nitric Oxide
} E4500 Series Professional Portable Multifunctional Combustion Flue Gas Analyzers with Up to Four Gas
Sensors
Table of Contents
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Welcome to Temperature, Process & PressureInstruments Product Line Overview Catalog
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Hand Held and Portable Indoor Air Quality (IAQ) and Test Instruments
} AQ-Expert Portable Indoor Air Quality Monitor
} AQ Pro Series Indoor Air Quality Monitor Instrument for Environmental Test and Measurement
} AQ Comfort Series Indoor Air Quality Monitor Instrument for Environmental Test and Measurement
} TPI 1010A Multifunction Indoor Air Quality Measure CO2, CO, RH and % Outside Air
} TPI 1008A Indoor Air Quality (IAQ) Meter Measure Carbon Dioxide and Ambient Temperature
Thermo-Anemometers Hot-Wire or Vane Style Air Flow Instruments
} TPI 556C1 Digital Air Velocity / Air Flow Meter
} TPI 575C1 Combination Vane and Hot Wire Anemometer
Humidity, Dew Point, Temperature Instruments
} TPI 597C1 Digital Hygrometer/Psychrometer
} RHT-WM Wall Mounted Temperature and Humidity Transmitter
} RHT-DM Duct Mounted Humidity and Temperature Transmitter
} HT500 Series Economical Wall-Mount Relative Humidity and Temperature Transmitters
} HP140/HP150-IS Intrinsically Safe Wall or Duct Mounted Relative Humidity Transmitters
Temperature and Process Controllers
} Legecy Series 16 1/16 DIN PID Autotune Controller
} 16C 1/16 DIN Autotune PID Controller with 8 Segment Ramp and Soak
} Legacy Series 25 1/4 DIN Universal Autotune Temperature/Process Controller
} OTC 25 1/4 DIN Single Loop Temperature Controller
} ZC and PC Series Solid State SSRContactors Power Controller
MP82000 Series Head Mounted 2-wire 4 to 20mA Programmable Temperature Transmitters
} Mp82710H HART® Protocol Head Mounted Programmable 2-Wire 4 to 20mA Temperature Transmitter
} Mp82710 Head Mounted Programmable 2-Wire 4 to 20mA Temperature Transmitter
} Mp82800 Series Programmable Head Mounted Thermocouple and RTD Linearized Temperature
Transmitter 2-Wire 4 to 20mA Output
} Mp82830-R Programmable Head Mounted 2-Wire 4 to 20mA Temperature Transmitter Pt100 RTD Input
} MP82830-T Programmable Thermocouple Input 2-Wire 4 to 20mA Temperature Transmitter
} TxIsoPack-USB Head Mounted Programmable Temperature Transmitter
} TxBlock-USB Head Mounted Programmable Temperature Transmitter
MP88000 Series DIN Rail Mounted 2-wire 4 to 20mA Programmable Temperature Transmitters
} Mp88710H HART® Protocol Din Rail Mounted Programmable 2-Wire 4 to 20mA Temperature Transmitter
} Mp88710 Series Din Rail Mounted Programmable 2-Wire 4 to 20mA Temperature Transmitter
} Mp88810 Series Programmable Din Rail Mounted Thermocouple and RTD Linearized Temperature
Transmitter 2-Wire 4 to 20mA Output
} Mp88800R Programmable Din Rail Mounted 2-Wire 4 to 20mA Temperature Transmitter Pt100 RTD Input
Industrial Portable Refrigerant and Combustible Gas Leak Detectors
} Industrial TPI 750A Portable Refrigerant Leak Detector With 0.02 Oz/yr. Sensitivity
} Industrial TPI 753A Portable Refrigerant Leak Detector with 0.1 Oz/yr. Sensitivity
} Industrial 7899 Hand Held Combustible Gas Leak Detector with Easy To Read Large LCD Display
} Industrial TPI 720B Economical Portable Combustible Gas Leak Detector
} Industrial TPI 721 Portable Combustible Gas Leak Detector with Bargraph LCD Display
} Industrial TPI 775 Multifunction Hand Held Combustible Gas Detector and Ambient Carbon Monoxide
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Welcome to Temperature, Process & PressureInstruments Product Line Overview Catalog
Hand Held Digital RTD and Thermocouple Thermometers
} BetaProbe TI Precision Thermometers with Adjustable Angle RTD Probe, Integral 12" or 18" Long Probe
} DC80T Read and Source Thermocouple and mV
} DC80R Read and Source RTD Temperature and Ohm Calibrator
Handheld and Portable Non-Contact Infrared Thermometers
} PTLST-20-1M/2M Portable Documenting Infrared Thermometer
} PSC-90 Series High Performance Portable Documenting Infrared Thermometer
} PLST Handheld Portable Non-Contact Infrared Thermometer with LC Flip Display, Crosshair Laser Sighting
} PLMS-PRO Handheld Portable Non-Contact Infrared Thermometer with Laser Sighting
} PLMS-PLUS Handheld Portable Non-Contact Infrared Thermometer with Laser Sighting and Adjustable
Emissivity
} PLMS Handheld Portable Infrared Thermometer with Laser Sighting and Fixed Emissivity
Temperature and Process Panel Meters and Indicators
} N1540 1/8 DIN Programmable Temperature Process Panel Meter with USB Communication Port
} N1500 1/8 DIN Programmable Temperature and Process Panel Meter
} Mp95800 Programmable Microprocessor Based 1/8 DIN Digital Panel Meter
} PM 5600 Loop Powered 1/8 DIN Panel Mount Process
} PM 5625 Loop Powered Weatherproof Loop Process Indicator
SL Series Solarimeter Solar Radiation Meters
} TPI 510 Solar Irradiance Meter Handheld
Industrial Test Tools Tachometers, Moisture Meters, Clamp-On and DMM
} TPI 505 Combination Contact/Non-Contact Tachometer
} TPI 505L Combination Contact/Non-Contact Tachometer
} TPI 183A True RMS Digital Multimeter Industrial 4000 Count True RMS Multimeter
} TPI 296 AC/DC True RMS Digital Clamp Meter Industrial True RMS 700 Amp Clamp-On Meter and DMM
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Portable Multifunction Temperature & Process Calibrators
DMC1410 High Accuracy Multifunction Documenting Temperature and
Process Calibrator
MC1210 High Accuracy Multifunction Temperature and Process
Calibrator with HART® Compatibility
Features
} Measure and source 13 Thermocouple and RTD Types, Ohm, Current,Voltage, Frequency; source pulse trains
} Isolated mA/V read-back circuit for complete transmitter calibration
} Communication port compatible with both Fluke 700 Series and BetaCalibrator pressure modules
} Built-in 24V supply can drive 4 to 20mA loops up to 1000 Ohm
} Direct entry of custom RTD coefficients (Ro, A, B, C)
} Highest accuracy in class to 0.015% of reading
} Meets CE requirements and is designed to IEC 1010 safety standards
} RS-232 interfaceFor more information visit our web site at: www.tnp-instruments.com/mc1210_multifunction_calibrator.html
MC1010 High Accuracy Multifunction Process Calibrator with Common
Digital Multi-Meter (DMM) Functions
Features
} Measure and source 10 Thermocouple Types, 8 RTD Types, Ohm, Current,Voltage, Frequency
} Isolated mA/V read-back circuit for complete transmitter calibration
} Communication port compatible with both Fluke 700 Series and BetaCalibrator pressure modules
} Built-in 24V supply can drive 4 to 20mA loops up to 1000 Ohm
} Source or read 0 to 20 Volts (±0.015% of reading accuracy)
} ±0.4°C thermocouple/ ±0.3°C RTD accuracy
} Meets CE requirements and is designed to IEC 1010 safety standards
} RS-232 interfaceFor more information visit our web site at: www.tnp-instruments.com/mc1010_multifunction_calibrator.html
Features
} Measure and source 13 Thermocouple and RTD Types, Ohm, Current,Voltage, Frequency; source pulse trains
} Test for pass/fail criteria
} Capture both AS FOUND and AS LEFT data
} Review data and print calibration certificates in the field
} Upload data to PC for analysis with Microsoft® Excel® or full database
} Store up to 21 data points per instrument, and up to 50 instruments in non-volatile memory
} Highest accuracy in class to 0.015% of reading
} Built-in 250 Ohm resistor for HART compatibility with smart transmittersand PLCs
For more information visit our web site at: www.tnp-instruments.com/dmc1410_multifunction_documenting_calibrator.html
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Portable Multifunction Temperature & Process Calibrators
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
PTC 8010 Precision Universal Temperature Calibrator High Accuracy
Calibration Measure and Source Thermocouples, RTD's, Ohm and
Millivolts
Features
} Measure and source 10 Thermocouple Types, 8 RTD Types, Ohm,Millivolts and YSI 400 Thermistor
} Simple, straight forward, Intuitive user interface
} Works with Rosemount 3144 and all other smart transmitter
} High accuracy ±0.4°C J thermocouple and ±0.3°C PT 100-385 RTD's; allerrors included
} NEMA 4 rated case, rugged design
} RTD simulation works with all pulsed (smart) transmitters
} YSI 400 series thermistor range for medical applications
} Store set-points for each output functionFor more information visit our web site at: www.tnp-instruments.com/PTC8010_thermocouple_RTD_calibrator.html
PSC-4010 High Accuracy Process Signal Calibrator Reads and Simulates
Voltage, Current, and Frequency Signals
Features
} New ClearBrite Graphic Display
} Auto Stepping/Auto Ramping
} Easy to learn yet powerful 3 Key Martel Menu System
} Reads and simulates process control signals voltage, current, and Frequency
} New streamlined case design
} Built-in 24 VDC source for powering two wire transmittersFor more information visit our web site at: www.tnp-instruments.com/PSC4010_multifunction_process_calibrator.html
Features
} 0.0025% Calibration Accuracy
} Source/Read thermocouple, RTD, Voltage, Current and Pressure
} Custom RTD and SPRT profiles
} RS-232, USB and IEEE-488 remote control
} Compatible with Fluke Met/Cal® Software
} Isolated Measurement Channel
} Includes NIST Certificate with calibration data For more information visit our web site at: www.tnp-instruments.com/3001_precision_multifunction_calibrator.html
3001 Two Channel, Precision Laboratory Standard High Accuracy Bench
Top Laboratory Temperature and Process Multifunction Calibrator
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Precision Current Loop Calibrators
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
New LC-110H Precision Current Loop Calibrator with HART
Communications and Diagnostic
Features
} Best in Class Accuracy at 0.01% Reading
} Small Rugged design operates on (6) standard AAA batteries
} Intuitive interface that features a Quick-Set Knob
} 24VDC loop power with mA Measure Mode (-25% to 125%)
} Resolution of 1µA on mA ranges and 1mV on voltages ranges
} Built in selectable 250 Ohm Resistor for HART communications
} Simple two wire connection for all measurements
} Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
} Variable step & ramp time in seconds
} Adjustable span selection (0 to 20mA or 4 to 20mA)For more information visit our web site at: www.tnp-instruments.com/lc110_milliamp_loop_calibrators.html
New LC-110 Precision Current Loop Calibrator
Features
} Best in Class Accuracy at 0.01% Reading
} Small Rugged design operates on (6) standard AAA batteries
} Intuitive interface that features a Quick-Set Knob
} 24VDC loop power with mA Measure Mode (-25% to 125%)
} Resolution of 1µA on mA ranges and 1mV on voltages ranges
} Simple two wire connection for all measurements
} Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
} Variable step & ramp time in seconds
} Adjustable span selection (0 to 20mA or 4 to 20mA)For more information visit our web site at: www.tnp-instruments.com/lc110_milliamp_loop_calibrators.html
LC-100 Precision Process Milliamp Loop Calibrator for High Accuracy
Process Instrumentation Calibration
Features
} Very high accuracy ±0.015% of reading
} Very high resolution - 0.001mA/0.001V
} Error function eliminates manual error calculation
} Extended adjustment range digital knob and user-selectabledecade output allow both large and incremental (0.001mA step)
output changes
} Reads 0 to 28.000 VDC
} Built in 250 Ohm resistor facilitates calibration of HART devices
} Remote calibrations through Automatic Step and Ramp functions
} Simulates, powers, and measures two-wire transmitters
} Five preset outputs (4, 8, 12, 16, 20mA)For more information visit our web site at: www.tnp-instruments.com/lc100_milliamp_loop_calibrator.html
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Temperature & Process Calibrators
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
TC-100 Precision Thermocouple/mV Calibrator for High Accuracy
Temperature Calibration
Features
} High accuracy ±0.3°C (Type J T/C all errors combined)
} Ten (10) common T/C types plus mV (see chart below)
} Accepts both Thermocouple mini-plug and bare Thermocouple wires
} Simple decade control of output
} Three (3) setpoints for each Thermocouple type
} MIN/MAX recall in measure mode
} Input protection to 240 VAC
} Supplied in full protective rubber bootFor more information visit our web site at: www.tnp-instruments.com/tc100_thermocouple_calibrator.html
Low Cost MS-420 Mini Source 4 to 20 mA Process Loop Calibrator
Features
} Calibrates Chart Recorders
} Calibrates Process Loop Panel Meters
} Calibrates Data Acquisition Devices
} Calibrates Other Process Instruments
} Five preset outputs (4, 8, 12, 16, 20mA)For more information visit our web site at: www.tnp-instruments.com/ms420_mini_source_milliamp_loop_calibrator.html
DC80T Calibrator Source and Read Thermocouple and mV Signals
Features
} Measures and simulates eight different thermocouple types J, K, T, E,R, S, B and N
} Generates and measures electrical voltage (mV) in the -10 mV to+75mV range
} Temperature resolution 0.1°C; 1°C for Nobel TC
} Automatic cold junctions compensation (Cjc)
For more information visit our web site at: http://www.tnp-instruments.com/dc80t-thermocouple-calibrator.htmll
DC80R Simulate and Measure RTD Temperature and Ohm Signals
Process Calibrator
Features
} Measures and simulates SEVEN types of RTDs: Pt10, Pt50, Pt100(385), Pt100 (392), Pt200, Pt500 and Pt1000
} Generates and measures resistance values from 0 to 3200Ω
} Resolution: RTD 0.1°C/°F; Resistance 0.01/0.1Ω
} Accuracy of ±0.2°C for temperature
For more information visit our web site at: http://www.tnp-instruments.com/dc80r-rtd-ohm-calibrator.htmll
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Portable Dry Block Thermocouple and RTDTemperature Calibrator
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Laboratory grade performance at an economical price
} Wide temperature range of ambient +5°C/9°F to 400°C/752°F
} Store and recall up to 8 set-points
} Fast heat up and cool down
} Interchangeable Calibration Blocks
} Includes traceable calibration with data and calibration label
} Only 10 lbs. with insert
} Adjustable ramp rate for reliable thermal switch testing
} Advanced all digital controller with large bright display
For more information visit our web site at: www.tnp-instruments.com/thermcal400_portable_dry_block_calibrator.html
ThermCal 400 Portable Dry Block Temperature Calibrator Easily Calibrate
your Thermocouples, RTD's and Bi-Metal Thermometers Temperature
Sensors
Features
} Temperature range (ambient of 20°C) Operates -4°F to 266°F(-20°C to 130°C)
} Use as an Ice Point Reference Standard
} Store and recall up to 8 set-points
} Fast heat up and cool down
} Removable probe inserts for flexibility & many probe sizes
} Includes traceable calibration with data and calibration label
} Only 17 lbs. with insert
} CE marked for safety
} Advanced all digital controller with large bright display
For more information visit our web site at: http://www.tnp-instruments.com/ats3080-thermcal-130-block-calibrator.html
ThermCal 130 Portable Low Temperature Dry Block Calibrator Calibrate
Thermocouples, RTD's and Bi-Metal Thermometers Temperature
Sensors
Features
} Wide temperature range Ambient +45°F to 1292°F (+25°C to +700°C)
} Switch test functions
} Large multi-hole fixed block with slim inserts to match most common size probes
} Solid block giving unrivaled temperature uniformity
} Rapid heating and cooling rates
For more information visit our web site at: www.tnp-instruments.com/tecal700X_dry_block_calibrator.html
TECAL 700X High Temperature Dry Block Calibrator Easily Calibrate
your Thermocouples, RTD's Sensors and Bi-Metal Thermometers
Temperature Sensors
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Portable Dry Block Thermocouple and RTDTemperature Calibrator
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Low Temperature Range of -20ºC to 140ºC (-4ºF to +284ºF)
} Housed in a rugged case for field use
} RS-232 computer interface for data and program transfer, or real timecontrol
} High accuracy and stability for certifying temperature sensors andhydraulic thermostats
} Includes one multi-well insert
} Traceable calibration certificate
For more information visit our web site at: www.tnp-instruments.com/tecal_f_h_series_block_calibrators.html
TECAL 140F Low Temperature Dry Block Calibrator
Easily Calibrate your Thermocouples, RTD's and Bi-Metal Thermometers
Temperature Sensors
Features
} Medium Temperature Range of ambient +20 to +425ºC (797ºF)
} Housed in a rugged case for field use
} Large interchangeable insert format for flexibility of use
} Fast heat up and cool down times
} Improved uniformity and control stability of temperature zone} Highaccuracy and stability for certifying temperature sensors and hydraulic
thermostats
} Includes one multi-well insert
} Traceable calibration certificate
For more information visit our web site at: www.tnp-instruments.com/tecal_f_h_series_block_calibrators.html
TECAL 425F Medium Temperature Dry Block Calibrator
Calibrate your Thermocouples, RTD's and Bi-Metal Thermometers
Temperature Sensors
Features
} High Temperature Range of ambient +25 to 650ºC (1202ºF).)
} Housed in a rugged case for field use
} Large interchangeable insert format for flexibility of use
} Fast heat up and cool down times
} Improved uniformity and control stability of temperature zone
} High accuracy and stability for certifying temperature sensors andhydraulic thermostats
} Includes one multi-well insert
} Traceable calibration certificate
For more information visit our web site at: www.tnp-instruments.com/tecal_f_h_series_block_calibrators.html
TECAL 650F High Temperature Dry Block Calibrator
Calibrate your Thermocouples, RTD's and Bi-Metal Thermometers
Temperature Sensors
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Portable Dry Block Thermocouple and RTDTemperature Calibrator
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Low Temperature Range of -67°F to 285°F (-55°C to 140°C)
} Housed in a rugged case for field use
} Use as a Dry Block, a Liquid Bath, or as a Black body source forinfrared thermometers
} Fast heat up and cool down times
} Optional Black Body Source Insert for Calibration of InfraredThermometers
} Optional Stirred Liquid Bath Container
} Includes one multi-well insert
For more information visit our web site at: www.tnp-instruments.com/microcal_tcs_dry_block_calibrator.html
TCS 140 Low Temperature Dry/Wet Block Calibrator Calibrate your
Thermocouples, RTD's and Bi-Metal Thermometers Temperature Sensors
Features
} Medium Temperature Range of 95°F to 1200°F (35°C to 650°C)
} Housed in a rugged case for field use
} Use as a Dry Block, or as a Black body source for infrared thermometers
} Fast heat up and cool down times
} Optional Black Body Source Insert for Calibration of InfraredThermometers
} Ideal for fast Calibration of Thermocouple and RTD Sensors
} Includes one multi-well insert
For more information visit our web site at: www.tnp-instruments.com/microcal_tcs_dry_block_calibrator.html
TCS 650 Medium Temperature Block Calibrator Calibrate your
Thermocouples, RTD's and Bi-Metal Thermometers Temperature Sensors
Features
} High Temperature Range of 300°F to 2190°F (150°C to 1200°C)
} Housed in a rugged case for field use
} Use as a Dry Block, or as a Black body source for infraredThermometers
} Optional Black Body Source Insert for Calibration of InfraredThermometers
} Fast heat up and cool down times
} Excellent Stability and Accuracy
} Includes one multi-well insert
For more information visit our web site at: www.tnp-instruments.com/microcal_tcs_dry_block_calibrator.html
TCS 1200 High Temperature Calibrator Calibrate your Thermocouples,
RTD's and Bi-Metal Thermometers Temperature Sensors
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Pressure Calibration Instrumentation
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Integrated battery operated pneumatic pump generates high vacuum (-12 PSI/-0.8Bar) to 300 PSI/20 Bar
} 5 ranges of 30 PSI, 150 PSI and 300 PSI gauge and 30 PSI and 150 PSIabsolute. The 300 PSI version uses a manually operated hand pump
} Accuracy of 0.025% of full scale on pressure measurement
} Source or measure 4 to 20mA including 2 wire transmitter simulation
} Pressure displayed in the user’s choice of 16 engineering units
} External pressure module interface supports all 29 BetaPort-P pressuremodules using optional BPPA-100 module adapter
} Pt100 RTD input for temperature measurement, accurate to 0.2°F (0.1°C)(measurement only)
or more information visit our web site at: www.tnp-instruments.com/BetaGauge_330_Hand_Held_Pressure_calibrator.html
BetaGauge 330 Hand Held High Performance Pressure Calibrator with
Integrated Electric Pump
Features
} One isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
} BetaGauge 311A-EX Intrinsically Safe Ex ia IIB T3 Gb (Ta=–10 to +45°C)
} 27 available pressure ranges
} Pt100 RTD input for temperature measurement, accurate to 0.1°C (0.2°F)
} Large graphic style LCD with backlight can be configured to display up to 3inputs simultaneously
} Measure 4-20 mA input
} Pressure displayed in the user’s choice of 17 engineering units plus custom
} Up to five frequently used setups can be stored; last setup automaticallyrecalled on power-up
} External pressure module connection supports all BetaPort-P pressure modules (27 ranges) for even more measurement capability (unavailable on
Ex unit)
For more information visit our web site at: www.tnp-instruments.com/betagauge-311-A-pressure-calibrator.html
BetaGauge 311A/311A-EX Single Sensor Pressure Calibrators
Features
} Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
} BetaGauge 321A-EX Intrinsically Safe Ex ia IIB T3 Gb (Ta=–10 to +45°C)
} 27 available pressure ranges
} Pt100 RTD input for temperature measurement, accurate to 0.1°C (0.2°F)
} Large graphic style LCD with backlight can be configured to display up to 3inputs simultaneously
} Measure 4-20 mA input
} Pressure displayed in the user’s choice of 17 engineering units plus custom
} Up to five frequently used setups can be stored; last setup automaticallyrecalled on power-up
For more information visit our web site at: www.tnp-instruments.com/betagauge-321-A-pressure-calibrator.html
BetaGauge 321A/321A-EX Dual Sensor Pressure Calibrators
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Pressure Calibration Instrumentation
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} General Accuracy of ±0.05% of F.S. (± 0.04% of Reading for ReferenceClass Verse)
} Temperature compensated accuracy over 0 to 50°C
} 17 standard pressure ranges available
} Large, back-lit, 5-1/2 digit display with 0.65" high digits and 20 segmentbar graph
} Adjustable TARE zeros large system offsets
} Low battery indicator CSA intrinsically safe, Class 1, Div. 2 Groups A,B, C & D;
} ATEX approved; CE approved
} User-configurable damping smooth's readings from pulsating/plant airsources
For more information visit our web site at: www.tnp-instruments.com/BetaGauge_pi_pro_digital_pressure_calibration_test_gauge.html
BetaGauge PI PRO Digital Pressure Calibration Test Gauge
Features
} General Accuracy of ±0.05% of F.S. (± 0.04% of Reading for ReferenceClass Verse)
} Temperature compensated accuracy over 0 to 50°C
} 17 standard pressure ranges available
} Large, back-lit, 5-1/2 digit display with 0.65" high digits and 20 segmentbar graph
} Adjustable TARE zeros large system offsets
} Low battery indicator CSA intrinsically safe, Class 1, Div. 2 Groups A,B, C & D;
} ATEX approved; CE approved
} User-configurable damping smooth's readings from pulsating/plant airsources
For more information visit our web site at: http://www.tnp-instruments.com/PIR-PRO-BetaGuage-test-gauge.html
BetaGauge PIR PRO Digital Pressure Calibration Test Gauge
Features
} 29 standard ranges
} Gauge, vacuum, absolute, compound, and differential measurements
} Accuracy specified over 15°C to 35°C range
} Isolated and non-isolated measurements, range dependent
} 025% full scale accuracy
} Includes NIST Certificate with calibration dataFor more information visit our web site at: www.tnp-instruments.com/mc1010_mc1210_calibrator_pressure_gauges.html
BetaGauge High Accuracy Pressure Modules for DMC-1410, MC-1010,
MC-1210 Multifunction Calibrator
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Pressure Calibration Instrumentation
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Generate both pressure and vacuum
} Operating Pressure Range: -12 to 100 PSI
} Maximum Working Pressure: 150 PSI
} Completely isolated vernier prevents heat transfer from hand
} Precision valve for bleed control
} Compatibility airFor more information visit our web site at: http://www.tnp-instruments.com/mecp100-pressure-calibration-pump.html
MECP 100 Hand Operated Pneumatic Pressure Calibration Pump
Features
} Generate both pressure and vacuum
} Operating Pressure Range: -12 to 100 PSI
} Maximum Working Pressure: 150 PSI
} Completely isolated vernier prevents heat transfer from hand
} Precision valve for bleed control
} Compatibility airFor more information visit our web site at: http://www.tnp-instruments.com/mecp500-pressure-calibration-pump.html
MECP 500 Hand Operated Hydraulic Pressure Calibration Pump
Features
} Generate pressure
} Operating Pressure Range 0 to 10,000 PSI
} Maximum Working Pressure 10,000 PSI
} Completely isolated vernier prevents heat transfer from hand
} Precision valve for bleed control
} Compatibility most hydraulic fluids, oils and distilled waterFor more information visit our web site at: http://www.tnp-instruments.com/mecp10k-hydraulic-pressure-calibration-pump.html
MECP10K Hand Operated Hydraulic Pressure Calibration Pump
Features
} Generate -14 psi (-0.9bar) to 2000 psi (140bar) by hand
} Precision vernier allows fine adjustment at both high and lowpressures
} Vent valve offers precise control and vents at the pressure connection to prevent pump contaminates
} Use as both a portable or bench-top pump
} Double output manifold with 1/4 NPT female fittings includes BSP adapters
For more information visit our web site at: www.tnp-instruments.com/mecp2000_pneumatic_high_pressure_pump.html
MECP 2000 Portable High Speed High Pressure Pneumatic Hand Pump
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Pressure ManometersCalibration Instrumentation
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Dual input with ±120" H2O range
} 0.001" H2O maximum resolution
} Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
} Display 5 digit with backlight
} Smooth Stabilizes display when measuring fluctuating pressures
} Auto Off: Conserve battery power
For more information visit our web site at: http://www.tnp-instruments.com/tpi621-dual-input-differential-manometer.html
TPI 621 Dual Input Differential Manometer
Features
} 0.001 inH2O/kPa resolution to ±9.999 inH20/kPa input
} High accuracy ±0.02 inH2O less than 2 inH20; 1% above 2 inH20
} Temperature compensated
} Overpressure protection to +/- 50 inH20
} Trim mode to stabilize fluctuating pulse readings
} Seven units of measure
For more information visit our web site at: http://www.tnp-instruments.com/tpi-623-high-resolution-digital-manometer.html
TPI 623 Dual Input High Resolution Digital Manometer
Features
} Differential input with ±100 PSI range
} Differential input with 29 PSI range
} Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
} 4 digit dual line display with backlight
For more information visit our web site at: http://www.tnp-instruments.com/tpi-665-differential-manometer.html
TPI 665 Differential Pressure Manometer
Features
} Can be used in non-corrosive liquid applications
} Differential input with ±100psi range
} Differential input with 29 PSI range
} Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
For more information visit our web site at: http://www.tnp-instruments.com/tpi-665l-differential-manometer.html
TPI 665L Differential Pressure Manometer Can Be Used In Non-Corrosive
Liquid Applications
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Combustion Gas Analyzer for Residential &Commercial HVAC Boilers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Combustion Analyzer for O2, CO, CO2, Excess Air, Efficiency
} Ambient Carbon Monoxide (CO) Leak Detector
} Draft and Built-In Differential Pressure Manometer
} Thermometer (Ambient, Flue & Incoming Air)
} 2 Channel Thermometer
} 300 Internal Test Memory and PC Software Included to downloadtests & customer database (keep records, export & email)
} Easy to use with direct ONE Button Operation For more information visit our web site at: www.tnp-instruments.com/BTU700_Combustion_Flue_Gas_Analyzer.html
BTU 700 Economical Residential Combustion Analyzer for Complete
Boiler and Burners Set-Ups, Servicing & Maintenance
Features
} 2 and 3 Gas Models
} Combustion Analyzer for O2, CO, CO2, Excess Air, Efficiency
} Carbon Monoxide (CO) Leak Detector
} Built-In Differential Pressure Manometer
} Automatic Outdoor Air Temp. & High Efficiency Calculations(Condensing Systems)
} All models come with O2, CO, CO2, the BTU 900-3 and 3P includesNO/NOx
} ALL BTU900 Kits come with 600 Internal Test Memory
} Optional Wireless Bluetooth™ Printer (Standard with “P” Models)For more information visit our web site at: http://www.tnp-instruments.com/combustion_emission_analyzers.html
BTU 900 Series Professional Portable Multifunctional Combustion Flue
Gas Analyzers for Complete Boiler and Burners Set-Ups, Servicing &
Maintenance
Features
} Measure Oxygen, Carbon Monoxide, Carbon Dioxide, CO/CO2 Ratio,Calculates boiler combustion efficiency, Gas Leak Sensor
} Store function to save up to 50 readings
} Data Logging with time and date stamp
} Pump driven for fast response
} Built-in differential manometer with 0.001" H2O resolution
} Built-in differential thermometer
} Will not shut off if 15ppm CO is present for increased safety
} Large easy to read backlit display For more information visit our web site at: www.tnp-instruments.com/TPI712_Combustion_Flue_Gas_Analyzer.html
TPI 712 Combustion Flue Gas Analyzer for Boiler Maintenance and
Efficiency Analyzer with Datalogging and Optional Infrared Printer
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Combustion Gas Analyzer for Residential &Commercial HVAC Boilers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Two Models to Choose From
} Combustion Analyzer for Oxygen, Carbon Monoxide, Carbon Dioxide,Excess Air, Efficiency along with all of the necessary temperature,
draft and pressure measurements
} New Full COLOR Graphic Display
} Built-In NON-THERMAL Printer
} } Automatic Outdoor Air Temp. & High Efficiency Calculations(Condensing Systems)
} 2000 Test Points Internal Memory
} BTU-1500-OIL Includes Smoke Oil KitFor more information visit our web site at: http://www.tnp-instruments.com/btu1500-1-combustion-flue-gas-analyzer.html
BTU 1500 Series Residential Portable Multifunctional Combustion Flue
Gas Analyzers
Features
} Measure Oxygen, Carbon Monoxide, Nitric Oxide, Calculate NOx,CO/CO2 Ratio
} Calculates Boiler Combustion Efficiency
} Store function to save up to 50 readings
} Data Logging with time and date stamp
} Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil,Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
} Optional A740 IR printer available for hard copies of test resultsFor more information visit our web site at: www.tnp-instruments.com/TPI714_Combustion_Flue_Gas_Analyzer.html
TPI 714 Combustion Flue Gas Analyzer With Nitric Oxide for Boiler
Maintenance and Efficiency Analyzer with Datalogging and Optional
Infrared Printer
Features
} Built-in differential manometer with 0.001" H2O resolution
} Calculates combustion efficiency
} Data Logging with time and date stamp
} Will not shut off if 15 ppm CO is present for increased safety
} Communicate to a PC via the USB interface
} Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil,Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
} Optional A740 IR printer available for hard copies of test resultsFor more information visit our web site at: www.tnp-instruments.com/TPI716_Combustion_Flue_Gas_Analyzer.html
TPI 716 Combustion Analyzer for Flue Gas Boiler Maintenance and
Efficiency Analyzer with Datalogging and Optional Infrared Printer
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Combustion Gas Analyzer for Residential &Commercial HVAC Boilers
Features
} Measure Oxygen, Carbon Monoxide, Nitric Oxide, Calculate NOx,CO/CO2 Ratio
} Store function to save up to 50 readings
} Data Logging with time and date stamp
} Pump driven for fast response
} Built-in differential manometer with 0.001" H2O resolution
} Built-in differential thermometer
} Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil,Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
For more information visit our web site at: www.tnp-instruments.com/TPI716N_Combustion_Flue_Gas_Analyzer.html
TPI 716N Combustion Flue Gas Analyzer With Nitric Oxide for Boiler
Maintenance and Efficiency Analyzer with Datalogging and Optional
Infrared Printer
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Five Models to Choose From
} Combustion Analyzer for Oxygen, Carbon Monoxide, Carbon Dioxide,Excess Air, Efficiency along with all of the necessary temperature,
draft and pressure measurements
} New Full COLOR Graphic Display
} Built-In NON-THERMAL Printer
} Two Channel Thermometer
} 2000 Test Points Internal Memory
} ALL Gas Sensors are Pre-Calibrated and Field Replaceable For more information visit our web site at: http://www.tnp-instruments.com/combustion_emission_analyzers.html
E5500 Features
} Up to 5 Gas Sensors: O2, CO, NO, NO2, SO2 (Electrochemical)
} Low NOx and Total (NO + NO2) NOx Measurements
} Wireless Communications with Computer & other Windows Devices
E8500 Features
} Up to 9 Gas Sensors: O2, CO, NO, NO2, SO2, H2S (Electrochemical)CO2, CxHy, High CO (NDIR)
} Low NOx and “True” NOx Measurements
} Built–in Thermoelectric Chiller with Automatic Condensate Removal
Please call us for more information, specification and to obtain a
quote.
E 4500 Series Professional Portable Multifunctional Combustion Flue
Gas Analyzers with Up to Four Gas Sensors
E5500 and E8500 Portable Industrial Combustion Gas & Emissions
Analyzer
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Hand Held and Portable Indoor Air Quality(IAQ) and Test Instruments
Features
} Available in two models, CO2 range PPM or 0 to 20%
} Up to 11 Multiple Parameters - CO2, CO, % RH, Temp, VOC, O2, NO2,Ozone, SO2, H2S, Barometric Pressure
} Active Internal Sampling Pump
} Large Internal Memory for REAL-TIME Continuous Data Logging forGraphs, Data Review, IAQ reports
} Wireless Communications with Bluetooth For more information visitour web site at: www.tnp-instruments.com/AQ_expert_portable_indoor_air_quality_meter.html
AQ-Expert Portable Indoor Air Quality Monitor Providing the latest in
Monitoring for IAQ testing in Hospitals, Buildings, Schools, Labs, Clean
Rooms, Airports
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} REAL-TIME Continuous Data Logging for Graphs, Data Review, IAQreports
} Wireless Communications with Bluetooth
} Active Internal Sampling Pump
} PC Software & USB Included
} Barometric Air Pressure
} Light Weight, Durable, and Easy–to–Transport Design
} Large Internal Memory
} Li-Ion Rechargeable BatteryFor more information visit our web site at: http://www.tnp-instruments.com/AQ-PRO-indoor-air-quality-meter.html
AQ PRO Environmental Indoor Air Quality Meter Customize with UP TO
3 Gas Sensor ParametersMultiple Parameters - Up to 6 Simultaneously (Customize to YOUR Needs)
CO2, CO, % RH, Temp, Formaldehyde (CH2O), O2, NO, SO2, H2S, NO/NOx,
Barometric Pressure, Air Velocity
Features
} Measure 4 Parameters - Volatile Organic Compounds (VOC) Sensor,% Relative Humidity, Ambient Temperature and Barometric Pressure
} 2000 Points Internal Memory for REAL-TIME Continuous DataLogging for Graphs, Data Review, IAQ reports
} Wireless Communications with Bluetooth
} Active Internal Sampling Pump
} PC Software & USB Included
} Light Weight, Durable, and Easy–to–Transport Design
} Li-Ion Rechargeable BatteryFor more information visit our web site at: http://www.tnp-instruments.com/aq-pro-v-indoor-air-quality-meter.html
AQ PRO-VOC Environmental Indoor Air Quality Meter Kit WITH Volatile
Organic Compounds (VOC) SensorChoice of (1) VOCs Sensor Range: VOCs (0-20,000 ppb) (0-20 ppm) or VOCs
(0-200 ppm) Sensor. Add UP TO 2 More Gas Sensors Including Formaldehyde (CH2O)
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Hand Held and Portable Indoor Air Quality(IAQ) and Test Instruments
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Active Internal Sampling Pump
} Measurement Parameter - Carbon Dioxide (CO2)
} Active Internal Sampling Pump
} Light Weight, Durable, and Easy–to–Transport Design
} Easy to Use Menu System with Easy Built-in, Menu-driven CalibrationProcedure
For more information visit our web site at: www.tnp-instruments.com/AQ_comfort_indoor_air_quality_meter.html
AQ COMFORT-1 Portable Indoor Air Quality Monitoring Kit with Carbon
Dioxide (CO2) Range 0 to 5000 ppm
Features
} Measurement Parameter - Carbon Dioxide (CO2) and AmbientTemperature
} Active Internal Sampling Pump
} Light Weight, Durable, and Easy–to–Transport Design
} Easy to Use Menu System with Easy Built-in, Menu-driven CalibrationProcedure
For more information visit our web site at: http://www.tnp-instruments.com/AQ-comfort-2-indoor-air-quality-meter.html
AQ COMFORT-2 HVAC Indoor Air Quality Kit Measure Carbon Dioxide
(CO2) and Ambient Temperature
Features
} Measurement Parameter - Carbon Dioxide (CO2), % Relative Humidity,Ambient Temperature, Wet Bulb & Dew Point and Differential Pressure
} Large Internal Memory (2000 points) for REAL-TIME Continuous DataLogging for Graphs, Data Review, IAQ reports
} Active Internal Sampling Pump
} Wireless Communications with Bluetooth
} Easy to Use Menu System with Easy Built-in, Menu-driven CalibrationProcedure
For more information visit our web site at: http://www.tnp-instruments.com/aq-comfort-3-indoor-air-quality-meter.html
AQ COMFORT-3 Indoor Air Quality Meter Measure Carbon Dioxide (CO2),
Relative Humidity, Temperature and Pressure
Features
} Measurement Parameter - Carbon Dioxide (CO2), Carbon Monoxide(CO), % Relative Humidity, Temperature, Differential Pressure
} Large Internal Memory (2000 points) for REAL-TIME Continuous DataLogging for Graphs, Data Review, IAQ reports
} Active Internal Sampling Pump
} Wireless Communications with Bluetooth
} Easy to Use Menu System with Easy Built-in, Menu-driven CalibrationProcedure
For more information visit our web site at: http://www.tnp-instruments.com/aq-comfort-co-indoor-air-quality-meter.html
AQ COMFORT-4 Indoor Air Quality Meter with Carbon Dioxide (CO2)
0 to 5000 ppm and CO 0 to 200 ppm Ranges
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Hand Held and Portable Indoor Air Quality(IAQ) and Test Instruments
Features
} Carbon Dioxide (CO2) Measurement 0 to 5000 ppm
} Measure Ambient Temperature -5°F to 140°F (-20°C to 60°C)
} CO2 Alarm Audible and Visual, selectable level
} Data Logging Up to 50 samples
} Record and display min, max & average values
} New! Print to optional printer Model A740 Infrared Printer
} Designed to meet the needs of testing professionals in ANY AirQuality applications
For more information visit our web site at: www.tnp-instruments.com/tpi-1008a-indoor-air-quality-meter.html
TPI 1008A Indoor Air Quality (IAQ) Meter Measure Carbon Dioxide and
Ambient Temperature
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Calculate percent outside air to maintain acceptable CO2 levels inbuildings and work spaces
} Measure and display Carbon Dioxide (CO2) and Carbon Monoxide
} Measure ambient air temperature
} Measure relative humidity, dew point and wet bulb
} Log up to 4,000 readings in 1 second to 1 hour intervals
} Download to a computer using the A368 USB cable
} New! Print via to optional Infrared printer (Model A740)
For more information visit our web site at: www.tnp-instruments.com/aq_pro_indoor_air_quality_meter.html
TPI 1010A Multifunction Indoor Air Quality Measure CO2, CO, RH and %
Outside Air
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Thermo-Anemometers Air Flow and DigitalHygrometer/Psychrometer Instruments
Features
} Measure air velocity, air flow and temperature
} Five units of measure for air velocity m/s, km/hr, mile/hr, knots and ft/min
} Two units of measure for air flow cfm and cmm
} Four digit dual line display simultaneously shows air flow and temperature
} Data record displays minimum, maximum and average readings
} Data log up to 1000 readings in 1 second to 999 second intervals
For more information visit our web site at: http://www.tnp-instruments.com/556c1-air-velocity-air-flow-meter.html
TPI 556C1 Digital Air Velocity / Air Flow Meter
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Increased versatility, uses both hot wire and vane type probes
} Measure air velocity and temperature simultaneously
} Record, minimum, maximum and average
} Data hold
} Auto power off (10 min.)
} Low battery display
} Multiple units of measure: (m/s, k/h, mile/h, knots, ft./min)
For more information visit our web site at: http://www.tnp-instruments.com/575C1-combination-vane-hot-wire-anemometer.html
TPI 575C1 Combination Vane and Hot Wire Anemometer
Features
} Measure Relative Humidity (RH) 0% to 100% and Temperature 40°F to 122°F (-40°C to 50°C)
} Increased versatility, uses both hot wire and vane type probes
} Small diameter (0.45") probe for measuring inside air ducts
} Relative humidity (RH) accuracy of ±2% provides reliable readings
} Measure dew point and wet bulb temperature
} Data record function stores minimum and maximum humidity and temperature measurements
For more information visit our web site at: http://www.tnp-instruments.com/597C1-digital-hygrometer-psychrometer.html
TPI 597C1 Digital Hygrometer/Psychrometer
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Humidity, Dew Point, Temperature, Instruments
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Available as a Humidity Only Transmitter or with Temperature andHumidity Transmitter
Measuring Range: 2% to 98%RH
} High Accuracy: ±2.5%RH, ±0.3°C
} NIST-Traceable
} Waterproof Enclosure For more information visit our web site at:www.tnp-instruments.com/ht500_Series_temperature_humidity_transmitters.html
HT500 Series Economical Wall-Mount Relative Humidity and Temperature
Transmitters with 4 to 20mA or 0 to 1Vdc Outputs
Features
} Choose either the HP140-IS Duct Mounted or HP150-IS Wall MountedModels
} Intrinsically-Safe 2-Wire 4 to 20mA Humidity Transmitter
} High Accuracy (0.1%) For more information visit our web site at:www.tnp-instruments.com/HP140_HP150_Intrinsically_safe_humidity_transmitters.html
HP140/HP150-IS Intrinsically Safe Wall or Duct Mounted Relative
Humidity Transmitters
Features
} Microprocessor Based Temperature and Humidity Transmitter
} Field Configurable with Optional TxConfig PC Interface and theWindows® Based Software
} Two-wire loop powered 4 to 20mA, 20 to 4mA or Voltage output 0 to10Vdc
} Isolated 4 to 20mA outputs, Non-isolated 0 to 10Vdc outputs
} Programmable from 0 to 100%RH or from 100 and 103°C for dew point
For more information visit our web site at:http://www.tnp-instruments.com/rht-wm-temperature-humidity-transmitter.html
RHT-WM Wall Mounted Humidity and Temperature 2-wire 4 to 20mA or
0 to 10Vdc Transmitter
Features
} Microprocessor Based Temperature and Humidity Transmitter
} Field Configurable with Optional TxConfig PC interface and theWindows® based software
} Three Probe Lenghts Available 150mm, 250mm or 400mm Long (400mm with 4 to 20ma Output Only)
For more information visit our web site at:http://www.tnp-instruments.com/rht-dm-duct-mounted-humidity-temp-transmitter.html
RHT-DM Duct Mounted Humidity and Temperature 2-wire 4 to 20mA or
0 to 10Vdc Transmitter
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Temperature and Process Controllers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Field-Configurable Universal Inputs
} User-Selectable Ramp to Setpoint
} 8 Level Ramp/Soak Control
} Bumpless Auto/Manual Transfer
} NEMA 4X (IP65) Dust and Splash-Proof Front Panel
} Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
} On/Off through Full PID Operation (P,PI,PD,PID)For more information visit our web site at:www.tnp-instruments.com/16C_Temperature_Process_Controller.html
Series 16C 1/16 DIN Autotune with 8 Level Ramp and Soak
Temperature/Process Controller
Features
} Accepts Thermocouple, RTD or Process Signal Inputs
} Bumpless Auto/Manual Transfer
} NEMA 4X (IP65) Dust and Splash-Proof Front Panel
} On/Off through Full PID Operation (P,PI,PD,PID)
} Auto-Tuning, Heat or Cool
} Adjustable Hysteresis and Heat/Cool Spread
} cUL and CE ApprovalsFor more information visit our web site at:www.tnp-instruments.com/16_Series_Temperature_Process_Controller.html
Legacy Series 16 1/16 DIN Universal Autotune Temperature/Process
Controller
Features
} Accepts Thermocouple, RTD or Process Signal Inputs
} User-Selectable Ramp to Setpoint
} Bumpless Auto/Manual Transfer
} NEMA 4X (IP65) Dust and Splash-Proof Front Panel • On/Off through Full PID Operation (P,PI,PD,PID)
• Auto-Tuning, Heat or Cool
• Adjustable Hysteresis and Heat/Cool Spread
For more information visit our web site at:www.tnp-instruments.com/25_Series_Temperature_Process_Controller.html
Legacy Series 25 1/4 DIN Universal Autotune Temperature/Process
Controller
Features
} All Solid-State Design
} No Maintenance Required
} Choose from Zero Crossing or Phase Angle Models
} Supplied with 3.6" or 5.5" Heat Sink
} Soft-Start Optional on PC Phased Angle Series For more information visit our web site at:www.tnp-instruments.com/PC-ZC-solid-state-relays.html
ZC and PC Series Solid State SSR Contactors Power Controller
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Temperature and Process Panel Meters and Indicators
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Programmable Input Thermocouple Types: K,J,L,T,U, E,R,S,B, C,D,N, RTD: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu10,
Cu100; mV and Ohm
} High accuracy (±0.1%)
} 4-Digit, ½" High LED Readout
} Completely-Linearized
} Optional "Point N' Click" Software for Field Programming For more information visit our web site at: www.tnp-instruments.com/mp95800_temperature_process_panel_meter.html
Mp95800 Programmable Microprocessor Based 1/8 DIN Digital Panel
Meter for Thermocouple, RTD, mV and Ohm Input
Features
} No External Power Required Loop-Powered
} Ideal for use with Thermocouple, RTD and Pressure Transmitters
} Easy-to-Scale
} 3 ½ Digit LCD Display for Local Signal Indication
} 1/8 DIN Panel Meter
} High Accuracy For more information visit our web site at: www.tnp-instruments.com/pm5600_ma_loop_powered_panel_meter.html
PM 5600 Loop Powered 1/8 DIN Panel Mount Process Meter Ideal for use
with 4 to 20 mA Transmitters for Local Temperature Indication
Features
} No External Power Required Loop-Powered
} Ideal for use with Thermocouple, RTD and Pressure Transmitters
} Easy-to-Scale
} Weather-Proof Housing (IP 65)
} Optional Ex ia IIC T4 Intrinsically Safe
} High Accuracy For more information visit our web site at: www.tnp-instruments.com/pm5625_ma_loop_powered_panel_meter.html
PM 5625 Loop Powered Weatherproof Loop Process Indicator Ideal for
use with 4 to 20 mA Transmitters for Local Temperature Indication in
Wash Down Areas
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Temperature and Process Panel Meters and Indicators
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Accepts thermocouples type J, K, T, E, N, R, S and B; 3-wire Pt100RTD, 4 to 20mA, 0 to 50mV and 0 to 10Vdc
} Six digit 13mm ultra bright LED display
} Accepts and linearizes non-linear 4 to 20mA signals from thermocouple transmitters
} Standard 24Vdc output for field transmitters
} Programmable scaling from -1999 to +9999 and adjustable digital filter
} Selectable decimal point for Pt100, 4 to 20mA and 0 to 50mV
For more information visit our web site at:http://www.tnp-instruments.com/n1500-18DIN-panel-meter.html
N1500 Programmable Thermocouple, RTD and milliamp 1/8 DIN Panel
Meter
Features
} Accepts thermocouples J, K, T, E, N, R, S, B, RTD Pt100, 0 to 50mV, 0 to 5Vdc, 0 to 10Vdc, 0 to 20mA and 4 to 20mA
} Temperature in °C or °F
} Bright 14mm display
} Two relay alarms SPST 1.5A/240 Vac Standard
} USB Interface for configuration and monitoring
} Programmable indicating range from -1999 to 9999
} Auxiliary 24 Vdc voltage source
For more information visit our web site at:http://www.tnp-instruments.com/n1540-18DIN-temperature-process-meter.html
N1540 1/8 DIN Programmable Temperature Process Panel Meter with
USB Communication Port
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Head Mounted 2-wire 4 to 20mA ProgrammableTemperature Transmitters
Features
} Microprocessor-Based, HART® Protocol
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} RFI/EMI-Immune
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H)
For more information visit our web site at: www.tnp-instruments.com/mp82700h_hart_protocol_programable_transmitter.html
Mp82710H HART® Protocol Head Mounted Programmable 2-Wire
4 to 20mA Temperature Transmitter
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} Now with ATEX Ex II 1 G Ex ia IIC T4...T6 Ga Approval Standard
} RFI/EMI-Immune
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H)
For more information visit our web site at: www.tnp-instruments.com/mp82700_programmable_temperature_transmitter.html
Mp82710 Head Mounted Programmable 2-Wire 4 to 20mA Temperature
Transmitter
Features
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} Now with ATEX Ex II 1 G Ex ia IIC T4...T6 Ga Approval Standard
} RFI/EMI-Immune
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H)
For more information visit our web site at: http://www.tnp-instruments.com/mp82810-linearized-thermocouple-rtd-transmitter.html
MP82810 Thermocouple and RTD Linearized 2-wire 4 to 20mA
Temperature Transmitter
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Head Mounted 2-wire 4 to 20mA ProgrammableTemperature Transmitters
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Programmable for 5 Thermocouple Types Input
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} RFI/EMI-Immune
} High Accuracy 0.1%
} New Small Size 43mm Dia. x 27mm H. (1.69" x 0.75")For more information visit our web site at: www.tnp-instruments.com/mp82800_programable_transmitter.html
Mp82830-T Series Programmable Head Mounted Thermocouple
Linearized Temperature Transmitter 2-Wire 4 to 20mA Output
Features
} Pt100, Pt250, Pt500, Pt1000, Ni100, Ni500 and Ni1000 RTD Input
} Field Programmable with optional Programming Kit and PC Software
} Fully Linearized
} RFI/EMI-Immune
} New Small Size 43mm Dia. x 27mm H. (1.69" x 0.75")
For more information visit our web site at: www.tnp-instruments.com/mp82800r_rtd_programmable_head_mounted_transmitter.html
Mp82830-R Programmable Head Mounted 2-Wire 4 to 20mA Temperature
Transmitter Pt100 RTD Input
Features
} Programmable Thermocouples J, K, T, E, N, R, S, B and 2,3 or 4 wire Pt100 RTD's
} Isolated 1000 Vac for 1 minute between input and output
} Linearized 2-Wire Loop powered 4 to 20 mA or 20 to 4 mA output
} USB micro-B port allows direct PC connection for configuration
} Optional USB Cable and Windows configuration software
For more information visit our web site at: http://www.tnp-instruments.com/txisopack-usb-temperature-transmitter.html
TxIsoPack-USB Isolated and Linearized Programmable Thermocouple
and RTD Temperature Transmitter
Features
}Programmable Thermocouples J, K, T, E, N, R, S, B and 2,3 or 4 wire Pt100 RTD's
} Linearized 2-Wire Loop powered 4 to 20 mA or 20 to 4 mA output
} USB micro-B port allows direct PC connection for configuration
} Optional USB Cable and Windows configuration software
For more information visit our web site at: http://www.tnp-instruments.com/txblock-usb-temperature-transmitter.html
TxBlock-USB Linearized Programmable Thermocouple and RTD 2-wire
4 to 20mA Temperature Transmitter
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
MP88000 Series Din Rail Mounted 2-wire 4 to20mA Programmable Temperature Transmitters
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Microprocessor-Based, HART® Protocol
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} RFI/EMI-Immune
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H) For more information visit our web site at: www.tnp-instruments.com/mp88700h_din_rail_hart_transmitter.html
Mp88700H HART® Protocol Din Rail Mounted Programmable 2-Wire
4 to 20mA Temperature Transmitter
Features
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} FM or ATEX Approvals Available
} RFI/EMI-Immune
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H) For more information visit our web site at: www.tnp-instruments.com/mmp88700_din_rail_transmitter.html
Mp88700 Series Din Rail Mounted Programmable 2-Wire 4 to 20mA
Temperature Transmitter
Features
} Universal Input - Thermocouples, RTD's, millivolts and Ohm
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} RFI/EMI-Immune
} FM or ATEX Approvals Available
} High Accuracy 0.1%
} Small Size (1.7" dia. x 1.1"H) For more information visit our web site at: www.tnp-instruments.com/mp88800_din_rail_transmitter.html
Mp88800 Series Programmable Din Rail Mounted Thermocouple and RTD
Linearized Temperature Transmitter 2-Wire 4 to 20mA Output
Features
} Pt100 RTD Input
} Field Programmable with optional Programming Kit and PC Software
} Fully-Isolated and Linearized
} RFI/EMI-Immune
} FM or ATEX Approvals Available
} High Accuracy 0.1%For more information visit our web site at: www.tnp-instruments.com/mp88800r_din_rail_transmitter.html
Mp88800R Programmable Din Rail Mounted 2-Wire 4 to 20mA
Temperature Transmitter Pt100 RTD Input
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Industrial Portable Refrigerant and Combustible Gas Leak Detectors
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Capable of detecting all existing refrigerants and blends including404A, PURON® and R-507 (AZ50®)
} Fully adjustable tic rate to eliminate background concentration andpinpoint leaks
} One hand operation
} Field replaceable sensor tips for easy maintenance For more information visit our web site at: www.tnp-instruments.com/750_753_refrigerant_leak_detectors.html
Industrial TPI 750A Portable Refrigerant Leak Detector
With 0.02 Oz/yr. Sensitivity
Features
} Capable of detecting all existing refrigerants and blends including404A, PURON® and R-507 (AZ50®)
} Fully adjustable tic rate to eliminate background concentration andpinpoint leaks
} One hand operation
} Field replaceable sensor tips for easy maintenance For more information visit our web site at: www.tnp-instruments.com/753a_refrigerant_leak_detectors.html
Industrial TPI 753A Portable Refrigerant Leak Detector
with 0.1 Oz/yr. Sensitivity
Features
} Detect combustible gasses including Methane, Propane, NaturalGas, LPG, Hydrocarbons, etc.
} Visual LED screen & Audible Alarms
} Rugged, accurate, and highly sensitive
} Auto Zero - Drift Adjustment
} Quick Response Time
} 11" Flexible probe to reach inaccessible places For more information visit our web site at: www.tnp-instruments.com/7899_combustible_Gas_leak_detector.html
Industrial 7899 Hand Held Combustible Gas Leak Detector with Easy To
Read Large LCD Display
Warning and Precaution
The Combustible GAS detector is a leak locating tool and is not intended for use as a confined-space, personal
safety tool. It will not specifically identify a gas or a CFC, and it does not tell you the precise level of a
combustible gas or CFC that may be present.
High concentrations of combustible gas/CFC can cause explosions, fires, asphyxia, and other hazards that could cause
serious personal injury or death. Be informed on the characteristics and hazards of the gas/CFC you are working with,
and use proper precautions to avoid hazardous atmospheres.
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Industrial PortableCombustible Gas Leak Detectors
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Gases Detected (partial listing): Acetone, Acetylene, Alcohol, Ammonia,Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen,
Methane, Naphtha, Natural Gas, Paint Thinners, Propane and Solvents
} Instant response
} 10ppm (methane) Sensitivity
} Adjustable tic rate
} Audio and Visual alarm indication with user adjustable alarm point For more information visit our web site at: www.tnp-instruments.com/720B_combustible_Gas_leak_detector.html
Industrial TPI 720B Economical Portable Combustible Gas Leak Detector
Features
} Combustible Gas Leak Detector capable of displaying real ppm, steppedppm, and %LEL (Lower Explosive Limit)
} Gases Detected (partial listing): Acetone, Acetylene, Alcohol, Ammonia,Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen,
Methane, Naphtha, Natural Gas, Paint Thinners, Propane and Solvents
} Instant response
} 10ppm (methane) Sensitivity
} Adjustable tic rate
} Audio and Visual alarm indication with user adjustable alarm point For more information visit our web site at: www.tnp-instruments.com/721_combustible_Gas_leak_detector.html
Industrial TPI 721 Portable Combustible Gas Leak Detector with
Bargraph LCD Display
Features
} Combination Ambient Carbon Monoxide and Combustible Gas LeakDetector
} Gases Detected (partial listing): Acetone, Acetylene, Alcohol, Ammonia,Benzene, Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen,
Methane, Naphtha, Natural Gas, Paint Thinners, Propane and Solvents
} 2 Line LCD Display
} Auto and Manual Zero
} Visible and Audible High and Low Alarm Included
} Flexible 16" gooseneck For more information visit our web site at: www.tnp-instruments.com/775_carbon_monoxide_combustible_Gas_leak_detector.html
Industrial TPI 775 Multifunction Hand Held Combustible Gas Detector
and Ambient Carbon Monoxide
Warning and Precaution
The Combustible GAS detector is a leak locating tool and is not intended for use as a confined-space, personal
safety tool. It will not specifically identify a gas or a CFC, and it does not tell you the precise level of a
combustible gas or CFC that may be present.
High concentrations of combustible gas/CFC can cause explosions, fires, asphyxia, and other hazards that could cause
serious personal injury or death. Be informed on the characteristics and hazards of the gas/CFC you are working with,
and use proper precautions to avoid hazardous atmospheres.
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Industrial Portable Refrigerant and Combustible Gas Leak Detectors
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Gases Detected (partial listing): Methane, Natural Gas, Ammonia,Hydrogen, Butane, Propane, Acetone, Gasoline, Halon, Jet Fuel,
Refrigerants, Ethylene Oxide, Lacquer Thinner, Industrial Solvents
} Designed to meet UL 913 intrinsic safety (Approval Pending)
} Combustible Gas Leak Detector capable of displaying ppm or %LEL(Lower Explosive Limit)
} 10ppm (methane) Sensitivity
} nstant response
} Electronic tick rate control
} Audio and Visual alarm indication with settable alarm
} 16" Length Flexible Goose Neck Probe
For more information visit our web site at: www.tnp-instruments.com/hxg-2d-combustible-gas-leak-detector.html
HXG-2D Sensit® Combustible Gas Leak Detector
Features
} Gases Detected (partial listing): Methane, Natural Gas, Ammonia,Hydrogen, Butane, Propane, Acetone, Gasoline, Halon, Jet Fuel,
Refrigerants, Ethylene Oxide, Lacquer Thinner, Industrial Solvents
} UL 913 intrinsic safety rating*
} Combustible Gas Leak Detector capable of displaying ppm or %LEL(Lower Explosive Limit)
} 10ppm (methane) Sensitivity
} Instant response
} Electronic tick rate control
} Audio and Visual alarm indication with settable alarm
} 16" Length Flexible Goose Neck Probe
For more information visit our web site at: www.tnp-instruments.com/hxg-3-is-combustible-gas-leak-detector.html
HXG-3 UL 913 Intrinsic Safety Rating Combustible Gas Leak Detector
Warning and Precaution
The Combustible GAS detector is a leak locating tool and is not intended for use as a confined-space, personal
safety tool. It will not specifically identify a gas or a CFC, and it does not tell you the precise level of a
combustible gas or CFC that may be present.
High concentrations of combustible gas/CFC can cause explosions, fires, asphyxia, and other hazards that could cause
serious personal injury or death. Be informed on the characteristics and hazards of the gas/CFC you are working with,
and use proper precautions to avoid hazardous atmospheres.
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Handheld and Portable Non-Contact InfraredThermometers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Three Models to Choose From
} Low Temperature range from 32 to 2352°F(0 to 1300°C)
} High Temperature ranges from 725 to 3252°F (385 to 1800°C)
} High optical resolution 300:1
} Precise aiming with dual laser and scope sighting
} Adjustable emissivity from 0.100 to 1.000
} MAX/MIN function and audible alarm
} USB interface, PSC Connect RSoftware Included
} Data logger for 2000 measured values For more information visit our web site at: www.tnp-instruments.com/PSC_PTLST_20_Series_documenting_infrared_thermometer.html
PTLST-20-1M/2M Portable Documenting Infrared Thermometer
Designed For Demanding High Temperature Industrial Applications
Features
} Two Models to Choose From
} Sharp adjustable focus with precision optics
} Temperature range 1112 to 5432°F (600 to 3000°C) or 1652 to5432°F (900 to 3000°C)
} Read temperature in viewfinder or on large LCD display
} Communication software (optional)
} Data logging up to 1000 temperature readings For more information visit our web site at: www.tnp-instruments.com/psc_90_portable_infrared_thermometer.html
PSC-90 Series High Performance Portable Documenting Infrared
Thermometer Designed For Demanding High Temperature Industrial
Applications
Features
} Wide Temperature Range -30 to 1650°F (-35 to 900°C)
} Maximum, Minimum, Differential, Hold and Average Reading
} Alarm Functions Visual and Audible High/Low
} USB Interface and Type K Thermocouple Connector
} Adjustable Emissivity
} Laser Sighting Standard
} Comfortable Ergonomic Design For more information visit our web site at: www.tnp-instruments.com/psc_plst_infrared_thermometer.html
PSC PLST Handheld Portable Non-Contact Infrared Thermometer with
LC Flip Display, Crosshair Laser Sighting - The Alternative to Thermal
Imagers
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Handheld Non-Contact Infrared Thermometers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Wide Temperature Range -20 to 1400°F (-32 to 760°C)
} Maximum, Minimum, Differential and Offset Reading
} Alarm Functions Visual and audible High/Low
} USB Communication Interface and Type K Thermocouple Connector
} Laser Sighting Standard
} Adjustable Emissivity
} Comfortable Ergonomic DesignFor more information visit our web site at: www.tnp-instruments.com/psc_plms_pro_infrared_thermometer.html
PLMS-PRO Handheld Portable Non-Contact Infrared Thermometer with
Laser Sighting, USB Communication Interface and Adjustable Emissivity
Features
} Wide Temperature Range -20 to 980°F (-32 to 530°C)
} Adjustable Emissivity
} Maximum, Minimum, Differential and Offset Reading
} Alarm Functions Visual and audible High/Low
} Comfortable Ergonomic Design
} Easy to Use Just a "Click" to Measure
} Quick Immediate Response
} Laser Sighting Standard For more information visit our web site at: www.tnp-instruments.com/psc_plms_Plus_infrared_thermometer.html
PLMS-PLUS Handheld Portable Non-Contact Infrared Thermometer with
Laser Sighting and Adjustable Emissivity
Features
} Wide Temperature Range -20 to 768°F (-32 to 420°C)
} Fixed Emissivity (Preset at 0.95)
} Comfortable Ergonomic Design
} Easy to Use Just a "Click" to Measure
} Quick Immediate Response
} Laser Sighting Standard
} Large Backlight LCD DisplayFor more information visit our web site at: www.tnp-instruments.com/psc_plms_infrared_thermometer.html
PLMS Handheld Portable Infrared Thermometer with Laser Sighting and
Fixed Emissivity
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Hand Held Digital RTD and Thermocouple Thermometers
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Temperature Range: -58 to 320°F (-50 to 160°C) or -58 to 572°F(-50 to 300°C)
} 12" or 18" Integral RTD Probe
} High accuracy (± 0.06°C)
} High resolution (0.001°C) Programmable
} Includes NIST Traceable Calibration Certificate
} Fast response Adjustable Angle RTD Probe
} Data logging with optional BetaLOGTM TI software
} Temperature trend indicator
} Rugged and reliable
} Hazardous area use rating
} EFI/RFI standard compliant
} Compact and lightweight For more information visit our web site at: www.tnp-instruments.com/betaprobe_TI_high_precision_digital_thermometer.html
BetaProbe TI Precision Thermometers with Adjustable Angle RTD Probe,
Integral 12" or 18" Long Probe Rotates 90° For Any Angle Reading of the
Display
DC80T Calibrator Source and Read Thermocouple and mV Signals
Features
} Measures and simulates eight different thermocouple types J, K, T, E,R, S, B and N
} Generates and measures electrical voltage (mV) in the -10 mV to+75mV range
} Temperature resolution 0.1°C; 1°C for Nobel TC
} Automatic cold junctions compensation (Cjc)
For more information visit our web site at: http://www.tnp-instruments.com/dc80t-thermocouple-calibrator.htmll
DC80R Simulate and Measure RTD Temperature and Ohm Signals
Process Calibrator
Features
} Measures and simulates SEVEN types of RTDs: Pt10, Pt50, Pt100(385), Pt100 (392), Pt200, Pt500 and Pt1000
} Generates and measures resistance values from 0 to 3200Ω
} Resolution: RTD 0.1°C/°F; Resistance 0.01/0.1Ω
} Accuracy of ±0.2°C for temperature
For more information visit our web site at: http://www.tnp-instruments.com/dc80r-rtd-ohm-calibrator.htmll
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
IndustrialSolar Radiation Meters are Ideal for Testing,Monitoring and Optimizing Solar Panels
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Measure solar radiation (irradiance)
} Use to find the optimal angle of inclination for installing solar panels
} Measure light intensity through windows
} Determine the effectiveness of solar film/window tint
} Displays results in W/m2 or BTU/(ft2*h)
} 0 to 1999 W/m2 (0 to 634 BTU) range
} Measurable light sources, including all visible light
For more information visit our web site at: http://www.tnp-instruments.com/tpi510-solar-irradiance-meter.html
TPI 510 Hand Held Solar Irradiance Meter
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
Industrial Test ToolsTachometers, Moisture Meters, Clamp-On and DMM
Temperature & Process Instruments Inc. Visit us on the web at www.tnp-instruments.com
1767 Central Avenue * Suite 112 * Yonkers * NY * USA * 10710 * Phone: (914)673-0333 Fax: (866) 292-1456
Features
} Non-contact (photo/optical) and contact RPM and surface speed
} Wide Measuring Range 0.5 to 30,000 RPM
} Last measurement, maximum measurement and minimum measurement automatically saved and recalled
For more information visit our web site at: http://www.tnp-instruments.com/tpi505-photo-contact-tachometer.html
TPI 505 Combination Contact/Non-Contact Portable Compact Digital
Tachometer
Features
} Non-contact Laser and contact RPM and surface speed
} Wide Measuring Range 0.5 to 30,000 RPM
} Mutifunctions : Photo Tach & Contact Tach & Surface Speed
} Last measurement, maximum measurement and minimum measurement automatically saved and recalled
For more information visit our web site at: http://www.tnp-instruments.com/tpi505l-photo-contact-tachometer.html
TPI 505L Combination Contact/Non-Contact Portable Compact Digital
Tachometer
Features
} Large 4000 count Backlit Display with Analog Bargraph
} True RMS for more accurate measurements
} Auto/manual ranging
} Duty cycle to measure the amount of time the motor is on
} Low pass filter for noisy environmentsFor more information visit our web site at: www.tnp-instruments.com/183A_digital_multimeter.htmltml
TPI 183A True RMS Digital Multimeter Industrial 4000 Count True RMS
Multimeter
Features
} True RMS Provides accurate and dependable readings of non-linear loads.
} HDR Mode Determines if a signal is clean or distorted.
} Bar Graph When measuring frequency, bar graph indicates current level.
} TRIM Mode Smooth out unstable readings.
} Peak Mode For start-up and inrush currents.
} Sleep Mode Preserves battery life. For more information visit our web site at: www.tnp-instruments.com/183A_digital_multimeter.htmltml
TPI 296 AC/DC True RMS Digital Clamp Meter Industrial True RMS 700
Amp Clamp-On Meter and DMM
TEMPERATURE
&
PROCESS
INSTRUMENTS
INC
General Terms and Conditions
WE GLADLY ACCEPT YOUR OFFER, BUT THIS ACCEPTANCE IS EXPRESSLY MADE CONDITIONAL ON ASSENT TO OUR ADDITIONAL AND
DIFFERENT TERMS AND CONDITIONS.
The following are the terms and conditions ("Terms and Conditions") for the sale of products ("Products") by Temperature & Process Instruments, Inc.. to
Temperature & Process Instruments, Inc.'s customers ("Customers ").
1. ORDERS. Orders will be initiated by Customer issuing a purchase order to Temperature & Process Instruments, Inc.. Orders must identify the Products,
unit quantities, part numbers, descriptions, applicable prices. Orders are subject to Temperature & Process Instruments, Inc.'s acceptance. Temperature &
Process Instruments, Inc. reserves the right to limit quantities and to refuse to deal with any person.
2. PRICES. Orders are quoted and billed at the prices (in US dollars) in effect at the time of shipment. The web site reflects the latest pricing information
available at the time they were posted, all prices are subject to change without notice. Nonstandard Products will be sold at the prices set out in the relevant
quotation supplied by Temperature & Process Instruments, Inc.
Prices do not include federal, state and local sale, use, excise and similar taxes that apply to Products, which Customer will also pay at the applicable rate
unless an original signed tax exemption certificate is received by Temperature & Process Instruments, Inc.
3. TERMS OF PAYMENT. Temperature & Process Instruments, Inc. accepts major credit cards. Credit cards accepted are MasterCard, Visa, American
Express and Discover.
4. DELIVERY AND TITLE. All shipments by Temperature & Process Instruments, Inc. are FOB point of shipment from Temperature & Process Instruments,
Inc.'s facility and the amount of all shipment charges shall be paid to Temperature & Process Instruments, Inc. by Customer in addition to the purchase price
of the Products. Selection of the carrier and delivery route will be made by Temperature & Process Instruments, Inc. unless specifically designated by
Customer. Temperature & Process Instruments, Inc. will aim to initiate shipment and deliver the Products as close as possible to Customer's requested
delivery date(s). Customer acknowledges that shipment and delivery dates provided by Temperature & Process Instruments, Inc. are estimates only and that
Temperature & Process Instruments, Inc. will not be liable for failure to achieve such dates. Delivery to a carrier will constitute delivery to Customer, and risk
of loss of or damage to the Products will pass to Customer at this point. Title to the Products shall remain with Temperature & Process Instruments, Inc. until
payment in full for the Products by Customer
5. CANCELLATIONS, RETURNS. Customer may, without charge, cancel an order for standard Products provided the order is scheduled for shipment by
Temperature & Process Instruments, Inc. more than 45 days after Temperature & Process Instruments, Inc. receives written notice of cancellation from
Customer. Customer may only cancel an order for standard Products scheduled for shipment by Temperature & Process Instruments, Inc. within 45 days
after Temperature & Process Instruments, Inc. receives written notice of cancellation if accepted by Temperature & Process Instruments, Inc. in its sole
discretion, which acceptance may be subject to Customer accepting a cancellation fee determined by Temperature & Process Instruments, Inc.. Customer
may only reschedule an order if accepted by Temperature & Process Instruments, Inc. in its sole discretion. Orders may not be cancelled or rescheduled after
delivery by Temperature & Process Instruments, Inc. to the carrier. Customer may not cancel orders for nonstandard Products. Non-standard Products
include, without limitation, Products which are special orders, products which do not appear on the web site, products not customarily in stock, value-added
products, products to be assembled from kit form, opened software, and products identified as otherwise non-cancelable and non-returnable ("NCNR").
Customer is deemed to have accepted the Products unless written notice of rejection is received by Temperature & Process Instruments, Inc. at time of deliv-
ery. Authorization to return Products must be obtained from Temperature & Process Instruments, Inc., which authorization may be granted by Temperature &
Process Instruments, Inc. in its sole discretion. If granted, Temperature & Process Instruments, Inc. will issue Customer a return material authorization
("RMA") number. No return of Products will be accepted without an RMA number. Returned Products must be in original shipping cartons and must be com-
plete with all packing materials and in re-sellable condition. Return freight charges must be prepaid by Customer. Temperature & Process Instruments, Inc. will
not be responsible for returned Products lost in transit. Product returned due to Customer error may be subject to a restocking fee. All items not eligible for
return will be returned to Customer, transportation collect. Non-standard Products may not be returned.
6. LIMITED WARRANTY. Temperature & Process Instruments, Inc. warrants to Customer that Products purchased hereunder will conform to the applicable
manufacturer's specifications for such Products. If Temperature & Process Instruments, Inc. breaches this warranty, Customer's remedy is limited to (at
Temperature & Process Instruments, Inc.'s election) (1) refund of Customer's purchase price for such Products (without interest), (2) repair of such Products,
or (3) replacement of such Products; provided that such Products must be returned to Temperature & Process Instruments, Inc., along with acceptable
evidence of purchase, within 10 days from date of delivery, transportation charges prepaid. No warranty will apply if the Product has been subject to misuse,
static discharge, neglect, accident or modification. Temperature & Process Instruments, Inc. will transfer to Customer all transferable warranties which
Temperature & Process Instruments, Inc. receives from the manufacturer of the Products. Details of these warranties can be made available to Customer on
request. SAVE AS EXPRESSLY PROVIDED IN THESE TERMS AND CONDITIONS, ALL IMPLIED WARRANTIES, TERMS AND CONDITIONS (WHETHER
STATUTORY OR OTHERWISE) ARE EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW. IN PARTICULAR, TEMPERATURE & PROCESS
INSTRUMENTS, INC. MAKES NO WARRANTY RESPECTING THE MERCHANTABILITY OF THE PRODUCTS OR THEIR SUITABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE OR USE OR RESPECTING INFRINGEMENT.
7. LIMITATION OF LIABILITIES. CUSTOMER SHALL NOT BE ENTITLED TO, AND TEMPERATURE & PROCESS INSTRUMENTS, INC. SHALL NOT BE
LIABLE FOR, LOSS OF PROFIT, PROMOTIONAL OR MANUFACTURING EXPENSES, OVERHEADS, BUSINESS INTERRUPTION COSTS, LOSS OF
DATA, REMOVAL OR REINSTALLATION COSTS, INJURY TO REPUTATION OR LOSS OF CUSTOMERS, PUNITIVE DAMAGES, IPR INFRINGEMENT,
LOSS OF CONTRACTS OR ORDERS OR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. CUSTOMER'S
RECOVERY FROM TEMPERATURE & PROCESS INSTRUMENTS, INC. FOR ANY CLAIM SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE
AFFECTED PRODUCTS IRRESPECTIVE OF THE NATURE OF THE NATURE OF THE CLAIM WHETHER IN CONTRACT, TORT, WARRANTY, OR OTH-
ERWISE.
8. PUBLISHED INFORMATION. Temperature & Process Instruments, Inc. makes every effort to ensure the accuracy of the information published on its web
site. However, Temperature & Process Instruments, Inc. makes no representations about the information presented, which is provided "as-is" without warranty
of any kind. Product specifications and availability are subject to change without prior notice.
9. LIMITATIONS OF USE. PRODUCTS SOLD BY TEMPERATURE & PROCESS INSTRUMENTS, INC. ARE NOT RECOMMENDED OR AUTHORIZED FOR
USE IN LIFE SUPPORT, SURGICAL IMPLANTATION, NUCLEAR OR AIRCRAFT APPLICATIONS OR FOR ANY USE OR APPLICATION IN WHICH THE
FAILURE OF A SINGLE COMPONENT COULD CAUSE SUBSTANTIAL HARM TO PERSONS OR PROPERTY. Customer agrees that using or selling
Products for use in such applications is done at its own risk, and agrees that Temperature & Process Instruments, Inc. and the manufacturer of the Products
are not liable for any claim or damage arising from such use. Customer agrees to fully indemnify, defend and hold harmless Temperature & Process
Instruments, Inc. and the manufacturer of the Products from and against any and all claims, damages, loss, cost, expense or liability arising out of or in
connection with the use or performance of Products in such applications. Use of software will be subject to the terms of any accompanying end user license.
10. STATEMENTS AND ADVICE. If statements or advice (technical or otherwise, and whether or not provided by Temperature & Process Instruments, Inc.'s
technical support) are offered or given to Customer, such statements or advice will be deemed to be given as an accommodation to Customer and without
charge and Temperature & Process Instruments, Inc. will have no responsibilities or liabilities whatsoever for the content or use of such statements or advice.
11. FORCE MAJEURE. Temperature & Process Instruments, Inc. will not be liable for delays in delivery or for failure to perform its obligations due to causes
beyond its reasonable control, including, but not limited to, product allocations, material shortages, labor disputes, transportation delays, unforeseen circum-
stances, acts of God, acts or omissions of other parties, acts or omissions of civil or military authorities, Government priorities, fire, strikes, floods, severe
weather conditions, computer interruptions, terrorism, epidemics, quarantine restrictions, riots, or war. Temperature & Process Instruments, Inc.'s time for
delivery or performance will be extended by the period of such delay or Temperature & Process Instruments, Inc. may, at its option, cancel any order or
remaining part thereof without liability by giving notice to Customer.
12. EXPORT CONTROLS. Products purchased are subject to export control laws, restrictions, regulations and orders of the United States. Customer agrees
to comply with all applicable export laws, restrictions and regulations of the United States or foreign agencies or authorities, and shall not export, or transfer
for the purpose of re-export, any product to any prohibited or embargoed country or to any denied, blocked, or designated person or entity as mentioned in
any such United States or foreign law or regulation. Customer represents and warrants that it is not on the Denied Persons, Specially Designated Nationals or
Debarred Persons List and is not otherwise prohibited by law from purchasing the products or services hereunder. Customer shall be responsible for obtaining
any required license to export, re-export or import.
13. GENERAL. The Terms and Conditions may not be modified or cancelled without Temperature & Process Instruments, Inc.'s written agreement. Any
provision hereof which is prohibited or unenforceable in any jurisdiction shall, as to such jurisdiction, be ineffective to the extent of such prohibition or
unenforceability without invalidating the remaining provisions hereof in that jurisdiction or affecting the validity or enforceability of such provision in any other
jurisdiction. The provisions set out in these Terms and Conditions are for the sole benefit of the parties hereto, and confer no rights, benefits or claims upon
any person or entity not a party hereto.