Post on 26-Jan-2022
www.berdisled.com
B0101-01/2.5F
Technical ApplicationGuide for Berdis LightingLED Spotlight
www.berdisled.com sales2@berdisled.com
Application notes
•The lamp must be installed by professional
electrician.
•Ensure the power supply is switched off before
fitting this product
•Keep away from corrosive gas
It is designed for general lighting applications in home,office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as
stairway, lobby, reception, corridors etc.
Certificate
Introduction
B0101-01 model is an ultra slim spotlight provide a wide range of applications.
and perfect combination of light efficiency,light comfort and design.
Features
1. Super slim design LED spotlight with Reflector/lens. 2. External driver and junction box facilitate easy installation.
3. Good heat dissipating to ensure long life.
4. Triac / DALI / 0-10V Dimmable version options.
5. Fitting Color:white sandblasted,black sandblasted,nickel brushed.
6. Shape of Housing Options: Round and square.
6. Color Temperature Options: 2700K;Dim to warm;3000K;4000K;6000K; RGBW APP Smart control with TUYA;3000-6000K APP Smart control with TUYA
www.berdisled.com sales2@berdisled.com
60
85
75 326
41
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
5/7/9W Ⅱ IP21/54/65 -20oC~45oC 0~90% -20oC~65oC
Product Information
Technical Specifications
Model Voltage PowerPowerFactor
Beamangle
DimmableLumen(±5%)
CCT Lifespan CRI Dimension
B0101-01 AC100-277V 5W ≥0.5 60° No
465 2700K
50,000h ≥90Ø85*26mm
cutout 75mm
475 3000K
480 4000K
485 6000K
AC200-240V 5W ≥0.9 60° Yes
2700K
50,000h ≥903000K
4000K
6000K
AC100-277V 7W ≥0.5 60° No
2700K
50,000h ≥903000K
4000K
6000K
AC200-240V 7W ≥0.9 60° Yes
670 2700K
50,000h ≥90680 3000K
685 4000K
690 6000K
Driver data Sheet(Flicker-free Driver)Driver Type Reverse-phase Dimming Non dim
Input rated Voltage AC100-277V
Frequency 50/60Hz
Input Voltage AC90-305V
Efficiency ≥92%
Wattage 5W 5W
Power Factor ≥0.5
Rated input current ≤0.1A ≤0.1A
Full load output Voltage DC14-25V DC25-42V
Rated output current 260mA 135mA
Output current range 260mA±5% 135mA±5%
Power tolerance
Current output tolerance
Dimming range —
Dimmer —
Short circuit protection
Over voltage protection
Over temperature protection
Ø85*26mm cutout 75mm
Ø85*26mm cutout 75mm
Ø85*26mm cutout 75mm
B0101-01
B0101-01
B0101-01
7W
≤0.1A
DC14-25V
260mA
260mA±5%
AC100-277V
50/60Hz
AC90-305V
≥92%
7W
≥0.5
≤0.1A
DC25-42V
135mA
135mA±5%
—
—
460
470
475
480
675
685
690
695
Dim to Warm
5W
≤0.1A
DC14-25V
260mA
260mA±5%
3 Steps Current
AC230V
50Hz
AC200-240V
≥90%
5W
≥0.9
≤0.1A
DC14-25V
260mA
260mA±5%
±5%
±5%
10%-100%
RPC
PASS
PASS
PASS
7W
≤0.1A
DC14-25V
260mA
260mA±5%
9W
≤0.1A
DC14-25V
260mA
260mA±5%
AC200-240V 7W ≥0.9 60°Dim to
440-201800K 50,000h ≥97
Ø85*26mm cutout 75mmB0101-01
2800-Warm
Dim to Warm Healthy Lightness
Brightness change from 100% to 10%
when CCT change from 2800K to 1800K
at the same time.
Dim to warm version is big range used
We have this dim to warm version controled with TUYA
system on mobile phone as well.
at homes and hotels.
Please consult to us if you have inquiry on smart control
dim to warm version.
①
②②
③③
for indoor use only
for indoor use only,include bathroom.
for indoor use only,include shower room.
www.berdisled.com sales2@berdisled.com
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Lif
eti
me (
ho
urs
)
Capacitor Tc (oC)
Driver Lifetime
% L
um
ino
us
Flu
x
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.0000
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
LED Light Decay Rate
Temperature
● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
80
70
60
50
40
30
20
10
0
18:3
7:4
619:0
7:4
419:3
7:4
420:0
7:4
420:3
7:4
421:0
7:4
421:3
7:4
422:0
7:4
423:0
7:4
423:3
7:4
40:0
7:4
40:3
7:4
41:0
7:4
41:3
7:4
42:0
7:4
42:3
7:4
43:0
7:4
43:3
7:4
44:0
7:4
44:3
7:4
45:0
7:4
45:3
7:4
46:0
7:4
46:3
7:4
47:0
7:4
47:3
7:4
48:0
7:4
48:3
7:4
49:0
7:4
4
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(oC
)
Time
• Ip21:no water-proof ring .
• Ip54 :water-proof ring①
• Ip65 :water-proof ring①②③
030
60
90
120
150-/+180
-150
-120
-90
-60
-30
Distribution Curve of Meridian
Unit: cd— c0 /180— c30/210— c60/240— c90/270
550
440
330
220
110
Reflector Versions
Half-Intensity Angle:24°
030
60
90
120
150-/+180
-150
-120
-90
-60
-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270
440
352
264
176
88
Half-Intensity Angle:45°
030
60
90
120
150-/+180
-150
-120
-90
-60
-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270
320
256
192
128
64
Half-Intensity Angle:60°P.S.:This is the beam angle
we default for normal shipping.
Distribution Curve of Meridian Lens Versions
030
60
90
120
150-/+180
-150
-120
-90
-60
-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270
2800
2240
1680
1120
560
Half-Intensity Angle:15°
030
60
90
120
150-/+180
-150
-120
-90
-60
-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270
1700
1360
1020
680
340
Half-Intensity Angle:21°
Unit: cd— c0 /180— c30/210— c60/240— c90/270
Half-Intensity Angle:32°
Unit: cd— c0 /180— c30/210— c60/240— c90/270
Half-Intensity Angle:46°
30
60
90
120
150-/+180
-150
-120
-90
-60
-30 1300
1040
780
520
260
30
60
90
120
150-/+180
-150
-120
-90
-60
-30 750
600
450
300
150
Packaging Information
SIZE(CM)N.W/pc(KGS)
G.W.(KGS) Q'TY(PCS)
Carton 52.5*21.5*37 0.25 13 50
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer
683 34150 28
40'' standardcontainer
1366 68300 56
www.berdisled.com sales2@berdisled.com Phone: +86 133 8096 1319Add: 6F building 2, NO.48, Donghou road, , Xinhui District, Jiangmen China
Installation
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 25mm
6. Make sure the downlight fixed tightly in ceiling, turn on the power.
1. Open a hole according to the cutout size of led downlight.
2. Open the junction box cover, see Figure 1. (Model dependent):
Figure 1
3. Put the main AC wire through line pressing clip, feed the L.N to the fast connection terminal block respectively then compress the line pressing clip.
4. Close the junction box cover tightly,then put junction box
5. Hold back spring clips then push downlight into the hole.
Blue
BrownL =
N =
and driver into the hole.