Transcript of TECH 50800 Project Title:Customer Service management in automotive industries Improve Phase Date:...
- Slide 1
- Slide 2
- TECH 50800 Project Title:Customer Service management in
automotive industries Improve Phase Date: Team member: Ponnappa
Bheemaiah
- Slide 3
- Brief Review of Project Charter
- Slide 4
- SIPOC
- Slide 5
- Voice of the Customer Analysis Before taking up this project
the complaint was a reactive customer voice. In this process we
apply proactive customer voice analysis
- Slide 6
- CTQ Tree(s)
- Slide 7
- Process Map New car concern Service manager Service advisor
Service techniciansTest drive Problem Sorted out Vehicle Delivered
To customer No Yes No Yes
- Slide 8
- Process Observation Worksheet
- Slide 9
- Checksheet
- Slide 10
- Spaghetti Diagram
- Slide 11
- Data Collection Bar chart showing the data collection
- Slide 12
- Graphs T test, value of p=0.0388 Hence Clock time and task time
are closely related.
- Slide 13
- TECH508 Analyze Step
- Slide 14
- TECH508 Improve/Implement Step Solution matrix
- Slide 15
- Pilot implementation plan
- Slide 16
- TECH508 Control Step 1. Standardized process improvements New
car concern Service advisor Service technicians Test drive Problem
Sorted out Vehicle Delivered To customer No Yes Final check/
Inpector
- Slide 17
- Control Plan
- Slide 18
- Diffusion Plan
- Slide 19
- TECH508 Conclusions 1. Root cause was analyzed for customer
dissatisfaction using six sigma tools. 2. Tools used increases the
effectiveness and the efficiency of the service process. 3.
Improvement in the service quality. 4. Improves customer loyalty to
the company. 5. Improvement in service quality index.