Post on 19-Oct-2020
University of Bath
PHD
Synthesis in the shikimate area
Diston, Simon
Award date:1995
Awarding institution:University of Bath
Link to publication
Alternative formatsIf you require this document in an alternative format, please contact:openaccess@bath.ac.uk
General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright ownersand it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.
• Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal ?
Take down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediatelyand investigate your claim.
Download date: 27. Mar. 2021
SYNTHESIS IN THE SHHOMATE AREA
Submitted by
Simon Diston
for the degree of Ph.D.
of the University of Bath
1995
COPYRIGHT
Attention is drawn to the fact that copyright of this thesis rests with its author. This
copy of the thesis has been supplied on condition that anyone who consults it is
understood to recognise that its copyright rests with its author and that no quotation
from the thesis and no information derived from it may be published without the prior
written consent of the author.
This thesis may not be consulted, photocopied or lent to other libraries without the
permission of the author and Zeneca for three years from the date of acceptance of the
thesis.
UMI Number: U601739
All rights reserved
INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted.
In the unlikely event that the author did not send a complete manuscript and there are missing pages, these will be noted. Also, if material had to be removed,
a note will indicate the deletion.
Dissertation Publishing
UMI U601739Published by ProQuest LLC 2013. Copyright in the Dissertation held by the Author.
Microform Edition © ProQuest LLC.All rights reserved. This work is protected against
unauthorized copying under Title 17, United States Code.
ProQuest LLC 789 East Eisenhower Parkway
P.O. Box 1346 Ann Arbor, Ml 48106-1346
TV DF
2 3 AUG 1996 J ~
■ OUPi0! 6pi-.
Dedicated to my Mother and Father
for their love and support.
ACKNOWLEDGEMENTS
The work described in this thesis was carried out in the Organic Chemistry
Department of the University of Bath between October 1991 and September 1994.
Financial support from the Science and Engineering Research Council and Zeneca
Agrochemicals, is gratefully acknowledged.
I am most grateful to Prof. Malcolm Campbell and Prof. Malcolm Sainsbury, my
supervisors, not only for handing me this project but for their constant source of
encouragement and ideas. I am indebted to my industrial supervisor Dr. Terry Lewis
for his patience, interest, and helpful discussions.
My appreciation goes to the technical staff at the University of Bath for their
invaluable services. Special thanks go to Mr. John Bradley and Mr. Russell Barlow
(organic stores), Mr. Dave Wood and Mr. Harry Hartnell (n.m.r. spectroscopy), Mr.
Alan Carver (elemental microanalysis), Mr. Chris Cryer (mass spectrometry), Mrs. Jo
Curtis, and especially to June and Freda .
I am also obliged to everybody I worked with during my three month placement at
Zeneca Agrochemicals for their help and advice.
Finally, I must thank my good friends Matthew Sage, Alan Graham, Kevin Williams,
Christopher Howarth and especially Christopher Lacy and Andrew Gaskell for
keeping me sane. Matthew Fletcher, Aparecida Kawamoto, Derradji Boumrah and
Anne Hackett for their help and support in the lab and everyone else I worked with
for being there when I needed them.
ABSTRACT
The shikimate pathway is the major biosynthetic route by which plants and
micro-organisms produce the aromatic amino acids and a plethora of other natural
products. The details of the pathway are discussed in Chapter 1, together with a
review of the recent syntheses of shikimic acid and of later intermediates in the
shikimate pathway.
Our synthesis of analogues of shikimic acid, which are of interest as potential
enzyme inhibitors, is described in Chapter 2. Starting from shikimic acid, two routes
to our a-methylene lactone are discussed as well as a route to the (3-methylene
lactone. Simple protective steps followed by the subsequent bromination at C-5 to
give the 5a-bromoshikimate then treatment with an allyl stannane prepared from
methyl methacrylate gave us the required “carba-chain” at C-5. The second route
involves the use of Berchtold’s e p o x i d e ^ to generate 5p-iodoshikimate and 50-
bromoshikimate which are then reacted with the allylstannane to give the a and p
lactones.
Full experimental details for the preparation of these compounds are given in
Chapter 3.
ABBREVIATIONS
Ac acetyl
ACN azobis(cyclohexone carbonitrile)
AcOH acetic acid
ADP adenosine diphosphate
AIBN azobis(isobutyronitrile)
aq aqueous
ATP adenosine triphosphate
BF3.Et2 0 boron trifluoride etherate
Boc fer/-butoxycarbonyl
Bn benzyl
BSA bis(trimethylsilyl)acetamide
Bu butyl
cat. catalytic
C.I. chemical ionisation
conc. concentrated
5 deformation
DAHP 3-deoxy-D-arabinoheptulosonic acid
DBU 1,8-diazabicyclo[5,4.0]undec-7-ene
DCC 1,3-dicyclohexylcarbodiimide
DCM dichloromethane
DEAD diethyl azodicarboxylate
DEPT Distortionless Enhancement by Polarisation Transfer
DHQ dehydroquinate
D EAL diisobutylaluminium hydride
DMAP 4-dimethylaminopyridine
DMF dimethylformamide
DMPU l,3-dimethyl-3,4,5,6-tetrahydro-2[lH]-pyrimidinone
DMSO
E.I.
5-EPS
5-EPS-3-P
eq
Et
EtOAc
F.A.B.
HMPA
hr
*Pr
i.r.
KO*Bu
LDA
lit.
LUMO
m-CPBA
Me
MEM
MeOH
min
m.p.
m.s.
Ms
NAD+, NADH
NADP+, NADPH
NBS
NMO
dimethylsulfoxide
electronic ionisation
5 -enolpyruvylshikimate
5-enolpyruvylshikimate-3-phosphate
equivalent
ethyl
ethyl acetate
fast atomic bombardment
hexamethylphosphoramide
hour
isopropyl
infrared spectroscopy
potassium fer/-butoxide
lithium diisopropylamide
literature
lowest unoccupied molecular orbital
/wefa-chloroperbenzoic acid
methyl
2-methoxyethoxymethyl
methanol
minute
melting point
mass spectroscopy
methanesulphonyl mesyl
nicotinamide adenine dinucleotide, reduced form
nicotinamide adenine dinucleotide phosphate, reduced
form
A-bromosuccinimide
4-methylmorpholine A-oxide
n.m.r. nuclear magnetic resonance
Ns /?-nitrob enzenesulphony 1
PCC pyridinium chlorochromate
PEP phosphoenol pyruvate
Ph phenyl
2-phosphate, PO3
PPTS pyridinium /?-toluenesulphonate
Pr propyl
p -TSA /?ara-toluenesulfonic acid
py pyridine
r f retention factor
RT room temperature
SN 1 substitution nucleophilic unimolecular
Sn 2 substitution nucleophilic bimolecular
SOMO singularly occupied molecular orbital
TBAF tetrabutylammonium fluoride
TBDMS /er/-butyldimethylsilane
Tf trifluoromethanesulfonate (triflic)
THF tetrahydrofuran
TFA trifluoroacetic acid
Ts />-toluenesulphonyl (tosyl)
T.l.c. thin layer chromatography
TMS trimethylsilyl (or trimethylsilane as n.m.r. standard)
TMSOTf trimethylsilyl trifluoromethanesulfonate
Tol tolyl
For spectral data:
n.m.r.
s singlet
d doublet
t triplet
q quartet
pent pentet
m multiplet
brd broad
J coupling constant (Hz)
Ar aryl
i.r.
s
m
w
strong
medium
weak
NOMENCLATURE
The nomenclature of cyclohexene and cyclohexane compounds referred to in
this thesis, is based on shikimic acid nomenclature, even though this may not
necessarily conform to IUPAC convention. This permits analysis of any compound
without reference to the nomenclature for that particular compound, and furthermore,
allows direct comparison of NMR data.
The numbering system employed labels the carboxylate substituted carbon as
C-l and proceeds anticlockwise around the ring, through the double bond. More
highly substituted derivatives are named as depicted below. All other compounds are
named in accordance with IUPAC rules.
c o 2r
OR
C 0 2R
CONTENTS
Page No.
CHAPTER ONE. INTRODUCTION 1
1.1 The Shikimate Pathway 1
1.1.1 Introduction 1
1.1.2 The Common Pathway 3
1.2 Syntheses of Shikimic Acid 16
1.2.1 Birch e ta l 16
1.2.2 Koizumi et a l 18
1.2.3 Koreedae/a/. 19
1.2.4 Koreeda et a l 19
1.2.5 Mirza e ta l 20
1.2.6 Singh, Wightman et al 21
1.2.7 Johnson ef al 23
1.3 Synthesis of Later Intermediates in the Shikimate Pathway 25
1.3.1 Shikimic Acid - 3 - Phosphate 25
1.3.2 5-Enolpyruvylshikimate-3-Phosphate (5-EPS-3-P)
27
1.3.3 Chorismic Acid 3 2
1.4 Inhibition of Shikimate Pathway Enzymes 36
1.4.1 Synthesis of Analogues of Shikimic Acid and
Shikimate -3- Phosphate 37
1.4.2 Synthesis of 5-EPS-3-P Synthase Inhibitors 42
1.4.3 Synthesis of Inhibitors of Chorismic Acid 50
CHAPTER TWO. RESULTS AND DISCUSSION 52
2.1 Aims and Objectives 52
2.2 Synthesis of 5-Bromoshikimate 52
2.2.1 Protection of Shikimic Acid 52
2.2.2 Bromination at C-5 54
2.3 Synthesis of Methyl 2-(tri-n-butylstannylmethyl)propanoate 61
2.3.1 Methyl 2-iodo-2-methyl-3-(toluene-/?-sulfonyl)
propanoate 62
2.3.2 Methyl 2-((toluene-/?-sulfonyl)methyl)propenoate 64
2.3.3 Methyl 2-(tri-n-butylstannylmethyl)propenoate 65
2.4 Methyl 3a,4a-isopropylidenedioxy-5p-[2-methoxycarbonyl-
prop-1 -en-3-yl]-cyclohex-1 -ene-1 -carboxylate 67
2.5 Thionocarbonates 75
2.5.1 Methyl 3a,4a-isopropylidenedioxy-5 p-phenyl-
thionoformate-cyclohex-1 -ene-1 -carboxylate 77
2.5.2 Methyl 3a,4a-isopropylidenedioxy-5p-/?-tolyl-
thionofonnate-cyclohex-1 -ene-1 -carboxylate
2.5.3 Methyl 3a,4a-isopropylidenedioxy-5P-trichloro-
phenylthiono-cyclohex-1 -ene-1 -carboxylate
2.5.4 Methyl 3a,4a-isopropylidenedioxy-5P-pentafluoro
phenol-cyclohex- 1 -ene- 1 -carboxylate
2.55 Methyl 3a,4a-isopropylidenedioxy-5p-S-methyl
dithiocarbonyl-cyclohex-1-ene-1-carboxylate
Synthesis of 5-p-Bromoshikimate
2.6.1 Epoxide F ormation - Mitsunobu Reaction
2.6.2 Methyl 3a,4a-isopropylidenedioxy-5P-methane
-sulfonyloxy-cyclohex-1 -ene- 1 -carboxylate
2.6.3 Methyl 3a,4a-dihydroxy-5P-methane sulfonyloxy-
cyclohex- 1 -ene-1 -carboxylate
2.6.4 Methyl cis- 3 -hydroxy-4,5 -oxy cy clohex-1 -ene-
carboxylate
2.6.5 Halohydrin Formation
2.6.6 Protection of Halohydrins
2.7 Coupling Reactions to Afford Methyl 3ot,4a-isopropylidene-
dioxy-5P-[2-methoxycarbonylprop-1 -en-3-yl] -cyclo-hex-1 -
ene-1-carboxylate and Methyl 3a,4a-isopropylidene
dioxy-5y-[2-methoxycarbonylprop-1 -en-3-yl] -cyclo-hex-1 -ene-1 -
carboxylate 95
2.8 Acetonide Deprotection 96
2.9 Formation of 7hm?-8a-Hydroxy-6-methoxycarbonyl
-3 -methylene-4a, 5,8,8a-tetrahydro-4H-benzo[e]pyran-2
-one 97
2.10 Coupling Reactions to Afford Trans- 8 a -Hydroxy-6 -m ethoxy -
carbonyl-3-methylene-4a,5,8,8a-tetrahydro-4H-benzo[e]pyran-2
-one 98
2.11 Further Epoxide Opening Reactions 99
2 .11.1 Attempted Synthesis of Tetrahedral Intermediate
Analogue 99
2.11.2 Fluorohydrin Formation 100
CHAPTER THREE. EXPERIMENTAL 102
REFERENCES 147
1
CHAPTER ONE
INTRODUCTION
1.1 The ShikimatePathway
1.1.1 Introduction
The glucose-derived shikimate pathway and the acetate-derived polyketide
pathway are major routes for the biosynthesis of aromatic compounds in plants, fungi
and micro-organisms.1 The former leads to the formation of the aromatic amino
acids, L-phenylalanine, L-tryptophan and L-tyrosine, and is named after a key
intermediate, shikimic acid 1.
HOv OHOH
1
This was first isolated from the fruit of Illicium religiosum in 1885 by
Eykmann.2 The name for this compound is derived from the Japanese name for this
plant, shikimi-no-ki. Work by Fischer and Dangschat^, Karrer^ and Freudenberg^,
proved the structure and absolute stereochemistry, but the true importance of shikimic
acid was not fully appreciated until work by Davis^ in the 1950's.
Davis showed that certain mutants of Escherichia coli and Aerobacter
aerogenes accumulated shikimic acid, while other mutants, blocked at a different
point in the pathway, were able to replace missing aromatic substrates by utilizing
2
c h 2o hHQ DAHP
synthase
OH® 0HO' OH
OHHOOHOHOH
(3) (4)
3 -Dehydroquinate synthase
NAD+COj'
Shikimatedehydrogenase
NADPH
n a .C 0 2_ 3 -Dehydroquinase ►
0 ' y "OH OH
(5)
COo'Shikimate
kinase
0 OH
OH
HO y OH OH
(1)
ATP
CO5-EPS-3-P Chorismatesynthase ^ synthase
PEP O C 0 2-
OH
(9)
Scheme 1.1 The Common Pathway
3
shikimic acid. These observations identified shikimic acid as a common precursor for
each of the aromatic compounds cited above together with /?-aminobenzoic acid and
/?-hydroxybenzoic acid. Further observations by Davis, Sprinson^> Gibson** and
subsequent workers revealed the common pathway to involve eight intermediates,
leading from glucose to shikimic acid and then to chorismic acid (Scheme 1.1).
1.1.2 The Common Pathway
The main part of the pathway from D-glucose to chorismate 9 is known as
the common pathway. The precise mechanism for each stage remains debatable
although the intermediates have all been identified.
Thus, oxidation of glucose by the pentose phosphate pathway affords D-
erythrose-4-phosphate 3, and by glycolysis affords phosphoenolpyruvate (PEP, 2).
The enzyme [7-phospho-2-keto-3-deoxy-D-araZ>/«o-D-erythrose-4-phosphate lyase
(pyruvate phosphorylating), E.C.4.2.1.15]lf catalyses the condensation of
phosphoenolpyruvate and D-erythrose-4-phosphate to give 3-deoxy-D-arabino-
heptulosonate-7-phosphate (DAHP) 4 and inorganic phosphate. This is the first
committed step in the shikimate pathway, the enzyme more conveniently being
referred to as DAHP synthase (scheme 1.2).
C 0 2'
^ O DAHP
synthase (p)oOH
OHOH
OH DAHP
PEP
(p ) = phosphate P 0 32"
Scheme 1.2
Originally the mechanism of the DAHP synthase reaction, proposed by
Sprinson et al.9, was thought to involve a concerted process in which nucleophilic
attack at the phosphorus atom of PEP results in a cleavage of the P-0 bond. This
cleavage generates a reactive enol pyruvate anion which rapidly adds to D-erythrose-
4-phosphate (scheme 1.3).
However, later kinetic studies^, pointed to a 'ping-pong' mechanism in
which one of the reaction products is released before both substrates can bind to the
o-p=oPEP
C 0 2‘
OH
OHH
CO 2"
OH
® 0 OHOH
DAHP
Scheme 1. 3 Original postulated mechanism for DAHP synthase
enzyme. Since PEP tends to stabilise the enzyme against denaturation^, it seemed
logical to postulate that an enzyme bound enolpyruvate intermediate is formed
concurrently as a release of inorganic phosphate.
Experiments'10,12 jn which the enol oxygen atom of PEP was labelled with
1^0 showed that it is the C-0 bond, and not the P-0 bond, that is broken. An
alternative mechanism was thus proposed in which the substrate PEP is first
transferred to a nucleophilic group on the enzyme, such as a carboxyl group (scheme
1.4). Elimination of a phosphate ion leaves an enolpyruvyl enzyme complex, which
undergoes acyl-oxygen cleavage and initiates an aldol condensation with D-erythrose-
4-phosphate.
The ring closure of DAHP to give dehydroquinate (DHQ, 5), the first of the
carbocyclic metabolites in the common pathway, is catalysed by the enzyme 7-
phospho-3-deoxy-Z)-ara£/«0-heptulosonate phosphate lyase, which is more
5
commonly known as 3-dehydroquinate synthase. The enzyme requires NAD+^ and
a divalent metal cation. Mechanistic studies use Co2+ as the cation whereas Zn2+ is
OH3 4
Scheme 1.4 Postulated 'Ping-Pong* mechanism for DAHP synthase
more likely in vivo. Mechanisms for the sequence of reactions which this enzyme
undergoes has been postulated by Sprinson^ (Scheme 1.5). The NAD+ to NADH
mediated oxidation at C-5 acidifies the C-6 proton which facilitates the phosphate
anion to P-eliminate. The enzyme-bound NADH then reduces the ketone to give the
enol pyranose 11 which, after ring opening, undergoes an intramolecular aldol
reaction to give 3-dehydroquinate 5.
This sequence of reactions, converting DAHP to 3-dehydroquinate, is
particularly complex for a single monomeric enzyme. The enzyme, presumably
having only a single active site, seems to act as a dehydrogenase, a phospholypase, a
pyranose-opening enzyme and as an internal aldolase^.
Knowles 14 showed that the enzyme was not directly responsible for the
ElcB elimination of phosphate after the initial oxidation of DAHP. He argued that as
6
long as the substrate is bound to the enzyme in a suitable conformation, then one of
the phosphoryl oxygens can abstract the C-6 proton (scheme 1.6). Inexorably,
elimination then follows.
B
OH
OHO
OH® 0 OH
NAD+ NADH
OHOH
r
OH
OH
HO, .CO2'
OHOH 5
Scheme 1.5
Bartlett has synthesised the enol pyranose intermediate (10)^ . Removal of
the o-nitrobenzyl ketal, by photolysis in neutral aqueous solution, gave complete
spontaneous conversion to 3-dehydroquinate. This, along with the work done by
Knowles, suggests that the enzyme is actually only a dehydrogenase.
7
OH OHOH
A P H a
OH OH0 O
t
-O . P H a
OHOH
Scheme 1.6
3-Dehydroquinase catalyses the dehydration of 3-dehydroquinate (5) to
dehydroshikimate (6) (scheme 1.7), and labelling experiments by Haslam^ show
that the loss of water proceeds in a stereospecific cis fashion. In order to account for
this it has been proposed^ that a histidine residue in the active site facilitates the syn
elimination process, possibly via an iminium salt. Certainly a lysine residue in the
active site is known to form a Schiffs base with the oxo group of the 3-
dehydroquinate.
Scheme 1.7
Shikimate dehydrogenase catalyses the reversible reduction of
dehydroshikimic acid 6, in the presence of NADPH, to give shikimic acid 1.
Shikimate kinase then catalyses the phosphate transfer from ATP to the hydroxyl
group at C-3 of shikimic acid to give shikimic acid-3-phosphate 7(scheme 1.8).
NADPH NADP
OH OH OH
6 1 7
Scheme 1.8
The enzyme that catalyses the biochemically remarkable reaction of PEP
and shikimate 3-phosphate is phosphoenolpyruvate:3-phosphoshikimate 5-0-(l-
carboxyvinyl)transferase, commonly known as 5-enolpyruvylshikimate-3-phosphate
synthase (5-EPS-3-P synthase). Initial studies on the enzyme were carried out by
9
Levin and Sprinson who proposed that it exerts the effect through an addition-
elimination mechanism^ (scheme 1.9).
© 0 C 0 2‘©o' OHOHOH
7 12
OH8
Scheme 1.9
Abeles et alA^ propose a mechanism in which an enzyme:PEP complex
analogous to that proposed for the transferase, is formed (scheme 1.10). This
mechanism was based upon analogies to the behaviour of the enzyme UDP-N-
acetylglucosamine enolpyruvyltransferase which catalyses the first step in the
biosynthesis of the cell wall peptidoglycan. These workers argued that the C-5
hydroxyl group of shikimate 3-phosphate does not initially form a complex with PEP,
but combines with an enzymically activated form of this intermediate. However
more recent kinetic studies and the isolation of the intermediate 12^0-24^ have lead to
a mechanism nearly resembling that outlined by Sprinson. Indeed, A n d e r s o n ^ has
isolated the tetrahedral intermediate 12. This is stable under basic conditions, but
under acidic conditions it decomposes to give PEP and shikimate 3-phosphate. It is
concluded that 12 is a true intermediate on the pathway and that the reaction does
proceed by an addition-elimination mechanism involving nucleophilic attack of the
C-5 hydroxyl group of shikimate 3-phosphate at C-2 of PEP. Although the
intermediate has been characterised, the absolute stereochemistry of the tetrahedral
10
centre has yet to be determined. NMR studies have been carried out on the
intermediate by labelling P E P with at C-2 or C-3 and using this substrate in
place of natural PEP.25 Evans^ has isolated another tetrahedral intermediate,
which is clearly not on the reaction pathway which gives 5 - E P S - 3 - P . 2 6 This seems
to be responsible for the novel shikimate ketal 13 which has been isolated by
Sammons^l.
©O'"
13
H— B Enzyme / :B—Enzyme
H
• + X© o ' : OH © O y C 0 2-OH ( © o ^ c ° 2-
EnzymeX—Enzyme
H -^B Enzyme Enzym e-B:.
co2H
© o' 'y /̂ co2- x x, 5:hOH X—Enzyme i 9^# C 0 2
Enzyme
X—Enzyme
S h u
Scheme 1.10
11
Chorismic synthase [0^-(l-carboxyvinyl)-3-phosphoshikimate phosphate
lyase] catalyses the conversion of 5-EPS-3-P 8 into chorismic acid 9; the final step in
the common pathway. It requires a reduced flavin cofactor, although the reaction
results in no net overall change in redox state. L a b e l l i n g ^ , 28 experiments have
shown that only the 6-pro-R hydrogen is lost and thus the overall transformation is a
trans-1,4-elimination. In cyclohexene systems, concerted 1,4-eliminations proceed
predominantly in a cis fashion, therefore mechanisms involving a 2 stage process
have been proposed. It is possible, however, that the enzyme causes the substrate to
adopt a suitable conformation such that a concerted trans 1,4-elimination is possible.
A two-stage mechanism, in which an 'X-group’ on the enzyme participates
has been proposed by Floss^, and might account for the overall /nms-elimination
(scheme 1.11).
COo’ r- * COo'Enzyme-X: ^ \ \ Enzyme-X,1 Pi
r Q x ^0 0 ) i O C 0 2-
OH8
Scheme 1.11
An interesting alternative proposed by Ganem^ involves a suprafacial 3,3-
rearrangement of 8 to the ally lie isomer /so-EPSP 14, followed by trans- 1,2-
elimination (scheme 1.12). However, /so-EPSP was synthesised by Bartlett^ and
was shown not to be converted to chorismate by chorismate synthase, thus suggesting
that wo-EPSP is not an intermediate in the reaction pathway.
12
-0 XoyOH OH8
>►
OH
14
Scheme 1.12
Another possible mechanism involves a carbocation where the phosphate
ester group is lost before the loss of the hydrogen at C-6 (scheme 1.13).
OH
J
8
OH
xC 0 2~
OH
O CO,
Scheme 1.13
Recently, Bartlett proposed a radical mechanism where abstraction of a
hydrogen atom from C-6 first occurs to give an allyl radical 15 (scheme 1.14).31
Heterolytic cleavage of the phosphate group gives the radical cation 16, which upon
single electron transfer affords chorismate. A radical mechanism provides an
13
explanation for the initial reduction of the enzyme and the requirement of a flavin
cofactor.
0 32-P0'' 1 " 0 ^ C 0 2- 0 32 P 0 ' i O ' 'C 0 2OH8
OH
16
i0 COc
OH15
OH
Scheme 1.14
Quinic acid 17, is widely found in the plant kingdom and is formed by an
off-shoot of the common pathway. Once formed, by the reduction of 3-
dehydroquinate 5 by NADPH, a reaction which is catalysed by quinate
dehydrogenase (scheme 1.15), it is not easily metabolised again. However some
micro-organisms are able to convert quinic acid into 3-dehydroquinate and thus
metabolise the former as an alternate carbon source.
HO, .C O ,' Quinate Hq, CO, ' ̂ dehydrogenase ' ~
0 OH NADPH HO OH
OH OH
5 17
Scheme 1.15
14
Chorismic acid is the branch point at which the common pathway diverges
to give the aromatic amino acids and diverse other compounds (Scheme 1.16).
Animation of chorismic acid leads through anthranilic acid to tryptophan 20. The
other two aromatic amino acids phenylalanine 21 and tyrosine 22, are formed via
rearrangement of chorismic acid to prephenic acid 19, in what is formally at least, a
Claisen rearrangement. This is a unique reaction in biosynthesis, and has been
proved to proceed through a chair-like transition state (scheme 1.17).32
Another route from chorismic acid leads via /7-aminobenzoic acid to the
folate group of coenzymes. The isoprenoid quinones which participate in electron
Scheme 1.17
C 0 2‘
o
transport and oxidative phosphorylation are also derived from chorismic acid.
/
15
C 02H
rc o 2h
0 . . A ™
IsoprenoidQuinones
NH2p-Aminobenzoic acid
OHChorismic acid 9
Folates NH2
Anthranilic acid 18
l̂ ^ c o 2h
N'IH
r yNH2
Tryptophan 20
OHPrephenic acid 19
OHPhenylpyruvic acid p-Hydroxyphenyl
pyruvic acid
m 2
^ c o 2h
NH
Phenylalanine 21 OH Tyrosine 22
Scheme 1.16
16
1.2 Synthesis of Shikimic acid
Much has already been published regarding the synthesis of shikimic acid
and its structural variants. Such compounds offer the prospect of selective and useful
biological activity. For example, the shikimate pathway only occurs in plants and
microorganisms. The three aromatic amino acids obtained from the biosynthetic
pathway cannot be produced by de novo synthesis in mammals, but have to be
obtained from the diet. Thus, the shikimate pathway is a particularly attractive target
for the design of specific enzyme inhibitors. Compounds fulfilling this function
would be selective herbicides or antibiotics.
Raphael et al,33 published the first total synthesis of shikimic acid in 1960.
Since then, many other different approaches to both racemic and optically active
forms of shikimic acid have been reported.34,35 jn this section the more recent
synthetic studies will be reviewed, covering 1988 to date.
1.2.1 Birch e ta l
Birch et al have prepared the optically active form of the key intermediate
26a, used in the synthesis of Campbell and S a i n s b u r y ,3 6 using iron tricarbonyl as a
lateral control group. (-)-Methyl shikimate was prepared from either of the resolved
iron tricarbonyl complexes 23 and 27 obtained from 1,4-dihydrobenzoic acid. These
complexes have previously been used in an enantiospecific synthesis of gabaculine.37
Starting form the (+)-complex 23 (scheme 1.18), the cationic salt 24 was
formed. This had previously been shown to react with nucleophiles solely at the 5-
exo p o s i t i o n . 3 8 Thus, reaction of 24 with aqueous sodium hydrogen carbonate
17
CO2M6(a)
CO2M6
73%(CO)3Fem
(b)
PF6"
(c) 98% ►
(CO)3Fe j
CO2M©
(CO)3Fe
24
Fe1.mi
OH
25
(d)
84%
OTBDMS
C 02Me
A ^k A 5 7 %
GO2M©
(d)
2 6 a ° T B D M S H ° i 0 HOH 26
82%
C 0 2MeA J! CO2M0
(CO)3Fe— — I 83%(CO)3Fe
^ X X)TBDMS
C 02Me(a)
C 02Me(b)
73%(CO)3Fe— f t - 95% (CO)3FePF6-
C 0 2Me
27 28 29
(a) Ph3C+ PF6", CH2CI2; (b) NaHC03l MeCN, H20; (c) TBDMSCI, (/-Pr)2NEt, DMF; (d) M^NO, PhH; (e) 0 s 0 4l Me2CO; (f) A7-Bu4NF, THF; (g) CrO^, Py, CH2CI2; (h) NaBH4l ZnCI2, Et20; (i) TBDMSOTf, (/-Pr)2NEt, DMF.
Scheme 1.18
afforded the alcohol complex 25. Protection as the TBDMS ether and
decomplexation, yielded the (+) enantiomer of the Bath intermediate 26a. This was
converted into (-)-methyl shikimate via c/Ahydroxylation and deprotection.
Starting from the (-)-complex 27, a similar procedure led to the alcohol
complex 29, which has the wrong configuration at C-5. Inversion was achieved by
Jones oxidation to the carbonyl compound, followed by a stereospecific reduction
under reagent approach control, using sodium borohydride and zinc chloride,
18
afforded the alcohol complex 30. Protection and decomplexation gave the required
diene 26a.
1.2.2 Koizumi et al
Koizumi et al have reported an enantioselective synthesis of methyl
shikimate (scheme 1.19)39. An asymmetric Diels-Alder reaction between menthyl
(S)-3-(2-pyridylsulfinyl)acrylate 31^^a and 3,4-dibenzyloxyfuran^9b 32 yielded a
mixture of exo and endo adducts, from which the major endo adduct 33 could be
separated. Reduction of 33 to the sulfide 34, followed by reduction of the ester gave
the alcohol 35. Treatment with Raney nickel resulted in desulfurisation and
hydrogenation of the double bond to give the endo-cis-dibenzyloxy derivative 36.
Oxidation and esterification yielded the methyl ester 37, which upon ring opening,
debenzylation and acetylation afforded (-)-methyl triacetylshikimate 38. / C 0 2Men n Q
C p , * O B" > b ^I C 0 2Mene - 'P y
' / \50%
O BnO OBn 31 32
Men = (-)-menthyl, Py = 2-pyridyl
BnO
33SOPy
(c) BnOBnO
COoMen OH OHBnOBnO OBnSPy SPy BnO
34 35 36
(e), (f) (9) - (i)
COoMeOBn AcO' OAcBnO
37OAc
38
(a) Et2AICI; (b) PBr3, DMF, 0°C; (c) LiAIH4, Et20; (d) Raney-Ni, EtOH; (e) C r03, Py, Me2CO; (f) CH2N2, MeOH, Et20; (g) LiN(TMS)2, THF, -78°C; (h) TMSCI, Nal, MeCN; (i) Py.
Scheme 1.19
19
1.2.3 Koreeda et al
The use of 3,4-dibenzyloxyfuran 32 as a precursor to shikimic acid was also
reported simultaneously by Koreeda et a l41 in a synthesis of racemic methyl
triacetylshikimate (scheme 1.20). The Diels-Alder reaction of 39 with methyl
acrylate, catalysed by zinc iodide, yielded the adduct 40 as a mixture of exo and endo
adducts (ratio 15:1). The endo adduct was subsequently hydrogenated to afford the
required endo-cis-dibenzy 1 oxy derivative 41. Ring opening, debenzylation and
subsequent purification of the resulting triol, as its triacetate, afforded methyl
triacetylshikimate 38 in 60% overall yield from 39.
ifCO2M6BnO
+
93%98% BnOBnO OBn4039
CO2M0(c)
_ _ 7 8 % I I 9 0 %
OBn C° 2Me BnO""'S^OH AcO
CO2M6
BnOOAc
41
(a) Znl2; (b) H2, P t0 2, EtOAc; (c) LiN(TMS)2l THF, -78°C; (d) BF3.OEt2, EtSH, CH2CI2, 0°C; (e) ACjO, Py.
Scheme 1.20
1.2.4 Koreeda et al
Koreeda has also recently published a total synthesis of racemic shikimic
acid from (l£,3.E)-4-acetoxy-l-dimethylphenylsilyl-1,3-butadiene 43.42 This is
essentially an improved version of his earlier synthesis^ and demonstrates the use of
the diene 43 as a surrogate for (l£,3£)-l,4-diacetoxy-l,3-butadiene (scheme 1.21).
20
The Diels-Alder reaction of 43 with 2-(trimethylsilyl)ethyl acrylate 44 yielded the
adduct 45 as the major product. c/s-Hydroxylation afforded the diol 46, which was
subjected to Fleming’s one-pot buffered oxidation procedure^ to yield the triol 47.
Base mediated elimination produced 2-(trimethylsilyl)ethyl shikimate 48, which was
deprotected to produce shikimic acid in an overall yield of 55% from 43.
OAcO
0(CH2)2TMS
SiMe2Ph 43 44
AcO
96%77%
AcO
HO'"81%
45
AcO O
94%OH
46 47
OH
e)
98%HO OH
OH48 1
(a) hydroquinone monomethyl ester (cat.), xylene, reflux; (b) 0 s0 4, NMO, THF, H20; ( c ) KBr, AcOOH, AcOH, AcONa; (d) DBU, THF; (e) n-Bu4NF, THF.
Scheme 1.21
1.2.5 Mirza et al
An intramolecular olefination was employed in the recent synthesis by
Mirza et al. (scheme 1.22). 45 Z)-Mannose was converted into the suitably protected
(a)
49 50
E t02C nr\ c* COoEt
60% nOH
OH
51 52 1
(a) (Et0)2P(0)CH2C02Et, A/-methyl morpholine, TiCI4, CCI4> THF; (b) H2, Pd-C, EtOH; (c) NaOEt, EtOH; (d) aq NaOH, EtOH; (e) Dowex 50W-X4 (H+, H20).
to afford 50. Hydrogenation gave the hemiacetals 51, which on treatment with base
underwent an intramolecular olefination to yield ethyl 3,4
-isopropylidene shikimate 52. Deprotection afforded (-)-shikimic acid in 27% overall
yield from D-mannose.
1.2.6 Singh, Wightman et aL
Singh, Wightman et al have recently published a synthesis of shikimic acid
starting from D-ribose (scheme 1.23).47 Compound 53 is formed from 2,3-0-
isopropylidene-D-ribose by either sequential silylation and oxidation, or from D -
ribonolactone.48 53 was treated with allylmagnesium chloride, at low temperatures,
Scheme 1.22
Z)-lyxose-5-aldehyde 49, 46 which was condensed with triethylphosphonoacetic acid
22
to yield the lactol 54 as an anomeric mixture. This was then reduced with DIBAL to
give a single diol 55. Desilylation of 55, followed by periodate cleavage, gave the
hemiacetals 56. Treatment with MeNHOH.HCl in pyridine, followed by heating of
the crude nitrone in toluene, led to a single isoxazoline 57, which was acetylated to
give 58. Hydrogenation of 58 over Pearlman’s catalyst, quartemisation, and Swem
oxidation gave aldehyde 59. Oxidation with NaC102-H202, deactylation and acid
hydrolysis gave (-)-shikimic acid 1.
TBDPSO^ 0 TBDPSO
OH80% 88%
53 54
OHOTBDPS
(c),(d)
OH
H 0 < ) (e),(f)
0 ^ 0
/ \
55 56
95%
(9)“ R = H 57 -► R = Ac 58
(k)-(m)
(a) allyl MgCl, THF, -78 °C, 3 hr. (b) DIBAL, PhMe, -78 °C, 3 hr. (c)TBAF, THF (d) NaI04, HjO, r.t. 2 hr. (e) MeNHOH.HCl, C5H5N, r.t. 20 hr. (f) PhMe, reflux, 18 hr. (g^CjO, DMAP, C5H5N. (h) Pd(OH2)/C, H2 (j atm), MeOH. (i) Mel, K2C 03, THF, r.t. 30 hr. 0) DMSO, (COCl)2, CHjClj, -78°C, 55 min, then ET3N, -78 °C to r.t. (k)NaC102, H20 2, NaH2P 0 4, MeCN, r.t. 1 hr. (1) K2C03,
MeOH-H20, r.t. (m) TFA-H20, r.t.Scheme 1.23
23
1.2.7 Johnson et al
Johnson et al.49 has recently synthesised (+) and (-)-methyl shikimate from
benzene (scheme 1.24). Benzene 60 was oxidised by mutants of the micro-organism
Pseudomonasputida to the diol 61^0 , this was then converted into /weso-diol 62 and
then was asymmetrised to mono-acetate 63 utilizing Pseudomonas cepacia lipase in
isopropenyl acetate. ̂ 1 The mono-acetate was then oxidised using PCC^2 to generateOH OH
OH (c)M
OH62 63
OH OAc
w0' \ 90%
64 6665OAcOAcOAc
/ \ 83%
OAc 67 OAc
OAcMeO
69%
° \ /0 / \ (i) 88%
68
M602Cx>v
I X89%
OH 26
(a) Pseudomonas putida. (b) ref 49b and 49c. (c) Pseudomonas cepacia lipase, isopropenyl acetate, (d) Pyridinium chlorochromate, CH2C12, molecular sieves, (e) ^-pyridine CC14. (f) 2-tributylstannylfuran, Pd(PhCN)2Cl2, Cul, Ph3As, iV-methylpyrrolidone (g) CeCl3, NaBH4, MeOH, -78°C. (h) H2, Pd on C, EtOH. (i) Ac^O, 4-dimethyl-
aminopyridine, Et3N, CH2C12. (j) 1- Ru02.H20, NaI04, CC14, H20 , CH3CN.2- CH2N2, E^O. 3- DBU, CH2C12, 20°C, 12 hr. (k) TsOH, MeOH, reflux.
Scheme 1.24
24
enone 64. Treatment with iodine in carbon tetrachloride-pyridine furnished the a-
iodoenone 65 in 80% yield. Furan 66 was isolated in quantitative yield when the a-
iodoenone 65 and 2-tributylstannylfuran were coupled under Stille c o n d i t i o n s . ^ The
enone 66 was reduced under Luche conditions^ to furnish a mixture of readily
separable epimeric allylic alcohols 67 (ratio 6:1). Hydrogenation afforded 68, whilst
acylation of the alcohol 68 produced the diacetate 69. Oxidation of the furan group
of 69 with ruthenium tetroxide,^^ followed by esterification of the crude acid with
diazomethane and elimination of the acetate furnished the a,p-unsaturated acid 70.
Deprotection of the three hydroxyl groups was accomplished by treatment of 70 with
toluene-/?-sulfonic acid in boiling methanol to afford (-)-methyl shikimate 26.
The unnatural (+)-methyl shikimate 77 was also prepared from 63 (scheme
1.25). The hydroxyl group of 63 was first protected as a TBDMS ether, elimination
of the acetate and subsequent PCC oxidation of the resulting alcohol afforded 71.
The a-iodoenone 72 was prepared by treating 71 with iodine in carbon tetrachloride-
pyridine. Furan 73 was prepared from 72 as before. Luche reduction of this
compound afforded a 1:1 mixture of the epimeric alcohols 74. Deprotection of the
ferf-butyldimethylsilyl group, diacetylation and hydrogenation afforded 75.
Oxidation, esterification, and elimination was carried out as for 69 (scheme 1.24) to
afford the a,p-unsaturated ester 76. Deprotection of the acetonide and the acetate in
acidic methanol yielded (+)-methyl shikimate 77.
25
63
OTBDMS71
OTBDMS73
OTBDMS72
(n)
(i). (h)85%
OAc
97%OAc
76OAc75
OTBDMS74
M e02C(k)
88%
.-''OH
(1) TBDMSC1, imidazole, DMF; (m)K2C 03, MeOH;(n) tetrabutylammonium fluoride, THF, 25°C, 24 hr
Scheme 1.25
1.3 Synthesis of Later Intermediates in the Shikimate Pathway
1.3.1 Shikimic acid 3-phosphate
The first synthesis of shikimic acid 3-phosphate was reported by Bartlett et
al.,56 (Scheme 1.27). Cyclohex-3-ene-l-carboxylic acid 78 underwent
iodolactonisation, followed by DBU induced elimination to give the lactone 79. This
was converted to the epoxide 80, which was opened with trimethylsilyl bromide, the
resulting trimethylsilyl bromohydrin was eliminated with DBU and after aqueous
workup gave the alcohol 81. Epoxidation gave the epoxy alcohol 82 which upon
26
methanolysis gave (±)-methyl shikimate 26. Methanolysis of 82 at a lower
temperature gave the epoxy diol 83. Protection and opening of the epoxide afforded
protected shikimate derivative 84 in which the 3-OH is free. Phosphorylation ^7
yielded the phosphate triester 85 which was deprotected with DBU. Hydrolysis and
cleavage of the acetal protecting groups, followed by ion exchange chromatography
yielded (± )-3-phosphoshikimic acid 7.
c o 2h (a),(b) (c) (d)— - \ — ^ r i \ —84% r i \ 81% \ 85%
U L -Y L -0
78 80 OH 81
COoMe
(e)
91%
C 0 2Me
mg)~98%
OH ho '
(h)
81%
OH OH OR R= EtOCH(Me)-82 83 84
C 02Me | 2
c o 2h | z
i ^ S(i)-(k)
--------►-89% ...
(R'0)2P(0)0 '' OR h 2o 3p o n' : OHOR OH85 7
R,=p-N02C6H4(CH2)2-
(a) l2l Kl, NaHC03, H20; (b) DBU, THF, reflux; (c) 3,5-dinitro- perbenzoic acid, CH2CI2; (d) TMSBr, Ph3P, MeCN then DBU, reflux; (e) K2C 0 3, MeOH; (f) ethyl vinyl ether, PPTS, THF; (g) K2C 0 3, MeOH; (h) bis(p-nitrophenylethyl) phosphoro chloriodate, Py, DMAP, CH2CI2; (i) DBU, CHCI3; Q) aq. NaOH; (k) Dowex 50W-X8 (H+), h^O.
Scheme 1.26
27
(±)-3-Phosphoshikimic acid 7 has also been synthesised by Tisnes et al.5%
(Scheme 1.27). Methyl shikimate 26 was protected as the acetonide 86. This was
converted in two steps by acylation and cleavage of the acetal protection to give the
3,4-diol 87. This was then reacted with dibutyltin oxide to give O-stannylene acetal
88. By reacting this with dimethoxytrityl chloride for less than one hour gave 89.
For longer periods the dimethoxytrityl group partially migrates from the 3 to the 4
position. After acetylation of the 4-hydroxyl group (90) the dimethoxytrityl group
was removed using aqueous acetic acid and tetrahydrofuran to give the diacetate 91.
This was phosphorylated to give 92 . After debenzylation with bromotrimethylsilane
and hydrolysis, (-)-shikimate 3-phosphate 7 was afforded as its sodium salt in an
overall yield of 32% from shikimic acid.
1.3.2 5-Enolpyruvylshikimate-3-phosphate (5-EPS-3-P)
The construction of the enolpyruvyl functionality of 5-EPS-3-P and
chorismic acid, was first demonstrated by Berchtold et a l ^ in a synthesis of 5-
enolpyruvylshikimate 98 (scheme 1.28). The carbonate derivative of (-)-methyl
shikimate 93 was reacted with dimethyloxomalonate to afford the hemiketal 94.
Treatment with thionyl chloride followed by reduction, yielded 95, which was
converted to the Mannich base 96. Quartemisation gave the quaternary ammonium
iodide, which upon heating underwent decarboxylation and elimination to afford 97.
Hydrolysis of 97 gave 5-enolpyruvylshikimic acid 98 or ‘compound Z \\^ 0
Compound Z \ has been observed as a secondary metabolite from hydrolytic cleavage
of the phosphate ester group of 5-EPS-3-P, but has no known biological function.
28
C02Me C02Me C02Me
R = H 86
► R = Ac 70
COoMe COoMe
(f)-(h)
OAc OAc
BuQ- S n 'O
Bu88
OR4R3 = dmT, R4 = H 89 R3 = dmT, R4 = Ac 90 R3 = H, R4 = Ac 91
OAcOAc
92
OHOH
7
(a) Amberlite resin, MeOH; (b) 2,2-dimethoxypropane,p-TSA;(c) DMAP, acetic anhydride, CH3CI; (d) AcOH-THF-H20 (39:11:6), 70°C, 6 h; (e) Bi^SnO, PhH, reflux; (f) dimethoxytrityl chloride, DMF; (g) DMAP, acetic anhydride, CH2CI2; (h) AcOH, H20; (i) tetrazole, dibenzyl A/,A/-diethylphosphoramidite, Ch^C^, then MCPBA, -40°C; G) TMSBr.
Scheme 1.27
(a) (Me02C)2C0, PhH, reflux; (b) SOCfe, Py, THF, 0°C; (c) Zn, 90% aq. AcOH, 0°C; (d) C H ^ N M e/ r, Et3N, CH2CI2; (e) Mel, CH2CI2, reflux; (f) DMSO, 80°C; (g) aq. NaOH; (h) Amberlite IR 120 (+), H,0.
Scheme 1.28
The first synthesis of 5-EPS-3-P was reported by Ganem et a l61 (scheme
1.29). The acetonide of (-)-methyl shikimate 86 was converted to the alkoxymalonate
99 by the Rh2(OAc)4 catalysed insertion of dimethyl diazomalonate. Reaction with
Eschenmoser’s reagent, quartemisation and decarboxylation/elimination, in a similar
sequence to that used by Berchtold^, afforded the enolpyruvate 100. Deprotection
30
afforded the diol 101, which was selectively hydrolysed to yield the monoacid 102.
Cyclisation of 102 gave the bicyclic lactone
COoM©
OH
99
(b), (c), (d) C 0 2Me _____
J \ 70%CO2M6
CO2M6C02Me
(e) (f)
or ' 90% o\ i C 0 2Me H0'' : o ' C 0 2Me> " u 100 5 h 101
C02M©C02M6
(fl) (h), (i)
II 4 9 ° / h o ' ^ " 0 50%"HO T "0 c o 2h 0 .
C0 2 M©1030
c o 2h
(R0)2P (0 )00
104 o
a), (k), (i) ^
70%H2O3PO0 i O ' 'C 0 2H
OH 8
(a) (Me02C)2CN2, Rh2(OAc)4l PhH, reflux; (b) CH2=NMe2+ I', Et3N, CH2CI2 (c) Mel, CH2CI2i (d) DMSO, 95°C; (e) 80% aq. AcOH, 70°C; (f) aq. NaOH (1.1 equiv.), THF; (g) DCC, DMAP, THF; (h) PCfe, Py, THF then p-N 02C6H4(CH2)20H; (i) l2, H20 , -78 to 0°C; Q) DBU, Py; (k) aq. NaOH;(I) Amberlite IR120 (+).
Scheme 1.29
31
C02Me C02M©
C 02Me
C 0 2M©
0 A 0 C 0 2Me
(b), (c)
78%
C 0 2Me
i —92%- \ = O C 0 2Me h o '- i
x V ° 100 OH' C 02Me C 0 2Me
(e)
U 72%O C 0 2Me
101 *
HO
(9). (h), (i)
103
(Bn0)2P (0 )0
105c o 2h o
xCO,HH20 3P 0 ''
(a) (Me02C)2CN2, Rh2(OAc)4, PhH, 85°C; (b) C H ^N M e^ X, Et3N, CH2CI2; (c) Mel, MeCN, reflux; (d) 65% aq. AcOH, THF, 7CPC;(e) K2C 0 3, MeCN;(f) LDA, [(Bn0)2P(0)]20 , THF, -78°C; (g) TMSBr, Py, CH2CI2,0°C;(h) aq. NaOH then ion-exchange resin.
Scheme 1.30
103. Phosphorylation of 103 via the bis(p-nitrophenylethyl)phosphite, gave the
phosphate 104. Deprotection afforded 5-EPS-3-P 8 as the sodium salt after ion-
exchange chromatography.
Bartlett et al. ^ published a similar synthesis (scheme 1.30), in which the
early steps are virtually identical. However, the lactone 103 was produced by direct
32
cyclisation of the diol 101 with potassium carbonate. Phosphorylation was achieved
using tetrabenzylpyrophosphate to afford the phosphate triester 105. Deprotection of
the benzyl esters with trimethylsilyl bromide followed by alkaline hydrolysis gave 5-
EPS-3-P 8.
1.3.3 Chorismic Acid
Berchtold et al.^9, 63 reported the first total synthesis of (± )-chorismic acid
in 1982. An improved synthesis was later published by the same group (scheme
1.31).64
Bis allylic bromination of 106 gave a mixture of dibromides, that were
debrominated to afford the diene 107. Epoxidation of 107 yielded 108, which was
isomerised to 109 on treatment with DBU. The enolpyruvyl side chain was
constructed using either Berchtold’s^>63 0r Ganem’s^l procedure to afford 110.
The epoxide was then opened with PhSe" to give 111, which was hydrolysed to the
diacid 112. Selenoxide elimination from 112, in the presence of 3,5-
dimethoxyaniline as a PhSeOH scavenger, afforded chorismic acid 9.
C02M© C02M©
(a), (b) / S (c)
CO2M© GO2M6
100%
CO2M© CO2M6
u 1000/ rO C 02Me 110
PhSe
a)
U 81 %*~ 0 C 0 2Me
OH 111
CO,H
65%
PhSeOH 9
(a) NBA, AIBN, CCI4, reflux; (b) Bu3SnH, AIBN, PhH, reflux; (c) MCPBA, CH2CI2; (d) DBU, CH2CI2; (e) (MeQ2C)2CN2, Rh2(OAc)4, PhH, 65°C; (f) C H ^N M e^r, Et3N, CH2Cl2;(g) Mel, CH2CI2; (h) DMSO, 80°C; (i) (PhSe)2, NaBH4, MeOH; (j) aq. NaOH, THF, 0°C; (k) H20 2, DMA, M^CO, -35°C to 20°C.
Scheme 1.31
A total synthesis of (± )-chorismic acid was also published in 1982 by
Ganem et a l ^ The bicyclic allylic alcohol 114 was first prepared from 1,4-
dihydrobenzoic acid 113 (scheme 1.32).66 Protection of the hydroxyl group as its
MEM ether, saponification and esterification yielded 115. The Rh2(OAc)4 catalysed
insertion of dimethyl diazomalonate afforded 116, which was cyclised to give the
bicyclic lactone 117. Alkylation with Potier’s salt followed by quartemisation
yielded 118. Hydrolysis, decarboxylation and P-elimination in aqueous sodium
hydroxide afforded chorismic acid 9.
34
The enantiospecific synthesis of chorismic acid has been accomplished byboth Berchtold
c o 2h
(a)
and
C 0 2H
Ganem.
(b)
62% u .
113
OH114
65%Br
C 09Me
(i)
75% OH
OMEM
115
Berchtold has described
(d), (e)
70% 37%
Br
C 02Me
A| I C 0 2MeG )
0 A^ 0 C 02MeOMEM
116
35%
COoMe
(k), (I)
37%
COoM©
O
C 02Me
vO
O +NMe3 -0 S 0 2F
C 02Me
117 118
(m)
OH
(a) Br2l CH2CI2; (b) aq. NaHC03; (c) NBS, (PhC02)2> CCI4, reflux; (d) NaOAc, HMPA; (e) 10 % aq. H2S 0 4l THF, reflux;(f) MEM-Et3N+Cr, MeCN, reflux; (g) aq. KOH, THF; (h) Mel, HMPA; (i) (Me02C)2CN2, Rh2(OAc)4, PhH,65°C; Q)P-TSA, PhH, H20; (k) CH2=NMe+CF3C 02-; (I) FS020Me, CDCI3; (m) aq. NaOH, THF.
Scheme 1.32
35
the synthesis of an enantiomerically pure intermediate for his earliest synthesis of
chorismic acid^9,63 f r o m q Ui n ic a c id .67 The key intermediate 109 used in his
second synthesis (scheme 1.31) was also prepared in chiral f o r m .68 An
enantioselective enzymatic hydrolysis of the w-butyrate ester 119, followed by
inversion of the configuration of the carbinol carbon of 120, afforded 109 (scheme
1.32). The enolpyruvyl side chain was attached in a different manner, via coupling
with methyl diazophosphonoacetate and reaction with formaldehyde to yield 110.
Transformation of 110 into chorismic acid was accomplished as described e a r l ie r .63
CO2M6 CO2M© CO2M©
(a)
CO2M©
32%O ' '(C H 2)2CH3 5 "
119 120
CO2M© CO2M©
(d) D/ft,/nM , (e), (f)P(0)(OMe)2 -------^1 42%
O C 0 2Me from 102 =,.■
(a) cholesterol esterase, H20 , pH 7.8, 0 to 5°C; (b)/-Pr02CN=NC02-/-Pr, Ph3P, AcOH, THF; (c) NaOMe, MeOH; (d) MeO^CCXN^PfOXOMek, Rh2(n-C7H15C 0 2)4, PhH, reflux; (e) LiN(TMSfe, THF, -78°C; (f) H2CO, -78°C
Scheme 1.33
Ganem et al have developed an alternative route to Berchtold’s epoxide
109.69 The reaction of (-)-methyl shikimate 26 with 2-acetoxyisobutyryl bromide^O
yielded toms-bromoacetate 121 (scheme 1.34). Transesterification with sodium
methoxide in methanol led to the epoxide 122. This epoxide, also known as methyl
3,4-anhydroshikimate, had previously been reported in the literature,71 although the
specific rotation was different from that observed by G a n e m .69 This discrepancy
was attributed to a Payne rearrangement to 109, previously undetected by the earlier
w o r k e r s .72 Prolonged exposure of 122 to sodium methoxide produced a 1:3 mixture
of 122:109. The conversion of bromoacetate 121 to the epoxide 109 was possible,
thus leading to a simple two step synthesis from (-)-methyl shikimate.
C 02Me
HO
C 02Me
(a)
76%OH Br
C 0 2Me
(b)
OH100%
OH26
OAc121
0 o ' OH
(c)
122
4 6 % \ C 0 2Me
109
(a) a-acetoxyisobutyryl bromide, MeCN, CPC; (b) NaOMe, MeOH, 0°C, 30 min; (c) NaOMe, MeOH, CfC, 30 min, then 50°C, 35 min.
Scheme 1.34
1.4 Inhibition of Shikimate Pathway Enzymes
The shikimate pathway only occurs in plants and micro-organisms. The
three aromatic amino acids produced by the pathway cannot be produced by de novo
synthesis in animals, and have to be obtained from the diet. This makes the shikimate
pathway a good target for enzyme inhibition, and any compounds fulfilling this
function would be potential herbicides or antibiotics of low environmental impact.
37
Inhibitors are divided into two main classes, reversible and ir r e v e r s ib le . 73
Reversible inhibitors undergo rapid equilibrium binding with the enzyme and are
further classified as competitive, uncompetitive or non-competitive, depending on
whether they bind to the free enzyme, enzyme-substrate complex or both,
respectively. Irreversible inhibitors react covalently with an enzyme preventing
substrate binding or catalysis.
5-Enolpyruvylshikimate-3-phosphate synthase, which catalyses the
conversion of shikimate 3-phosphate to 5-enolpyruvylshikimate-3-phosphate, is the
most important enzyme in the shikimate pathway as an inhibitor target.
Glyphosphate 122 (TV- [phosphonomethyl]glycine), 74 the active ingredient of the
broad spectrum herbicide Roundup®, effectively inhibits this enzyme.
O HHO 11 1HU/ P \ / N C02H HO
122
1.4.1 Synthesis of Analogues of Shikimic Acid and Shikimate -3-Phosphate
Singh, Wightman et al. have described a synthesis of (-)-5-e/?/-shikimic acid
(scheme 1.35)47, which follows a similar route to their synthesis of (-)-shikimic acid
(scheme 1.23). 2,3-<9-Isopropylidene-Z)-ribose 123 was converted into the D-allo-
triol 124 by treatment with diallyl z i n c .75 Periodate cleavage of 124 gave 125 in
quantitative yield, and on treatment with MeNHOH.HCl in pyridine, afforded nitrone
126. Thermolysis of 126 yielded the cycloadduct 127, which was acylated to afford
128. Hydrogenation over Pearlman’s catalyst gave the aminoalcohol 129, and this
could be converted to the quaternary salt 130 by treatment with MeI-K2CC>3 in THF.
When 130 underwent Swem oxidiation, p-elimination occurred spontaneously to
38
HO\
" O '\ *o oX
123
OH (a)
OH
OH
124
(b)
100%
- t
0 O 98%
(d)
67%
125
° tM e N . 1
(f)
" O R 1 0 0 %
c h 2o h + c h 2o h
msnc a ( .)
/QAcoX 87%
OAc 0
(e )R = H 127 129 130
-► R = Ac 128 R
(h)
79%O
c o 2rc o 2h
(k)
OAc(R = H)
0H HO'' OH
(i)67%
— R = CHO 131
R = C 02H 132(I)
R = H 133
R = Me 134
(a) diallylzinc, EtjO, 0°C. (b) NaIO+ H20, r.t. 2 hr. (c) MeNHOH.HCl, C5H5N, r.t. 17 hr. (d) PhMe, reflux, 17 hr. (e)A.c20, DMAP, C5H5N. (f) Pd(OI 12)/C,
% MeOH. (g) Mel, KjCOj, THF, r.t. 30 hr. (h) DMSO, (C0C1)2, CH2C12, -78°C, 50 min, then ET3N, -78 °C to r.t. (i)NaC102, Hj02, NaH2P04,
MeCN, r.t. 1 hr. (j) KjCOj , MeOH-HjO, r.t. (k) TFA-HjO, r.t. 10 hr.(1) CHjNj , EtjO
Schemel.35
39
afford enal 131. This was readily oxidised to acid 132 using NaC102 and H2O2
under buffered conditions.^ Deacetylation to give 133, followed by acidic
hydrolysis gave (-)-5-e/?/-shikimic acid 135.
Ganem has synthesised both (-)-3 -homoshikimic acid and (-)-3-
homoshikimate-3-phosphate^ (Scheme 1.36). 3-Dehydroshikimic acid which can
be produced from shikimic acid (1) by either fermentation or by oxidation^, was
esterified to afford ester 136. After silyl protection of the diol, TBDMSC1 imidazole
to yield 137, methylenation afforded the diene 138. Deprotection using
tetrabutylammonium fluoride afforded enediol 139. m-Chloroperoxybenzoic acid
epoxidation selectively afforded 140, which was reduced using sodium
cyanoborohydride to give methyl 3-homoshikimatel41.79 This was hydrolysed to
give 3-homoshikimic acid 142 which was phosphorylated using
dimethylchlorophosphate to give triester 143. Deprotection, hydrolysis and anion
exchange chromatography gave 3-homoshikimate-3-phosphate 144.
Campbell, Sainsbury et al. have published a synthesis of (i)-homoshikimic
acid (scheme 1.37)80 in which the 1,2-dihydropyridine 145 was reacted with methyl
acrylate to yield 2-azabicyclo[2.2.2]oct-5-ene 146. 146 was then ring opened with
lithium hexamethyldisilazide to produce the diene 147. Deprotection of the BOC
protection group with TFA gave the amino ester, which was then converted into the
disulphonimide. This was then treated with osmium tetroxide to afford the diol,
which was protected as the acetonide to afford 148. Treatment of 148 with potassium
iodide and 18-crown-6 afforded the iodide 149. This was then converted into the
acetate 150, deacetylation of which gave the acetonide 153. Removal of the
acetonide 152, and hydrolysis of the ester gave (-)-5-homo shikimic acid 154.
Disulphonimide 148 was also converted into the O-formyl derivative 151, which was
deprotected to give 152.
40
c o 2h
HO' OH 0
CO2CH3 CO2CH3
A ,d>OTBDMS
OH1
OH136
OTBDMS137
COoCH COoCH COoCH
OTBDMS OH OHOTBDMS
138OH
139c o 2r
h o h 2c
R = CH3 141
OH (RO)2P—O-
0
C 0 2R
OH
0)
(g)
M/.W I R=CH3 143142 ” ' 7 L” ^R = H 144
(a) oxidation or fermentation, (b) CH2N2, Me0H-(C2H5)20 , -20°C.(c) TBDMSC1, imidazole, DMF, rt, 6h. (d)Ph3CH2, THF, reflux (e) tetrabutylammonium fluoride, THF, 0°C, 3h. (f) MCPBA, N^HPO^ CH2C12, reflux, 19 h (g) NaBH3CN, BF3-etherate, 5°C, 30 min.(h) saponification (i) (CH30)2.P0.C1, pyr,0°C, lh. (j) TMSBr, CH2C12, 0°C, lh. (k) NaOH, F^O, 0°C, 4h - anion exchange chromatography
Scheme 1.36
41
COoMe Isj^BOC(b)
CO2M6
CO2M©NHBOC
148
146CO2M6
147
(i)
OAcO
O150
COoMe
OCHO OHHO
CO2M6
O
- v151
OH
(o) 152
COoH
OHHO
OH154
(a) PhMe, reflux; (b) (TMS^NLi, THF, -78°C; (c) TFA; (d) NsCI, Et3N, THF;(e) NaH, NsCI, DMF; (f) 0 s 0 4, NMO;(g) Me2C(OMe)2, Me2CO, p-TSA;(h) Kl, 18-crown-6, PhMe,reflux, 7 days; (i) NaOAc, DMF,110°C, 2.5 h;(j) Kl, DMF, 130^0, 21 h; (k) aq. NH3, MeOH, 48 h;(I) Amberlyst-15, MeOH, 20°C, 17 h; (m) 50% aq. AcOH, THF, 60Pc,3.5 h; (n) 50% aq. AcOH, THF, 6(fC, 17 h; (o) NaOH, H2O, 20°C, 5.5 h.
Scheme 1.37
42
1.4.2 Synthesis of 5-EPS-3-P Synthase Inhibitors
Bartlett et al have synthesised a number of a n a l o g u e s * * 1 >**2 0f the unstable
tetrahedral intermediate 12, that is involved in the 5-EPS-3-P reaction. Stable
analogues of this high energy intermediate would be expected to benefit from the
extra binding affinity that these species (and transition state structures)
experience.83,84
In order to try to stabilise the ketal phosphate structure of the intermediate
12, the first group of analogues replaced the phosphate with a phosphonate.
Phosphonates have been shown to bind more tightly than homophosphonates, when
used as replacements for phosphates. **̂
c o 2h
\ y O ®
® o " 7 " V ^ c o 2h o h
12
The diastereomeric phosphonates were synthesised from the acetonide of (-
)-methyl shikimate 86 (scheme 1.38). The Rh2(OAc)4 catalysed coupling of 86 with
methyl (dibenzylphosphono) diacetate, followed by methylation, afforded the
phosphonates 155. Deprotection and cyclisation gave the lactones 156, which were
phosphorylated prior to separation 157, 159. Deprotection of both diastereomers
yielded the phosphonate analogues 158 and 160, which were purified as their sodium
salts. Both phosphonates 158 and 160 were shown to be competitive inhibitors of 5-
EPS-3-P synthase, with respect to 5-EPS-3-P, with binding constants Ki of 0.015 pM
and 1.1 pM respectively. Compound 158 is the most potent inhibitor of 5-EPS-3-P
synthase yet reported, binding more than a magnitude greater than the commercial
herbicide glyphosphate. Since compound binds 158 much tighter than 160, it was
43
suggested that this infers that the side chain of the natural intermediate 12 also has the
same absolute configuration.
COoMe CO2M© COoMs(c). (d)
3 <P 0 3Bn63%
0 : OH o ' : O' C 0 2Me HO
86
(0 . ( 0)
81%(Bn0)2P (0 )0 ' ' 9 H20 3P 0 ''
"P 0 3Bn2
25%
COoMe
P 0 3Bn2
O 156
c o 2h
V , P°3H2
Vo c o 2h
c o 2m ©
(f). (9 ) ►
45%0 h 2o 3p o '‘
O P 0 3Bn2
OH158
c o 2h
(e]_
46% \
(Bn0)2P (0 )0 '
0159
(a) (Bn0)2P(0)C(N2)C02Me, Rh^OAc)^ PhH, reflux; (b) KH, Mel, THF;(c) p-TSA, aq. MeCN; (d) p-TSA, PhH, reflux; (e) LDA, [(BnO)2P]0, THF -78 to 10°C; (f) TMSBr; (g) aq. NaOH.
Scheme 1.38
P 0 3H2
The second series of analogues involved the introduction of electron-
withdrawing groups onto the methyl group of 12, in order to destabilise the
oxacarbonium ion that is presumably involved in the decomposition process. The
trifluoropyruvate phosphate analogues were synthesised from the acetonide of (-)-
methyl shikimate 86 (scheme 1.39). Reaction of 86 with methyl trifluoropyruvate
44
gave the hemiketal, which was phosphorylated to afford the diastereomeric
phosphates 161. Formation of the lactone 162, further phosphorylation and
deprotection, as before, yielded the trifluoromethyl analogues 163 and 164. Both 163
and 164 were competitive inhibitors of 5-EPS-3-P synthase, with respect with to 5-
EPS-3-P, with binding constants of Ki of 0.026 pM and 0.032 pM respectively. Due
to these binding affinities being almost identical, doubt is cast over the earlier
suggestion (see above) that the absolute configuration of the tetrahedral intermediate
12 can be determined from the differing affinities of the phosphonate analogues.
C 0 2Me C 02Me(a) - (c) JL (d), (e)
OH O
C 0 2H
c f 3J ^ o p o 3r2
COoMe
HO
162R = p-N02C6H4(CH2)2-
c o 2h
^ ^ 0 P 0 3H2 +
h 2o 3p o v T ^o c o 2h h 2o 3po°* i o c o 2hOH OH163 164
(a) CF3C (0)C 02Met PCI3; (b) p-N 02C6H4(CH2)20H; (c) m-CPBA;(d) H30 +; (e) K2C 0 3; (f) [N0 2C6H4(CH2)20 ]2PNi(Pr)2; (g) m-CPBA;(h) DBU, BSA; (i) aq. NaOH.
Scheme 1.39
To probe the enzyme binding site of 5-EPS-3-P synthase, Anderson,
Knowles et al.%6 have synthesised two inhibitors. The 5-deoxy derivative of
shikimic acid-3-phosphate 168 was developed via Berchtold’s e p o x i d e ^ 120
(scheme 1.40). The epoxide was opened with dilithiumtetrabromonickelate to give
45
the bromoshikimate 165, and was protected to give the acetonide. Tributyl tin
hydride reduction 166, followed by deprotection yielded the diol 167. Hydrolysis and
phosphorylation gave 168, a modest inhibitor of 5-EPS-3-P synthase (Kl = 51 pM).
HO
CO2M6 C02Me CO2M6
166
C02Me
HO h 2o 3p o n'OH167
c o 2h
(a) Li2NiBr4, THF; (b) CH2=C(OMe)Me, p-TsOH; (c) Bu3SnH, AIBN, benzene; (d) Dowex50W-X8 (H+), MeOH; (e) aq. KOH, THF; (f) ATP, shikimate kinase.
Scheme 1.40
The 5-amino derivative 171 was also synthesised from (-)-methyl shikimate
26 via Berchtold’s epoxide 120 (scheme 1.41). This time the epoxide was opened
with sodium azide 169, and after being reduced afforded the 5-aminoshikimate 170.
Hydrolysis and phosphorylation as before gave 171, which was a similar inhibitor (Ki
= 22 pM).
Campbell, Sainsbury et al have recently synthesised the 5-methylene
analogue of 5-enolpyruvyl shikimate 176 (scheme 1.42). 87 Starting from 149 (see
scheme 1.37 for synthesis)^®, this was coupled with the anion of methyl 3-
nitropropanoate^S to afford the nitro compound 172. The reaction was carried
46
CO2 M6
HO
CO2 M©CO2M6
(a), (b)
(e) ►
COoMs
HO%o' NH
OH OH170 171
(a) Ph3P, DEAD, THF; (b) 120°C, 0.5 mmHg; (c) NaN3> NH4CI, MeOH, H20; (d) H2, Lindlarcat., EtOH; (e) aq. KOH, THF; (f) ATP, shikimate kinase.
Scheme 1.41
out in a 2:1 mixture of THF-DMPU in order to stabilise the dianion. Although the
reaction was low yielding, the bulk of the recovered material was starting material
149
Nitro compound 172 was then treated with DBU which effected a clean
elimination of nitrous acid, to yield the dialkene 173. Deprotection of the acetonide
group with aqueous acetic acid, afforded the diol 174, and a small amount of the
bicyclic lactone 175. Diol 174 was then saponified to afford the diacid 176, which is
the carba analogue of 5-enolpyruvylshikimic acid 98.
Another route to the protected carba analogue of 5-enolpyruvylshikimic
acid 173, has been published by Campbell, Sainsbury et al. ̂ This synthesis used the
acetonide of (-)-methyl shikimate 86, or methyl 3a,4a-isopropylidenedioxy-5a-
hydroxycyclohex-l-ene-l-carboxylate 134 as the starting material. Conversion of 86
47
COoMe
NO20% 86%
172149
COoMe
HO
HOOH
173
(d)
174 47%
86%
COoH
HOOH
175 15%
176
(a) N02 (CH2)2C0 2MeI 2 equiv. LDA, THF,DMPU, -78 to 0°C,13 h; (b) DBU, THF, 20°C, 4h; (c) 50% aq. AcOH, THF, 60°C, 36 h;
(d) NaOH, H20.
Scheme 1.42
48
25%OH
CO2 M©
CO2M©
SnBu3
17865%
COoM©
C 02Me 0\ — 6
179173
66%
C 0 2Me
CO2M6 CO2M6
(a)
36%O ± OH O ,= Br
" A 0 ^ \ °134 180
(a) CBr4, PPh3l THF, reflux; (b) AIBN, PhMe, reflux
Scheme 1.43
and 134 to their respective bromides 177 and 180 was accomplished by treating them
with triphenylphosphine, carbon tetrabromide in THF.89 The bromides 177 and 180
were then reacted with allylstannane 17890,9 1 10 affor(j 173 and 179.
Sikorski et al. have reported the synthesis of a 5-EPS-3-P synthase inhibitor
based on its ternary complex with shikimate-3-
49
HO
C02Me C02Me C02Me
(a), (b)
52%
'O
120
G 02Me
C 0 2Et
. a
(f)
57%
V
183
N C 0 2Et
LP(OBn)2iiO
c o 2c h 3(g)-(i)
O 33% llP(OBn)2
184
PONHI
0 3P OH
185
(a) N aN 3, NH4CI, H20 -M e 0 H , reflux; (b) 2 ,2-d im ethoxypropane, p-TSA; (c) H2i MeOH, 5 % Pd/C ; (d) BrCH2C 0 2Et, E t3N, THF; (e) (BnO)2PO - CH 2OTf, CH2CI2, sa t. N a H C 0 3, reflux; (f) Dowex (H+), H20 -C H 3CN, reflux; (g) (B n0)2P 0 2 P 0 (0 B n )2, (M e3Si)2NNa, THF, -78°C ; (h) TMSBr, (i) aq . NaOH, io n -ex ch an g e ch rom atography
Scheme 1.44
phosphate and glyphosate 122 (scheme 1.44).92 Epoxide 120 was opened with
sodium azide,93 and protected as the acetonide to give 181. Hydrogenation using
Lindlar’s catalyst afforded the protected diol amine, which was alkylated with ethyl
bromoacetate to give 182. Alkylation of 182 with dibenzylphosphonomethyltriflate
yielded 183, which has the protected glyphosate functionality. Deprotection with
Dowex resin yielded bicyclic lactone 184. Phosphorylation of 184 with
50
tetrabenzylpyrophosphate, removal of the protecting groups with TMSBr, aqueous
base and ion-exchange resin afforded 185.
1.4.3 Synthesis of Inhibitors of Chorismic Acid
Ganem et a l have synthesised phosphonate analogues of chorismic acid 192
and 193 (scheme 1.45)94 Epoxide 102 was reacted
CO2MS
PO(OCH3)2 (a)
OH102
N = (PO(OCH3)2
186
48%PO(OCH3)2
O PO(OCH3)2187
78%
188
C 0 2Me
x (C)
90%
(d)
XO PO(OH)OCH3
OH189
PhSe PO(ONa)OROH OH
PO(OH)OH
(e)90%
R = CH3 190
Na 191
192
190(f)
OH193
(a) Rh2(OAc)4l PhH, reflux; (b) LHMDS, THF, -20°C, CH2=0; (c) (PhSe)2, CH3OH; (d) aq. NaOH; (e) TMSBr, py, CH2CI2, aq. NaOH; (f) 30% H20 2, CH3OH, 5°C, 3,5-dimethoxyaniline, 2CPC.
Scheme 1.45
51
with tetramethyl methylenediphosphonate 186 to yield ether 187. Homer-Emmons
olefination of 187 using LiN(TMS)2/ formaldehyde / THF furnished
monophosphonate 188. Opening of the epoxide of 188 with phenylselenide afforded
189. Saponification of 189 yielded 190. Treatment of 190 with TMSBr, aqueous
base workup yielded trisalt 191. Oxidation of 191 with hydrogen peroxide, and in
situ selenoxide elimination with 3,5-dimethoxyaniline afforded 192.
Phosphonate 193 was also synthesised from 190, by a similar route.
Saponification of 190 followed by oxidative elimination of the phenylselenide group,
as before, afforded phosphonate 193.
52
CHAPTER TWO
RESULTS AND DISCUSSION
2.1 Aims and Objectives
The primary objective of this project was to synthesise carba analogues of 5-
EPS and chorismic acid, replacing the oxygen at the 3’ position of the natural
substrates 8 and 9 with a methylene group.
The synthesis of the carba analogue of 5-enolpyruvylshikimate has been
demonstrated within the Bath laboratory via two separate routes (section 1.4.2,
schemes 1.42 and 1.43). 87 Starting from (-)-shikimic acid 1 it was envisaged that
the second route (scheme 2.1) would lead to 5-homoshikimate 173 and from there to
bicyclic lactone 175. This could hopefully then be manipulated to give 5-
homochorismic acid 194.
2.2 Synthesis of 5-a-Bromoshikimate
It was decided that we would synthesise the secondary alkyl bromide 177 in
the same way that has already been reported from within the Bath group (section
1.4.2 scheme 1.43). 87
2.2.1 Protection of Shikimic Acid
(-)-Shikimic acid 1 was protected as the methyl ester 26 by bubbling HCl(g)
into a solution of shikimic acid in methanol until the solution was saturated. 95 The
product was formed in good yields, upto 95%. The 3,4-cis- diol was then protected
by conversion to an acetonide 86, by treatment with 2,2-dimethoxypropane and
53
C 02Mei
xC 0 2Me f C 0 2Me
SnBu3178
0 OH O Br
J \ ° ^ \ °' 86 ' 177
COoMei
O i
173
U\
HO
175 O
COoHi
' U v li COoHOH
194
Scheme 2.1
acetone. Although the yields in the reaction were in the order of 82%, when 2,2-
dimethoxy propane was used in a 5-10 fold excess, without any acetone being
present, the reaction was complete after only fifteen minutes and the yield was 98%
(scheme 2.2).58 Analysis by *H n.m.r. shows the presence of two singlets at 5=
1.41 p.p.m. and at 8= 1.45 p.p.m., peaks which correspond to the resonances of the
gem dimethyl unit of the acetal.
54
c o 2h C 02Me C02Me
(a)I -------^ I ^
^ I 95% _ I (c) 98% .HO OH HO
OH
1
OHOH
26 V
OH
86
(a) HCI(g) MeOH; (b) 2,2-dimethoxypropane, Me2C=0, p-TSA, 4 h; (c) 2,2-dimethoxypropane (5 equiv.), p-TSA, 15 min.
Scheme 2.2
2.2.2 Bromination at C-5
It was hoped to achieve formation of the secondary alkyl bromide 177 by
treatment of 86 with triphenylphosphine and a tetrahalomethane. Such reactions are
known to proceed both with high conversion and in high y i e l d s ,96 plus with
extensive inversion of configuration. 97
A mild and rapid procedure for the preparation of alkyl bromides from
alcohols, as reported by Hooz and G i l a n i 8 9 , 9 8 as usecj in our laboratory
previously, was employed to obtain the 5a - bromo compound (177) (scheme 2.3).
C 0 2M©I
(a)
C 02MeI
O OH O ,
^ \ 086 ' 177
(a) CBr4, Ph3P, THF, reflux
Br
8%
C 0 2Mei
195
Scheme 2.3
55
Reagents of the type R3PX2 (where R=Ph or n-Bu and X=C1 or Br) have been
demonstrated to permit the conversion of alcohols to alkyl halides without the
complication of elimination or rearrangement.^ The exclusion of elimination
reactions was particularly important because the loss of HBr from 177 is facile.34, 89
The driving force for this is the thermodynamic stability of the corresponding diene
195. The mechanism of the elimination is undetermined, since a trans - diaxial
arrangement for the loss of HBr is not possible.
It has been demonstrated that the interaction of triphenylphosphine with
carbon tetrahalides results in the formation of triphenyl phosphine dihalide 196 and
an ylid 197.100 An ionic mechanism to account for this is shown as Scheme 2.4.
The intermediate 198 can be trapped by alcohols to form 199 or 200, which then
collapse to give triphenylphosphine oxide 202 and an alkyl halide 201.
Two possible ways by which the salt 200 may decompose have been outlined
by Franzus et al. 101
2Ph3P + CX4 Ph3P=CX2 + Ph3PX2 X=CI,Br197 196
+ + h 3P: X“ CX3 ► Ph3PXCX3 ► Ph3PCX3 X
198X +
h 3P:------X -^C ^P P h3X_------ ► Ph3P=CX2 + Ph3PX2X 197 196
+ + +P h 3PXCX3 + R' OH ------- ► Ph3PXOR' ► Ph3POR'X
198 199 200
+Ph3POR'X ------- ► R'X + PH3P=0
200 201 202
Scheme 2.4
+ c h x 3
56
(i) A first-order decomposition of a cluster of intimate ion pairs, which is
stabilised by the interaction of a positively charged phosphorus atom with an adjacent
negatively charged bromide ion (scheme 2.5).
Phv .xPh C(CH3)3
P h ' + '^ r ? ' l 'Q **- U H
Br Ph3P = 0
(H3C)3C ^ / Br
+ I ' DH
Scheme 2.5
(ii) A c2s + o2a thermal pericyclic reaction, where the P-Br bond is broken
suprafacially and the C-Br bond is made antarafacially.
All the kinetic, energetic, stereochemical and isotopic data are consistent with
the ion-pair mechanism (i).
Acetonide 86 was reacted with carbon tetrabromide and triphenylphosphine in
refluxing THF for five hours (scheme 2.3). This reaction was also attempted with dry
THF as the solvent with very little success, just resulting in mainly starting material,
some of the by-product triphenylphosphine oxide 201, and a small amount (8%) of
the required 5a-bromo compound 177. The latter was obtained as an oil, which
crystallized on standing to give colourless needles. A second product was also
isolated from the reaction mixture. This had a lower R f (0.23) than the desired
product (Rf 0.61) (petrol-ethyl acetate 4:1), but was only obtained in a very low yield
(2%).
Analysis by *H n.m.r. showed it to be the diene 195 (scheme 2.3) (previously
synthesised by Bowles^^ which forms by the elimination of HBr from 177. This
has characteristic peaks at 5= 6.04 p.p.m. and at 5= 6.54 p.p.m. corresponding to the
resonances of the allylic protons at C-5 and C-6, respectively. Analysis by ^H n.m.r.
of 5a -bromo 177 showed that the chemical shift of the 6(3 proton had moved from
57
5= 2.25 p.p.m. in compound 86 to 5= 2.97 p.p.m. This is due to the presence of the
5a-bromine atom (table 2.6).
Proton
Resonance
Chemical Shift (5)
C 0 2Me
A.86
C 0 2Me
A°V i BrA °
177
6p-H 2.25 2.97
6a-H 2.80 2.83
5-H 3.91 4.18
2-H 6.92 6.76
Table 2.6
but this was unsuccessful. We considered that perhaps either a very small amount of
water, or exceptionally dry conditions, might help the reaction but neither did.
Thinking that the steric bulk of the intermediate 204 (figure 2.7) might hinder the
reaction, we replaced triphenylphosphine with tributylphosphine. In addition, the
latter reagent is more nucleophilic and so the intermediate would localise the positive
charge on phosphorus facilitating the nucleophilic attack of Br -.102 Qur expectation
was partly fulfilled and the yield was now increased to 15%, but this was still not as
good as that quoted.87,103
58
ICO2M0
I ‘OO2M©
V204 205
Figure 2.7
Another reaction, in which the secondary hydroxyl group of 86 could be
replaced by a bromine atom, was sought. One method investigated involved the in
mixture of the alcohol 86, triphenyl phosphine and THF. We added bromine
dropwise until two drops gave a slight orange tint to the solution. However, after
stirring the reaction mixture we had no evidence (by tic) that anything had happened.
The solution was then warmed resulting in an orange solution but again no product
formed and starting material was recovered.
This reaction was repeated using pre-formed dibromotriphenylphosphorane.
This too failed to react with 86 and so another similar reaction was tried. This time
this required the use of N-bromosuccinimide (NBS) and triphenylphosphine.^^ A
solution of NBS in THF was treated dropwise with a solution of triphenylphosphine
in THF. Acetonide 86 in dry distilled THF was then added and the reaction was
stirred for four hours. Since no reaction had occurred the reaction was heated to
reflux for a further 5 hours, but again only starting material was recovered.
This called for more drastic conditions and we used PBr3 as the brominating
a g e n t . 105 Consequently a solution of 86 in DCM was treated dropwise with PBr3
over fifteen minutes. The reaction was then stirred at room temperature overnight.
Despite this no reaction occurred and so the reaction was heated to reflux for seven
hours. At the end of this no reaction has occurred.
situ formation of dibromotriphenylphosphorane^^, made by adding bromine to a
We attempted to carry out a standard reaction, namely O-silylation with
trimethyl silyl chloride in the presence of lithium bromide. This too failed and so
it was clear that this function must be very sterically hindered and undoubtedly this is
a feature of the acetonide unit.
Next a solution of acetonide 86 in dichloromethane was treated with triphenyl
phosphine and 1,2-dibromotetrachloroethane. 1,2-Dibromotetrachloroethane was
chosen as it is known to lead to a better formal leaving group than carbon tetra-
bromide. The reaction mixture was stirred at room temperature for forty minutes
after which time no reaction had occurred. The reaction mixture was heated to
reflux for ten hours but no product was seen by monitoring the reaction by t.l.c.
As the conversion of acetonide 86 to bromide 177 was proving so difficult to
achieve, we decided to change the protection of the C-3, C-4 diol to try to reduce the
steric bulk of the acetonide. Berchtold et a l have synthesised the cyclic carbonate
93.59 \y e decided to prepare 93 and then attempt to convert the free hydroxyl at C-5
into the bromide 206 (scheme 2.8).
COoMei
(a)
C 02Me C 02Me
HO OHOH
26
(a) N.N'-carbonyl diimidazole, THF, reflux; (b) (i) CBr4, Ph3P, THF, reflux; (ii) CBr4, Bu3P, THF, reflux; (iii) (BrCI2C)2, Ph3P, DCM, reflux.
Scheme 2.8
Methyl shikimate 26 in dry THF was heated to reflux. To this was added
N,N’ -carbonyldiimidazole portion-wise over a five hour period. ̂ 8 xhe reaction was
60
heated to reflux for a further two hours and after work-up was shown to afford the
cyclic carbonate 93 in 78% yield.
Product 93 in THF was treated with carbon tetrabromide and triphenyl
phosphine and heated to reflux for 4 hours. Frustratingly no reaction occurred so we
decided to replace triphenyl phosphine with tributyl phosphine as this had increased
the yield with acetonide 86, but in practise this failed to promote the desired reaction.
Reagents Solvent % Yield of 177
CBr4, Ph3P THF 8
CBr4, Ph3P DCM 9
CBr4, Bu3P THF 15
Ph3P, Br2 THF 0
Ph3PBr2 THF 0
NBS, Ph3P THF 0
PBr3 DCM 0
Me3SiCl, LiBr MeCN 0
(BrCl2C)2 THF 0
(BrCl2C)2 DCM 0
Table 2.9
Next carbon tetrabromide was replaced by 1,2-dibromo-tetrachloroethane in
final bid to try to convert the carbonate 93 into the bromide 206. A solution of
61
carbonate 93 in diethyl ether was treated with triphenyl phosphine and 1,2-
dibromotetrachloroethane. The reaction mixture was heated to reflux for six hours
but no product was forthcoming.
Although we had only been able to synthesise bromide 177 in low yield
(table 2.9), we decided to carry on with the attempted synthesis of 173 and 175, and
then go back and attempt to optimise the route.
The next step in the proposed synthesis involved the introduction of the 2-
methoxycarbonylprop-l-en-3-yl side chain at C-5, by a radical fragmentation reaction
with an appropriate allylstannane.
2.3 Synthesis of Methyl 2-(tri-n-butylstannylmethyI)propenoate 178
The required allylstannane (178) has been synthesised by Baldwin et al
starting from methyl methacrylate 207 (scheme 2.10).90
207 208 209 178
(a) L, p-toluenesulfinate hydrate, MeOH;(b) Et3N, DCM, reflux 8h;(c) Bu3SnH, AIBN, PhMe, reflux 1h.
Scheme 2.10
62
2.3.1 Formation of Methyl 2-iodo-2-methyl-3-(toluene-p-sulfonyl)-propanoate
208
The first step in the reaction to form the allylic tributyltin hydride side chain
178 was the addition of a p-toluenesulfonyl radical (Ts.) and iodine to the carbon-
Scheme 2.11
The first step in the formation of 208 is the production of p-toluenesulfonyl
iodide, formed by the reaction between iodine and sodium p-toluenesulfinate hydrate.
addition of a catalyst, and undergoes spontaneous homolysis in DCM at room
temperature, to give ap-toluenesulfonyl radical (Ts.).
Thep-toluenesulfonyl radical (Ts.) acts as the chain carrier, initially reacting
with the double bond to yield an alkyl radical which reacts rapidly with iodine
(scheme 2.12).
carbon double bond of methyl methacrylate 207 (scheme 2.11). 109
207 208
(a) MeOH, p - T s N a ^ O , l2, 25°C, 2 h
This is reactive enough to combine directly with alkenes in the daylight, without the
^ C 0 2Me |2 \ ^ C Q 2Me
207 208
Scheme 2.12
63
It has been established by Correa and Waters 1 ^ that a heterolytic reaction of
p-toluenesulfonyl iodide is not involved in this reaction by showing that
(i) there is little addition of /?-toluenesulfonyl iodide to vinyl cyanide or to
butadiene in the dark,
(ii) in daylight the addition to methylacrylate and vinyl cyanide is markedly
retarded by the addition of the ‘radical trap’ quinol.
It is extremely unlikely that a Ts+ cation is involved in this type of reaction
since the orientation of addition would be incorrect and in any case the alkene is
electron-poor. Indeed, the Ts+ cation formed by treating /?-toluenesulfonyl chloride
with silver perchlorate or aluminium chloride does not add to methyl acrylate or vinyl
cyanide. HO
Methyl methacrylate 207 in dry distilled methanol was treated with two
equivalents of iodine and two equivalents of /?-toluenesulfenic acid sodium salt
hydrate, and was stirred at room temperature for four hours. 208 was formed as a
white crystalline solid in 71% yield. This was found to photo-decompose on standing
to the yellow crystalline solid 210, and hence it was kept in a darkened environment.
C 0 2Me
IITs/ V " H1
210
When the reaction was repeated but this time allowed to stir for 24 hours ̂ 11
alkene 210 was obtained as the only product in 55% yield. This is obviously formed
as a result of decomposition of 208. The n.m.r. spectrum of 210 exhibits a
singlet at 6= 7.22 p.p.m., corresponding to the resonance of Hi, together with the
appropriate resonances of the tosyl residue.
64
2.3.2 Formation of Methyl 2-((toluene-p-sulfonyl)methyl)propenoate 209
The next step of the synthesis was to form 209, this is possible from either
208 or 210. Elimination of HI was achieved by refluxing 208 or 210 with Et3N in
DCM (scheme 2.13). 112 The reaction was complete after 8 hours giving 209 in 79%
yield. This conflicts with the results of another identical reaction where two products
were formed, one being the more thermodynamically stable compound 210. Indeed,
the initial product of the reaction is 210, which then rearranges under basic conditions
to give the terminally double bonded species 209.109 Presumably 210 is more stable
than 209, because in the former the two electron withdrawing groups are
deconjugated. By following the reaction by t.l.c. analysis, it was possible to see the
gradual formation of the desired product 209 and the disappearance of 210.
C 0 2Me (a) - i ^ , C 0 2Me ► IJ 7Q°>
Ts208
79% ^Ts
209
s « | 87%
1^ G 02Me
1T / ITs
210 +209
60% 15%
(a) Et3N, CH2CI2, reflux, 8 h; (b) Et3N, CH2CI2, reflux, 20 h; (c) Et3N, CHCI3, reflux, 13 h;
Scheme 2.13
Purification of the reaction mixture afforded the required product 209 as a
pale yellow viscous oil. The 1h NMR showed two singlets at 5=6.49 ppm and
5=5.83 ppm corresponding to the signals of the olefinic protons 3-H’ and 4-H\
65
2.3.3 Formation of Methyl 2-(tri-n-butylstannyImethyl)propenoate 178
Tributyltin hydride is currently one of the most widely used reagents in
organic synthesis, due mainly to its versatility as a free-radical reductant. The
reaction of organotin hydrides with alkenes normally yield hydrostannylated species,
which are useful as synthetic intermediates. However, when organotin hydrides are
reacted with allylic sulfides or sulfones, the resulting product is an allyl stannane.
This is an example of a *SH reaction, in which an organotin radical acts as the
attacking species, with the consequent elimination of an organosulfur-centred
radical. 1*3
The key to the *SH stannylation reaction is the regiospecific allyl transfer
from sulfur to tin, in which carbon-tin bond formation is achieved by a homolytic
process. This is a synthetically useful reaction, as generally such allyl stannanes have
been prepared by polar processes involving Grignard reagents or organostannyl
lithium species. These are not viable methods for derivatives containing carbonyl or
cyano functional groups. 112
It has been shown by Sayer, Conlon et al that the attack by the organotin
radical is at the allylic double bond, and not a direct homolytic substitution (SH
process) at the sulfur atom. 114 In experiments using propargyl sulfide and tributyltin
hydride, the reaction mixture was found not to contain a mixture of acetylene and
isomeric allene, which would have been expected if a direct SH process was in
operation (scheme 2.14).
The next step in the formation of the allylstannane involves the reaction of
209 with tributyltin hydride (scheme 2.15),90 followed by (b), the elimination of the
p-toluenesulfonyl group from the product 211 formed in (a). The p-toluenesulfonyl
radical reforms the tributyltin radical in a reaction with tributyltin hydride (c). This is
relatively faster than either of the termination steps (d) and (e).
67
2.4 Methyl 3ot,4a-isopropylidenedioxy-5P-[2-methoxycarbonyI-prop-l-en-3-yI] -
cyclo-hex-l-ene-l-carboxylate 173
The problem with conducting intermolecular reactions by the tin hydride
method is that the initial radical 212 must add to an alkene 213 and not be trapped by
tin hydride, whereas the adduct radical 214 must be trapped by tin hydride so
generating tributyltin radical 215 and not add to the alkene (figure 2.16). 116 The tin
hydride method can be synthetically useful only if the
Ts TsH209
Ts211
Ts
178
Scheme 2.15
required reactions are faster than all the others. A fragmentation approach is a clever
alternative that avoids this selectivity problem. H7 Here the tin is incorporated into
the alkenic unit so that the net effect is substitution rather than reduction. Thus, chain
68
carriers (like B113S11.) are generated by a fragmentation rather than by an atom-
transfer step. Fragmentation methods based on allyltrialkyltin reagents (scheme
2.17) are especially useful. These syntheses benefit from the rapid cleavage of
RX
R ’ 212
213
214 Y
Figure 2.16
a C-Sn bond beta to a radical centre. Therefore, the adduct radical 216 gives an
allylsubstituted product 217 by splitting off a tributyltin radical 215 that reacts with
218 to give 212. Compound 218 can be a halide, xanthate, thioether or selenide.
RX 218 Bu3SnX
Bu3Sn
SnBu3
2 1 6 ^ — SnBu3
Scheme 2.17
Keck et al. first applied such a method to the synthesis of ( i ) -
perhydrohistrionicotoxin (scheme 2.18). 118
69
Bu3Sn
0
(a) PhH, hv.
Scheme 2.18
Giese et al. have recently used a similar stannane 219 to that used by us, as a
synthon of phosphoenol pyruvate (scheme 2.19). 1 ̂
' I
COzEt
A c0~ '\ ^ AcOAcO — ° \ Bu3Sn 219 a _^ >0
Ac O- ► ACA° 0 ^ — v AA Br (a) AcO |
(a) AIBN, PhH, reflux. c 0 2Et
Scheme 2.19
A solution of bromide 177, in degassed toluene, was treated with two
equivalents of the allylstannane 178 and a catalytic amount of AIBN to afford the
carba analogues of protected 5-enolpyruvylshikimate 173 and 179 (scheme 2.20).
70
CO2M6 CO2M6 CO2M©
CO2M6+
CO2M6
177 173 179
(a) AIBN, toluene, reflux.
Scheme 2.20
Two products were observed by t.l.c. (Rf 0.38 and R f 0.41 petrol/ethyl
acetate 4:1) and were separated by column chromatography on silica gel. These were
found by n.m.r. to be the 5-p 173 and 5-a 179 -diastereoisomers respectively .
The spectrum of compound 173 shows distinctive peaks at 5= 5.56 ppm and 5= 6.24
ppm that arise from the resonances of the two protons at C -l\ For compound 179
these peaks are found at 6= 5.86 ppm and 6= 6.43 ppm. The coupling constants for
173 are shown in figure 2.21.
The coupling constants for 173 correlate reasonably well with the values
to be used with caution, especially when electronegative groups are present, it seems
C 0 2 M e
C02Me
aJ d = 3 .0 H z
Ja = 5 .6 H z
J b = 7 .5 H z
Jc = 9 .6 H z
Figure 2.21
calculated from the modified Karplus equation. 120 Even though this method needs
71
to be generally applicable to shikimic acid derivatives and analogues. 121 The
geometry of the cyclohexene ring is essentially defined by the double bond, which
forces the four carbon atoms C-6, C-l, C-2 and C-3 to be coplanar. The ring can then
adopt either a half-chair or boat conformation, of which the former is generally
Rapid conformational inversion is possible at room temperature and the
observed conformation is a statistical average of all the conformations participating in
the inversion cycle. However, the nature of the substituents determines which
conformation is favoured energetically and, providing that the energy differences are
significant, the observed conformation will approximate to the favoured species.
The resonance due to 4-H is especially informative in the spectra of
shikimates. In this case a doublet of doublets was evident at 5= 4.03 p.p.m. 5.6,
J4 5 7.5 Hz). The relatively large 4,5 coupling is consistent with a half-chair
conformation in which the chain at C-5 is in an pseudo-equatorial position and 4-H
and 5-H are in a trans diaxial arrangement. The couplings between the 5-H and the
6a-H and 6p-H protons are consistent with this conformation.
The reaction between bromide 177 and allylstannane 178 was initiated with
AIBN. The dissociation of AIBN in daylight yields two isobutyronitrile radicals with
the consequent elimination of nitrogen (fig. 2,22).
the allylic tributyltin compound 178 in what essentially constitutes a SH’ reaction,
that is formed can then react with the bromine atom of 177 to yield a methyl
favoured. 122
UV
CN CN CN
Figure 2.22
The initiation step of the reaction is the attack by an AIBN derived radical on
with the elimination of a tributyltin radical 215 (scheme 2.23). The tributyltin radical
72
shikimate radical, which can then enter the ‘radical cycle’ by attacking another
tributyltin molecule 178 in a SH’ fashion to give the required carba analogue 173 and
its stereoisomer 179. The liberated tributyltin radical acts as a propagator in reaction
with another molecule of bromide 177. A recent review by C u r r a n 123 detailed
equivalent reaction conditions to those above, but suggested that only the P- stannyl
radical 173 would be formed. The overall yield was similar to the combined yield of
173 and 179. In our hands a 2.6:1 ratio of 5p:5a diastereoisomers was obtained.
Interestingly Giese et a lA ^ observed mainly attack at the equatorial position in their
reaction (scheme 2.19). Dupuis, Giese et al. have shown that the intermediate free
radical adopts the boat conformation 221 so as to maintain
Initiation
COoMeCOoMe
173
COoMe177
178
COoMe COoMe
SnBu
220
Scheme 2.23
73
overlap between the higher energy SOMO of the alkoxyalkyl radical and the LUMO
of the C-0 bond of the adjacent 6-acetoxy group which would then have an axial
disposition (figure 2.24). 124
AcOOAcAcOA cO ^ - AcOAcO
AcOAcOAcO
OAc221
- O - «o
Figure 2.24
In most carbon-centred free radicals the unpaired electron occupies an
orbital which has mainly p-character, so allowing attack from both sides. 124c n ls
clear that on homolysis the stereointegrity at C-5 of 165 is lost, resulting in both the p
and a radicals 220 and 222 (figure 2.25), but we thought that the attacking stannane
178 would then be subject to steric approach control (i) and give the p- product
(schemes 2.25, 2.26). Furthermore the sidechain at C-5 is orientated pseudo-
equatorially, the steric interaction with the acetonide protecting group is minimised,
making 173 the lower energy stereoisomer. The relatively high yield of the
alternative isomer 179 was unexpected.
74
p radical
vs
a radical
220 222
Figure 2.25
177
Bu3Sn
CO2M©
178
C 0 2Me
220
COoMe
o'
X o
173
Scheme 2.26
Much work has been done on cyclohexyl radicals by Green et a l and Lefort
et a l 125 and jn the case of the 4-tbutylcyclohexyl species 223 (figure 2.27) there is
a clear preference for attack at the axial p o s i t i o n . 124 This is a result of reduced
torsional strain, calculated by K. N. Houk et a l , in the developing transition state. 12b
However, even with the stable conformation delivered by the tertiary butyl group, the
reactions of the radical are sensitive to increasing 1,3-axial interactions or the size of
I S
the r e a g e n t . 126 in our cyclohexene the ring is flattened out and it is conceivable that
the constraints imposed in the cyclohexyl case are no longer applicable.
223 *
Figure 2.27
An explanation to account for this observation focuses on the lifetime of the
radical 220 being longer than the time of the fragmentation step which forms the
eventual products. It is possible that distortion of the stereochemistry at C-5 may
have been allowed, thus enabling the approach of stannane 178 both equatorially and
axially.
The reaction between 5a-bromide 177 and allylstannane 178 was then
repeated but this time tertiary butyl peroxide was used as the radical initiator. The
reaction was now complete in five hours and the ratio of 50:5ct was increased slightly
to 2.65:1.
2.5 Thionocarbonates
With the conversion of the secondary alcohol 86 to a bromide being so low
yielding we decided to synthesise analogues of 86 that had different radical leaving
groups. Barton and McCombie have shown that thionocarbonyl derivatives of
alcohols can be deoxygenated with tin halides. *27 O-Alkyl thiobenzoates 224, O-
phenyoxythiocarbonates 225, S-methyl dithiocarbonates 226 and (alkoxy-
(thiocarbonyl))imidazolides 227 (figure 2.28) are reduced to their deoxygenated
compounds by tributyl tin hydride (scheme 2.29). 127,128
76
R - C L . XTS
X = Ph
X = OPh
X = SMe X = Imidazole
224225 Bu3SnH
226
227
R -H
Figure 2.28
In the first step the strong affinity of tin for sulfur leads to radical 228. The
formation of this radical is greatly favoured by the presence of a stabilising group X
such as imidazolyl or S-methyl. Reaction paths A and B compete to lead to either the
adduct 229 or to the formation of radical 230 and from there to product 231. One
possible driving force for the fragmentation of radical 230 (scheme B) is the
formation of a new carbon-oxygen double bond 232.129
R'OH,| |_ / -SnR3
R'OCX -------►
g — SnR3
g — SnR3
R'OCX
228
R3SnH R0CHX
229
B , R3SnH ,R . ► RH230 231+
R3SnS(CO)X232
Scheme 2.29
77
We decided to synthesise a range of thiocarbonyl derivatives and react these
with allyl stannane 178 in a bid to form the carba-analogue 173.
2.5.1 Methyl 3(x,4a-isopropylidenedioxy-5|3-phenylthionoformate-cyclohex-l-
ene-l-carboxylate
After consulting the review by Jasperse et a l . } ^ the first derivative that we
selected was the O-phenoxythionocarbonyl 233 (scheme 2.30). Alcohol 86 in
dichloromethane was treated with pyridine and O-phenyl chlorothionoformate to
afford thionocarbonate 233 as pale yellow crystals in 59% yield.
C 0 2Me C 02Me
(a) ►
O O
86 233
(a) O-phenylchlorothionoformate, py, DCM.
Scheme 2.30
Robins et a l 130 introduced the use of these derivatives as an improvement
over other functional groups first recommended by Barton and M c C o m b i e . l ^ B
Moreover there is a good precedent for our selection from the work by Nagarajan et
al in their synthesis of (± )- silphinene 235 (scheme 2.31). 131 Upon treatment with
tin hydride, thep -\olyl thionocarbonate 234 cyclised to give 235 in 75% yield.
O TolOC(S)0234 235
(a) NaBH4; (b) TolOC(S)CI; (c) Bu3SnH, AIBN.
Scheme 2.31
In our hands the O-phenoxythionocarbonyl 233 was then reacted with allylstannane
178 to try and form compound 173 (scheme 2.32).
Thionocarbonate 233 in toluene, was treated with two equivalents of
allylstannane 178, a catalytic amount (0.025 mmol) of AIBN was added and the
reaction mixture was heated at 80°C for four hours. No product formed (t.l.c.
monitoring), and we concluded that insufficient radical initiator had been added.
Consequently another equivalent of AIBN was added and the reaction mixture was
heated at 80°C for another fifteen hours. Still no product formed and so the
temperature of the reaction was then raised to the boiling point of the solvent.
CO2M0
233 173
(a) AIBN, PhH, reflux.
Scheme 2.32
79
The reaction mixture was heated at reflux for five hours, but still no product
was detected and the starting material was recovered. The reaction was repeated, but
this time benzene was used as the solvent in place of the toluene used previously.
Benzene was chosen in order to lower the risk of hydrogen abstraction from the
solvent, but this procedure also failed.
2.5.2 Methyl 3a,4a-isopropyIidenedioxy-5p-/Molylthionoformate-cyclohex-l-
ene-1-car boxy late
As we were unable to initiate the radical cleavage of 233, we decided to
synthesise the O-p-tolylthionocarbonate 236 (scheme 2.33). Alcohol 86 in
dichloromethane was treated with pyridine and O-p-tolylchlorothionoformate 132 to
afford O-p-tolylthionocarbonate 236 as pale yellow crystals in 85% yield.
C 0 2Me C 02Me
86 236
(a) O-p-tolylchlorothionoformate, py, DCM.
Scheme 2.33
The thionocarbonate 236 was dissolved in benzene and treated with two
equivalents of allylstannane 178 plus a catalytic amount of AIBN and the mixture
was heated at reflux for twenty hours (scheme 2.34). Again no product formed. The
80
reaction was repeated using toluene as the solvent in the hope that the increase in
temperature would increase the rate of the reaction, but after fifteen hours no product
formed.
A different method of radical initiation for the reaction between the
thionocompounds 233 and 236 and allylstannane 178 was then sought. We decided
to repeat the reactions with tertiary butylperoxide, the same initiator that had
increased the yield of the reaction between tributyl tin hydride and tosylate 209
(scheme 2.14). However this change failed to lead to a coupling reaction.
Azobiscyclohexylnitrile (ACN) has been used to good effect as a radical i n i t i a t o r 1^3
by Keck et al. in their synthesis of PGF2a . l34 These workers found that in their
work radical initiation by AIBN was slow and low yielding, even when solutions of
the initiator in benzene had been added slowly to the reaction mixture. By using
ACN in toluene at reflux however, the yield of the reaction was almost doubled (72%
as compared to 43% for AIBN). We repeated our reaction of thionocarbonyls 233
and 236 with allylstannane 178 and this time we used 0.1 equivalents of ACN as our
initiator. The reaction mixture was heated to reflux in toluene for nine hours but yet
again no reaction occurred.
A search of the literature showed that photoirradiation with ultra-violet light is
often sufficient to initiate the reactions of thionocarbonyl compounds with tributyl tin
236 173
(a) AIBN, PhH, reflux.
Scheme 2.34
81
hydride. Such reactions are achieved using Hanovia medium-pressure mercury lamps
equipped with pyrex filters to remove the low wavelength light ( 1< 300 nm ).^ * O-
p-Tolylthionocarbonate 236 in benzene was exposed to a 400W medium-pressure
mercury lamp. After four hours reaction time most of the starting material had
reacted to produce at least twenty different close running spots by t.l.c., but none of
these spots co-incided with those attributable to the desired products 173 and 179.
The reaction was continued for another three hours and even more compounds were
formed but not all the starting material had been used. The reaction mixture was
subjected to column chromatography in an attempt to isolate and characterise some of
the products. Unfortunately no pure compounds could be obtained even after
repeated chromatography. The best we could achieve were samples containing about
five products that ran together on t.l.c. (the difference in R f was only 0.1). n.m.r.
data obtained from these fractions did not appear to show the presence of any alkenic
compounds. For example, the distinctive peaks at 8 = 5.68 ppm and 5 = 6.29 ppm
that arise from the resonances of the two protons at C -l’ of compound 173 were
missing. The reaction was repeated but this time thionocarbonate 233 was used
instead of 236. As before a multitude of products were formed, none of which co
incided with the desired products.
2.5.3 Methyl 3a,4a-isopropylidenedioxy-5p-trichlorophenylthiono-formate-
cyclohex-l-ene-l-carboxylate
Barton et al have recently introduced a new series of thionocarbonates to
improve the radical deoxygenation of secondary a l c o h o l s . 1^5 These increase the
radicophilicity of the thione group by the incorporation of electron withdrawing
groups on an attached phenyl group.
82
We attempted to synthesise the trichlorophenyl 237 and pentafluorophenol
238 derivatives to see if these would react with allylstannane 178 (scheme 2.35).
COoMe
OH
86
0
Cl237
Cl
CO2M©
S F^ F
238 xScheme
2.35
We first tried to synthesise the trichlorophenyl derivative 237. A solution of
alcohol 86 in dichloromethane was treated with triethylamine and the reaction
mixture stirred under an atmosphere of nitrogen. 0-2,4,6-
Trichlorophenylchlorothiono-formate was added dropwise and the reaction was
stirred at room temperature for two hours. T.l.c. analysis (mobile phase = petrol/
ethyl acetate 1:1) indicated no conversion with starting material (86, R f = 0.51)
remaining present. The solvent was removed under reduced pressure and toluene was
added along with a catalytic amount of N-hydroxysuccinimide and the reaction was
heated at 80°C for three hours. T.l.c. analysis (mobile phase = petrol/ ethyl acetate
1:1) indicated no conversion with starting material (86, R f = 0.51) remaining present.
83
2.5.4 Methyl 3-a,4a-isopropyIidenedioxy-5P-pentafluorophenyl-thiono-formate-
cyclohex-l-ene-l-carboxylate
We then tried to synthesise the pentafluoro derivative 238. A solution of
alcohol 86 in toluene was treated with N-hydroxysuccinimide and the reaction
mixture stirred under an atmosphere of nitrogen. Pyridine and
pentafluorophenylchlorothionoformate were then added in sequence and the reaction
mixture was heated at 80°C for 6 hours. T.l.c. analysis (mobile phase = petrol/ ethyl
acetate 1:1) indicated no conversion, with only starting material (86, Rp = 0.51)
remaining present.
2.5.5 Methyl 3a,4a-isopropyIidenedioxy-5p-S-methyldithio-carbonyl-cyclohex-l-
ene-l-carboxylate 239
Unfortunately as we were unable to synthesise either of 237 or 238 we
decided to prepare the xanthate 239 (scheme 2.36). A solution of alcohol 86 in THF
was treated with a solution of sodium hydride and imidazole in THF. The reaction
mixture was stirred under an atmosphere of nitrogen for two hours and was then
treated with carbon disulfide dropwise over fifteen minutes. Methyl iodide was then
added dropwise over fifteen minutes and the reaction mixture stirred for a further
thirty minutes to afford xanthate 239 as colourless prisms in 64% yield.
84
CO2 M6
(a)
CO2 M©
86 239
(a) NaH, Imidazole, THF, CS2, Mel.
Scheme 2.36
Xanthate 239 was then treated with two equivalents of allylstannane 178
(scheme 2.37) and a catalytic amount of ACN, in boiling toluene, to try and form
173. Unfortunately none of the desired product was obtained.
CO,Me c ° 2 Me CO,MeI | I
«? 178I I 0 Bua I I II o s M e ~ £ ) * ’ ° '
* \ ° " A °239 173
(a) ACN, PhMe, reflux.
Scheme 2.37
At this stage because the radical reactions between thionocarbonates 235, 236
and 239 and allylstannane 178 had been unsuccessful we decided to return to our
original plan of synthesising 5-bromo shikimates.
85
2.6 Synthesis of 5p-bromoshikimate 165
We needed to synthesise further supplies of methyl 5-bromoshikimate and we
were attracted by a paper by Knowles and A n d e r s o n , ̂ 6 who synthesised 5p-
bromoshikimate 165 from methyl shikimate 26 via Berchtold's e p o x i d e ^ 120
(scheme 2.38). The epoxide was formed from methyl shikimate by the Mitsunobu
reaction and then ring opened regioselectively by treatment with Li2NiBr4 .137
CO2M6 CC^Me CO2M6
(a), (b) ►
(a) Ph3P, DEAD. THF; (b) 120°C, 0.5 mmHg; (c) LfeNiBr.,, THF.
Scheme 2.38
2.6.1 Epoxide Formation - The Mitsunobu Reaction
We decided to follow a similar route to synthesise bromide 165 (scheme 2.39)
but to open the epoxide with lithium bromide and acetic acid. (-)-Methyl shikimate
26, in THF, was cooled to 0°C and was treated with two equivalents of triphenyl
phosphine and two equivalents of freshly distilled DEAD. This gave the epoxide 120
in 27% yield as a pale yellow oil, which crystallised on standing as long colourless
needles.
86
OH120 165
(a) LiBr, AcOH, THF.
Scheme 2.39
The reason for the low yield of the reaction was the problem in removing the
triphenylphosphine oxide that is generated in the reaction. Following the procedure
by Berchtold et al.,^9 we decided to distil the reaction mixture prior to
chromatography. Thus the solvent was removed from the reaction mixture under
reduced pressure and the residue was then distilled using a Kugelrohr apparatus.
Material distilling up to 130°C at a pressure of 0.5mm was collected and this was
diluted with diethyl ether, which caused N,N,-bis(ethoxycarbonyl)hydrazine to
precipitate, The solvent was removed from the filtrate to afford epoxide 120 in 35%
yield after chromatography. This was an improvement on the previous synthesis but
was still not as good as we had hoped.
2.6.2 Methyl 3a,4a-isopropylidenedioxy-5|3-methanesulfonyloxy-cyclohex-l-ene-
1-carboxylate
Another route to epoxide 120 was then sought. We decided to convert the
free hydroxyl group of 86 to a good leaving group i.e. triflate or mesylate. After
deprotection of the acetonide we envisaged that the leaving group of the product
could then be displaced to give the epoxide 120.
87
The mesylate derivative 240 was obtained by treatment of 86 with
methanesulfonyl chloride and pyridine in dichloromethane at 0°C (scheme 2.40).
After the addition of methanesufonyl chloride the reaction was allowed to
warm to room temperature. After seventy one hours the mesylate 240 was produced
in 68% yield as a clear colourless oil, that was crystallised from chloroform. By
reacting methyl shikimate 86 in pyridine in the absence of dichloromethane the
reaction was complete in only seventeen hours and in 80% yield. Removal of the
pyridinium chloride generated in the reaction was a problem as it has an almost
identical R f to that of the product. In order to simplify the work-up triethylamine
was used instead of pyridine. This gave a bright yellow precipitate immediately on
the addition of the methanesufonyl chloride, and the reaction was complete in only
fifteen minutes giving a yield of 240 of 98%.
Ir ^ i (a >
CO2M6 CO2M6
86 240
(a) (method 1) py, MsCI, DCM, 0°C - R.T., 68%; (method2) py, MsCI, 0°C - R.T., 80%; (method3) Et3N, DCM, THF, 0°C - R.T., 98%
Scheme 2.40
The triethylammonium chloride is easy to remove from the reaction mixture
and any which remains in the crude product can be easily separated by column
chromatography (table 2.41).
88
Reagents % yield of 240
py, MsCI, DCM 68
Py, MsCI 80
EtsN, MsCI, THF, DCM 98
Table 2.41
2.6.3 Methyl 3a,4a-dihydroxy-5P-methanesuIfonyloxy-cycIohex-l-ene-l-
carboxylate
The next step involved the removal of the acetonide protecting group (scheme
2.42). We decided to use the method that has been demonstrated to work well in the
shikimate series of compounds.35,103 a solution of protected mesylate 240 in
tetrahydrofuran was treated with aqueous acetic acid. This was heated to 60°C for
thirty five hours to afford mesylate 241 in 79% yield.
C 0 2Me C 0 2Me
(a)
O’0
240 241
(a) (methodl) AcOH, THF, H2O,60°C, 3 h, 79%; (method2) 1N HCI, THF, 55°C, 2.5h, 52%; (method3) 1N HCI, THF, 5h, 81%.
Scheme 2.42
Keck et a/. 138 recently reported a quick method for the removal of
acetonides. This gives high yields and uses aqueous hydrochloric acid in
tetrahydrofuran. In an effort to speed up the removal of the acetonide from 240 we
decided to follow this procedure. To a solution of mesylate 240 in tetrahydrofuran
was added a 1M solution of hydrochloric acid. This was heated to 50°C for two and
half hours to afford the unprotected mesylate 241, but in only 52% yield. Fortunately
when a solution of 240 in THF was treated with 1M HCI and stirred at room
temperature the reaction was complete after five hours and afforded the product in
81% yield (table 2.43).
Reagents % yield of 241
AcOH, H2O, THF, 60°C 79
1MHC1, THF, 55°C 52
1M HCI, THF 81
Table 2.43
2.6.4 Methyl c«-3-hydroxy-4,5-oxycyclohex-l-ene-l-carboxylate
The final step in our renewed synthesis of epoxide 120 involved the
elimination of the mesylate functionality from 241 (scheme 2.44). 138 a solution of
the mesylate 241 in tetrahydrofuran, was treated with a slight excess (1.1 equiv.) of
potassium tertiary butoxide. After three hours this afforded the epoxide 120 as a
colourless oil, which rapidly crystallised as white needles in 43% yield.
Scheme 2.44
When a solution of 241 in THF was treated with potassium tertiary butoxide
at 0°C the yield was increased up to 51%. By cooling the reaction mixture to -78°C
before the addition of the potassium tertiary butoxide the yield increased still further
to 95% (table 2.45).
Reagents %yield of 120
KO*Bu, THF 43
Ko 'b U, THF, 0°C 52
K o W , THF, -78°C 95
Table 2.45
A comparison of the H n.m.r of the epoxide 120 formed from methyl shikimate with
that formed via the mesylate 241 showed them to be identical. Our route produced
epoxide 120 from (-)-methyl shikimate 26 in an overall yield of 74%. This compares
favourably with the 35% yield of epoxide 120 we obtained by the Mitsunobu
r o u te d as used by Berchtold et al.59 (section 2.6.1).
91
2.6.5 Halohydrin Formation
The next step involved the ring opening of the epoxide to give either the
bromo or iodo halohydrin 165 or 242. The regiospecific opening of epoxides to give
halohydrins has generated considerable interest. Methods based upon hydrogen
halides are not considered appropriate because they often lead to the formation of
reaction byproducts. The opening of unsymmetrically substituted epoxides with
Br2/PPh3, BBr3, Me2BBr6, (Me2N)2BBr, Me3SiBr, pyr.HCl or BF3.Et20/n-Bu4NI
suffers from moderate regioselectivity and/or the propensity to react with a range of
nucleophilic functional groups. More recently dilithium tetrabromonickelate
(Li2NiBr4) was reported to be a source of “soft” nucleophilic bromide, which
regioselectively converts epoxides to halohydrins under mild conditions. Many of the
above methods require the in situ preparation of the reagents, and no single
procedure is suitable for the preparation of both bromo and iodo halohydrins.
A method to open the epoxide in a regiospecific fashion which has none of the
above problems was sought. We decided to use the approach devised by Bajwa and
Anderson. 139 They used lithium halides, in the presence of acetic acid, to convert
epoxides regioselectively to halohydrins under mild conditions, even when sensitive
functional groups were present. By changing the lithium salt it is possible to generate
either the iodo- of bromohydrin, so giving easy access to the 5-iodo compound 242 as
well as the bromo compound 165.
We decided to synthesise the iodocompound 242 as iodo compounds are
known to more readily undergo radical elimination reactions with stannanes. The
transferability of various atoms and groups X (figure 2.46) to tin radicals is
generally in the order I > Br > SePh ~OC(S)SMe > Cl > SPh.140 The reactivity of
various radicals R. toward tin hydride is aryl « vinyl > alkyl > allyl « benzyl.
92
Primary, secondary, and tertiary alkyl radicals show very little difference in their
reactivity toward tin hydride.
R* + + X*
Figure 2.46
A solution of epoxide 120 in THF was treated with acetic acid and lithium
bromide to give bromide 165 in 78% yield (scheme 2.47).
The proposed mechanism for the reaction involves reversible epoxide ring
opening by attack by a bromide ion. The reaction is then driven to completion by
protonation of the intermediate alkoxide 243 by acetic acid to give halohydrin 165
(scheme 2.48). The acetic acid also reduces the basicity of the halide ions which in
some cases can lead to side products.
C 02Me C 02Me
OH120 165
(a) LiBr, AcOH, THF.
Scheme 2.47
93
CO2 M6
LiB r (1.6 equiv)
HOTHF, rt
O
120
HO
COoM© CO2 M6
AcOH
165
Scheme 2.48
The 5-p- iodo compound 242 was formed in a similar way to that of bromo
165. A solution of epoxide 120 in THF was treated with acetic acid and lithium
iodide to give iodide 243 in 85% yield (scheme 2.49). Care was taken to exclude
light from the reaction due to the weakness of the C-I bond, as we did not want any
side reactions to complicate the outcome of the process.C 09Me1
(a)
C 0 2Me
HO HOOH242120
(a) Lil, AcOH, THF.
Scheme 2.49
2.6.6 Protection of Halohydrins
To prove the regiochemistry of the bromide 165 and the iodide 242 the
suspected 2,3-c/s diol functionalities were protected as their respective acetonides,
180 and 244 (scheme 2.50). This was done in the same way as the protection of
methyl shikimate 26 (section 2.2.1).
94
The formation of the acetonide indicated that the epoxide 120 had indeed been
regioselectively opened by lithium bromide to yield the bromide 165 and not the
bromide 245.
The H-4,H-5 coupling for 165 is consistent with a half-chair conformation in
which the bromide at C-5 is in an equatorial position and 4-H and 5-H are in a trans
diaxial arrangement. The couplings between the 5-H and the 6a-H and 6P-H protons
are consistent with this conformation.
C 0 2Me
HO
HO
C 02M©I
Br OH
165
C 02Me
OH242
(a)
(a)
C02Me
v244
(a) 2,2-Dimethoxypropane, p-TsA
Scheme 2.50
C 02Me
Rapid Decomposition
HO 1Br
OH
245
95
2.7 Coupling Reactions to Afford Methyl 3a,4a-isopropylidenedioxy-5P-[2-
methoxycarbonylprop-l-en-3-yl] -cyclo-hex-l-ene-l-carboxylate 173 and Methyl
3a,4a-isopropylidenedioxy-5a-[2-methoxycarbonylprop-l-en-3-yl] -cyclo-hex-l-
ene-l-carboxylate 179
A solution of bromide 180, in degassed toluene, was treated with two
equivalents of the allylstannane 178 and a catalytic amount of AIBN to afford the
carba analogues of protected 5-enolpyruvylshikimate 173 and 179 in an overall yield
of 46% (scheme 2.51). A 2.7:1 ratio of 5p:5a diastereoisomers was obtained which
is in contrast to the radical coupling reaction between 180 and 178 where only a 2.6:1
ratio was observed.
179173180
Scheme 2.51
When ACN was used as the radical initiator instead of AIBN the reaction was
complete in only two hours in an overall yield of 62%. This time the ratio of 5p -
carba chain (173) to 5a -carba chain (179) was 3.35:1. This increase in the desired
5p diastereoisomer 173 is obviously due to the decreased reaction time.
Now that we had managed to assemble the carbon skeleton which we had
targeted, in a reasonable yield from shikimic acid 1 (27%), the remaining steps in the
synthetic sequence to the desired 5p -methylene lactone 175 were simple deprotection
steps.
96
2.8 Acetonide Deprotection
The acetonide protecting group was removed by treatment of 173 with mild
acetic acid (2:1:1 acetic acid / water / tetrahydrofuran) to form the corresponding diol
246 in 38% yield (scheme 2.52). In the course of the reaction, it was found by t.l.c.
monitoring that two products were present in the reaction mixture. Their Rfs in
hexane - ethyl acetate (1:3) were 0.49 and 0.40, suggesting that they were of a similar
polarity. Once the products had been isolated by column chromatography, n.m.r.
data showed them to be the desired lactone 175 and the diol 246 respectively.
COoMe COoM© COoMeI i i
r ^ i ii r^ i r^ iI I U — - J I - J I IIO C 0 2Me Hq ‘ ; > HO i ^ ' ^ C C ^ M e
° ^ OH
0173 175 246
Scheme 2.54
This result was surprising since Ganem et al. and Bartlett et a l reported no
evidence of any lactone formation in similar reactions with the enolpyruvyl
equivalents of our compounds (section 1.3.2, scheme 1.29 and scheme 1.30).61,62
Both Ganem and Bartlett deprotection reactions were performed over a much shorter
time scale than ours, and so it was thought that the deprotection and cyclisation were
time dependent. The reaction was then repeated, but even with increased reaction
times the relative ratio of diol to lactone could not be increased in favour of the
lactone. Although not all of 173 could be converted to the lactone 175 via this one
reaction, the result was nevertheless synthetically useful as the remaining diol 246
could be cyclised to give the desired lactone 175 by following either the work
undertaken by Ganem^l or Bartlett^ (section 1.3.2 , scheme 1.29 and scheme
1.30).
97
2.9 Formation of 7>0/fs-8a-Hydroxy-6-methoxycarbonyl-3-methylene-4a,5,8,8a-
tetrahydro-4H-benzo [e] pyran-2-one 175
Ganem et a l61 reported a three stage deprotection sequence from the
enolpyruvly diol diester through to the corresponding lactone via the associated
enolpyruvyl diol acid. The acetonide was removed by using aqueous acetic acid, the
resulting diol was then treated with aqueous base to give the mono ester which when
treated with DCC / DMAP cyclised to give lactone 103 (scheme 1.29). Bartlett^
reported a direct method of cyclisation from the diol by using potassium carbonate
(scheme 1.30). This method precludes the necessity of activating the side chain
carbonyl group for ring closure as described by Ganem.
Treatment of our diol diester 246 with potassium carbonate in acetonitrile at
50°C afforded lactone 175 in 63% yield (scheme 2.53).C 0 2Me COoMeI i
(a )
■ L A X —HO i C 02Me HO
OH ° y ^
0
246 175
(a) K2C 0 3.Scheme 2.53
Lactone 175 shows distinctive peaks at 8 = 5.66 ppm and 8 = 6.48 ppm that
arise from the resonances of the two protons at C -l\ For lactone 175 a doublet of
doublets was evident at 8 = 4.23 p.p.m. (J4t3 3.0, J ^ s 10.5 Hz, 4-H). The relatively
large 4,5 coupling is consistent with a half-chair conformation in which the chain at
C-5 is in an equatorial position and 4-H and 5-H are in a trans diaxial arrangement.
98
The couplings between the 5-H and the 6a-H and 60-H protons are consistent with
this conformation (figure 2.54).
Figure 2.54
2.10 Coupling Reactions to Afford 7>flHs-8a-Hydroxy-6-methoxy-carbonyl-3-
methylene-4a,5,8,8a-tetrahydro-4H-benzo[e]pyran-2-one (175)
A more direct route to lactone 175 is possible by coupling bromide 180 or
iodide 242 with allylstannane 178 (scheme 2.55).
d
C02Me
J c = 9 .0 H z
J d = 3 .0 H z
O
X = Br 180 X = I 242
O175
O247
(a) ACN, PhMe, reflux.
Scheme 2.55
99
A solution of bromide 180 in toluene was treated with allylstannane 178 and a
catalytic amount of ACN. Boiling the reaction mixture for three hours afforded 5-|3-
lactone 175 in 51% yield along with 5-a-lactone 247 in 19% yield. When we
replaced bromide 180 with iodide 242 and repeated the reaction lactone 175 was
formed in 56% yield after only two hours, with lactone 247 being formed in 23%
yield.
Lactone 247 shows distinctive peaks at 8 = 5.65 ppm and 8 = 6.53 ppm that
arise from the resonances of the two protons at C -l\
2.11 Further Epoxide Opening Reactions
2.11.1 Attempted Synthesis of an Analogue of Tetrahedral Intermediate 12
Tetrahedral intermediate 12 is an unstable compound that is involved in the 5-
EPS-3-P reaction. Stable analogues of this high energy intermediate would be
expected to benefit from the extra binding affinity that these species e x p e r i e n c e . ^
c o 2h
\ / C F 2P(0)(0Et)2\ / ° ©
> HO C 0 2Me0 c o 2h
OH
12 248
Compound 248 has recently been synthesised in the Bath L a b o r a t o r y ! ^ and
so we decided to try and open epoxide 120 with 248 to generate analogue 249
(scheme 2.56).
© o'-
100
C0 2 M©I
CF2P(0)(0Et)2
CO2 M6
HO HO . 0 / V s C 0 2Me OH
O
120 249
Scheme 2.56
Sharpless et al. have used titanium isopropoxide to open epoxides with a
variety of nucleophiles. 142 Following this procedure, a solution of epoxide 120 in
benzene was treated with methyl [3,3-difluoro-3-(diethoxyphosphinyl)-2-hydroxy-2-
methyl]propionate 248 and one equivalent of titanium isopropoxide. The reaction
mixture was then boiled for four hours but t.l.c. indicated that no reaction had
occurred. The reaction was repeated but this time 2 equivalents of titanium
isopropoxide was used. After stirring at room temperature for three hours a new
product spot was visible by tl.c. The new product was isopropyl 3a ,4ot-hydroxy-5 (3-
isopropylcyclohex-l-ene-l-carboxylate 250. There is some precedence for the
opening of epoxides by isopropyl alcohol formed from titanium isopropoxide. 143
fluorocompound 248 we decided to use another Lewis acid. The reaction was
repeated but this time BF3 .Et2Q l44 was usecj instead of the Ti(CMPr)4 .
C 0 2'Pr
OH
250
2.11.2 Fluorohydrin Formation
As the titanium isopropoxide(Ti(0 1Pr)4) had opened the epoxide instead of
101
Unfortunately, this time epoxide 120 was opened with fluorine to give 251 in 8%
yield (scheme 2.57). Takaishi et al have reported the opening of tricyclic epoxides
with BF3 .Et2 0 to form fluorohydrins. 145
To confirm the structure of 251, epoxide 120 was treated with H F . p y l 4 6 a n d
fluorohydrin 251 was formed in 43% yield.
CO2M61
CO2M©
0OH
120 251
Scheme 2.57
A shortage of time meant that further investigations into the opening of
epoxide 120 with 248 could not be undertaken.
102
EXPERIMENTAL
Solvents and reagents
All solvents were distilled and dried before use. Petrol refers to petroleum
ether boiling in the range 60-80°C. Tetrahydrofuran (THF) was pre-dried over
sodium wire and then heated to reflux over sodium benzophenone ketyl under an
atmosphere of nitrogen until anhydrous. This was redistilled prior to use. All other
solvents and reagents were purified using the procedures described in Purification o f
Laboratory Chemicals. 147
Chromatography
Thin layer chromatography (t.l.c.) was used extensively as a qualitative guide during
reactions and for assessing purity of compounds. Merck DC-alufolien Kieselgel 60
F254 sheets containing fluorescent indicator were used and were visualised using
ultra violet light wavelength 254nm where possible. Plates were developed by
treatment with a 0.5% (w/v) aqueous solution of potassium permanganate, followed
by warming of the plate.
Medium pressure flash columns were routinely run using Amicon Matrex 60A silica
gel. Flash chromatography was performed under medium pressure using a small
hand bellow. Columns were packed as a slurry, the material to be chromatographed
introduced as either a solution in the eluting solvent, a solution in DCM or
preabsorbed on to silica and then applied as a thin layer to the top of the column.
103
Spectroscopy
The multiplicities of the resonances are denoted as follows: s (singlet), d (doublet), t
(triplet), q(quartet) and m(multiplet)(br denotes a broad peak).
Melting points (m.p.) were determined on Electrothermal Mk III apparatus and are
uncorrected.
Elemental micro-analyses were carried out using a Carlo-Erba 1106 Elemental
Analyser.
Infrared spectra were recorded in the range 4000-600 cm"^ using a Perkin-Elmer
1310 spectrophotometer and peaks are reported in wavenumbers (cm-*). Samples
were prepared as nujol mulls unless otherwise stated.
1 13H and C nuclear magnetic resonance (n.m.r.) spectra were recorded on a Jeol
GX270 (270MHz) spectrometer or on a Jeol GX400 (400MHz) spectrometer where 13stated. For C, operating frequency was 67.8 MHz, using 90 and 135 DEPT pulse
sequences to aid multiplicity determinations. Samples were prepared in solutions of
CDCI3 unless otherwise stated.
6 values are expressed as parts per million (p.p.m.) downfield from tetramethylsilane
internal standard.
Mass spectra were recorded on a VG 7070E mass spectrometer.
104
Experimental Procedure:
Synthesis of Methyl 3a,4a,5p-trihydroxycycIohex-l-ene-l-carboxylate (Methyl
Shikimate) (26)
HCI gas (dry) was bubbled through a solution of shikimic acid (3g, 17mmol) in dry
methanol (40 ml) for 2 hours. The methanol was removed under reduced pressure to
give a dark red/ brown oil (6.5g). Column chromatography (ethyl acetate) gave the
title compound 26 as a white solid (3.08g, 95%).
RF 0.33 (ethyl acetate);
m.p. 114 -115.5°C, (Lit.148 115- 116.5°C);
vmax (nujol mull) 3315(OH), 1690(C=O), 1630(C=C) cm-1;
Sh (CD3OD) 2.24 (1H, ddd, 7geml8.5, 76p,5 6.5, 76p,2 2.0, 76p,32., Hz, 6P-H),
2.76(1H, ddd, Jg tm 18.5, 76a, 5 6.5, 76a,2 2.0, 76a ,3 2 0 Hz, 6a-H), 3.82(3H, s,
OMe), 3.78(1H, dd, 75,4 8.0, 75,6a 5.0 Hz, H-5), 3.9(1H, dd, 74,5=8.0, 74,3 3.5 Hz,
H-4), 4.38(1H, d, 73,2 4.0, 73,4 3.5 Hz, H-3), 6.78 (1H, ddd, 72,3 4.0, 72,6a 2.0,
72,6P 2.0 Hz, H-2);
8c (CD3OD) 31.6(C-6), 52.4(OMe), 67(C-5), 68(C-4), 72.3(C-3), 130(C-1), 139(C-
2), 169(C=0);
m/z (C. I.) 188 (M+, 4%).
105
Synthesis of Methyl 3a,4a-isopropylidenedioxy-5p-hydroxycyclohex-l-ene-l-
carboxylate (86)
Method 1
A solution of methyl shikimate 26 (2g, 10.6mmol) in acetone (100ml) was treated
with 2,2-dimethoxy propane (5.54g, 53mmol). A catalytic amount of p-
toluenesulfonic acid monohydrate was added and the reaction mixture was stirred
under a nitrogen atmosphere at room temperature for 24 hours. The solvent was
evaporated under reduced pressure to give a brown oil (4.3g). Column
chromatrography (petrol-ethyl acetate 1:1) gave the title compound 86 as a very pale
yellow oil (2.06g, 85%).
RF 0.51 (petrol- ethyl acetate 1:1);
vmax (nujol mull) 3435(OH), 1715(C=0), 1630(C=C) cm’1;
Sh (CD3OD) 1.40(3H, s, Me), 1.44 (3H, s, Me), 2.25(1H, dddd, 7 gem 17, 76p,5 8-5,
76p,2 2.0, J 6P,3 2.0, 6p-H), 2.75(1H, dddd, Jgem 17, 76a ,5 4.5, 6<x-H), 3.23(1H, br
s, 5-OH), 3.78(3H, s, OMe), 3.90(1H, m, H-5), 4.11(1H, dd, 74,5 8.0, 74,3 6.5 Hz, H-
4), 4.78(1H, br m, H-3), 6.92(1H, ddd, 72,3 3.5,72,6a 2.0,72,6p 10Hz, H-2);
8c (CD3OD) 25.6(Me), 27.8(Me), 29(C-6), 52(OMe), 68.4(C-5), 72(C-4), 78( C-3),
110(CMe2), 130 (C-l), 134(C-2), 167(C=0).
Method 2
A solution of methyl shikimate 26 (2.5g, 13.3mmol) in 2,2-dimethoxy propane
(13.3g, 133mmol), was treated with a catalytic amount of /Moluenesulfonic acid
monohydrate and the reaction stirred under a nitrogen atmosphere at room
temperature for fifteen minutes. The solution was neutralized with saturated sodium
106
bicarbonate, solution extracted with diethyl ether (3x30 ml), dried (MgS04) and the
solvent evaporated under reduced pressure to give a brown oil (5.7g). Column
chromatography (petrol-ethyl acetate 7:3 - 1:1) gave the title compound as a
colourless oil which crystallised on prolonged standing to give a white solid (3.09g,
98%).
m.p. 183-184.5 °C (Lit.58 185°C).
Synthesis of Methyl 3a,4a-isopropyIidenedioxy-5a-bromocycIohex-l-ene-l-
carboxylate (177)
Method 1
A dry flask was charged with 86 (4.3 lg, 19mmol) and tetrahydrofuran (150ml).
Carbon tetrabromide (12.20g, 38mmol) was added, followed by triphenylphosphine
(9.72g, 38mmol). The flask was flushed with nitrogen and the reaction mixture was
heated at reflux for 6 hours. After cooling to room temperature the organic solvent
was evaporated under reduced pressure to give a yellow oil (12.4g). Column
chromatrography (petrol-ethyl acetate 4:1) gave the title compound as an off-white
solid (438mg, 8%) and diene 195 as a white solid (80mg, 2%).
177
RF 0.51 (petrol-ethyl acetate 4:1);
m.p. 101-102 °C (Lit.103 103 - 105°C);
Vmax (nujol mull) 1700 (C=0), 1625 (C=C);
107
5 h (CDCI3) 1.39 (3H, s, CCH3), 1.44 (3H, s, CCH3), 2.86 (1H, dddd J gem = 16.5,
J6p-5 = 11.0, 2.75, Hz H-6P), 2.94 (1H, dd, J gem = 16.85, J6a-5 = 5.55 Hz, H-
6a), 3.78 (3H, s, C02Me), 4.18 (1H, ddd J 5,6p = 11.0, J 5,6a = 5.6, J s ;4 = 2.0 Hz
H-5), 4.58 (1H, d, m J=5.3 Hz, H-4), 4.73 (1H, m, H-3), 6,77(1H, d, m, J2 .4 Hz, H-
2);
8c (CDCI3) 26.5 (Me), 27.6 (Me), 29.8 (C-6), 43.7 (C-5), 52.4 (OMe), 73.0 (C-4),
76.1 (C-3), 110 (CMe2), 130.4 (C-l), 135.1 (C-2), 166.2 (C=0);
m/z (C.I.) 293 (M+ 97 (Br81)), 291(M+ 100 (Br79)), 277 (40), 275 (41), 235 (52),
233 (50), 153 (90), 137 (59).
195
RF 0.21 (petrol- ethyl acetate 1:1);
m.p. 53-56 °C (Lit. 34 54-57 °C);
8h (CDCI3) 1.39 (3H, s, Me), 1.41 (3H, s, Me), 3.80 (3H, s, OMe), 4.65 (1H, ddd,
J4,3 = 9.0, J4,5 = 4.0, J4,6 = L0, Hz, 4-H), 4.81 (1H, dd, J3,4 = 9.0, J3,2 = 4.0, Hz,
3-H), 6.04 (1H, ddd, J s ,6 = 10.0, J 5;4 = 4.0, J5t2 = 1.0, Hz, 5-H), 6.54 (1H, br d,
J 6.5 = 10.0, Hz, 6-H), 6.86 (1H, ddd, J2,3 = 4.0, J2,6 = 15, J2,5 = 1.0, Hz, 2-H).
Method 2
A dry flask was charged with 86 (860mg, 3.77mmol) and dichloromethane (30ml).
Carbon tetrabromide (2.5g, 7.54mmol) was added, followed by triphenylphosphine
(1.98g, 7.54mmol). The flask was flushed with nitrogen and the reaction mixture
was heated at reflux for 8 hours. After cooling to room temperature the organic
solvent was evaporated under reduced pressure to give a yellow oil (5.4g). Column
108
chromatrography (petrol-ethyl acetate 4:1) gave the title compound as a white solid
(99mg, 9%) and diene 195 as (40mg, 5%).
Method 3
A dry flask was charged with 86 (600mg, 2.63mmol) and tetrahydofuran (40ml).
Carbon tetrabromide (980mg, 2.89mmol) was added, followed by tributlyphosphine
(586mg, 2.89mmol). The flask was flushed with nitrogen and heated at reflux for 6
hours. After cooling to room temperature the organic solvent was evaporated under
reduced pressure to give a yellow oil (2.78g). Column chromatrography (petrol-ethyl
acetate 4:1) gave the title compound as a white solid (114mg, 25%) and diene 195
(34mg, 6%).
Attempted Synthesis of Methyl 3a,4a-isopropyIidenedioxy-5a-bromocyclohex-
1-ene-l-carboxylate 177
Method 1
A solution of 86 (325mg, 1.43mmol) in THF (20ml) was treated with a solution of
triphenyl phosphine (411 mg, 1.57mmol) in THF (10ml) under an atmosphere of
nitrogen. Bromine (5ml) was then added dropwise over a fifteen minute period,
making sure that the flask temperature was maintained below 55°C. The addition of
bromine was stopped when 2 drops persisted in giving the solution an orange tint.
T.l.c. analysis of the reaction mixture revealed that no product had been formed and
so the reaction mixture was stirred for four hours. Still t.l.c. analysis revealed the
presence of starting material and no product and so the reaction mixture was boiled
overnight. T.l.c. analysis (mobile phase = petrol/ ethyl acetate 1:1) indicated no
conversion with starting material (86, R f = 0.51) remaining present.
109
Method 2
A solution of 86 (lOOmg, 4.4mmol) in MeCN (25ml) was treated with a solution of
dibromo triphenyl phosphine (370mg, 8.8mmol) under an atmosphere of nitrogen.
The reaction mixture was stirred at room temperature for three hours. T.l.c. analysis
of the reaction mixture revealed that no product had been formed. The reaction
mixture was then boiled for five hours. T.l.c. analysis (mobile phase = petrol/ ethyl
acetate 1:1) indicated no conversion with starting material (86, R f = 0.51) remaining
present.
Method 3
A solution of triphenyl phosphine (185mg, 0.70mmol) in THF (10ml) was added
dropwise with stirring to a solution of of N-bromo succinimide (124mg, 0.70mmol)
in THF (5ml). To this was added a solution of 86 (146mg, 0.64mmol) in THF (ml).
The reaction mixture was then stirred for 4 hours but t.l.c. indicated no conversion.
The reaction mixture was then boiled for 5 hours. T.l.c. analysis (mobile phase =
petrol/ ethyl acetate 1:1) indicated no conversion with starting material (86, R f =
0.51) remaining present.
Method 4
A solution of 86 (102mg, 0.45mmol) and phosphorus tribromide (181mg, 0.67mmol,
1.5 eq) in DCM (10ml) was stirred for 16 hours, after which, t.l.c. analysis (mobile
phase = petrol/ ethyl acetate 4:1) indicated no conversion. The reaction mixture was
then boiled for seven hours. T.l.c. analysis (mobile phase = petrol/ ethyl acetate 1:1)
indicated no conversion with starting material (86, R f = 0.51) remaining present.
The solution was neutralised with saturated sodium hydrogen carbonate, extracted
into ethyl acetate (2x 40ml), dried (MgSC>4), filtered and concentrated under reduced
110
pressure to give an oil which was flash chromatographed to afford the starting
material.
Method 5
A solution of lithium bromide (648mg, 7.46mmol) in acetonitrile (20ml) was treated
with chlorotrimethylsilane (l.Olg, 9.33mmol) with good stirring under an atmosphere
of nitrogen. A solution of alcohol 86 (850mg, 3.73mmol) in acetonitrile (10ml) was
then added and the reaction mixture was heated under reflux for twelve hours. T.l.c.
analysis (mobile phase = petrol/ ethyl acetate 1:1) indicated no conversion with
starting material (86, R f = 0.51) remaining present.
Method 6
A solution of alcohol 86 (206mg, 1.1 mmol) in diethyl ether (2ml) was treated with a
solution of triphenyl phosphine (575mg, 2.2mmol) in diethyl ether (5ml). A solution
of dibromotetrachloroethane (714mg, 2.2mmol) in diethyl ether (1ml) was added
slowly with stirring After two hours t.l.c. analysis showed no conversion and so the
reaction mixture was heated under reflux overnight. T.l.c. analysis (mobile phase =
petrol/ ethyl acetate 1:1) indicated no conversion with starting material (86, R f =
0.51) remaining present.
Method 7
A solution of alcohol 86 (230mg, 1.3mmol) in dichloromethane (2ml) was treated
with a solution of triphenyl phosphine (672mg, 2.6mmol) in dichloromethane (1ml).
A solution of dibromotetrachloroethane (714mg, 2.6mmol) in dichloromethane (2ml)
was added slowly with stirring After one hour t.l.c. analysis showed no conversion
I l l
and so the reaction mixture was heated under reflux for three hours. T.l.c. analysis
(mobile phase = petrol/ ethyl acetate 1:1) indicated no conversion with starting
material (86, R f = 0.51) remaining present.
Synthesis of Methyl [lR-(la,5a,6a)]-5-hydroxy-8-oxo-7,9-dioxabicydo[4.3.0]-
non-2-ene-3-carboxylate (93)^9
A solution of 26 (517mg, 2.97mmol) in THF (50ml) was heated at reflux under an
atmosphere of nitrogen. 1,1’-Carbonyl diimidazole (1.926g, 11.88mmol) was added
portion-wise over a period of five hours. The reaction mixture was then boiled for a
further 2 hours and then allowed to cool to room temperature. A solution of 6M HCI
(15ml) was then added and the reaction mixture was stirred for 2 hours. Most of the
THF was removed under reduced pressure to give a pale yellow oil. This was
partitioned between ethyl acetate (2x30 ml) and water. The organic extracts were
combined, dried (MgSC>4) and concentrated in vacuo to give an oil that was taken up
in ether (60ml) and stirred under reflux for 2 hours. Insoluble material was filtered
off and the solvent removed under reduced pressure. Column chromatography
(hexane-ethyl acetate 1:1) gave the title compound as a colourless oil that crystallised
on standing to give a white solid (456mg, 78%).
RF 0.36 (hexane-ethyl acetate 1:1);
m.p. 79.5 - 81 °C (Lit. 59 80 - 82.5°C);
5h (acetone - D6) 2.34 (1H, m, 6P-H), 2.82 (1H, m, 6a-H), 3.76 (3H, s, OMe), 4.12
(1H, dt, J = 7.5, 4.9 Hz, H-3), 4.75 (1H, t, 7 = 7.5 Hz, H-4), 5.33 (1H, dd, J= 7.5,
3.7 Hz, H-5), 6.87 (1H, m, H-2).
112
Attempted synthesis of Methyl [lR-(la,5a,6a)]-5-bromo-8-oxo-7,9-
dioxabicycIo[4.3.0]-non-2-ene-3-carboxyIate (206)
Method 1
A dry flask was charged with alcohol 93 (132mg, 0.62mmol) and tetrahydrofuran
(20ml). Carbon tetrabromide (407mg, 1.23mmol) was added, followed by
triphenylphosphine (324mg, 1.23mmol). The flask was flushed with nitrogen and the
reaction mixture was heated at reflux for 6 hours. T.l.c. analysis (mobile phase =
petrol/ ethyl acetate 1:1) indicated no conversion with starting material (93, R f =
0.51) remaining present.
Method 2
A dry flask was charged with alcohol 93 (600mg, 2.63mmol) and tetrahydofuran
(40ml). Carbon tetrabromide (980mg, 2.89mmol) was added, followed by
tributlyphosphine (586mg, 2.89mmol). The flask was flushed with nitrogen and
heated at reflux for three hours. T.l.c. analysis (mobile phase = petrol/ ethyl acetate
1:1) indicated no conversion with starting material (93, Rf = 0.51) remaining present.
Method 3
A solution of alcohol 93 (230mg, 1.3mmol) in tetrahydrofuran (2ml) was treated with
a solution of triphenyl phosphine (672mg, 2.6mmol) in tetrahydrofuran (1ml). A
solution of dibromotetrachloroethane (714mg, 2.6mmol) in tetrahydrofuran (2ml)
was added slowly with stirring After one hour t.l.c. analysis showed no conversion
and so the reaction mixture was heated under reflux for three hours. T.l.c. analysis
(mobile phase = petrol/ ethyl acetate 1:1) indicated no conversion with starting
material (93, R f = 0.51) remaining present.
113
Synthesis of Methyl 2-iodo-2-methyl-3-(toluene-/7-suIfonyl)propanoate (208)90
Iodine (10.19g, 40mmol) and /?-toluenesulfenic acid, sodium salt hydrate (17.02g,
80mmol) were added to a solution of methylmethacrylate (4g> 40mmol) in freshly
distilled methanol (75cm^). The reaction mixture was stirred at 25°C under an
atmosphere of nitrogen for 4 hours, after which time t.l.c. (petrol-ethyl acetate 4:1)
showed the reaction to be complete. The reaction was poured into distilled water
(750cm^) and extracted with ethyl acetate (2x500cm^). The extracts were combined
and treated with sodium thiosulphate solution (500cm^, 0.1M), dried (MgSC>4),
filtered and concentrated under reduced pressure. Column chromatography (petrol-
ethyl acetate 4:1) yielded the title compound as a yellow oil which crystallized on
cooling (11.15g, 73%). Prolonged exposure of 208 to light resulted in decomposition
to alkene 210.
208
RF 0.28 (petrol-ethyl acetate 4:1);
m.p. 131-134 °C (Lit.90 127-133°C);
Vmax (nujol) 1724 (C=0), 1315, 1280, 1141(SC>2) c n r1;
5 h (CDCI3) 2.44(3H, s, Me), 2.46(3H, s, Ar-Me), 3.80(3H, s, CC>2Me), 3.91(1H, d,
7 = 14 Hz, 1-H), 4.47(1H, d, 7 = 14 Hz, 1-H), 7.37(2H, d, 7 = 8 Hz, Ar-H), 7.77(2H,
d, 7 = 8 Hz, Ar-H);
8c (CDCI3) 28.1 (Me), 29.0(C-2), 30.1(C-3), 53.6(OMe), 69.0(C-1), 127.8(C-Ar),
130.1(C-Ar), 137.5(C-Ar), 145.2(C-Ar), 171.7(C=0).
114
210
RF 0.42 (petrol-ethyl acetate 4:1);
Vmax (nujol) 1685 (CC>2Me), 1280, 1295 (SO2), 1135 (SO2), 730 cm '1;
8h (CDCI3) 2.33 (3H, s, Me), 2.45 (3H, s, Ar-Me), 3.79 (3H, s, C02Me), 7.22 (1H,
s, l ’-H), 7.42 (2H, d, J = 7.9 Hz, Ar-H), 7.82 (2H, d, J= 7.9 Hz, Ar-H);
m/z (C.I.) 255 (MH+, 100%), 222 (9), 155 (5), 139 (2).
Synthesis of Methyl 2-((toluene-/>-sulfonyl)methyl) (210) 90,111
Iodine (6.35g, 25mmol) and /?-toluenesulfenic acid, sodium salt hydrate (10.70g,
50mmol) were added to a solution of methylmethacrylate (2.67g> 25mmol) in freshly
distilled methanol (125cm^). The reaction mixture was stirred at 25°C under an
atmosphere of nitrogen for 24 hours after which time t.l.c. (petrol-ethyl acetate 4:1)
showed the reaction to be complete. The reaction was poured into distilled water
(750cm^) and extracted with ethyl acetate (2x 500cm^). The extracts were combined
and treated with sodium thiosulphate solution (500cm^, 0.1M), dried (MgS04),
filtered and concentrated under reduced pressure. Column chromatography (petrol-
ethyl acetate 4:1) yielded the title compound as a yellow oil which crystallized on
cooling (3.74g, 55%).
Data as above.
115
Synthesis of Methyl 2-((toluene-/?-suIfonyl)methyl)propenoate (209) 90
Method 1
A solution of 210 (10.70g, 28mmol) in dichloromethane (65cm^) was treated with
triethylamine (3.14g, 31 mmol) and was heated at reflux under an atmosphere of
nitrogen for twenty hours. The mixture was then cooled and washed with 2M
hydrochloric acid (75ml), saturated aqueous sodium bicarbonate (50ml), and aqueous
sodium thiosulfate (0.5M, 50ml). The combined aqueous washings were back
extracted with dichloromethane (3x 30ml), washed with saturated brine (50ml), and
the combined organic phases dried (MgS04). The solvent was then evaporated under
reduced pressure to yield a yellow/ orange , viscous oil. Column chromatography
(petrol-ethyl acetate 4:1) yielded the title compound as a pale yellow oil (1.06g, 15%)
and alkene 210 as pale yellow crystals (4.26g, 60%).
209
RF 0.25 (petrol-ethyl acetate 4:1);
vmax (CHCI3) 1729 (CC>2Me), 1630, 1598,;
5H (CDCI3) 2.44 (3H, s, Ar-Me), 3.59(3H, s, C02Me), 4.15(2H, s, 1-H), 5.89(1H, s,
3-H), 6.50(1H, s, 3-H), 7.33(2H, d, J= 8 Hz, Ar-H), 7.72(2H, d, J= 8 Hz„ Ar-H);
8c (CDCI3) 21.6(Me), 52.3(OMe), 57.6(C-1), 127.8(C-Ar), 128.7(C-2), 128.9(C-
Ar), 129.6 (C-Ar), 133.4(C-3), 135.3(C-Ar), 144.9(C-Ar), 165.3(C=0);
m/z (C.I.) 255(MH+, 100).
210
Data as above
116
Method 2
A solution of 208 (10.70g, 28mmol) in dichloromethane (65cm^) was treated with
triethylamine (3.14g, 31mmol) and was heated at reflux under an atmosphere of
nitrogen for eight hours. The mixture was then cooled and washed with 2M
hydrochloric acid (75ml), saturated aqueous sodium bicarbonate (50ml), and aqueous
sodium thiosulfate (0.5M, 50ml). The combined aqueous washings were back
extracted with dichloromethane (3x 30ml), washed with saturated brine (50ml), and
the combined organic phases dried (MgS04). The solvent was then evaporated under
reduced pressure to yield a yellow/ orange , viscous oil. Column chromatography
(petrol-ethyl acetate 4:1) yielded the title compound as a pale yellow oil (5.62g,
79%):
Data as above.
Synthesis of Methyl 2-methylidene-3-tributylstannylpropionate (178)90
Method 1
A solution of 209 (150g, .59mmol) in dry toluene (30cm^) was stirred under an
atmosphere of nitrogen. To this was added tributyltin hydride (0.24cm^,0.89mmol)
A catalytic amount of AIBN was added. The reaction mixture was then heated to
reflux under a nitrogen atmosphere for 3 V2 hours then cooled and concentrated under
reduced pressure to yield a milky oil. Column chromatography (petrol-ethyl acetate
99:1 - 9:1) yielded the title compound as a clear , viscous oil which was storred under
refrigeration (120mg, 63%):
RF (petrol) 0.10;
Sh (CDCI3) 0.80-0.9l(12H,m, Bu-H), 1.08-1.36(9H, m, Bu-H), 1.39-1.56(6H,m,
Bu-H) 1.98(2H, s this peak shows tin isotopomer satellites , 1-H), 3.73(3H, s,
117
C0 2Me), 5.29(1H, s this peak shows tin isotopomer satellites , 3-H), 5.81(1H, s this
peak shows tin isotopomer satellites , 3-H);
5c (CDCI3) 13.5 (C-7), 9.7, 15.0, 27.3 and 28.6 (C-4, C-5, C-6 and C-l),
51.9(OMe), 118.8(C-3), 141.1(C-2), 168.5(C=0);
m/z (FAB(+)) 389 (MH+,15%), 333(52), 235 (43), 177 (100).
Method 2
A solution of 209 (255mg, 1.00 mmol) in degassed toluene (30cm^) was stirred under
an atmosphere of nitrogen. To this was added tributyltin hydride (0.41 cm^,
1.45mmol) A catalytic amount of tertiary butyl peroxide was added. The reaction
mixture was then heated to reflux under a nitrogen atmosphere for 1V2 hours then
cooled and concentrated under reduced pressure to yield a milky oil. Column
chromatography (petrol-ethyl acetate 99:1 - 9:1) yielded the title compound as a
clear, viscous oil (228mg, 70%).
Synthesis of Methyl 3a,4a-isopropylidenedioxy-5p-[2-methoxycarbonylprop-l-
en-3-yl]-cyclo-hex-l-ene-l-carboxylate (173)
Method 1
A solution of 5a-bromo compound 177 (132mg, 0.46mmol) in degassed toluene
(20cm^) was treated with the allylstannane 178 (371mg, 0.95mmol). A catalytic
amount of AIBN was added, and the reaction mixture was heated, slowly, to reflux
under an atmosphere of nitrogen. After six hours at reflux the mixture was cooled
gradually to room temperature and the solvents evaporated under reduced pressure.
118
Column chromatography (petrol-ethyl acetate 9:2 to 1:3) gave the title compound as a
viscous colourless oil (53mg, 39%) and 179 as a colourless oil (20mg, 15%).:
Combined yield of 173 and 179 = 54%
Ratio 5P -carba chain (173) - 5a -carba chain (179) = 2 .6:1
173
RF 0. 38(petrol-ethyl acetate 4:1);
vmax 1710 (C=0), 1630 (C=C);
8h (CDCI3) 1.39 (3H, s, Me), 1.44 (3H, s, Me), 1.92 (1H, dddd Jgem = 17.4, J6P-5
= 9.6, 1.75, Hz ,1.75, Hz H-6P), 2.20 (2H, m, 3'-H and 5-H), 2.64 (1H, dd, Jgem
=17.4, J 6a -5 = 3.0, 1.5 Hz, H-6a), 2.73 (1H, dd, Jgem =17.4, J y . 5 =8.8, 1.5 Hz, 3'-
H), 3.76 (3H, s, C02Me), 3.78 (3H, s, C02Me), 4.03 (1H, dd J 4,5 =7.5, J4 t3 =5.55
Hz, H-4), 4.58 (1H, m H-3), 5.57 (1H, d, J l ’,3' =1 Hz, l'-H), 6.25 (1H, d, J l ',3' =1
Hz, l'-H), 6,77 (1H, m, H-2);
8c (CDCI3) 25.8 (C-6), 26.1 (Me), 28.2 (Me), 33.8 (C-3’), 35.3 (C-5), 52.3 (OMe),
52.5 (OMe), 71.1 (C-4), 77.1 (C-3), 109.0 (CMe2), 127.1 (C -l’), 132.6 (C-l), 134.0
(C-2), 138.1 (C-2’), 167.1 (C=0), 167.4 (C=0);
m/z (E.I.) 310 (M+, 3).
179
RF 0.41 (hexane-ethyl acetate 4:1);
8h (CDCI3) 1.36 (3H, s, Me), 1.37 (3H, s, Me), 2.01 (1H, m, H-6P), 2.51 (1H, m,
H-6a), 2.63 (2H, s, 3'-H), 3.76 (3H, s, C02Me), 3.78 (3H, s, C0 2Me), 3.86 (1H, m,
119
H-5), 4.30 (1H, ddd J4,5 = 7.9, J 4,3 = 3.1, J4,2 = 2.2 Hz, H-4), 4.58 (1H, m H-3),
5.86 (1H, d, J \ \ y = 1 Hz, l'-H) 6.43 (1H, d, J \ \ y = 1 Hz, l'-H), 6,77 (1H, m, H-2);
6c (CDCI3) 25.0 (C-6), 26.4 (Me), 29.5 (Me), 32.0 (C-3’), 40.8 (C-5), 51.5 (OMe),
52.2 (OMe), 71.6 (C-4), 72.1 (C-3), 108.9 (CMe2), 124.7 (C-l*), 129.9 (C-l), 134.8
(C-2), 135.1 (C-2’), 167.1 (C=0), 167.3 (C=0);
Method 2
A solution of 5a-bromo compound 177 (37mg, 0.13mmol) in degassed toluene
(30cm^) was treated with the allylstannane 178 (lOOmg, 0.26mmol). A catalytic
amount of ^Bu-O-O-lBu was added, and the reaction mixture was heated, slowly, to
reflux under an atmosphere of nitrogen. After five hours at reflux the mixture was
cooled gradually to room temperature and the solvents evaporated under reduced
pressure. Column chromatography (petrol-ethyl acetate 9:2 to 1:3) gave the title
compound as a viscous colourless oil (16mg,40%), and 179 as a colourless oil (6mg,
15%).
Combined yield of 173 and 179 = 55%
Ratio 50 -carba chain (173) - 5a -carba chain (179) = 2.65:1
Method 3
A solution of 50-bromo compound 180 (190mg, 0.65mmol) in degassed toluene
(lOcnP) was treated with the allylstannane 178 (508mg, 1.3mmol). A catalytic
amount of AIBN (12mg) was added, and the reaction mixture was heated, slowly, to
reflux under an atmosphere of nitrogen. After three hours heating at reflux the
reaction mixture was cooled gradually to room temperature and the solvents
evaporated under reduced pressure. Column chromatography (hexane-ethyl acetate
120
4:1) gave the title compound as a viscous colourless oil (67mg, 33%), and 179 as a
colourless oil (25mg, 13%).
Combined yield of 173 and 179 = 46%
Ratio 5p -carba chain (173) - 5a -carba chain (179) = 73:27
Method 4
A solution of 5p-bromo compound 180 (171mg, 0.59mmol) in degassed toluene
(10cm^) was treated with the allylstannane 178 (459mg, 1.18mmol). A catalytic
amount of ACN (16mg) was added, and the reaction mixture was heated, slowly, to
110°C under an atmosphere of nitrogen. After two hours heating, the mixture was
cooled gradually to room temperature and the solvents evaporated under reduced
pressure. Column chromatography (hexane-ethyl acetate 9:1) gave the title
compound as a viscous colourless oil (88mg, 48%), and 179 as a colourless oil
(26mg, 14%).
Combined yield of 173 and 179 = 62%
Ratio 5p -carba chain (173) - 5a -carba chain (179) = 77:23
Synthesis of Methyl 3a,4a-isopropylidenedioxy-5P-phenylthionoformate-
cyclohex-l-ene-l-carboxylate (233)
Method 1
A solution of alcohol 86 (107mg, 0.47mmol) in tetrahydrofuran (10ml), under a
nitrogen atmosphere, was cooled to -78°C. Methyl lithium (1.4M, 10.33g,
0.47mmol) was added dropwise over a fifteen minute period. After stirring for
fifteen minutes at -78°C, O-phenylchlorothionoformate (97mg, 0.56mmol) was
added dropwise. The resulting reaction mixture was allowed to slowly warm to room
121
temperature over a forty five minute period. T.l.c. analysis (mobile phase = petrol/
ethyl acetate 4:1) indicated almost total conversion. The reaction mixture was then
stirred at room temperature for three hours. Column chromatography (Petrol-ether
7:3) yielded the title compound as a colourless oil that crystallized on standing
(61 mg, 35%)
RF 0.63 (petrol-ethyl acetate 4:1);
m.p. 122 - 124 °C;
vmax (nujol mull) 1722 (C02Me), 1507, 1289, 1245, 1191, 1152 cm"1;
8h (CDCl3)1.43 (3H, s, CCH3), 1.46 (3H, s, CCH3), 2.60 (1H, dddd, Jgem = 17,
J6p,5 =4.5, ^6P,2 =1.4, J6p,3 = 1.4 Hz H-6P), 2.98 (1H, dddd, Jgem 17, J6a,5 4.5
Hz H-6a), 3.80 (3H, s, C02Me), 4.45 (1H, t, H-5), 4.82 (1H, m, H-4), 5.67 (1H, q,
H-3), 6.96 (1H, d,m, H-2), 7.12 (2H, m, Ar-H), 7.29 (1H, m, Ar-H), 7.43 (2H, m, Ar
il):
8c (CDCI3) 25.6 (C-6), 26.0 (Me), 27.8 (Me), 52.2 (OMe), 71.9 (C-5), 73.4 (C-4),
79.7 (C-3), 110.2 (CMe2), 115.3 (C-(Ar-H)), 121.8 (C-(Ar-H)), 126.6 (C-(Ar-H)),
129.1 (C-l), 129.5 (2xC-(Ar-H)), 134.4 (C-2), 153.3 (Ar-1), 166.2 (C=0), 194.3
(O S ):
m/z 365 (MH+,12%), 307 (20), 211 (18), 153 (100):
(Found: C, 59.7; H, 5.52 C18H20O6S requires C, 59.33 ; H, 5.53 .%).
Method 2
To a stirred solution of 86 (140mg, 0.6mmol) in dichloromethane (10 cm^) under an
atmosphere of nitrogen, was cooled to 0°C. Pyridine (58.5mg, 0.74mmol) was added
and then O-phenylchlorothionoformate (128mg, 0.74mmol) was added dropwise. The
122
reaction mixture was kept at 0°C for thirty minutes and was then allowed to warm to
room temperature over thirty minutes and was then stirred for three hours. The
solvent was removed under reduced pressure to give a dark brown oil. Column
chromatography (petrol-ethyl acetate 4:1) yielded the compound as a colourless oil
that crystallized on standing (133mg 59%).
Synthesis of Methyl 3a,4a-isopropyIidenedioxy-5p-/>-tolylthionoformate-
cyclohex-l-ene-l-carboxylate (236)
To a stirred solution of 86 (2.1g 9.2mmol) in dichloromethane (30 cm^) under an
atmosphere of nitrogen, was added pyridine (1.46g 18.4mmol) and p-
tolylchlorothionoformate (3.43g 18.4mmol). After two hours the solvent was
removed under reduced pressure to give a dark brown oil. Column chromatography
(Petrol-ether 7:3) yielded the title compound as a colourless oil that crystallized on
standing (2.96g 85%):
RF 0.5 8(petrol-ethylacetate 4:1);
m.p. 118-119.5 °C;
Vmax (nujol mull) 1709 (C02Me), 1514, 1293, 1245 cm"l;
5h (CDCl3)1.43 (3H, s, CCH3), 1.45 (3H, s, CCH3), 2.36 (3H, s, Ar-CH3), 2.58
(1H, dd, > 13 , > 8, > 8 Hz, H-6P), 2.94 (1H, dd, > 1 1 , > 8, > 8 Hz, H-6a), 3.78
(3H, s, C02Me), 4.45(1H, t, >6 .5 , > 6 .5 Hz H-5), 4.82(1H, dt, H-4), 5.68(1H, m,
H-3), 6.74(1H, d,m, H-2), 6.96(2H, m, Ar-H), 7.19(2H, m, Ar-H):
6c (CDCI3) 20.9 (Ar-Me), 25.6 (C-6), 26.0 (Me), 27.8 (Me), 52.2 (OMe), 71.9 (C-
5), 73.3 (C-4), 79.6 (C-3), 110.3 (CMe2), 115.0 (C-(Ar-H)), 120.6 (C-(Ar-H)), 121.4
123
(C-(Ar-H)), 129.1 (C-l), 130.1 (C-(Ar-H)), 134.4 (C-2), 136.4 (Ar-4), 151.2 (Ar-1),
166.3 (C=0), 194.6 (C=S):
m/z (E.I.) 378(M+,10%):
(Found: C, 60.47; H, 5.9 C19H22O6S requires C, 60.3 ; H, 5.82 .%).
Attempted synthesis of Methyl 3a,4a-isopropyIidenedioxy-5|3-trichlorophenyl-
thionoformate-cyclohex-l-ene-l-carboxylate (237)
A solution of alcohol 86 (538mg, 2.46mmol) in dichloromethane (5ml) was treated
with triethylamine (0.5ml, 3.94mmol) and the reaction mixture stirred under an
atmosphere of nitrogen. 0-2,4,6-Trichlorophenylchlorothionoformate (lg,
3.53mmol) was added dropwise and the reaction was stirred at room temperature for
two hours. T.l.c. analysis (mobile phase = petrol/ ethyl acetate 1:1) indicated no
conversion with starting material (86, Rf = 0.51) remaining present. The solvent was
removed under reduced pressure and toluene (8ml) was added along with N-hydroxy
succinimide (9mg, cat.) and the reaction was heated at 80°C for three hours. T.l.c.
analysis (mobile phase = petrol/ ethyl acetate 1:1) indicated no conversion with
starting material (86, Rf = 0.51) remaining present.
Attempted synthesis of Methyl 3a,4a-isopropyIidene-dioxy-5p-pentafIuoro-
phenylthionoformate-cyclohex-l-ene-l-carboxylate (238)
A solution of alcohol 86 (310mg, 1.36mmol) in toluene (10ml) was treated with N-
hydroxy succinimide (16mg, 0.14mmol) and the reaction mixture stirred under an
124
atmosphere of nitrogen. Pyridine (0.11ml, 1.36mmol) and pentafluorophenylchloro-
thionoformate (536mg, 2.05mmol) were then added in sequence and the reaction
mixture was heated at 80°C for 6 hours. T.l.c. analysis (mobile phase = petrol/ ethyl
acetate 1:1) indicated no conversion with starting material (86, R f = 0.51) remaining
present.
Synthesis of Methyl 3a,4a-isopropyIidenedioxy-5p-S-methyldithiocarbonyI-
cyclohex-l-ene-l-carboxylate (239)
A solution of alcohol 86 (150mg, 0.66mmol) in tetrahydrofuran (7ml) was treated
with a solution of sodium hydride (29mg, mmol) and imidazole (7mg, mmol) in
tetrahydrofuran (3ml). The reaction micture was stirred under an atmosphere of
nitrogen for two hours and was then treated with carbon disulfide (0.08ml, mmol)
dropwise over fifteen minutes. Methyl iodide (0.07ml, mmol) was then added
dropwise over fifteen minutes and the reaction mixture stirred for a further thirty
minutes. The reaction was quenched with water (10ml), dichloromethane (20ml) was
added and the reaction mixture stirred vigorously for 10 minutes. The reaction
mixture was then extracted with dichloromethane (3x15ml), dried (MgS04) and
concentrated under reduced pressure. Column chromatography (petrol-ethyl acetate
4:1 to 2:3) afforded the title compound as a colourless oil that crystallised to give
colourless prisms after being refridgerated (136mg, 64%).
RF 0.58 (petrol-ethyl acetate 1:1);
m.p. 104 - 105 °C;
8h (CDCI3) 1.41 (3H, s, Me), 1.42 (3H, s, Me), 2.52 (4H, m, SMe, 60-H), 2.91 (1H,
dddd, JgQm 17.5, ./6a ,5 6.0, ./6a ,2 1-0 -/6a ,3 1 0 Hz, 6a-H), 3.79 (3H, s, C02Me),
125
4.41 (1H, t, /5 ,6a = 6, 7 = 6 Hz, H-5), 4.80 (1H, m, H-3), 6.02 (1H, m, H-4), 6.94
(1H, m, H-2);
8c (CDCI3) 19.2 (SMe), 25.7 (C-6), 26.0 (Me), 27.8 (Me), 52.1 (OMe), 71.8 (C-5),
73.2 (C-4), 78.2 (C-3), 110.1 (CMe2), 129.0 (C-l), 134.3 (C-2), 166.2 (C=0), 215.3
(C=S);
m/z (C. I.) 319 (MH+, 18%), 153 (100);
(Found: C 49.5 H 5.92 C13H18O5S2 requires C 49.05 H 5.70 %).
Attempted synthesis of methyl 3a,4a-isopropylidenedioxy-5p-[2-
methoxycarbonylprop-l-en-3-yl]-cyclo-hex-l-ene-l-carboxyIate (173)
Method 1
A solution of thionocarbonate 233 (227mg, 0.62mmol) in toluene (10ml) was treated
with allylstannane 178 (485mg, 1.25mmol). A catalytic amount of AIBN (lOmg)
was added, and the reaction mixture was heated at 80°C under an atmosphere of
nitrogen. After four hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1)
indicated no conversion with starting material (233, Rf = 0.63) remaining present.
Another quotient of AIBN (lOmg) was then added and the reaction mixture was
heated at 80°C for a further fifteen hours. Still no product had been formed and so
the reaction mixture was then boiled for five hours but t.l.c. analysis (mobile phase =
petrol/ ethyl acetate 4:1) indicated no conversion with starting material (233, Rf =
0.63) remaining present.
126
Method 2
A solution of thionocarbonate 233 (167mg, 0.46mmol) in benzene (15ml) was treated
with allylstannane 178 (357mg, 0.92mmol). A catalytic amount of AIBN (lOmg)
was added, and the reaction mixture was heated at 80°C under an atmosphere of
nitrogen. After four hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1)
indicated no conversion with starting material (233, Rf = 0.63) remaining present.
Method 3
A solution of thionocarbonate 236 (mg, mmol) in benzene (ml) was treated with
allylstannane 178 (mg, mmol), A catalytic amount of AIBN ( mg) was added, and
the reaction mixture was heated at 80°C under an atmosphere of nitrogen. After
three hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated no
conversion with starting material (236, Rf = 0.58) remaining present.
Method 4
A solution of thionocarbonate 236 (150mg, 0.39mmol) in toluene (10ml) was treated
with allylstannane 178 (309mg, 0.79mmol). A catalytic amount of AIBN (15mg)
was added, and the reaction mixture was heated at reflux under an atmosphere of
nitrogen. After fifteen hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1)
indicated no conversion with starting material (236, Rf = 0.58) remaining present.
127
Method 5
A solution of thionocarbonate 233 (98mg, 0.27mmol) in toluene (12ml) was treated
with allylstannane 178 (212mg, 0.54mmol). A catalytic amount of ^u-O-O-^Bu
(8mg) was added, and the reaction mixture was heated at reflux under an atmosphere
of nitrogen. After seven hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate
4:1) indicated no conversion with starting material (233, Rf = 0.63) remaining
present.
Method 6
A solution of thionocarbonate 236 (68mg, 0.18mmol) in toluene (5ml) was treated
with allylstannane 178 (140mg, 0.36mmol). A catalytic amount of ^Bu-O-O-^Bu
(5mg) was added, and the reaction mixture was heated at reflux under an atmosphere
of nitrogen. After twelve hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate
4:1) indicated no product with starting material (236, R f = 0.58) remaining present.
Method 7
A solution of thionocarbonate 233 (112mg, 0.31mmol) in toluene (ml) was treated
with allylstannane 178 (239mg, 0.61mmol). A catalytic amount of ACN (4mg) was
added, and the reaction mixture was heated at reflux under an atmosphere of nitrogen.
After nine hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated no
conversion with starting material (233, Rf = 0.63) remaining present.
128
Method 8
A solution of thionocarbonate 236 (235mg, 0.62mmol) in toluene (ml) was treated
with allylstannane 178 (484mg, 1.24mmol). A catalytic amount of ACN (5mg) was
added, and the reaction mixture was heated at reflux under an atmosphere of nitrogen.
After nine hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated no
product with starting material (236, Rf = 0.58) remaining present.
Method 9
A solution of thionocarbonate 236 (266mg, 0.70mmol) in benzene (10ml) was placed
in Hanovia photolysis apparatus along with allylstannane 178 (547mg, 1.41mmol).
After thoroughly degassing the solution with nitrogen, it was irradiated at 20°C with
a 400-W medium pressure mercury lamp with pyrex filter. After four hours t.l.c.
analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated that most of the starting
material had reacted to produce at least twenty different close running spots, but none
of these spots co-incided with those attributable to the desired products. The reaction
was continued for another three hours but t.l.c. analysis (mobile phase = petrol/ ethyl
acetate 4:1) indicated that even more products had been formed with some of the
starting material (236, Rf = 0.58) remaining present.
Method 10
A solution of thionocarbonate 233 (72mg, 0.20mmol) in benzene (9ml) was placed in
Hanovia photolysis apparatus along with allylstannane 178 (154mg, 0.40mmol).
After thoroughly degassing the solution with nitrogen, it was irradiated at 20°C with
a 400-W medium pressure mercury lamp with pyrex filter. After one hour t.l.c.
129
analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated that most of the starting
material had reacted to produce at least nine different close running spots, none of
which co-incided with those attributable to the desired products. The reaction was
continued for another two hours but t.l.c. analysis (mobile phase = petrol/ ethyl
acetate 4:1) indicated that even more products had been formed with some of the
starting material (233, Rp = 0.61) remaining present.
Method 11
A solution of xanthate 239 (83mg, 0.26mmol) in toluene (10ml) was treated with
allylstannane 178 (203mg, 0.52mmol). A catalytic amount of ACN (lOmg) was
added, and the reaction mixture was heated at reflux under an atmosphere of nitrogen.
After two hours t.l.c. analysis (mobile phase = petrol/ ethyl acetate 4:1) indicated no
product with starting material remaining present.
Synthesis of Methyl 3a,4a-isopropylidenedioxy-5(3-methanesufonyIoxy-
cyclohex-l-ene-l-carboxylate (240)
Method 1
A solution of 86 (750mg, 3.3mmol) in dichloromethane (8ml) was treated with
pyridine (7.5ml) and cooled to O^C. Methanesulfonyl chloride (942mg, 8.2mmol)
was added dropwise over a period of ten minutes under an atmosphere of nitrogen.
The reaction mixture was then allowed to warm slowly to room temperature and was
stirred for three and a half hours. Crushed ice was added, the organic layer was
extracted with ether (3x40ml), dried (MgS04 ), filtered and removed under reduced
pressure to afford a colourless solid. Column chromatography (hexane- ethylacetate
1:1) afforded the title compound as a colourless oil, that was crystallised from
chloroform, (684mg, 68%).
RF 0.52 (hexane-ethyl acetate 1:1);
130
m.p. 138-140 °C;
Vmax 1720 cm"l;
5h (CDCI3) 1.41 (3H, s, Me), 1.49 (3H, s, Me), 2.51 (1H, dddd, Jgem =17.5, Jep,5
=8, Jfcp,2 =15 76p,3 =1 5 Hz, 6p-H), 3.0 (1H, dd, Jgem =17.5, J6a ,5 =5 Hz 6a-H),
3.23 (3H, s, S02Me), 3.79 (3H, s, CC>2Me), 4.28 (1H, dd, 75,6P =8, ^5,4 =6 Hz, H-
5), 4.8 (2H, m, H-3, H-4), 6.97 (1H, m, H-2);
6c (CDCI3) 25.7 (Me), 27.5 (Me), 27.7 (C-6), 37.9 (OMe), 71.7 (C-5), 73.9 (C-4),
109.5 (CMe2), 129.0 (C-l), 134.1 (C-2), 165.6 (C=0);
m/z 307 (MH+, 27%), 291 (15), 249 (100).
Method 2
A solution of 86 (2.55g, 11.2mmol) in pyridine (10ml) was cooled to 0^C.
Methanesulfonyl chloride (2.2ml) was added dropwise over a period of ten minutes
under an atmosphere of nitrogen. The reaction was then allowed to warm slowly to
room temperature and was stirred for seventeen hours. Crushed ice was added, the
organic layer was extracted with ether (3x30ml), dried (MgSC>4), filtered and
removed under reduced pressure to afford a colourless oil. Column chromatography
(hexane- ethylacetate 1:1) afforded the title compound as a colourless oil (2.72g,
80%).
Method 3
A solution of 86 (3.19g, 14mmol) in dichloromethane (7.5ml) and tetrahydrofuran
(7.5ml) was treated with triethylamine (5ml) and cooled to 0^C. Methanesulfonyl
chloride (mg, 35mmol) was added dropwise under an atmosphere of nitrogen, and the
131
reaction was stirred for ten minutes. Crushed ice was added, the organic layer was
extracted with dichloromethane (3x30ml), dried (MgSC>4), filtered and removed
under reduced pressure. Column chromatography (hexane- ethylacetate 1:1) afforded
the title compound 240 as a colourless oil (4.20g, 98%).
Synthesis of Methyl 3a,4a-hydroxy-5p-methanesufonyIoxy-cyclohex-l-ene-l-
carboxylate (241)
Method 1
A solution of 240 (750mg, 2.45mmol) in tetrahydrofuran (2ml) was treated with
water (2ml) and glacial acetic acid (2ml). The reaction mixture was heated to 60^C
for thirty eight hours. Saturated aqueous sodium bicarbonate solution (10ml) was
added and the reaction mixture was extracted with ethyl acetate (2x15 ml). The
combined washings were dried (MgSC>4), filtered and concentrated under reduced
pressure to give a yellow solid. Column chromatography (ethyl acetate) afforded the
title compound as a colourless solid (515mg, 79%).
RF 0.72 (ethyl acetate );
m.p. 136 - 137 °C;
5h (CDCI3) 2.36 (1H, dd, Jgem = 18, J= 6 Hz, 6P-H), (1H, dd, Jgem = ,18 J = 3.5
Hz, 6a-H), 3.20 (3H, s, S02Me), 3.65 (3H, s, CC>2Me), 3.89 (1H, dd, H-5), 4.22(1H,
s, H-3), 4.80 (1H, q, H-4), 5.30 (2H, dd, 2x OH, exchange with D2O), 6.71 (1H, s,
H-2);
6c (CDCI3) 29.5 (C-6), 33.8 (SMe), 53.2 (OMe), 66.4 (C-5), 69.0 (C-4), 78.1 (C-3),
128.0 (C-l), 139.6 (C-2), 167.4 (C=0);
m/z (C.I.) 267 (MH+, 17), 249 (72), 217 (43), 171 (6), 153 (100).
132
Method 2
A solution of 240 (627mg, 2.05mmol) in tetrahydrofuran (3ml) was treated with IN
hydrochloric acid (8ml). The reaction mixture was heated to 50^C for two and half
hours. Saturated aqueous sodium bicarbonate solution (15ml) was added and the
reaction mixture was extracted with ethyl acetate (2x 10ml). The combined washings
were dried (MgS04), filtered and concentrated under reduced pressure to give a
yellow solid. Column chromatography (ethyl acetate) afforded the title compound as
a colourless solid (280mg, 52%).
Method 3
A solution of 240 (820mg, 2.68mmol) in tetrahydrofuran (6ml) was treated with IN
hydrochloric acid (6ml). The reaction mixture was stirred at room temperature for
two and half hours. Saturated aqueous sodium bicarbonate solution (20ml) was
added and the reaction mixture was extracted with ethyl acetate (2x10 ml). The
combined washings were dried (MgS04), filtered and concentrated under reduced
pressure to give a yellow solid. Column chromatography (ethyl acetate) afforded the
title compound as a colourless solid (579mg, 81%).
Synthesis of Methyl c«-3-hydroxy-4,5-oxycyclohex-l-ene-l-carboxyIate
(120)59,136
Method 1
To a solution of triphenylphosphine (302mg, 1.15mmol) and THF (50 cm^) was
added 86 (119mg, 0.58mmol). This was flushed with nitrogen and then cooled to
0°C, DEAD (201 mg, 1.15mmol) was then added dropwise with stirring. The mixture
was kept at 0°C for 30 minutes after which it was allowed to warm to room
133
temperature where it stood for 2 hours. The mixture was then concentrated under
pressure to give an orange oil that solidified on standing. This was taken up in hot
ether, which when cooled gave bis(carboethoxy)hydrazine (190mg ). The filtrate was
concentrated and after column chromatography (petrol- ethylacetate 4:1) gave the
titled product (24mg, 27%) as a pale yellow oil that crystallized on cooling;
RF 0.45 (hexane-ethyl acetate 1:1);
Vmax (nujol) 3550, 3450, 1715, 1655 cm"l;
5h (CDCI3) 2.44(1H, m, J = 21.2 Hz, H-6p), 2.60(1H, d, , J = 11.1 Hz, OH,
exchanges with D2O), 3.0( 1H, m, .7=21.2 Hz, H-6a), 3.52( 2H, br s, H-4), 3.75(
3H,s, OCH3), 4.55(1 H,m, .7=11.1 Hz, H-3), 6.72(1 H, br s, H-2),
bis(carboethoxy)hydrazine
mp 132°C;
6H (CDCI3) 1.28 (6H, t, J= 7.2 Hz, C02Et), 4.20 (4H, q, J = 12 Hz, C02Et), 6.70
(2H, s, 2x NH).
Method 2
To a solution of triphenylphosphine (557mg, 2.12mmol) and THF (50 cm^) was
added 86 (220mg, 1.06mmol). This was flushed with nitrogen and then cooled to
0°C, DEAD (370mg, 2.12mmol) was then added dropwise with stirring. The mixture
was kept at 0°C for 30 minutes after which it was allowed to warm to room
temperature where it stood for 2 hours. The mixture was then concentrated under
pressure to give an orange oil that solidified on standing. The residue was then
distilled using a Kugelrohr apparatus. Material distilling up to 130^C at a pressure of
134
0.5mm was collected and this was diluted with hot diethyl ether (45ml), which caused
N,N-bis(ethoxycarbonyl)hydrazine (190mg) to precipitate. The filtrate was
concentrated and after column chromatography (petrol- ethylacetate 4:1) gave the
titled product (77mg, 36%) as a pale yellow oil that crystallized on cooling.
Synthesis of Methyl cis-3-hydroxy-4,5-oxycycIohex-l-ene-l-carboxyIate (120)
from Methyl 3a,4a-hydroxy-5P-methanesufonyloxy-cyclohex-l-ene-l-
carboxylate (241)
Method 1
A solution of 241 (300mg, 1.13mmol) in tetrahydrofuran (5ml) was treated with
potassium tertiary butoxide (140mg, 1.24mmol) and the reaction was stirred under an
atmosphere of nitrogen for five hours. Column chromatography (ethyl acetate ) gave
the title compound as a white crystalline solid (84mg, 43%).
Data as above
Method 2
A solution of 241 (150mg, 0.56mmol) in tetrahydrofuran (8ml), was cooled to 0°C
and was treated with potassium tertiary butoxide (70mg, 0.62mmol). The reaction
was allowed to warm slowly to room temperature, under an atmosphere of nitrogen,
over a three hour period. Concentration under reduced pressure gave a white solid .
Column chromatography (ethyl acetate ) gave the title compound as a white
crystalline solid (50mg, 52%).
135
Method 3
A solution of 241 (221mg, 0.83mmol) in tetrahydrofuran (14ml), was cooled to -
78°C and was treated with potassium tertiary butoxide (102mg, 0.91mmol). The
reaction was stirred under an atmosphere of nitrogen for 2 hours and allowed to
warm slowly to room temperature. Concentration under reduced pressure gave a
white solid. Column chromatography (ethyl acetate ) gave the title compound as a
white crystalline solid (134mg, 95%).
Synthesis of Methyl 3a,4a-hydroxy-5p-bromocyclohex-l-ene-l-carboxylate
(165)
A solution of 120 ( 900mg, 5.29mmol) in tetrahydrofuran (25ml) was treated with
glacial acetic acid (mg, 31.76mmol). Lithium bromide (736mg, 8.46mmol) was then
added and the reaction was stirred under an atmosphere of nitrogen for 5 hours.
Sodium bicarbonate (mg, mmol) was added and the organic layer was extracted with
ethylacetate (3 x 20ml). The organic washings were dried (Na2SC>4), filtered, and
then the solvent was removed under reduced pressure to give a colourless crystalline
solid in 97% yield. Column chromatography (hexane-ethyl acetate 1:1) afforded the
title compound (1.04g, 78%).
m.p.92 - 94 °C;
vmax (nujol mull) 3315(OH), 1690(C=O), 1630(C=C) cm '1;
8h (CDCI3) 2.78 (1H, dddd, Jgem =18.5, J 6p,5 =8.5, 76p,2 =1.5 J 6p,3 =1 5 Hz, 60-
H), 2.97 (1H, br s, OH, exchanges with D2O), 3.09 (1H, br s, OH, exchanges with
D2O), (1H, dddd, Jgftm =18.5, J 6a ,5 =5, J6a ,2 =1.5 76a,3 =1 5 Hz, 6a-H), 3.78
136
(3H, s, C02Me), 3.94 (1H, dd, Js,6 $= 8.5 , ./= 4 Hz, H-5), 4.38 (1H, m, H-4), 4.62
(1H, br s , H-3), 6.91 (1H, m, H-2);
8c (DMSO) 31.7 (C-6), 50.1 (C-5), 51.9 (OMe), 65 (C-4), 69.9 (C-3), 127.4 (C-l),
139.1 (C-2), 165.9 (C=0);
m/z (C.I.) 253(M+ 97 (Br81)), 251(M+ 100 (Br79)), 235 (98), 233 (100), 173 (6),
171 (14), 153 (100), 139 (22), 137 (34);
(Found: C, 38.6; H, 4.54 C8Hi i04Br requires C, 38.4 ; H, 4.43 .%).
Synthesis of Methyl 3a,4a-hydroxy-5p-iodocycIohex-l-ene-l-carboxyIate (242)
A solution of 120 (498mg, 2.92mmol) in tetrahydrofuran (10ml) was treated with
glacial acetic acid (0.54ml, 8.79mmol). Lithium iodide (599mg, 4.69mmol) was then
added and the reaction was excluded from the light. The reaction was stirred under
an atmosphere of nitrogen for eighteen hours. Sodium bicarbonate (72mg) was added
and the organic layer was extracted with ethyl acetate (3 x 20ml). The organic
washings were washed with sodium thiosulfate (15ml), dried (Na2SC>4), filtered, and
then the solvent was removed under reduced pressure. Column chromatography
(hexane-ethyl acetate 1:1) afforded the title compound as a colourless crystalline solid
(739mg, 85%).
m.p.134 - 136 °C;
vmax (nujol mull) 3337(OH), 1705(C=O), 1640(C=C) cm '1;
Sh (CDCI3) 2.58 (1H, br s, OH, exchanges with D2O), 2.75 (1H, br s, OH,
exchanges with D2O), 2.94 ( H, dd, Jgem = 18.5, J= 8.5, Hz, 60-H), 3.32 (1H, dd,
137
Jgem = 18.5, 7= 4.5, Hz, 6<x-H), 3.75 (3H, s, C02Me), 3.93 (1H, dd, 7 5,6p= 8.5,7 =
4 Hz, H-5), 4.45 (1H, m, H-4), 4.58 (1H, m, H-3), 6.93 (1H, m, H-2);
8c (CD3OD) 34.2 (C-6), 48.4 (C-5), 50.3 (OMe), 71.1 (C-4), 75.5 (C-3), 130.1 (C-
1), 140.1 (C-2), 168.4 (C=0);
m/z (FAB-) 297(M", 24), 279 (14), 170 (32);
(Found: C, 31.9; H, 3.75 C8H11O4I requires C, 32.22 ; H, 3.72 .%).
Synthesis of Methyl 3a,4a-isopropylidenedioxy-5f3-bromocyclohex-l-ene-l-
carboxylate (180)
A solution of 165 (495mg, 1.97mmol) in 2,2-dimethoxy propane (2.05g,
19.72mmol), was treated with a catalytic amount of p-toluenesulfonic acid
monohydrate and the reaction stirred under an atmosphere of nitrogen at room
temperature for forty five minutes. The solution was neutralized with saturated
sodium bicarbonate, extracted with diethyl ether (3x30 ml), dried (MgSC>4), filtered
and the solvent evaporated under reduced pressure. Column chromatography (petrol-
ethyl acetate 1:1) gave the title compound 180 as a colourless solid (488mg, 85%).
8h (CDCI3) 1.39 (3H, s, Me), 1.40 (3H, s, Me), 2.78 (1H, dddd, 7gem = 18.0, 76p,5=
7.0, 76(3,2=1, 76P,5=l, 6P-H), 3.40 (1H, ddd, Jgear 18.0, ./6a ,5= 4.0, J6a,2= 1-5
Hz, 6a-H), 3.79 (3H, s, C02Me), 4.30 (1H, br dd, 75,6p=7.0, J5,6a=4.0 Hz, H-5),
4.45 (1H, dd, 7^5= 6.0,74,3= 5.5 Hz, H-4), 4.78 (1H, s, H-3), 6.92 (1H, m, H-2);
8c (CDCI3) 26.4 (Me), 28.2 (Me), 30.1 (C-6), 46.8 (C-5), 52.4 (OMe), 72.1 (C-4),
76.9 (C-3), 110.7 (CMe2), 129.9 (C-l), 134.6 (C-2), 166.4 (C=0);
138
m/z (C.I.) 292 (M+ 57 (Br81)), 290(M+ 59 (Br79)), 277 (39), 275 (40), 235 (52), 233
(50), 153 (100), 137 (59).
Attempted synthesis of Methyl 3a,4a-isopropylidenedioxy-5p-iodocyclohex-l-
ene-l-carboxylate (244)
A solution of 242 (123mg, 0.41mmol) in 2,2-dimethoxy propane (425mg,
4.13mmol), was treated with a catalytic amount of /?-toluenesulfonic acid
monohydrate and the reaction stirred under an atmosphere of nitrogen at room
temperature for forty five minutes. The solution was neutralized with saturated
sodium bicarbonate, extracted with diethyl ether (3x30 ml), dried (MgS04), filtered
and the solvent evaporated under reduced pressure. Column chromatography (petrol-
ethyl acetate 4:1) gave the title compound as a colourless solid (95g, 68%) which
underwent rapid decomposition to give a dark brown oil.
Synthesis of Methyl 3a,4a-hydroxy-5p-[2-methoxycarbonyIprop-l-en-3-87
yI]cyclohex-l-ene-l-carboxyIate (246)
Method 1
A solution of the acetonide 173 (200mg, 0.65mmol) in THF (3ml) was treated with
glacial acetic acid (4ml) and water (3ml), and was heated to 50-60°C under an
atmosphere of nitrogen for 35 hours. The reaction mixture was poured into a
saturated aqueous sodium bicarbonate solution (7ml) and extracted with
dichloromethane (2x 5ml). The combined extracts were dried (Na2SC>4), filtered and
concentrated under reduced pressure. Column chromatography (petrol-ethylacetate
139
1:1) yielded the title compound as a colourless solid (60mg, 38%) and the lactone 175
as a colourless solid (25mg, 15%).
87246
Rp 0.40 (petrol-ethyl acetate 1:3);
m.p. 119-120 °C;
v max 3200 (OH), 1720 (C02Me), 1620 (C=C);
Sh (CDCI3) 1.94 (1H, dddd, Jgem = 18.0, J6p,5 = 9.5, J6p,2 = 2.0 J6p,3 =1.5 Hz,
6P-H), 2.20 (3H, br s, H-5, 3-OH, 4-OH), 2.31 (1H, dd, Jgem = 14.0, J s ’,5 = 8.5 Hz,
H-3’), 2.54 (1H, dd, Jgem 18.0, 5.0 Hz, 6a-H), 2.75 ( 1H, ddd, Jgem = 14.0,
J3’,5 = 4.0, J y ty = 1.0 Hz, 3’-H), 3.47 (1H, dd, J ^ s = 10.0 , J4,3 = 4.0 Hz, H-4),
3.74 (3H, s, OMe), 3.77 (3H, s, OMe), 4.35 (1H, dd, J3,2 = 5, J 3 t4 = 4.0 Hz, H-3),
5.67 (1H, d, J i ’,3’ = 1.0 Hz, l ’-H), 6.29 (1H, d, J i’,3’ = 1.0 Hz, l ’-H), 6.93 (1H,
ddd, J2,3 = 5.0, J2,6p = 2 .0, J2,6a = 1.0 Hz, H-2);
8c (CDCI3) 28.5 (C-6), 33.5 (C-3’), 34.5 (C-5), 52.0 (OMe), 52.3 (OMe), 65.9 (C-
4), 71.7 (C-3), 128.2 (C-l’), 132.6 (C-l), 135.9 (C-2), 137.7 (C-2’), 167.1 (C=0),
168.2 (C=0);
m/z (C.I., NH3) 288(MNH4+, 73), 271 (MH+19), 253 (100);
(Found: C, 57.55; H, 6.49 C13H 18O6 requires C, 57.75 ; H, 6.72 .%).
7'ran.«-8a-llydroxy-6-methoxy-carbonyI-3-methylene-4a,5?8,8a-tctral)ydro-4H-
benzo[e]pyran-2-one (175)
RF 0.49 (petrol-ethyl acetate 1:3);
m.p. 131-133 °C;
140
v max (nujol mull) 3480, 3380, 1690, 1610, cm"l;
8h (CDCI3) 2.0 (2H, br dddd, 7gem = 18.0, 76p,5 = 9.0, 76p,2 =3.0 76p,3 =1-0 Hz,
6p-H and OH), 2.28 (2H, m, H-5 and H-3), 2.83 (2H, m, 6a-H and H-3’), 3.78 (3H,
s, C02Me), 4.23 (1H, dd, 74,5 = 10.5,74,3 =3.0 Hz, H-4), 4.50 (1H, dd, 73,2 = 6.0,
73,4 =3.0 Hz, H-3), 5.68 (1H, s, H -l’), 6.49 (1H, s, H -l’), 6.95 (1H, dd, 72.3 = 6.0,
72,6P=3.0 H z , H-2);
Sc (CDCI3) 27.8 (C-5), 30.7 (C-6), 34.3 (C-3’), 52.2 (OMe), 63.5 (C-4), 82.3 (C-3),
129.0 (C-l’), 133.0 (C-l), 133.1 (C-2’), 134.2 (C-2), 164.8 (C=0), 166.5 (C=0);
m/z (E.I.) 238(MH+, 13), 223 (8), 206 (10);
m/z (FAB+) 239 (MH+, 239.091949 C12 H15O5 required 239.091053 , 100%).
Method 2
A solution of 173 (76mg, 0.25mmol) in tetrahydrofuran (15ml) was treated with IN
hydrochloric acid (15ml). The reaction mixture was stirred at room temperature for
four hours. Saturated aqueous sodium bicarbonate solution (20ml) was added and the
reaction mixture was extracted with ethyl acetate (2x 10ml). The combined washings
were dried (MgSC>4), filtered and concentrated under reduced pressure. Column
chromatography (hexane/ethyl acetate 1:1) afforded the title compound as a
colourless solid (27mg, 46%) and the lactone 175 as a colourless solid (13mg, 21%).
141
Synthesis of 7>a«s-8a-Hydroxy-6-methoxy-carbonyl-3-methylene-4a,5,8,8a-
tetrahydro-4H-benzo[e]pyran-2-one (175)
Method 1
A solution of the acetonide 173 (31 mg, 0.097mmol) in THF (1ml) was treated with
glacial acetic acid (1 ml) and water (1ml), and was heated to 60°C under an
atmosphere of nitrogen for 47 hours. The reaction mixture was poured into a
saturated aqueous sodium bicarbonate solution (5ml) and extracted with
dichloromethane (2x 5ml). The combined extracts were dried (Na2SC>4), filtered and
concentrated under reduced pressure. Column chromatography (petrol-ethylacetate
1:1) yielded the title compound as a colourless solid (6mg, 30%) and diol 246 as a
colourless solid (14mg, 52%).
DATA as above.
Method 2
A solution of the diol 246 (37mg, 0.14mmol) in MeCN (3ml) was treated with
potassium carbonate(2mg, 0.007mmol) and was heated to 50°C under an atmosphere
of nitrogen for 32 hours. The reaction mixture was diluted with saturated aqueous
ammonium chloride solution (5ml) and extracted with dichloromethane (2x 7ml).
The combined extracts were dried (Na2S04), filtered and concentrated under reduced
pressure. Column chromatography (petrol-ethylacetate 3:2) yielded the title
compound as a colourless solid (23mg, 63%).
142
Method 3
A solution of 5p-bromo compound 165 (113mg, 0.45mmol) in degassed toluene
(lOcm^) was treated with the allylstannane 178 (260mg, 0.67mmol). A catalytic
amount of ACN (12mg) was added, and the reaction mixture was heated, at reflux
under an atmosphere of nitrogen. After two hours heating, the mixture was cooled
gradually to room temperature and the solvents evaporated under reduced pressure.
Column chromatography (hexane-ethyl acetate 9:1) gave the title compound as a
colourless solid (54mg, 51%), and 247 as a colourless solid (20mg, 19%).
247
RF 0.46 (hexane-ethyl acetate 1:1);
5h (CDC13) 2.01 (1H, dddd, i/gem = 18, J6 p,5 = 10, J6p,3 = 3, J6^2 = 3, Hz, 6P-H),
2.27 (1H, m, 5-H), 2.39 (1H, dddd, JgQm = 18, a ,5 = 6.5, ./6a ,2 = 2, J 6 a ,3 = 2,
Hz, 6a-H), 2.61 (1H, m, 3’-H), 2.81 (1H, m, 3’-H), 3.69 (3H, s, OMe), 4.40 (1H, m,
4-H), 4.61 (1H, dt, , Hz, 3-H), 5.65 (1H, m, l ’-H), 6.53 (1H, m, l ’-H), 6.75 (1H, m,
2-H);
5c (CDCI3) 24.5 (C-6), 29.4 (C-5), 32.7 (C-3’), 52.04 (OMe), 67.7 (C-4), 77.4 (C-
3), 130 (C-l), 131.2 (C-2’),131.6 (C-l’), 137.6 (C-2), 164.9 (C=0), 166.4 (C=0);
m/z (C.I.) 239 (MH+, 12%), 221 (8);
(Found: C 57.7; H 6.59 C12H14O5 requires C 60.48; H 5.94%).
143
Method 4
A solution of 5p-iodo compound 242 (120mg, 0.4mmol) in degassed toluene (lOcm^)
was treated with the allylstannane 178 (18ling, 0.6mmol). A catalytic amount of
ACN (lOmg) was added, and the reaction mixture was heated, at reflux under an
atmosphere of nitrogen. After two hours heating, the mixture was cooled gradually to
room temperature and the solvents evaporated under reduced pressure. Column
chromatography (hexane-ethyl acetate 9:1) gave the title compound as a colourless
solid (94mg, 56%), and 247 as a colourless solid (39mg, 23%).
Attempted synthesis of Methyl 3 a,4a-hydroxy-5p-methyl [3,3-difluoro-3-
(diethoxyphosphinyl)-2-methyI]propionate-cyclohex-l-ene-l-carboxylate (249)
Method 1
A solution of epoxide 120 (50mg, 0.294mmol) in benzene (7ml) was treated with
methyl [3,3 -difluoro-3 -(diethoxyphosphinyl)-2-hydroxy-2-methyl]propionate 248
(94mg, 0.324mmol) and titanium isopropoxide (0.13ml, 0.441mmol). The reaction
mixture was boiled for four hours under an atmosphere of nitrogen. T.l.c. analysis
(mobile phase = petrol/ ethyl acetate 1:1) indicated no conversion with starting
material remaining present.
144
Method 2
Synthesis of Isopropyl 3a,4a-hydroxy-5p-isopropylcycIohex-l-ene-l-carboxyIate
(250)
A solution of epoxide 120(89mg, 0.52mmol) in benzene (7ml) was treated with
methyl [3,3 -difluoro-3 -(diethoxyphosphinyl)-2-hydroxy-2-methyl]propionate 248
(305mg, 1.05mmol) and titanium isopropoxide (298mg, 1.05mmol). The reaction
mixture was stirred at room temperature for three hours. T.l.c. analysis (mobile
phase = petrol/ ethyl acetate 1:1) indicated the presence of a new spot with starting
material (86, R f = 0.51) remaining present. The reaction was left to stir overnight,
but t.l.c. analysis indicated that most of the starting material was still present. The
benzene was removed under reduced pressure and the reaction mixture was then
taken up in ether (10ml). 5% H2SO4 (5ml) was added and the reaction mixture was
stirred vigourously for one hour until two distict layers were visible. The organic
layer was then extracted with dichloromethane (2x5ml) and dried (MgSC>4). Column
chromatography (petrol/ethyl acetate 1:1- 3:2) yielded isopropyl 3a,4a-hydroxy-5[3-
isopropylcyclohex-l-ene-l-carboxylate 250 as a colourless oil (15mg, 11%).
v max (CHCI3) 3436, 2978, 2931, 1705, 1648, 1261, 1096 cm*1;
8h (CDCI3) 1.21 (12H, ddt, 7= 6Hz, J= 2Hz, >OPr Me), 1.74 (1H, br s, 4-OH), 2.12
(1H, dddd, Jgem = 17.5,76(3,5 = 9,76(3,2 = 1.0,76(3,3 = 1.0, Hz, 6(3-H), 2.86 (1H, d,
76a,5 4Hz, 6a-H), 2.95 (1H, br d, 3-OH), 3.64 (1H, dd, 75,6|3 = 9,74,5 = 4, Hz, 5-
H), 3.77 (2H, m, iOPr C-H), 4.5 (1H, br t, 74,5 = 4 ,74,3 = 4, Hz, 4-H), 5.07 (1H, m,
3-H), 6.88 (1H, m, 2-H);
6c (CDCI3) 21.8 (2x ipr Me), 22.2 (*Pr Me), 23.4 ('Pr Me), 30.1 (C-6), 65.8 (*Pr
CH), 68.4 (ipr C-H), 70.6 (C-5), 71.6 (C-4), 71.8 (C-3), 131.5 (C-l), 134.8 (C-2),
165.8 (C=0);
145
m/z (C.I.) 258 (M+, 3%), 171 (48), 128 (10);
(Found: C 59.0 H 8.57 C13H22O5 requires C 60.45 H 8.58.%).
Method 3
Synthesis of Methyl 3a,4a-hydroxy-5p-fluorocycIohex-l-ene-l-carboxylate (251)
A solution of epoxide 120 (70mg, 0.41mmol) in DCM (4ml) was treated with
methyl[3,3 -difluoro-3 -(diethoxyphosphinyl)-2-hydroxy-2-methyl]-propionate ̂ 1 248
(131mg, 0.45mmol). The reaction mixture was cooled to 0°C and boron trifluoride
etherate (5ml, 0.1 equv.) was added dropwise over five minutes. The reaction
mixture was then stirred at 0°C for one hour. T.l.c. analysis (mobile phase = petrol/
ethyl acetate 1:1) indicated that both starting materials remained but a new spot had
been formed. The reaction mixture was then stirred for a further three hours at 0°C
but t.l.c. analysis (mobile phase = petrol/ ethyl acetate 1:1) indicated that starting
material was still present. The reaction mixture was then allowed to warm to room
temperature and was stirred overnight but t.l.c. analysis indicated that the reaction
had not proceeded any further. Column chromatography (petrol-ethyl acetate 1:1-
1:3) gave 251 as a colourless oil (4mg, 5%).
5h (CDCI3) 2.45 (1H, m, 60-H), 2.82 (1H, m, 6a-H), 3.33 (2H, br s, 2x OH), 3.75
(3H, s, C0 2Me), 4.92 (1H, m, H-5), 4.45 (1H, br s H-3), 4.85 (1H, d m, H-4), 6.77
(1H, br s, H-2);
5f (CDCI3, 400) -194 to -193.7 (m);
5c (CDCI3, 400) 28.4 (C-6), 52.2 (OMe), 66.0 (C-5), 68.1 (C-4), 89.6 (C-3 ), 128.7
(C-l), 136.4 (C-2), 166.5 (C=0);
146
m/z (C. I.) 191 (MH+, 65%), 173 (100);
(Found: C 50.9 H 5.84 C8H11O4F requires C 50.53, H 5.83%).
Synthesis of Methyl 3a,4a-hydroxy-5p-fluorocyclohex-l-ene-l-carboxy!ate (251)
A solution of epoxide 120 (99mg, mmol) in DCM (2ml) was treated dropwise with
HF.pyridine (lml, mmol) under an atmosphere of nitrogen. After stirring for ninety
minutes the reaction was quenched with aqueous calcium carbonate (250mg in 9ml
water). The organic layer was then extracted with ethyl acetate (4x 10ml), dried
(MgS04) and concentrated under reduced pressure to give a colourless oil. Column
chromatography (petrol-ethyl acetate 1:9) afforded the title compound as a colourless
oil (47mg, 43%). Data as above.
147
REFERENCES
1 (a) E. Haslam, The Shikimate Pathway, Butterworths, London, 1974.
(b) B. Ganem, Tetrahedron, 1978, 34, 3353.
(c) U. Weiss and J. M. Edwards, The Biosynthesis o f Aromatic
Compounds,Wiley, New York, 1980.
(d) R.B. Herbert, The Biosynthesis o f Secondary Metabolites, Chapman and
Hall, London, 1981.
(e) K. B. G. Torsell, Natural Product Chemistry, Wiley, Chichester, 1983.
(f) E. Haslam, Shikimic Acid - Metabolism and Metabolites, John Wiley
and Sons, Chichester, 1993.
2 (a) J. F. Eykmann, Rec. Trav. Chim., 1885, 4, 3353.
(b) J. F. Eykmann, Ber. Dtsch. Chem. Ges., 1891, 24, 1278.
3 (a) H. O. L. Fischer and G. Dangschat, Helv, Chim. Acta., 1935, 18, 1204.
(b) H. O. L. Fischer and G. Dangschat, Helv, Chim. Acta., 1937, 20, 705.
(c) H. O. L. Fischer and G. Dangschat, Ber. Dtsch. Chem. Ges., 1932, 65,
1009.
4 P. Karrer and K. P. Link, Helv. Chim. Acta., 1927, 10, 794.
5 K.Freudenberg,H.Meisenheimer,J.T.Laneand E.Plankenhom
Liebigs. Ann. Chem. 1940,543,162.
6 B. D. Davis, Adv. Enzymol, 1955, 16, 287.
148
7 D. B. Sprinson, Adv. Carbohydrate Chem., 1961, 15, 235.
8 F. Gibson, and J. Pittard, Bact. Rev., 1968, 32, 468.
9 P. R. Srinivasan, D. B. Sprinson, J. Biol Chem., 1959, 234, 716.
10 A. B. Deleo and D. B. Sprinson, Biochem. Biophys. Res. Commun., 1968,
32,873.
11 M. Straub and G. Denes, Biochem. Biophys. Res. Commun., 1968, 32, 178
12 H. Nagano and H. Zalkin, Arch. Biochem. Biophys, 1970,138, 58.
13 (a) P. R. Srinivasan, J. Rothschild and D. B. Sprinson, J. Biol. Chem.,
1963, 238,3176.
(b) W. I. Maitra and D. B. Sprinson, J. Biol. Chem., 1978, 253, 5426.
14 J. R. Knowles, Aldrichimica Acta, 1989, 22, 59.
15 P. A. Bartlett and K. Satake, J. Am. Chem. Soc., 1988, 110, 1628.
16 (a) M. J. Turner, B. W. Smith and E. Haslam, J. Chem. Soc., Perkin
Trans. 1, 1975, 52.
(b) K. R Hanson and I. A. Rose, Proc. Natl. Acad Sci. USA, 1963, 50,
981.
(c) D. Sargent, M. J. Turner and R. S. Thompson, E. Haslam, J. Chem. Soc.
(C), 1971, 1489.
17 (a) C. Walsh, Enzymatic Reaction Mechanisms, Freeman, San Francisco,
1979, 555.
(b) S. Chaudhuri, J. M. Lambert, L. A. McColl and J. R. Coggins,
Biochem. J. , 1986, 239, 699.
(c) A. D. N. Vaz, J. R. Butler and M. J. Nugent, J. Am. Chem. Soc., 1975,
97, 5914.
(a) J. G. Levin and D. B. Sprinson, J. Biol. Chem., 1964, 239, 1142.
(b) J. G. Levin and D. B. Sprinson, Biochem. Biophys. Res. Commun.,
1960, 3, 157.
D. L. Anton, L. Hedstrom, S. M. Fish and R H. Abeles, Biochemistry,
1983, 22, 5903.
(a) K. S. Anderson, J. A. Sikorski and K. A. Johnson, Biochemistry,
1983, 27, 1604.
(b) K. S. Anderson, J. A. Sikorski and K. A. Johnson, Biochemistry, 1983,
27, 7395.
R. D. Sammons, G. C. Leo and J. A. Sikorski, J. Am. Chem. Soc., 1990,
112, 1653.
K. S. Anderson, J. A. Sikorski, A. J. Benesi and K. A. Johnson, J. Am.
Chem. Soc., 1988, 110, 6577.
P. N. Barlow, R. J. Appleyard, B. J. O. Wilson and J. N. S. Evans,
Biochem., 1989, 28 7985.
K. S. Anderson and K. A. Johnson, Chem. Rev., 1990, 90, 1131.
K. S. Anderson, R D. Sammons, G. C. Leo, J. A. Sikorski and K. A.
Johnson, Biochem., 1990, 29, 1460.
J. E. Ream, H. C. Steinrucken, C. A. Porter and J. A. Sikorski, J. Plant
Physiol, 1988, 87, 232.
J. L. Pawlak, R. E. Padykula, J. D. Kronis, R. A. Aleksejczyk and G. A.
Berchtold, J. Am. Chem. Soc., 1989, 111, 3374.
S. Balasubramanian and C. Abell, Tetrahedron Lett., 1991, 32, 963.
a) D. K. Onderka and H. G. Floss, J. Am. Chem. Soc., 1969, 91, 5894.
(b) D. K. Onderka and H. G. Floss, J. Biol. Chem., 1972, 247, 736.
P. A. Bartlett, U. Maitra and P. M. Chouinard, J. Am. Chem. Soc., 1986,
108, 8068.
P. A. Bartlett, K. L. McLaren, D. G. Alberg, A. Fassler, R. Nyfeler, C. T.
Lauhon and C. B. Grissom, Proceedings o f the Society for Chemical
Industry Pesticides Group Meeting, BCPC Monograph Ser. 1989,42, 155.
G. A. Berchtold, C. E. Grimshaw, J. R. Knowles, J. H. Hoare, . G. Sogo and
T. S. Widlanski, J. Am. Chem. Soc., 1984, 104, 2701.
R. McCridle, K. H. Overton and R. A. Raphael, J. Chem. Soc., 1960, 1560.
S.A. Bowles, Bath Ph. D. Thesis, 1988.
(a) P.A. Searle, Bath Ph. D. Thesis, 1992.
(b) M. M. Campbell, M. Sainsbury and P. A. Searle, Synthesis, 1993, 179.
(a) M. M. Campbell, A. D. Kaye and M. Sainsbury, Tetrahedron
Lett., 1983, 24,4745.
(b) M. M. Campbell, A. D. Kaye, M. Sainsbury and R. Yavarzadeh,
Tetrahedron Lett., 1984, 25, 1629.
151
(c) M. M. Campbell, A. D. Kaye, M. Sainsbury and R. Yavarzadeh,
Tetrahedron, 1984, 40, 2461.
37 (a) A. J. Birch, L. F. Kelly and D. V. Weerasuria, J'. Org. Chem., 1988, 62,
826.
(b) B. M. R. Bandara, A. J. Birch and L. F. Kelly, J. Org. Chem., 1984, 49,
2496.
38 A. J. Birch and D. H. Williamson, J. Chem. Soc. Perkin Trcms I, 1973,
1892.
39 T. Koizumi, T. Namika, T. Takahashi and Y. Takeuchi, Chem. Pharm.
Bull., 1988, 36, 3213.
40 (a) A. Ioybe, T. Koizumi and H. Takayama, J. Chem. Soc. Chem.
Commun., 1986, 771.
(b) C. H. Eugster, A. A. Hofmann and P. X. Iten, Helv. Chim. Acta.,
1978, 61, 430.
41 M. Koreeda, K. Y. Jung and J. Ichita, J. Chem. Soc. Perkin Trans. I,
1989, 2129.
42 M. Koreeda, K. Teng and T. Murata, Tetrahedron Lett., 1990, 31, 5997.
43 M. Koreeda and M. A. Ciufolini, J. Am. Chem. Soc., 1982, 104, 2308.
44 I. Flemming and P.E. J. Sanderson, Tetrahedron Lett., 1987, 28, 4229.
45 J. Harvey and S. Mirza, Tetrahedron Lett, 1991, 32, 4111.
46 J. S. Brimacombe, F. Hunedy and L. C. N. Tucker, J. Chem. Soc. C, 1968,
1381.
S. Jiang, B. Mekki, G. Singh and R. H. Wightman, Tetrahedron Lett.,
1994, 35, 5505.
T. V. RajanBabu, W. A. Nugent, D. F. Taber and P. J. Fagan, J. Am. Chem.
Soc., 1988, 110, 7128.
(a) C. R. Johnson, J. P. Adams and M. A. Collins, J. Chem. Soc. Perkin
Trans. 7, 1993, 1.
(b) C. R. Johnson, P. A. Pie and J. P. Adams, J. Chem. Soc., Chem.
Commun., 1991, 1006.
(c) L. Dumortier, P. Liu, S. Dobbelaere, J. Van der Eycken and M.
Vandewalle, Synlett, 1992, 243.
D. T. Gibsob, J. R. Koch and R E. Kallio, Biochemistry, 1968, 7, 2653.
C. R Johnson, P. A. Pie and J. P. Adams, J. Che,. Soc. Chem. Comm.,
1991, 1991, 1006.
S. Czemecki, C. Georgoulis, C. L. Stevens and K. Vijayakumaran,
Tetrahedron Lett., 1985, 26, 1699.
C. R. Johnson, J. P. Adams, M. P. Braun and C. B. W. Senanayake,
Tetrahedron Lett., 1993, 33, 919.
J. L. Luche, J. Am. Chem. Soc., 1978, 100, 2226.
P. H. J. Carlsen, T. Katsuki, V. S. Martin and K. B. Sharpless, J. Org.
Chem., 1981, 46, 3936.
P. A. Bartlett and L. A. McQuaid, J. Am. Chem. Soc., 1984,106, 7854.
E. Uhlmann and W. Pfleiderer, Tetrahedron Lett., 1980, 21, 1181.
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
153
L. Chahoua, M. Baltas, L. Gorrichon, P. Tisnes and C. Zedde, J. Org.
Chem., 1992, 57, 5798.
G. A. Berchtold and D. A. McGowan, J. Am. Chem. Soc., 1982, 104, 7036.
B. D. Davis and E. S. Mingioli, J. Bacteriol., 1953, 66, 129.
B. Ganem, C. P. Teng and Y. Yukimoto, Tetrahedron Lett., 1985, 26, 21.
P. A. Bartlett and P. M. Chouinard, J. Org. Chem., 1986, 51, 75.
G. A. Berchtold and D. A. McGowan, J. Am. Chem. Soc., 1982, 104, 1153.
G. A. Berchtold, J. H. Hoare and P. P. Policastro, J. Am. Chem. Soc., 1983,
105, 6264.
B. Ganem, N. Ikota, V. B. Muralidharen, W. S. Wade, S. D. Young and Y.
Yukimoto, J. Am. Chem. Soc., 1982, 104, 6787.
(a) B. Ganem and N. Ikota, J. Am. Chem. Soc., 1978, 100, 351.
(b) B. Ganem and N. Ikota, J. Chem. Soc. Chem. Commun., 1978, 869.
G. A. Berchtold and D. Lesuisse, J. Org. Chem., 1985, 50, 888.
G. A. Berchtold and J. L. Pawlak, J. Org. Chem., 1987, 52, 1765.
B. Ganem and H. B. Wood, J. Am. Chem. Soc., 1990, 112, 8907.
S. Greenberg and J. G. Moffatt, J. Am. Chem. Soc., 1973, 95, 4016.
T. Fex, J. Trofast and B. Wickberg, Acta. Chem. Scand, 1981, 35, 91.
B. Ganem and H. B. Wood, Tetrahedron Lett., 1989, 30, 6257.
J. H. Ottaway and D. K. Apps, Biochemistry, Bailliere Tindall, London,
1984, 4th Edn., pp. 29-32.
154
74 H. C. Steinriicken and N. Amrheim, Biochem. Biophys. Res. Commun.,
1980, 94, 1207.
75 J. G. Buchanan, V. B. Jigajinni, G. Singh and R. H. Wightman, J. Chem.
Soc. Perkin Trans. 1, 1987, 2377.
76 E . Dalcanale and F. J. Montanari, J. Org. Chem., 1986, 51, 567.
77 H. B. Wood Jr and B. Ganem, Tetrahedron Lett., 1993, 34, 1403.
78 A. B. McKittrick and B. Ganem, J. Org. Chem., 1985, 50, 5897.
79 R. O. Hutchins, I. M. Taffer and W. Burgoyne, J. Org. Chem., 1981, 46,
5214.
80 M. M. Campbell, M. F. Mahon, M. Sainsbury, P. A. Searle and G. M.
Davies, Tetrahedron Lett., 1991, 32, 951.
81 D. G. Albert and P. A. Bartlett, J. Am. Chem. Soc. , 1989, 111, 2337.
82 D. G. Albert, P. A. Bartlett, A. Fassler, C. B. Grisson, C. T. Lauhon, R
Nyfeler and K. L. McLaren, BCPC Monograph, 1989, 42, 155.
83 R. Wolfenden, Annu. Rev. Biophys. Bioeng., 1976, 5, 271.
84 P. A. Bartlett and G. R Stark, Pharmacol. Ther., 1984, 23, 45.
85 R. Azerad, C. Froussios, M. Level and P. le Marechal, Biochem. Biophys.
Rws. Commun., 1980, 92, 1104.
86 K. S. Anderson, J. R. Knowles, P. D. Pansegrau, J. E . Ream, R. D.
Sammons, J. A. Sikorski and T. Widlanski, Tetrahedron Lett., 1991, 32,
2589.
87 M. M. Campbell, H.S. Rabiasz, M Sainsbury and P.A. Searle,
Tetrahedron, 1992, 48, 9363.
155
88 D. Seebach, R. Henning and T. Mukhopadhyay, Chem. Ber., 1982, 115,
1705.
89 J. Hooz and S.S.H. Gilani, Can. J. Chem., 1968, 46, 86.
90 (a) J.E. Baldwin, R.M. Adlington, M.B. Mitchell and J. Robertson, J.
Chem. Soc. Chem. Comm., 1990, 1574.
91 J.E. Baldwin, R.M. Adlington, M.B. Mitchell and J. Robertson,
Tetrahedron, 1991, 47, 5901.
92 M.R. Marzabadi, J.L. Font, K.J. Gruys, P.D. Pansegrau and J.A. Sikorski,
Bio. Med. Chem. Letters, 1992, 2, 1435.
93 M. Caron and K.B. Sharpless, J. Org. Chem., 1985, 50, 1557.
94 H.B. Wood, H. Buser and B. Ganem, J. Org. Chem., 1992, 57, 178.
95 M. Koreeda and M.A. Ciufolini, J. Am. Chem. Soc., 1982, 104, 2308.
96 I.M. Downie, J.B. Holmes and J.B. Lee, Chem. Ind (London), 1966, 900.
97 (a) R.G. Weiss and E.I. Snyder, J. Org. Chem., 1971, 36, 403.
(b) R.G. Weiss and E.I. Snyder, Chem. Commun., 1968, 1358.
(c) R.G. Weiss and E.I. Snyder, J. Org. Chem., 1970, 35, 1627.
98 R. Appel, Angew. Chem. Int. Ed Engl, 1975,14, 86.
99 (a) L. Homer, H. Oediger and H. Hoffmann, Ann, 1959, 626, 26.
£b) G.A. Wiley, R.L. Herschkowitz, B.M. Rein and B.C. Chung, J. Am.
Chem. Soc., 1964, 86, 964.
100 (a) R. Rabinowitz and R. Marcus, J. Am. Chem. Soc., 1962, 84, 1312.
156
(b) F. Ramirez, N.B. Desai and N. McKelvie, J. Am. Chem. Soc., 1962, 84,
1745.
101 J.D. Salge, T.T.S. Huang and B. Franzus, J. Org. Chem., 1981, 46, 3526.
102 T. Tsunoda, Y. Yamamiyaand S. Ito, Tetrahedron Lett., 1993, 34, 1639.
103 H.S. Rabiasz, BathM. Phil. Thesis, 1994.
104 (a) A.K. Bose and B. Lai, Tetrahedron Lett., 1973, 40, 3937.
(b) S. Trippett, J. Chem. Soc., 1962, 2337.
(c) E. E. Schweizer, W. S. Creasy, K. K. Light and E. T. Shaffer, J. Org.
Chem., 1969, 34, 212.
105 S. B. Schryver and F. H. Lees, J. Am. Chem. Soc., 1901, 79, 563.
106 G. A. Olah, B. G. B. Gupta, R Malhotra and S. C. Narang, J. Org.
Chem., 1980, 45, 1638.
107 G. Bringmann and S. Schneider, Synthesis, 1983, 139.
108 J. P. Kutney and A. H. Ratcliffe, Synthetic Commun., 1975, 5, 47.
109 I. W. Harvey, E. D. Phillips and G. H. Whitham, J. Chem. Soc. Chem.
Commun., 1990,481.
110 C. M. M.,da Silva Correa and W. A. Waters, J. Chem. Soc.,
1968,1874-1879.
111 A. D. Jones, Final Year Project Report, University o f Bath, 1992.
112 Y. Ueno, M. Ohta and M. Okawara. J. Organometallic Chem. , 1980, 197,
Cl.
113
114
115
116
117
118
119
120
121
122
123
124
157
T. Migita, M. Kosugi, K. Takayama and Y. Najagawa, Tetrahedron,
1973,29, 51.
J. M. Sayer, P. Conlon, J. Hupp, J. Fancher, R. Belanger and E. J. White, J.
Am. Chem. Soc. Chem. Commun., 1990, 1574.
C. Walling, Tetrahedron, 1985, 41, 3887.
C.P. Jasperse, D.P. Curran and T.L. Fevig, Chem. Rev. 1991, 91,1237.
G. E. Keck, E. J. Enholm, J. B. Yates and M. R. Wiley, Tetrahedron,
1985, 41, 4079.
G. E. Keck and J. B. Yates, J. Am. Chem. Soc., 1982, 104, 5829.
B. Giese, T. Linker and R. Muhn, Tetrahedron, 1989, 45, 935.
M. Karplus, J. Chem. Phys., 1959, 30, 11.
(a) B. Talapartra, A . K. Das and S. K. Talaparta, Phytochemistry, 1989, 28,
290.
( b ) S. Castellino, G. C. Leo, R. D. Sammons and J. A . Sikorski, J. Org.
Chem., 1991, 56, 5176.
L. D. Hall, J. Org. Chem., 1964, 29, 297.
D. P. Curran, Synthesis, 1988, 489.
(a) J. Dupuis, B. Giese, D. Ruegge, H. Fischer, H. G. Korth and R.
Sustmann, Angew. Chem. Int. Ed. Engl, 1984, 23, 896.
( b ) H. G. Korth, R. Sustmann, J. Dupuis and B. Giese, J. Chem. Soc.
Perkin. Trans. 2, 1986,
(c) B. Giese, Angew. Chem. Int. Ed Engl., 1989, 28, 969.
125
126
127
128
129
130
131
132
133
134
135
158
(a) F. D. Greene, C. C. Chu and J. Walia, J. Org. Chem., 1964, 29, 728.
(b) D. Lefort, J. Fossey, M. Gruselle and J. Y. Nedelec, Tetrahedron,
1985, 41, 4237.
(a) Y. D. Wu and K. N. Houk, J. Am. Chem. Soc., 1987, 109, 908.
(b) D. C. Spellmeyer andK. N. Houk, J. Org. Chem., 1987, 52, 959.
B. Giese, J. Hartung, J. He, O. Hiiter and A. Koch, Angew. Chem. Int. Ed.
Engl., 1989, 28, 325.
D. H. R. Barton and S. W. McCombie, J. Chem. Soc. Perkin Trans. I,
1975, 1574.
D. H. R. Barton, D. Crich, A Lobberding and S. Z. Zard,
Tetrahedron, 1986, 42, 2329.
M. Pereyre, J.-P. Quintard, A. Rahm, Tin In Organic Chemistry,
Butterworths, London, 1987.
(a) M. J. Robins and J. S. Wilson, J. Am. Chem. Soc., 1981, 103, 933.
(b) M. J. Robins, J. S. Wilson and F. J. Hansske, J. Am. Chem. Soc., 1983,
105, 4059.
(a)Y. K. Rao and M. Nagarajan, J. Org. Chem. 1989, 54, 5678.
(b)Y. K. Rao and M. Nagarajan, Tetrahedron Lett. 1988, 29,107.
C. G. Overberger, H. Biletch, A. B. Finestone, J. Lilker and J. Herbert, J.
Am. Chem. Soc., 1953, 75, 2078.
G. E. Keck and D. A. Burnett, J. Org. Chem., 1987, 52, 2960.
D. H. R. Barton and J. C. Jaszberenyi, Tetrahedron Lett. 1989, 30, 2619.
136
137
138
139
140
141
142
143
144
145
146
147
148
159
0. Mitsunobu, Synthesis, 1981,1.
R. D. Dawe, F. Molinski and J.V. Turner, Tetrahedron Lett, 1984, 25,
2061.
G. A. Keck, S. Danishefsky and E. J. Enholm, J. Org. Chem., 1985, 50,
4317.
J. S. Bajwa ans R. C. Anderson, Tetrahedron Lett., 1991, 32, 3021.
(a) A. L. J. Beckwith and P. E. Pigou, Aust. J. Chem. 1986, 39, 77.
(b) K. U. Ingold, J. Lusztyk and J. C. Sciano, J. Am. Chem. Soc., 1984,
106, 343.
A. M. Kawamoto, Bath Ph. D. Thesis, 1995.
M. Caron and K. B. Sharpless, J. Org. Chem., 1985, 50, 1560.
J. M. Chong and K. B. Sharpless, J. Org. Chem., 1985, 50, 1563.
P. N. Guivisdalsky and R. Bittman, J. Am. Chem. Soc., 1989, 111, 3077.
N. Takaishi, H. Takaishi, Y. Inamoto, Tetrahedron Lett. 1985, 26, 2361.
G. A. Olah, J. T. Welch, Y. D. Vankar, M. Nojima, I. Kerekes, and J. A.
Olah, J. Org. Chem., 1979, 44, 3872.
D. D. Perrin, W. L. F. Armarego and D. R. Perrin, Purification o f
Laboratory Chemicals, Pergamon, Oxford, 1980, 2nd Edn.
G. W. J. Fleet, T. K. M. Shing and S. M. Warr, J. Chem. Soc. Perkin. Trans.
1, 1984, 905.