Post on 12-Nov-2021
Syn-824Synthetic Metalworking Coolant & Lube
While working with ferrous and non-ferrous metals, it is
essential to use a coolant and lubricant that can withstand the
heat. Syn-824 is a water-soluble, synthetic coolant and lube
that contains no silicone or sulfur making it ideal for machining
operations like cutting, grinding, turning and more. When
diluted for use, Syn-824 makes a clear solution that gives the
operator a clear view of the workpiece. It also uses special
corrosion inhibitors to protect finished work from flash rusting.
• Can be used with all ferrous and non-ferrous metals
• When diluted, clear solution makes workpiece more visible
• Protects finished work from flash rusting
• Contains no silicon & is non-corrosive to all metals
T E C H N I C A L D A T A S H E E T
© 2012 Continental Research Corporation. [112612]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7
Water soluble coolant and lubricant for use on all ferrous & non-ferrous metals while cutting, grinding, turning & more
Areas of Use:PlumbingMaintenanceHVACAutomotiveConstruction Sites
Use On:AluminumCopperBrassLeadZinc
TinSteelStainless SteelCarbon Steel Cast Iron
SKU: 43399
P R O D U C T L A B E L
© 2012 Continental Research Corporation. [112612]H A S S L E F R E E B U S I N E S S S I N C E 1 9 6 7
Syn-824Syn-824Syn-824Syn-824• Designed for use with all ferrous & non-ferrous
metals in cutting, grinding, turning & other machining operations
• Protects finished work from flash rusting
• Contains no silicon & is non-corrosive to all metals
SOLD BY:
CAUTION: HARMFUL IF SWALLOWED. SEE SIDE PANEL FOR ADDITIONAL PRECAUTIONS.
KEEP OUT OF REACH OF CHILDREN. NET CONTENTS: GALLONS
HANDLING & STORAGE: Keep container tightly closed when not in use. Do not store in unmarked containers. Do not mix with any other chemicals. Store container in cool, dry place. Keep away from acids and strong oxidizing chemicals.
CONTAINS (CAS#): Water (7732-18-5), Proprietary Amine containing alcohol (Proprietary), Polyalkylene glycol (Proprietary), Triethanolamine (102-71-6), Monoethanolamine (141-43-5).
NFPA RATINGS: Health -1; Flammability -1; Reactivity -0.
KEEP OUT OF REACH OF CHILDREN.
SEE M.S.D.S. SHEET FOR COMPLETE SAFETY INFORMATION.
Syn-824 is a synthetic, water soluble coolant and lubricant designed for use on all ferrous and non-ferrous metals. It contains no silicone or sulfur. When diluted for use, Syn-824 makes a clear solution that gives the operator a clear view of the workpiece. It also uses special corrosion inhibitors to help protect finished work from flash rusting.
DIRECTIONS: Reservoirs should be drained and flushed free of all old lubricants. Dilution ratios can be varied to meet severe or mild conditions, see below. For best results, monitor the tool temperature to determine proper dilution for a particular operation.
SEVERE OPERATIONS & HARD METALS: 1:10 dilution
LIGHT DUTY OPERATIONS: 1:20 or 1:30 dilution
CAUTION: Harmful if swallowed. May irritate eyes.
FIRST AID:
INGESTION: Call a physician immediately. Give several glasses of water. DO NOT induce vomiting unless instructed by a physician or poison control center.
EYES: Flush eyes and under eyelids with water for at least 15 minutes. If discomfort persists, contact a physician.
SKIN: Wash skin with soap and water. If irritation is persistent, contact a physician.
INHALATION: Remove person to fresh air. Call a physician if irritation persists.
Synthetic Metalworking Coolant & Lube
Synthetic Metalworking Coolant & Lube
Syn-824Syn-824Syn-824Syn-824• Designed for use with all ferrous & non-ferrous
metals in cutting, grinding, turning & other machining operations
• Protects finished work from flash rusting
• Contains no silicon & is non-corrosive to all metals
SOLD BY:
CAUTION: HARMFUL IF SWALLOWED. SEE SIDE PANEL FOR ADDITIONAL PRECAUTIONS.
KEEP OUT OF REACH OF CHILDREN. NET CONTENTS: GALLONS
HANDLING & STORAGE: Keep container tightly closed when not in use. Do not store in unmarked containers. Do not mix with any other chemicals. Store container in cool, dry place. Keep away from acids and strong oxidizing chemicals.
CONTAINS (CAS#): Water (7732-18-5), Proprietary Amine containing alcohol (Proprietary), Polyalkylene glycol (Proprietary), Triethanolamine (102-71-6), Monoethanolamine (141-43-5).
NFPA RATINGS: Health -1; Flammability -1; Reactivity -0.
KEEP OUT OF REACH OF CHILDREN.
SEE M.S.D.S. SHEET FOR COMPLETE SAFETY INFORMATION.
Syn-824 is a synthetic, water soluble coolant and lubricant designed for use on all ferrous and non-ferrous metals. It contains no silicone or sulfur. When diluted for use, Syn-824 makes a clear solution that gives the operator a clear view of the workpiece. It also uses special corrosion inhibitors to help protect finished work from flash rusting.
DIRECTIONS: Reservoirs should be drained and flushed free of all old lubricants. Dilution ratios can be varied to meet severe or mild conditions, see below. For best results, monitor the tool temperature to determine proper dilution for a particular operation.
SEVERE OPERATIONS & HARD METALS: 1:10 dilution
LIGHT DUTY OPERATIONS: 1:20 or 1:30 dilution
CAUTION: Harmful if swallowed. May irritate eyes.
FIRST AID:
INGESTION: Call a physician immediately. Give several glasses of water. DO NOT induce vomiting unless instructed by a physician or poison control center.
EYES: Flush eyes and under eyelids with water for at least 15 minutes. If discomfort persists, contact a physician.
SKIN: Wash skin with soap and water. If irritation is persistent, contact a physician.
INHALATION: Remove person to fresh air. Call a physician if irritation persists.
Synthetic Metalworking Coolant & Lube
Synthetic Metalworking Coolant & Lube