Post on 03-Apr-2018
7/28/2019 Switching Single Phase Out 12 - 15Vdc
http://slidepdf.com/reader/full/switching-single-phase-out-12-15vdc 1/3
INPUT TECHNICAL DATA
OUTPUT TECHNICAL DATA
APPROVALS
CS2CV Cod. XAS2CV
GENERAL TECHNICAL DATA
VERSIONS
Schema di principio
APPLICATIONS
1
90 – 264 Vac / 110 – 230 Vdc (1)47 – 63 Hz0.23 A a 120 Vac / 0.12 A a 230 Vac< 7 A< 0.6 full loadT 0.8 A (inside mounted)
> 8 6 %1.5 W-20 – 60°C3 kVac / 60 sclass 2 without PEclass 2 without PEIP 20IEC 950, EN 60950EN 50081-1, EN 50082-2EN61000-4-2, EN61000-4-4 l iv. 4terminal blocks 2.5 mm 2, pluggable
polyamide UL94V-0130 g (4.56 oz)vertical on rail, allow 5 mm spacingbetween adjacent componentsPR/3/AC - PR/3/AS
12 Vdc ± 1% (not adjustable)1.5 A1.25 A< 1%< 50 mVpp< 1 1 m sHiccup circuit, auto reset –possible with external protection diode
Rated voltageFrequencyCurrent at lout maxInrush current at cold start at 230 VacPower factorProtection fuse
VoltageMaximum currentContinuous currentLoad regulationRipple at lout maxHold up timeOverload/short circuit protectionOutput signalParallel connection
EfficiencyDissipated powerOperating temperatureInput / output isolationInput / ground isolationOutput / ground isolationProtection degreeStandard / ApprolvasEMC standardsSurge immunityConnection terminal blocks
Housing materialApproximative weightMounting informationMounting railaccording to IEC6071 5/TH35
• Input voltage 90–2 64 Vac / 11 0-230 Vdc• Standard housing accordin to DIN 438 80 (CS2CV)• IP 20 protection degree
• Overtemperature protection (CS2CV)• DIN rail mounting
( 1 ) W i t h 1 1 0 – 1 2 7 V d c i n p u t v o l ta g e , t h e o u t p u t c u r r e n t m u s t b esubjected to a 25% d ecrease.
NOTES BLOCK DIAGRAM
Single phase switchingpower supply 12 Vdc stabilized output
34(1.34)
70(2.76)
90(3.55)
N O VI T A
’
c a b u r
REV. 03/12/04
7/28/2019 Switching Single Phase Out 12 - 15Vdc
http://slidepdf.com/reader/full/switching-single-phase-out-12-15vdc 2/3
• 90-2 64 Vac/110– 350 Vdc input voltage• E le c t r o n ic p r o te c t i on a g a i n st s h o r t c i r c u i t, o v er l o ad ,
over tempera tu re
• Output limited at 20 Vdc in case of internal or external failure• High efficiency and low dissipated power• Suitable for SELV and PELV circuitry
INPUT TECHNICAL DATA
VoltageMaximum currentContinuous currentLoad regulationRipple at lout maxHold up timeOverload / short circuit protectionOutput signal
Parallel connection
OUTPUT TECHNICAL DATA
APPROVALS
Standard
With failure contact
Dimensions indicated on drawings and photos, are overall dimensions, areinclusive of external components such as terminal blocks and Din-railclamps.(1) Version not available.(2) With 100– 127 Vdc input voltage, a 25% derating to the rated outputcurrent must be applied(3) For good cooling of the power supply, a 50 mm free space on upper andlower sides and 10 mm spacing between adjacent components must beallowed; if the device is mounted in horizontal position, left side must be kepttowards the bottom, a 50 mm spacing between adjacent components must
be allowed and the output current reduced by a 25%.
CSF3B cod. XCSF3B
- (1)
GENERAL TECHNICAL DATA
VERSION
NOTES BLOCK DIAGRAM
Single phase switchingpower supply 12-15 Vdc stabilized output
APPLICATIONS
With their 90-264 Vac and 110-230 Vdc input range, they aresuitable in every supply mains.The devices comply with residen-t ial EMC level, more severe thanindustrial level. Engineering hasbeen focused on achieving anhigh eff iciency to reduce energyconsumption and operating tem-perature of the components.Thisef f ic iency moreover makes alarge stock of power avai lableenabling to get a current boost of
1A more than the nominal cur-rent up to an operating tempera-ture of 25°C, and a rated currentof 3A and 5A at an ambient tem-perature of 60°C, without excee-ding the standard temperaturel imits and guaranteeing safetyand reliability.Short-circuit - overload - overtemperature protections are setto give +150% of the rated cur-rent in order to feed heavy loads,start-up currents, while the overtemperature protection preventsthe fai lure of the power supplyalso in the case of long durationof the overload with high ambienttemperature.Output voltage is adjustable from
12 Vdc to 15 Vdc and is protec-ted from overvoltage in the DCline. The housing assures a highventi lat ion of the internal compo-nents, compact dimensions anda IP20 protection degree accor-ding to IEC529 Std.Battery charger: these unitsare suitable as battery chargerswhile feeding other loads.For this purpose, developed thecost effective CSBC module (Cat.No. XCSBC) has been developed,featur ing protect ion diodes,charging current l imit ing resistorand protection fuses for the bat-tery. For more details, lease referto the accessories section.
1
90–2 64 Vac / 110– 230 Vdc (2)47–63 Hz1.3 A @ 120 Vac / 0.7 A @ 230 Vac< 2 0 A> 0 .7T 2 A (internal)
> 86 % @ 120 Vac / > 90 % @ 230 Vac11.7 W @12 0 Vac / 8 W @ 230 Vac-20 – + 60°C, with thermal protection3 kVac / 60 s1.5 kVac / 60 s0.5 kVac / 60 sIP20IEC950, EN60950, UL 508cEN50081-1, EN50082-1, EN61000-3-2EN61000-4-2, EN61000-4-4, EN61000-4-5, level 4Screw type 2.5 mm 2
Aluminium and stainless steel515 g (18.1 oz)Vertical on rail (3)
PR/3/AC - PR/3/AS
12– 15 Vdc adjustable7.5 A @ 120 Vac / 8.5 A @ 230 Vac5 A @ 15 V / 6 A @ 12 V (+1 A continuous @ 25°C)< 1%70 mVpp @ 120 Vac / 40 mVpp @ 230 Vac> 20 ms at 23 0Vac (full load)Hiccup 1.6 In auto reset / over temperature protectionStandard version: —"P" version: not availableStandard ve rs ion: Poss ib le w it h exter na l d iode
"P" version: not available
CSF5B cod. XCSF5B
- (1)
90–2 64 Vac / 110– 230 Vdc (2)47–63 Hz1.8 A @ 120 Vac / 1 A @ 230 Vac< 2 0 A> 0 .7T 3.15 A (internal)
> 86 % @ 120 Vac / > 90 % @ 230 Vac17.9 W @12 0 Vac / 11 .8 W @ 230 Vac-20 – + 60°C, with thermal protection3 kVac / 60 s1.5 kVac / 60 s0.5 kVac / 60 sIP20IEC950, EN60950, UL 508cEN50081-1, EN50082-1, EN61000-3-2EN61000-4-2, EN61000-4-4, EN61000-4-5, level 4Screw type 2.5 mm 2
Aluminium and stainless steel535 g (18.8 oz)Vertical on rail (3)
PR/3/AC - PR/3/AS
12– 15 Vdc adjustable11.5 A @ 12 0 Vac / 14 A @ 230 Vac7 A @ 15 V / 8 A @ 12 V (+1 A continuous @ 25°C)< 1%80 mVpp @ 120 Vac / 50 mVpp @ 230 Vac> 20 m s at 230 Vac (full load)Hiccup 1.6 In auto reset / over temperature protectionStandard version: —" P" version: not availableStandard ve rs ion: Poss ib le w it h exter na l d iode
" P" version: not available
Rated voltageFrequencyCurrent at lout max.Inrush current at cold start at 230 VacPower factorProtection fuse
Output signal std version"P" version
Parallel connection std version
"P" version
VoltageMaximum currentContinuous currentLoad regulationRipple at lout maxHold up timeOverload / short circuit protectionOutput signal standar version
"P" versionParallel connection standar version
"P" version
EfficiencyDissipated pow erOperating temperatureInput / outpu t isolationInput / ground isolationOutput / ground isolationProtection degreeStandards / ApprovalsEMC StandardsSurge immunityConnection terminal blocks
Housing materialApprox. weightMounting information
Mounting rail typeaccording to IEC60715/TH35
13 0(5.11)
1 15(4.52)
55(2.17)
130(5.11)
115(4.52)
5 5(2.17)
REV. 03/12/04
7/28/2019 Switching Single Phase Out 12 - 15Vdc
http://slidepdf.com/reader/full/switching-single-phase-out-12-15vdc 3/3
• 120 and 230 Vac double input voltage• Electronic protection against short circuit, overload, over tem-
perature
• Output limited at 20 Vdc in case of internal or external failure• High efficiency and low dissipated power• Suitable for SELV and PELV circuitry
INPUT TECHNICAL DATA
OUTPUT TECHNICAL DATA
APPROVALS
Standard
With failure contactCSF10B cod. XCSF10B
- (1)
GENERAL TECHNICAL DATA
VERSION
NOTES BLOCK DIAGRAM
Single phase switchingpower supply 12-15 Vdc stabilized output
APPLICATIONS
The devices comply with residen-t ial EMC level, more severe thanindustrial level. Engineering hasbeen focused on achieving anhigh eff iciency to reduce energyconsumption and operating tem-perature of the components.Thisef f ic iency moreover makes alarge stock of power avai lableand a rated current at anambient temperature of 60°C,without exceeding the standardtemperature l imits and guaran-
teeing safety and reliability.Short-circuit - overload - overtemperature protections are setto give +150% of the rated cur-rent in order to feed heavy loads,start-up currents, while the overtemperature protection preventsthe fai lure of the power supplyalso in the case of long durationof the overload with high ambienttemperature.Output voltage is adjustable from12 Vdc to 15 Vdc and is protec-ted from overvoltage in the DCline. The housing assures a highventi lat ion of the internal compo-nents, compact dimensions anda IP20 protection degree accor-ding to IEC529 Std.
Battery charger: these unitsare suitable as battery chargerswhi le feeding other loads. Forthis purpose, developed the costeffective CSBC modu le (Cat. No.XCSBC) has been developed,featur ing protect ion diodes,charging current l imit ing resistorand protection fuses for the bat-tery. For more details, leaserefer to the accessories section.
1
120 and 230 Vac ± 10% (2)47– 63 Hz3.5 A @ 120 Vac / 1.8 A @ 230 Vac< 3 5 A> 0.6 @ 12 0 Vac / > 0.85 A @ 230 VacT 6.3 A (internal)
> 87 % @ 120 Vac / > 87 % @ 230 Vac36 W @12 0 Vac / 36 W @ 230 Vac-20 – + 60°C, with thermal protection3 kVac / 60 s1.5 kVac / 60 s0.5 kVac / 60 sIP20IEC950, EN60950, UL 508cEN50081-1, EN50082-1, EN61000-3-2EN61000-4-2, EN61000-4-4, EN61000-4-5, level 4Screw type 2.5 mm 2
Aluminium and stainless steel920 g (32.4 oz)Vertical on rail (3)
PR/3/AC - PR/3/AS
12– 15 Vdc adjustable1 7 A16 A (+ 1 A cont inuous @ 2 5°C)< 1%60 m Vpp @ 230 Vac> 40 m s at full loadHiccup 1.1 In auto reset / over temperature protection —not availablepossible with external diode
not available
Rated voltageFrequencyCurrent at lout max.Inrush current at cold start al 230 VacPower factorProtection fuse
VoltageMaximum currentContinuous currentLoad regulationRipple at lout maxHold up timeOverload / short circuit protectionOutput signal std version
"P" versionParallel connection std version
"P" version
VoltageMaximum currentContinuous currentLoad regulationRipple at lout maxHold up timeOverload / short circuit protectionOutput signal standar version
"P" versionParallel connection standar version
"P" version
EfficiencyDissipated pow erOperating temperatureInput / outpu t isolationInput / ground isolationOutput / ground isolationProtection degreeStandards / ApprovalsEMC StandardsSurge immunityConnection terminal blocks
Housing materialApprox. weightMounting information
Mounting rail typeaccording to IEC60715/TH35
Dimensions indicated on drawings and photos, are overall dimensions, are inclusive of externalcomponents such as terminal blocks and Din-rail clamps. If not specified, the technical data inthis catalogue are typical and measured at 25 °C (77°F), 230 Vac, Unom Vdc and rated current;ripple is measured with probe connected to 0.1uF/20MHz termination.(1) Version not available.(2) With a feed of 120 Vac (range 100 -13 2 Vac), connecting a jumper wire (not furnished)to the “120 Vac voltage selection bridge” terminal blocks; the jumper wire must have thesame cross section of L and N wires and m ust be fully isolated in order to keep the IP20protection degree offered by the power supply. With a feed of 230 Vac (range 185-2 64Vac), DO NOT CONNECT the “12 0 Vac voltage selection bridge” terminal blocks; otherwisecan be damage the power supply.(3) For good cooling of the power supply,a 5 0mm free space on upper and lower sides and10 mm spacing between adjacent components must be allowed; if the device is mountedin horizontal position, left side must be kept towards the bottom, a 50 mm spacing betweenadjacent components must be allowed and the output current reduced by a 25%.
13 7(5.39)
140(5.51)
73(2.88)
REV. 03/12/04