Post on 03-Mar-2021
PATENTED TECHNOLOGY
info@incideblanks.com INCIDEblanks.com 310 225 6774
A HIGH PERFORMANCE SURFBOARD BLANK
( CROSS-SECTION OF AN INCIDE BLANK )
1” - EPS foam
1” - EPS foam
SURFBOARD BLANK TECHNOLOGY
Until now, the structure of a surfboard has been rooted in the wooden stringer.As a board is shaped, the stringer is thinned down with each pass of the planer.
THIS ALTERS THE STRUCTURE OF THE BOARD.A thick board has more structure, making the board sti�er in turns.A thinner board has less structure making the board more �exible.Instead of relying on a wooden stringer that is altered as the board is shaped,INCIDE sandwiches the structure inside of the foam blank via 'THE BRAIN'.
This carbon �ber part is pre-tuned prior to shaping allowing the board to be shaped without alteringthe �ex or integrity of the structure. With 'THE BRAIN', we are improving the classic wooden stringer,now providing board builders the ability to approach their shaping in a new light, opening new doorsfor design and processes in which boards are made.
T H E B R A I N
info@incideblanks.com INCIDEblanks.com 310 225 6774
This amazing weight to strength rationmakes carbon �ber one of the most high
performance materials out there.
With INCIDE’s blank technology, the performance andstructure of the surfboard is �xed in carbon �ber.
Up until now people have only used carbon �ber in theexternal shape of the board. This does not work for
a number of reasons, mainly cost and the inability to tuneyour shape making it simply an expensive glass job.
Instead we use carbon to actually make a better boardby not only extending the performance life of your
board, but increasing the ability to
1/3 THE WEIGHT
5 x STRONGER than
2 x AS STIFF
FINE TUNE THE FLEX.
A R B O N SURFBOARD BLANK TECHNOLOGY
info@incideblanks.com INCIDEblanks.com 310 225 6774
P U N K E R P A T
Flex is best decribed as the way a board bends, then recoils as it comes back to static.The faster the recoil, the more lively the board feels.Feeling this response is what gives that magic board feeling.The key to INCIDE's blanks is that we have the ability to control this �ex independent from the design.
F L E X SURFBOARD BLANK TECHNOLOGY
info@incideblanks.com INCIDEblanks.com 310 225 6774
S H A P E A T W I L L SURFBOARD BLANK TECHNOLOGY
info@incideblanks.com INCIDEblanks.com 310 225 6774
WILL I PLANE INTO THE CARBON ‘BRAIN’? Unlikely - the brain is suspended in a spot that is untouched by the Shaper 99% of the time.
WELL - WHAT IF I DO HIT IT? Not a problem, as strong and durable as carbon is - it can be cut with normal household scissors your planer will win and live to shape another rail.
WHERE IS THE ‘BRAIN’ LOCATED? The bottom of the brain is �at - locate the center seem on the rail of the blank All of the foam below that line, is ‘brain’-less - shape away // measure an inch Down from the deck - it too is ‘brain’-less.
INCIDE 600 DM LENGTH : 6’ 2.8” WIDTH : 22.2”VOLUME : 60.1 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10054.7 cm2 BOT : 9781.6 cm2
SCOOP
ThicknessWidth
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
50.8”
56.8”
5’ 2.8”
5’ 8.8”
5’ 11.8”
6’ 2.8”
12.5”0.9”
14.4”1.0”
17.4”1.0”
19.5”1.0”
21.1”
22.2”1.0”
20.2”1.0”
15.9”1.0”
12.4”1.0”
9.8”1.6”
5.9”1.4”
1.0”
2.2”
1.8”
1.5”
1.0”
0.6”
0.3”
37.7
0.4”
0.9”
1.7”
2.8”
3.6”
4.9”
10.2”0.9”
35.4”
5’ 2.8”
12.0”
18.4”1.0”
info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 604 DM LENGTH : 6’ 2.8” WIDTH : 22.2”VOLUME : 59.6 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10044.7 cm2 BOT : 9773.7 cm2
SCOOP
ThicknessWidth
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
56.4”
5’ 2.8”
5’ 8.4”
5’ 11.4”
6’ 2.4”
1.0”
1.0”
1.0”
1.0”
1.0”
22.12”
22.2”1.0”
1.0”
1.0”
1.0”
1.6”
1.4”
1.0”
2.2”
1.8”
1.5”
1.0”
0.6”
0.3”
37.4
0.4”
0.8”
1.3”
2.2”
2.9”
3.9”
1.0”
35.2”
12.0”
5’ 2.4”
50.4”
info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 602 CHUM LENGTH : 6’ 2.4” WIDTH : 22.2”VOLUME : 58.4 I SURFACE : 8640.5 cm2
SURFACE DEV DECK : 9969.6 cm2 BOT : 9704.3 cm2
SCOOP
ThicknessWidth
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
56.4”
5’ 2.8”
5’ 8.4”
5’ 11.4”
6’ 2.4”
10.2”0.9”
14.4”0.9”
22.36”1.0”
19.7”1.06”
21.1”1.06”
22.12”
20.3”0.9”
18.5”1.0”
16”1”
12.4”0.9”
9.8”1.6”
5.9”1.4”
1.0”
1.75”
1.5”
1.25”
0.9”
0.6”
0.25”
37.4
0.3”
0.75”
1.3”
2.2”
2.9”
3.9”
12.5”0.9”
35.2”
12.0”
5’ 2.4”
50.4”
info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 602 RC LENGTH : 6’ 2.8” WIDTH : 22.2”VOLUME : 59.4 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10037.7 cm2 BOT : 9768.0 cm2
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
50.8”
56.8”
5’ 2.8”
5’ 8.8”
5’ 11.8”
6’ 2.8”
10.2”1.0”
12.5”1.0”
14.4”1.0”
17.4”1.0”
19.6”1.0”
21.1”1.0”
22.2”
20.2”1.1”
18.4”1.0”
16.0”1.0”
12.4”1.0”
9.8”1.6”
5.9”1.4”
1.0”
2.0”
1.7”
1.4”
1.0”
0.6”
0.3”
37.9”
0.5”
0.9”
1.7”
2.8”
3.6”
4.9”
35.4”
SCOOP
ThicknessWidth
info@incideblanks.com INCIDEblanks.com 310 225 6774
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
35.4”
50.8”
56.8”
5’ 2.8”
5’ 8.8”
5’ 11.8”
6’ 2.8”
10.2”1.0”
12.5”1.0”
14.4”1.0”
17.4”1.0”
19.6”1.0”
21.1”1.0”
22.2”
20.2”1.1”
18.4”1.0”
16.0”1.0”
12.4”1.0”
9.8”1.6”
5.9”1.4”
1.0”
2.2”
1.8”
1.6”
1.0”
0.6”
0.3”
37.4”
0.4”
0.9”
1.7”
2.8”
3.6”
4.9”
ThicknessWidth
Scoop
INCIDE 603 HP LENGTH : 6’ 2.8” WIDTH : 22.2”VOLUME : 59.5 I SURFACE : 8686.2 CM2
SURFACE DEV DECK : 10041.9 CM2 BOT : 9771.4 CM2
info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 608 HP LENGTH : 6’ 8.8” WIDTH : 22.2”VOLUME : 63.5 I SURFACE : 9342.8 cm2
SURFACE DEV DECK : 10790.1 cm2 BOT : 10501.3 cm2
SCOOP
ThicknessWidth
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
50.8”
56.8”
5’ 2.8”
5’ 8.8”
5’ 11.8”
6’ 2.8”
10.2”1.0”
14.2”1.0”
17.1”1.0”
19.3”1.0”
20.8”1.0”
22.2”
19.8”1.0”
18.0”1.0”
15.6”0.9”
12.1”1.8”
9.6”1.5”
5.9”1.6”
1.0”
2.2”
1.8”
1.5”
1.0”
0.6”
0.3”
37.7
0.4”
0.9”
1.7”
2.8”
3.6”
4.9”
12.4”1.0”
35.4”
info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 609 HP LENGTH : 6’ 8.3” WIDTH : 22.2”VOLUME : 64.9 I SURFACE : 9342.8 cm2
SURFACE DEV DECK : 10824.3 cm2 BOT : 10528.8 cm2
SCOOP
ThicknessWidth
0.0”
3.0”
6.0”
12.0”
18.0”
24.0”
5’ 2.3”
5’ 2.8”
6’ 2.3”
6’ 5.3”
6’ 8.3”
1.0”
22.12”
1.0”
1.0”
1.0”
1.9”
1.6”
1.4”
1.0”
2.8”
2.3”
2.0”
1.3”
0.8”
0.4”
34.4
0.5”
1.1”
1.9”
2.2”
2.9”
3.9”
38.0”
12.0”
5’ 8.3”
56.3”
1.0”
1.0”
1.0”
1.0”
1.0”
info@incideblanks.com INCIDEblanks.com 310 225 6774
PATENTED TECHNOLOGY
P U N K E R P A T
USBlanksMANUFACTURED AND DISTRIBUTED by
info@incideblanks.com INCIDEblanks.com 310 225 6774
A HIGH PERFORMANCE SURFBOARD BLANK
SURFBOARD BLANK TECHNOLOGY
info@incideblanks.com INCIDEblanks.com 310 225 6774
INFO@USBLANKS.COMINCIDEBLANKS.COM
310 225 6774
USBlanks
MADE and DISTRIBUTED by
With the large amount of stoke INCIDE’s blanks were recievingit became clear we were going to need a bigger ship... A MUCH bigger ship.
We look forward to being able to fully service any order that may cometo fruition.
Hop on board - it’s going to be quite a journey.