Post on 25-Mar-2018
Home
Content
About usA short introduction
Main activities
Our standard
Cutting edge design and technology
ProduCtsProducts & Solutions
All products
Buffer Tanks
CDP© – Cuttings Discharge Pump
Cleaning Chemicals
CRI – Cuttings Re-Injection
Cuttings Blower unit
Cuttings drier
Fast Flow Pumps
HPU
IVAC
Multiair 195-10-D-Z2-CS
Mud Skips
Mud watcher
Rec Tanker
Shaker Screens
Singel Centrifugal Pump Skid
SRS – Swarf Removal System
SUPAVAC ™
Twin pump unit, centrifugal
Twin vacuum unit
V75 Vacuum Unit
Vacuum Unit
Well Service Pump
PersonnelA reliable problem solver
PArtnersOur partners
ContACtLocations
Employees
Content – OnSITE TREATMEnT TECHnOLOgIES
About OnSITE TREATMEnT TECHnOLOgIES
the ott objective is to provide effective Hse oriented solutions for the handling, processing and treatment of drilling waste materials
In order to meet the demand for innovative waste handling & management, OTT was established in 2002.
The OTT objective is to provide effective HSE oriented solutions for the handling, processing and treatment of drilling waste materials
OTT invests and innovates to improve on existing procedures and technology for both on and off-shore applications.
Our products is based on bAt (Best Available Techniques).
The OTT objective is to provide effective HSE oriented solutions for the handling, processing and treatment of drilling waste materials
About OnSITE TREATMEnT TECHnOLOgIES
Drill cuttings transport Drilling waste processing Storage tanks Pumps and transport systems Solids control Mud coolers Shakers & centrifuges Pit & process cleaning Chemical cleaning operations Oilfield rental equipment & services
Our products are based on BAT - Best Available Techniques. Our ethical standards are equally high.
About us – MAIn ACTIVITIES
The ability to create value is dependent on high ethical standards.
In its business activities, OTT will comply with applicable laws and regulations and act in an ethical, sustainable and socially responsible manner.
OTT will conduct its business in such a way that partners, suppliers and customers will have trust in the group.
We always make sure to comply with applicable laws and regulations and act in ethical, sustainable and socially responsible manners.
About us – OUR STAnDARD
As a company, OTT makes serious investments in research and development of new operating systems and, technology to maintain our position at the forefront of the industry.
All OTT equipment, systems and technology are in-house developments, patented accordingly.
We always make sure to comply with applicable laws and regulations and act in ethical, sustainable and socially responsible manners.
About us – CUTTIng EDgE DESIgn AnD TECHnOLOgy
ProduCts & SOLUTIOnS
ott operates an extensive rental fleet consisting of new and modern equipment.
Providing environmental protections that maintain operational efficiency through constant access to improvements and emerging technology.
ProduCts & SOLUTIOnS
Our extensive HSE oriented rental fleet consists of new and up-to-date equipment. We manage everything from liquid to stone and gravel. The product range also includes unique solutions designed to make the impossible possible.
one step aheadA wide range of solutions for environmental protection and emission control are offered, and to meet the evolving marked, OTT make sure to expand the number of products accordingly.
Full circle solutionsWe develop seamless solutions and take responsibility - from handling the waste onboard the platform to effective bulk transfer from the rig - including final onshore treatment of any type of drilling waste.
Providing environmental protections that maintain operational efficiency through constant access to improvements and emerging technology.
ProduCts – ALL
OTT is the sole supplier of this unique storage tank for drill cuttings
ProduCts – BUFFER TAnkS
40 m³ buffer tankOTT is the sole supplier of this unique storage tank for drill cuttings (80 mt). The Buffer Tank system is completely sealed and allows no leakage. Where other suppliers have limitations regarding solid waste, we manage everything from liquid to stone and gravel.
no need for pressureSimilar tanks on the market need pressure to empty. The attendant problems associated with clogging outlet valves and piping creates additional costs that we have eliminated.
The CDP system is an effective and safe solution for cuttings handling, ensuring the efficient transfer of cuttings from shakers to cuttings bins or slurry units.
ProduCts – CDP© – CUTTIngS DISCHARgE PUMP
effective & safeThe CDP system is an effective and safe solution for cuttings handling, ensuring the efficient transfer of cuttings from shakers to cuttings bins or slurry units. By filling containers within a radius of 4.5 or 5.8 meters, this efficient device has many features:
Remote operated Reduced labour requirement Reduced crane dependency and improved HSE conditions
OTT offers environmentally friendly additives for treatment of waste water on- and offshore.
ProduCts – CLEAnIng CHEMICALS
Zero harm to the environmentOTT provides complete packages of different Micro Emulsion (ME) for environmentally friendly chemical applications.
these me’s are well suitable for: Well bore clean up Tank / pit cleaning Slop splitting Cleaning of Oil Based Mud drill cuttings
OTT provides onshore facilities for the treatment of drilling waste, including systems for Thermal Treatment and Bioremediation, amongst others.
OTT supplies CRI systems. CRI results in zero discharge to the environment.
ProduCts – CRI – CUTTIngS RE-InjECTIOn
tailormade to meet any specificationsOTT supplies CRI systems. CRI results in zero discharge to the environment. The CRI process is permanent, safe and reliable.
The slurrification system is designed to receive drill cuttings from the rig´s solids control equipment. In addition, the systemcan also receive and process slop water from the mud pits, cementing room, wellhead or any other waste streams. High capacity Remote operated Reduce labour requirement Reduce crane dependency Improved HSE conditions
OTT pneumatic cuttings transport system is ideal for transporting drilled cuttings from shaker trough to skip loading station, directly into closed mud skips.
ProduCts – CUTTIngS BLOWER UnIT
teCHniCAl specifications
dimensions: Lenght: 1800 mm Width: 1200 mm Height: 1815 mm
Certification: Ex zone 1 ATEX Z015 DnV 2.7-1
Weight: Tare: 3000 kg Max: 3000 kg Pay: 0 kg
electrical: 230 V ac 2A 50/60Hz
Pneumatics: 1 line, instruments: 7 bar 1 line, 2”, 20m³/min, transfer pressure: 7 bar
The CSI Cuttings Drier type WSM – 04 Continuous Vertical Centrifuge (drier) can recover up to 96% of drilling fluids on cuttings.
ProduCts – CUTTIngS DRIER
maximizing recoveryDedicated to the volumetric reduction of drill solids waste and associated disposal expenses, ensuring environmental regulatory compliance while maximizing recovery of valuable base fluids.
The CSI Cuttings Drier type WSM – 04 Continuous Vertical Centrifuge (drier) can recover up to 96% of drilling fluids on cuttings.
Fast Flow hydraulic submersible pumps are sure to meet your pumping applications.It’s the little pump – that can do the big jobs!
ProduCts – FAST FLOW PUMPS
effective & safeFast Flow pump systems are perfect for tank cleaning operations that require high-volume pumping where large amounts of solids and fluid slurry have to be moved – quickly.
Our small-sized, portable pumps utilize special twist-connect fittings and hydraulic hoses that allow the customer to place the pumps wherever it is needed. Fast Flow can provide special application systems to reduce your pump down time and significantly reduce your maintenance expenses.
Frame (LxBxH-mm) 2000x1460x2350
ProduCts – HPU
Max flow 265 L / min ( 125 bar) Max pressure 350 bar (65 liter)
Certification: ATEX CE marked According to Zone 2 According to nORSOk +40 to –20degr C Certifi cation DnV 2.7-1 EX control panel Zone 1 EX capsle Zone 1
IVAC has a proven record of helping industries cut back expenses with cost effective clean-up solutions.
ProduCts – IVAC
GroundbreAKinG teCHnoloGYMore than just a vacuum, the unit is powered with compressed air, which not only creates a powerful vacuum but also powers the air flow behind the delivery system.
As a result, the vacuum can pick up your difficult materials and deliver them kilometres away through a pipeline to your desired location
Building on Calder’s established knowledge of designing and producing packaged diesel solutions for offshore applications they now offer a range of Zone II ATEX containerised compressors.
ProduCts – MULTIAIR 195-10-D-Z2-CS
Quality and reliabilityCalder Offshore Zone II Diesel CompressorCompressor ATEX 94/9/EC group 2 Cat 3g (Zone2)
The design allows for safe transportation, stacking and maintenance of the units in offshore environments and full access for maintenance onshore.
new design in order to meet the market requirements.
ProduCts – CLOSED MUD SkIPS
Quality and reliability Two double aluminum light weight sealed lids on each mud skip Improved double sealing on all lids with improved safety locks Up to four various size connections for vacum or positive pressure filling Corresponding connections to the new powerful vacum units Corresponding connections to the CDP All units vacum rated Fork lift pockets on all sides Comes complete with lifting slings
Monitoring mud condition, density, viscosity, temperature, OBM/WBM.
ProduCts – MUD WATCHER
lifting accessories Mechanical: forklift entry points Lifting eyes: 350 kg (if fitted)
dimensions Weight, dry: 250 kg Height: 1730 mm Width: 620 mm Depth: 620 mm Footprint: 0,38 m²
CertificationEx zone1 ATEX
The OTT rec tank is designed to meet the criteria for circulation and transfer of oil, mud, slurry, slops and other type of fluids.
ProduCts – REC TAnkER
the tank has a small footprint, light weight and comes complete with a dnV 2.7.1 lifting gear.
dimensions: L = 2300 mm W = 2200 mm H = 1654 mm
Weight: T = 2200 kg P = 9800 kg R = 12000 kg
OTT and Pacific Wire Panels are setting the standard for product integrity and performance. PWP manufactures a complete line of replacement screens for all types of shale-shakers in the oil field drilling industry.
ProduCts – SHAkER SCREEnS
one manufacturer supplying all your screening needs from stocking points across the globe: Outstanding quality Seriously environmental friendly Deposit on used screens (cash in return for used screens) Re-use of the frame material Cost effective Light weight Best available meshes Covers all solids removal needs – for any type of shakers
Multivoltage Zone 2
ProduCts – SIngEL CEnTRIFUgAL PUMP SkID
Pump 6x5x14 Impeller 11 (can be changed) ATEX coupling ATEX coupling protection Skid fundament ABB motor, 55kW, zone 2, multi voltage, 50-60Hz nORSOk Paint, blue color Starter cabinet with stainless EX-part and ATEX capsule, for zone 2 DnV 2.7-1 Size: LxBxH (2,0x1,0x1,2) meter Total weight 1,8 ton DnV 2.7-1 lifting gear Complete nORSOk documentation Heater Cabel 35,0 meter, ground 5,0 meter (with fastner) Phase protection, (the motor will not start unless hooked up correct)
The Swarf Removal System (SRS) is designed to remove metal swarf, large pieces of cement, pieces of casing, and other debris from the circulating fluid during casing milling operations
ProduCts – SRS – SWARF REMOVAL SySTEM
the process is based on two rotating concentric drums whose axis is tilted at a slight angle.
The circulating fluid and waste pass through a flow control device into the inner drum. The fluid passes through the perforations and meshes into a collecting tank below the drums and via this tank back to the platform mud circuit.
The swarf is retained within the drums, and due to the angle of inclination and the rotation of the drum is caused to travel down the length of the drum exiting the open end and by way of a chute into waste skips for disposal.
The mobile vacuum unit SV 60-V. The SV 60 is a one man operated vacuum unit.Capable of transfering almost any flowable material.
ProduCts – SUPAVAC™
Applications Tank cleaning Suction from drains Rig cleaning Drill cuttings Filters Hazardous waste transfer
technical information Height 110 cm (3’6”) Width 70 cm (2’3”) Length 90 cm (2’9”) Weight 198 kgs (484 lbs) Air consumption 150 cfm at 85 psi + 23’hg + vacuum Suction inlet 75 mm (3”) Discharge outlet 75 mm (3”) Handles solids to 50 mm (2”)
The twin pumping unit 2x55 CC is a containerized Centrifugal Pump Skid, rated at 150 BHP. This unit is designed specifically for well servicing applications in Zone 1 areas.
ProduCts – TWIn PUMP UnIT, CEnTRIFUgAL
designed specifically for well servicing applications in Zone 1 areas:The unit is capable of working at full capacity in ambient temperatures from –10° C to 45° C. The skid frame is designed and approved according to DnV 2.7-1.
The overalll unit is DnV approved.
In extension of OTT’s well recommended vacuum fleet, our newest design has more than four times the volume of suction, per pump, which gives the power needed to transport heavy waste over long distances.
ProduCts – TWIn VACUUM UnIT
real powerIn extension of OTT’s well recommended vacuum fleet, our newest design has more than four times the volume of suction, per pump, which gives the power needed to transport heavy waste over long distances
This containerized skid is designed and built to operate in high risk locations, in particularly Potentially Explosive Atmospheres Category 2g and is entitled to hold the ATEX Mark.
ProduCts – V75 VACUUM UnIT
built to operate in high risk locationsThe unitis capable of working at full capacity in ambient temperatures from –20° C to 30° C.
The skid frame is designed and approved according to DnV 2.7-1.
The complete unit is DnV approved according to nORSOk Z-015, ATEX and the unit carries the CE mark
The OTT vacuum unit is ideal for all types of cleaning and fluid transfer purposes.
ProduCts – VACUUM UnIT
extremely user-friendlyThe unit is extremely user-friendly and exceeds all relevant specifications. All equipment is built in to one container – one lift to the rig.
The unit is fully automatic; it will vacuum the waste material and evacuate the drop tank at the same time – continuous operation means cost effective.
The whole module is a one-piece containerized Single Pump Skid, rated at 725 BHP. This unit is designedspecifically for well servicing applications in Zone 2 areas
ProduCts – WELL SERVICE PUMP
A one-piece containerized single Pump skidThe unit is capable of working at full capacity in ambient temperatures from –10° C to 40° C. (45° C).
The skid frame is designed and approved according to DnV 2.7-1. The complete unit is DnV approved according to nORSOk Z-015, S-002, S-005, ATEX and the unit carries the CE mark. This unit meets the nORSOk 83 dBA max sound level requirements.
Personnel – A RELIABLE PROBLEM SOLVER
ott is providing personnel lease to the o&G industry, to assist in better planning and management of issues related to drilling waste control.
A reliable problem solverCapable personnel is handpicked for each position and we truly believe that a keen attitude is one of the main keys to our success. As the working conditions often are as demanding as the challenges we are solving, OTT personnel are as tough as they come. At the same time we are humble towards the seriousness of our trade and have a deep respect for the harsh but vulnerable elements involved.
Combined forcesCross disciplinary competence is fundamental to our business strategy. When applicable, we join our forces with groups and companies that have complementary competence to develop better tools and solutions.
teaming up with our clientsFeel free to present us with any challenge, and we will work with you until the problem is successfully solved.
Our workforce is dedicated to do what it takes and to use every available resource to solve a given task in the best possible way.
Personnel – A RELIABLE PROBLEM SOLVER
our PARTnERS – EXPERIEnCE AnD InnOVATIOn
ott has built strong partner relationships, each contributing their own special expertise, to provide our clients with the best possible service.
tAsK offers rental of solids control equipment, at competitive rates. Can also offer solids control equipment at favorable conditions, including a service contract for long-term projects.Web: www.task-es.com
sAs is the world’s leading independent supplier of unique micro emulsion crude oil sludge treatment products, tank cleaning solutions & waste treatment products.Web: www.surfaceactive.com
the msis Group is a market leader in the provision of environmental and waste management services to the Oil and gas, Utilities, Distilleries, Construction and Civil Engineering industries.Web: www.msisgroup.com
seasave offers a range of flexible and tried solutions that are designed for applications relating to collection, relocation, removal or deposit of sediment on the seafloor in addition to preventing the spread of contaminants in the water column or along the seafloor.Web: www.seasave.no
Fast Flow is leading the way in the pumping industry with new and revolutionary pump technology. From oilfield solids pumping, tank cleaning, to underwater jetting operations our products are quickly becoming the preferred tools of the trade.Web: www.fastflowpump.com
mosarric services is focussed on the delivery of Environmental Excellance within Oil & gas Drilling Operations through the provision of Independent Advice on the Handling, Storage, Transportation and Treatment of Oily Cuttings & Options for Waste Minimisation.Web: www.mosarricservices.com
OTT has built strong partner relationships, each contributing their own special expertise, to provide our clients with the best possible service.
our PARTnERS – EXPERIEnCE AnD InnOVATIOn
OTT has built strong partner relationships, each contributing their own special expertise, to provide our clients with the best possible service.
our PARTnERS – EXPERIEnCE AnD InnOVATIOn
iVAC industrial Vacuum systems provide portable and diverse units the world over. These industrial vacuum units units are capable of handling the most difficult of materials, and feature a unique delivery system as well as a powerful industrial vacuum.Web: www.industrialvacuumunit.com
blue manta international limited supply upper and lower completion kits, primarily on a rental basis, which include spooling units, baskets and containers, all of which are designed and manufactured to meet DnV 2.7-1 and En 12079 standards. Web: www.bluemanta.com
scottech oilfield services is the leading provider of filtration services and consumables, trusted for quality and performance throughout the Australian oil and gas community. Through the continual development of filtration technologies, Scottech is positioned to exceed our competitors and deliver measurable results across multiple production environments.Web: www.scottech.net.au
ContACt OnSITE TREATMEnT TECHnOLOgIES
service is always a given when dealing with us. more than 20 years of hands on experience makes us a valuable partner when planning new operations.
OTT invests and innovates to improve on excising procedures and technology for both on- and offshore applications.
ContACt – LOCATIOnS
Whether the project involves rental of our patented equipment or it includes both equipment and service, we make sure to be there for our clients.
ContACt – EMPLOyEES