Post on 14-Aug-2020
Stella® Mechanism
If you have a problem, question, or request, callyour local dealer, or Steelcase Line 1 at888.STEELCASE (888.783.3522)for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)Or visit our website: www.steelcase.com© 2015 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
®
Page 1 of 218678201 Rev F
(See page 2 for Lift and Lock Mechanism)
SS20 SE23
1
3
2
TRACK
SCREW
To Enable Positive Tilt:
Please make use of all appropriate hardware provided. Mounting screws are 5/8" in length for attaching track to a worksurface with a 3/4" thickness or greater.
UNDERSIDE OF DESKTOP
Slide mechanism into track.
Insert end cap.
END CAP
SCREW
Secure end cap with the two (2) machine screws provided.
TILTLOCK-OUTSLEEVE
STORAGE POST
TILT ROD
A Remove Tilt Lock-out Sleeve from Tilt Rod.
B Snap Tilt Lock-out Sleeve onto Storage Post.
MECHANISM
L5 23
5" Arm / 23" Track
L7 26
7" Arm / 26" Track
Page 2 of 218678201 Rev F
®
Please make use of all appropriate hardware provided. Mounting screws are 5/8" in length for attaching track to a worksurface with a 3/4" thickness or greater.
1
3
Slide mechanism into track.2
NOTE: Orient track so holes align with channels on Series 9000 top.
MECHANISM
TRACK
SCREW
SCREW
END CAP
Insert end cap and secure with the two (2) machine screws provided.
UNDERSIDE OF DESKTOP
Attach keyboard platform (not shown) to mechanism using the hardware provided.
Lift and Lock Mechanism
TILT LOCK-OUT WASHER
To Enable Full Tilt Function:A Unscrew tilt lock-out knob from mechanism.
B Remove and flip over the Tilt Lock-out Washer then reassemble components as shown.
TILT LOCK-OUT KNOB