Post on 04-Oct-2021
www.franke-commercial.com61562 | SPECIFICATIONS | UPDATED 2016
USA: 1-855-526-0503 | commercial-info.us@franke.com
SPECIFICATIONS PACKAGE UPDATES (inserts for printed package #61562)Revisions are indicated in the footer showing the month/year of the change. Revisions to date include these chapters:
GENERAL INFORMATION (Tab # 1)Several pages updated
dOubLE TOpMOuNT sINks (Tab # 3)(REPLAC EMENT FOR THE ENTIRE SECTION)99 D6408-1 Removed bowl bracket from drawing100 D8610-1 Removed bowl bracket from drawing101 D6410PCB-1 Drawing updated. No H bracket or spillway102 ALBDC182605P-1 This model uses Easy Claw bracket104 ALBD6405-1 Removed bowl bracket from drawing105 LBD6407-1 Removed bowl bracket from drawing106 LBD6408-1 Removed bowl bracket from drawing107 LBD6808-1 Removed bowl bracket from drawing108 LBD7508-1 Removed bowl bracket from drawing109 ALBD1305P-1 Removed bowl bracket from drawing110 ALBD1306P-1 Removed bowl bracket from drawing111 ALBD1308P-1 Removed bowl bracket from drawing112 ALBD4405P-1 Removed bowl bracket from drawing113 ALBD4406P-1 Removed bowl bracket from drawing114 LBD4408P-1 Removed bowl bracket from drawing115 LBD4410P-1 Removed bowl bracket from drawing116 ALBD6405P-1 Removed bowl bracket from drawing117 ALBD6406P-1 Removed bowl bracket from drawing118 LBD6408P-1 Removed bowl bracket from drawing120 ALBD7505P-1 Removed bowl bracket from drawing121 ALBD7506P-1 Removed bowl bracket from drawing122 LBD7508P-1 Removed bowl bracket from drawing123 LBD7510P-1 Removed bowl bracket from drawing124 LBD7412P-1 Removed bowl bracket from drawing
TRIpLE TOpMOuNT sINks (Tab # 3)(REPLACEMENT FOR THE ENTIRE SECTION)126 T6410PCB-1 Removed bowl brackets from drawing127 T8610-1 Removed bowl bracket from drawing128 LBT6407CB-1 Removed bowl bracket from drawing129 LBT6410PCB-1 Removed bowl bracket from drawing130 LBT8607-1 Removed bowl bracket from drawing131 LBT8610P-1 Removed bowl bracket from drawing
uNdERMOuNT sINks (Tab #6)169-A UCS6105P-1 New sink added
VANITY bAsINs (Tab #7) If you have a printed package, remove the divider and all
content pages as this product range is no longer available
sCuLLERY-OTHER (Tab #10) (REPLACEMENT FOR THE ENTIRE SECTION)
203-226-C Obsolete sculleries removed. New 2015 models added.
HOspITAL & LAbORATORY (Tab #11)235 SSU1++ Drawing now updated with missing bowl measurement243 AWHB1414P-00 Addition of wheelchair accessible statement252-A HWS6810P-3 NEW product252-B HWS0610P-3 NEW product
wAsH bAsINs (Tab #12)270 WHB2221-UC Change to description for clarity271 WHB5222-7 Drawing measurement correction from center to
faucet hole of 18" (457 mm), plus note added about related product WHB5222-RS
TYpE 316 LAbORATORY (Tab #14)305 S6810/316P-3 Correction now made to model name at top 308 LBS9407/316P-3 Duplicate page 308 removed320 D6410/316PCB-1 Drawing updated322 LBD6408/316P-1 Drawing updated323 LBD6410/316PCB-1 Drawing updated
wAsHROOM ACCEssORIEs (Tab #16)365 ESD80BOTTLE1 New spare part for SD80 series390 F850-1824/30/36, F850-2430/36 391 F3200-1824/30/36, F3200-2430/36392 F3200FT-1630/1830/1836/2436393 F3300-1824/1830/2436Inclusion of addtional measurements, Correction to product series name in header to F3300++
sECuRITYwARE (Tab #17)
dRINkING FOuNTAINs (Tabs #18-23)If you have a printed package, remove the divider and all content pages as these product ranges are not available in the U.S.
***** FINAL COMMENT*****Not all models are certified at this time so specs will be
created once we have certifications. HWS-RS-00, HWSW2420-3, WHB5222-RS to come
www.franke-commercial.com61562 | SPECIFICATIONS | UPDATED 2016
USA: 1-855-526-0503 | commercial-info.us@franke.com
2015 dELETIONs
1038HWS1518P-00LBD6407/316P-1LBD6407/316P-1/1LBD6407/316P-1/3LBD6407/316P-1/4LBS4607/316P-3LBS4607/316P-3/1LBS4607/316P-3/3LBT8607-1
LBT8607-1/1LBT8607-1/3OF100OV1619/5OV1619/6OV1821/5OV1821/6OV19/5RC5/316S6407/316P-3
V1619/5V1619/6V1821/5V1821/6V19/5V19/5DV19/6WHBS161709 modelsXINX models
2016 dELETIONsThe following items starting with 2016 deletions are now obsolete with no inventory remaining.
CMPX150CMPX560LBS4610/316P-1/2LBS4610/316PC-3/2LBS6407/316P-3LBS6407/316P-3/1LBS6407/316P-3/3All MT modelsOV19/6RODX650 to 654RODX687XINV700SSL2424-5SSL2424-5/2SSL2424R-5SSL2424R-5/2SSL2424L-5SSL2424L-5/2SSL2424LR-5SSL2424LR-5/2SSL2430-1SSL2430-1/2SSL2430-5SSL2430-5/2SSL2436-1SSL2436-1/2SSL2436-5SSL2436-5/2
SDL2430-1SDL2430-1/2SDL2430-5SDL2430-5/2SDL2436-5SDL2436-5/2SDL2442-1SDL2442-1/2SDL2442-5SDL2442-5/2SDL2442LR-1SDL2442LR-1/2SDL2442LR-5SDL2442LR-5/2SDL2448-5SDL2448-5/2SDL2448LR-5SDL2448LR-5/2STL2445-1STL2445-1/2STL2445-5STL2445-5/2STL2454-5STL2454-5/2STL2472-5STL2472-5/2RSL2418-5RSL2418-5/2
RSL2418R-5RSL2418R-5/2RSL2418L-5RSL2418L-5/2RSL2418LR-5RSL2418LR-5/2RDL2436-5RDL2436-5/2RDL2436R-5RDL2436R-5/2RDL2436L-5RDL2436L-5/2RDL2436LR-5RDL2436LR-5/2RTL2454-5RTL2454-5/2RTL2454R-5RTL2454R-5/2RTL2454L-5RTL2454L-5/2RTL2454LR-5RTL2454LR-5/2WSL2424-5WSL2424-5/2WSL2424R-5WSL2424R-5/2WSL2424L-5WSL2424L-5/2
WSL2424R-5WSL2424LR-5WSL2424LR-5/2WSL2430-1WSL2430-1/2WSL2430-5WSL2430-5/2WSL2436-1WSL2436-1/2WSL2436-5WSL2436-5/2WDL2448-5WDL2448-5/2WDL2448R-5WDL2448R-5/2WDL2448L-5WDL2448L-5/2WDL2448LR-5WDL2448LR-5/2WDL2460-1WDL2460-1/2WDL2460-5WDL2460-5/2WDL2472-1WDL2472-1/2WDL2472-5WDL2472-5/2WTL2445-1
WTL2445-1/2WTL2445-5WTL2445-5/2WTL2454-5WTL2454-5/2WTL2472-5WTL2472-5/2WTL2472R-5WTL2472R-5/2WTL2472L-5WTL2472L-5/2WTL2472LR-5WTL2472LR-5/2
2014 dELETIONsD6410/316PCB-3CMPX538WFCMPX538WF-RDHC-1W-18PHC-1W-36PHC-1W-30PHC-1W-24PHC-1W-3030PLBLDC1737P-1LBLDC1737P-1/1LBLDC1737P-1/2LBLDC1737P-1/3LBLDC1943P-1LBLDC1943P-1/1LBLDC1943P-1/2LBLDC1943P-1/3LBRDC1737P-1LBRDC1737P-1/1LBRDC1737P-1/2LBRDC1737P-1/3LBRDC1943P-1LBRDC1943P-1/1
LBRDC1943P-1/2LBRDC1943P-1/3M1216M1224M2449ALBS6805/316-1ALBS6805/316-1/1ALBS6805/316-1/3LBD6407/316-1LBD6407/316-1/1LBD6407/316-1/3LBD6407/316-1/4LBD6408/316-1LBD6408/316-1/1LBD6408/316-1/3LBD6408/316-1/4LBS4607/316-1LBS4607/316-1/1LBS4607/316-1/3LBS4607/316-3LBS4607/316-3/1LBS4607/316-3/3
LBS6407/316-1LBS6407/316-1/1LBS6407/316-1/3LBS6407/316-3LBS6407/316-3/1LBS6407/316-3/3LBS6807/316-1LBS6807/316-1/1LBS6807/316-1/3LBS6808/316-1LBS6808/316-1/1LBS6808/316-1/3LBS6810/316-1LBS6810/316-1/1LBS6810/316-1/3LBS6810/316-3LBS6810/316-3/1LBS6810/316-3/3LBS9407/316-1LBS9407/316-1/1LBS9407/316-1/2LBS9407/316-3
LBS9407/316-3/1LBS9407/316-3/2LBSDBL6810/316-1LBSDBL6810/316-1/1LBSDBL6810/316-1/3LBSDBR6810/316-1LBSDBR6810/316-1/1LBSDBR6810/316-1/3S6407/316-1S6407/316-3S6808/316-1S6810/316-1S6810/316-3S9106/316-1S9106/316-3S9407/316-1S9407/316-3
www.franke-commercial.com61562 | SPECIFICATIONS | UPDATED 2016
USA: 1-855-526-0503 | commercial-info.us@franke.com
Commercial Products
SPECIFICATIONSUPDATED April 2016
1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Product Certification, Nomenclature Guide, Limited Buyer Warranty, Corrosion Resistance Information, Waste Fitting Options , Hole Drilling Configuration Charts, Custom Fabrication Instructions, Franke Innovations
2 Single Compartment Topmount Sinks . . . . . . . . . . . . . . . . . . 17Ledgeback and No Ledge, 18 & 20 Gauge
3 Double Compartment Topmount Sinks . . . . . . . . . . . . . . . . . 98Ledgeback and No Ledge, 18 & 20 Gauge
4 Triple Compartment Topmount Sinks . . . . . . . . . . . . . . . . . . 126Ledgeback and No Ledge, 18 & 20 Gauge
5 Classroom Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13218 Gauge Single Sinks, Art Room Sinks and Childen’s Wash ‘n Play Washino Sinks
6 Undermount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16618 Gauge, Single and Double Compartment
7 Chapter 7 (Vanities) of the printed specifications package do not apply for USA customersIf you have a printed specification package, remove vanities divider and trash contents of this chapter which do not apply to USA customers any longer
8 Drainboard Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193Single and Double Compartment, Right and Left Hand Models
9 Scullery Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Single, Double & Triple Compartment Classic Sculleries
Table of Contents
Specifications and measurements are subject to change with updates to product design . Visit our website for updates .
www.franke-commercial.com 161562 | SPECIFICATIONS | UPDATED 2016
USA: 1-855-526-0503 | commercial-info.us@franke.com
10 Scullery - Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203S Series Service Sculleries, R Series Restaurant Sculleries, and W Series World Class Sculleries
11 Hospital and Laboratory Sinks . . . . . . . . . . . . . . . . . . . . . . . 227Canadian Health Care Facilities Test Report, Premium, Single, Double and Triple Basins, With and Without SANIGUARD® Product Protection, Product Accessories
12 Wash Basins & Trough Sinks . . . . . . . . . . . . . . . . . . . . . . . . . 253Designer Wash Basins, Clinical Hand Wash Basins, Wall Hung Hand Wash Basins and Troughs, and a Pedestal Wash Basin
13 Utility Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281Corrosion Resistant Floor Mount Mop Sinks, Anti-splash Rim Sewage Sampling Sinks, Trough Sinks, Round and Rectangular Sacrarium Sinks
14 Type 316 Laboratory Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . 296Type 316 Corrosion Resistant Topmount Sinks, Undermount Sinks, Drainboard Sinks, Cup Sinks, Sculleries, Art Sinks, and Wall Hung Basins
15 Urinals and Toilets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344Low Flush Stainless Steel Urinal and Toilets
16 Washroom Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349Robust Rodan Stainless Steel and EXOS Glass Front Accessories, Clothing and Curtain Hooks, Curtains and Stainless Steel Grab Rails
17-23 Chapters 17-23 of the printed specifications package do not apply for USA customersRemove dividers and trash the contents of these 7 chapters
24 Quick Find Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393Terms Alphabetized Quick Find Guide
Specifications and measurements are subject to change with updates to product design . Visit our website for updates .
61562 | SPECIFICATIONS | REV.2016 3
USA: 1-855-526-0503 | commercial.info.us@franke.com
www.franke-commercial.com
PRODUCT CERTIFICATION
Franke is committed to product certification. We strive to have all our products designed and certified to meet all applicable standards.
Certification marks are important as they offer peace of mind to installers, specifiers and consumers alike that the product has
been independently tested and certified to meet the recognized standards for safety and/or performance, of the recognized certification bodies in North America.
IAPMO (International Association of Plumbing and Mechanical Officials), NSF, UL (Underwriters Laboratories) and CSA (Canadian Standards Association) are among the leaders for Standards Development Organizations in North America. These organiza-tions are accredited by ANSI American National Standards Institute (ANSI) and Stan-dards Council of Canada (SCC) to certify plumbing fixtures.
461562 | SPECIFICATIONS | REV.2016
DrainboarD SinkS
LBSDBR Ledge back single with drainboard on right side LBDDBR Ledge back double with drainboard on right sideLBSDBL Ledge back single with drainboard on left side LBDDBL Ledge back double with drainboard on left side Scullery SinkS
SL Classic Series, single compartment RSL R-Series, single compartmentDL Classic Series, double compartment RDL R-Series, double compartmentTL Classic Series, triple compartment RTL R-Series, triple compartmentSSL S-Series, single compartment WSL W-Series, single compartmentSDL S-Series, double compartment WDL W-Series, double compartmentSTL S-Series, triple compartment WTL W-Series, triple compartment
oTHer
UCS Undermount single sink WSS Wall hung service sinkUCD Undermount double sink FSS Floor service/mop sinkSSU Surgical scrub station SSS Sewage sampling sinkWHB Wall hung hand wash basin RS/SS Sacrarium sinkFWHB Pedestal hand wash basin OC6/RC6 T316 cup sinkWT Wall hung basin CMPX UrinalWTS Wall trough sink
claSSroom SinkS
LBLS Ledge back & left, single compartment LHS Opposing ledges, left & right only, single compartmentALBLS Wheelchair accessible/ADA compliant ledge back & left ,
single compartmentALHS Wheelchair accessible/ADA compliant,
opposing ledges,left & right only, single compartmentLBRS Ledge back & right, single compartment LRS Ledge right side only, single compartmentALBRS Wheelchair accessible/ADA compliant ledge back & right,
single compartmentALRS Wheelchair accessible/ADA compliant,
ledge right side only,single compartmentLBLRS Ledge back, left & right, single compartment LBLDC Ledge back & left, double compartmentALBLRS Wheelchair accessible/ADA compliant,
ledge back,left & right, single compartmentLBRDC Ledge back & right, double compartmentART Large artroom single sink without faucet ledge
EXAMPLE: Single, Classroom, Double, Triple and Undermount Sink
Model Sink / Bowl Configuration Bowl Dimensions Gauge Waste Option
With or Without ledge?
SingleDouble,Triple?
Width(Front
to back)
length(left
to right)
Depth
lbS6808-2 lb(Ledge Back)
S(Single bowl)
6(16")
8(18")
08(8")
*(20 ga)
-2 (3 ½" [89mm] crumb cup with integral overflow)
lbT8610P-1 lb(Ledge Back)
T(Triple bowl)
8(18")
6(16")
10(10")
P(18 ga)
-1 (3-1/2" [89mm] crumb cup)
lbS9407-3 lb(Ledge Back)
S(Single bowl)
9(9 1/2")
4(14 1/2")
07(7")
*(20 ga)
-3 (1-1/2" [38mm] duplex waste assembly)
lblS4608P-1 lbl(Ledge Back & left)
S(Single bowl)
4(14")
6(16")
8(8")
P(18 ga)
-1 (3-1/2" [89mm] crumb cup)
* 20 gauge unless otherwise indicated by the letter "P" for single, classroom, double, triple & undermount sinks
WaSHroom acceSSorieS
ACG Corner guard QC 1-1/4" diameter concealed flange grab barCH Curtain hook RODX Rodan series with satin finishCM Back rest with anchoring covers SD Soap dispenserCR Curtain rod STRX Stratos series garmet hook with satin finishCV Curtain - vinylEXOS Complimentary product range
General Information 2016Nomenclature Guide - Sinks and Washroom Fixtures
DroP-in SinkS
S Single sink without faucet ledge D Double sink without faucet ledgeLBS Ledge back single sink LBD Ledge back double sinkAS Wheelchair accessible/ADA compliant single sink
without faucet ledgeT Triple sink without faucet ledge
ALBS Wheelchair accessible/ADA compliant ledge back single sink LBT Ledge back triple sink
561562 | SPECIFICATIONS | REV.2016
Products are warrantied against manufacturer's defects.
If a product is defective for normal purposes Franke Commercial will provide to the buyer free of charge a replacement product of equal model. A product can be repaired or replaced by returning it to the place of pur-chase. All costs of such replacement shall be borne by the buyer.
Franke Commercial shall not be liable under this warranty where the product has been used for abnormal purposes or improperly installed or has damage resulting from abuse such as heavy impact, dropped objects or otherwise. Franke Commercial shall not be liable for any inconven-ience or expense for material or labour related to removal or replacement of the defective product, or for any loss or damage to any person or property whatsoever resulting from the defective product.
The provisions of this warranty are not transferable and are in addition to and not in modification of or subtraction from any applicable statutory warranties, rights or remedies.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This warranty gives specific legal rights, and you may also have other rights which vary from province to province (or state to state).
Warranty overview
- Stainless steel topmount sinks and hand wash basins 5 year warranty
- EXOS Miranit resin-bonded mineral material wall mount sinks 2 year warranty
- Stainless steel Rodan and Exos washroom accessories 5 year warranty, with exception of soap dispensers and electronic parts - 2 years
- Miscellaneous washroom accessories, ie) grab rails, curtain hooks, 1 year warranty
- Stainless steel urinals 2 year warranty
- Custom and fabricated products, including sculleries, mops, sewage sampling sinks 1 year warranty
- Drain fittings and waste parts 1 year warranty
LIMITED BUYER WARRANTY
every Franke commercial sink is guaranteed to be suitable for any normal purpose for which it is intended and without defects in material or workmanship for the following periods of time, provided is has been installed and maintained according to Franke commercial instructions.
661562 | SPECIFICATIONS | REV.2016
Substance (Conditions - strength & temperature) T316 T304 T302
Acetic Anhydride (90%, aerated, 180 degrees F) B C C Aluminum Fluoride (5%, 70 degrees F) B C C Aluminum Sulfate (10%, boiling) A B B Ammonium Bromide (5%, 70 degrees F) B C C Ammonium Sulfate (10%, boiling) A B B Bleaching Powder (dry) A C C Butyric Acid (saturated, boiling) A B B Calcium Bisulfite (aqueous solution, 300 lbs. pressure, 390 degrees F) B C C Calcium H droxide (50%, boiling) B C C Calcium Hypochlorite (saturated, 70 degrees F) A C C Chloracetic Acid (70 degrees F) B C C Chlorine Gas (moist, 70 degrees F) B C C Chromic Acid (50%, boiling) B C C Ferric Chloride 1%, 70 degrees F) B C C Fluosilicic Acid 90%, 70 degrees F) B C C Formic Acid (10%, 180 degrees F) A C C Hydrochloric Acid (1% or less, 70 degrees F) B C C Iodine (dry, 70 degrees F) A C C Lactic Acid (10%, 150 degrees F) B C C Mercuric Chloride (2%, 70 degrees F) B C C Oxalic Acid (2.5%, 180 degrees F) A C C Phosphoric Acid (80%, 230 degrees F) B C C Salt Brine (70 degrees F) A C C Sauerkraut Brine (70 degrees F) A C C Sodium Hydroxide (melting, 600 degrees F) B C C Stannic Chloride (5%, 70 degrees F) B C C Sulfuric Acid (5%, 100 degrees F) A C C Zinc Chloride (saturated, 70 degrees F) B C C
In the presence of oxygen, stainless steel forms a protective chromium oxide layer. This is due to the addition of chro-mium in excess of 11.5% during the alloying stage. The further addition of nickel, in excess of 7%, gives superior corrosion resistance to the 300 series.
Maximum corrosion resistance is obtained with the addition of molybdenum to form TYPE 316, designed to resist attack under highly corrosive conditions.
As implied, stainless steel requires oxygen in order to be stainless. There are ways to make oxygen more plentiful. For example, an acid solution which might otherwise corrode the steel, can be aerated to maintain the protective film.
Corrosion, or rusting, often reported soon after installation, has two main causes:
- Contact Corrosion occurs when a piece of common carbon steel, copper, brass or other foreign material contacts the sink and destroys the passive protective film.
- Pitting or Pinhole Corrosion occurs when chlorides attack the steel forming pits where galvanic cells are created. Acid chlorides are particularly severe, but even chlorine bleach can cause failure. The sink should be rinsed thoroughly after such contact. Type 316 steel should be specified if the sink will be subject to such conditions.
Chemical DataThe chemical data below should be used as a guide to determine the type of stainless steel that will be appropriate for the application. The rating system denotes the level of resistance to corrosion for the different types of stainless steel (A = fully resistant, B = fairly resistant, C = not resistant).
For applications involving chemicals or conditions not listed below, please consult your local Franke Commercial sales representative. The following information is also available on our website at: http://www.franke-commercial.com
General InformationCorrosion Resistance Information
61562 | SPECIFICATIONS | REV.2016 7
USA: 1-855-526-0503 | commercial.info.us@franke.com
www.franke-commercial.com
MODEL DESCRIPTION
3.5" WASTES3-1/2" (89mm) crumb cup basket strainer with 1-1/2 x 3" (38 x 76 mm) brass tailpiece. certified to aSme a112.18.2-2005/cSa b125.2-2005.
1120/316 Twist seal crumb cup, T316 steel for enhanced corrosion resistance
1130 Easy Seal® crumb cup, T302 steel
1130/60 Case lot - 60 units, Easy Seal® crumb cup with tailpieces
1140 ♦ Pull up crumb cup, T304 steel
1140/60 ♦ 60 pack of 1140 pull up basket strainers
WaSTe FiTTinG: 3-1/2" (89mm) vandal resistant grid stainless steel strainer and tailpiece
1300G Type 302 stainless steel
1200/316G Type 316 (EN1.4401 17/12/2) steel for enhanced corrosion resistance
1.5" WASTESDuPleX WaSTe: 1-1/2" (Dn38) x 3" (76.2 mm) tailpiece and rubber stopper
100 Type 302 (CNS 18/8) stainless steel strainer and tailpiece
200/316Type 316 (EN1.4401 17/12/2) stainless steel strainer and type 316 tailpiece with rubber stopper
PerForaTeD GriD only
100-1/302 Strainer for 1-1/2" drain
VanDal reSiSTanT GriD STrainer WiTH 1-1/2" x 3" (38x76.2mm) TailPiece
100-NR Type 302 (CNS 18/8) stainless steel, with brass tailpiece
200/316-NRType 316 (EN1.4401 17/12/2) stain-less steel, with type 316 stainless steel tailpiece
1.25" WASTES
GriD STrainer: 1-1/4" (32mm) with removable tailpiece. aSme a112.18.2-2005/cSa b125.2-2005
125GWK 1-1/4" Grid strainer, no overflow
125GOWK 1-1/4" Grid strainer, with overflow
125GWK-MOD 1-1/4" Grid strainer for WHB5222, no overflow
♦ New Product
MODEL DESCRIPTION
WASTE FITTING REPLACEMENT PARTS
310-1 10" Standpipe for 1-1/2" wastes, type 304 (18/10) stainless steel
312-1 12" Standpipe for 1-1/2" wastes, type 304 (18/10) stainless steel
315-7 Tailpiece locknut
315-8 Tailpiece gasket
1047 Integral Waste Assembly
WaSTe FiTTinG: 1-1/2" x 3" (38mm x 76mm) tailpiece, type 316 (en1.4401 17/12/2) stainless steel
315-9 Brass tailpiece
315-9/316 Type 316 (EN1.4401 17/12/2) stainless steel tailpiece
WHB5222-PW ♦Pyramid shaped waste for WHB5222 basin
General InformationWASTE FITTING OPTIONS for Sinks and Wash Basins
61562 | SPECIFICATIONS | 2014 8
USA: 1-855-526-0503 | commercial.info.us@franke.com
www.franke-commercial.com
ø1 1/2"(38mm)
ø1 1/2"(38mm)
4" (102mm)
SINGLE LEDGEBACK
/1 /21 hole 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/33 hole, 8" centerset
ø1 1/2" (38mm)
ø1 1/2" (38mm)
DOUBLE LEDGEBACKø1 1/2"(38mm)
8" (204mm)
/1
/31 hole 3 hole, 8" centerset
/43 hole, 8" centerset, plus 1 hole 4" to the right
12" (306mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
TRIPLE LEDGEBACK
ø1 1/2"(38mm)
8" (204mm)
/1
/3
1 hole
3 hole, 8" centerset
/43 hole, 8" centerset, plus 1 hole 4" to the right
12" (306mm)
General InformationHole Drilling Configurations - Single, Double and Triple Sinks
961562 | SPECIFICATIONS | REV.2016
CLASSROOM - LBLDC1743P-1 SERIES
ø1 1/2" (38mm)
/2 /4
CLASSROOM - LBRS SERIES
3 hole, 8" centersetbubbler hole on right ledge
1 holebubbler hole on right ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
1 hole 2 hole, 4" centerset 3 hole, 8" centerset
1 hole diagonal punching 1 hole diagonal punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
CLASSROOM - LHS SERIES
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
bubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
CLASSROOM - LBLS SERIES
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
CLASSROOM - LRS SERIES
/33 hole, 8" centerset
/11 hole
/22 hole, 4" centerset
ø1 1/2"(38mm)
4"(102mm)
ø1 1/2"(38mm)
8"(204mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/5R/3R2 single holes 3 hole, 8" centerset, 1 hole left
bubbler hole right ledgebubbler hole right ledge
CLASSROOM - LBLR SERIESø1 1/2"(38mm)
8" (204mm)
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
/5L/3L2 single holes 3 hole, 8" centerset, 1 hole right
bubbler hole left ledgebubbler hole left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3 3 hole 8" centerset
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
3 hole 8" centerset
CLASSROOM - LBRDC1943P-1 SERIES
ø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/2"(38mm)
3 hole 8" centerset
CLASSROOM - LBRDC1743P-1 SERIESø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
3 hole 8" centerset
CLASSROOM - LBLDC1943P-1 SERIESø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
General InformationHole Drilling Configurations - Classroom Sinks
1061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Custom fabriCation Capabilities
Modifications can be made to most of our standard catalogue products. We offer a wide range of custom products. Franke has full custom stainless steel fabrication capabilities for commercial product. We are happy to custom fabricate products to meet your specifications.
- Countertops- Topmount & Undermount Sinks- Drainboard Sinks- Scullery Sinks- Wallmount Hand Wash Stations- Surgical Scrub Stations- Janitorial Mop Sinksor .....
All of our custom fabricated products are polished to a #4 satin finish and can be made to meet the material specifica-tion you require (T304 or T316, 14 to 18 gauge). Continuous weld construction is available for pharmaceutical applica-tions if required.
If you can sketch it, we can build it.
As a general rule of thumb, the more information we receive with custom fabricated product requests, the better!
The following pages provide explicit details for requesting specific types of custom fabricated products.
SANIGUARD® Product ProtectionThe addition of SANIGUARD® product protection is available for sinks in this catalogue as well as custom fabricated sinks. However, we only recommend this coating be added to hand wash basins. See our SANIGUARD® Information page for more details about this product protection. For a quotation please call or email our Customer Service Manager, Tracy Irvine.
1-855-526-0503commercial-info.us@franke.com
1161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
application
□ Drop-In □ Undermount
With faucet ledge:
□ Yes □ No
sinK boWl #1Compartment size
Front-to-Back: Left-to-Right
Depth Position (if multiple bowls)
Drain fitting: □ 3 1/2" (includes 1130 waste fitting)
□ 1 1/2" (includes 100 waste fitting)
□ 1 1/4" (accepts 1 1/4" drain, not included)
□ Other
note: Type 316 wastes are supplied with Type 316 sink bowls.
Drain position: □ Center □ Center-Back
□ Back-Right □ Back-Left
additional Drain options:
□ Integral Overflow
□ Standpipe (1 1/2" drains only)
□ Standpipe & Corner Guard (1 1/2" drains only)
Drainboard:
Is a sloped drainboard required:
□ None □ Left
□ Right □ Left & Right
Note: Drainboard measures 21" left to right.
overall Dimensions
Allow a minimum of 1" for rims
Allow a minimum of 4" for faucet ledge
Front-to-Back: Left-to-Right:
Faucet Hole Drilling Requirements:
note: Please include the location of the holes, the number of holes required and the diameter of the holes. Provide a sketch if necessary.
builD Your sinK
sinK boWl #2 (if required)Compartment size
Front-to-Back: Left-to-Right
Depth Position (if multiple bowls)
sinK boWl #3 (if required)Compartment size
Front-to-Back: Left-to-Right
Depth Position (if multiple bowls)
type of stainless steel □ T304 □ T316
steel Gauge □ 18 □ 16 □ 14
□ Other
bowl radius:
Only 1" bowl radius is available.
bowl specs & Drainboard options ChecklistCustom fabrication
1261562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
tops are available in all sizes and configurations, with sink bowls integrally welded into the top. tops may be flat or slope to the sink. all sloped tops have a 6mm drop to the sink bowl.
a. tHe sinK Compartment speCifiCations:Compartment size
Front-to-Back: Left-to-Right
Depth Position (if multiple bowls)
type of stainless steel □ T304 □ T316
steel Gauge □ 18 □ 16 □ 14
□ Other
Drain fitting □ 3 1/2" (includes 1130 waste fitting)
□ 1 1/2" (includes 100 waste fitting)
□ 1 1/4" (accepts 1 1/4" drain, not included)
□ Other
note: Type 316 wastes are supplied with Type 316 sink bowls.
Drain position □ Center □ Center-Back
□ Back-Right □ Back-Left
additional Drain options
□ Integral Overflow
□ Standpipe (1 1/2" drains only)
□ Standpipe & Corner Guard (1 1/2" drains only)
b. tHe Countertop Details:The position of the sink compartments will be centered horizontally unless specified otherwise.
Top should be: □ Flat □ Slope to the sinknote: the maximum sloped area that can be created from the sink bowl outward is 32" (81cm). The remaining top surface to the edge of the sink will be flat.
backsplash Location(s): □ Back □ Left □ Right
Backsplash Height(s):
Backsplash Style (see Custom Sink Options page)
rim style (see Custom Sink Options page)
overall Dimensions of the top
Allow a minimum of 2" for rims.
Allow a minimum of 1 1/2" for splashes.
Allow a minimum of 4" for faucet ledge.
Front-to-Back:
Left-to-Right:
top is to be installed onto
□ Cabinet - existing or supplied by others
□ Cabinet - to be supplied by Commercial Systems (please provide sketch)
□ Legs material: □ Stainless Steel □ Chrome Plated
□ Wall with wall hanger and wall mount brackets
Dimension from floor to work surface:
Core material □ Particle Board
□ Plywood
□ Channel Construction
□ Other (specify)
Any other information or requirements should be provided in the form of a sketch with written detail. We will review all requests and request clarification if required.
Custom Countertop CHeCKlistCustom fabrication
1361562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
a. tHe sinK Compartment speCifiCations: Compartment size
Front-to-Back:
Left-to-Right:
Depth:
# of Compartments required:
type of stainless steel □ Type 304
□ Type 304, all radius coved corners
□ Type 316
steel Gauge □ 18 □ 16 □ 14
□ Other (specify)
Drain fitting □ 3 1/2" (includes 1130 waste fitting)
□ 1 1/2" (includes 100 waste fitting)
□ 1 1/2" duplex complete with stand pipe and guard
□ 1 1/4" (accepts 1 1/4" drain, not included)
□ Other (specify)
note: Type 316 wastes are supplied with Type 316 sink bowls.
in addition to our standard scullery sinks, we offer scullery sinks fabricated to your specification.
Custom scullery CHeCKlistCustom fabrication
b. tHe DrainboarD speCifiCations:Drain position □ Center □ Center-Back
□ Back-Right □ Back-Left
Drainboard
note: Drainboard measures 21" left to right.
Is a sloped drainboard required? □ None □ Left
□ Right □ Left & Right
What type of edges (rims) are required?
# of edges (considering number of backsplashes):
□ Standard 1 5/8" rolled edges
□ Other Type:
Dimensions:
backsplash
Backsplash Location(s): □ Back □ Left □ Right
Backsplash Height(s):
Backsplash Style:
overall Dimensions of the top
Front-to-Back:
Left-to-Right:
legs □ Stainless Steel □ Chrome Plated
leg Height □ Standard 35" Other (specify)
faucet Hole Drilling requirementsPlease include the location of the holes, the number of holes required and the diameter of the holes. Provide a sketch if necessary.
1461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Rim Style OptionsBack / Side Splash Options
( "
Custom Sink OptionsCustom Fabrication
1561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
For customization of any of our standard catalogue products, please provide us with a sketch or a copy of our specification sheet indicating all changes and modification required.
Service Sinks
Sewage Sampling Sinks
Mop Sinks
Pedestals/Wall Hung Basins
Wall Mount Trough Sinks
Other Custom ProductsCustom Fabrication
3. ELIMINATES AREAS FOR BACTERIA TO GROW
The sink is coated with an antimicrobial surface treatment called SANIGUARD®, which
incorporates silver ion technology helping reduce the spread of harmful bacteria. SANIGUARD® is applied to the sink by a powder coating process.
Side splash guards prevent water from splashing outside unit.
No flat surfaces on which water can collect.
Faucet ledge is sloped to reduce free-standing water.
Target area for hand washing to contain splashing water within unit. Sink depth is 10" (254 mm).
Not only is the sink bottom sloped positively to be free draining, but the entire basin is free of concealed areas allowing for easy cleaning of exposed surfaces; further eliminating areas for harmful bacteria to collect.
2. CONTAINS SPLASHING and ELIMINATES FREE STANDING WATER
This HWS1420P-00 comes complete with a 26½" (673 mm) high backsplash to which a soap dispenser and paper towel dispenser would be mounted. This backsplash also negates the need for an additional splashguard mounted behind the sink.
1. ROBUST STAINLESS STEELAn incredibly durable product, yet it lightweight.
canada'S 1St & only z8000 comPliant Hand Hygiene Sink SeRieS
4. EASY and EFFICIENT TO INSTALLA separate wall carrier is not required for installation. It is quick and easy; perfect for multiple room installations.
3. Continued.....The sink also incorporates a special waste design. The waste is an integral 1 ½" waste (DN40) hole with integrally welded tailpiece that will not accept a standard waste plug, effectively eliminating an area for bacteria to collect. The waste is positioned in the left-rear so that water does not splash directly into the waste.
FRanke innoVationSat FRanke kindRed canda limited
HWS1420P-1 Introduced 2011
HWS1414P-00
HWSS1518P-00
16-a61562 | SPECIFICATIONS | REV.2016
All new for 2014, Franke EZ TORQUE™ fasteners will ship pre-installed on the sink! The simplicity of this method almost eliminates the need for instructions. It is no longer necessary to read where to fasten the clips onto the sink. Missing clips are no longer an issue and the sink drops quickly and neatly into the cut-out. The fastener's red colour makes it easy to locate inside the cabinet. It’s patented and revolutionary design allows you to tighten the clips with one hand through the entire installation process. That’s it, installing a sink with EZ Torque is quick and easy.
The Franke EZ TORQUE™ is a robust design with steel componentry, and high-performance polymer resin which unite together to produce a fastener superior in strength and performance to its predecessor.
Franke EZ TORQUE™ fasteners are used to hold the rim of the sink ledge tight to the countertop. This new method replaces the industry standard’s universal mounting system which hasn’t changed much over the past thirty years. The long standing tradition has been for an installer to hang the supplied fasteners at specified locations around the sink ledge as indicated in the instructions. Although fasten-
ers and instructions are included within the product box, on occasion items go missing on the job site which can negatively impact the process. The sink and clips must be carefully
lowered through a cut-out hole in the coun-tertop. The fastening clips dangle loosely
on the sink requiring careful manipula-tion to ensure none are knocked off in
the process. Once in place a drill is held in one
hand while the other is used to locate and steady each clip from underneath to tighten. This method is somewhat sloppy and may lead the installer to either kneel down, hunch over or even lay down, face up underneath the cabinet to locate, hold steady and finally tighten the fasteners.
the Franke ez toRQUe™ Fastening SystemThe FRANKE EZ TORQUE™ fastener is Franke Kindred Canada’s newest innovation for 2014. Product engineers at Franke Kindred Canada work hard responding to industry demands for new sink designs and accessories and now they have found a way to improve things under the counter too! Finally...a solution that focuses on sink installation, making it faster and easier to get the job done right, in less time than the competition!
FRanke innoVationSat FRanke kindRed canda limited
EZ Torque Clamp Introduced 2015
16-B61562 | SPECIFICATIONS | REV.2016
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
1761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
S9106-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9106-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
1861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
S9106-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.
Center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9106-3Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
1961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 5/8" (295 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
S9407-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9407-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 14 1/8" (359 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 12" (305 mm) Bowl depth: 6" (152 mm)
S4206-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S4206-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
S6408-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6408-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
S6808-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6808-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
S6810-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6810-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 19 1/4" (489 mm) Overall left to right: 25 1/4" (641 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 8" (203 mm)
S7308-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S7308-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
S6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6410PCB-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 5" (127 mm)
AS6105P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
AS6105P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 8" (203 mm)
S6108P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6108P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 19 1/4" (489 mm) Overall left to right: 25 1/4" (641 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 10" (254 mm)
S7310P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S7310P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
2961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 19 5/8" (498 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 23 1/2" (597 mm) Bowl depth: 12" (305 mm)
S7312P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S7312P-2center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S7312P-1, S7312P-2Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 19 5/8" (498 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 23 1/2" (597 mm) Bowl depth: 14" (356 mm)
S7314P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 11.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S7314P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/8" (511 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 20" (508 mm) Bowl depth: 14" (356 mm)
S8014P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 10.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S8014P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 13 3/4" (349 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
LBS9106-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9106-1/1, 1 hole, 1 1/2" diameter LBS9106-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9106-1, Custom (non-returnable)
LBS9106-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 13 3/4" (349 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
LBS9106-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.4 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9106-3/1, 1 hole, 1 1/2" diameter LBS9106-3/2, 2 hole, 1 1/2" diameter, 4" centers LBS9106-3, Custom (non-returnable)
LBS9106-3Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
LBS9407-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9407-1/1, 1 hole, 1 1/2" diameter LBS9407-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407-1, Custom (non-returnable)
LBS9407-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
LBS9407-3center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9407-3/1, 1 hole, 1 1/2" diameter LBS9407-3/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407-3, Custom (non-returnable)
LBS9407-3Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 7/16" (392 mm) Overall left to right: 15 1/8" (384 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 6" (152 mm)
LBS1306-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS1306-1/1, 1 hole, 1 1/2" diameter LBS1306-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS1306-1, Custom (non-returnable)
LBS1306-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Overall front to back: 17" (432 mm) Overall left to right: 19 1/8" (486 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 17" (432 mm) Bowl depth: 8" (203 mm)
LBS2708-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS2708-1/1, 1 hole, 1 1/2" diameter LBS2708-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS2708-1, Custom (non-returnable)
LBS2708-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
LBS4607-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4607-1/1, 1 hole, 1 1/2" diameter LBS4607-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS4607-1, Custom (non-returnable)
LBS4607-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
3961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (523 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALBS6405-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6405-1/1, 1 hole, 1 1/2" diameter ALBS6405-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6405-1, Custom (non-returnable)
ALBS6405-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 5" (127 mm)
ALBS6805-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6805-1/1, 1 hole, 1 1/2" diameter ALBS6805-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6805-1, Custom (non-returnable)
ALBS6805-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 7" (178 mm)
LBS6807-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6807-1/1, 1 hole, 1 1/2" diameter LBS6807-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6807-1, Custom (non-returnable)
LBS6807-2center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow
TechnicAl dATA
Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow back Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6807-2/1, 1 hole, 1 1/2" diameter LBS6807-2/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6807-2, Custom (non-returnable)
LBS6807-1, LBS6807-2Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
LBS6808-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6808-1/1, 1 hole, 1 1/2" diameter LBS6808-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6808-1, Custom (non-returnable)
LBS6808-2center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6808-2/1, 1 hole, 1 1/2" diameter LBS6808-2/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6808-2, Custom (non-returnable)
LBS6808-1, LBS6808-2Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBS6810-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6810-1/1, 1 hole, 1 1/2" diameter LBS6810-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6810-1, Custom (non-returnable)
LBS6810-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 8" (203 mm)
LBS7308-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7308-1/1, 1 hole, 1 1/2" diameter LBS7308-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7308-1, Custom (non-returnable)
LBS7308-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08
Overall front to back: 22" (559 mm) Overall left to right: 17 1/4" (438 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 8" (203 mm)
LBS7508-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7508-1/1, 1 hole, 1 1/2" diameter LBS7508-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7508-1 , Custom (non-returnable)
LBS7508-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 5" (127 mm)
ALBS9405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS9405P-1/1, 1 hole, 1 1/2" diameter ALBS9405P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS9405P-1/1, Custom (non-returnable)
ALBS9405P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 6" (152 mm)
ALBS9406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS9406P-1/1, 1 hole, 1 1/2" diameter ALBS9406P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS9406P-1, Custom (non-returnable)
ALBS9406P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 8" (203 mm)
LBS9408P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9408P-1/1, 1 hole, 1 1/2" diameter LBS9408P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9408P-1, Custom (non-returnable)
LBS9408P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
4961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 7/16" (392 mm) Overall left to right: 15 1/8" (384 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 5" (127 mm)
ALBS1305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 3.9 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS1305P-1/1, 1 hole, 1 1/2" diameter ALBS1305P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS1305P-1, Custom (non-returnable)
ALBS1305P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 7/16" (392 mm) Overall left to right: 15 1/8" (384 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 6" (152 mm)
ALBS1306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS1306P-1/1, 1 hole, 1 1/2" diameter ALBS1306P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS1306P-1, Custom (non-returnable)
ALBS1306P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 7/16" (392 mm) Overall left to right: 15 1/8" (384 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 8" (203 mm)
LBS1308P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS1308P-1/1, 1 hole, 1 1/2" diameter LBS1308P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS1308P-1, Custom (non-returnable)
LBS1308P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 17" (432 mm) Overall left to right: 19 1/8" (486 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 17" (432 mm) Bowl depth: 5" (127 mm)
ALBS2705P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment. Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS2705P-1/1, 1 hole, 1 1/2" diameter ALBS2705P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS2705P-1, Custom (non-returnable)
ALBS2705P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 17" (432 mm) Overall left to right: 19 1/8" (486 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 17" (432 mm) Bowl depth: 6" (152 mm)
ALBS2706P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS2706P-1/1, 1 hole, 1 1/2" diameter ALBS2706P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS2706P-1, Custom (non-returnable)
ALBS2706P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 17" (432 mm) Overall left to right: 19 1/8" (486 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 17" (432 mm) Bowl depth: 8" (203 mm)
LBS2708P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS2708P-1/1, 1 hole, 1 1/2" diameter LBS2708P-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBS2708P-1, Custom(non-returnable)
LBS2708P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALBS4405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS4405P-1/1, 1 hole, 1 1/2" diameter ALBS4405P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS4405P-1, Custom (non-returnable)
ALBS4405P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALBS4406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS4406P-1/1, 1 hole, 1 1/2" diameter ALBS4406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS4406P-1, Custom (non-returnable)
ALBS4406P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBS4408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4408P-1/1, 1 hole, 1 1/2" diameter LBS4408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4408P-1, Custom (non-returnable)
LBS4408P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBS4410P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4410P-1/1, 1 hole, 1 1/2" diameter LBS4410P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4410P-1, Custom (non-returnable)
LBS4410P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
5961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALBS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS4605P-1/1, 1 hole, 1 1/2" diameter ALBS4605P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS4605P-1, Custom (non-returnable)
ALBS4605P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALBS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.9 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS4606P-1/1, 1 hole, 1 1/2" diameter ALBS4606P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS4606P-1, Custom (non-returnable)
ALBS4606P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LBS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4608P-1/1, 1 hole, 1 1/2" diameter LBS4608P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4608P-1 Custom (non-returnable)
LBS4608P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
LBS4610P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4610P-1/1, 1 hole, 1 1/2" diameter LBS4610P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS4610P-1, Custom (non-returnable)
LBS4610P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 20" (508 mm) Bowl depth: 5" (127 mm)
ALBS4005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS4005P-1/1, 1 hole, 1 1/2" diameter ALBS4005P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS4005P-1, Custom (non-returnable)
ALBS4005P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 20" (508 mm) Bowl depth: 6" (152 mm)
ALBS4006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS4006P-1/1, 1 hole, 1 1/2" diameter ALBS4006P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS4006P-1, Custom (non-returnable)
ALBS4006P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 20" (508 mm) Bowl depth: 8" (203 mm)
LBS4008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4008P-1/1, 1 hole, 1 1/2" diameter LBS4008P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4008P-1, Custom (non-returnable)
LBS4008P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 20" (508 mm) Bowl depth: 10" (254 mm)
LBS4010P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 7.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4010P-1/1, 1 hole, 1 1/2" diameter LBS4010P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4010P-1, Custom (non-returnable)
LBS4010P-1Single Compartment Topmount Sinks
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
6761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
LBS9407-3center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9407-3/1, 1 hole, 1 1/2" diameter LBS9407-3/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407-3, Custom (non-returnable)
LBS9407-3Single Compartment Topmount Sinks
6861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (523 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 5" (127 mm) Bowl left to right: 14" (356 mm) Bowl depth: 16" (406 mm)
ALBS6405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6405P-1/1, 1 hole, 1 1/2" diameter ALBS6405P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6405P-1, Custom (non-returnable)
ALBS6405P-1Single Compartment Topmount Sinks
6961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALBS6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.4 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS6406P-1/1, 1 hole, 1 1/2" diameter ALBS6406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6406P-1, Custom (non-returnable)
ALBS6406P-1Single Compartment Topmount Sinks
7061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBS6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6408P-1/1, 1 hole, 1 1/2" diameter LBS6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6408P-1, Custom (non-returnable)
LBS6408P-1Single Compartment Topmount Sinks
7161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBS6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6410PCB-1/1, 1 hole, 1 1/2" diameter LBS6410PCB-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6410PCB-1, Custom (non-returnable)
LBS6410PCB-1Single Compartment Topmount Sinks
7261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 5" (127 mm)
ALBS6805P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6805P-1/1, 1 hole, 1 1/2" diameter ALBS6805P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6805P-1, Custom (non-returnable)
ALBS6805P-1Single Compartment Topmount Sinks
7361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 6" (152 mm)
ALBS6806P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS6806P-1/1, 1 hole, 1 1/2" diameter ALBS6806P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6806P-1, Custom (non-returnable)
ALBS6806P-1Single Compartment Topmount Sinks
7461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
LBS6808P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6808P-1/1, 1 hole, 1 1/2" diameter LBS6808P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6808P-1, Custom (non-returnable)
LBS6808P-1Single Compartment Topmount Sinks
7561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBS6810P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6810P-1/1, 1 hole, 1 1/2" diameter LBS6810P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6810P-1, Custom (non-returnable)
LBS6810P-1Single Compartment Topmount Sinks
7661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 5" (127 mm)
ALBS6105P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment. Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.1 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6105P-1/1, 1 hole, 1 1/2" diameter ALBS6105P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6105P-1, Custom (non-returnable)
ALBS6105P-1Single Compartment Topmount Sinks
7761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 6" (152 mm)
ALBS6106P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS6106P-1/1, 1 hole, 1 1/2" diameter ALBS6106P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS6106P-1, Custom (non-returnable)
ALBS6106P-1Single Compartment Topmount Sinks
7861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 8" (203 mm)
LBS6108P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 7.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6108P-1/1, 1 hole, 1 1/2" diameter LBS6108P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6108P-1, Custom (non-returnable)
LBS6108P-1Single Compartment Topmount Sinks
7961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 23 1/8" (587 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 10" (254 mm)
LBS6110P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6110P-1/1, 1 hole, 1 1/2" diameter LBS6110P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6110P-1, Custom (non-returnable)
LBS6110P-1Single Compartment Topmount Sinks
8061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 5" (127 mm)
ALBS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.1 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS7005P-1/1, 1 hole, 1 1/2" diameter ALBS7005P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7005P-1, Custom (non-returnable)
ALBS7005P-1Single Compartment Topmount Sinks
8161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 6" (152 mm)
ALBS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS7006P-1/1, 1 hole, 1 1/2" diameter ALBS7006P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7006P-1, Custom (non-returnable)
ALBS7006P-1Single Compartment Topmount Sinks
8261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 8" (203 mm)
LBS7008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 7.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7008P-1/1, 1 hole, 1 1/2" diameter LBS7008P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS7008P-1, Custom (non-returnable)
LBS7008P-1Single Compartment Topmount Sinks
8361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 10" (254 mm)
LBS7010P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7010P-1/1, 1 hole, 1 1/2" diameter LBS7010P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS7010P-1, Custom (non-returnable)
LBS7010P-1Single Compartment Topmount Sinks
8461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 17 1/4" (438 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 5" (127 mm)
ALBS7505P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS7505P-1/1, 1 hole, 1 1/2" diameter ALBS7505P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7505P-1, Custom (non-returnable)
ALBS7505P-1Single Compartment Topmount Sinks
8561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 17 1/4" (438 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 6" (152 mm)
ALBS7506P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS7506P-1/1, 1 hole, 1 1/2" diameter ALBS7506P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7506P-1, Custom (non-returnable)
ALBS7506P-1Single Compartment Topmount Sinks
8661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 17 1/4" (438 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 8" (203 mm)
LBS7508P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7508P-1/1, 1 hole, 1 1/2" diameter LBS7508P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7508P-1, Custom (non-returnable)
LBS7508P-1Single Compartment Topmount Sinks
8761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 17 1/4" (438 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 10" (254 mm)
LBS7510P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7510P-1/1, 1 hole, 1 1/2" diameter LBS7510P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7510P-1, Custom (non-returnable)
LBS7510P-1Single Compartment Topmount Sinks
8861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 5" (127 mm)
ALBS7305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 7.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS7305P-1/1, 1 hole, 1 1/2" diameter ALBS7305P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7305P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBS7305P-1, Custom (non-returnable)
ALBS7305P-1Single Compartment Topmount Sinks
8961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 6" (152 mm)
ALBS7306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS7306P-1/1, 1 hole, 1 1/2" diameter ALBS7306P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7306P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBS7306P-1, Custom (non-returnable)
ALBS7306P-1Single Compartment Topmount Sinks
9061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 8" (203 mm)
LBS7308P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7308P-1/1, 1 hole, 1 1/2" diameter LBS7308P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7308P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7308P-1, Custom (non-returnable)
LBS7308P-1Single Compartment Topmount Sinks
9161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 10" (254 mm)
LBS7310P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7310P-1/1, 1 hole, 1 1/2" diameter LBS7310P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7310P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7310P-1 Custom (non-returnable)
LBS7310P-1Single Compartment Topmount Sinks
9261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 23 1/2" (597 mm) Bowl depth: 12" (305 mm)
LBS7312P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 10 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7312P-1/1, 1 hole, 1 1/2" diameter LBS7312P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7312P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7312P-1, Custom (non-returnable)
LBS7312P-1Single Compartment Topmount Sinks
9361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 9/16" (573 mm) Overall left to right: 25 5/8" (651 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 23 1/2" (597 mm) Bowl depth: 14" (356 mm)
LBS7314P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 11.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7314P-1/1, 1 hole, 1 1/2" diameter LBS7314P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7314P-1, Custom (non-returnable)
LBS7314P-1Single Compartment Topmount Sinks
9461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 30 1/8" (765 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 28" (711 mm) Bowl depth: 5" (127 mm)
ALBS7805P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS7805P-1/1, 1 hole, 1 1/2" diameter ALBS7805P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7805P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBS7805P-1, Custom (non-returnable)
ALBS7805P-1Single Compartment Topmount Sinks
9561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 30 1/8" (765 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 28" (711 mm) Bowl depth: 6" (152 mm)
ALBS7806P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
ALBS7806P-1/1, 1 hole, 1 1/2" diameter ALBS7806P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7806P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBS7806P-1, Custom (non-returnable)
ALBS7806P-1Single Compartment Topmount Sinks
9661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 30 1/8" (765 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 28" (711 mm) Bowl depth: 8" (203 mm)
LBS7808P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 9.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS7808P-1/1, 1 hole, 1 1/2" diameter, LBS7808P-1/3, 3 hole, 8" centerset, 1 1/2" diameter, LBS7808P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7808P-1/4, Custom(non-returnable)
LBS7808P-1Single Compartment Topmount Sinks
9761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 23 1/8" (587 mm) Overall left to right: 22 1/8" (562 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 20" (508 mm) Bowl depth: 14" (356 mm)
LBS8014P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 11.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS8014P-1/1, 1 hole, 1 1/2" diameter LBS8014P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS8014P-1, Custom (non-returnable)
LBS8014P-1Single Compartment Topmount Sinks
9861562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 13 3/4" (349 mm) Overall left to right: 21 11/16" (551 mm)
Bowl front to back: 11 5/8" (295 mm) Bowl left to right: 9 1/4" (235 mm) Bowl depth: 6" (152 mm)
D1906-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 4.7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D1906-1Double Compartment Topmount Sinks
9961562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 7/16" (468 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
D6408-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 7.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D6408-1Double Compartment Topmount Sinks
10061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/8" (511 mm) Overall left to right: 35 1/4" (895 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
D8610-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 9.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D8610-1Double Compartment Topmount Sinks
10161562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
D6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 9.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D6410PCB-1Double Compartment Topmount Sinks
10261562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed Easy Claw fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/4" (464 mm) Overall left to right: 26 5/8" (677 mm) Overall height: 6" (153 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (153 mm)
ALBDC182605P-1This sink is specifically designed for wheelchair accessibility. Unique shape allows for a deeper 6" (152mm) bowl on the left. Smaller bowl on the right is 5" (127mm) deep. The sink can be installed as a drop in or as an undermount. (if undermounting, verify wheelchair clearance as the sink will be mounted below the countertop). We recommend a swivel spout with a remote single lever mixing handle.
Technical daTa
Type of basin Double Compartment Net weight 9 kgType of mounting various types of mounting Waste size DN 90 Waste kit included yes Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of bowls 2 Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBDC182605P-1/2 - 2 hole ∅1.5"(38mm) 8"(204mm) Centerset ALBDC182605P-1, Custom(non-returnable)
ALBDC182605P-1Double Compartment Topmount Sinks
10361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
Usa: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 39" (991 mm)
Bowl front to back: 20" (508 mm) Bowl left to right: 18" (457 mm) Bowl depth: 14" (356 mm)
D0814P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 21.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D0814P-1Double Compartment Topmount Sinks
10461562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALBD6405-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Rear corner waste locations, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 7.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position corner Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBD6405-1/1, 1 hole, 1 1/2" diameter ALBD6405-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBD6405-1, Custom (non-returnable) ALBD6405-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
ALBD6405-1Double Compartment Topmount Sinks
10561562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 7" (178 mm)
LBD6407-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD6407-1/1, 1 hole, 1 1/2" diameter LBD6407-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6407-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD6407-1, Custom (non-returnable)
LBD6407-1Double Compartment Topmount Sinks
10661562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBD6408-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 8.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD6408-1/1, 1 hole, 1 1/2" diameter LBD6408-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408-1/4, 4 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408-1, Custom (non-returnable)
LBD6408-1Double Compartment Topmount Sinks
10761562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 39 3/16" (995 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
LBD6808-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 10.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD6808-1/1, 1 hole, 1 1/2" diameter LBD6808-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6808-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6808-1, Custom (non-returnable)
LBD6808-1Double Compartment Topmount Sinks
10861562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 33 1/4" (845 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 8" (203 mm)
LBD7508-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 10.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD7508-1/1, 1 hole, 1 1/2" diameter LBD7508-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD7508-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD7508-1, Custom (non-returnable)
LBD7508-1Double Compartment Topmount Sinks
10961562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 13/16" (402 mm) Overall left to right: 29 1/4" (743 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 5" (127 mm)
ALBD1305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 7.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBD1305P-1/1, 1 hole, 1 1/2" diameter Centered over partition ALBD1305P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD1305P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD1305P-1, Custom (non-returnable)
ALBD1305P-1Double Compartment Topmount Sinks
11061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 13/16" (402 mm) Overall left to right: 29 1/4" (743 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 6" (152 mm)
ALBD1306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 7.9 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
ALBD1306P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD1306P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD1306P-1, Custom (non-returnable)
ALBD1306P-1Double Compartment Topmount Sinks
11161562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10),18-10 stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 15 13/16" (402 mm) Overall left to right: 29 1/4" (743 mm)
Bowl front to back: 11" (279 mm) Bowl left to right: 13" (330 mm) Bowl depth: 8" (203 mm)
LBD1308P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 9.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD1308P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBD1308P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD1308P-1, Custom (non-returnable)
LBD1308P-1Double Compartment Topmount Sinks
11261562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALBD4405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 9.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBD4405P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD4405P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD4405P-1, Custom (non-returnable)
ALBD4405P-1Double Compartment Topmount Sinks
11361562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALBD4406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 9.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
ALBD4406P-1/1, 1 hole, 1 1/2" diameter, centered over partition ALBD4406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD4406P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD4406P-1, Custom (non-returnable)
ALBD4406P-1Double Compartment Topmount Sinks
11461562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10),18-10 stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBD4408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 11.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD4408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBD4408P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD4408P-1, Custom (non-returnable)
LBD4408P-1Double Compartment Topmount Sinks
11561562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBD4410P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 12.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD4410P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBD4410P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD4410P-1, Custom (non-returnable)
LBD4410P-1Double Compartment Topmount Sinks
11661562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALBD6405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste locations, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 10.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBD6405P-1/1, 1 hole, 1 1/2" diameter ALBD6405P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD6405P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD6405P-1, Custom (non-returnable)
ALBD6405P-1Double Compartment Topmount Sinks
11761562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (520 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALBD6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 10.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
ALBD6406P-1/1, 1 hole, 1 1/2" diameter ALBD6406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD6406P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD6406P-1, Custom (non-returnable)
ALBD6406P-1Double Compartment Topmount Sinks
11861562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10),18-10 stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (520 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBD6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 9.7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD6408P-1/1, 1 hole, 1 1/2" diameter LBD6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408P-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD6408P-1, Custom (non-returnable)
LBD6408P-1Double Compartment Topmount Sinks
11961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
Usa: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBD6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 14 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD6410PCB-1/1, hole, 1 1/2" diameter, centered over partition LBD6410PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter, centered over partition LBD6410PCB-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6410PCB-1, Custom (non-returnable)
LBD6410PCB-1Double Compartment Topmount Sinks
12061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 33 1/4" (845 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 5" (127 mm)
ALBD7505P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 11.1 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTions
ALBD7505P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD7505P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD7505P-1, Custom (non-returnable)
ALBD7505P-1Double Compartment Topmount Sinks
12161562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 33 1/4" (845 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 6" (152 mm)
ALBD7506P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 11.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
ALBD7506P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD7506P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD7506P-1, Custom (non-returnable)
ALBD7506P-1Double Compartment Topmount Sinks
12261562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10),18-10 stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 33 1/4" (845 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 8" (203 mm)
LBD7508P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway
Technical daTa
Type of basin Double Compartment Gross weight 13.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD7508P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBD7508P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD7508P-1, Custom (non-returnable)
LBD7508P-1Double Compartment Topmount Sinks
12361562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22" (559 mm) Overall left to right: 33 1/4" (845 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 15" (381 mm) Bowl depth: 10" (254 mm)
LBD7510P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 14.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD7510P-1/1, 1 hole, 1 1/2" diameter LBD7510P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD7510P-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD7510P-1, Custom (non-returnable)
LBD7510P-1Double Compartment Topmount Sinks
12461562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 1/16" (560 mm) Overall left to right: 50 1/4" (1276 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 23 1/2" (597 mm) Bowl depth: 12" (305 mm)
LBD7412P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 16.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD7412P-1/1, 1 hole, 1 1/2" diameter LBD7412P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD7412P-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD7412P-1, Custom (non-returnable)
LBD7412P-1Double Compartment Topmount Sinks
12561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
Usa: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 25" (635 mm) Overall left to right: 39" (991 mm)
Bowl front to back: 20" (508 mm) Bowl left to right: 18" (457 mm) Bowl depth: 14" (356 mm)
LBD0814P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Double Compartment Gross weight 23.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBD0814P-1/1, 1 hole, 1 1/2" diameter LBD0814P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD0814P-1, Custom (non-returnable) LBD0814P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
LBD0814P-1Double Compartment Topmount Sinks
12661562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 46 3/8" (1178 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
T6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Triple Compartment Gross weight 28 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
T6410PCB-1Triple Compartment Topmount Sinks
12761562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/8" (511 mm) Overall left to right: 52 3/8" (1330 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
T8610-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Technical daTa
Type of basin Triple Compartment Gross weight 32 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
T8610-1Triple Compartment Topmount Sinks
12861562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 46 3/8" (1178 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 7" (178 mm)
LBT6407CB-1
Technical daTa
Type of basin Triple Compartment Gross weight 12.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBT6407CB-1/1, 1 hole, 1 1/2" diameter LBT6407CB-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBT6407CB-1, Custom (non-returnable)
LBT6407CB-1Triple Compartment Topmount Sinks
12961562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 46 3/8" (1178 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBT6410PCB-1
Technical daTa
Type of basin Triple Compartment Gross weight 16.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBT6410PCB-1/1, 1 hole, 1 1/2" diameter LBT6410PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBT6410PCB-1, Custom (non-returnable)
LBT6410PCB-1Triple Compartment Topmount Sinks
13161562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment self rimming drop-in sink with faucet ledge. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 22 9/16" (573 mm) Overall left to right: 52 3/8" (1330 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
LBT8610P-1
Technical daTa
Type of basin Triple Compartment Gross weight 15.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTions
LBT8610P-1/1, 1 hole, 1 1/2" diameter LBT8610P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBT8610P-1, Custom (non-returnable)
LBT8610P-1Triple Compartment Topmount Sinks
13261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALBLS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALBLS4605P-1/2, 1 hole, bubbler on left ledge ALBLS4605P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ALBLS4605P-1Classroom Sinks
13361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALBLS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBLS4606P-1/2, 1 hole, bubbler on left ledge ALBLS4606P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ALBLS4606P-1Classroom Sinks
13461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LBLS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBLS4608P-1/2, 1 hole, bubbler on left ledge LBLS4608P-1/4, 3 hole, 8" centerset, bubbler on left ledge
LBLS4608P-1Classroom Sinks
13561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (523 mm) Overall left to right: 18 9/16" (471 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALBLS6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBLS6406P-1/2, 1 hole, bubbler on left ledge ALBLS6406P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALBLS6406P-1Classroom Sinks
13661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (523 mm) Overall left to right: 18 9/16" (471 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBLS6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBLS6408P-1/2, 1 hole, bubbler on left ledge LBLS6408P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
LBLS6408P-1Classroom Sinks
13761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 5" (127 mm)
ALBLS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALBLS7005P-1/2, 1 hole, bubbler on left ledge ALBLS7005P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALBLS7005P-1Classroom Sinks
13861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 6" (152 mm)
ALBLS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBLS7006P-1/2, 1 hole, bubbler on left ledge ALBLS7006P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALBLS7006P-1Classroom Sinks
13961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 8" (203 mm)
LBLS7008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 7.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBLS7008P-1/2, 1 hole, bubbler on left ledge LBLS7008P-1/4, 3 hole, 8" centerset, bubbler on left ledge
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on left ledge1 hole
bubbler hole on left ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
LBLS7008P-1Classroom Sinks
14061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALBRS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 4.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBRS4605P-1/2, 1 hole, bubbler on right ledge ALBRS4605P-1/4, 3 hole, 8" centerset, bubbler on right ledge
ALBRS4605P-1Classroom Sinks
14161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALBRS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBRS4606P-1/2, 1 hole, bubbler on right ledge ALBRS4606P-1/4, 3 hole, 8" centerset, bubbler on right ledge
ALBRS4606P-1Classroom Sinks
14261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LBRS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBRS4608P-1/2, 1 hole, bubbler on right ledge LBRS4608P-1/4, 3 hole, 8" centerset, bubbler on right ledge
LBRS4608P-1Classroom Sinks
14361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 5" (127 mm)
ALBRS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALBRS7005P-1/2, 1 hole, bubbler on right ledge ALBRS7005P-1/4, 3 hole, 8" centerset, bubbler on right ledge ALBRS7005P-1, Custom (non-returnable)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on right ledge1 hole
bubbler hole on right ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ALBRS7005P-1Classroom Sinks
14461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 6" (152 mm)
ALBRS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBRS7006P-1/2, 1 hole, bubbler on right ledge ALBRS7006P-1/4, 3 hole, 8" centerset, bubbler on right ledge
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on right ledge1 hole
bubbler hole on right ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ALBRS7006P-1Classroom Sinks
14561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 24 13/16" (630 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 8" (203 mm)
LBRS7008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 7.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBRS7008P-1/2, 1 hole, bubbler on right ledge ALBRS7008P-1/4, 3 hole, 8" centerset, bubbler on right ledge
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2 /43 hole, 8" centerset
bubbler hole on right ledge1 hole
bubbler hole on right ledge
ø1 1/2"(38mm)
8" (204mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
LBRS7008P-1Classroom Sinks
14661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with triple ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 27 1/2" (699 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 5" (127 mm)
ALBLRS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALBLRS7005P-1/3L, 2 single holes, bubbler hole left ledge ALBLRS7005P-1/3R, 2 single holes, bubbler hole right ledge ALBLRS7005P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge ALBLRS7005P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge
ALBLRS7005P-1Classroom Sinks
14761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with triple ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 27 1/2" (699 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 6" (152 mm)
ALBLRS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 7.1 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALBLRS7006P-1/3L, 2 single holes, bubbler hole left ledge ALBLRS7006P-1/3R, 2 single holes, bubbler hole right ledge ALBLRS7006P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge ALBLRS7006P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge
ALBLRS7006P-1Classroom Sinks
14861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with triple ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 13/16" (554 mm) Overall left to right: 27 1/2" (699 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 20" (508 mm) Bowl depth: 8" (203 mm)
LBLRS7008P-1Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBLRS7008P-1/3L, 2 single holes, bubbler hole left ledge LBLRS7008P-1/3R, 2 single holes, bubbler hole right ledge LBLRS7008P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge LBLRS7008P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge
LBLRS7008P-1Classroom Sinks
14961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 16 1/8" (410 mm) Overall left to right: 23 1/2" (597 mm)Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALHS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 4.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS4605P-1/2L, 1 hole, bubbler hole left ledge ALHS4605P-1/2R, 1 hole, bubbler hole left ledge ALHS4605P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4605P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4605P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS4605P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALHS4605P-1Classroom Sinks
15061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 16 1/8" (410 mm) Overall left to right: 23 1/2" (597 mm)Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALHS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 4.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS4606P-1/2L, 1 hole, bubbler hole left ledge ALHS4606P-1/2R, 1 hole, bubbler hole left ledge ALHS4606P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4606P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4606P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS4606P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALHS4606P-1Classroom Sinks
15161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 23 1/2" (597 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LHS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 5.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS4608P-1/2L, 1 hole, bubbler hole left ledge ALHS4608P-1/2R, 1 hole, bubbler hole left ledge ALHS4608P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4608P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4608P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS4608P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
LHS4608P-1Classroom Sinks
15261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 21 1/2" (546 mm)Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
ALHS6405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 4.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALHS6405P-1/2L, 1 hole, bubbler hole left ledge ALHS6405P-1/2R, 1 hole, bubbler hole left ledge ALHS6405P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS6405P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS6405P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS6405P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
ALHS6405P-1Classroom Sinks
15361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 18 1/8" (460 mm) Overall left to right: 21 1/2" (546 mm)Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
ALHS6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 4.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS6406P-1/2L, 1 hole, bubbler hole left ledge ALHS6406P-1/2R, 1 hole, bubbler hole left ledge ALHS6406P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS6406P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS6406P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS6406P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
ALHS6406P-1Classroom Sinks
15461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 21 1/2" (546 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LHS6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 5.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LHS6408P-1/2L, 1 hole, bubbler hole left ledge LHS6408P-1/2R, 1 hole, bubbler hole left ledge LHS6408P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge LHS6408P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge LHS6408P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge LHS6408P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
LHS6408P-1Classroom Sinks
15561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 19 1/8" (486 mm) Overall left to right: 30 1/2" (775 mm)Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 5" (127 mm)
ALHS7305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALHS7305P-1/2L, 1 hole, bubbler hole left ledge ALHS7305P-1/2R, 1 hole, bubbler hole left ledge ALHS7305P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7305P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7305P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS7305P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
ALHS7305P-1Classroom Sinks
15661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 19 1/8" (486 mm) Overall left to right: 30 1/2" (775 mm)Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 6" (152 mm)
ALHS7306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 7.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS7306P-1/2L, 1 hole, bubbler hole left ledge ALHS7306P-1/2R, 1 hole, bubbler hole left ledge ALHS7306P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7306P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7306P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS7306P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
ALHS7306P-1Classroom Sinks
15761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 19 1/8" (486 mm) Overall left to right: 30 1/2" (775 mm)
Bowl front to back: 17" (432 mm) Bowl left to right: 23" (584 mm) Bowl depth: 8" (203 mm)
LHS7308P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS7308P-1/2L, 1 hole, bubbler hole left ledge ALHS7308P-1/2R, 1 hole, bubbler hole left ledge ALHS7308P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7308P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS7308P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS7308P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
LHS7308P-1Classroom Sinks
15861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 20 1/8" (511 mm) Overall left to right: 23 1/2" (597 mm)Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALHS8605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 5.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS8605P-1/2L, 1 hole, bubbler hole left ledge ALHS8605P-1/2R, 1 hole, bubbler hole left ledge ALHS8605P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS8605P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS8605P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS8605P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALHS8605P-1Classroom Sinks
15961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/8" (511 mm) Overall left to right: 23 1/2" (597 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALHS8606P-1Wheelchair accessible (Canada only), center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALHS8606P-1/2L, 1 hole, bubbler hole left ledge ALHS8606P-1/2R, 1 hole, bubbler hole left ledge ALHS8606P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS8606P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS8606P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS8606P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
ALHS8606P-1Classroom Sinks
16061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/8" (511 mm) Overall left to right: 23 1/2" (597 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LHS8608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LHS8608P-1/2L, 1 hole, bubbler hole left ledge LHS8608P-1/2R, 1 hole, bubbler hole left ledge LHS8608P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge LHS8608P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge LHS8608P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge LHS8608P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge
Diagonal Punching Diagonal Punching
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
ø1 1/2" (38mm)
/2L /4L1 hole
bubbler hole on left ledge3 hole, 8" centerset
1 bubbler hole on left ledge
/2R /4R1 hole
bubbler hole on right ledge3 hole, 8" centerset
bubbler hole on right ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
/2DR /2DL
1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge
ø1 1/8" (29mm)
ø1 1/8" (29mm)
8"(204mm)
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
LHS8608P-1Classroom Sinks
16161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)
ALRS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 9.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
ALRS4605P-1/1, 1 hole ALRS4605P-1/2, 2 hole, 4" centerset ALRS4605P-1/3, 3 hole, 8" centerset
ALRS4605P-1Classroom Sinks
16261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 6" (152 mm)
ALRS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Classroom Gross weight 9.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
ALRS4606P-1/1, 1 hole ALRS4606P-1/2, 2 hole, 4" centerset ALRS4606P-1/3, 3 hole, 8" centerset
ALRS4606P-1Classroom Sinks
16361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 20 13/16" (529 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
LRS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 5.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LRS4608P-1/1, 1 hole LRS4608P-1/2, 2 hole, 4" centerset LRS4608P-1/3, 3 hole, 8" centerset
LRS4608P-1Classroom Sinks
16461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpieceTechnicAl dATA
Type of basin Single Compartment Gross weight 16.4 kg (ART36-1) 17.7 kg (ART48-1) 19.1 kg (ART60-1)Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Art Room - 18 gaugeClassroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
overAll dimenSionS Sink comPArTmenT dimenSionS
model A (fronT-BAck)
B (lefT-righT)
c (fronT-BAck)
d (lefT-righT)
e (dePTh)
WASTe locATion
ART36-1 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) C
ART48-1 19 1/8" (486 mm) 50 1/8" (1273 mm) 17" (432 mm) 48" (1219 mm) 8" (203 mm) C
ART60-1 19 1/8" (486 mm) 62 1/8" (1578 mm) 17" (432 mm) 60" (1524 mm) 8" (203 mm) C
16561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2” (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 16.4 kg (ART36-3C)Gross weight 17.7 kg (ART48-3C)Gross weight 19.1 kg (ART60-3C)Type of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Art room - 18 gaugeClassroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
overAll dimenSionS Sink comPArTmenT dimenSionS
model A (fronT-BAck)
B (lefT-righT)
c (fronT-BAck)
d (lefT-righT)
e (dePTh)
WASTe locATion
ART36-3C 19 1/8" (486 mm) 38 1/8" (968 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) C
ART48-3C 19 1/8" (486 mm) 50 1/8" (1273 mm) 17" (432 mm) 48" (1219 mm) 8" (203 mm) C
ART60-3C 19 1/8" (486 mm) 62 1/8" (1578 mm) 17" (432 mm) 60" (1524 mm) 8" (203 mm) C
165-A61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with a faucet hole 1 3/8" (35 mm) for each wash place. Waste and overflow valve DN 40 x 120 mm (4 3/4") implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 43 5/16 x 9 7/16 x 17 11/16" Left to right x height x front to back 1100 x 240 x 450 mm (WxHxD) 2 wash places, 7 7/8" (200 mm) bowl depth
SANW200TechnicAl dATA
Material mineral materialGross weight 70.25 kg/154.87 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 2Number of wash places 2Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SANW200Classroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
165-B61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 2 faucet holes, 1 3/8" (35 mm) for each wash place.
Waste and overflow valve DN 40 x 120 mm implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 82 11/16 x 9 7/16 x 18 1/2" Left to right x height x front to back 2100 x 240 x 470 mm (WxHxD) 4 wash places, 7 7/8" (200 mm) bowl depth
SANW205TechnicAl dATA
Material mineral materialGross weight 118 kg/260.14 lbs.Net weight 104 kg/229.28Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SANW205Classroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
165-C61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WASHINO Children's Wash-and-Play Trough made of MIRANIT resin- bonded mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. With 4 wash places (2 wash places with a height difference of 100 mm), wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimize risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 4 faucet holes, 1 3/8" (35 mm). Integrated divider with overflow function made of MIRANIT, blue colour (RAL 5002).
Waste and overflow valve DN 40 x 120 mm implemented as a standpipe for 2 of the 4 washing stations. Integral back panel for fixing. Mounting instructions included. Overall dimensions: 82 11/16 x 13 3/8 x 18 1/2" Left to right x height x front to back 2100 x 340 x 470 mm (WxHxD) Version with basin left above/right below. Bowl depth 7 7/8" (200 mm)
SANW211TechnicAl dATA
Material mineral materialGross weight 145kg/319.67 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SANW211Classroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
165-D61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. With 4 wash places (2 wash places with a height difference of 100 mm), wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 4 faucet holes, 1 3/8" (35 mm). Integrated divider with overflow function made of MIRANIT, blue colour (RAL 5002).Waste and overflow valve DN 40 x 120 mm implemented as a standpipe for 2 of the 4 wash places. Integral back panel for fixing. Mounting material included. Overall dimensions: 82 11/16" x 13 3/8 x 18 1/2" Left to right x height x front to back 2100 x 340 x 470 mm (WxHxD) Version with basin right above/left below. Bowl depth 7 7/8" (200 mm). (No photo currently available. Actual model would be the reverse of the photo shown.)
SANW212TechnicAl dATA
Material mineral materialGross weight 95kg/209.44 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SANW212Classroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Photo not available. Model shown is SANW211.
165-E61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 3 faucet holes, 1 3/8" (35 mm). Waste and overflow valve DN 40 x 120 mm implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 63 x 9 7/16 x 17 11/16" Left to right x height x front to back 1600 x 240 x 450 mm (WxHxD) 3 wash places. Bowl depth 7 7/8" (200 mm).
SANW215TechnicAl dATA
Material mineral materialGross weight 95kg/209.44 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 3Number of wash places 3Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals cUPC approval
SANW215Classroom Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
165-F61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Multiple bowls with ledges - 18 gaugeClassroom Sinks
Topmount Sink
Double compartment self rimming combination drop-in sink with faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
WASTe Size (Indicated in model number, eg. LBLDC1737P-1)-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
For a 3 1/2" (89 mm) vandal-resistant grid strainer, order separately using part number 1300G.
WASTe locATionC = center CB= center back
fAUceT hole oPTionS (STAndArd)When ordering a model number, indicate which faucet hole option is required by adding the # of holes required to the end of the model number; (eg. LBDC1737P-1/2)See standard options by model.
configUrATionSLBLDC1737P-1 Small bowl left, LBRDC1737P-1 Small bowl right LBLDC1943P-1 Small bowl left, LBRDC1943P-1 Small bowl right
cUSTom fAUceT holeSCustom faucet hole drillings are available on all models. Order model as indicated in chart below, specifying all necessary hole drilling information. Sinks with custom drillings are non-returnable.
ø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3 3 hole 8" centerset
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
CLASSROOM - LBRDC SERIES
ø1 1/2"(38mm)
4" (102mm)
/11 hole
ø1 1/2" (38mm)
/2 2 hole, 4" centerset
ø1 1/2"(38mm)
8" (204mm)
/3 3 hole 8" centerset
ø1 1/8" (29mm)
ø1 1/8" (29mm)
ø1 1/8" (29mm)
5 [127 mm] 6 [152 mm]
17 [432 mm]
12¾ [324 mm]
1313⁄16 [351 mm]
89⁄16 [217 mm]
8½ [216 mm]
19 [483 mm]
14½ [368 mm]
9½ [241 mm] 20 [508 mm]
43 [1092 mm]
STAndArd hole drilling configUrATion - cenTer BAck WASTe PoSiTion STAndArd hole drilling configUrATion - cenTer WASTe PoSiTion
LBLDC1943P-1 Shown
overAll dimenSionS Sink comPArTmenT dimenSionS
model A (fronT-BAck)
B (lefT-righT)
c (fronT-BAck)
d (lefT-righT)
e (dePTh)
WASTe locATion
fAUceT hole oPTionS
LBLDC1737P-1 17" (432 mm) 37" (940 mm) 12" (305 mm) 17" (432 mm) 8" (203 mm) C 1, 2, 3
LBRDC1737P-1 17" (432 mm) 37" (940 mm) 12" (305 mm) 17" (432 mm) 8" (203 mm) C 1, 2, 3
LBLDC1943P-1 19" (483 mm) 43" (1092 mm) 17" (432 mm) 20" (508 mm) 6" (152 mm) CB 1, 2, 3
LBRDC1943P-1 19" (483 mm) 43" (1092 mm) 17" (432 mm) 20" (508 mm) 6" (152 mm) CB 1, 2, 3
VIEW / DRAWING TyPE / MODEL
BUBBLER HOLE DETAIL
ø1 1/8" (29mm)
ø1 1/2" (38mm)
16661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Left rear waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 5" (127 mm)
UCS6805P-1
Technical daTa
Type of basin Single Compartment Gross weight 10 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
UCS6805P-1Undermount Sinks
16761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 19 3/4" (502 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
UCS6808P-1
Technical daTa
Type of basin Single Compartment Gross weight 11 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS6808P-1Undermount Sinks
16861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 30 7/8" (784 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
UCD6405P-1
Technical daTa
Type of basin Double Compartment Gross weight 16 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
UCD6405P-1Undermount Sinks
16961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 30 7/8" (784 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
UCD6408P-1
Technical daTa
Type of basin Double Compartment Gross weight 16 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCD6408P-1Undermount Sinks
Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 30 7/8" (784 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
UCD6408P-1
Technical daTa
Type of basin Double Compartment Gross weight 16 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCD6408P-1Undermount Sinks
61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
169-A
Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 22 3/4" (578 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 21" (533 mm) Bowl depth: 5" (127 mm)
UCS6105P-1
Technical daTa
Type of basin Single Compartment Gross weight 4.69 kg / 10.3 lbs.Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS6105P-1Undermount Sinks
19361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 20 5/8" (524 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBSDBR6408P-1Drain board is located to the right of sink bowl and is sloped for drainage, center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 19 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBSDBR6408P-1/1, 1 hole, 1 1/2" diameter LBSDBR6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6408P-1, Custom (non-returnable)
LBSDBR6408P-1Drainboard Sinks
19461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 20 5/8" (524 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBSDBL6408P-1Drain board is located to the left of sink bowl and is sloped for drainage, center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 19 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBSDBL6408P-1/1, 1 hole, 1 1/2" diameter LBSDBL6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6408P-1, Custom (non-returnable)
LBSDBL6408P-1Drainboard Sinks
19561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 40" (1016 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBSDBR6810P-1Drain board is located to the right of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 22 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBSDBR6810P-1/1, 1 hole, 1 1/2" diameter LBSDBR6810P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6810P-1, Custom (non-returnable)
LBSDBR6810P-1Drainboard Sinks
19661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 40" (1016 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBSDBL6810P-1Drain board is located to the left of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Single Compartment Gross weight 22 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBSDBL6810P-1/1, 1 hole, 1 1/2" diameter LBSDBL6810P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6810P-1, Custom (non-returnable)
LBSDBL6810P-1Drainboard Sinks
19761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge and drain board. Drain board is located to the right of sink bowl and is sloped for drainage. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 51" (1295 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBDDBR6408P-1Drain board is located to the right of sink bowls and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Double Compartment Gross weight 10.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBDDBR6408P-1/1, 1 hole, 1 1/2" diameter LBDDBR6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBDDBR6408P-1, Custom (non-returnable)
LBDDBR6408P-1Drainboard Sinks
19861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge and drain board. Drain board is located to the right of sink bowl and is sloped for drainage. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 51" (1295 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBDDBL6408P-1Drain board is located to the left of sink bowls and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
technIcAl dAtA
Type of basin Double Compartment Gross weight 10.9 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
LBDDBL6408P-1/1, 1 hole, 1 1/2" diameter LBDDBL6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBDDBL6408P-1, Custom (non-returnable)
LBDDBL6408P-1Drainboard Sinks
19961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartment sloped to drain with radius coved corners on front and back only. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08
WASte Size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece-5 = 1 1/2" (38mm) duplex waste assembly, rubber stopper, and 1 1/2" (DN38) brass tailpiece with standpipe and guard
WASte locAtionC = centerRR = right rear
FAUcet hole optionS (StAndArd)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to rim:35" (890mm)
Drawing shown with a "-1" waste
Classic Series - 16 gaugeScullery Sinks
project inFormAtion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment
overAll dimenSionS Sink compArtment dimenSionS
model A (Front-BAck)
B (leFt-right)
c (Front-BAck)
d (leFt-right)
e (depth)
F BAckSplASh
WASte locAtion
FAUcet holeS
SL2424-1 27 3/16" (691 mm) 27 3/8" (695 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
SL2424-5 27 3/16" (691 mm) 27 3/8" (695 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2
SL2448-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2
SL2448-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR 2
20061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless steel tubular legs with adjustable feet. Includes waste fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08
WASte Size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece-5 = 1 1/2" (38mm) duplex waste assembly, rubber stopper, and 1 1/2" (DN38) brass tailpiece with standpipe and guard
WASte locAtionC = centerRR = right rearLR = left rear
FAUcet hole optionS (StAndArd)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to rim:35" (890mm)
Drawing shown with a "-1" waste
Classic Series - 16 gaugeScullery Sinks
Double Compartment
overAll dimenSionS Sink compArtment dimenSionS
model A (Front-BAck)
c (Front-BAck)
d (leFt-right)
e (depth)
F BAckSplASh
WASte locAtion
FAUcet holeS
DL2448-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2
DL2448-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR, LR 2
project inFormAtion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
20161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless steel tubular legs with adjustable feet. Includes waste fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08
WASte Size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece-5 = 1 1/2" (38mm) duplex waste assembly, rubber stopper, and 1 1/2" (DN38) brass tailpiece with standpipe and guard
WASte locAtionC = centerRR = right rearLR = left rear
FAUcet hole optionS (StAndArd)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to rim:35" (890mm)
Drawing shown with a "-1" waste
Classic Series - 16 gaugeScullery Sinks
project inFormAtion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment
overAll dimenSionS Sink compArtment dimenSionS
model A (Front-BAck)
B (leFt-right)
c (Front-BAck)
d (leFt-right)
e (depth)
F BAckSplASh
WASte locAtion
FAUcet holeS
TL2454-1 27 3/16" (691 mm) 57 3/8" (1457 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
TL2454-5 27 3/16" (691 mm) 57 3/8" (1457 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) RR, RR, LR 2
TL2472-1 27 3/16" (691 mm) 75 3/8" (1915 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
TL2472-5 27 3/16" (691 mm) 75 3/8" (1915 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR, RR, LR 2
20261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
project inFormAtion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Removable drain board for Classic Series scullery sinks. Made from 16 gauge (1.5mm) type 304 stainless steel. Polished to a satin finish. The legs have adjustable feet and are interchangeable such that the product can be installed on either the left or right of the scullery.
Overall front to back: 23" (584 mm) Overall left to right: 24" (610 mm) Overall height: 36" (914 mm)
CL-DBMounting left or right
technicAl dAtA
Gross weight 11 kgDrainer or storage drainer Back splash height 1" (25 mm)Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
CL-DBScullery Sinks
www.franke-commercial.com REV-20361562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-20461562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
SSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2
Drawing shown with Right Drainboard option (R-1)
www.franke-commercial.com REV-20561562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-20661562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Sink compartments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SDL2436-1 28 1/2" (724 mm) 40 1/4" (1022 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SDL2448-1 28 1/2" (724 mm) 52 1/4" (1327 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-20761562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Drainboard and sink compart-ments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with Left Drainboard option (L-1)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SDL2436L-1 28 1/2" (724 mm) 62 1/8" (1578 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SDL2436R-1 28 1/2" (724 mm) 62 1/8" (1578 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SDL2448L-1 28 1/2" (724 mm) 74 1/8" (1883 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
SDL2448R-1 28 1/2" (724 mm) 74 1/8" (1883 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-20861562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Drainboard and sink compart-ments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
SDL2436LR-1 28 1/2" (724 mm) 84" (2133 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
SDL2448LR-1 28 1/2" (724 mm) 96" (2438 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-20961562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are sloped to drain and are square corner construction. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
STL2454-1 28 1/2" (724 mm) 58 1/4" (1480 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
STL2472-1 28 1/2" (724 mm) 76 1/4" (1937 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21061562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are sloped to drain and are square corner construction. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with Left Drainboard option (L-1)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
STL2454L-1 28 1/2" (724 mm) 80 1/8" (2035 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
STL2454R-1 28 1/2" (724 mm) 80 1/8" (2035 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
STL2472L-1 28 1/2" (724 mm) 98 1/8" (2492 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
STL2472R-1 28 1/2" (724 mm) 98 1/8" (2492 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21161562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are sloped to drain and are square corner construction. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
S series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
STL2454LR-1 28 1/2" (724 mm) 102" (2590 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
STL2472LR-1 28 1/2" (724 mm) 120" (3048 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21261562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21361562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown Right Drainboard option (R-1)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
RSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21461562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21561562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowls sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RDL2436-1 28 1/2" (724 mm) 42 1/4" (1073 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RDL2448-1 28 1/2" (724 mm) 54 1/4" (1378 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21661562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with Right Drainboard option (R-1)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RDL2436L-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RDL2436R-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RDL2448L-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
RDL2448R-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21761562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RDL2436LR-1 28 1/2" (724 mm) 86" (2184 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RDL2448LR-1 28 1/2" (724 mm) 98 " (2489 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21861562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowls sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RTL2454-1 28 1/2" (724 mm) 62 1/4" (1581 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RTL2472-1 28 1/2" (724 mm) 80 1/4" (2038 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-21961562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RTL2454L-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RTL2454R-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RTL2472L-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
RTL2472R-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with Left Drainboard option (L-1)
R series - 16 gaugeScullery Sinks
www.franke-commercial.com REV-22061562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
R series - 16 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
RTL2454LR-1 28 1/2" (724 mm) 106" (2692 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
RTL2472LR-1 28 1/2" (724 mm) 124" (3150 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-22161562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-22261562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
WSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with drainboard left option (L-1)
W series - 14 gaugeScullery Sinks
www.franke-commercial.com REV-22361562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
www.franke-commercial.com REV-22461562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rearLR = left rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WDL2436-1 28 1/2" (724 mm) 42 1/4" (1073 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WDL2448-1 28 1/2" (724 mm) 54 1/4" (1378 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-22561562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rearLR = left rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with Right Drainboard option (R-1)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WDL2436L-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WDL2436R-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WDL2448L-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
WDL2448R-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com REV-22661562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rearLR = left rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WDL2436LR-1 28 1/2" (724 mm) 86" (2184 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WDL2448LR-1 28 1/2" (724 mm) 98 " (2489 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com 226-A61562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - without drainboard
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WTL2454-1 28 1/2" (724 mm) 62 1/4" (1581 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WTL2472-1 28 1/2" (724 mm) 80 1/4" (2038 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com 226-B61562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard
Waste locationC = centerRR = right rearLR = left rear
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
Drawing shown with right drainboard option (R-1)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left or right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WTL2454L-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WTL2454R-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WTL2472L-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
WTL2472R-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com 226-C61562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
Waste locationC = center
Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.
Floor to Work surFace35" (890 mm)
W series - 14 gaugeScullery Sinks
project inFormation
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple Compartment - drainboard left and right
overall dimensions sink compartment dimensions
model a (Front-Back)
B (leFt-right)
c (Front-Back)
d (leFt-right)
e (depth)
F Backsplash
Waste location
Faucet holes
WTL2454LR-1 28 1/2" (724 mm) 106" (2692 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2
WTL2472LR-1 28 1/2" (724 mm) 124" (3150 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
227
Hospital & Laboratory
61562 | SPECIFICATIONS | 2014
TEST REPORT Ph: 909.472.4100 • Fax 909.472.4243 • Web: www.iapmo.org
5001 East Philadelphia Street • Ontario, California 91761-2816 - USA
Page 1 of 5 This report may not be copied, except in its entirety, without the written permission of IAPMO R&T Lab
Report Number: 934-13036-003
Report Issued: May 7, 2013
Client: Franke Kindred Industries Lab Project No. 20516-002 1000 Kindred Road
Midland, ON, Canada L4R 4K9 Contact: Mr. Cory Macey
Source of Samples: Franke Kindred Industries
Dates of Evaluation: June 18 to June 19, 2012 for Models HWS1414P-00, HWS1420P-00 and HWS1518P-00 April 29, 2013 for Models HWSS1518P-Z8000 and HWSS1518P-Z8000W
Samples Description: Wall-Hung Stainless Steel Hand Hygiene Sinks
Model Description
HWS1414P-00 18.67” X 15” X 18.5”, for a splash or deck mounted faucet, integral drain tailpiece, integral side splash guards.
HWS1420P-00 19.9” X 21” X 37”, for a splash or deck mounted faucet, integral drain tailpiece, integral side and back splash guards.
HWS1518P-00 18” X 15.1’ X 18.5”, for a splash mounted faucet, integral drain tailpiece, integral side splash guards.
HWSS1518P-Z8000 18” X 15.1 X 28-5/8”, with Delta 24T3001 laminar flow electronic faucet with mixing handle.
HWSS1518P-Z8000W 18” X 15.1 X 28-5/8”, coated with white Saniguard, with Delta 24T3001 laminar flow electronic faucet with mixing handle
Scope of Testing: The purpose of testing was to determine whether the samples evaluated of the Stainless Steel Hand Hygiene Sinks met the applicable requirements of Item 19 “Hand Hygienic Sink” of Table 11.1 of CSA Z8000-11, entitled “Canadian Health Care Facilities”.
CONCLUSION: The samples evaluated of the Steel Hand Hygiene Sinks from Franke Kindred Industries models HWS1414P-00, HWS1420P-00, HWS1518P-00, HWSS1518P-Z8000 and HWSS1518P-Z8000WCOMPLIED with the applicable requirements of Item 19 of Table 11.1 of CSA Z8000-11.
Evaluated and Reviewed By,
Ken Wijaya, Sr. Laboratory Director
www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
228
Hospital & Laboratory
61562 | SPECIFICATIONS | 2014
Report No. 934-13036-003 Page 2 of 5
Primary Standard: CSA Z8000-11 Section Evaluated:
Table 11.1, Item 19 Hand Hygienic Sink
Test Results: All evaluations were conducted per the written specification in the specified standard.
CSA Z8000-11
Table 11.1, Item 19 Hand Hygienic Sink
Mandatory:
Hand hygiene sinks shall be constructed and installed as follows:
(a) Materials: COMPLIED (i) Materials shall be non-porous, e.g., porcelain, enamel, vitreous china, or 18 gauge (or thicker) stainless steel. (ii) Granite or marble shall not be used.
Findings: Sinks, models HWS1414P-00, HWS1420P-00, HWS1518P-00 and HWSS1518P-Z8000, were made of 18 gauge 304 stainless steel. Sink, model HWSS1518P-Z8000W, was made of 18 gauge 304 stainless steel coated with non-porous baked enamel (powder coating covered by Saniguard coating).
(b) Size: COMPLIED (i) Hand hygiene sink size shall be sufficient to prevent recontamination (from splashing) during use. Minimum inside dimension should be 350 × 250 mm and a minimum depth of 225 mm. (ii) Cup or bar sinks shall not be used for hand hygiene.
Findings: The size of each sink was more than 350 × 250 mm and a minimum depth of 225 mm.
The bowl inside dimensions were: 356 X 356 mm and depth of 254 mm for model HWS1414P-00 356 X 508 mm and depth of 254 mm for model HWS1420P-00 356 X 356 mm and depth of 254 mm for model HWS1518P-00 356 X 356 mm and depth of 254 mm for model HWSS1518P-Z8000 356 X 356 mm and depth of 254 mm for model HWSS1518P-Z8000W
The sinks were not cup or bar sinks.
(c) Construction: COMPLIED* (i) Hand hygiene sinks shall be shaped to prevent splashing and with a collar directing runoff into the sink basin. (ii) Sink shall not be capable of taking a sink plug. (iii) Sink and spout shall be designed such that splashing and aerosolization is minimized. The spout shall not direct water directly into drain but should hit the basin surface in front of the drain. (iv) Spouts shall be free of aerators\modulators\rose sprays and shall not swivel. (v) Strainers and anti-splash fittings at outlets shall not be used. (vi) The outside rim shall be of minimal width and have the surface angled down towards the inside to prevent pooling of water and placement of objects on the rim.
www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
229
Hospital & Laboratory
61562 | SPECIFICATIONS | 2014
Report No. 934-13036-003 Page 3 of 5
(vii) Traps shall be metal. Gaskets at the skin/drain connection shall be plastic or neoprene. Rubber gaskets shall not be used. (viii)Trap size shall be 40 mm diameter. (ix) Overflows shall not be used. (x) Adequate flow rate shall be provided to ensure the removal of soap residue.
Findings: The hand hygiene sinks tested were shaped to prevent splashing. The sinks had integral drain tailpiece, designed for not taking a sink plug. Sinks were designed such that splashing is minimized. The installation instructions was provided with a statement “The faucet spout must not be installed to spray directly into the drain fitting.” Models HWS1414P-00, HWS1420P-00 and HWS1518P-00: The spout/faucet to be supplied by others*. Models HWSS1518P-Z8000 and HWSS1518P-Z8000W: Delta Faucet model Delta 24T3001 was supplied. The spout did not direct water directly into drain. The flow hit the basin surface. Spout was free of aerators\modulators\rose sprays and did not swivel. The outside rim was of minimal width and was designed to prevent pooling of water and placement of objects on the rim. The metal trap to be supplied by others*. No overflows was be used. *Note: Compliant with aerosolization, no strainers usage, anti-splash fittings at outlets, usage of trap and adequate faucet flow rate are depended on the actual field installation.
(d) Location: COMPLIED** (i) Sinks shall be wall-mounted and at least 1 m away from any fixed work surface or separated by a splash barrier. Sinks shall not be inserted into or immediately adjacent to a counter. (ii) Hand hygiene sinks shall be installed at least 865 mm above the floor and shall not have storage underneath (due to proximity to sanitary sewer connections and risk of leaks or water damage).
Findings: The hand hygiene sinks tested were wall-hung units with integral side splash guards. **Note: Compliant with installation at least 865 mm above the floor and shall not have storage underneath are depended on the actual field installation.
(e) Controls: COMPLIED*** (i) Taps and controllers shall be hands free. Electric eye, foot pedal, or faucet blade controls may be used. Electric eye operation shall be triggered by hand, not body, placement. A means shall be provided to control the temperature. (ii) Automatic temperature control shall not be used. (iii) Electric eye technology shall have a backup that allows for operation during power interruptions and shall have a means for users to adjust water temperature adjacent to the sink.
Findings: Models HWS1414P-00, HWS1420P-00, HWS1518P-00: Tap and controller are to be supplied by others***. ***Note: Compliant to these requirements is depended on the actual field installation. Models HWSS1518P-Z8000 and HWSS1518P-Z8000W: Tap and control was a Delta Faucet sensor faucet, model 24T3001 with electric eye on-off valve and lever handle to control the temperature. The sensor faucet was equipped with a battery backup that allowed during power interruptions. The faucet had a means for users to adjust water temperature adjacent to the sink.
www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
230
Hospital & Laboratory
61562 | SPECIFICATIONS | 2014
Report No. 934-13036-003 Page 4 of 5
(f) Backsplash: COMPLIED****
(i) Adjacent wall surfaces shall be protected from splashes with impermeable back/side splashes. Backsplashes shall be seam free. All edges shall be sealed with a waterproof barrier.
Backsplashes shall include the area under the paper towel dispenser and soap dispenser. (ii) Backsplashes shall extend a minimum 600 mm above sink level and a minimum of 250 mm below sink level.
Findings: For models HWS1414P-00, HWS1518P-00, HWSS1518P-Z8000 and HWSS1518P-Z8000W, backsplash to be provided by others****. ****Note: Compliant to these requirements is depended on the actual field installation.
For model HWS1420P-00, it had an integral back and side splash guards. The backsplash was seam free. All edges were sealed as the backsplash was an integral part of the sink. Backsplash included the area under the paper towel dispenser and soap dispenser. Backsplashes extended 686 mm above sink flood level and 254 mm below sink flood level.
(g) Soap and lotion dispensers: NOT APPLICABLE (i) Liquid soap and lotion dispensers shall have hands free operation and mounted to permit unobstructed access and minimize splashing or dripping onto adjacent wall and floor surfaces. (ii) Liquid dispensers (soap or lotion) shall use non-refillable bottles and shall be placed to prevent splash-up contamination.
Findings: Soap and lotion dispensers are to be provided by others. Note: Compliant to these requirements is depended on the actual field installation.
Hand drying: NOT APPLICABLE(a) Single-use paper towels shall be provided. Cloth drying towels shall not be used. (b) Towel dispensers shall be mounted to permit unobstructed access and minimize splashing or dripping onto adjacent wall and floor surfaces. (c) Towel dispenser design shall be such that towels are dispensed singly. They shall either be hands-free or designed so that only the towel is touched during removal of towel for use. (d) Hot-air dryers shall not be used for hand hygiene sinks. (e) Paper waste receptacles shall be a corrosion free material and wide mouth design. (f) Space shall be allowed for the placement of waste bins in close proximity to the hand hygiene sink. (g) To avoid recontamination of the hands, paper towels should be available to use on the exit door hardware and a trash container for used towels should be located near the exit door. (h) Bins, with a waste bag, shall be provided in close proximity to each hand hygiene sink. If bins are lidded the bin shall be foot-pedal operated.
Findings: Paper towel dispenser to be provided by others. Note: Compliant to these requirements is depended on the actual field installation.
Accessible sinks: NOT APPLICABLE(a) Hand hygiene sinks shall be located at a level where they can used by people in wheelchairs and shall be available as per HCF requirements. These are in addition to hand hygiene sinks used by staff. (b) Hand hygiene sinks should be in accordance with ASME A112.19.2/CSA B45.1. Wheelchair accessible sinks should be wall mounted, made of vitreous china, 510 mm long by 685 mm wide, slab type provided with combination centre set faucets, gooseneck spout, open drain with perforated strainer, and 32 mm cast brass adjustable P-trap with tailpiece.
Findings: The sinks are not intended to be used as accessible sinks.
www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
231
Hospital & Laboratory
61562 | SPECIFICATIONS | 2014
Report No. 934-13036-003 Page 5 of 5
HWS1414P-00 HWS1420P-00 HWS1518P-00
HWSS1518P-Z8000 HWSS1518P-Z8000W
23261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Integral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2" threaded tailpiece for use with offset waste. - SANIGUARD® product protection is effective against most common bacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.
Overall front to back: 19 3/4" (502 mm) Overall left to right: 16" (406 mm) Overall height: 28" (711 mm)
Bowl front to back: 13 1/2" (343 mm) Bowl left to right: 13" (330 mm) Bowl depth: 10" (254 mm)
SSU1-2016-0016" (406 mm) overall width with 13" (330 mm) wide sink compartment
technIcAl dAtA
Gross weight 32 kgType of waste kit threaded tailpiece Back splash yes Undercoated no Waste hole position centre Back splash height 5 1/8" (130 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSU1-2016-00Hospital and Laboratory Sinks
23361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Integral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2" threaded tailpiece for use with offset waste. - SANIGUARD® product protection is effective against most common bacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.
Overall front to back: 19 3/4" (502 mm) Overall left to right: 20" (508 mm) Overall height: 28" (711 mm)
Bowl front to back: 13 1/2" (343 mm) Bowl left to right: 17" (432 mm) Bowl depth: 10" (254 mm)
SSU1-2020-0020" (508 mm) overall width with 17" (431 mm) wide sink compartment
technIcAl dAtA
Gross weight 40 kgType of waste kit threaded tailpiece Back splash yes Undercoated no Waste hole position centre Back splash height 5 1/8" (130 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSU1-2020-00Hospital and Laboratory Sinks
23461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Inte-gral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2"threaded tailpiece for use with offset waste.- SANIGUARD® product protection is effective against most commonbacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.
Overall front to back: 19 3/4" (502 mm) Overall left to right: 40" (1016 mm) Overall height: 28" (711 mm)
Bowl left to right: 37 1/2" (953 mm) Bowl front to back: 13 1/2" (343 mm) Bowl depth: 10" (254 mm)
SSU2-2040-0040" (1016 mm) overall width with 37 1/2" (953 mm) wide sink compartment
technIcAl dAtA
Gross weight 70 kgType of waste kit threaded tailpiece Back splash yes Undercoated no Waste hole position centre Back splash height 5 1/8" (130 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSU2-2040-00Hospital & Laboratory
REV-23561562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Franke hygenic waste with integral talipiece. (No separate waste fitting required) Access panel for service and maintenance. Supplied with wall hanger brackets. Certified to ASME A112.19.3-2008 / CSA B45.4-08.For models with faucets: Faucets certified to CSA B125 and ANSI/ASME A112.18.1, but are not listed with IAPMO (UPC) or NSF.
Overall front to back: 23" (584 mm) Overall left to right: 30" (762 mm) Overall height: 26" (660 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 27" (686 mm) Bowl depth: 12" (305 mm)
SSU1-00Faucet not included. Please specify hole drilling requirement when ordering.
technIcAl dAtA
Gross weight 49 kgBack splash yes Undercoated no Waste hole position left side Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
SSU1-10
3000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU1-11
3000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve C621T AC powered hands-free soap dispenser Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU1-20
3001T3370A battery operated hands-free faucet R2570-MIXLF thermostatic mixing valve
SSU1-00, SSU1-10, SSU1-11, SSU1-20Hospital & Laboratory
23661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
SSU1 Rough-in Information
SSU1 SERIESHospital & Laboratory
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Clip is 12 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
REV-23761562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Franke hygenic waste with integral talipiece. (No separate waste fitting required) Access panel for service and maintenance. Removable divider. Please specify hole drilling requirement when ordering. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 23" (584 mm) Overall left to right: 60" (1524 mm) Overall height: 26" (660 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 57" (1448 mm) Bowl depth: 12" (305 mm)
SSU2-00Faucet not included. Please specify hole drilling requirement when ordering.
technIcAl dAtA
Gross weight 70 kgBack splash yes Undercoated no Waste hole position left side Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
SSU2-10
3000T3370A AC powered hands-free faucets (2pcs) R2570-MIXLF thermostatic mixing valves(2pcs) Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU2-113000T3370A AC powered hands-free faucets(2pcs) R2570-MIXLF thermostatic mixing valves(2pcs) C621T AC powered hands-free soap dispensers (2pcs) Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU2-203001T3370A battery operated hands-free faucets(2pcs) R2570-MIXLF thermostatic mixing valves(2pcs)
SSU2-00, SSU2-10, SSU2-11, SSU2-20Hospital & Laboratory
23861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
SSU2 Rough-in Information
SSU2 SERIESHospital & Laboratory
Back side of unit is open
Clips to be positioned as required
Clip is 12 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
REV-23961562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Triple compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Access panel for service and maintenance. Removable dividers. 1 1/2" (38mm) grid strainer. Please specify hole drilling requirement when ordering. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 23" (584 mm) Overall left to right: 90" (2286 mm) Overall height: 26" (660 mm)
Bowl front to back: 17 1/2" (445 mm) Bowl left to right: 87" (2210 mm) Bowl depth: 12" (305 mm)
SSU3-00Faucet not included. Please specify hole drilling requirement when ordering.
technIcAl dAtA
Gross weight 105 kgBack splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
SSU3-103000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU3-113000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve C621T AC powered hands-free soap dispenser Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.
SSU3-203001T3370A battery operated hands-free faucet R2570-MIXLF thermostatic mixing valve
SSU3-00, SSU3-10, SSU3-11, SSU3-20Hospital & Laboratory
24061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
261/
16"
[66.
2cm
]
15" [38.1cm]
30" [76.2cm]30" [76.2cm]
FLOOR
1" [2.5cm]
4" [10.16cm]
FROM FLOOR
ø3/8" [ø1.0cm TYP]2" [5.1cm]
231/
4"[5
9.1c
m]
Lc
CLIP DETAIL
29" [73.7cm]29" [73.7cm]29" [73.7 cm]
REMOVABLEDIVIDERS
88 1/2" [225cm]
11" [2 7.9cm]
6 1/2" [16.5 cm]
4" [10.2cm]
23"
[58.
4cm
]
7 1/4" [18.4 2cm]
15 3/4" [40.0c m]
90" [228.6cm]
5" [12.7cm]
ø 5/16" [0.8cm]
1"[2.5cm]
1/2"[1.3cm]
1"[2.5cm]
1"[2.5cm]
NOTE: 1) BACK SIDE OF
UNIT IS OPEN
2) CLIPS TO BEPOSITIONED ASREQUIRED
3) CLIP IS 12 GA UGE GALVANIZED STEEL
CAN BE MOUNTED TOPOURED CONCRETEOR BLOCK WALL WITHO UTTHE USE OFA SINK CARRIER
SSU3 Rough- inInformation
� � � �
�
�CLIP DETAIL
SSU3 Rough-in Information
SSU3 SERIESHospital & Laboratory
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Clip is 12 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
24161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Hands-free gooseneck faucet with laminar flow. Wall mountable water-proof control box. Preset/adjustable sensor range 3" to 15". Water flows when sensor is activated. Water flow stops at the selected run-on time after user removes hands from sensing zone. Run-on time selections are 0 to 8 seconds or 1 to 8 minutes for scrub-up applications. Factory set to 0 seconds. Blocking time between uses has selectable range of 1 to 8 seconds. Factory set to 1 second. Adjustable response time. Auto shut-off feature. Optional metered program mode with selection of 7 to 240 seconds of continuous operation. Adjustable sensing distance 76 to 381mm (3" to 15") factory set to 254mm (10") (± 1.0").CSA certified. Complies to ASME A112.18.1/CSA B125.1. ADA compliance to ICC / ANSI A117.1/ADA. Verified compliant with 0.25% weighted average Pb content regulations.
Overall front to back: 5 3/8" (136 mm) Overall left to right: 2 1/4" (57 mm) Overall height: 12 1/2" (317 mm)
3000T3370AAC powered (included with SSU-10 and SSU-11 models)
technIcAl dAtA
Material casing brass Gross weight 2.5 kgType of operation sensor operation
3001T3370ABattery operated hands-free faucet included with SSU-20 models.
technIcAl dAtA
Material casing brass Type of operation sensor operation Position of power connection from bottom
R2570-MIXLFDelta thermostatic mixing valve included with SSU_-10, SSU_-11 and SSU_-20 models.
Listed to ASSE 1069, ASSE 1070 and CSA B125.3
No drawing available
3000T3370A, 3001T3370A, R2570-MIXLFHospital & Laboratory
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
24261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wall mounted electronic soap dispenser. Type 304 (CNS 18/10) stainless steel. When user puts hand under nozzle a dose of soap will drop. Adjust-able (1 to 3 sec) quantity of soap delivered through a self priming pump. Electrontic circuit, container and pump contained in 20 gauge (0.9mm) stainless steel box to be fixed to the wall. Outer casing is 16 gauge (1.5mm) thick to be fixed with vandal resistant stainless steel screws. Infrared electronic circuit indowed with built-in automatic anti-dripping device. Capacity of soap container is 1 litre. Pump of soap dispenser made of anti-acid material allowing use of soap or disinfectant of any density. As a part of regular maintenance and to prevent splashing, keep spout-nozzle (7.5) clean, so that soap does not dry on it. CSA - 18VAC plug-in transformer included.
Ships with models SSU-11, SSU2-11 and SSU3-11 optional: TB-9 hard wire transformer to operate up to 9 units.
C621T
C621THospital & Laboratory
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
No drawing available
24361562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Clinical hand wash basin. Left waste location with open access to allow for easy cleaning of P-Trap. Integral 1 1/2" (38mm) waste welded to bottom of the sink bowl. 18 gauge (1.2mm), type 304 (CNS 18/10) stain-less steel. Polished #4 satin finish. Radius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance
Separate sink carrier is not required. This fixture is coated with SANIGUARD® product protection.SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms.
Overall front to back: 17 9/16" (446 mm) Overall left to right: 14 5/16" (363 mm) Overall height: 15 1/16" (382 mm)
Bowl front to back: 14 3/8" (365 mm) Bowl left to right: 14" (356 mm) Bowl depth: 9" (229 mm)
AWHB1414P-00
technIcAl dAtA
Gross weight 10 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 6" (152 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
AWHB1414P-00Hospital & Laboratory
24461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
SSU backsplash accessory for SSU1, SSU2 and SSU3 surgeon scrub sinks. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. The SSU-BS provides a means to conceal the mixing valve and faucet controls inbehind the front access panel. The SSU-BS also protects the back wall from splashing and provides a means to mount a splash mounted faucet, soap and paper towel dispenser.
For SSU2 and SSU3, order and install 2 or 3pcs respectively.
SSU-BS
technIcAl dAtA
Gross weight 9.5 kg
SSU-BSHospital & Laboratory
24561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending
Overall front to back: 18 11/16" (475 mm) Overall left to right: 15" (381 mm) Overall height: 18 1/2" (470 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
HWS1414P-00
technIcAl dAtA
Gross weight 15 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
relAted ProdUct
HWS-RS-00Removeable Shroud
HWS1414P-00Hospital & Laboratory
24661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
HWS1414P-00Hospital & Laboratory
ROUGH-IN DETAILS
FOR REFERENCE ONLY. VERIFY AGAINST ACTUAL SINK PRIOR TO INSTALLATION.
61562 | SPECIFICATIONS | 2014
24761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. This hand hygiene sink is wider to permit forearm washing for light procedures as well as for mounting of paper towel and soap dispensers within the splash guard. Due to the large size of the backsplash, an additional rear wall splash guard is not required to comply with the Z8000 guidelines. Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending
Overall front to back: 19 3/16" (487 mm) Overall left to right: 21" (533 mm) Overall height: 37 15/16" (964 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 20" (508 mm) Bowl depth: 10" (254 mm)
HWS1420P-00
technIcAl dAtA
Gross weight 27 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 26 1/2" (673 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
HWS1420P-00Hospital & Laboratory
24861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
HWS1420P-00Hospital & Laboratory
ROUGH-IN DETAILS
25161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Z8000 Compliant Antimicrobial Hand Hygiene Sink with integral shroud. 18 gauge (1.2mm) type 304 stainless steel. Right rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled, splash mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending
Overall front to back: 18" (457 mm) Overall left to right: 15" (381 mm) Overall height: 28 5/8" (727 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
HWSS1518P-00
technIcAl dAtA
Gross weight 18 kgType of mounting wall mounting Waste size DN 40 Type of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear right Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
HWSS1518P-00 - no hole HWSS1518P-00/1 - 1 hole ∅1 1/8" (29mm) 9" (228mm) from top of basin, with anti rotation pin hole ∅0.25" (6.3mm) below. HWSS1518P-00/1W - Same as above with white Saniguard coating.
HWSS1518P-00Hospital & Laboratory
25261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
HWSS1518P-00Hospital & Laboratory
ROUGH-IN DETAILS
252-A61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in (or undermount) medical hand wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment is angled to reduce splashing and waste is offset to reduce the risk of any bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, sound deadening pads, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Right rear waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.
Overall front to back: 12 3/16" (309 mm) Overall left to right: 18" (461 mm)
Bowl front to back: 10" (254 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
HWS0610P-3
technIcAl dAtA
Gross weight 5.44 kgType of waste kit 1 1/2" (38mm) duplex waste assembly
with rubber stopper and 1 1/2" (DN38) brass tailpiece
Type of mounting drop in or undermountFaucet ledge noUndercoated yesWaste hole position right rearOverflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
HWS0610P-3Hospital & Laboratory
252-B61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in (or undermount) medical hand wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment is angled to reduce splashing and waste is offset to reduce the risk of any bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, sound deadening pads, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Right rear waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.
Overall front to back: 21 1/2" (546 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
HWS6810P-3
technIcAl dAtA
Gross weight 7.25 kgType of waste kit 1 1/2" (38mm) duplex waste assembly
with rubber stopper and 1 1/2" (DN38) brass tailpiece
Type of mounting drop in or undermountFaucet ledge noUndercoated yesWaste hole position right rearOverflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
HWS6810P-3Hospital & Laboratory
25361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 16 1/4" (413 mm) Overall left to right: 17" (432 mm) Overall height: 14 1/16" (357 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
WHB1616-3
technIcAl dAtA
Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1616-3/1 - 1 hole 1 1/2"(38mm) WHB1616-3/2 - 2 hole, 1 1/2" (38mm) diameter, 4"(102mm) centerset WHB1616-3 - Custom (non-returnable), specify hole drilling
WHB1616-3Wash Basins
25461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 17" (432 mm) Overall left to right: 16 1/2" (419 mm) Overall height: 9 3/4" (247 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
WHB1617-61 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece , with overflow
technIcAl dAtA
Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1617-6/1, 1 hole, 1 1/2" diameter WHB1617-6/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617-6, Custom (non-returnable)
WHB1617-6Wash Basins
25561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 17" (432 mm) Overall left to right: 16 1/2" (419 mm) Overall height: 9 3/4" (247 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
WHB1617-7accepts 1 1/4" (32mm) waste assembly (not included)
technIcAl dAtA
Gross weight 5 kgType of waste kit optional grid strainer Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1617-7/1, 1 hole, 1 1/2" diameter WHB1617-7/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617-7, Custom (non-returnable)
WHB1617-7Wash Basins
25661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 17" (432 mm) Overall left to right: 16 1/2" (419 mm) Overall height: 9 3/4" (247 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
WHB1617-31 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece
technIcAl dAtA
Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1617-3/1, 1 hole, 1 1/2" diameter WHB1617-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617-3, Custom (non-returnable)
WHB1617-3Wash Basins
25761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB1617 SERIESWash Basins
WHB1617 Rough-in Information
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Hanger bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
25861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. 16 gauge (1.5mm) side wall brackets. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 10 3/4" (273 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
WHB1819-31 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece
technIcAl dAtA
Gross weight 6 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1819-3/1, 1 hole, 1 1/2" diameter WHB1819-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1819-3, Custom (non-returnable)
WHB1819-3Wash Basins
25961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. 16 gauge (1.5mm) side wall brackets. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 10 3/4" (273 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
WHB1819-61 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2"(DN40) brass tailpiece, with overflow
technIcAl dAtA
Gross weight 6 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1819-6/1, 1 hole, 1 1/2" diameter WHB1819-6/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1819-6, Custom (non-returnable)
WHB1819-6Wash Basins
26061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. 16 gauge (1.5mm) side wall brackets. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 10 3/4" (273 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
WHB1819-7accepts 1 1/4" (32mm) waste assembly (not included)
technIcAl dAtA
Gross weight 6 kgType of waste kit optional grid strainer Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHB1819-7/1, 1 hole, 1 1/2" diameter WHB1819-7/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1819-7, Custom (non-returnable)
WHB1819-7Wash Basins
26161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB1819 Rough-in Information
WHB1819 SERIESWash Basins
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Hanger bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
61562 | SPECIFICATIONS | 2014
26261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 14 1/4" (362 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
WHBS181910-3
technIcAl dAtA
Gross weight 8 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WHBS181910-3/1, 1 hole, 1 1/2" diameter WHBS181910-3/3, 3 hole, 1 1/2" diameter, 4" center set WHBS181910-3, custom / non-returnable, faucet holes to be specified at time of order
WHBS181910-3Wash Basins
26361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHBS181910Wash Basins
Back side of unit is open
Clips to be positioned as required
Hanger bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
26461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall Hung Basin. Designed for either new installation or for replacement / retrofit onto select vitreous china wall carriers. Center back waste location. 18 gauge (1.2 mm) type 304 (CNS18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. Grid strainer and one piece wall hanger bracket included. The edge is formed as an anti spill rim. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Available with optional shroud (WHB2221-RS) to cover the trap and water supplies. A third piece may be ordered for full under enclosure (WHB2221-UC). Model complies with ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.
Overall front to back: 20 15/16" (532 mm) Overall left to right: 21 1/2" (546 mm) Overall height: 11 7/8" (302 mm)
Bowl front to back: 13" (330 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 5" (127 mm)
WHB2221-7no overflow
technIcAl dAtA
Gross weight 7 kgWaste size DN 32 Type of waste kit grid waste with concealed threaded
connection Faucet ledge yes Back splash yes Undercoated no Waste hole position centre back Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
WHB2221-7/1, 1 hole 1 1/2" (38mm) diameter WHB2221-7/3, 3 hole 1 1/4" (32mm) diameter, 4" (102mm) centreset WHB2221-7, Custom (non-returnable), specify hole drilling
WHB2221-7Wash Basins
26561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall Hung Basin. Designed for either new installation or for replacement / retrofit onto select vitreous china wall carriers. Center back waste location. 18 gauge (1.2 mm) type 304 (CNS18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. Grid strainer and one piece wall hanger bracket included. The edge is formed as an anti spill rim. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Available with optional shroud (WHB2221-RS) to cover the trap and water supplies. A third piece may be ordered for full under enclosure (WHB2221-UC).
Model complies with ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.
Overall front to back: 20 15/16" (532 mm) Overall left to right: 21 1/2" (546 mm) Overall height: 11 7/8" (302 mm)
Bowl front to back: 13" (330 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 5" (127 mm)
WHB2221-8with overflow
technIcAl dAtA
Gross weight 7 kgWaste size DN 32 Faucet ledge yes Back splash yes Undercoated yes Waste hole position centre back Back splash height 4" (102 mm)Faucet hole position middle Overflow yes Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
model oPtIonS
WHB2221-8/1, 1 hole 1 1/2" (38mm) diameter WHB2221-8/3, 3 hole 1 1/4" (32mm) diameter, 4" (102mm) centreset WHB2221-8, Custom (non-returnable), specify hole drilling
WHB2221-8Wash Basins
26661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB2221 SERIESWash Basins
ROUGH-IN DETAILS
METHOD AInstallation without an in-wall carrier
METHOD BInstallation using an in-wall carrier
www.franke-commercial.com 26761562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB2221-RSRemovable shroud for WHB2221 series basin. Made from 18 gauge (1.2mm) stainless steel. Shroud measures 8"(203mm) wide and extends 12.5"(317mm) below the bottom of the basin. The shroud is satin finished.
WHB2221-UCUnder cover for WHB2221-RS removable shroud.
WHB2221-RS, WHB2221-UCWash Basins
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
www.franke-commercial.com 26861562 | SPECIFICATIONS | REV. NOV_2015
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Designer double hand wash basin. 16 gauge 1.8mm thick T304 (CNS 18/10) stainless steel. Exposed surfaces are polished to a #4 satin finish. 1 ¼" (DN 32) waste fitting included with vandal resistant laser cut pyramid waste cover. Basin is installed using wall brackets, no separate carrier is required. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 21 1/2" (546 mm) Overall left to right: 52" (1321 mm) Overall height: 12 1/16" (306 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 48" (1219 mm) Bowl depth: 5" (127 mm)
WHB5222-7
technIcAl dAtA
Type of basin Single bowlGross weight 29.5 kgNet weight 14.5 kgType of mounting wall mounting Waste size DN 32 Waste kit included yes Type of waste kit grid waste with concealed threaded
connection Faucet ledge yes Back splash yes Bowl shape rectangle Number of bowls 1 Number of faucet holes 2 Noise prevention yes Undercoated yes Back splash height 4" (102 mm)Faucet hole diameter 1 1/2" (38 mm)Overflow no model oPtIonS
WHB5222-7/2, 2 faucet holes, 1 1/2" (38mm) diameter. WHB5222-7, Custom (non-returnable), specify hole drilling.
WHB5222-7Wash Basins
27061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 340x300x140 mm, rectangular shape, 120 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Optional shroud also available (refer to specification page WT-RS)
Overall front to back: 17 13/16" (452 mm) Overall left to right: 15 3/4" (400 mm) Overall height: 5 7/8" (150 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 13 3/8" (340 mm) Bowl depth: 5 9/16" (142 mm)
WT400C-7Custom hole drilling, specifiy when ordering, no overflow, accepts 1 1/4" (32mm) waste - not included.
technIcAl dAtA
Gross weight 3.9 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Waste hole position centre back Overflow no model oPtIonS
WT400C-7, Custom (non returnable), specify hole drilling WT400C-7/1, 1 hole 1 3/8" (35mm)
WT400C-8With overflow, accepts 1 1/4" (32mm) waste - not included.
technIcAl dAtA
Gross weight 3.9 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Waste hole position centre back Overflow yes model oPtIonS
WT400C-8, Custom (non returnable), specify hole drilling WT400C-8/1, 1 hole 1 3/8" (35mm)
WT400C-7, WT400C-8Wash Basins
27161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 400x300x135 mm, rectangular shape, 105 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Optional shroud also available (refer to specification page WT-RS)
Overall front to back: 17 9/16" (446 mm) Overall left to right: 19 11/16" (500 mm) Overall height: 5 7/8" (150 mm)
Bowl front to back: 11 7/16" (291 mm) Bowl left to right: 15 3/4" (400 mm) Bowl depth: 5 9/16" (141 mm)
WT500C-7custom hole drilling, specify when ordering, no oveflow, accepts 1 1/4" (32mm) waste - not included.
technIcAl dAtA
Gross weight 4.5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 11/16" (220 mm)Rear upstand no Overflow no model oPtIonS
WT500C-7, Custom (non returnable), specify hole drilling WT500C-7/1, 1 hole 1 3/8" (35mm)
WT500C-8With overflow, accepts 1 1/4" (32mm) waste - not included
technIcAl dAtA
Gross weight 4.5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 11/16" (220 mm)Rear upstand no Overflow yes model oPtIonS
WT500C-8, Custom (non returnable), specify hole drilling WT500C-8/1, 1 hole 1 3/8" (35mm)
WT500C-7, WT500C-8Wash Basins
27261562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 550x350x145 mm, rectangular shape, 90 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Optional shroud also available (refer to specification page WT-RS)
Overall front to back: 18 7/8" (480 mm) Overall left to right: 23 5/8" (600 mm) Overall height: 5 7/8" (150 mm)
Bowl front to back: 13 3/8" (340 mm) Bowl left to right: 21 1/4" (540 mm) Bowl depth: 5 3/4" (146 mm)
WT600C-7Custom hole drilling, specify when ordering, no overflow, accepts 1 1/4" (32mm) waste - not included.
technIcAl dAtA
Gross weight 5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 1/4" (210 mm)Rear upstand no Overflow no model oPtIonS
WT600C-7, Custom (non returnable), specify hole drilling WT600C-7/1, 1 hole 1 3/8" (35mm)
WT600C-8With overflow,accepts 1 1/4" (32mm) waste - not included.
technIcAl dAtA
Gross weight 5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 1/4" (210 mm)Rear upstand no Overflow yes model oPtIonS
WT600C-8, Custom (non returnable), specify hole drilling WT600C-8/1, 1 hole 1 3/8" (35mm)
WT600C-7, WT600C-8Wash Basins
27361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Trap cover manufactured from 18 gauge, type 304 stainless steel. Exposed surfaces are satin finished. For wall mount installation of wash basin models WT400C, WT500C, WT600C and WHB1617 series.
Overall front to back: 10 1/2" (267 mm) Overall left to right: 6 1/2" (165 mm) Overall height: 15 3/4" (400 mm)
WT-RS
technIcAl dAtA
Gross weight 3 kgType of mounting wall mounting
WT-RSWash Basins
27461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment corner wall mount wash basin wtih faucet ledge. Center waste location. 19 gauge (1.0mm) 18/10 stainless steel. Exposed surfaces are brushed finish. Includes installation kit. Accepts 1 1/4" (32mm) waste (not included).
Bowl front to back: 4 3/4" (121 mm) Bowl left to right: 11 7/16" (290 mm) Bowl depth: 6 1/8" (155 mm)
WT310E-7
technIcAl dAtA
Gross weight 2.7 kgWaste size DN 32 Faucet ledge yes Undercoated no Waste hole position centre Overflow no Certificates and approvals LEED MR credit 4: recycled content
(1-2 points), cUPC approval model oPtIonS
WT310E-7 - Custom (non returnable), specify hole drilling WT310E-7/1 - 1 hole, 1 3/8" (35mm) diameter
WT310E-7Wash Basins
27561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Pedestal/Wall Hung Basin with faucet ledge made from 18 gauge (1.2mm) type 304 stainless steel. Polished satin finish. Radius coved bowl corners. Includes wall hanger bracket and 1 1/2" (38mm) duplex waste assembly, location centre. Please allow 4 weeks for delivery.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 40" (1016 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
FWHB1819-3
technIcAl dAtA
Gross weight 24.1 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Back splash yes Waste hole position centre Back splash height 9 13/16" (250 mm)Overflow no Certificates and approvals LEED MR credit 4: recycled content
(1-2 points), cUPC approval
FWHB1819-3Wash Basins
27661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall service sink. Center waste location. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 19" (483 mm) Overall left to right: 20" (508 mm) Overall height: 25" (635 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 17" (432 mm) Bowl depth: 13" (330 mm)
WSS6713no faucet hole / custom drilling
technIcAl dAtA
Gross weight 27 kgWaste size DN 50 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
model oPtIonS
WSS6713/2, 2 hole, 1 1/4" diameter, 8" centerset WSS6713, Custom, non-returnable
WSS6713Wash Basins
27761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WSS6713Wash Basins
WSS6713 Rough-in Information
5/16 Diameter holes typical
2 Clips to be positioned as required
Clip is 12 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
61562 | SPECIFICATIONS | REV2016 279-Awww.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wash BasinsANMW0010
Exos single wash basin made of MIRANIT, resin-bonded mineral compos-ite, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting.
It has a seamless molded bowl, no overflow and lowered faucet ledge with faucet hole 1 3/8"" (35 mm) diameter. Mounting material and waste cover with InoxPlus coating included. Colour: Alpine white
Overall front to back: 19 11/16" (500 mm) Overall left to right: 23 5/8 (600 mm) Overall height: 5" (125 mm) Bowl front to back: 13 3/8 (340 mm) Bowl left to right: 15 (380 mm) Bowl depth: 3 9/16" (90 mm)
ANMW00101 3/8" (35 mm) Faucet hole
technIcAl dAtA
Gross weight 17.55 kg / 38.60 lbs.Waste size 1 3/8" (DN 50)Waste hole position centre Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
61562 | SPECIFICATIONS | REV2016 279-Bwww.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Wash BasinsANMW0011
Exos single wash basin made of MIRANIT, resin-bonded mineral composite, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting.
It has a seamless molded bowl, no overflow and lowered faucet ledge with faucet hole 1 3/8"" (35 mm) diameter. Mounting material and waste cover with InoxPlus coating included. Colour: Alpine white
Overall front to back: 19 11/16" (500 mm) Overall left to right: 35 7/16 (900 mm) Overall height: 5" (125 mm) Bowl front to back: 13 3/8 (455 mm) Bowl left to right: 19 11/16'' (500 mm) Bowl depth: 3 9/16" (90 mm)
ANMW00111 3/8" (35 mm) Faucet hole
technIcAl dAtA
Gross weight 25.05 kg / 55.10 lbs.Waste size 1 3/8" (DN 50)Waste hole position centre Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
28161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral corner splashguard. Can be installed in either left or right corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower waste. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 24" (610 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 21 1/2" (546 mm) Bowl depth: 10" (254 mm)
FSS222210/316-1
technIcAl dAtA
Gross weight 25 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSS222210/316-1Utility Sinks
28261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Drop front feature facilitates easy drainage of power driven floor maintenance equipment. Undercoated to reduce condensation and resonance. One piece wall hangers.Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 33 1/2" (851 mm) Bowl depth: 10" (254 mm)
FSSOL223410/316-1
technIcAl dAtA
Gross weight 31 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSSOL223410/316-1Utility Sinks
28361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Drop front feature facilitates easy drainage of power driven floor maintenance equipment. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 33 1/2" (851 mm) Bowl depth: 10" (254 mm)
FSSOR223410/316-1
technIcAl dAtA
Gross weight 31 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSSOR223410/316-1Utility Sinks
28461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower waste. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 33 1/2" (851 mm) Bowl depth: 10" (254 mm)
FSSL223410/316-1
technIcAl dAtA
Gross weight 32 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSSL223410/316-1Utility Sinks
28561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard right and rear sides. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 36" (914 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 33 1/2" (851 mm) Bowl depth: 10" (254 mm)
FSSR223410/316-1
technIcAl dAtA
Gross weight 32 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSSR223410/316-1Utility Sinks
28661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard back and side. Can be installed in either left or right corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 24" (610 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 21 1/2" (546 mm) Bowl depth: 10" (254 mm)
FSS2210/316-1
technIcAl dAtA
Gross weight 25 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSS2210/316-1Utility Sinks
28761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Can be installed in either left or right corners. Comes with integral back splash and side splash. Drop front feature to facilitate easy drainage of power driven floor maintenance equipment. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 24" (610 mm) Overall left to right: 24" (610 mm)
Bowl front to back: 21 1/2" (546 mm) Bowl left to right: 21 1/2" (546 mm) Bowl depth: 10" (254 mm)
FSSO2210/316-1
technIcAl dAtA
Gross weight 25 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
FSSO2210/316-1Utility Sinks
28861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment sewage sampling sink without drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4"(19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 21" (533 mm) Overall left to right: 29" (737 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 27" (686 mm) Bowl depth: 15" (381 mm)
SSS1827
technIcAl dAtA
Gross weight 70 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSS1827Utility Sinks
28961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment sewage sampling sink with left/right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 21" (533 mm) Overall left to right: 45" (1143 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 22" (559 mm) Bowl depth: 15" (381 mm)
SSS1827SDSRright drain board
technIcAl dAtA
Gross weight 80 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position right Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSS1827SDSRUtility Sinks
29061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment sewage sampling sink with left/right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 21" (533 mm) Overall left to right: 45" (1143 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 22" (559 mm) Bowl depth: 15" (381 mm)
SSS1827SDSLleft drain board
technIcAl dAtA
Gross weight 80 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position left Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSS1827SDSLUtility Sinks
29161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment sewage sampling sink left and right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.
Overall front to back: 21" (533 mm) Overall left to right: 64" (1626 mm)
Bowl front to back: 18" (457 mm) Bowl left to right: 22" (559 mm) Bowl depth: 15" (381 mm)
SSS1827DDS
technIcAl dAtA
Gross weight 90 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position left & right Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SSS1827DDSUtility Sinks
29261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment wash trough. Center waste location. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.TechnicAl dATA
Gross weight 35 kg (WTS2025-1) 45 kg (WTS2031-1) 51 kg (WTS2036-1) 67 kg (WTS2048-1) 85 kg (WTS2060-1) 103 kg (WTS2072-1) 127kg (WTS2096-1) Waste size DN 40 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Heavy Duty Series WTSUtility Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
overAll dimenSionS Sink comPArTmenT dimenSionS
model A (fronT-BAck)
B (lefT-righT)
c (fronT-BAck)
d (lefT-righT)
e (dePTh)
f BAckSPlASh
WASTe locATion
fAUceT holeS
WTS2025-1 20" (508 mm) 25" (635 mm) 16 1/2" (419 mm) 22" (559 mm) 10 1/2" (267 mm) 6" (152 mm) C N/A
WTS2031-1 20" (508 mm) 31" (787 mm) 16 1/2" (419 mm) 28" (711 mm) 10 1/2" (267 mm) 6" (152 mm) C N/A
WTS2036-1 20" (508 mm) 36" (914 mm) 16 1/2" (419 mm) 33" (838 mm) 8" (203 mm) 10" (254 mm) C N/A
WTS2048-1 20" (508 mm) 48" (1219 mm) 16 1/2" (419 mm) 45" (1143 mm) 8" (203 mm) 10" (254 mm) C N/A
WTS2060-1 20" (508 mm) 60" (1524 mm) 16 1/2" (419 mm) 57" (1448 mm) 8" (203 mm) 10" (254 mm) C N/A
WTS2072-1 20" (508 mm) 72" (1829 mm) 16 1/2" (419 mm) 69" (1753 mm) 8" (203 mm) 10" (254 mm) C N/A
WTS2096-1 20" (508 mm) 96" (2438 mm) 16 1/2" (419 mm) 93" (2362 mm) 8" (203 mm) 10" (254 mm) C N/A
29361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartm ent wash trough. Center waste location. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. 1 1/2" (38mm) waste option available as custom request.TechnicAl dATA
Gross weight 47 kg (WTS36-1)Gross weight 59 kg (WTS48-1)Gross weight 75 kg (WTS60-1)Gross weight 91 kg (WTS72-1)Waste size DN 40 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Standard Series WTSUtility Sinks
ProjecT informATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
overAll dimenSionS Sink comPArTmenT dimenSionS
model A (fronT-BAck)
B (lefT-righT)
c (fronT-BAck)
d (lefT-righT)
e (dePTh)
f BAckSPlASh
WASTe locATion
fAUceT holeS
WTS36-1 18" (457 mm) 36" (914 mm) 14 3/4" (375 mm) 33 1/2" (851 mm) 8" (203 mm) 8" (203 mm) C N/A
WTS48-1 18" (457 mm) 48" (1219 mm) 14 3/4" (375 mm) 44 1/2" (1130 mm) 8" (203 mm) 8" (203 mm) C N/A
WTS60-1 18" (457 mm) 60" (1524 mm) 14 3/4" (375 mm) 56 1/2" (1435 mm) 8" (203 mm) 8" (203 mm) C N/A
WTS72-1 18" (457 mm) 72" (1829 mm) 14 3/4" (375 mm) 68 1/2" (1740 mm) 8" (203 mm) 8" (203 mm) C N/A
29461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Undercoated to reduce condensation and resonance. Positive hold down clamping. Hinged top cover. Embossed cross. 1 1/2" (38mm) duplex waste assembly included. Center waste location. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 16 3/4" (425 mm) Overall left to right: 16 3/4" (425 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)
RS14
technIcAl dAtA
Type of basin laboratory sink Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
RS14Sacrarium Sinks
29561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Hinged top cover. Embossed cross. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 3/16" (233 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
SS9126Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece.
technIcAl dAtA
Gross weight 5.5 kgFaucet ledge no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
SS9126Sacrarium Sinks
29661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
S9106/316P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, 3 1/2” (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2” (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9106/316P-1Type 316 Laboratory Sinks
29761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)
Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)
S9106/316P-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2” (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9106/316P-3Type 316 Laboratory Sinks
29861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 5/8" (295 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
S9407/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 2.7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S9407/316P-1Type 316 Laboratory Sinks
29961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 11 5/8" (295 mm) Overall left to right: 16 5/8" (422 mm) Overall height: 7" (178 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
S9407/316P-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 0.1 kgNet weight 2.1 kgType of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position centre Rear upstand no Overflow no
S9407/316P-3Type 316 Laboratory Sinks
30061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 7" (178 mm)
S6407/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6407/316P-1Type 316 Laboratory Sinks
30261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Center back waste location. Includes 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
S6410/316PCB-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6410/316PCB-1Type 316 Laboratory Sinks
30361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
S6808/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6808/316P-1Type 316 Laboratory Sinks
30461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
S6810/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
S6810/316P-1Type 316 Laboratory Sinks
30561562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm) Overall height: 10" (254 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
S6810/316P-3left rear waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 8.4 kgType of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position rear left Rear upstand no Overflow no
S6810/316P-3Type 316 Laboratory Sinks
30661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
LBS9407/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9407/316P-1/1, 1 hole, 1 1/2" diameter LBS9407/316P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers LBS9407/316P-1, Custom (non-returnable)
LBS9407/316P-1Type 316 Laboratory Sinks
30761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 14 5/16" (364 mm) Overall left to right: 16 5/8" (422 mm)
Bowl front to back: 9 1/2" (241 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 7" (178 mm)
LBS9407/316P-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS9407/316P-3/1, 1 hole, 1 1/2" diameter LBS9407/316P-3/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407/316P-3, Custom (non-returnable)
LBS9407/316P-3Type 316 Laboratory Sinks
30961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
LBS4607/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4607/316P-1/1, 1 hole, 1 1/2" diameter LBS4607/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS4607/316P-1, Custom (non-returnable)
LBS4607/316P-1Type 316 Laboratory Sinks
31161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
LBS4610/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4610/316P-1/1, 1 hole 1 1/2" diameter LBS4610/316P-1/2, 2 hole 1" diameter 2 3/4" centreset LBS4610/316P-1/3, 3 hole 1 1/2" diameter, 8" centreset
LBS4610/316P-1Type 316 Laboratory Sinks
31261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 13/16" (478 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
LBS4610/316PC-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.9 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS4610/316PC-3/1, 1 hole, 1 1/2" diameter LBS4610/316PC-3/2, 2 hole, 1 1/2" diameter, 2 3/4" centerset LBS4610/316PC-3/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4610/316PC-3, Custom (non-returnable)
LBS4610/316PC-3Type 316 Laboratory Sinks
31361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 16 1/8" (410 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 7" (178 mm)
LBS6407/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6407/316P-1/1, 1 hole, 1 1/2" diameter LBS6407/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6407/316P-1, Custom (non-returnable)
LBS6407/316P-1Type 316 Laboratory Sinks
31561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 5" (127 mm)
ALBS6805/316P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position rear left Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval
Model opTionS
ALBS6805/316P-1/1, 1 hole, 1 1/2" diameter ALBS6805/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6805/316P-1, Custom (non-returnable)
ALBS6805/316P-1Type 316 Laboratory Sinks
31661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 7" (178 mm)
LBS6807/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6807/316P-1/1, 1 hole, 1 1/2" diameter LBS6807/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6807/316P-1, Custom (non-returnable)
LBS6807/316P-1Type 316 Laboratory Sinks
31761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
LBS6808/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6808/316P-1/1, 1 hole, 1 1/2" diameter LBS6808/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6808/316P-1, Custom (non-returnable)
LBS6808/316P-1Type 316 Laboratory Sinks
31861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBS6810/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Single Compartment Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6810/316P-1/1, 1 hole, 1 1/2" diameter LBS6810/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6810/316P-1, Custom (non-returnable)
LBS6810/316P-1Type 316 Laboratory Sinks
31961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBS6810/316P-3left rear waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 6 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position rear left Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBS6810/316P-3/1, 1 hole, 1 1/2" diameter LBS6810/316P-3/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6810/316P-3, Custom (non-returnable)
LBS6810/316P-3Type 316 Laboratory Sinks
32061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (CNS 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
D6410/316PCB-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Double Compartment Gross weight 8.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
D6410/316PCB-1Type 316 Laboratory Sinks
32261562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners and 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 1/2" (520 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 8" (203 mm)
LBD6408/316P-18" (203mm) deep, centre back waste location, 3 1/2" (89mm) type 316 crumb cup waste
TechnicAl dATA
Type of basin Double Compartment Gross weight 8.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBD6408/316P-1/1, 1 hole, 1 1/2" diameter LBD6408/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408/316P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6408/316P-1, Custom (non-returnable)
LBD6408/316P-1Type 316 Laboratory Sinks
32361562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double compartment self rimming drop-in sink with faucet ledge. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 18/10) stain-less steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners, and waste kit. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Overall front to back: 20 13/16" (529 mm) Overall left to right: 31 1/4" (794 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 10" (254 mm)
LBD6410/316PCB-1center back waste location, includes 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
TechnicAl dATA
Type of basin Double Compartment Gross weight 9.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBD6410/316PCB-1/1, 1 hole, 1 1/2" diameter, centered over partition LBD6410/316PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter, centered over partition LBD6410/316PCB-1/X, Custom (non-returnable)
LBD6410/316PCB-1Type 316 Laboratory Sinks
32461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 18 1/8" (460 mm) Overall height: 8" (203 mm)
Bowl front to back: 14" (355 mm) Bowl left to right: 16" (406 mm) Bowl depth: 8" (203 mm)
UCS4608/316P-1
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.8 kgType of mounting undermount Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position centre Rear upstand no Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS4608/316P-1Type 316 Laboratory Sinks
32561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
Overall front to back: 16 1/8" (410 mm) Overall left to right: 18 1/8" (460 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
UCS4610/316P-1
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.8 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS4610/316P-1Type 316 Laboratory Sinks
32661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
Overall front to back: 17 3/4" (451 mm) Overall left to right: 19 3/4" (502 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 8" (203 mm)
UCS6808/316P-1
TechnicAl dATA
Type of basin Single Compartment Gross weight 4.8 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS6808/316P-1Type 316 Laboratory Sinks
32761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.
Overall front to back: 18 1/8" (460 mm) Overall left to right: 20 1/8" (511 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
UCS6810/316P-1
TechnicAl dATA
Type of basin Single Compartment Gross weight 6.4 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
UCS6810/316P-1Type 316 Laboratory Sinks
32861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment scullery sink. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless Steel tubular legs with adjustable feet. Type 316 (EN1.4401 17/12/2) waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.
BAckSplASh9" (230 mm)
WASTe Size-1 = 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece. -5 = 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece with standpipe and guard
FAUceT hole opTionS (STAndArd)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.
Floor To Work SUrFAce35" (890 mm)
Classic Series - 16 gaugeType 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single Compartment - without drainboard
overAll diMenSionS Sink coMpArTMenT diMenSionS
Model A (FronT-BAck)
B (leFT-righT)
c (FronT-BAck)
d (leFT-righT)
e (depTh)
F BAckSplASh
WASTe locATion
FAUceT holeS
SL2424/316-1 27 3/16" (691 mm) 27 3/16" (691 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2
SL2424/316-5 27 3/16" (691 mm) 27 3/16" (691 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2
SL2448/316-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2
SL2448/316-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR 2
Drawing shown with a "-1" waste
32961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink without faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.TechnicAl dATA
Type of basin Single Compartment Gross weight 16.4 kg (ART36/316-1)Gross weight 17.7 kg (ART48/316-1)Gross weight 19.1 kg (ART60/316-1)Type of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Art Room - 18 gaugeType 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Type 316 - 18 gauge
overAll diMenSionS Sink coMpArTMenT diMenSionS
Model A (FronT-BAck)
B (leFT-righT)
c (FronT-BAck)
d (leFT-righT)
e (depTh)
F BAckSplASh
WASTe locATion
FAUceT holeS
ART36/316-1 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) N/A C N/A
ART48/316-1 19 1/8" (486 mm) 50 1/8" (1273 mm) 17" (432 mm) 48" (1219 mm) 8" (203 mm) N/A C N/A
ART60/316-1 19 1/8" (486 mm) 62 1/8" (1578 mm) 17" (432 mm) 60" (1524 mm) 8" (203 mm) N/A C N/A
33061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink without faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.TechnicAl dATA
Type of basin Single Compartment Gross weight 16.4 kg (ART36/316-3C)Gross weight 17.7 kg (ART48/316-3C)Gross weight 19.1 kg (ART60/316-3C)Type of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rectangle Waste hole position centre Rear upstand no Overflow no
Art Room - 18 gaugeType 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Type 316 - 18 gauge
overAll diMenSionS Sink coMpArTMenT diMenSionS
Model A (FronT-BAck)
B (leFT-righT)
c (FronT-BAck)
d (leFT-righT)
e (depTh)
F BAckSplASh
WASTe locATion
FAUceT holeS
ART36/316-3C 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) N/A C N/A
ART48/316-3C 19 1/8" (486 mm) 50 1/8" (1273 mm) 17" (432 mm) 48" (1219 mm) 8" (203 mm) N/A C N/A
ART60/316-3C 19 1/8" (486 mm) 62 1/8" (1578 mm) 17" (432 mm) 60" (1524 mm) 8" (203 mm) N/A C N/A
33161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Note: Please allow 4 weeks for delivery.
Overall front to back: 20 9/16" (522 mm) Overall left to right: 40" (1016 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBSDBL6810/316P-1Drain board is located to the left of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 9.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 3 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBSDBL6810/316-1/1, 1 hole, 1 1/2" diameter LBSDBL6810/316-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6810/316-1, Custom (non-returnable)
LBSDBL6810/316P-1Type 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
33261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Note: Please allow 4 weeks for delivery.
Overall front to back: 20 5/8" (524 mm) Overall left to right: 40" (1016 mm)
Bowl front to back: 16" (406 mm) Bowl left to right: 18" (457 mm) Bowl depth: 10" (254 mm)
LBSDBR6810/316P-1Drain board is located to the right of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Type of basin Single Compartment Gross weight 9.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 3 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
LBSDBR6810/316-1/1, 1 hole, 1 1/2" diameter LBSDBR6810/316-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6810/316-1, Custom (non-returnable)
LBSDBR6810/316P-1Type 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
33361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single bowl commercial laboratory sink. 20 gauge (0.9mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are sand-blast finished. Positive hold down clamping. 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly is integral (tailpiece optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location These sinks do not include tailpiece. A type 316 tailpiece is available by ordering 315-9/316.
Overall front to back: 4 1/2" (114 mm) Overall left to right: 7 1/2" (190 mm) Overall height: 4 1/2" (114 mm)
Bowl front to back: 3" (76 mm) Bowl left to right: 6" (152 mm) Bowl depth: 3 11/16" (94 mm)
OC6/316
TechnicAl dATA
Type of basin laboratory sink Gross weight 15.5 kgNet weight 11.5 kgType of mounting counter top mounting Waste size DN 40 Faucet ledge no Bowl shape oval Waste hole position centre Overflow no
OC6/316Type 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
33561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Single bowl commercial laboratory sink. 20 gauge (0.9mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are sand-blast finished. Positive hold down clamping. 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly is integral (tailpiece optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location. These sinks do not include tailpiece. A type 316 tailpiece is available by ordering 315-9/316.
Overall front to back: 7 5/8" (194 mm) Overall left to right: 7 5/8" (194 mm)
Bowl front to back: 6" (152 mm) Bowl left to right: 6" (152 mm) Bowl depth: 4 1/2" (114 mm)
RC6/316
TechnicAl dATA
Type of basin laboratory sink Gross weight 0.9 kgType of waste kit threaded tailpiece Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
RC6/316Type 316 Laboratory Sinks
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
33661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 17" (432 mm) Overall left to right: 16 1/2" (419 mm) Overall height: 9 3/4" (248 mm)
Bowl front to back: 12" (305 mm) Bowl left to right: 14" (356 mm) Bowl depth: 6" (152 mm)
WHB1617/316-3no faucet hole / custom drilling
TechnicAl dATA
Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
WHB1617/316-3/1, 1 hole, 1 1/2" diameter WHB1617/316-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617/316-3, Custom (non-returnable)
WHB1617/316-3Type 316 Laboratory Sinks
33761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB1617/316-3Type 316 Laboratory Sinks
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Hanger Bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
33861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
projecT inForMATion
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 10 3/4" (273 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 7" (178 mm)
WHB1819/316-3no faucet hole / custom drilling, 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece
TechnicAl dATA
Gross weight 6 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
WHB1819/316-3/1, 1 hole, 1 1/2" diameter WHB1819/316-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1819/316-3, Custom (non-returnable)
WHB1819/316-3Type 316 Laboratory Sinks
33961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHB1819/316-3Type 316 Laboratory Sinks
ROUGH-IN DETAILS
Back side of unit is open
Clips to be positioned as required
Hanger Bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
34261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformatIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.
Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 14 1/4" (362 mm)
Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 10" (254 mm)
WHBS181910/316-3
TechnicAl dATA
Gross weight 8 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval
Model opTionS
WHBS181910/316-3/1, 1 hole, 1 1/2" diameter WHBS181910/316-3/3, 3 hole, 1 1/2" diameter, 4" center set WHBS181910/316-3/X, custom / non-returnable, faucet holes to be specified at time of order
WHBS181910/316-3Type 316 Laboratory Sinks
34361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
WHBS181910-316-3Type 316 Laboratory Sinks
Back side of unit is open
Clips to be positioned as required
Hanger bracket is 14 gauge galvanized steel
CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER
34461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Single urinal for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, oval bowl, hidden horizontal outlet towards wall, mounting and fixing conform to EN 80, hidden screws, included trap DN 50, included mounting bracket and domed waste.
Overall front to back: 13 7/16" (342 mm) Overall left to right: 12 5/16" (313 mm) Overall height: 28 7/8" (733 mm)
CMPX538with stainless steel spreader 1/2" CE Certified
technIcAl dAtA
Type of urinal single urinal Gross weight 8.9 kgNet weight 7.3 kgType of mounting wall mounting Type of waste kit domed waste Inlet size DN 50 Outlet size DN 50 Siphon included yes Type of flushing water Water inlet concealed Water outlet concealed
CMPX538Urinals and Toilets
34561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT rear spud. Installation: These fixtures are designed to be installed onto a 3 bolt blow out jet wall carrier.
Overall front to back: 24 1/8" (613 mm) Overall left to right: 14" (355 mm) Overall height: 15" (381 mm)
HDWC2414-FM-Rfront mounted
technIcAl dAtA
Type of mounting front mounted Type of WC wall hung Inlet size G 1 1/4 B Minimum flushing capacity 6.000 l
HDWC2414-FM-RUrinals and Toilets
34661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data.
Please visit www.franke-commercial.com for the latest specifications.
HDWC2414-FM-RUrinals and Toilets
ROUGH-IN DETAILS
34761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT top spud. A standard elongated toilet seat (supplied by others) can be used with this product. Fixture can be installed to a standard 3 bolt wall carrier for blowout jet toilets.
Overall front to back: 25 5/8" (651 mm) Overall left to right: 14" (355 mm) Overall height: 15" (381 mm)
HDWC2514-FM-Tfront mounted
technIcAl dAtA
Type of mounting front mounted Type of WC wall hung Inlet size G 1 1/4 B Minimum flushing capacity 6.000 l
HDWC2514-FM-TUrinals and Toilets
34861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data.
Please visit www.franke-commercial.com for the latest specifications.
HDWC2514-FM-TUrinals and Toilets
ROUGH-IN DETAILS
34961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Deluxe shower curtain. Opaque white vinyl, matte finish with nickel-plated grommets
CV-00Overall size left to right: 70" (1780 mm) Overall height: 72" (1830 mm)
CV-01Overall size left to right: 48" (1219 mm) Overall height: 70" (1780 mm)
CV-02Overall size left to right: 70" (1780 mm) Overall height: 70" (1780 mm)
CV-00, CV-01, CV-02Washroom Accessories
LSection only of curtain shown
35061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Curtain rod, stainless steel tubing, 1 1/4" (32mm) diameter. Exposed surfaces finished to a #4 satin finish. Polished chrome flanges and mount-ing hardware included.
CR-3636" (914mm) length
CR-4848" (1220mm) length
CR-6060" (1525mm) length
CR-7272" (1830mm) length
CR-36, CR-48, CR-60, CR-72Washroom Accessories
35161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Curtain Hook (polished chrome finish) (12 pcs)
CH-01stainless steel wire, with snap ring locking device and rollers with polished chrome finish. Overall size left to right: 1 1/2" (38 mm) Overall height: 2 7/8" (73 mm)
CH-02stainless steel wire, with snap ring locking device and polished chrome finish. Overall size left to right: 1 1/2" (38 mm) Overall height: 2 5/8" (67 mm)
Product picture: CH-01 Product picture: CH-02
CH-01, CH-02Washroom Accessories
35261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Corner guard made from 18 gauge (1.2mm), type 304 18/10 stainless steel. Pre-drilled for fasteners (not included), no return bend. Satin finished.
Overall front to back: 3" (76 mm) Overall left to right: 3" (76 mm) Overall height: 48 1/16" (1220 mm)
ACG-48Corner Guard
ACG-48Washroom Accessories
35361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Hook for wall mounting, stainless steel, surface satin finished, 17 mm (.669") pipe diameter, drilled hole on bottom for fixation, incl. stainless steel screws and dowels.
Overall front to back: 2 3/8" (60 mm) Overall left to right: 11/16" (18 mm) Overall height: 1 1/2" (38 mm)
STRX692
Technical daTa
Gross weight 0.1 kgNet weight 0.1 kgType of mounting wall mounting Number of hooks 1
STRX692Washroom Accessories
35461562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double hook for wall mounting, stainless steel, surface satin finished, 18 mm (.7") pipe diameter, drilled hole on bottom for fixation, incl. stainless steel screws and dowels.
Overall front to back: 2 3/8" (60 mm) Overall left to right: 2 11/16" (69 mm) Overall height: 11/16" (18 mm)
STRX694
Technical daTa
Gross weight 0.1 kgNet weight 0.1 kgType of mounting wall mounting Number of hooks 2
STRX694Washroom Accessories
35561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
1 1/4" (32mm) diameter. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.
QC-1W-18PStraight grab bar, 18" (457mm) length
Technical daTa
Type of grab rail straight bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-1W-24PStraight grab bar, 24" (610mm) length
Technical daTa
Type of grab rail straight bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-1W-30PStraight grab bar, 30" (762mm) length
Technical daTa
Type of grab rail straight bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-1W-36PStraight grab bar, 36" (914mm) length
Technical daTa
Type of grab rail straight bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-1W SeriesWashroom Accessories
35661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Angled Grab Bar, 30" x 30" (760mm x 760mm) with centre support. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.
Overall front to back: 30" (762 mm) Overall left to right: 30" (762 mm)
QC-1W-3030P1 1/4" (32mm) diameter
Technical daTa
Type of grab rail corner bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-1W-3030PWashroom Accessories
35761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Angled grab bar, with centre support. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.
QC-2W-2436PTwo wall angled grab bar, 24" x 36" (610mm x 915mm) with centre support
Technical daTa
Type of grab rail corner bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-2W-3030PTwo wall angled grab bar, 30" x 30" (760mm x 760mm) with centre support.
Technical daTa
Type of grab rail corner bar Certificates and approvals pre-consumer recycled 31%, post-
consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)
QC-2W-2436P, QC-2W-3030PWashroom Accessories
35861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Back rest. Stainless steel bar uses #4 gloss with flanges and covers, with antique white solid core plastic laminate panel back. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.
Overall front to back: 8 5/8" (219 mm)
CM-16104Overall size of left to right is measured centre to centre.
CM-16104Washroom Accessories
36061562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Paper towel dispenser for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge, folded front cover, cylinder lock with Franke standard key, inspection windows on sides, loading capacity 500 - 800 pcs. of paper depending on convolution, incl. stainless steel screws and dowels.
Overall front to back: 4 7/16" (112 mm) Overall left to right: 10 13/16" (275 mm) Overall height: 14" (355 mm)
RODX600
Technical daTa
Gross weight 2.6 kgNet weight 2.2 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 towelsType of consumable paper towel
RODX600Washroom Accessories
36161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Touch free paper towel dispenser for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded cover with cylinder lock and standard Franke key, infrared sensor activity for non-touch operation, integrated tear-off edge, needs 4 pcs. standard D 1.5 V batteries, maintenance free mechanic and easy paper roll change mechanism, for rolls with max. width 205 mm (8.07") and max. diameter 200 mm (7.87"), paper length adjustable to 200, 250 and 300 mm (7.87, 9.84" and 11.81"), incl. stainless steel screws and dowels.
Overall front to back: 8 7/8" (226 mm) Overall left to right: 11 7/16" (290 mm) Overall height: 15 3/8" (390 mm)
RODX630
Technical daTa
Gross weight 6.2 kgNet weight 5.8 kgType of operation sensor operation Type of mounting wall mounting Lock key-lock Filling quantity 1.00 rollsType of consumable paper roll Maximum depth/diameter of consumable 8 11/16" (220 mm)Maximum width of consumable 8 1/16" (205 mm)Type of batteries D Mono battery 1.5 V Number of batteries 4
RODX630Washroom Accessories
36261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Paper towel dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge, folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, incl. stainless steel screws and dowels.
Overall front to back: 4 7/16" (112 mm) Overall left to right: 12 3/4" (324 mm) Overall height: 20 3/16" (513 mm)
RODX600E
Technical daTa
Gross weight 2.4 kgNet weight 2.4 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 800.00 towelsType of consumable paper towel
RODX600EWashroom Accessories
36361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Paper towel dispenser for hidden mounting behind wall and mirror, stainless steel, surface satin finished, material thickness 22 gauge for 600 - 800 paper towels, depending on convolution, filling from bottom, incl. stainless steel screws and dowels.
Overall front to back: 4 7/16" (113 mm) Overall left to right: 13 7/16" (342 mm) Overall height: 18 1/4" (464 mm)
RODX600ME
Technical daTa
Gross weight 4 kgNet weight 4 kgType of operation manual operation Type of mounting various types of mounting Lock no lock Filling quantity 800.00 towelsType of consumable paper towel Maximum depth/diameter of consumable 3 3/8" (85 mm)Maximum width of consumable 10 5/8" (270 mm)
RODX600MEWashroom Accessories
61562 | SPECIFICATIONS | REV. 14_MAY_2015 365www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Chrome soap dispenser manufactured from chromium plated brass. In-corporates a replaceable 1 litre polyethylene container for use with liquid soap
Overall front to back: 5 1/2" (140 mm) Overall left to right: 1 3/4" (44 mm) Overall height: 15 7/16" (392 mm)
SD80Vstandard
Technical daTa
Type of soap container integrated refillable tank Type of operation manual operation Filling quantity 1.00 literType of consumable liquid soap
SD80V-EXTwith extension for "Murro" basin (or equivalent)
Technical daTa
Type of soap container integrated refillable tank Type of operation manual operation Filling quantity 1.00 literType of consumable liquid soap
ESD80BOTTLE1Replacement refillable tank Overall height: 12 3/16" (310 mm) Overall diameter: 3 1/8" (79 mm)
Technical daTa
Filling quantity 1.00 literType of consumable liquid soap Material type polyethylene
SD80V, SD80V-EXTWashroom Accessories
36861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap tank, lever to pull, incl. stainless steel screws and dowels.
Overall front to back: 5 5/8" (143 mm) Overall left to right: 4 9/16" (116 mm) Overall height: 12 5/8" (321 mm)
RODX618
Technical daTa
Type of soap container integrated refillable tank Gross weight 2 kgNet weight 2 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap
RODX618Washroom Accessories
36961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Touch free soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, infrared sensor activity for non-touch operation, LED-light shows battery status, needs 6 pcs. 1.5 V (=9 V) Alkaline AA batteries, suitable for liquid soaps and lotions, 800 ml soap tank, depending on soap between 0.6 and 1.1 ml is dispensed, incl. stainless steel screws and dowels.
Overall front to back: 4 3/16" (107 mm) Overall left to right: 4 3/4" (120 mm) Overall height: 11 5/8" (296 mm)
RODX625
Technical daTa
Type of soap container integrated refillable tank Gross weight 1.7 kgNet weight 1.5 kgType of operation sensor operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap Type of batteries AA Mignon battery 1.5 V Number of batteries 6
RODX625Washroom Accessories
37161562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Soap dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap tank, lever to pull, incl. stainless steel screws and dowels.
Overall front to back: 5 5/8" (143 mm) Overall left to right: 6 1/16" (154 mm) Overall height: 18 1/4" (463 mm)
RODX618E
Technical daTa
Type of soap container integrated refillable tank Gross weight 2.5 kgNet weight 2.5 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap
RODX618EWashroom Accessories
37261562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 liter soap tank, push button on front, incl. stainless steel screws and dowels.
Overall front to back: 5 3/16" (132 mm) Overall left to right: 7 7/8" (200 mm) Overall height: 5 1/2" (140 mm)
RODX619
Technical daTa
Type of soap container integrated refillable tank Gross weight 1.3 kgNet weight 1 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 1.00 literType of consumable liquid soap
RODX619Washroom Accessories
37361562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Soap dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 liter soap tank, push button on front, incl. stainless steel screws and dowels.
Overall front to back: 5 3/16" (132 mm) Overall left to right: 9 1/2" (241 mm) Overall height: 9 9/16" (243 mm)
RODX619E
Technical daTa
Type of soap container integrated refillable tank Gross weight 1.1 kgNet weight 1.1 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 1.00 literType of consumable liquid soap
RODX619EWashroom Accessories
37761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double toilet roll holder with spindle system for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø 120 mm (4.72"), second roll will be released after consumption of first roll, with spindles, reserve roll not visible, incl. stainless steel screws and dowels.
Overall front to back: 5 7/16" (138 mm) Overall left to right: 5 11/16" (144 mm) Overall height: 11 7/8" (301 mm)
RODX672
Technical daTa
Gross weight 2.6 kgNet weight 2.6 kgType of mounting wall mounting Lock key-lock Filling quantity 2.00 rollsMaximum depth/diameter of consumable 4 1/2" (115 mm)Maximum width of consumable 4 1/2" (115 mm)Spindle yes
RODX672Washroom Accessories
37861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Double toilet roll holder with spindle system for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø 120 mm (4.72"), second roll will be released after consumption of first roll, reserve roll not visible, incl. stainless steel screws and dowels.
Overall front to back: 5 7/16" (138 mm) Overall left to right: 7 1/4" (184 mm) Overall height: 13 7/16" (341 mm)
RODX672E
Technical daTa
Gross weight 2.7 kgNet weight 2.7 kgType of mounting recessed mounting Lock key-lock Filling quantity 2.00 rollsMaximum depth/diameter of consumable 4 1/2" (115 mm)Maximum width of consumable 4 1/2" (115 mm)Spindle yes
RODX672EWashroom Accessories
37961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Jumbo roll holder for wall mounting, stainless steel, surface satin finished, material thickness 0.9 mm, closed round casing with inspection window, paper withdrawal over two tear-off edges, locked with hexagonal allen screw, for 1 roll with max. Ø 350 mm, incl. stainless steel screws, dowels and hexagonal allen key.
Overall front to back: 4 1/4" (108 mm) Overall left to right: 14 1/2" (369 mm) Overall height: 14 1/2" (369 mm)
CHRX670
Technical daTa
Gross weight 2.4 kgNet weight 1.9 kgType of mounting wall mounting Lock screw-lock Filling quantity 1.00 rollsMaximum depth/diameter of consumable 13 3/4" (350 mm)Maximum width of consumable 3 15/16" (100 mm)Spindle yes
CHRX670Washroom Accessories
38561562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Sanitary towel and disposal bin for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, approx. 3.7 liter capacity, removable plastic container inside, incl. stainless steel screws and dowels.
Overall front to back: 6 1/2" (165 mm) Overall left to right: 7 7/8" (200 mm) Overall height: 11 5/8" (295 mm)
RODX611
Technical daTa
Gross weight 2.6 kgNet weight 2.2 kgType of mounting wall mounting Lock no lock Filling volume 3.700 literLid yes Bag clamp no
RODX611Washroom Accessories
38661562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Paper towel dispenser - waste bin combination for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 liter capacity, incl. stainless steel screws and dowels.
Overall front to back: 6 5/8" (169 mm) Overall left to right: 16 1/16" (408 mm) Overall height: 45 1/16" (1145 mm)
RODX602E
Technical daTa
Gross weight 13.2 kgNet weight 12.5 kgType of mounting recessed mounting Combination part 1 paper towel dispenser Type of consumable 1 paper towel Filling quantity 1 800 piecesLock 1 key-lock Combination part 2 waste bin Filling quantity 2 23 literLock 2 key-lock
RODX602EWashroom Accessories
38761562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Waste bin for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge rounded edges, mounting either with mounting bracket or directly onto the wall, incl. stainless steel screws and dowels.
Overall front to back: 6 5/8" (168 mm) Overall left to right: 14" (355 mm) Overall height: 18 1/8" (460 mm)
RODX605capacity: approx. 23 liter
Technical daTa
Gross weight 1 kgNet weight 1 kgType of mounting wall mounting Lock no lock Filling volume 23.000 literLid no Bag clamp no
RODX605Washroom Accessories
38861562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Waste bin for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge rounded edges, cylinder lock with Franke standard key, mounting with in-wall frame, incl. stainless steel screws and dowels.
Overall front to back: 6 5/8" (169 mm) Overall left to right: 16 1/16" (408 mm) Overall height: 27 3/16" (690 mm)
RODX605Ecapacity: approx. 23 liter
Technical daTa
Gross weight 7.5 kgNet weight 7.5 kgType of mounting recessed mounting Lock key-lock Filling volume 23.000 literLid no Bag clamp no
RODX605EWashroom Accessories
38961562 | SPECIFICATIONS | 2014 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Paper towel dispenser, waste bin combination for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 liter capacity, incl. stainless steel screws and dowels.
Overall front to back: 6 3/4" (171 mm) Overall left to right: 16 3/16" (411 mm) Overall height: 45 3/16" (1148 mm)
RODX602
Technical daTa
Gross weight 10 kgNet weight 10 kgType of mounting wall mounting Combination part 1 paper towel dispenser Type of consumable 1 paper towel Filling quantity 1 800 piecesLock 1 key-lock Combination part 2 waste bin Filling quantity 2 23 literLock 2 key-lock
RODX602Washroom Accessories
61562 | SPECIFICATIONS | REV. 01_JAN_2015 390www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
One piece, 3/8" (9.53mm) x 1/2" (12.7mm) x 3/8" (9.53mm), type 430 BA stainless steel channel frame. Tightly mitered corners with unique concealed screw fixings to ensure easy field mirror replacement. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Three way keyhole slots and theft resistant clips assure a secure and vandal resistant mounting. Mirrors can be installed horiztonally or vertically.
Overall front to back (depth): 1/2" (13 mm)
F850-1824
Technical daTa
Gross weight 5.4 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 24" (609 mm)
F850-1830
Technical daTa
Gross weight 6.8 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 30" (762mm)
F850-1836
Technical daTa
Gross weight 8.2 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 36" (914 mm)
F850-2430
Technical daTa
Gross weight 9.1 kgType of mounting wall mountingOverall left to right: 24" (609 mm)Overall height: 30" (762 mm)
F850-2436
Technical daTa
Gross weight 10.9 kgType of mounting wall mountingOverall left to right: 24" (609 mm)Overall height: 36" (914 mm)
F850++Washroom Accessories
61562 | SPECIFICATIONS | REV. 01_JAN_2015 391www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Rigidly formed, 3/4" (19mm) x 5/8" (16mm), 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered corners are heliarc welded, ground, and polished smooth. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Wall hanger and mechanical fixings are concealed to assure a secure and vandal resistant wall mounting.
Overall front to back: 5/8" (16 mm)
F3200-1824
Technical daTa
Gross weight 6.8 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 24" (609 mm)
F3200-1830
Technical daTa
Gross weight 8.5 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 30" (762 mm)
F3200-1836
Technical daTa
Gross weight 10.2 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 36" (914 mm)
F3200-2430
Technical daTa
Gross weight 11.3 kgType of mounting wall mountingOverall left to right: 24" (609 mm)Overall height: 30" (762 mm)
F3200-2436
Technical daTa
Gross weight 13.6 kgType of mounting wall mountingOverall left to right: 24" (609 mm)Overall height: 36" (914 mm)
F3200++Washroom Accessories
61562 | SPECIFICATIONS | REV. 01_JAN_2015 392www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
Rigidly formed, 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered corners are heliarc welded, ground, and polished smooth. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Wall hanger and mechanical fixings are concealed to assure a secure and vandal resistant wall mounting.
Overall front to back: 4" (102 mm)
F3200FT-1630
Technical daTa
Net weight 7.6 kgType of mounting wall mountingOverall left to right: 16" (406 mm) Overall height: 30" (762 mm)
F3200FT-1830
Technical daTa
Net weight 8.5 kgType of mounting wall mountingOverall left to right: 18" (457 mm) Overall height: 30" (762 mm)
F3200FT-1836
Technical daTa
Net weight 10.2 kgType of mounting wall mountingOverall left to right: 18" (457 mm) Overall height: 36" (914 mm)
F3200FT-2436
Technical daTa
Net weight 13.6 kgType of mounting wall mountingOverall left to right: 24" (609 mm) Overall height: 36" (914 mm)
F3200FT++Washroom Accessories
392-A61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm
EXOS600B
Technical daTa
Net weight 5.10kg/11.24 lbs.Type of mounting wall mounting
EXOS600BWashroom Accessories
392-B61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm
EXOS600W
Technical daTa
Net weight 5.06 kg/11.15 lbs.Type of mounting wall mounting
EXOS600WWashroom Accessories
392-C61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm
EXOS600X
Technical daTa
Net weight 4.36 kg/9.61 lbs.Type of mounting wall mounting
EXOS600XWashroom Accessories
392-D61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS waste bin for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 572 x 250 mm
EXOS605B
Technical daTa
Net weight 11.67 kg/25.73 lbs.Type of mounting wall mounting
EXOS605BWashroom Accessories
392-E61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS Waste bin for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 573 x 250 mm
EXOS605W
Technical daTa
Net weight 11.80 kg/26.01 lbs.Type of mounting wall mounting
EXOS605WWashroom Accessories
392-F61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS waste bin for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 573 x 250 mm
EXOS605X
Technical daTa
Net weight 10.31 kg/22.73 lbs.Type of mounting wall mounting
EXOS605XWashroom Accessories
392-G61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS616B
Technical daTa
Net weight 3.54 kg/7.80 lbs.Type of mounting wall mounting
EXOS616BWashroom Accessories
392-H61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap.
Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS616W
Technical daTa
Net weight 3.52 kg/7.76 lbs.Type of mounting wall mounting
EXOS616WWashroom Accessories
392-I61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap.
Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS616X
Technical daTa
Net weight 3.28 kg/7.23 lbs.Type of mounting wall mounting
EXOS616XWashroom Accessories
392-J61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS618B
Technical daTa
Net weight 2.77 kg/6.11 lbs.Type of mounting wall mounting
EXOS618BWashroom Accessories
392-K61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS618W
Technical daTa
Net weight 2.78 kg/6.13 lbs.Type of mounting wall mounting
EXOS618WWashroom Accessories
392-L61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS618X
Technical daTa
Net weight 2.52 kg/5.55lbs.Type of mounting wall mounting
EXOS618XWashroom Accessories
392-M61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS625B
Technical daTa
Net weight 2.78 kg/6.13 bs.Type of mounting wall mounting
EXOS625BWashroom Accessories
392-N61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS625W
Technical daTa
Net weight 2.79 kg/6.13 bs.Type of mounting wall mounting
EXOS625WWashroom Accessories
392-O61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm
EXOS625X
Technical daTa
Net weight 2.54 kg/5.60 bs.Type of mounting wall mounting
EXOS625XWashroom Accessories
392-P61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm
EXOS637B
Technical daTa
Net weight 10.36 kg/22.84 bs.Type of mounting wall mounting
EXOS637BWashroom Accessories
392-Q61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm
EXOS637W
Technical daTa
Net weight 10.37 kg/22.88 bs.Type of mounting wall mounting
EXOS637WWashroom Accessories
392-R61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Project InformAtIon
Project Name
Item Reference
Location
Quote #
Faucet Model #
Drillings Required
Notes
EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm
EXOS637X
Technical daTa
Net weight 9.64 kg/21.25 bs.Type of mounting wall mounting
EXOS637XWashroom Accessories
39361562 | SPECIFICATIONS | REV.2016 393
USA: 1-855-526-0503 | commercial-info.us@franke.com
Model Page Model Page
1100 . .................................................................................................... 7100-1/302 . ........................................................................................ 7100-NR . .............................................................................................. 7125GOWK . ......................................................................................... 7125GWK . ............................................................................................ 7125GWK-MOD . ...................................................................................... 71047 . .................................................................................................. 71120/316 . ......................................................................................... 71130 . .................................................................................................. 71130/60 . ........................................................................................... 71140 ♦ . .............................................................................................. 71140/60 ♦ ......................................................................................... 71200/316G . ...................................................................................... 71300G . ............................................................................................... 7
2200/316 . ........................................................................................... 7200/316-NR . ..................................................................................... 7
3310-1 . ................................................................................................. 7312-1 . ................................................................................................. 7315-7 . ................................................................................................. 7315-8 . ................................................................................................. 7315-9 . ................................................................................................. 7315-9/316 . ........................................................................................ 73000T3370A .................................................................................. 2413001T3370A .................................................................................. 241
AACG-48 . .......................................................................................... 352ALBD1305P-1 . ............................................................................... 109ALBD1306P-1 . ............................................................................... 110ALBD4405P-1 . ............................................................................... 112ALBD4406P-1 . ............................................................................... 113ALBD6405-1 . ................................................................................. 104ALBD6405P-1 . ............................................................................... 116ALBD6406P-1 . ............................................................................... 117ALBD7505P-1 . ............................................................................... 120ALBD7506P-1 . ............................................................................... 121ALBDC182605P-1 . ........................................................................ 102ALBLRS7005P-1 . ........................................................................... 146ALBLRS7006P-1 . ........................................................................... 147ALBLS4605P-1 . ............................................................................. 132ALBLS4606P-1 . ............................................................................. 133ALBLS6406P-1 . ............................................................................. 135ALBLS7005P-1 . ............................................................................. 137ALBLS7006P-1 . ............................................................................. 138ALBRS4605P-1 . ............................................................................. 140ALBRS4606P-1 . ............................................................................. 141ALBRS7005P-1 . ............................................................................. 143ALBRS7006P-1 . ............................................................................. 144ALBS1305P-1 . ................................................................................. 49ALBS1306P-1 . ................................................................................. 50ALBS2705P-1 . ................................................................................. 52ALBS2706P-1 . ................................................................................. 53ALBS4005P-1 . ................................................................................. 63ALBS4006P-1 . ................................................................................. 64ALBS4405P-1 . ................................................................................. 55ALBS4406P-1 . ................................................................................. 56ALBS4605P-1 . ................................................................................. 59ALBS4606P-1 . ................................................................................. 60ALBS6105P-1 . ................................................................................. 76
ALBS6106P-1 . ................................................................................. 77ALBS6405-1 . .................................................................................... 39ALBS6405P-1 . ................................................................................. 68ALBS6406P-1 . ................................................................................. 69ALBS6805-1 . .................................................................................... 40ALBS6805/316P-1 . ....................................................................... 315ALBS6805P-1 . ................................................................................. 72ALBS6806P-1 . ................................................................................. 73ALBS7005P-1 . ................................................................................. 80ALBS7006P-1 . ................................................................................. 81ALBS7305P-1 . ................................................................................. 88ALBS7306P-1 . ................................................................................. 89ALBS7505P-1 . ................................................................................. 84ALBS7506P-1 . ................................................................................. 85ALBS7805P-1 . ................................................................................. 94ALBS7806P-1 . ................................................................................. 95ALBS9405P-1 . ................................................................................. 46ALBS9406P-1 . ................................................................................. 47ALHS4605P-1 . ............................................................................... 149ALHS4606P-1 . ............................................................................... 150ALHS6405P-1 . ............................................................................... 152ALHS6406P-1 . ............................................................................... 153ALHS7305P-1 . ............................................................................... 155ALHS7306P-1 . ............................................................................... 156ALHS8605P-1 . ............................................................................... 158ALHS8606P-1 . ............................................................................... 159ALRS4605P-1 . ............................................................................... 161ALRS4606P-1 . ............................................................................... 162ANMW0010 . ...............................................................................279-AANMW0011 . ...............................................................................279-BART36-1 . ........................................................................................ 164ART36-3C . ...................................................................................... 165ART36/316-1 . ............................................................................... 329ART36/316-3C . ............................................................................. 330ART48-1 . ........................................................................................ 164ART48-3C . ...................................................................................... 165ART48/316-1 . ............................................................................... 329ART48/316-3C . ............................................................................. 330ART60-1 . ........................................................................................ 164ART60-3C . ...................................................................................... 165ART60/316-1 . ............................................................................... 329ART60/316-3C . ............................................................................. 330AS6105P-1 . ...................................................................................... 26AWHB1414P-00 . ........................................................................... 243
CC621T . ............................................................................................ 242CH-01 . ............................................................................................ 351CH-02 . ............................................................................................ 351CHRX670 . ...................................................................................... 379CL-DB . ............................................................................................ 202CM-16104 . ..................................................................................... 358CMPX538 . ...................................................................................... 344CR-36 . ............................................................................................ 350CR-48 . ............................................................................................ 350CR-60 . ............................................................................................ 350CR-72 . ............................................................................................ 350CV-00 . ............................................................................................ 349CV-01 . ............................................................................................ 349CV-02 . ............................................................................................ 349
DD0814P-1 . ...................................................................................... 103D1906-1 . .......................................................................................... 98D6408-1 . .......................................................................................... 99
39461562 | SPECIFICATIONS | REV.2016 394
USA: 1-855-526-0503 | commercial-info.us@franke.com
Model Page Model Page
D6410/316PCB-1 . ........................................................................ 320D6410PCB-1 . ................................................................................. 101D8610-1 . ........................................................................................ 100DL2448-1 . ...................................................................................... 200DL2448-5 . ...................................................................................... 200
EESD80BOTTLE1 . ............................................................................ 365EXOS600B ...................................................................................392-AEXOS600W . ................................................................................392-BEXOS600X . ..................................................................................392-CEXOS605B ...................................................................................392-DEXOS605W . ................................................................................ 392-EEXOS605X . .................................................................................. 392-FEXOS616B ...................................................................................392-GEXOS616W . ................................................................................392-HEXOS616X . ................................................................................... 392-IEXOS618B .................................................................................... 392-JEXOS618W . ................................................................................392-KEXOS618X . .................................................................................. 392-LEXOS625B .................................................................................. 392-MEXOS625W . ................................................................................392-NEXOS625X . ..................................................................................392-OEXOS637B ................................................................................... 392-PEXOS637W . ................................................................................392-QEXOS637X . ..................................................................................392-R
FF850-1824 . .................................................................................... 390F850-1830 . .................................................................................... 390F850-1836 . .................................................................................... 390F850-2430 . .................................................................................... 390F850-2436 . .................................................................................... 390F3200-1824 . .................................................................................. 391F3200-1830 . .................................................................................. 391F3200-1836 . .................................................................................. 391F3200-2430 . .................................................................................. 391F3200-2436 . .................................................................................. 391F3200FT-1630 . .............................................................................. 392F3200FT-1830 . .............................................................................. 392F3200FT-1836 . .............................................................................. 392F3200FT-2436 . .............................................................................. 392FSS2210/316-1 . ........................................................................... 286FSS222210/316-1 . ....................................................................... 281FSSL223410/316-1 . ..................................................................... 284FSSO2210/316-1 . ......................................................................... 287FSSOL223410/316-1 . .................................................................. 282FSSOR223410/316-1 . .................................................................. 283FSSR223410/316-1 . .................................................................... 285FWHB1819-3 . ................................................................................ 275
HHDWC2414-FM-R . ......................................................................... 345HDWC2514-FM-T . .......................................................................... 347HWS0610P-3 . .............................................................................252-AHWS1414P-00 . .............................................................................. 245HWS1420P-00 . .............................................................................. 247HWS6810P-3 . .............................................................................252-BHWSS1518P-00 . ............................................................................ 251
LLBD0814P-1 . ................................................................................. 125LBD1308P-1 . ................................................................................. 111LBD4408P-1 . ................................................................................. 114LBD4410P-1 . ................................................................................. 115
LBD6407-1 . .................................................................................... 105LBD6408-1 . .................................................................................... 106LBD6408/316P-1 . ......................................................................... 322LBD6408P-1 . ................................................................................. 118LBD6410/316PCB-1 . .................................................................... 323LBD6410PCB-1 . ............................................................................. 119LBD6808-1 . .................................................................................... 107LBD7412P-1 . ................................................................................. 124LBD7508-1 . .................................................................................... 108LBD7508P-1 . ................................................................................. 122LBD7510P-1 . ................................................................................. 123LBDDBL6408P-1 . ........................................................................... 198LBDDBR6408P-1 . .......................................................................... 197LBLDC1737P-1 . .......................................................................... 165-FLBLDC1943P-1 . .......................................................................... 165-FLBLRS7008P-1 . ............................................................................. 148LBLS4608P-1 . ................................................................................ 134LBLS6408P-1 . ................................................................................ 136LBLS7008P-1 . ................................................................................ 139LBRDC1737P-1 . .......................................................................... 165-FLBRDC1943P-1 . .......................................................................... 165-FLBRS4608P-1 . ............................................................................... 142LBRS7008P-1 . ............................................................................... 145LBS1306-1 . ...................................................................................... 36LBS1308P-1 . .................................................................................... 51LBS2708-1 . ...................................................................................... 37LBS2708P-1 . .................................................................................... 54LBS4008P-1 . .................................................................................... 65LBS4010P-1 . .................................................................................... 66LBS4408P-1 . .................................................................................... 57LBS4410P-1 . .................................................................................... 58LBS4607-1 . ...................................................................................... 38LBS4607/316P-1 . ......................................................................... 309LBS4608P-1 . .................................................................................... 61LBS4610/316P-1 . ......................................................................... 311LBS4610/316PC-3 . ....................................................................... 312LBS4610P-1 . .................................................................................... 62LBS6108P-1 . .................................................................................... 78LBS6110P-1 . .................................................................................... 79LBS6407/316P-1 . ......................................................................... 313LBS6408P-1 . .................................................................................... 70LBS6410PCB-1 . ............................................................................... 71LBS6807-1 . ...................................................................................... 41LBS6807-2 . ...................................................................................... 41LBS6807/316P-1 . ......................................................................... 316LBS6808-1 . ...................................................................................... 42LBS6808-2 . ...................................................................................... 42LBS6808/316P-1 . ......................................................................... 317LBS6808P-1 . .................................................................................... 74LBS6810-1 . ...................................................................................... 43LBS6810/316P-1 . ......................................................................... 318LBS6810/316P-3 . ......................................................................... 319LBS6810P-1 . .................................................................................... 75LBS7008P-1 . .................................................................................... 82LBS7010P-1 . .................................................................................... 83LBS7308-1 . ...................................................................................... 44LBS7308P-1 . .................................................................................... 90LBS7310P-1 . .................................................................................... 91LBS7312P-1 . .................................................................................... 92LBS7314P-1 . .................................................................................... 93LBS7508-1 . ...................................................................................... 45LBS7508P-1 . .................................................................................... 86LBS7510P-1 . .................................................................................... 87LBS7808P-1 . .................................................................................... 96LBS8014P-1 . .................................................................................... 97
39561562 | SPECIFICATIONS | REV.2016 395
USA: 1-855-526-0503 | commercial-info.us@franke.com
Model Page Model Page
LBS9106-1 . ...................................................................................... 32LBS9106-3 . ...................................................................................... 33LBS9407-1 . ...................................................................................... 34LBS9407-3 . ...................................................................................... 35LBS9407-3 . ...................................................................................... 67LBS9407/316P-1 . ......................................................................... 306LBS9407/316P-3 . ......................................................................... 307LBS9408P-1 . .................................................................................... 48LBSDBL6408P-1 . ........................................................................... 194LBSDBL6810/316P-1 . .................................................................. 331LBSDBL6810P-1 . ........................................................................... 196LBSDBR6408P-1 . ........................................................................... 193LBSDBR6810/316P-1 . .................................................................. 332LBSDBR6810P-1 . ........................................................................... 195LBT6407CB-1 . ................................................................................ 128LBT6410PCB-1 . ............................................................................. 129LBT8610P-1 . .................................................................................. 131LHS4608P-1 . ................................................................................. 151LHS6408P-1 . ................................................................................. 154LHS7308P-1 . ................................................................................. 157LHS8608P-1 . ................................................................................. 160LRS4608P-1 . .................................................................................. 163
OOC6/316 . ....................................................................................... 333
QQC-1W-18P . ................................................................................... 355QC-1W-24P . ................................................................................... 355QC-1W-30P . ................................................................................... 355QC-1W-36P . ................................................................................... 355QC-1W-3030P . ............................................................................... 356QC-2W-2436P . ............................................................................... 357QC-2W-3030P . ............................................................................... 357
RR2570-MIXLF . ................................................................................ 241RC6/316 . ....................................................................................... 335RDL2436-1 . .............................................................................REV-215RDL2436L-1 . ...........................................................................REV-216RDL2436LR-1 . ........................................................................REV-217RDL2436R-1 . ..........................................................................REV-216RDL2448-1 . .............................................................................REV-215RDL2448L-1 . ...........................................................................REV-216RDL2448LR-1 . ........................................................................REV-217RDL2448R-1 . ..........................................................................REV-216RODX600 . ...................................................................................... 360RODX600E . .................................................................................... 362RODX600ME . ................................................................................. 363RODX602 . ...................................................................................... 389RODX602E . .................................................................................... 386RODX605 . ...................................................................................... 387RODX605E . .................................................................................... 388RODX611 . ...................................................................................... 385RODX618 . ...................................................................................... 368RODX618E . .................................................................................... 371RODX619 . ...................................................................................... 372RODX619E . .................................................................................... 373RODX625 . ...................................................................................... 369RODX630 . ...................................................................................... 361RODX672 . ...................................................................................... 377RODX672E . .................................................................................... 378RS14 . .............................................................................................. 294RSL2418-1 . .............................................................................REV-212RSL2418L-1 . ...........................................................................REV-213
RSL2418LR-1 . .........................................................................REV-214RSL2418R-1 . ...........................................................................REV-213RSL2424-1 . .............................................................................REV-212RSL2424L-1 . ...........................................................................REV-213RSL2424LR-1 . .........................................................................REV-214RSL2424R-1 . ...........................................................................REV-213RTL2454-1 . .............................................................................REV-218RTL2454L-1 . ...........................................................................REV-219RTL2454LR-1 . .........................................................................REV-220RTL2454R-1 . ...........................................................................REV-219RTL2472-1 . .............................................................................REV-218RTL2472L-1 . ...........................................................................REV-219RTL2472LR-1 . .........................................................................REV-220RTL2472R-1 . ...........................................................................REV-219
SS4206-1 . .......................................................................................... 20S6108P-1 . ........................................................................................ 27S6407/316P-1 . ............................................................................. 300S6408-1 . .......................................................................................... 21S6410/316PCB-1 . ......................................................................... 302S6410PCB-1 . ................................................................................... 25S6808-1 . .......................................................................................... 22S6808/316P-1 . ............................................................................. 303S6810-1 . .......................................................................................... 23S6810/316P-1 . ............................................................................. 304S6810/316P-3 . ............................................................................. 305S7308-1 . .......................................................................................... 24S7310P-1 . ........................................................................................ 28S7312P-1 . ........................................................................................ 29S7312P-2 . ........................................................................................ 29S7314P-1 . ........................................................................................ 30S8014P-1 . ........................................................................................ 31S9106-1 . .......................................................................................... 17S9106-3 . .......................................................................................... 18S9106/316P-1 . ............................................................................. 296S9106/316P-3 . ............................................................................. 297S9407-1 . .......................................................................................... 19S9407/316P-1 . ............................................................................. 298S9407/316P-3 . ............................................................................. 299SANW200 . ..................................................................................165-ASANW205 . ..................................................................................165-BSANW211 . ..................................................................................165-CSANW212 . ..................................................................................165-DSANW215 . .................................................................................. 165-ESD80V . ........................................................................................... 365SD80V-EXT . .................................................................................... 365SDL2436-1 . .............................................................................REV-206SDL2436L-1 . ...........................................................................REV-207SDL2436LR-1 . ........................................................................REV-208SDL2436R-1 . ..........................................................................REV-207SDL2448-1 . .............................................................................REV-206SDL2448L-1 . ...........................................................................REV-207SDL2448LR-1 . ........................................................................REV-208SDL2448R-1 . ..........................................................................REV-207SL2424-1 . ...................................................................................... 199SL2424-5 . ...................................................................................... 199SL2424/316-1 . ............................................................................. 328SL2424/316-5 . ............................................................................. 328SL2448-1 . ...................................................................................... 199SL2448-5 . ...................................................................................... 199SL2448/316-1 . ............................................................................. 328SL2448/316-5 . ............................................................................. 328SS9126 . ......................................................................................... 295SSL2418-1 . .............................................................................REV-203
39661562 | SPECIFICATIONS | REV.2016 396
USA: 1-855-526-0503 | commercial-info.us@franke.com
Model Page Model Page
SSL2418L-1 . ...........................................................................REV-204SSL2418LR-1 . .........................................................................REV-205SSL2418R-1 . ...........................................................................REV-204SSL2424-1 . .............................................................................REV-203SSL2424L-1 . ...........................................................................REV-204SSL2424LR-1 . .........................................................................REV-205SSL2424R-1 . ...........................................................................REV-204SSS1827 . ....................................................................................... 288SSS1827DDS . ................................................................................ 291SSS1827SDSL . .............................................................................. 290SSS1827SDSR . .............................................................................. 289SSU1-00 . .................................................................................REV-235SSU1-10 . .................................................................................REV-235SSU1-11 . .................................................................................REV-235SSU1-20 . .................................................................................REV-235SSU1-2016-00 . .............................................................................. 232SSU1-2020-00 . .............................................................................. 233SSU2-00 . .................................................................................REV-237SSU2-10 . .................................................................................REV-237SSU2-11 . .................................................................................REV-237SSU2-20 . .................................................................................REV-237SSU2-2040-00 . .............................................................................. 234SSU3-00 . .................................................................................REV-239SSU3-10 . .................................................................................REV-239SSU3-11 . .................................................................................REV-239SSU3-20 . .................................................................................REV-239SSU-BS . .......................................................................................... 244STL2454-1 . .............................................................................REV-209STL2454L-1 . ...........................................................................REV-210STL2454LR-1 . .........................................................................REV-211STL2454R-1 . ...........................................................................REV-210STL2472-1 . .............................................................................REV-209STL2472L-1 . ...........................................................................REV-210STL2472LR-1 . .........................................................................REV-211STL2472R-1 . ...........................................................................REV-210STRX692 . ....................................................................................... 353STRX694 . ....................................................................................... 354
TT6410PCB-1 . .................................................................................. 126T8610-1 . ........................................................................................ 127TL2454-1 . ...................................................................................... 201TL2454-5 . ...................................................................................... 201TL2472-1 . ...................................................................................... 201TL2472-5 . ...................................................................................... 201
UUCD6405P-1 . ................................................................................. 168UCD6408P-1 . ................................................................................. 169UCS4608/316P-1 . ........................................................................ 324UCS4610/316P-1 . ........................................................................ 325UCS6105P-1 . ..............................................................................169-AUCS6805P-1 . ................................................................................. 166UCS6808/316P-1 . ........................................................................ 326UCS6808P-1 . ................................................................................. 167UCS6810/316P-1 . ........................................................................ 327
WWDL2436-1 .............................................................................REV-224WDL2436L-1 ...........................................................................REV-225WDL2436LR-1 . .......................................................................REV-226WDL2436R-1 . .........................................................................REV-225WDL2448-1 .............................................................................REV-224WDL2448L-1 ...........................................................................REV-225WDL2448LR-1 . .......................................................................REV-226
WDL2448R-1 . .........................................................................REV-225WHB1616-3 . .................................................................................. 253WHB1617-3 . .................................................................................. 256WHB1617-6 . .................................................................................. 254WHB1617-7 . .................................................................................. 255WHB1617/316-3 . ......................................................................... 336WHB1819-3 . .................................................................................. 258WHB1819-6 . .................................................................................. 259WHB1819-7 . .................................................................................. 260WHB1819/316-3 . ......................................................................... 338WHB2221-7 . .................................................................................. 264WHB2221-8 . .................................................................................. 265WHB2221-RS . ................................................................................ 267WHB2221-UC . ............................................................................... 267WHB5222-7 . .................................................................................. 268WHB5222-PW ♦ . ............................................................................... 7WHBS181910-3 . ........................................................................... 262WHBS181910/316-3 . ................................................................... 342WSL2418-1 . ............................................................................REV-221WSL2418L-1 . ..........................................................................REV-222WSL2418LR-1 . ........................................................................REV-223WSL2418R-1 . ..........................................................................REV-222WSL2424-1 . ............................................................................REV-221WSL2424L-1 . ..........................................................................REV-222WSL2424LR-1 . ........................................................................REV-223WSL2424R-1 . ..........................................................................REV-222WSS6713 . ...................................................................................... 276WT310E-7 . ..................................................................................... 274WT400C-7 . ..................................................................................... 270WT400C-8 . ..................................................................................... 270WT500C-7 . ..................................................................................... 271WT500C-8 . ..................................................................................... 271WT600C-7 . ..................................................................................... 272WT600C-8 . ..................................................................................... 272WTL2454-1 . ................................................................................226-AWTL2454L-1 . ..............................................................................226-BWTL2454LR-1 . ............................................................................226-CWTL2454R-1 . ..............................................................................226-BWTL2472-1 . ................................................................................226-AWTL2472L-1 . ..............................................................................226-BWTL2472LR-1 . ............................................................................226-CWTL2472R-1 . ..............................................................................226-BWT-RS . ............................................................................................ 273WTS36-1 . ....................................................................................... 293WTS48-1 . ....................................................................................... 293WTS60-1 . ....................................................................................... 293WTS72-1 . ....................................................................................... 293WTS2025-1 . ................................................................................... 292WTS2031-1 . ................................................................................... 292WTS2036-1 . ................................................................................... 292WTS2048-1 . ................................................................................... 292WTS2060-1 . ................................................................................... 292WTS2072-1 . ................................................................................... 292WTS2096-1 . ................................................................................... 292
39761562 | SPECIFICATIONS | REV2016 www.franke-commercial.com
USA: 1-855-526-0503 | commercial-info.us@franke.com
Shipping MinimumAll Franke COMMERCIAL products are eligible for prepaid shipping (minimum 800 lbs, total order requirement) and can be combined with other eligible FRANKE KINDRED CANADA products. Franke COMMERCIAL SYSTEMS are neither eligible for, nor considered in the calculation of Jumbo Discount.
Payment TermsOur payment terms are: 2% - 30 days, net 45. All prices and product specifications are subject to change without notice resulting from occasional changes to product design.
Returns PolicyAny returned goods must be accompanied by a Return Goods Authorization form which must be provided by the sales representative in your territory. If the goods are not defective, a 25% restocking fee will be assessed by our representative upon inspection. Custom made sinks are not returnable. Sinks with custom faucet hole drillings are not returnable. Products which are obsolete and not included in our current catalogue are non-returnable.
Procedure for Custom SinksRequests should be accompanied by a thoroughly completed copy of the check list as furnished in the Custom Sinks section. A sketch would be helpful in many cases. Job names and quantities must be provided.
A quote will be returned, based on the information you provide. An approval drawing will not be prepared until we receive a pur-chase order at which time we will prepare the drawing and return it for approval by the specifier. Allow up to 48 hours for generation of the drawing. Production will not proceed until Franke Commercial has received the signed approval drawing. Quality System Registration to ISO 9001 Environmental Management System ISO 14001 LEED StatementGreen-Buildings’ team of LEED® Accredit-ed Professionals have performed a benchmark analysis of Franke Commercial Systems' sinkware and determined that these products may:1. Improve Building Durability2. Reduce Demand for Raw Materials3. Improve Indoor Environmental Quality
Green-Buildings believes that several characteristics of Franke Commercial's sinkware are congruent with green building principles and, as such, these products may be considered applicable to high performance buildings and also may contribute meaningfully to green building projects that pursue a LEED® Certification.
For full details of your selected product, feel free to contact us for details.
ConDiTionS, PoLiCiES & PRoCEDuRES
APR 2016
Franke Kindred Canada Ltd. Commercial Systems 1000 Franke Kindred Road Midland, ON L4R 4K9 Tel 855-446-5663 Fax 866-227-3050 commercial-info.us@franke.com www.franke-commercial.com
Changes in dimensions, construction and models reserved.Printed in Canada.
Effective February 1, 2016