Post on 13-Jul-2020
Ein Unternehmen der TÜNKERS Gruppe Ein Unternehmen der TÜNKERS Gruppe
SPECIAL APPLICATIONS
Ein Unternehmen der TÜNKERS Gruppe CAROUSELS
Ein Unternehmen der TÜNKERS Gruppe
CAROUSELS
- Nb of arms: 3
- Rotation: 120° in 2 sec.
- Vertical movement: 350 mm in 2 sec
Manufacturing time: 12 weeks
After approval of the design studies
3
Ein Unternehmen der TÜNKERS Gruppe
CAROUSELS
- Nb of arms: 4
- Rotation: 90° in 3 sec.
- Vertical movement: 800 mm in 4 sec
Manufacturing time: 16 weeks
After approval of the design studies
4
Ein Unternehmen der TÜNKERS Gruppe
TRUNNIONS
Ein Unternehmen der TÜNKERS Gruppe
TRUNNIONS
Trunnions 2, 3 or 4 faces
Up to 5m long and more
Manufacturing time: 16 weeks
After approval of the design studies
6
Ein Unternehmen der TÜNKERS Gruppe
TRUNNIONS
Returner 90° or 180°
Manufacturing time: 10 weeks
After approval of the design studies
7
Ein Unternehmen der TÜNKERS Gruppe
TRUNNIONS
Returner 180°
Manufacturing time: 10 weeks
After approval of the design studies
8
Ein Unternehmen der TÜNKERS Gruppe LIFT UNITS
Ein Unternehmen der TÜNKERS Gruppe
LIFT UNITS
Lift unit for table with followers
Vertical rise :
100 mm + 300 mm in 3 sec.
Manufacturing time: 16 weeks
After approval of the design studies
11
Ein Unternehmen der TÜNKERS Gruppe
LIFT UNITS
Lift unit with 4 mecanically synchronized columns
Vertical rise : 600 mm in 4 sec.
Manufacturing time: 16 weeks
After approval of the design studies
12
Ein Unternehmen der TÜNKERS Gruppe
LIFT UNITS
- Lift unit with 2 sychronized columns
- Reinforced tilting torque
- Vertical rise: 600mm in 3sec.
Manufacturing time: 16 weeks
After approval of the design studies
13
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT ® MANIPULATORS
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT ® MANIPULATORS
- Nb of axes: 3
- Rotation: 2 x 90°
- Vertical rise: 900 mm
- Rollover: 180°
Manufacturing time: 16 weeks
After approval of the design studies
16
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT® MANIPULATORS
- Nb of axes: 3
- Rotation: 180°
- Vertical rise: 50 mm
- Extension of the double arm: 300mm
Manufacturing time: 16 weeks
After approval of the design studies
17
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT® MANIPULATORS
- Nb of axes: 2
- Rotation: 90°
- Vertical rise: 400 mm
Manufacturing time: 12 weeks
After approval of the design studies
18
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT® MANIPULATORS
- Nb of axes: 2
- Rotation: 120°
- Vertical rise: 25 mm
Manufacturing time: 12 weeks
After approval of the design studies
19
Ein Unternehmen der TÜNKERS Gruppe
SOPAMAT® MANIPULATORS
- Nb of axes: 2
- Rotation: 2 x 90°
- Vertical rise: 900 mm
Manufacturing time: 16 weeks
After approval of the design studies
20
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Space-saving indexing table with integrated motor (TSI serie) Application in automotive industry
Manufacturing time:
- 12 weeks (small indexing tables)
- 16 weeks (big indexing tables)
After approval of the design studies
22
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Indexing table with reinforced seal (TS serie)
Application in glass industry
Manufacturing time: 16 weeks
After approval of the design studies
23
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Indexing table with globoid cam (TG serie)
Application in packaging and conditionning industry
Manufacturing time: 16 weeks
After approval of the design studies
24
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Indexing table with drum cam (heavyTS serie)
Application in automotive industry
Manufacturing time: 16 weeks
After approval of the design studies
25
Ein Unternehmen der TÜNKERS Gruppe
CUSTOMIZED STANDARDS
Indexing table cylindrical cam woth oil bath ( type V250 )
Application in packaging industry for plastic bottles injection
- Linear stroke : 22mm
- 300 rotation / min
- 36 000 cycles / hour
- Allowable axial load 1,5Kg
Manufacturing time: 8 weeks
After approval of the design studies
Ein Unternehmen der TÜNKERS Gruppe
LINEAR UNITS
Ein Unternehmen der TÜNKERS Gruppe
- Horizontal linear unit with drum cam
- Stroke: 1200 mm in 3 sec.
Manufacturing time: 16 weeks
After approval of the design studies
LINEAR UNITS
28
Ein Unternehmen der TÜNKERS Gruppe
LINEAR UNITS
- Horizontal linear unit with drum cam
- Stroke: 850 mm in 5 sec.
Manufacturing time: 16 weeks
After approval of the design studies
29
Ein Unternehmen der TÜNKERS Gruppe
LINEAR UNITS
- Vertical linear unit with drum cam
- And multiple plates
- Stroke:
- 300 mm in 2 sec
- 150 mm in 1,5 sec
- 200 mm in 1,5 sec
Manufacturing time: 16 weeks
After approval of the design studies
30
Ein Unternehmen der TÜNKERS Gruppe
LINEAR UNITS
- Vertical linear unit with drum cam
- And integrated motor
- Stroke: 600 mm in 3 sec.
Manufacturing time: 16 weeks
After approval of the design studies
31
Ein Unternehmen der TÜNKERS Gruppe
LINEAR UNITS
Lift table put into motion by linear unit Linear unit with drum cam and hydropneumatic assistance
Manufacturing time: 16 weeks
After approval of the design studies
32
Ein Unternehmen der TÜNKERS Gruppe
DEPALLETISER
Ein Unternehmen der TÜNKERS Gruppe
DEPALLETISER
AE table (crown and pinion) put into motion either by a index drive with drum cam or by a servo gear motor
Manufacturing time: 16 weeks
After approval of the design studies
34
Ein Unternehmen der TÜNKERS Gruppe
DEPALLETISER
Rotary depalletiser for containers (180°)
with:
- indexing table with drum cam
- Mechanical Tünkers lock
- Mechanical stop
Manufacturing time: 12 weeks
After approval of the design studies
35
Ein Unternehmen der TÜNKERS Gruppe
DEPALLETISER
Rotary depalletiser for containers
With:
- Chain elevator
- Turn table with drum cam
Manufacturing time: 16 weeks
After approval of the design studies
36
Ein Unternehmen der TÜNKERS Gruppe
DEPALLETISER
Linear depalletiser for container with 4 synchronized arms
- Horizontal translation: 1400 mm
- Vertical lift: 120 mm
Manufacturing time: 16 weeks
After approval of the design studies
37
Ein Unternehmen der TÜNKERS Gruppe
OUR FLAGSHIP STANDARDS
Ein Unternehmen der TÜNKERS Gruppe
TS 920 PRODUCT RANGE TS
Indexing table with drum cam.
Designed to be compact, with high
capacity and mechanical rigidity.
Maximal axial load: 80 T
Manufacturing time: 8 weeks
After approval of the design studies
Other available standard sizes:
100 – 200 – 300 – 500 – 580 – 1100 – 1500
40
Ein Unternehmen der TÜNKERS Gruppe
C100 PRODUCT RANGE «CUBE»
The compact version of the « TS » family
Manufacturing time: 5 weeks
After approval of the design studies
Other available standard sizes:
300 and 500
41
Ein Unternehmen der TÜNKERS Gruppe
TXE and TXT PRODUCT RANGE «SIMPLEX»
SIMPLE AND ROBUST DESIGN:
- pinion and gearwheel
- simple transmission
- economical
- proven technology
- high efficiency
- high-precision gear and bearing
- noiselessness
- low integration costs
Available sizes: 400 – 750 and 110
Manufacturing time: 8 weeks
After approval of the design studies
42
TXE
TRE
Ein Unternehmen der TÜNKERS Gruppe
TXR PRODUCT RANGE «SIMPLEX» SIMPLE AND ROBUST DESIGN:
- pinion and toothed belt
- ultra reduced thickness - easier maintenance thank to the remote geared motor
- economical
- proven technology
- high efficiency
- high-precision gear and bearing
- noiselessness
- low integration costs - Many options available upon request
Available sizes: 400 – 750 and 1100
Manufacturing time: 8 weeks
After approval of the design studies
Ein Unternehmen der TÜNKERS Gruppe
SOPAP AUTOMATION PA Ardennes Emeraude
Rue Henri Faure FR-08090 TOURNES
FRANCE
Tel: 0033 3 24 52 94 64 Fax: 0033 3 24 52 88 02
E-mail: ventes@sopap.com www.sopap.com