Post on 06-Sep-2018
R-312/200HYDRAULIC ROTARY RIG
In 1990 Soilmec was awarded the certification of its own
Quality System to ISO 9001/UNI 29001 series standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
R-312/200HYDRAULIC ROTARY RIG
In 1990 Soilmec was awarded the certification of its own
Quality System to ISO 9001/UNI 29001 series standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
HYDRAULIC ROTARY RIG
A new model
R-312/200
1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders
2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring
3 - Winch assembly
4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop
5 - Self-erecting mast composed by an intermediate element 11.9 m long and
a top element 3.5 m long. The max torquecan be applied all over the mast length
6 - Sheave cathead
7 - Crowd system by means of 3.5 mhydraulic cylinder
8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed
9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type
3 12
5
7
9
8
6 R-312/200 R-312/200
CFA 360° versionCFA standard version
Transport Condition Transport Condition
Working Condition Working Condition
1050
0
5250
1932
2550
1267
2553
3500(3000+3500)
4500
2256
3198
3500
PU
LL D
OW
N S
TR
OK
E
395 750
890
1778
4 1049
0 8646
830
3500 (MIN. 3000) 3621
885
6000
ø 750
750
2490
0
1660
0
1350
0M
AX
DE
PT
H: 1
3000
(19
000)
EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm
3500(3000÷3500)
45103500
520 94
0
6000
2174
2
1622
8
1300
0M
AX
DE
PT
H: 1
2500
+60
0045
0 500
3950MIN. 2750 MAX. 3950
344
3710
3666
795
2540
3277
1652
952
3269
1199
4510
1360
1986
4311
885
1279 16
52
12090
1474
718
1870
WEIGHT: 1000 kg
3426
1652
952
1199
3269 4510
WEIGHT: 33000 kg
12119
1397
3254
4340
795
852 16
49
Max pile diameterMax pile depth
Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)
4
After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)
The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
Standard dimension of tool connection is 130x130 mm / H
=
kelly stub height from ground level
2,93,33,98,59,010,311,512,2
5,05,04,68,38,36,764,773,86
7,59,011,010,511,513,515,516,5
25,034,038,046,551,562,072,076,5
4x4x4x5x5x5x5x5x
Mechanical locking kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
2,42,93,33,94,35,1
5,05,05,04,65,04,6
6,07,59,011,09,011,0
19,025,032,039,040,048,0
4x4x4x4x5x5x
Friction kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
mmmm
kNmrpmrpmkNkN
typeBHPkN
tonstons
150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)
1304215313356
CUMMINS QSB5.9200 @ 2200 rpm
123.7 / 101.83534
mmmkN
tons
75013-638031
Max pile diameterMax pile depthMax nominal extraction forceTransport weight
Continuous Flight Auger (CFA)
LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER
Inside cabin view
Low overhead version Standard version
2500
2540
600
707 15
09
HYDRAULIC ROTARY RIG
A new model
R-312/200
1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders
2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring
3 - Winch assembly
4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop
5 - Self-erecting mast composed by an intermediate element 11.9 m long and
a top element 3.5 m long. The max torquecan be applied all over the mast length
6 - Sheave cathead
7 - Crowd system by means of 3.5 mhydraulic cylinder
8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed
9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type
3 12
5
7
9
8
6 R-312/200 R-312/200
CFA 360° versionCFA standard version
Transport Condition Transport Condition
Working Condition Working Condition
1050
0
5250
1932
2550
1267
2553
3500(3000+3500)
4500
2256
3198
3500
PU
LL D
OW
N S
TR
OK
E
395 750
890
1778
4 1049
0 8646
830
3500 (MIN. 3000) 3621
885
6000
ø 750
750
2490
0
1660
0
1350
0M
AX
DE
PT
H: 1
3000
(19
000)
EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm
3500(3000÷3500)
45103500
520 94
0
6000
2174
2
1622
8
1300
0M
AX
DE
PT
H: 1
2500
+60
0045
0 500
3950MIN. 2750 MAX. 3950
344
3710
3666
795
2540
3277
1652
952
3269
1199
4510
1360
1986
4311
885
1279 16
52
12090
1474
718
1870
WEIGHT: 1000 kg
3426
1652
952
1199
3269 4510
WEIGHT: 33000 kg
12119
1397
3254
4340
795
852 16
49
Max pile diameterMax pile depth
Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)
4
After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)
The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
Standard dimension of tool connection is 130x130 mm / H
=
kelly stub height from ground level
2,93,33,98,59,010,311,512,2
5,05,04,68,38,36,764,773,86
7,59,011,010,511,513,515,516,5
25,034,038,046,551,562,072,076,5
4x4x4x5x5x5x5x5x
Mechanical locking kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
2,42,93,33,94,35,1
5,05,05,04,65,04,6
6,07,59,011,09,011,0
19,025,032,039,040,048,0
4x4x4x4x5x5x
Friction kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
mmmm
kNmrpmrpmkNkN
typeBHPkN
tonstons
150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)
1304215313356
CUMMINS QSB5.9200 @ 2200 rpm
123.7 / 101.83534
mmmkN
tons
75013-638031
Max pile diameterMax pile depthMax nominal extraction forceTransport weight
Continuous Flight Auger (CFA)
LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER
Inside cabin view
Low overhead version Standard version
2500
2540
600
707 15
09
HYDRAULIC ROTARY RIG
A new model
R-312/200
1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders
2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring
3 - Winch assembly
4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop
5 - Self-erecting mast composed by an intermediate element 11.9 m long and
a top element 3.5 m long. The max torquecan be applied all over the mast length
6 - Sheave cathead
7 - Crowd system by means of 3.5 mhydraulic cylinder
8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed
9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type
3 12
5
7
9
8
6 R-312/200 R-312/200
CFA 360° versionCFA standard version
Transport Condition Transport Condition
Working Condition Working Condition
1050
0
5250
1932
2550
1267
2553
3500(3000+3500)
4500
2256
3198
3500
PU
LL D
OW
N S
TR
OK
E
395 750
890
1778
4 1049
0 8646
830
3500 (MIN. 3000) 3621
885
6000
ø 750
750
2490
0
1660
0
1350
0M
AX
DE
PT
H: 1
3000
(19
000)
EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm
3500(3000÷3500)
45103500
520 94
0
6000
2174
2
1622
8
1300
0M
AX
DE
PT
H: 1
2500
+60
0045
0 500
3950MIN. 2750 MAX. 3950
344
3710
3666
795
2540
3277
1652
952
3269
1199
4510
1360
1986
4311
885
1279 16
52
12090
1474
718
1870
WEIGHT: 1000 kg
3426
1652
952
1199
3269 4510
WEIGHT: 33000 kg
12119
1397
3254
4340
795
852 16
49
Max pile diameterMax pile depth
Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)
4
After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)
The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)
The nominal values are referred to 100% total efficiency.
Large diameter bored pile
Standard dimension of tool connection is 130x130 mm / H
=
kelly stub height from ground level
2,93,33,98,59,010,311,512,2
5,05,04,68,38,36,764,773,86
7,59,011,010,511,513,515,516,5
25,034,038,046,551,562,072,076,5
4x4x4x5x5x5x5x5x
Mechanical locking kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
2,42,93,33,94,35,1
5,05,05,04,65,04,6
6,07,59,011,09,011,0
19,025,032,039,040,048,0
4x4x4x4x5x5x
Friction kelly bar – Ø 355 mmelements
nolength
mdepth
mweighttonn
heightm
mmmm
kNmrpmrpmkNkN
typeBHPkN
tonstons
150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)
1304215313356
CUMMINS QSB5.9200 @ 2200 rpm
123.7 / 101.83534
mmmkN
tons
75013-638031
Max pile diameterMax pile depthMax nominal extraction forceTransport weight
Continuous Flight Auger (CFA)
LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER
Inside cabin view
Low overhead version Standard version
2500
2540
600
707 15
09
R-312/200HYDRAULIC ROTARY RIG
In 1990 Soilmec was awarded the certification of its own
Quality System to ISO 9001/UNI 29001 series standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t
R-312/200HYDRAULIC ROTARY RIG
In 1990 Soilmec was awarded the certification of its own
Quality System to ISO 9001/UNI 29001 series standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t