Post on 06-Sep-2018
R-620HYDRAULIC ROTARY RIG
G r o u n d E n g i n e e r i n g E q u i p m e n t
In 1990 Soilmec was awarded with the certification of its
Quality System Complying with ISO 9001:2000/UNI 29001
standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n t
07/2
004-
1500
-D/F
-Cils
-Il D
igita
le
2049
8
1650
045
70
- 30
00 -
600
011
39
1000
3900 ( 3400 )
1893
1028
7387
144013
000
2121
0
5620
9860
2105
235
2250
1275
0
446
900
3800
PULL-DOWNHIGH POSITION
PULL-DOWNLOW POSITION
1450
0
2121
0
1100
1275
0
5600
1060
4000 ( 3400 )
3856
5456
1600
446
2250
1961
8594
5000
240
165
1440
446
2121
0
1002
5
5600
1100
4000 ( 3400 )
1275
022
5019
61
A new model
R-620LARGE DIAMETER PILES
Transport Condition - Standard Version
CROWD SYSTEM BY WINCH / CFA
Working ConditionStandard version
Working ConditionStd. with Casing Oscillator Crowd System by Winch
The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.
1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.
2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.
3 Winch assembly.
4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.
5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.
6 Sheave cathead.
7 Crowd system by 5,6 m. hydraulic cylinder.
8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.
9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.
10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).
4
7
9
8
1
6
10
Transport Condition - CFA
5
R-620 R-620
The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:
- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.
The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees
slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).
CFA version
4450
750
2990
3000
137614181
12750
3050 5900
700
3324
4024
552250
2
3
980
14181
12750
2250
551376
3320
.5
4220
.5
379
4170 5264
15500
837
900
440035
00
1310
H = Kelly stub height from ground level * Height limited by rotary position
HYDRAULIC DRILLING RIG
The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.
Large diameter bored pile
Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1
Max powerCrowd system by cylinder with 2 mounting positions
Pull down strokeCable crowd system (13 m stroke)Operating weight
mmmmm
kNmrpmrpmkNkN
typekW (BHP)
kNmmkNton
18001500662013414419280
CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150
5600200 / 200
63
mmmkN
kNmrpmton
900 / 100022,560020134
60 - 63
Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight
Continuous Flight Auger (CFA)
Mechanical locking kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
5,25,66,47,27,7
8,1*7,96,24,43,5
9,010,012,013,514,5
32,035,042,049,053,0
4x4x4x4x4x
Friction kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
4,05,76,37,14,95,56,46,97,17,4
8,1*7,66,44,4
8,1*7,65,94,54,23,6
9,010,511,513,59,0
10,512,013,514,014,5
32,037,041,550,039,546,055,062,063,566,0
4x4x4x4x5x5x5x5x5x5x
2049
8
1650
045
70
- 30
00 -
600
011
39
1000
3900 ( 3400 )
1893
1028
7387
144013
000
2121
0
5620
9860
2105
235
2250
1275
0
446
900
3800
PULL-DOWNHIGH POSITION
PULL-DOWNLOW POSITION
1450
0
2121
0
1100
1275
0
5600
1060
4000 ( 3400 )
3856
5456
1600
446
2250
1961
8594
5000
240
165
1440
446
2121
0
1002
5
5600
1100
4000 ( 3400 )
1275
022
5019
61
A new model
R-620LARGE DIAMETER PILES
Transport Condition - Standard Version
CROWD SYSTEM BY WINCH / CFA
Working ConditionStandard version
Working ConditionStd. with Casing Oscillator Crowd System by Winch
The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.
1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.
2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.
3 Winch assembly.
4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.
5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.
6 Sheave cathead.
7 Crowd system by 5,6 m. hydraulic cylinder.
8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.
9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.
10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).
4
7
9
8
1
6
10
Transport Condition - CFA
5
R-620 R-620
The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:
- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.
The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees
slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).
CFA version
4450
750
2990
3000
137614181
12750
3050 5900
700
3324
4024
552250
2
3
980
14181
12750
2250
551376
3320
.5
4220
.5
379
4170 5264
15500
837
900
440035
00
1310
H = Kelly stub height from ground level * Height limited by rotary position
HYDRAULIC DRILLING RIG
The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.
Large diameter bored pile
Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1
Max powerCrowd system by cylinder with 2 mounting positions
Pull down strokeCable crowd system (13 m stroke)Operating weight
mmmmm
kNmrpmrpmkNkN
typekW (BHP)
kNmmkNton
18001500662013414419280
CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150
5600200 / 200
63
mmmkN
kNmrpmton
900 / 100022,560020134
60 - 63
Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight
Continuous Flight Auger (CFA)
Mechanical locking kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
5,25,66,47,27,7
8,1*7,96,24,43,5
9,010,012,013,514,5
32,035,042,049,053,0
4x4x4x4x4x
Friction kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
4,05,76,37,14,95,56,46,97,17,4
8,1*7,66,44,4
8,1*7,65,94,54,23,6
9,010,511,513,59,0
10,512,013,514,014,5
32,037,041,550,039,546,055,062,063,566,0
4x4x4x4x5x5x5x5x5x5x
2049
8
1650
045
70
- 30
00 -
600
011
39
1000
3900 ( 3400 )
1893
1028
7387
144013
000
2121
0
5620
9860
2105
235
2250
1275
0
446
900
3800
PULL-DOWNHIGH POSITION
PULL-DOWNLOW POSITION
1450
0
2121
0
1100
1275
0
5600
1060
4000 ( 3400 )
3856
5456
1600
446
2250
1961
8594
5000
240
165
1440
446
2121
0
1002
5
5600
1100
4000 ( 3400 )
1275
022
5019
61
A new model
R-620LARGE DIAMETER PILES
Transport Condition - Standard Version
CROWD SYSTEM BY WINCH / CFA
Working ConditionStandard version
Working ConditionStd. with Casing Oscillator Crowd System by Winch
The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.
1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.
2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.
3 Winch assembly.
4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.
5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.
6 Sheave cathead.
7 Crowd system by 5,6 m. hydraulic cylinder.
8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.
9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.
10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).
4
7
9
8
1
6
10
Transport Condition - CFA
5
R-620 R-620
The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:
- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.
The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees
slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).
CFA version
4450
750
2990
3000
137614181
12750
3050 5900
700
3324
4024
552250
2
3
980
14181
12750
2250
551376
3320
.5
4220
.5
379
4170 5264
15500
837
900
440035
00
1310
H = Kelly stub height from ground level * Height limited by rotary position
HYDRAULIC DRILLING RIG
The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.
Large diameter bored pile
Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1
Max powerCrowd system by cylinder with 2 mounting positions
Pull down strokeCable crowd system (13 m stroke)Operating weight
mmmmm
kNmrpmrpmkNkN
typekW (BHP)
kNmmkNton
18001500662013414419280
CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150
5600200 / 200
63
mmmkN
kNmrpmton
900 / 100022,560020134
60 - 63
Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight
Continuous Flight Auger (CFA)
Mechanical locking kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
5,25,66,47,27,7
8,1*7,96,24,43,5
9,010,012,013,514,5
32,035,042,049,053,0
4x4x4x4x4x
Friction kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
4,05,76,37,14,95,56,46,97,17,4
8,1*7,66,44,4
8,1*7,65,94,54,23,6
9,010,511,513,59,0
10,512,013,514,014,5
32,037,041,550,039,546,055,062,063,566,0
4x4x4x4x5x5x5x5x5x5x
2049
8
1650
045
70
- 30
00 -
600
011
39
1000
3900 ( 3400 )
1893
1028
7387
144013
000
2121
0
5620
9860
2105
235
2250
1275
0
446
900
3800
PULL-DOWNHIGH POSITION
PULL-DOWNLOW POSITION
1450
0
2121
0
1100
1275
0
5600
1060
4000 ( 3400 )
3856
5456
1600
446
2250
1961
8594
5000
240
165
1440
446
2121
0
1002
5
5600
1100
4000 ( 3400 )
1275
022
5019
61
A new model
R-620LARGE DIAMETER PILES
Transport Condition - Standard Version
CROWD SYSTEM BY WINCH / CFA
Working ConditionStandard version
Working ConditionStd. with Casing Oscillator Crowd System by Winch
The new R-620 is installed on new “Caterpillar” turret with easyaccess to any hydraulic and mechanical parts. New designed cabinallows better visibility and easier way of use.
1 Undercarriage class D6D CAT with tracksexpandable by means of hydraulic cylinder.
2 Base machine Caterpillar 3.30 C high power module c/w diesel engine C9 ATAACand sound proofed canopy, mounted on a 360° degree slew ring.
3 Winch assembly.
4 Parallelogram system which allows tovary the working radius maintaining the mastalways in vertical position.
5 Self-erecting mast which can whitstandthe max torque over the whole length. It iscomposed by 12,75 m intermediate element,2,1 m bottom element and 2,25 m extension.
6 Sheave cathead.
7 Crowd system by 5,6 m. hydraulic cylinder.
8 Rotary head with 4 drilling speeds and onespin-off high speed. For each drilling speedthe max torque is achieved.
9 Telescopic kelly bar with guide on the mast. Available in friction or mechanical locking version.
10 Mechanical and hydraulic pre-arrangementfor casing oscillator (available on request).
4
7
9
8
1
6
10
Transport Condition - CFA
5
R-620 R-620
The R-620 drilling rig on Caterpillar 3.30 C high power module has been designed to perform the following jobs:
- Bored pile, with dry or bentonite system;- Bored pile, with casing installed by oscillator or rotary crowd system;- C.F.A. (Continuous Flight Auger) piles.
The main features of R-620 are the following:- Machine class: 60 tons;- New machine Caterpillar type 3.30 C module c/w diesel engine and sound proofed canopy, mounted on 360 degrees
slew ring;- New electronic engine C9 ATAAC with more power (355 BHP) and meeting the most recent emission regulations;- New powerful rotary: 201 kNm- Completely self erecting; mast able to withstand the max torque over the whole length;- Casing installation by rotary crowd system;- Advanced instrumentation;- Reliability and safety;- Stability and easy to handle;- High productivity;- Easy to transport;- Cable crowd system (optional);- Mechanical and hydraulic pre-arrangement for casing oscillator (available on request).
CFA version
4450
750
2990
3000
137614181
12750
3050 5900
700
3324
4024
552250
2
3
980
14181
12750
2250
551376
3320
.5
4220
.5
379
4170 5264
15500
837
900
440035
00
1310
H = Kelly stub height from ground level * Height limited by rotary position
HYDRAULIC DRILLING RIG
The nominal values are referred to 100% total efficiency. / 1 Meeting the EPA-TIER2 emission regulations.
Large diameter bored pile
Max pile diameterMax cased diameterMax pile depthMax nominal torqueMax drilling speedSpin offMain winch nominal line pullService winch nominal pullEngine1
Max powerCrowd system by cylinder with 2 mounting positions
Pull down strokeCable crowd system (13 m stroke)Operating weight
mmmmm
kNmrpmrpmkNkN
typekW (BHP)
kNmmkNton
18001500662013414419280
CATERPILLAR C9 ATAAC-HEUI261 (355)210 / 150
5600200 / 200
63
mmmkN
kNmrpmton
900 / 100022,560020134
60 - 63
Max pile diameterMax pile depthMax nominal extraction forceMax nominal torqueMax drilling speedOperating weight
Continuous Flight Auger (CFA)
Mechanical locking kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
5,25,66,47,27,7
8,1*7,96,24,43,5
9,010,012,013,514,5
32,035,042,049,053,0
4x4x4x4x4x
Friction kelly bar – Ø 406 mmelements
n°length
mdepth
mweight
tonH height
m
4,05,76,37,14,95,56,46,97,17,4
8,1*7,66,44,4
8,1*7,65,94,54,23,6
9,010,511,513,59,0
10,512,013,514,014,5
32,037,041,550,039,546,055,062,063,566,0
4x4x4x4x5x5x5x5x5x5x
R-620HYDRAULIC ROTARY RIG
G r o u n d E n g i n e e r i n g E q u i p m e n t
In 1990 Soilmec was awarded with the certification of its
Quality System Complying with ISO 9001:2000/UNI 29001
standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n t
07/2
004-
1500
-D/F
-Cils
-Il D
igita
le
R-620HYDRAULIC ROTARY RIG
G r o u n d E n g i n e e r i n g E q u i p m e n t
In 1990 Soilmec was awarded with the certification of its
Quality System Complying with ISO 9001:2000/UNI 29001
standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n t
07/2
004-
1500
-D/F
-Cils
-Il D
igita
le
R-620HYDRAULIC ROTARY RIG
G r o u n d E n g i n e e r i n g E q u i p m e n t
In 1990 Soilmec was awarded with the certification of its
Quality System Complying with ISO 9001:2000/UNI 29001
standards.
CERTIFIED QUALITY SYSTEM
SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:
SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.
SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it
G r o u n d E n g i n e e r i n g E q u i p m e n t
07/2
004-
1500
-D/F
-Cils
-Il D
igita
le