Status of devices in plant, PID parameters (Set value, Present value & output), important process variables as temperature, pressure, flow, levels etc. may be changed or need to change anytime that is why these variable condition must be in observation to ensure healthy operation of a plant.

PC based Observation, Operation &Control system

PC based Observation, Operation & Control system

There is no available software or control system in Bangladesh to solve this problem.

This control system ensures the Observation, Operation and Control of any industry from a suitable position.

System Configuration:

Motor

Dozing pump

Control valve

Temperature

Pressure

PLC

Control Room

System platform:

Whole plant can be visualized in some individual frame as like video page. In these pages the operator can visualizes condition of plants for example motor and electro valves status, PID process regulator status, important process variable as temperature, pressure, flow, levels, etc.

The PLC communicates with PC installed incontrol room where normally the operator works; the operator can manage the plant simply using this PC.

The control system allows the automatic operation of the plant by operators.

From the PC it is possible to open/ close valves, start up and stop motors and pumps, set up parameters of the PID process regulators etc… by simply clicking the relevant item with the mouse and then selecting the desired command.

PC based Observation, Operation & Control system

So, from anywhere

you can observe, operate and

control a plant via this software

simply using a PC.

1st Project: Observation, Operation and Control of a Soap Plant.

Industry: Keya Soap Chemicals Ltd. Jarun, Konabarie, Gazipur.

For example:

Now we see a simple operation

STOP

RUNNING