SN1AT71 Update by SD card SOPHow can I update the software of my HannsPad SN1AT71 from 4.1 to the updated version of 4.2?

A. First check the current version of your tablet B. If the “Build number” is 20130829E then follow SOP AIf the “Build number” is 20131219E then follow SOP BIf the “Build number” is 20140218E or 20140417E then follow SOP C

SN1AT71 Update via SOP A

1. Download the update file from the following URL:http://www.hannspree.eu/uploads/sn1at71.zip

2. Copy the file to the root directory of an emptymicro SD card.

3. Make sure the file name is update.zip.4. Make sure the battery of your tablet is fully

charged.5. Power off your tablet.6. Mount the micro SD card.

SN1AT71 Update via SOP A

7. Press and hold the “Volume —“ & ”Power” key for 3 Seconds to power ON your tablet.After system enters the recovery mode, use the Volume — key to select number 3. “Apply update from SDcard” (see below picture) and confirm with “power” button.

SN1AT71 Update via SOP A

8. Select and confirm ”2. sd-ext/” 9. Select and confirm “update.zip”

10. Update is processing. 11. Remove SD card and press ”Power” key toleave the recovery mode after update is done.

2.update.zip

1.../

1. Download the update file from the following URL: http://www.hannspree.eu/uploads/sn1at71.zip

2. Copy the file to the root directory of an emptymicro SD card.

3. Make sure the file name is update.zip.4. Make sure the battery of your tablet is fully

charged.5. Power off your tablet.6. Mount the micro SD card.

SN1AT71 Update via SOP B

7. Press and hold the “Volume —” & “Power” key for 3Seconds to power on your tablet. Then update willprocess automatically.

8. Tablet will reboot automatically after the update is done.

SN1AT71 Update via SOP B

1. Download the update file from the following URL: http://www.hannspree.eu/uploads/sn1at71.zip

2. Copy the file to the root directory of an emptymicro SD card.

3. Make sure the file name is update.zip.4. Make sure the battery of your tablet is fully

charged.5. Power off your tablet.6. Mount the micro SD card.

SN1AT71 Update via SOP C

7. Press “Power“ key to powerON your tablet. Then updatewill process automatically.

8. Update is done.

9. Remove SD Card and press “Power” key to reboot.

SN1AT71 Update via SOP C