Smart Patch Panel

INTRODUCTION

Products are manufactured in brand new facilities covering 26,000 m2

production area, formerly recognized as Alcatel-Turkey.

%75 of production is exported to Europe, Russia, Asia Pacific

Middle East, North & Sub-Saharan Africa, USA, CIS and Central America.

Branch offices in USA,Greece, Russia, Iran, Indonesia and UAE.

42 Distributors around the globe, coverage of 60 countries.

3

GLOBAL REFERENCES

4

WHY DO WE NEED THE

SMART PATCH PANELS FOR ?

5

Let’s say that we need to change the

direction or the position of a single cable.

How will you find your

cable????

6

How would you feel if your patch panelhad led indicators to discriminate oneport to the other and also assign eachport to an end-user or other equipment?

All ports are remotely configured /controlled by the accompanied software.

7

1. Create a rack-based / room-based / building-based connectionsmap.

2. Assign all available slots into users or equipment.

3. Monitor the status of the connected patch cords.

4. Local & Remote alerts with pop-ups & Emails when the patchcord has accidentally / on purpose been disconnected.

5. Blink the led of the single desired port for easier tracking of thedesired port needed to be modified.

6. Print the map with the assigned ports with real time informationwhether the port is already occupied or not.

7. Log all connections (plug/unplug) with precise date & timeinformation.

Highlights:

8

Slot level information:

Sample email message:

Command: “Show meYvonne’s patch cord”request.

9

All Product Range.

10

All Product Range.

11

All Product Range.

12

All Product Range.

13

Dynamic Comparison.

AMP VS CANOVATE

COMPANY AMP CANOVATE

SYSTEM AMPTRACS SMART P.P.

Hardware

1.Need Master, Expanders and Scanners to achieve a huge system. So it is increase the needed of place and costly.

2.without embedded design. If any port is corrupted, it must change the entire set of equipment that increases high maintenance cost.

1. Flexible and easy expandable.

2. Any corrupted port needs just an individual port reset function.

Software

1.Managed Network Resources via management software.

2.Remote control function, ex: PDA, TCP/IP.

3.Graphical interface.

4.Various functions, but not friendly in use.

5.Need a professional person to use this system.

1.Simple interface is easy to use.

2.Everyone can easily to use this system.

3.Broadcast function.

4.Table interface.

5.Guide functions of Move, Add, Change, Delete channel.

Technology

1.Use 9-pin patch cord to achieve the channel-link detection. So, it must use special patch cord. It is a problem of the costs and storage.

2.Use flex-cable to communication and support power.

3.To expand the system it needs add expander and scanner.

4.Parallel transmission needs more cables.

1.Use regular 8-pin patch cord to achieve the port detection / no stock issue.

2.Alternatively using twist pair cable.

3.To expand system, only add MCU module.

4.Serial transmission that saves number of cables.