Post on 02-Jan-2021
SIMPLIFY YOUR EVERYDAY LIFEBREATHE MORE HEALTHILY.
#HealthyLiving
*Un
art d
e vi
vre
sain
RESIDENTIAL CENTRAL VACUUM CLEANING
WHEN PLAYING ON THE FLOOR WITH MY CHILDREN, I PREFER TO CATCH TOYS RATHER THAN ALLERGIESBy choosing Aldes central vacuum cleaning, I am making things as simple as possible.
CYRIL, FATHER OF TWO CHILDREN.
* Source: Tuan V. Vu, Jakub Ondracek, Vladimir Zdímal, Jaroslav Schwarz, Juana Maria Delgado-Saborit, Roy M. Harrison (2016) Physical properties and lung deposition of particles emitted from five major indoor sources; Air Quality, Atmosphere & Health (2017) 10:1 – 14.
1.6 billion ultrafine particlesWhen using a cylinder vacuum cleaner, an adult's lungs can absorb up to 1.6 billion ultrafine particles`(called PM0,1, less than 0.1 µm in diameter) emitted into the air every minute.*
> 65 %Over two thirds of Scandinavians have central vacuuming in their homes.
2 3
4 5
ADVANTAGESOF ALDES CENTRAL VACUUM CLEANING
Simpler everyday lifeVacuuming is easier and quicker thanks to the ergonomics from the central vacuum cleaning.
Only the suction handle is manipulated.The cyclonic suction of C.Axpir means no more dustbags.
More discretionGone sound nuisances with central vacuum cleaning:
the motor is located outside the living rooms (garage, basement, etc.).Contained under furniture or in a cupboard, the C. Integra unit
is very discrete.
Better indoor air qualityWith central vacuum cleaning, you are helping to limit
allergies and discomfort: the warm suction air, containing dust and allergen particles and sometimes with an
unpleasant smell, is evacuated outside the living rooms.Central vacuum cleaning therefore protects people
with the frailest health.
Easier to installThe Aldes clippable ductwork makes the vacuuming system easy
to install and ensures a perfect seal without applying adhesive. With the Aldes ultra-thin ductwork, the vacuuming system snakes
through the drywalls to facilitate vertical passages.
6
HOW DOES IT WORK? INNOVATIONS
HIGH-END DESIGN OF CENTRAL VACUUM CLEANING
Featuring a contemporary, streamlined design, the C.Axpir central unit is intended for private houses up to 500 m2.
The C.Axpir unit is fitted with cyclonic filtration, known for its efficiency and bag-free operation, is far more comfortable to use.
SOLUTION FOR SMALL AREAS
The C.Compact unit has been designed especially for small areas (apartment, small house, caravan, etc.).
Powerful and silent, it is capable of cleaning all types of floors (tiles, fitted carpet).
C.AXPIR C.COMPACT
RETRACTABLE, PRACTICAL AND AESTHETIC HOSE
The hose has become more practical and aesthetic in our new generation system: it is retracted into the duct in the blink of an eye.
RETRACTABLE HOSE
7
C.INTEGRA
THE MOST COMPACT CENTRAL VACUUM UNIT THAT FITS EVERYWHERE
Contrary to what its small size might let you think, C.Integra is a stand-alone central vacuum unit, intended for all apartments of less than 150 m2.
Very discrete, it is hidden away in a cupboard or under a furniture.
Vacuum easily right into the narrowest corners using the user-friendly handle and the many accessories and brushes available.
Move around freely and lightly thanks to the hose that can vacuum in a wide radius.
Customise the wall socket, the only visible part of the ductwork installed in the walls so that it integrates fully with your interiors.
Maintain air quality with the vacuuming system that carries vacuumed dust and allergens to the central vacuum unit.
The central unit, the heart of the system, recovers the dust and filters the suction air containing fine particles and allergens before discharging it outside the living rooms or even better outside the dwelling.
100% vacuumed
residues, dust and allergens
are discharged outside the living
rooms
8 9
For the longevity and efficiency of the vacuuming system, the installation must be designed and executed in line with the following few principles.
For houses with several floors, ideally the central unit should be located as low as possible with respect to the system (for example, in the basement).
We advise you to install at least:
- 1 socket per 40 m2 in new build- 1 socket per 35 m2 in refurbishment
- Cut the PVC ductwork with a hacksaw,
- Deburr to avoid dust sticking to it,
- For the series T diameter 51, place a layer of adhesive on the male part of the connector or elbow and push in immediately. As the weld is virtually instantaneous, we advise you to do a trial run before applying adhesive.
DUCTWORK Ø 51 MM
The vacuuming system thought out for the best flow rate performances. Ideal for effective dust transport (speed of dust > 110 km/h) and limiting pressure losses.
CLIPPABLE DUCTWORK Ø 44 MM
The easiest vacuuming system to install.The clippable system ensures a perfect seal without applying adhesive.
THIN DUCTWORK Ø 35 x 70 MM
The vacuuming system snakes through the drywalls to facilitate vertical passages.Its flat shape makes it easy to fit between the uprights of standard plasterboard.
- Limit the number of 90° elbows to two at most.
- Use a duct 100 mm in diameter over at least 50 cm before the evacuation grille.
- Use a grille on façade of minimum 100 mm in diameter with minimum airflow passage of 78 cm2
POSITION THE CENTRAL UNIT
DESIGN THE SYSTEM
For optimum vacuuming efficiency, it is important always to:
- minimise the lengths of PVC ducts: avoid more than 40 metres equivalent to the farthest socket
- limit the number of elbows and connectors
- reduce the vertical sections
MANAGE THE DISCHARGE
The discharge system is essential for maintaining the indoor air quality.
A few simple principles govern its implementation.
POSITION THE SUCTION INLETS
The location and number of suction inlets must allow access to all corners in the dwelling.
Ideally, they should be installed in the corridors, entrance halls and if possible near doors. An inlet can also be planned for cleaning the garage, terrace or DIY workshop. The number of inlets is determined by the length of the hose.
All the components in the ALDES central vacuuming system have been designed for easier installation, better dust removal and fewer risks of clogging the system.
GARAGE LAUNDRY ROOMCELLAR
KITCHENTECHNICAL
ROOMCUPBOARD
INSTALLATION ADVICE
RECOMMENDATIONS
FROM THE PROS
RECOMMENDATIONS
FROM THE PROS
RECOMMENDATIONS
FROM THE PROS
RECOMMENDATIONS
FROM THE PROS
Adhesive
10 11
TYPE OF DWELLING
DWELLING SIZE < 500 m² < 300 m² < 300 m² < 300 m² < 150 m² < 90 m²
ALDES SOLUTIONS
C.AXPIR C.POWER C.CLEANER C.DYVAC C.INTEGRA C.COMPACT
PRODUCT CODE 11071140 11071102 11071100 11070388 11071142 11071132
FILTRATIONCyclonic(Dustbag optional)
Dustbag Dustbag Dustbag Dustbag Dustbag
INSTALLATION Garage, cellar Garage, cellar Garage, cellar Garage, cellar Cupboard, under furniture Cupboard, cellar
STARTING Contact 24 V Wireless (Sonis) Wireless (Sonis) Contact 24 V Contact 24 V Contact 24 V
POWER 1700 W 2x1400 W 1400 W 1400 W 1100 W 1300 W
HEAT EXCHANGER 740 Air Watts 2x425 Air Watts 425 Air Watts 425 Air Watts 400 Air Watts 550 Air Watts
NEGATIVE PRESSURE 3100 mm WG 2600 mm WG 2600 mm WG 2600 mm WG 2700 mm WG 2900 mm WG
AIRFLOW 289 m3/h 2 x 210m3/h 210 m3/h 210 m3/h 162 m3/h 180 m3/h
ACOUSTIC PRESSURE
(at 3 m in free field)
68 dB(A) 61 dB(A) 64 dB(A) 65 dB(A) 63 dB(A) 58 dB(A)
VOLUME (bag or tank) 28 L 30 L 30 L 30 L 4 L 10 L
UNIT DIMENSIONS (LxHxD) in mm 400x960x380 410x780x370 410x700x370 410x725x465 388x125x330 460x460x300
UNIT WEIGHT 16 Kg 27 Kg 18 Kg 10 Kg 10 Kg 10.6 Kg
CHOOSE YOUR ALDES CENTRAL VACUUMING SYSTEM WISELY ACCESSORIES
SYSTEM
DESCRIPTION REFERENCE
SYSTEM KIT 51 MM FOR 3 SOCKETS 11070231
SYSTEM KIT 51 MM FOR 2 SOCKETS 11070253
SYSTEM KIT 51 MM FOR 1 SOCKET 11070355
SYSTEM KIT 44 MM FOR 3 SOCKETS 11071031
SYSTEM KIT 44 MM FOR 1 SOCKET 11071030
DRYWALL VERTICAL PASSAGE KIT 32X70 MM 11071060
WHITE SOCKET FOR DRYWALL VERTICAL PASSAGE KIT 11071061
ALUMINIUM SOCKET FOR DRYWALL VERTICAL PASSAGE KIT 11071062
INLETS
DESCRIPTION REFERENCE
INSTALLATION KIT FOR RETRACTABLE HOSE SYSTEM
11071040 (flexible wall)11071041 (brick wall)
DUST PAN 11070019 (white)11070020 (silver)
UNIVERSAL ADAPTER 11070061
NEO HARD-WIRED WHITE INLET 11071111
NEO WIRED ALUMINIUM INLET 11071115
NEO CONTACTLESS WHITE INLET 11071110
NEO CONTACTLESS ALUMINIUM INLET 11071114
FILTRATION
DESCRIPTION REFERENCE
C.POWER AIR EXHAUST KIT 11071087
C.AXPIR DISCHARGE BOX 11071172
C.AXPIR DISCHARGE FILTERS 11071173
C.INTEGRA DISCHARGE BOX 11071174
C.INTEGRA DISCHARGE FILTER 11071175
C.COMPACT HEPA FILTER 31000004
C.POWER, C.CLEANER, C.DYVAC 30 L SPARE FILTER BAG 11070084
C.COMPACT 30 L SPARE FILTER BAG 31000003
FIXING KIT FOR C.AXPIR DUSTBAG 11071170
SET OF 3 C.AXPIR DUSTBAGS 11071171
SET OF 5 C.INTEGRA DUSTBAGS 11071176
CLEANING ACCESSORIES
DESCRIPTION REFERENCE
LIQUIDS SUCTION KIT 11070085
CAR SET 11071091
EXTENSION HOSE 11070079
Aspi-Net CLOTHS 11091079
To find out more about our central vacuum cleaning solutions,contact your Aldes sales advisor or visit aldes.com,
or find us on
Gam
me_
Aspi
ratio
n_Co
m_C
orp_
EN_1
02/
2019
- R
CS L
yon
956
506
828
- Ald
es re
serv
es th
e rig
ht to
mod
ify it
s pr
oduc
ts a
t any
tim
e to
intro
duce
new
tech
nolo
gies
. - P
hoto
cre
dits
: Ald
es, G
etty
Imag
es