Simoneau Presentation

SIMONEAU’S HISTORY

• 1984: Establishment of a maintenance/repair company.

• 1992: Boilermaking Manufacturer’s Licence.

• 1994: Construction of a 44,000 s.f. plant.

• 1999: Simoneau designs and supplies boilers in association with

Thermodesign.

• 2013: Acquisition of Servitech Energy, a well established service

company in Quebec.

• To date Simoneau has shipped world wide over 300 CUSTOM MADE and

REFURBISHED boilers.

• 150 full time employees.

• Capacity of up to 200 000 hours of work.

SIMONEAU INTEGRATED OFFER

⦿ Engineering/Design ⦿ Manufacturing ⦿ Installation ⦿ Distribution/Spare Parts ⦿ Maintenance ⦿ Refurbishment & Upgrades ⦿ Training Center

PLANT CARACTERISTICS⦿ 30 tons of lifting capability ⦿ 23 foot clearance under the crane hooks ⦿ 12 full size doors ⦿ 44,000 s.f. plant ⦿ Plate rolling capacity up to ½’’ ⦿ Welding: any plate thickness ⦿ Plate bending capability = ⅜’’ thick x 10’ long ⦿ Tube bending: up to 2 ½’’ in diameter x 50’ long ⦿ 2 bending machines ⦿ Longitudinal fin welder up to 24’ long ⦿ Plasma cutting table, 20’ x 10’ ⦿ X-rays and stress relief are subcontracted ⦿ ASME Quality Control System ⦿ Important boiler tubes and pipes inventory

LABOR FORCE SKILLS

⦿ Assemblers ⦿ Welders ⦿ Pipe fitters ⦿ Boilermakers ⦿ Engineers ⦿ Project Managers ⦿ Administration ⦿ Quality Control ⦿ Combustion Technician ⦿ Start up & Commissioning Technician

PLANT IS ASME CERTIFIED

CERTIFICATION

• ASME/ National Board • Sect. I – « S » Stamp • Sect. IV – « H » Stamp • Sect. VIII, div. 1 – « U » Stamp • « R » Stamp

QUALITY CONTROL

Certified by:

• National Board of Boiler and Pressure Vessel

• American Society of Mechanical Engineers (ASME)

• Canadian Welding Bureau and the TEMA Standards.

Simoneau meets all applicable jurisdiction standards

• ASME, National Board (US), B31.1, B31.3 (US Piping)

• B51 (CDN)

SERVICES OFFERING AND PRODUCT LINE

Provides design and engineering services:

• Custom design of new installations or replacement.

• Existing boilers performance analysis.

• Boiler design upgrades for increased performances.

• Thermodesign represents more than 150 years of combined experience in boiler design.

THERMODESIGN

AQT SERIES

AQT (Flex-tube, Watertube Boilers)

• 20 HP to 70,000 PPH of high & low pressure steam

➢ Saturated or superheated steam

• AQT is provided with integrated finned tube economizer

➢ Provides 85% combustion efficiency burning natural gas

• AQT provides advantages over packaged firetube boilers

• AQT provides an excellent alternative to “D” Type Boilers

AQT Watertube Boiler High pressure Steam with Integrated Economizer,

provides 85% Combustion Efficiency burning natural gas

High efficiency Boiler High pressure steam up to 650 psig

Integrated Economizer

AQT Advantages • Staggered tubes for maximum heat transfer • Rear water wall – no refractory • Tubes expanded and flared in steam drum • Manway in steam drum • Pipe sized downcomers • Natural water circulation – no pumps needed • Provide structural supports • Boiler can be laid on either side • Integrated finned tube economizer

➢ Providing 85% efficiency ➢ Becomes 3 – pass boiler with economizer

• Ease of tube replacement ➢ 3’ to 5’ either side

• Smaller foot-print than firetube

High efficiency Boiler 600 HP, High pressure Steam c/w Integrated

economizerWater Inlet

To Economizer

Feed Water Inlet to Control Valve

Simoneau HTHW Generator “The next generation in producing high temperature, high

pressure hot water”

• Design Features

• Capacities up to 75 mmbtu/hr

• Design pressures up to 500 psig

• Temperatures up to 400 °F

• Delta T to 150 °F

• 2-pass flue gas contact with staggered tube arrangement for maximum heat transfer

• Balanced heat transfer to prevent thermal shock, steaming and hot spots

• Optional integrated finned tube economizer available on most capacities

Simoneau HTHW Generator 10 mmbtu/hr, installed in USA at USI

Large Capacity Watertube Boilers

• 20,000 PPH to 250,000 PPH

• Saturated or superheated steam

• “D” type – Long history and dependable performances

• “A” type – Provides more “over-the-road” transportability

• Waste Heat Recovery Boilers – designed per application

D-TYPE SERIES

Boiler pressure parts being assembled in our plant

D-TYPE 40,000 PPH

D-Type field erected boilers Capacity: 132 tons/hr

300,000 PPH of superheated steam Mud drum

A-TYPE SERIES

“A”-Type Boiler 80 tons/hr

Superheated steam

Open bottom A–Type , 100,000 PPH

for wood-fired combustion

Superheater being installed in the boiler

4 x 80 Tons A-Type Boilers

We provide detailed P & ID Drawings with Operating/Instruction Manuals for all Equipment

Simoneau designs & manufactures deaerators to provide quality feed

water for watertube boilers

Deaerators Designed up to 350,000 PPH capacity

Spray Valves with Tray Design

Bell type deaerator Deaerating capacity of

95,000 PPH

Deaerators designed up to 20,000 PPH with “spray

valves”, without external bell

350,000 PPH deaerator trial fit

Complete “Power Island” Capability

Design, Engineering and manufacturing of ASME

Equipment

ALGERIAPOWER ISLAND

Design, Engineering and Manufacturing of ASME Equipment

AQT 1500 BD 48’’ x 60’’

THANK YOU!