Post on 19-Sep-2020
WORKSHOP CATALOGUEEngineered to last
SHINN FU EUROPE B.V.www.shinnfu.comOfficial Sponsors of United Autosports
2
WARRANTY CONDITIONS For OMEGA and PRO LIFT BRAND LIFT EQUIPMENTAll Shinn Fu products are carefully supervised throughout the manufacturing process. Before sending the products to the customers, every article is checked for material and manufacturing defects. The high quality and reliability of our products is what characterizes our brands.
Shinn Fu’s products are warranted against defects in material and workmanship for a period of two (2) years for both OMEGA and PRO LIFT (from the date of purchase).
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair, replace or credit (at its option) the product without charge.
Warranty assessment: In case of defective articles the customers have to contact a Shinn Fu Europe B.V. dealer for further instructions.
WARRANTY CONDITIONS For OMEGA-MECHANIX brand productsShinn Fu’s products are warranted (for the expected life of the products) against defects in material and workmanship.
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair or replace (at its option) the product without charge.
Disclaimers and Limitations:This LIMITED WARRANTY does not extend to products manufactured by SHINN FU that in its sole judgment were improperly used, altered, abused or repaired by others.
• Ten (10) years limited warranty for OMEGA-MECHANIX hand tools with exception of shank bits, bit sockets, ratchet handles, torque-sockets, torque-wrenches, air impact wrench and electrical impact wrench.
• Two (2) years limited warranty for OMEGA-MECHANIX ratchet handles, torque-sockets, torque-wrenches and air impact wrenches.
• One (1) year limited warranty on all OMEGA-MECHANIX products that are equipped with a battery or 230V power lead.• No warranty on shank bits and socket bits, or wear items like creeper wheels.
Shinn Fu is not liable for incidental or consequential costs or losses incurred by product purchaser or user.
Warranty Assessment: In case of defective articles the customers have to contact their Shinn Fu Europe B.V. dealer for further instructions.The product price is in consideration of limiting Shinn Fu’s liability for products manufactured or distributed.
WARNING!Familiarize yourself carefully with these products before using. Know the hazards associated with their improper use. Never use
3
SHINN FU Under the direction and leadership of the founder Mr. Michael Hung, and the hard work and devotion of their employees,
Shinn Fu Corporation was founded by Mr. Michael Hung in 1971 (based Chia-yi, Taiwan). Shinn Fu’s vision is one of continuous growth and prosperity. Their goal is to generate strong growth and new levels of achievement, and to continue to make the
The insistence of producing and offering only the highest quality products has earned Shinn Fu Group a reputation for exceptional quality in the automotive lifting equipment, hydraulic equipment, and automotive accessories with strong brands in the professional market and invaluable recognition for reliability in the DIY market. The quality of Shinn Fu's products is recognized not only by customers worldwide, but also by international governments and industry agencies including the American National Standards Institute (ANSI), Australian Standards (AS), European Conformity (CE), Germany's Technical Inspection Association (TUV) and Japanese Industrial Standards (JIS). Every Shinn Fu product is
Shinn Fu’s commitment to quality permeates all aspects of the organization, and it is aggressively assimilating the International Quality Assurance System into its production fold. Currently Shinn Fu has three plants that are ISO9001, ISO14000 and QS9000 compliant, and a mechanical jack manufacturing plant that conforms to rigorous automotive industry Quality Assurance (QA) standards. All other facilities in the Shinn Fu Group have initiated programs to reach compliance in the near future in order to pro-gress toward Shinn Fu's goal of total quality system compliance. Shinn Fu is committed to continuous upgrades all of its facilities to ensure that they remain state-of-the-art.
Shinn Fu possesses a valuable, substantial and global patent portfolio that covers many important inventions in hydraulics, lifting, and automotive accessories. Shinn Fu is also devoted to supplying safe user-friendly product lines.
USA, Canada, Australia, Hong Kong, Japan and Europe. This global presence facilitates the establishment of strong customer relationships and allows Shinn Fu to provide more effective customer assistance. Shinn Fu Europe BV (SFE) was established in 1994 in The Netherlands. With the objective of promoting and distributing Shinn Fu's products in the markets of Europe, Middle East and Northern Africa, SFE launched the Omega Lifting Equipment program beginning in 1994. Since then, Omega has won the market's recognition.SFE maintains the following divisions:
• BVA Hydraulics™• Omega Lift Equipment®• Omega Mechanix™• Pro-Lift®
Pro
fess
iona
l lift
ing
equi
pmen
t
5
Index
Hydraulic bottle jacks Page 8
Specifications Page 9
Hydraulic service jacks Page 10 - 12
High lift Page 13
Specifications Page 14 - 15
Hydraulic service jacks Page 16 - 17
Specifications Page 18
Air actuated axle jacks Page 19 - 23
Specifications Page 24 - 25
Stabilisation Products Page 26 - 27
Jack stands Page 28
Axle stands & high stands Page 29
Specifications stands Page 30
Hydraulic pit jack Page 31
Transmission jacks Page 32 - 33
Specifications Page 33
Body repair kits Page 34
Engine cranes Page 35 - 36
Specifications Page 37
Engine stands & supports + specs. Page 38 - 39
Presses + specs. Page 40 - 41
Bench & shop presses + specs. Page 42 - 43
Wheel arm & pipe bender Page 44
Car dolly + Tyre handling equipment Page 45 - 47
Pumps & cylinders + specs. Page 48 - 49
6
Handle
Round-Shape handle
Magic Lift
• Magic Lift for fast and time-saving operation.• Reaches the lifting point with only one stroke.
Handle
T-Shape handle
Handle
With Air Return
Handle
With Air Return
Handle
7
5. Gear Type
Traditional and proven transmission.
2. Saddle pad
Patented airvented soft saddle pad prevents vehicles chassis against scratching.
3.3. Full cover Saddle pad
Patented airvented soft saddle pad prevents vehicles chassis against scratching.
1. Soft Handle Foam
Soft Foam for extra protection. Prevents handle from accidentally damaging the car.
9. Metal Wheels
Metal wheels, long lasting and strong.
6. Air Vent Valve or Oil Filler Plug
Exclusive designed breather plug automati-cally eliminates air in the hydraulic system, optimizing jack's performance.
4. Universal Joint Mechanism
Universal joint release mechanism provides precision control of load descent in any handle position.
Air Vent Valve or Oil Filler Plug
SoftHandle Foam
GearType
MetalWheels
NylonWheels
PU-Wheels
Universal Joint
8. Nylon Wheels
Nylon wheels for easy and silent moving
7. PU-Wheels
PU-Wheels for easy and silent moving
General Features
1. 2. 3. 4. 5. 6. 7. 8. 9.
8
Hydraulic bottle jacks >Model: 1102500 - 1104500 - 1106500 - 1108500 - 1112500 - 1112900
1120500 - 1120900 - 10500 - 10990
• With easy adjustable extension screw [2-20 Ton].• With rubber removable carry ring for easy storage of pump handle [2-20 Ton].• Safety valve against over-loading.• Bottle Jacks 8 Ton and more are supplied with a carry grip.
< Air actuated bottle jacksModel: 1820200 - 1730200 - 1820600 - 1850200
• 8 - 12 BAR suggested air pressure for optimal performance.
Telescopic bottle jacks >Model: 1202100 - 1204100
• Telescopic ram plunger combines a compact construction with a long hydraulic stroke.
Hydraulic bottle jacksHeavy duty
< Hydraulic welded bottle jacksModel: 1412000 - 1420000 - 1430000
• With easy adjustable extension screw.• Safety valve against over-loading.• Bottle Jacks are supplied with a carry grip.
9
D
C
A
B
E
W
FL
D
C2
C1C
B
A
E
W
LF
1412000 1420000 1430000 1202100 1204100 1820200 1820600 1730200 185020012 ton 20 ton 30 ton 2 ton 4 ton 20 ton 20 ton 30 ton 50 ton
ModelCapacity
A (mm)B (mm)C (mm)
C1 (mm)C2 (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
241469150
--
7845242
1381068
8.254
0.0272000
249475150
--
7645276
16015012.5132
0.0181200
268480155
--
5769567
19015220
20.81
0.014800
170375205103102
-34528110122
4246
0.0314554
17341820110410635
44532
1301205.4
23.14
0.0242980
247477130
--
10060048
21618417.017.9
10.0171005
24547880--
15360052
23017317.618.4
10.017976
280458180
---
9656226021027.528.5
10.031632
305483178
---
60079
28018758.463.3
10.0395
284
- Telescopic
1102500 1104500 1106500 1108500 1112500 1112900 1120500 1120900 10500 10990
2 ton 4 ton 6 ton 8 ton 12 ton 12 ton 20 ton 20 ton 50 ton 100 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1843491105534025100983.012.8
40.0135600
20839312560
44827
1091004.0
17.34
0.0193900
22143413380
448311181055.0
21.94
0.0193300
23145115070
46034
1201226.2
24.94
0.0252900
24047015080
46043
1401308.0
33.54
0.0292100
1572747740
46043
1641546.3
26.04
0.0292668
24447415080
46052
13813012.526.1
20.0201300
1692867740
46052
1641509.6
20.52
0.0141766
305483178
-59379
27519850.454.9
10.034328
305461156
-60011330523890.697.2
10.044185
Heavy duty
- Air Actuated
Specifications
Heavy duty - Welded
10
2902401 >
Capacity: 2.25 TonMax: 495mmMin: 135mm
Extra wide wheels and solid stance designed for stability under load stress.
Hydraulic Service JacksGear Type & Universal joint
SoftHandle Foam
GearType
PU-Wheels
PU-Wheels
SoftHandle Foam
SoftHandle Foam
GearType
GearType
PU-Wheels
Air Vent Valve or Oil Filler Plug
31,5KG
SoftHandle Foam
Universal Joint
Air Vent Valve or Oil Filler Plug
PU-Wheels
< 2103001
Capacity: 3 TonMax: 494mmMin: 140mm
Equipped with traditional handle and convenient foot pedal.
2903501 >
Capacity: 3.2 TonMax: 504mmMin: 145mm
Extra wide wheels and solid stance designed for stability under load stress.
< 2903101
Capacity: 3 TonMax: 460mmMin: 120mm
Universal joint mechanism.
11
Hydraulic Service JacksUniversal joint
2903011 >
Capacity: 3.5 TonMax: 533mmMin: 100mm
Universal joint mechanism.
< 2903701
Capacity: 3.2 TonMax: 558mmMin: 140mm
Universal joint mechanism.
SoftHandle Foam
2702701 >
Capacity: 2.7 TonMax: 480mmMin: 100mm
Aluminum frame with steel lifting arm.
SoftHandle Foam
PU-Wheels
SoftHandle Foam
Universal Joint
Air Vent Valve or Oil Filler Plug
PU-Wheels
SoftHandle Foam
Universal Joint
Air Vent Valve or Oil Filler Plug
PU-Wheels
PU-Wheels
Universal Joint
Universal Joint
26KG
31KG
< 2602701
Capacity: 2.7 TonMax: 485mmMin: 103mm
Full aluminum jack.
12
Hydraulic service jacksLow profile universal joint
2902301 >Only 63mm high / Extra long reach
Capacity: 2 TonMax: 508mmMin: 63mm
2902501 >High lifting range 63 - 500mm
Capacity: 2.25 TonMax: 500mmMin: 63mm
SoftHandle Foam
SoftHandle Foam
Universal Joint
Universal Joint
PU-Wheels
PU-Wheels
PU-Wheels
Air Vent Valve or Oil Filler Plug
Air Vent Valve or Oil Filler Plug
Air Vent Valve or Oil Filler Plug
2102701 >Long reach
Capacity: 2 TonMax: 375mmMin: 80mm
SoftHandle Foam
Universal Joint
Length 600mm
Length 710mm
2903201 >High lifting range 85 - 500mm
Capacity: 3 TonMax: 500mmMin: 85mm
SoftHandle Foam
Universal Joint
PU-Wheels
Air Vent Valve or Oil Filler Plug
13
< 28045Forklift jack
Capacity: 4 TonMax: 435mmMin: 55mm
Capacity: 5 TonMax: 765mmMin: 430mm
• Dual lift points for servicing forklift trucks, vehicles or machinery with low or high ground clearance.
High liftUniversal joint
2501503 >T-Shape handle
Capacity: 1,5 TonMax: 815mmMin: 100mm
SoftHandle Foam
Universal Joint
NylonWheels
Air Vent Valve or Oil Filler Plug
Optional 32075
Capacity: 7 Ton
4 Ton
5 Ton
T-Shape Handle
14
2902401 2602701 2702701 2103001 2903101 2903501 2903701
2 ton 2.7 ton 2.7 ton 3 ton 3 ton 3.2 ton 3.2 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or
Wheels
135495360
10701007643
63633516531,533.0
10.043620
x
-
-
PU
103485382
12101006555
73033216026
2711
0.056500
x
-
-
PU
100480380
12101006555
70533216031
32,61
0.053500
x
-
-
PU
140494354
10701259258
69734116037.639.0
10.064440
x
-
x
PU
120460
-11501107643
67833416132.334.3
10.043500
x
x
x
PU
145504359
10701257658
69033616037.238.5
10.062445
x
-
x
PU
1405584181320125924375835116539.842.8
10.066420
x
x
x
PU
Hydraulic service jacks
Air Vent Valve or Oil Filler Plug
MetalWheels
Universal Joint
A
F
I J
H
W
L
BC E
Specifications
15
2903011 2102701 2902301 2902501 2903201 2501503 28045
3.5 ton 2 ton 2 ton 2.25 ton 3 ton 1.5 Ton 4 Ton
100533433
1320110854073834416138.9411
0.059480
x
x
x
PU
80375295
13201257258
95534917044.348.5
10.094306
x
x
x
PU
63508445
13201256058
107834917552.554.9
10.107270
x
x
x
PU
63500437
13201256043
76234514539.541.5
10.064456
x
x
x
PU
85500415
13201107240
69234415838391
0.057500
x
x
x
PU
100815 715
13421409258
102938517052
56.51
0.090286
x
x
x
Nylon
55435430765750751005075525538.541.3
10.070348
-
-
-
Metal
Low profileservice jacks High lift Forklift
E
B
D
W
C
I
G
A
4 Ton▼
5 Ton▼
5 Ton▼
4 Ton▼
J
L
Specifications
16
Hydraulic service jacksLong chassis
2505700 >
Capacity: 5 TonMax: 565mmMin: 165mm
Universal Joint
Air Vent Valve or Oil Filler Plug
Round-Shape Handle
< 2510700
Capacity: 10 TonMax: 686mmMin: 175mm
Universal Joint
Air Vent Valve or Oil Filler Plug
Round-Shape Handle
MetalWheels
MetalWheels
17
Hydraulic service jacksLong chassis - air operated
22201 >
Capacity: 20 TonMax: 660mmMin: 190mm
• 8-14 BAR suggested air pressure for optimal performance.• 3-Ways to operate: by air, manually and with
foot pedal.
Universal Joint
MetalWheels
Air Vent Valve or Oil Filler Plug
22101C >
Capacity: 10 TonMax: 686mmMin: 178mm
Universal Joint
MetalWheels
Air Vent Valve or Oil Filler Plug
T-Shape Handle
18
2505700 2510700 22201 22101C
5 ton 10 ton 20 ton 10 tonModel
Capacity
A (mm)B (mm)
Stroke (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or
Wheels
165565400
106816711070
133842828185.591.5
10.144200
x
x
x
Metal
175686511
1215167130100
1309499245
130.0140.0
10.253
90
x
x
x
Metal
178686508
1069188150100
1390507324163
200.01
0.36860
x
x
x
Metal
190660470
1346155150100
1580517300220
259.11
0.46150
x
x
x
Metal
Hydraulic Service Jacks
Air Vent Valve or Oil Filler Plug
MetalWheels
Universal Joint
A
F
I J
H
W
L
BC E
Specifications
19
Adaptors
75mm 45mm
Air actuated axle jacks• • Easy access between wheels of tandem axle trucks.• 8-12 BAR suggested air pressure for optimal
performance.• Extension adaptors included.
Air actuated axle jacksTelescopic - Air Return
24KG
23152 >
Capacity: 15 / 30 Ton Max with adaptor: 409mmMax without adaptor: 289mmMin: 150mm
20
Adaptors
120mm 75mm 45mm 30mm
Air actuated axle jacksTelescopic - Air return
23212 >2 stage
Capacity: 20 / 40 TonMax with adaptor: 559mmMax without adaptor: 289mmMin: 150mm
With air return handle
21
Adaptors
120mm 75mm 45mm 30mm
Adaptors
120mm 75mm 45mm 30mm
Air actuated axle jacksTelescopic - Air return
< 242133 stage
Capacity: 20 / 40 / 60 TonMax with adaptor: 597mmMax without adaptor: 327mmMin: 150mm
With air return handle
24113 >
Capacity: 10 / 20 / 40 TonMax with adaptor: 559mmMax without adaptor: 289mmMin: 130mm
With air return handle
22
Adaptors
10mm 70mm 120mm
Adaptors
20mm 50mm 100mm
Air actuated axle jacksShort chassis
with air return
With extension
screw
With extension
screw
< 23211
Capacity: 20 TonMax with adaptor: 541mmMax without adaptor: 441mmMin: 215mm
23207 Telescopic >
Capacity: 20 / 35 TonMax with adaptor: 454mmMax without adaptor: 334mmMin: 186mm
23205 >
Capacity: 20 TonMax with adaptor: 495mmMax without adaptor: 395mmMin: 260mm
With extension screw (see dimension D in table)
23
Adaptors
45mm 100mm
100mm 200mm
Air actuated axle jacksHigh tonnage
< High tonnage - Short chassisModel: 23301C - 23501 - 23991Capacity: 30 ton - 50 ton - 100 ton
•
tandem axle vehicle.• User friendly, self-returning spring minimizes
operator's effort, greatly reducing fatigue.•
air motor for longer life.• 8-14 BAR suggested air pressure for optimal
performance.
< Air actuated axle jacksModel: 24301 - 24601
24301Capacity: 30 TonMax with adaptor: 772mmMax without adaptor: 627mmMin: 360mm
24601Capacity: 60 TonMax with adaptor: 1031mmMax without adaptor: 731mmMin: 420mm
24
23152 23212 24213 24113 24301/24601
15/30 ton 20/40 ton 20/40/60 ton 10/20/40 ton 30 / 60 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)C1 (mm)C2 (mm)C3 (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)H (mm)
Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1502891397366-
17670654902905007545--
24301
0.065420
1502891397366N/A18670
160480290143012075453047511
0.11254
15032717757596121570150875295
151012075453076811
0.17175
130289159574953
17970
125830295151012075453050561
0.17175
360 / 420627 / 731267 / 311
---
215 / 29570 / 90
200 / 200840 / 910282 / 362
1380 / 1380100 / 20045 / 100
--
87 / 126101 / 143
1 / 10.139 / 0.18
145 / 118
Telescopic - air return
H
F
A
C
L
B
E
WD
C1
C2C3
Specifications
25
23205 23211 23207 23301C 23501 23991
20 Ton 20 Ton 20/35 Ton 30 Ton 50 Ton 100 TonModel
Capacity
A (mm)B (mm)
A-B (mm) Stroke C (mm)
D (mm)E (mm)F (mm)L (mm)
W (mm)H (mm)
Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
26049523513510071
200547315
1229----
33.435.4
10.091290
2154412261418543
165525265
12401005020-
30351
0.083320
186334148148
-70
204549351
12291207010-
49.553.2
10.083325
280458
-178
-62
200547317
1229----
43.545.6
10.081255
305483
-178
-79
204549351
1229----
72.383.0
10.119216
305461
-156
-1132545864161258
----
112.5123.3
10.139145
Short Chassis High Tonnage - Short Chassis
B
A
L
C
D
E
F
W
H
Specifications
26
SB001B SB001Y SB002B SB002Y
35 ton
50 ton
35 ton
50 ton
100 ton
150 ton
100 ton
150 ton
ModelCapacity
ColorDimension (mm)
Weight (kg)
Black457(A) x 90(B) 105(C) x 80(D)
3.2
Yellow457(A) x 90(B) 105(C) x 80(D)
3.2
Black610(A) x 152(B) 178(C) x 150(D)
11.3
Yellow610(A) x 152(B) 178(C) x 150(D)
11.3
Stabilisation Blocks
1105
4345
7585
10825
1175
4625
71075
101525
LayerHeight (mm)
SW001B SW002BModel
ColorDimension (mm)
Weight (kg)
Black490 x 90 x 90
1.8
Black610 x 130 x 145
5.5
Wedge for SB001 or SB002
< SB001B & SB001YStabilisation block
• The stabilisation blocks are designed to provide superior crib stability compared to standard products.
• Unlike wooden products, the stabilisation blocks do not splinter or
• Lightweight and easy to handle, with anti-slip layers.• Instead of snapping, cracking or collapsing it gradually deforms providing
a visual warning of overload.
Stabilisation blocks
In this photo, we see SB002B blocks set up for a 2 stage crib application. Stabilisation blocks are designed according to a system of interlocking blocks. In this photo, we see SB002B blocks set up for a 3 stage crib application.
Interlocking
Cribbing Options
Height of the stability tower is limited to
2 Stage 3 Stage
27
Support pads
SP44410 SP55415 SP66420 SP66625 SP1010650
10 ton 15 ton 20 ton 25 ton 50 tonModel
Capacity
GripDimension (mm)
Weight (kg)
1400 x 400 x 40
6
1500 x 500 x 40
9
1600 x 600 x 40
14
1600 x 600 x 60
20
21000 x 1000 x 60
58
Support Pads
Other sizes/capacities available on request.
SP44410 >Support pad
• The support pads are outrigger pads used for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, containers, hydraulic jacks etc.
• Its purpose is to spread the weight over a larger surface offering better support while also protecting the surface.
Support Pads >
• Ecological.• Light weight.• Easy to handle.• High durability.•• Water-repellent.• Nearly unbreakable.• No rusting. • No rotting.
28
Jack standsTubing & Ratchet
< Jack stands ratchetModel: 3203500 | 3 Ton | Max 432mm / Min 292mm 3206500 | 6 Ton | Max 618mm / Min 390mm 3212500 | 12 Ton | Max 700mm / Min 445mm
• One piece, FCD-40 ductile iron ratchet bar provides super strength and durability.
• Quick adjustment ratchet mechanism.
Sold and to be used only in pairs!
Jack stands tubing >Model: 3203100 | 3 Ton | Max 433mm / Min 290mm 3206100 | 6 Ton | Max 565mm / Min 365mm 3212100 | 12 Ton | Max 750mm / Min 485mm 3220100 | 20 Ton | Max 923mm / Min 568mm
• Adjustable in various heights.• Chained lock pin to secure ratchet column.
Sold and to be used only in pairs!
3 & 6 Ton with rubber pad
29
Axle stands & High standsHeavy Duty
3207500 >Capacity: 7 Ton | Max 360mm / Min 238.5mm
• Special for forklift trucks.
Sold and to be used only in pairs!
< 3222500Capacity: 22 Ton | Max 505mm / Min 310mm
Sold and to be used only in pairs!
< 3210901Capacity: 10 Ton | Max 1194mm / Min 711mm
Sold and to be used only in pairs!
3203900 >Capacity: 3 Ton | Max 2000mm / Min 1300mm
Sold per piece!
with rubber pad
30
L
JIB
D C
A W
I
B
INTE
RVA
L
D
J
L
C
A
3203100 3206100 3212100 3220100 3203500 3206500 3212500
3 ton 6 ton 12 ton 20 ton 3 ton 6 ton 12 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)I (mm)J (mm)L (mm)
W (mm)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
294437143296075
121-
5.25.51
0.0201343
375575200408080
339-
10.612.0
10.047600
481752265539090
389-
23.525.5
10.073336
568923355798090
524-
34.438.5
10.169172
292432140152790
1901706.06.41
0.0161760
390618228183111027023513.714.5
10.038708
445700255233712030727424.525.8
10.063415
Tubing Ratchet
L
FEB
DC
A
3207500 3222500 3203900 3210901
7 ton 22 ton 3 ton 10 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
238.5360
121.5556490-
220--
9.611.1
10.0231152
310505195557080-
250--
27.828.8
10.034832
130020007005080110
-837
--
21.924.3
10.059429
71111944835080
125-
407--
50.054.2
10.228120
Heavy Duty
Specifications
31
Hydraulic pit jackMagic lift
< Pit jackModel: 46030 | 300 kg | Max 2105mm / Min 1280mm 46060 | 600 kg | Max 2097mm / Min 1267mm 46100 | 1000 kg | Max 2146mm / Min 1316mm
• Magic lift hydraulic unit reaches the desired height twice as fast as traditional models without magic lift.
• By turning the saddle upside down, it can also be used as extra support.
Reversible
SaddleArt. 21030-04
Saddle padArt. 2903509100
Transmission Saddle41901 (Optional for the 46100)
Transmission SaddleS0501T (Optional for the 46030)
46030 46060 46100
300 kg 600 kg 1000 kgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1280210582510090076
435575600
105231.034.1
10.0971
270
1267209783010087376
435575600
102836.339.4
10.0971
270
13162146830100931125435720640
108643.949.4
10.103210
Magic lift
GD
C
AEH
F
B
L
W
Supporting DeviceM9409 (Optional) See Page 105 for more content
32
< 41000CModel: 41000C - Manual 41001 - Air OperatedCapacity: 500 kg | max 2026mm / min 1016mm
• Effortless air operation will greatly reduce operator's
• 8-14 BAR suggested air pressure for optimal perfor-mance.
42001 >Single stage air operatedCapacity: 1000 kg | max 2163mm / min 1433mm
• Effortless air operation will greatly reduce operator's
• 8-14 BAR suggested air pressure for optimal perfor-mance.
Transmission jacksHeavy duty
< 4200000Model: 41100C | 500 kg | max 630mm / min 343mm 4200000 | 1000 kg | max 850mm /min 320mm
• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment of
transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing casters.• Multi-adjustment knobs ensure that transmission cradle is
always at the right angle to position and accept any load.
33
Transmission jacksHeavy duty
< 43000Capacity: 1500 kg | max 1195mm / min 450mm
• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment
of transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing
casters.• Multi-adjustment knobs ensure that transmission cradle
is always at the right angle to position and accept any load.
41000C 41001 42001 41100C 4200000 43000
500 kg 500 kg 1000 kg 500 kg 1000 kg 1500 kgModel
Capacity
A (mm)B (mm)C (mm)
C1 (mm)C2 (mm)D (mm)E (mm)F (mm) G (mm)L (mm)
W (mm)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
10162026101049052055354779
84090373.581.8
10.175170
1016202610104905205535477984090381.589.8
10.175170
14332163730
--
19845-
10010021069130.0143.8
10.246
85
343630400
--
114570
-58
79038043.048.2
10.105224
320850650
--
120570
-73
103848584.891.0
10.130184
4501195745
--
250740
-1001188650
133.5147.8
10.231104
Heavy duty
C1
C2 E
F
C
B
D
G W
L
Z
A E
L G
D
CB
W
A
34
< 50040 Capacity: 4 Ton
• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading
and pressing of vehicle body panels as well as various component parts and assemblies.
50100 >Capacity: 10 Ton
• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading
and pressing of vehicle body panels as well as various component parts and assemblies.
• Handy tubing storage compartment design.• With wheels.
Flat base
Plunger toe
Rubber head
Combi head
Ram toe
Serrated saddle
Wedged head Hose
Male connector Spreader
Body Repair KitsHeavy Duty
Model 50040 495mm420mm215mm155mm75mm
Model 50100 685mm 455mm 255mm105mm
Length extension bars:
35
Engine cranes Foldable
< 44017Model: 44017 - 44018Capacity: 1000 kg
• 44017 with MagicLift hydraulic unit.• 44017 + 44018, operating handle with 270 degrees
swiveling angle.• HTR (Hold-To-Run) mechanism.
PU-Wheels
270°
44012 > Capacity: 1000 kg
• Foldable cranes.• Unique folding design for easy, fast and compact storage.• HTR (Hold-To-Run) mechanism, designed to assure user's
maximum safety when the valve is released.
< 90150Equilizer (Optional)Capacity: 680 kg
Equalizer optional 90150
36
Engine cranes
< 44020 Capacity: 2000 kg
• Hard chrome plated piston rod.• Built in safety overload valve.• Retractable front legs and lifting boom for easy
storage.
Hydraulic long jack >Models: 44943 - 44947 - 44949 - 44980
• Polished ram plunger and cylinder protect seals from abrasion.• Built-in safety overload valve.
44943 44947 44949 44980
4 Ton 4 Ton 4 Ton 8 TonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
6121120508113775030
16.016513062812.728.2
20.060972
6051113508113050030
16.01301146229.9
20.82
0.0301360
6121120508113750030
16.016513062811.425.0
20.0501056
6001085485109950035
18.012812061413.528.3
20.0431226
Hydraulic long jack
where indicated
< 90150Equilizer (Optional)Capacity: 680 kg
G
CF
A HD
E
B
W
L
37
44012 44017 44018 44020
1 ton 1 ton 1 ton 2 tonModel
Capacity
A (mm)B (mm)F (mm)L (mm)
M (mm)N (mm)
O (mm)N.W. (kg)G.W. (kg)
Pieces CartonWheels
Lifting Arm PositionOperating Swivel
HandleHTR (hold to run)
Magic Lift
Lock position of extension boom
CapacityMinimum hook
height (mm)Maximum hook
height (mm)Boom Length (mm)
13301540450845100038012573.080.0
1Metal
4
-
YesNo
146015255701060120035010084.094.0
1PU5
270°
YesYes
146015255701060120035010083.490.6
1PU5
270°
YesNo
139423051725735860
135089
105.0110.5
1Pc = 2CartonMetal
4
-
YesNo
P1
1000
280
2070
710
P2
850
200
2140
795
P3
700
125
2205
870
P4
550
50
2280
950
P1
1000
439
1978
620
P2
900
341
2021
720
P3
800
243
2075
820
P4
700
145
2131
920
P5
600
0
2170
1020
P1
2000
465
1760
1238
P2
1500
355
1910
1465
P3
1000
235
2065
1692
P4
500
127
2200
1919
Foldable Heavy Duty
O
A
B ML
N
F
Boom Length
Max. HookHeight Min.
Hook Height
44012 44017 & 44018 44020
Specifications
38
Engine Stands & SupportsHeavy Duty
31000 >Engine standCapacity: 500 kg
• Head plate locks in 8 positions and rotates 360°.
90068 ^ 1 spindle Capacity: 300 kg
• Feet and spindles are adjustable over the whole length of the support.
90165 v 2 spindles Capacity: 500 kg
NEW
Ball bearing makes turning the spindle easier
39
C
B EA D
A
1
2
3
D
B
C
AD
B
C
31000 90068 90165
500 kg 300 kg 500 kgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)
Saddle BaseMin. Claw AreaMax. Claw Area
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
8088008787589
250x150292x122402x152
23.025.4
10.043700
1500205310243
----
12.513.5
10.0231250
1650205310243
----
16.017.5
10.0271000
Engine Stand Supports
Specifications
40
Presses > Model: 61154 - 61204 - 61304 - 61504Capacity: 15 - 20 - 30 - 50 Ton
• Excellent for bending, bonding or straightening applications.• Multi-position bed for work height adjustment (A-B).• Press bed of 50 Ton press moved by Winch.• Double speed pumps for fast ram moving without load.• Cylinder can be re-positioned in width (M).• Gauge indicates metric Tons.
< 61504Capacity: 50 Ton
Handwinch
PressesHeavy duty
61025 >Punch set
Grid guard >61015 - 61030 - 61050
41
Gauge Arbor plate Manual operation Foot operation
H
A
L W
W1
W2
M
C B61504
61154 61204 61304 61504
15 ton 20 ton 30 ton 50 tonModel
Capacity
StrokeA (mm)B (mm)C (mm)M (mm)L (mm)
W (mm)W1 (mm)W2 (mm) H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
160168980160160540700500
-172791.5118.5
10.299
56
18535
912176176540730510
-17131121391
0.33156
160151
1031200200700795535
-1772166.7202.7
10.404
56
20069
1048245245800
1030730748
1830298
340.61
0.60756
Presses
Specifications
42
< 65124Capacity: 12 Ton
Optional:Gauge adaptor: 60153-50 (GBW1460)Fitting: 434-4-0000-000
60253 >Capacity: 25 Ton
Bench & Shop pressesHeavy duty
43
Bearing punch 60253
W
W
W1
W1 EDH
DL
A
A CC
L
H
F
B
B
W
C
65124 60253
12 ton 25 tonModel
Capacity
StrokeA (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)L (mm)
W (mm)W1 (mm)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
153,5378.5153.633.3175
---
72517555036549.155.7
10.052320
16563.586916580011557
2191495710710510
119.2123.8
20.086156
Presses
Gauge 6025365124 (optional!)
Arbor plate 60253 Gauge adaptor + Fitting65124 (optional!)
Specifications
44
Wheel arm & pipe bender
9210000 >EZ wheel arm
The EZ Wheel Arm is a great accessory to hold tyres on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of various thickness. The bar can be folded up or sideways when not in use to save space.
Supplied in pairs
Adjusts
Vertically
Adjusts
Horizontally
capacity of 45 kgs
< 6615000Pipe BenderCapacity: 15 Ton
• Complete with 8 former attachments for a wide variety of pipe diameters.
• Capable of bending high pressure/temperature tubing as well as standard hydraulic, gas, steel, aluminum and brass from 12.7mm up to 76.2mm with included attachments.
Cilinder capacity: 15 TonRam range: 251mmMax. working pressure: 700 BARProduct size: 770x779x970mmG.W.: 82.8 kg
12.7mm 19.1mm 25.4mm 31.8mm 38.1mm 50.8mm 76.2mm64mm
Min width 79 mmMax width 142 mm
Min height 76 mmMax height 123 mm
W W
H H
45
Car dolly set
47020 >Capacity: 900 kg per dolly
Can support the vehicle in three different ways:- By the wheel- By the pinch weld- By the frame
• No adapters required.• Integrated frame adapters.• Locking casters.• No tools required.• Adapter secured with pins.• Easily stacked for convenient storage.• Sold in pairs of two.
46
Tyre handling equipment
22910 >Bead BreakerCapacity: 5 Ton
• For single rimmed wheels, with a maximum rim size of 25".
• Oil capacity 250cc.
< 47053Wheel DollyCapacity: 680 kg
• Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem and duplex tyres and wheels.
• Adjustable cradle rollers and lifting height.
90250 >Move JackCapacity: 680 kg
• Ideal for manoeuvring cars in shops and showrooms.• Rigid steel frame - 680 kg capacity per jack, 2720 kg capacity
per 4 jacks set.• Handles tyres up to 12" - 305mm wide.• Easy foot pedal operation.
2 jacks: allow full 180° vehicle pivot. place vehicle on 360° rolling platform.
47
BD
C
A
EØ
F
H
G
J
F
K
G
A
BC
I
E
H
D
C
A
J I
H
E
F
GD
L K
47053 90250 47020 22910
680 kg 680 kg 900 kg 5 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)I (mm)J (mm)K (mm)L (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
60922063885
12550858348
10731090883
-68.072.2
10.129144
30534554062510219068
560----
35402
0.134400
352458515187
-38019060101
---
36.2382
280560
397-
131.5735523033020953813810014.016.4
10.0221125
Wheel Dolly Bead BreakerMove Jack
Specifications
Car Dolly
48
Hydraulic hand pumps >Model: 55040 - 55100Capacity: 270cc / 700 BAR - 770cc / 700 BAR
• Built-in safety overload valve.
Hydraulic cylinders >Model: 55109 - 55049Capacity: 10 Ton - 4 Ton
• Internal plunger wipers help seal out dirt and a guide ring is designed to protect against side load damage.
• Industrial hard chrome-plated ram helps to prevent rust and corrosion.
• Maximum working pressure: 700 BAR / 10000psi.
55109Also included in the auto-body repair-kit 50100. (page 34)55049Also included in the auto-body repair-kit 50040. (page 34)
< Air actuated treadle pumpModel: 22903Capacity: 1500cc / 700 BAR
• Built-in safety overload valve.• Durable lightweight aluminum reservoir.• Foot pedal provides hand-free user-friendly operation.
5504955109
< Pull cylindersModel: 71055 - 71105Capacity: 5 Ton - 10 Ton
Pumps & CylindersHeavy duty
49
C B
A
D
G
FE
D
A
C
B
D E
AB
C
F
BA
D
C
F
1 1/4”-NPT1 1/4”-NPT
55040 55100 22903 55049 55109 71055 71105
700 BAR 700 BAR 700 BAR 4 ton 10 ton 5 ton 10 tonModel
Capacity
Oil Capacity (cc)A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)
Weight (kg)N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.Hose Length (mm)
CouplerPressure Rating
(BAR)Output Flow Rate
(cm3 / min)No Load
LoadAir pressure range
(BAR)
270400310147130
----
6.16.61
0.0141980
13x18181/4" NPTF-18
-
--
-
770480500147130
----
7.27.81
0.0201320
13x18181/4" NPTF-18
-
--
-
1500263126
1/4" NPTF-183/8" NPTF-18
1851301368.2-------
700
1075180
7-14
100274397123384425--
1.88.61
0.0018780
--
-
--
-
290348502154586641--
4.95.11
0.0043529
--
-
--
-
10629443514158-
32--
3.88.62
0.0073456
-1/4" NPTF
700
--
-
23629044015070-
32--
5.512.0
20.0083000
-1/4" NPTF
700
--
-
Foot pumpHydraulic pumps Hydraulic cylinders Pull Cylinders
Specifications
50
Lift
ing
equi
pmen
t
51
Index
Bottle jacks Page 52
Floor jacks Page 53
Garage jacks Page 54
Specifications Page 55
Jacks stands Page 56
Lawn mower lift Page 57
Engine crane & body repair kit Page 58
Pit jack Page 59
52
Bottle jacks
• Steel lifting saddle created for load gripping power.• Extension screw adjusts to accommodate work height.• Patented bypass device protects against over-pumping.• Heat treated critical stress areas ensure long life performance.• Meets or exceeds CE & ANSI/PALD standards.• Ideal for auto, truck service, farm and shop use.
B0200 >Bottle Jack - 2 Ton
B0200: 95mm x 95mm x 183mm (LxWxH)Lifting Range: 183-348mm
< B0400Bottle Jack - 4 Ton
B0400: 107mm x 99mm x 204mm (LxWxH)Lifting Range: 204-391mm
B0600 >Bottle Jack - 6 Ton
B0600: 115mm x 102mm x 219mm (LxWxH)Lifting Range: 219-427mm
53
Floor jacks
< F5210Floor jack extra high (SUV) lift - 2.25 Ton
F5210: 719mm x 249mm x 150mm (LxWxH)Lifting Range: 150-533mm
F7670 >
F7670: 560mm x 212mm x 85mm (LxWxH)Lifting Range: 85-373mm
F2000 >Floor jack - 2 Ton
F2000: 504mm x 201mm x 104mm (LxWxH)Lifting Range: 140-356mm
F2000 B >Floor jack in blow mold case - 2 Ton
54
Garage jacks
< G3003Garage Jack - 3 Ton
G3003: 680mm x 334mm x 110mm (LxWxH)Lifting Range: 120-456mm• Double Piston.• Universal Joint.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.• Including Saddle Pad.
< G2000
G2000: 725mm x 340mm x 145mm (LxWxH)Lifting range: 88-485mm • Double Piston.• Universal Joint.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.• Including Saddle Pad.
G2250 >Garage Jack - 2.25 Ton.
G2250: 644mm x 335mm x 165mm (LxWxH)Lifting Range: 135-495mm• Gear type.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.
G1250 >
G1250: 553mm x 238mm x 89mm (LxWxH)Lifting range: 89-354mm • Double Piston.• Universal Joint.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.• Including Saddle Pad.• Aluminum frame with steel lifting arm.
55
F2000 F7670 F5210 G1250 G2000 G2250 G3003
2 ton 2 ton 2.25 ton 1.25 ton 2.5 ton 2.25 ton 3 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or
Wheels
135350220500486035
49021011510.2111
0.018x
-
-
-
Metal
85373288500606540
56021214513.3141
0.025x
-
-
-
Metal
150533383620607550
71925012519.4211
0.036x
-
-
-
Metal
893542659461005040
55323814215
16.31
0.030x
x
x
-
Metal
8848539711001107055
72534014032341
0.053x
x
x
-
Metal
13549536011001109050
74034514030.231.5
10.054
x
-
-
-
Metal
1204563361145110805868033416232
34.21
0.049x
x
x
-
Metal
Hydraulic service jacks
Air Vent Valve or Oil Filler Plug
MetalWheels
Universal Joint
A
F
I J
H
W
L
BC E
Specifications
56
Jack stands
• High quality cast ductile iron ratchet bar.• Ideal for auto, truck service, farm and shop use.• Height adjustment mechanism allows smooth upward movement while release handle locks into position.• Meets or exceeds ANSI/PALD standards.• Sturdy stamped steel construction.
T3004 >Jack Stands Ratchet (Extra High) - 2.25 Ton
T3004: 215mm x 170mm x 340mm (LxWxH)Lifting Range: 340-535mm
T2002 >Jack stands foldable - 2 Ton
G2002: 250mm x 250mm x 249mm (LxWxH)Lifting Range: 280-355mm
< T3003Jack Stands Ratchet - 2.8 Ton
T3003: 208mm x 180mm x 284mm (LxWxH)Lifting Range: 305-450mm
57
Lawn mower lift
T5350B >Lawn mower lift
Capacity: 155 kgLift height: 508mmWeight: 36,5 kgCompatible wheel track: 116,8cm - 129,5cm outside span
• Perform necessary mower maintenance .• Easy, convenient hydraulically powered foot pedal operation .• Rubber coated saddle to prevent unwanted movement .• Welded solid steel construction.• Positive dual locking safety latch for added safety. • Four steel wheels for sturdy mobility.• Patent pending .• Extra side breackets for more stability.
Lawn mower lift instruction video:
58
Engine crane & body repair kit
• Polished ram plunger and cylinder protects seals from abrasion.• Foldable model with retractable front legs and lifting boom for easy storage.• Built-in safety valve ensures operator’s safety against overloading.• Heavy duty welded construction with rugged reinforced tubular steel.
< C1001Foldable Engine Crane
C1001: 1540mm x 1000mm x 1330mm (LxWxH)Capacity: 1000 kgLifting Range: 50-2280mm
< A100010 Ton Body repair kit
Boom Length
Max. HookHeight Min.
Hook Height
Lock position of extension boom
CapacityMinimum hook
height (mm)Maximum hook
height (mm)Boom Length (mm)
N.W. (kg)G.W. (kg)
P1
1000
280
2070
710
P2
850
200
2140
795
P3
700
125
2205
870
P4
550
50
2280
950
C1001
73.080.0
• Sets are portable for easy usage in shop or on the road.• Designed for applications of pushing, spreading and pressing of vehicle body panels as well as various component parts and assemblies.
59
Pit jack
P0501 >Pit Jack
P0501: 600mm x 600mm x 1100mm (LxWxH)Capacity: 500 kgLifting Range: 1100-1900mm
HTR (Hold-To-Run) mechanism, designed to assure users maximum safety when the valve is released.
P0501
500 kgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (kg)G.W. (kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1100190070050
77576
32560060097528301
0.069
Pit Jack
GD
C
AEH
F
B
L
W
Transmission SaddleS0501T (Optional)
Supporting DeviceM9409 (Optional) See Page 105 for more content
60
Pro
fess
iona
l han
d to
ols
61
Index
Tool cabinet & Tool trolley Page 62 - 65
Modules (sets) Page 66 - 67
Modules Page 68 - 73
Socket sets Page 74 - 79
Tool set Page 80 - 83
Adaptor sets Page 84 - 85
Ratchet handles Page 86
Gear wrench & sets Page 87 - 89
Combination & Adjustable wrenches Page 90 - 91
Pliers set & Wire cutters Page 92 - 93
Screwdrivers Page 94 - 95
Torque wrenches & Ratchet handles Page 96 - 97
Air impact wrenches Page 98 - 100
Cordless Impact wrenches Page 101
Impact sockets & Adapters Page 102 - 103
Automotive misc & Clutch tools Page 104 - 107
Bearing driver & Oil filling system Page 108 - 109
Bit sets Page 110
Rethreading & Locking nut extractor set Page 111
Pullers & Splitters Page 112 - 113
Punch, chisel & Hex key sets Page 114
Wrench, Twist drill bits & Oil drain plug key set Page 115
Tyre bead seater & Heavy duty pry bars Page 116
Dead blow hammer & Magnetic holders Page 117
Induction heater Page 118 - 119
Hot stapler Page 120
Auto body repair tools Page 121
Mechanix display unit Page 122 - 123
62
Tool cabinet
M3531 >Tool Chest - 3 Drawers & Top
Top Chest 676 x 459 x 400Drawer x3 568 x 398 x 75
M3500 - MDF02 >Wooden Top Plate
Top Plate 676 x 459 x 30
63
M3760 >Tool Cabinet - 6 Drawers• Handle for push or pull
Top Cabinet 676 x 459 x 815Drawer x5 568 x 398 x 75Drawer x1 568 x 398 x 154
- You can only open 1 drawer at
< M3770Tool Cabinet - 7 Drawers• Handle for push or pull
Top Cabinet 676 x 459 x 1005Drawer x5 568 x 398 x 75Drawer x2 568 x 398 x 154
- You can only open 1 drawer at
64
Tool cabinet & Tool trolley
M3591 >Tool Cabinet - 6 Drawers & 1 Locker• 1 Locker with 2 drawers. (Adjustable in height)• Handle for push or pull
Tool Cabinet 1044 x 459 x 1035Drawer x1 938 x 398 x 135Drawer x5 568 x 398 x 75Drawer x1 568 x 398 x 154Locker x1 330 x 398 x 588Drawer x2 300 x 390 x 75
< M3593Tool Trolley - 3 Drawers• Handle for push or pull
Tool Trolley 860 x 440 x 1000Drawer x3 568 x 398 x 75
65
< M3397Tool Trolley - 3 Trays• Handle for push or pull
Tool Trolley 910 x 459 x 985Load per shelf max. 35 kg
M3379 >Tool Chest - 9 Drawers & Top• With Ball bearing slides
Tool Chest 660 x 307 x 433Drawer x6 170 x 270 x 50Drawer x2 570 x 270 x 50Drawer x1 570 x 270 x 75
M3350 >• Metal Tool Box
Tool Box 475 x 200 x 200mm
66
Tool ModulesMD02 & MD12
M0023 >Drawer 1
M0127 >Drawer 2
M0032 >32 Pc Bit SetSee page 110
M0048 >48 Pc 1/4" Drive Socket Set
M0027 >27 Pc 1/2" Drive Socket Set
M0029 >29 Pc 3/8" Drive Socket Set
M0078 >78 Pc Bit Set
M003232 Pc Bit Set
M8308 >8 Pc Screwdriver Set
M8207 >7 Pc T-Handle BallPoint & Hex KeyWrench Set
M8107 >7 Pc T-HandleTorx Tamperproof& Torx KeyWrench Set
M0013 >13 Pc CombinationWrench Set
M8306 >6 Pc Torx Screwdriver Set
M0012 >12 Pc GearWrench Set
M8304 >4 Pc Deluxe Pliers Set
M8011 >11 Pc Hammer & Punch Set
Drawer 1
Drawer 2
Drawer 3
Drawer 4
MD02
MD12
67
M0048 >48 Pc 1/4" Drive Socket Set
M0027 >27 Pc 1/2" Drive Socket Set
M0029 >29 Pc 3/8" Drive Socket Set
M0078 >78 Pc Bit Set
M003232 Pc Bit Set
M8308 >8 Pc Screwdriver Set
M8207 >7 Pc T-Handle BallPoint & Hex KeyWrench Set
M8107 >7 Pc T-HandleTorx Tamperproof& Torx KeyWrench Set
M8104 >4 Pc CombinationWrench Set
M0013 >13 Pc CombinationWrench Set
M8306 >6 Pc Torx Screwdriver Set
M8204 >4 Pc Circlip Pliers Set
M0012 >12 Pc GearWrench Set
M8304 >4 Pc Deluxe Pliers Set
M8011 >11 Pc Hammer & Punch Set
M0006 >6 Pc Double Flexible Socket Wrench Set
Tool ModulesMD15
Drawer 1
Drawer 2
Drawer 3
Drawer 4
Drawer 5
MD15
68
Modules
< M0032Bit Set - 32 PcSee Page 110for contents
M0127 >Handtools - 127 Pc - 1/2"Dr. & 1/4"Dr. Sockets - Bits
M0127: 565mm(L) x 393mm(W) x 55mm(H)
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Swivel Handle - 390mmUniversal JointExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34E-Socket (6pt) : E12 - E14 - E16 - E18 - E20 - E22 - E24Deep Socket (6pt / mm) : 14 - 15 - 17 - 18 - 19 - 22 - 24Spark Plug Socket (6pt / mm) : 16 - 21Shank Bit Adaptor - 5/16"
Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmBit Hex + Electric Wrench AdaptorBit Adaptor - 1/4"Flex Bar - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt) : E4 - E5 - E6 - E7 - E8 - E10 - E11Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
Content - Others :3-Way Adaptor : 3/8"F x 1/4"M - 3/8"F x 1/2"MHex Key Set (mm) : 1.5 - 2 - 2.5
Shank Bits - 5/16"Hex : H10 - H12 - H14Philips : PH4Pozi : PZ4 < M0023
Handtools - 23 PcScrewdriver, Pliers & Wrench
M0023: 565mm(L) x 393mm(W) x 55mm(H)
Content:Combination Wrench (mm) : 8 - 9 - 10 - 11 -12 - 13 -
14 - 15 - 16 - 17 - 19Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Cutter - 160mm
Screwdrivers :Slotted (mm) : 5x75, 6x100, 6x150, 8x200Philips : PH1x75, PH2x100Stubby - 38mm : SL6 - PH2
Spline : M5 - M6 - M8 - M10 -M12Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT45 - TT50 - TT55 - TT60
69
Modules
M0027 >1/2" Dr. Socket set - 27 Pc
M0027: 390mm(L) x 187mm(W) x 50mm(H)
Content: Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 3/8"F - 1/2"MExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19 - 22
M0048 >1/4" Dr. Socket set - 48 Pc
M0048: 390mm(L) x 187mm(W) x 45mm(H)
Content: Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 3/8"F - 1/4"MBit Hex + Electric Wrench Adaptor - 1/4"Spinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
Bit Sockets :Slotted (mm) : 4 - 5.5 - 6.5Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8
M0029 >3/8" Dr. Socket set - 29 Pc
M0029: 390mm(L) x 187mm(W) x 45mm(H)
Content:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 1/2"F - 3/8"MExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 -
15 - 16 - 17 - 18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 21
70
Modules
M0012 >Gear Wrench set - 12 Pc
M0012: 390mm(L) x 187mm(W) x 45mm(H)
Content: Gear Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19Adaptors1/4" Dr. (Quick release) : 10 mm1/2" Dr. (Quick release) : 13 mm3/8" Dr. (Quick release) : 19 mm1/4" Dr. Bit (Mirror polish) : 10 mm
< M2012Reversible Gear Wrench set - 12 Pc
M2012: 390mm(L) x 187mm(W) x 55mm(H)
Content: Gear Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19Adaptors1/4" Dr. (Quick release) : 10 mm1/2" Dr. (Quick release) : 13 mm3/8" Dr. (Quick release) : 19 mm1/4" Dr. Bit (Mirror polish) : 10 mm
M0013 >Combination Wrench set - 13 Pc
M0013: 390mm(L) x 187mm(W) x 50mm(H)
Content: Combination Wrench (mm) : 8 - 9 - 10 - 11 - 12 - 13 - 14 -
15 - 16 - 17 - 18 - 19 - 22
< M8104Combination Wrench set - 4 Pc
M8104: 390mm(L) x 187mm(W) x 50mm(H)
Content: Combination Wrench (mm) : 24 - 27 - 30 - 32
71
< M8203Offset Ring Wrench set - 3 Pc
M8203: 390mm(L) x 187mm(W) x 55mm(H)
Content: Offset Ring Wrench (mm) : 24/26 - 25/28 - 30/32
M0006 >Double Flexible Socket Wrench set - 6 Pc
M0006: 390mm(L) x 190mm(W) x 60mm(H)
Content: Double Flexible Socket Wrench (mm) : 8/9 - 10/11 - 12/13 - 14/15 -
16/17 - 18/19
< M8204Circlip Pliers set - 4 Pc
M8204: 390mm(L) x 190mm(W) x 60mm(H)
Content: External Straight - 180 mmExternal Bent - 180 mmInternal Straight - 180 mmInternal Bent - 180 mm
M8304 >Deluxe Pliers set - 4 Pc
M8304: 390mm(L) x 190mm(W) x 60mm(H)
Content: Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Pliers - 160mm
Modules
72
< M8306Trox Screwdriver set - 6 Pc
M8306: 390mm(L) x 187mm(W) x 45mm(H)
Content: Torx Screwdriver- 100mm: T10 - T15 - T20 - T25 - T30- 115mm: T40
< M8107T-Handle Torx Tamperproof & Torx Key Wrench set - 7 Pc
M8107: 390mm(L) x 187mm(W) x 40mm(H)
Content: T5 Handle Torx Tamperproof Wrench& Torx Key Wrench- 100mm: T10 - T15- 150mm: T20 - T25 - T27 - T30 - T40
M8207 >T-Handle Ball Point & Hex Key Wrench set - 7 Pc
M8207: 390mm(L) x 187mm(W) x 40mm(H)
Content: T5 Handle Ball Point & Hex Key Wrench- 100mm: H2 - H2.5 - H3- 150mm: H4 - H5 - H6- 200mm: H8
M8308 >Screwdriver set - 8 Pc
M8308: 390mm(L) x 187mm(W) x 45mm(H)
Content: Slotted (mm) : 5 x75Slotted with Hex (mm) : 6 x100 - 6 x150 - 8 x200Philips: PH1 x75Philips with Hex : PH2 x100Stubby - 38mm : SL6 - PH2
Modules
73
< M00171/2"Dr. Impact Socket set - 17 Pc
M0017: 390mm(L) x 187mm(W) x 55mm(H)
Content: Impact Socket- 38mm (mm) : 10 - 11 - 12 - 13 - 14 - 15 -
16 - 17 - 19 - 21 - 22- 42mm (mm) : 24- 82mm (mm) : 17 - 19 - 21 - 22 - 24
< M8000Storage module
M8000: 390mm(L) x 187mm(W) x 55mm(H)
M0078 >5/16" Bit set - 78 Pc
M0078: 390mm(L) x 187mm(W) x 50mm(H)
Content: Stubby Ratchet Bit HandlePhilips - 30mm : PH2 - PH3Slotted - 30mm (mm) : 8 - 10Torx Tamperproof - 30mm : TT20 - TT25 - TT27 - TT30 - TT40 - TT45 - TT50 - TT55 - TT60Torx Tamperproof - 75mm : TT20 - TT25 - TT27 - TT30 - TT40 - TT45 - TT50 - TT55 - TT60Torx Tamperproof - 120mm : T40 - T45 - T50 - T55Spline - 30mm : M5 - M6 - M8 - M10 - M12Spline - 75mm : M5 - M6 - M8 - M10 - M12Hex - 30mm : H5 - H6 - H7 - H8 - H10 - H12Hex - 75mm : H5 - H6 - H7 - H8 - H10
M8011 >Hammer & Punch set - 11 Pc
M8011: 390mm(L) x 187mm(W) x 40mm(H)
Content: Punch (mm) : 2x115, 3x125, 4x150, 5x165, 6x180, 8x180Center Punch (mm) : 2x120Cold Chisel (mm) : 18x128Soft Face Hammer (PU) : 460gr/35mmEnginers Hammer : 300gr
Modules
M0032 >Bit Set - 32 PcSee Page 110for contents
74
Socket set
M1443 >1/4" Dr. Socket set - 43 Pc
M1443: 290mm(L) x 210mm(W) x 60mm(H)
Content:Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Bit Adaptor - 1/4"
Shank Bits :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6
Material : Socket = CR-V / Bit = S2
75
Socket set
M3852 >3/8" Dr. Socket set - 52 Pc
M3852: 380mm(L) x 280mm(W) x 80mm(H)
Content:Ratchet Handle (Quick release / 72 Teeth)Universal JointExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 213-Way Adaptor - 1/2"F
Bit Sockets :Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2Slotted (mm) : 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT30 - TT40 - TT45 - TT50 - TT55Hex : H3 - H4 - H5 - H6 - H7 - H8 - H10
Material : Socket = CR-V / Bit = S2
76
M1395 >1/4" & 3/8" Dr. Socket set - 95 Pc
M1395: 380mm(L) x 260mm(W) x 70mm(H)
Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FBit Adaptor - 1/4"Spinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
Bits :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6
Material : Socket = CR-V / Bit = S2
Content - 3/8" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 1/2"FExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 -
18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 21
Bit Sockets :Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2Slotted (mm) : 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT30 -
TT40 - TT45 - TT50 - TT55Hex : H3 - H4 - H5 - H6 - H7 - H8 - H10
Socket set
77
Socket set
M1297 >1/4" & 1/2" Dr. Socket set - 97 Pc
M1297: 380mm(L) x 280mm(W) x 80mm(H)
Content 1/4" Dr.:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt / mm) : E6 - E7 - E8 - E10 - E11
Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8
Material : Socket = CR-V / Bit = S2
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FShank Bit Adaptor - 5/16"Extension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19E-Socket (6pt / mm) : E12 - E14 - E16 - E18 - E20Spark Plug Socket (6pt / mm) : 16 - 21
Content - others : Shank Bits - 5/16"Philips : PH3 - PH4Pozi : PZ3 - PZ4Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT40 - TT50 - TT55Hex : H10 - H12 - H14
78
Socket sets
M1228 >1/2" Dr. Socket set - 28 Pc
M1228: 380mm(L) x 280mm(W) x 90mm(H)
Content:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19Spark Plug Socket (6pt / mm) : 16 - 21
Material : CR-V
< M3414 3/4" Dr. Socket set - 14 Pc
M3414: 500mm(L) x 390mm(W) x 100mm(H)Content: Ratchet Handle (Quick release / 72 Teeth / Solid / 500mm)Extension Bar - 4"/100mmExtension Bar - 8"/200mmSliding T-Bar - 450mmSocket (6pt / mm) : 22 - 24 - 27 - 30 - 32 -
36 - 38 - 41 - 46 - 50
Material : CR-V
79
Socket sets
M5713 >3/4" Dr. Socket set - 21 Pc
M5713: 536mm(L) x 345mm(W) x 98mm(H)
Content: Ratchet Handle (40 Teeth)Extension Bar - 4"/100mmExtension Bar - 8"/200mmExtension Bar - 16"/400mmSliding T-Bar - 450mmSocket (6pt / mm) : 19 - 21 - 22 - 23 - 24 - 26 - 27 - 29 -
30 - 32 - 35 - 36 - 38 - 41 - 46 - 50
Material : CR-V
M8015 >1" Dr. Socket Wrench set with metal case - 15 Pc
M8015: 500mm(L) x 390mm(W) x 100mm(H)
Content: Ratchet HandleReversible Handle - 635mmExtension Bar - 8"/200mmExtension Bar - 16"/400mmSliding T-Bar - 450mmSocket (6pt / mm) : 36 - 41 - 46 - 50 - 55 - 60 - 65 - 70 - 75 - 80
Material : CR-V
80
M0105 >1/4" & 1/2" Dr. Socket set in aluminum case - 105 Pc
M0105: 565mm(L) x 350mm(W) x 100mm(H)
Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 8 - 10 - 13E-Socket (6pt) : E6 - E7 - E8
Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Spline : M4 - M5 - M6Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6
Content - Others :Ball Key set (mm) : 1.5 - 2 - 2.5 -3 - 4 - 5 - 6 - 8 - 10Combination Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 17 - 19
Bits - 30mm : 5/16"Philips : PH3Pozi : PZ3Spline : M8 - M10 - M12Torx Tamperproof : TT45 - TT50 - TT55 - TT60Hex : H8 - H10
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointShank Bit Adaptor - 5/16"3-Way Adaptor - 3/8"FExtension Bar - 4.5"/115mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34Deep Socket (6pt / mm) : 14 - 15 - 17 - 19 - 22E-Socket (6pt) : E10 - E12 - E14 - E16 - E18 - E20Spark Plug Socket (6pt / mm) : 16 - 21
Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Spline : M4 - M5 - M6Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6Carton=2 pcs / CBM=0.04
Material : Socket = CR-V / Bit = S2
Tool set
81
M1500 >1/2" Dr. & 1/4" Dr. Sockets - 150 Pc
M1500: 560mm(L) x 390mm(W) x 60mm(H)
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Swivel Handle - 390mmUniversal Joint3-Way Adaptor - 3/8"FExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34E-Socket (6pt) : E12 - E14 - E16 - E18 - E20 - E22 - E24Deep Socket (6pt / mm) : 14 - 15 - 17 - 18 - 19 - 22 - 24Spark Plug Socket (6pt / mm) : 16 - 21Shank Bit Adaptor - 5/16"
Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmBit Hex + Electric Wrench Adaptor - 1/4"Bit Adaptor - 1/4"3-Way Adaptor - 3/8"FFlex Bar - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt) : E4 - E5 - E6 - E7 - E8 - E10 - E11Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
Content - Others :Hex Key Set (mm) : 1.5 - 2 - 2.5Combination Wrench (mm) : 8 - 9 - 10 - 11 -12 - 13 -
14 - 15 - 16 - 17 - 19Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Cutter - 160mm
Shank Bits : 5/16"Hex : H10 - H12 - H14Philips : PH4Pozi : PZ4Spline : M5 - M6 - M8 - M10 -M12Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT45 - TT50 - TT55 - TT60
Screwdrivers :- 38mm : SL6 - PH2- 75mm : SL5 - PH1- 100mm : SL6 - PH2- 150mm : SL6- 200mm : SL8
Tool set
M0032
M0032 >Bit Set - 32 PcSee Page 110for contents
82
M1256 >1/2" Dr. Tool set - 56 Pc
M1256: 565mm(L) x 350mm(W) x 100mm(H)
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointExtension Bar - 5"/125mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 15 - 17 - 19 - 22 - 24 - 27Spark Plug Socket (6pt / mm) : 16 - 21
Content - others :Hex Key Set (mm) : 1.5 - 2 - 3 - 4Combination Wrench (mm) : 11 -12 - 13 - 14 - 15 - 17Water Pliers - 250mmCombination Pliers - 180mmHammer - 300g
Screwdrivers :- 40mm : SL6 - PH6- 100mm : SL6 - PH6- 200mm : PZ8
Content - 1/4" Dr. :Bit Adaptor - 1/4"/6mmSpinner Handle - 150mmSocket (6pt / mm) : 8 - 9 - 10 - 11 - 12 - 13
Bits :Philips : PH1 - PH2 - PH3Slotted (mm) : 4 - 5.5 - 7Torx Tamperproof : TT10 - TT15 - TT20 - TT30Hex : H3 - H4 - H5 - H6
Material : Socket = CR-V / Bit = S2
Tool set
83
M0119 >1/4" & 1/2" Dr. Tool set - 119 Pc
M0119: 565mm(L) x 350mm(W) x 100mm(H)
Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointBit Adaptor - 5/16"Extension Bar - 3"/75mmExtension Bar - 10"/250mmExtension Bar (Flexible) - 15"/375mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 1819 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32E-Socket (6pt) : E10 - E11 - E12 - E14 - E16 - E18 - E20 - E22Spark Plug Socket (6pt / mm) : 16 - 21
Bits - 30mm :Slotted (mm) : 3 - 4 - 5.5 - 7Philips : PH1 - PH2 - PH3Torx Tamperproof : TT10 - TT20 - TT25 - TT27 - TT30 -
TT40 - TT45 - TT50
Bits - 75mm :Hex : H4 - H5 - H6 - H7 - H8 - H10 - H12
Content - others :Combination Wrench (mm) :6 - 7 - 8 - 9 - 10 - 12 - 13 - 1415 - 16 - 17 - 18 - 19 - 21 - 2224 - 27
Water Pliers - 250mmCombination Pliers - 180mmHammer - 300g
Screwdrivers :- 40mm : SL6 - PH6- 200mm : SL8 - PH8
Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Spinner Handle - 150mmUniversal JointBit AdaptorExtension Bar - 2"/50mmExtension Bar - 4"/100mmExtension Bar (Flexible) - 6"/150mmSliding T-Bar - 110mmSocket (6pt / mm) : 4 - 5- 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
Bits :Slotted (mm) : 3 - 4 - 5.5 - 7Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT30Hex : H3 - H4 - H5 - H6
Material : Socket = CR-V / Bit = S2
Tool set
84
M1210 >Extension Bar set - 9 Pc
M1210: 280mm(L) x 182mm(W) x 50mm(H)
ContentExtension Bar- 50mm / 2" : 1/4" - 1/2"- 75mm / 3" : 3/8"- 100mm / 4" : 1/4" - 3/8"- 125mm / 5" : 1/2"- 225mm / 9" : 1/4" - 3/8"- 250mm / 10" : 1/2"
Material : CR-V
< M1234Adaptor set - 6 Pc
M1234: 150mm(L) x 107mm(W) x 50mm(H)
ContentAdaptor- 1/4"(M) : 3/8"(F)- 3/8"(M) : 1/4"(F) - 1/2"(F)- 1/2"(M) : 3/8"(F) - 3/4"(F)- 3/4"(M) : 1/2"(F)
Material : CR-V
M1208 >Dr. Adaptor & Universal Joint set - 8 Pc
Content :Dr. Universal Joint : 1/4" - 3/8" - 1/2"Dr. Adaptor :- 1/4" (M) : 3/8" (F)- 3/8" (M) : 1/4" (F) - 1/2" (F)- 1/2" (M) : 3/8" (F)Bit Adaptor : 1/4"
Material : CR-V
Adaptor sets
85
< M24351/4" Reversible Bit & Socket Ratchet Handle set - 35 Pc
M2435: 173mm(L) x 105mm(W) x 42mm(H)
Content - 1/4" Dr:Ratchet Handle (Double reversible / 72 Teeth)Bit Adapter - 4"Extension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 -10 - 11 - 12 - 13
Bits :Slotted (mm) : 4 - 5.5 - 6.5Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6 - H8
M0034 >Star Bit Socket set - 34 Pc
Content :E-Socket :- 1/4" : E4 - E5 - E6 - E7 - E8- 3/8" : E10 - E12 - E14 - E16- 1/2" : E18 - E20Bit Socket - Torx :- 1/4" : T8 - T10 - T15 - T20 - T25 - T27 - T30- 3/8" : T40 - T45 - T47 - T50- 1/2" : T55 - T60Bit Socket - Torx Tamperproof :- 1/4" : TT10 - TT15 - TT20 - TT25 - TT27 -TT30- 3/8" : TT40 - TT45 - TT50- 1/2" : TT55
Material : CR-V
< M0043 1/4", 3/8" & 1/2" Dr. Xi-on Socket set - 43 Pc
The Xi-on Socket Set offers an improved design on the point of contact and always succeeds in those approximately 85% rounded nuts/bolts compared to conventional sockets.
Features:• Protects the nut/bolt, prevents the nut/bolt from rounding.• High performance design allows the socket to contact the nut/
bolt away from the corner while the torque can evenly spread all over the head of the nut/bolt makes the turning labor-saving.
• Extends the life of a nut/bolt.
Content :- 1/4" Dr. : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm
- 3/8" Dr. : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
- 1/2" Dr. : 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm
Socket sets
M0004 > Demo block
86
Ratchet handles >
M0142 : 1/4" Ratchet Handle - 72 TeethLength - 132mm
M0382 : 3/8" Ratchet Handle - 72 TeethLength - 270mm
M0122 : 1/2" Ratchet Handle - 72 TeethLength - 435mm
M0142
M0122
M0382
M0003 >Stubby Ratchet Handle set - 3 Pc M0003 : 181mm(L) x 138mm(W) x 38mm(H)
Content :Ratchet Handle - 72 Teeth (Stubby) :- 95mm : 1/4"- 115mm : 3/8"- 150mm : 1/2"
Material : CR-V
M0141 : 1/4" Ratchet Handle - 72 Teeth
M0121 : 1/2" Ratchet Handle - 72 Teeth
M0381 : 3/8" Ratchet Handle - 72 Teeth
M0141
M0121
M0381
Ratchet handles
87
Gear wrenches
< M7808 - M7819Reversible gear wrenches
M7580 - M7599 >Gear wrenches
M7580 : 8mm / 140mm(L) x 16.5mm(W) M7583 : 9mm / 143mm(L) x 19.0mm(W) M7584 : 10mm / 160mm(L) x 20.7mm(W) M7585 : 11mm / 168mm(L) x 22.4mm(W)M7586 : 12mm / 174mm(L) x 23.7mm(W)M7587 : 13mm / 180mm(L) x 25.7mm(W) M7588 : 14mm / 193mm(L) x 27.4mm(W) M7589 : 15mm / 200mm(L) x 28.8mm(W) M7591 : 16mm / 216mm(L) x 30.4mm(W) M7592 : 17mm / 233mm(L) x 32.3mm(W) M7593 : 18mm / 239mm(L) x 33.4mm(W) M7594 : 19mm / 250mm(L) x 34.5mm(W) M7596 : 21mm / 285mm(L) x 42.0mm(W) M7597 : 22mm / 285mm(L) x 42.0mm(W) M7598 : 24mm / 325mm(L) x 47.0mm(W) M7599 : 25mm / 325mm(L) x 47.5mm(W)
Material : CR-V
M7808 : 8mm / 135mm(L) x 17.0mm(W)M7809 : 9mm / 148mm(L) x 18.5mm(W)M7810 : 10mm / 158mm(L) x 20.0mm(W) M7811 : 11mm / 165mm(L) x 22.0mm(W) M7812 : 12mm / 172mm(L) x 23.0mm(W)M7813 : 13mm / 176mm(L) x 25.0mm(W)M7814 : 14mm / 191mm(L) x 27.0mm(W) M7815 : 15mm / 206mm(L) x 33.0mm(W) M7816 : 16mm / 208mm(L) x 30.0mm(W) M7817 : 17mm / 231mm(L) x 37.0mm(W)M7818 : 18mm / 234mm(L) x 37.0mm(W)M7819 : 19mm / 246mm(L) x 39.0mm(W)
Material : CR-V
M2402 >Reversible multi gear wrench - 2 Pc
Fits 5 different nut and bolt styles:- 6pt Hex : 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"- 12pt Hex (mm) : 8, 10, 11, 13, 14, 16, 17, 19- External Torx : E10, E12, E14, E18, E20, E24- Spline : M10, M12, M14, M16, M18, M20, M22- Square: 5/16", 3/8", 7/16", 1/2", 9/16"
Material : CR-V
88
Gear wrench sets
M2305 >Gear Wrench set (72 Teeth) - 5 Pc
M2305: 280mm(L) x 190mm(W) x 50mm(H)
Content: Gear Wrench (72 Teeth / mm) : 8 - 10 - 13 - 17 - 19
Material : CR-V
< M23088 Pc Gear Wrench Set, 72 teeth, CR-V 6140.
M2308: 275mm x 200mm x 50mm (LxWxH)
Content: 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19 mm
M2312 >12 Pc Gear Wrench Set, 72 teeth, CR-V 6140.
M2312: 295mm x 290mm x 60mm (LxWxH)
Content: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm
89
Reversible gear wrench sets
< M2405Reversible Gear Wrench set (72 Teeth) - 5 Pc
M2405: 280mm(L) x 190mm(W) x 50mm(H)
Content: Gear Wrench (Reversible / 72 Teeth / mm) : 8 - 10 - 13 - 17 - 19
Material : CR-V
M2408 >Reversible Gear Wrench set (72 Teeth) - 8 Pc
M2408: 275mm(L) x 200mm(W) x 50mm(H)
Content: Gear Wrench (Reversible / 72 Teeth / mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19
Material : CR-V
< M2412Reversible Gear Wrench set (72 Teeth) - 12 Pc
M2412: 295mm(L) x 290mm(W) x 60mm(H)
Content: Gear Wrench (Reversible / 72 Teeth / mm) :8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19
Material : CR-V
90
Combination wrenches
< M2339Combination Wrench set - 13 Pc
Content :Combination Wrench (mm) :8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 1718 - 19 - 22
Material : CR-V
M9104 >Combination Wrench set - 4 Pc
Content :Combination Wrench (mm) : 24 - 27 - 30 - 32
Material : CR-V
91
Adjustable wrenches & Plier sets
M2560, M2562, M2563 >Adjustable Wrenches
M2560 : 8" / 200mmMaterial : CR-V
M2562 : 10" / 250mmMaterial : CR-V
M2563 : 12" / 300mmMaterial : CR-V
< M2502 Self adjusting multi-grip pliers - 2 Pc
• Innovative design allows the jaws to automatically adjust to any size.• Straight and V-type jaws for hex, square and round objects.
Set includes 175mm(L) & 255mm(L) pliers Jaw capacity : 40mm & 60mm
M9416 >Hose pinch off plier set - 3 Pc
Content :(L) 8 inch - 203mm(L) 10 inch - 254mm(L) 12 inch - 304mm
92
Pliers set
M9304 >Deluxe Pliers set - 4 pc
M9304: 390mm(L) x 190mm(W) x 60mm(H)
Content Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Pliers - 160mm
Material : CR-V4702011 4702012 4702013 4702014
< M9438 Hose Clamp Pliers Jaw : 0-38 mmMaterial : CR-MO
< M9455 Hose Clamp Pliers Jaw : 22-55 mmMaterial : CR-MO
M9410 >CV Boot Clamp Pliers
For easy installation of ear-type clamps on fuel
and CV joint clamps.
< M9411 CV Boot Band Cutter - L=216mm
Special design to easily cut the stainless steel clampswithout damaging the CV boot. Spring loaded action withheat treated 440 steel jaes and comfort grip handles.
93
Wire cutters
< M9402 Adjustable Wire Cutter / Stripper Tool
• Easily Cuts and strips wire 0.75 ~ 4.0 mm.• Automatically adjusts to wire size.
< M9404Multi-Purpose 4-in-1 Cutter
• Pliers in nose.• Easily cuts and strips wire Ø0.26 ~ Ø8.0 ~ mm.• TPR handles for comfortable soft grip.
M9405 >Oblique Cutter - 5"
• High quality diagonal cutter pliers designed for precision work, durable and sharp cutting edge by CNC grinding machine.
• • It is also suitable for injestion gate, electronic repair, craftwork or
jewelry making ect.• It offers user a TPR confortable soft grip and return spring action.• Use for plastic or under 2.0 mm soft material only.
< M9406Multi-Purpose 5-in-1 Cutter
• Crimps insulated terminals 1.5 - 2.5 - 6.0 mm2.• Crimps open barrel terminals & disconnectors 1.5 - 2.5 - 6.0 mm2.• Easily cuts and strips wire 0.75 - 1.0 - 1.5 - 2.5 - 4.0 - 6.0 mm2.• Cleanly shears bolts M2.6 - M3.0 - M3.5 - M4.0 - M5.0.• TPR handles for comfortable soft grip.
M9403 > 2 in 1 Plier Wire Stripper & Wire Cutter
• 3-Function wire tool with reverse switch action and build in safety lock.• Stripping Capacity : 0.8 - 1.0 - 1.3 - 1.6 - 2.0 - 2.6mm 20 - 18 - 16 - 14 - 12 - 10 AWG
94
Screwdrivers
< M9305Screwdriver set - 5 Pc
M9305: 300mm(L) x 125mm(W) x 40mm(H)
Content :Slotted (mm) : 3.5 x 75 - 5.5 x 125 - 6.5 x 150Philips : PH1 x 80 - PH2 x 100
Material : CR-V
< M9308Screwdriver set - 8 Pc
M9308: 390mm(L) x 190mm(W) x 60mm(H) Content :Slotted (mm) : 5 x75Slotted with Hex (mm) : 6 x100 - 6 x150 - 8 x200Philips : PH1 x75Philips with Hex : PH2 x100Stubby - 38mm : SL6 - PH2
Material : CR-V
M9306 >Trox Screwdriver set - 6 Pc
M9306: 300mm(L) x 165mm(W) x 40mm(H)
Content :Torx Screwdriver- 100mm : T10 - T15 - T20 - T25 - T30- 115mm : T40
Material : CR-V
95
Scewdrivers
M9393 >Long Screwdriver set - 3 Pc
M9393: 525mm(L) x 155mm(W) x 37mm(H)
Content :Philips : PH1 x 400Slotted (mm) : 4 x 400 Pozi : PZ1 x 400
Material : CR-V
< M9383Stubby Screwdriver set - 3 Pc
M9383: 113mm(L) x 115mm(W) x 37mm(H)
Content :Philips : PH2 x 38Slotted (mm) : 6.5 x 38 Pozi : PZ2 x 38
Material : CR-V
M9307 >Hexagon Screwdriver set - 7 Pc
M9307: 211mm(L) x 316mm(W) x 40mm(H)
Content :- 75 (mm) : 2.5, 3.0- 100 (mm) : 4.0, 5.0- 125 (mm) : 6.0- 150 (mm) : 8.0, 10.0
96
Torque wrenches
< M1000N
M1000N : Torque Wrench - 1" / 1000Nm
1240mm
10N, M500N:
ontents L (mm)-30Nm 285-110Nm 365-210Nm 518-500Nm 865
Lock
Unlock
Quick Lock/Unlock Function
M030N 1/4” Drive
M110N 3/8” Drive
M210N 1/2” Drive
M500N 3/4” Drive
< M2214, M2238, M2212
M2214 : Dual Way Torque Wrench - 1/4" Dr.Range - 5 - 25 NmLength - 245mm
M2238 : Dual Way Torque Wrench - 3/8" Dr.Range - 20 - 100 Nm Length - 410mm
M2212 : Dual Way Torque Wrench - 1/2" Dr.Range - 60 - 340 NmLength - 610mm
M030N, M110N, M210N, M500N >
M030N : Torque Wrench - 1/4" / 6 - 30Nm Length - 285mm
M110N : Torque Wrench - 3/8" / 19 - 110Nm Length - 365mm
M210N : Torque Wrench - 1/2" / 40 - 210Nm Length - 518mm
M500N : Torque Wrench - 1/2" / 100 - 500Nm Length - 518mm
97
Torque wrenches & Ratchet handles
M1219 >
Telescopic Ratchet Handle - 1/2" Dr.M1219 : Max. Torque=750 Nm /
330-485mm (13"-19") / 48 Teeth
M7320 >
Breaker Bar - 1/2" Dr.M7320 : Length 600mm
330 - 485mm
M3424 >
Extension Telescopic Ratchet Handle - 3/4" Dr.M3424 : Max. Torque=1074 Nm / 610 - 915mm (24"-36") / 24 Teeth
M1500N >
M1500N : Torque Wrench - 1" / 1500Nm
1850mm
1170mm
98
Air impact wrenches
< M2064Ultra Compact Air Impact Wrench - 1/2" Dr.Twin Hammer, Handle ExhaustSupplied with 1/2"(f) & 3/4"(m) adaptor
Square drive - 1/2"No-Load speed - 9000 rpmMax Torque - 1356 Nm / 1000 ft-lbAir pressure - 90 PSI / 6,3 BarAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Impacts per minute - 1500
M2060 >Ultra Compact Air Impact Wrench - 3/8" Dr.Twin Hammer, Handle Exhaust
Square drive - 3/8"No-Load speed - 11000 rpmMax Torque - 610 Nm / 450 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 200 Liter/MinuteAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Impacts per minute - 1500
< M2063Air Impact Wrench - 1/2" Dr.
Square Drive - 1/2"No-Load Speed - 8200rpmMax Torque - 1250 Nm / 922 ft-lb3 Torque Forward - Low : 245 Nm / 180 ft-lb - Medium : 650 Nm / 480 ft-lb - High : 990 Nm / 730 ft-lbAir Consumption - 245 Liter/MinuteAir Hose (I.D.) - 8 mmAir Inlet - 1/4"Weight - 2.1 kg / 4.6 lbImpacts per minute - 1500
99
Air impact wrenches
M2062 >Air Impact Wrench - 1/2" Dr.• Twin Hammer• Light Weight, Aluminum & Composite• 3 Forward Speed & 2 Reverse Speed• Maximum Torque 1356 Nm
Square Drive - 1/2"No-Load Speed - 10000rpmMax Torque - 1356 Nm / 1000 ft-lbTorque Forward - 950 Nm / 700 ft-lbTorque Reverse - 1020 Nm / 752 ft-lbAir Pressure - 90 PSI / 6.3 BarAir Consumption - 153 Liter/MinuteAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Capacity - 5/8" (16mm)Impacts per minute - 1200 - 1400
< M2072Air Impact Wrench set - 15 pc
Content :M2062 includedImpact Deep Socket with Plastic Sleeve (mm) : 17 - 19 - 21Impact Deep Socket (mm) : 22 - 23 - 24Oil PotHex Key - 4mmNippleMini Oiler
100
Air impact wrenches
M2016 >Air Impact Wrench - 1" Dr.
Pinless Mechanism- Powerfull Torque OutputAdjustable Torque- 3 Forward Torque Setting- 3 Reverse Torque SettingComfortable, Ergonomic Design- Ergonomically Designed for the operator’s comfort- Long Type with 6" (15cm) Anvil
Square Drive -1"No-Load Speed - 5000 RpmMax Torque - 2712 Nm / 2000 ft-lbTorque Forward - 1742 Nm / 1285 ft-lbTorque Reverse - 1827 Nm / 1348 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 255 Liter/MinuteAir Hose (I.D.) - 19 mmAir Inlet - 1/2"Impacts per min. - 5000
M2034 >Air Impact Wrench - 3/4" Dr.• Twin Hammer.• Light Weight, High Torque.• 3 Forward Speed & 3 Reverse Speed.• Maximum Torque 1630 Nm.
Square Drive - 3/4"No-Load Speed - 5500 rpmMax Torque - 1630 Nm / 1202 ft-lbTorque Forward - 1290 Nm / 951 ft-lbTorque Reverse - 1356 Nm / 1000 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 195 Liter/MinuteAir Hose (I.D.) - 13 mmAir Inlet - 3/8"Impacts per min. - 800 - 1000
101
M2033 >Cordless Impact Wrench - 1/2" Dr.- With 2 batteries
Square Drive - 1/2"No-Load Speed - 1800 rpmMax Torque - 588 Nm / 430 ft-lbVoltage - 18V DCCharging time - 1 hour Auto cut-offCapacity - 1/2" (13mm)Weight - 3 kg (incl. battery 0.53kg)Impacts per minute - 2300
< M2038Mini Cordless Impact Wrench - 3/8" Dr.- With 1 battery
Square Drive - 3/8"No-Load Speed - 2000 rpmMax Torque - 240 Nm / 177 ft-lbVoltage - 18V DCCharging time - 60 ~ 70 mins Auto cut-offCapacity - 3/8" (10mm)Weight - 2 kg (incl. battery 0.53kg)Impacts per minute - 3000
M2041 >Battery
18V DC3.0 Ah Li-ion battery
Apply for : M2033, M2038
Cordless Impact wrenches
M2042 >Battery Charger
18V2.3 Ah Li-ion battery charger
Apply for : M2033, M2038
102
Impact sockets
M3322 >1/2" Impact Socket set - 3 Pc• Thin wall for sport/racing cars• Plastic cover for protection against scratching• Blow-mold case
M3322 : 148mm(L) x 132mm(W) x 450mm(H)
Content :L = 85ml (mm) : 17 - 19 - 21
Material : CR-MO
< M33141/2" Impact Socket set - 14 Pc
M3314 : 230mm(L) x 200mm(W) x 50mm(H)
Content :L = 39ml (mm) : 10 - 12 - 13 - 14 - 17 - 19 - 22 - 24L = 78ml (mm) : 17 - 19 - 21 - 22 - 24 - 27
Material : CR-MO
M3316 >3/4" Impact Socket set - 16 Pc
M3316 : 470mm(L) x 345mm(W) x 84mm(H)
Content :L = 90ml (mm) : 19 - 21 - 22 - 23 - 24 - 26 - 27
30 - 32 - 33 - 34 - 36 - 38 - 41L = 95ml (mm) : 46 - 50
Material : CR-MO
103
M3234 >Impact Adaptor set - 6 Pc
M3234 : 150mm(L) x 107mm(W) x 50mm(H)
Content :Adaptor- 1/4"(M) : 3/8"(F)- 3/8"(M) : 1/4"(F) - 1/2"(F)- 1/2"(M) : 3/8"(F) - 3/4"(F)- 3/4"(M) : 1/2"(F)
Material : CR-MO
Impact adaptor set & wheel nut tools
< M33061/2" Dr. Impact Socket set - 6 Pc
M3306 : 110mm(L) x 300mm(W) x 50mm(H)
Content :L = 88ml (mm) : MS17L = 88ml (mm) : 15 - 17 - 19 - 21 - 22
Material : CR-V & CR-MO
M1217 >1/2" Dr. Wheel Lug Socket - 1 Pc
Content :L = 88ml (mm) : MS17
Material : CR-MO
< M3211Impact socket adaptor set - 11 Pc
Content :L = 39mm : 1/4" x 1/4" - 1.4" x 3/8" 3/8" x 1/4" - 3/8" x 3/8" - 3/8" x 1/2" 1/2" x 2/8" - 1/2" x 1/2" - 1/2" x 3/4" 3/4" x 1/2" - 3/4" x 1" 1" x 3/4"
Material : CR-MO
104
Automotive clutch tools
M9737 >Self adjusting clutch (SAC) master tool kit - 38 pc
• Master tool kit for the professional disassembling & assembling of all self-adjusting clutches (SAC).• Necessary for the pre-thightening of the SAC clutch pressure plates before their removal and installation.• Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.• Single piece, six arm plate has been designed for SAC clutches with 6/8 locking holes.
Content :Clamping tool with 6 arms for clutches with 6/8 locking holes.Face spanner.Compression strut.Clutch mandrel set (BMW): - 15mm x 23mm - 15mm x 28mm - 15mm x 34mm - 15mm x 26.5mm - 15mm x 32.5mm - 15mm x 32.5mm (sleeve)Clutch resetting tool.Handle for campling tool.4 x Knurled nuts for threaded bolts.Three lots of 4 x threaded bolt sets: - M6 / 1.0 screw thread - M8 / 1.25 screw thread - M7 / 1.0 screw threadCluth centering tools: - Centering handle - Handle adapter - Clamping cone (15-22mm) - Clamping cone (22-28mm) - Centering pin (12mm) - Centering pin (14mm) - Centering pin (15mm) - Centering pin (16mm) - Centering pin (17mm) - Centering pin (18mm) - Centering pin (19mm)
105
< M9706 Clutch Aligner Tool for Trucks - 6 Pc
Content :Mandrel NO. 1 (mm) : ø36 - ø45Mandrel NO. 2 (mm) : ø42 - ø52Centering Sleeve (mm) : ø20, ø25, ø27, ø30
M9711 >Clutch Aligner set - 11 pc
Content :Spigot Adaptor (mm) : ø12 - ø14 - ø15 - ø16
ø17 - ø18 - ø19 - ø20Mandrel (mm) : 15/19 - 20/26.6 - 23/36
Automotive misc tools
< M3206 Spring Compressor set
Compression length 65 - 320 mm
M9409 >Supporting Device
• The device is indispensable when removing and installingvehicle suspension leg and wheel hub assemblies.
• The device is used in conjunction with an appropriate trans-mission jack.
• The support takes place via the wheel nuts/studs ensuringpositioning of the suspension leg assembly.
106
Automotive misc tools
< M3205 Mini Tube Bender set
Content :One-Hand BenderDies : 3/16"(5mm) - 1/4"(6mm) - 5/16"(8mm)
3/8"(10mm) - 1/2"(12mm)
M9703 >Tail Pipe Expander - 3 Pc
Content :Small-Capacity : 1-1/8" to 1-3/4" (29-44mm) I.DMedium-Capacity : 1-1/2" to 2-7/16" (38-62mm) I.DLarge-Capacity : 2-1/8" to 3-7/16" (54-87mm) I.D
< M3808Strut Nut Kit - 8 Pc
M9711 : 246mm(L) x 115mm(W) x 66mm(H)
Content :Internal Ø10.5 x 22mm Hex Dr. - 3.5mm PIN.Internal Ø12.5 x 22mm Hex Dr. - 3.5mm PIN.Internal Ø14.5 x 22mm Hex Dr. - 5mm PIN.Internal Ø14 x 22mm Hex Dr. - 2.5mm PIN.5mm x 60mm(L) x 1/2” Dr.5.5mm x 48mm(L) x 1/2” Dr.Internal Ø14.5 x 21mm Hex Dr. - 5mm PIN.Internal Ø12.5 external Ø15.5 - 3mm PIN.
107
Automotive misc tools
M3232 >Cooling System & Radiator Cap Master Kit - 33 Pc
Content :
Extension Tube : ø9.5mm x 600mm (L)
4 Conical Bushes: - 24~53 (Ford) - 27~50.5 - ø9.5mm Connector - ø9.5mm L-Type Connector
25 Adaptors: #01 (060) Mercedes. #02 Audi (after 2000).
Opel / VW / Ford. BMW.
#05 BMW. #06 Audi / Citroen / Fiat / Peugeot.
Volvo / VW (before 2000). #08 Adjustable Stationary Seat. #09 50mm Universal Connector (Used with #08 Japanese and European Cars). #10 35mm Universal Connector (Used with #08 Japanese and European Cars). #11 50mm Universal Connector (Used with #08 Japanese and European Cars). #12 Used to link #08 with #09, #10 and #11.
For cars with the cap on the Radiator. Steel Fastener used with adaptors and seat accessories for
Toyota / Suzuki / Nissan.#15 Honda / Toyota.#16 Mitsubishi / Ford / Nissan / Mazda.
Ford.#18 Ford.#19 Mercedes.#20 Mercedes.#21 GM / Ford.#22 GM / Opel.
BMW E-60 (with Circlip). Ford Fiesta / Mondeo (after 2010) / Mazda 3 (2005) (with Circlip).
#25 Toyota Previa / RAV 4.
#11 #10 #09
#14
#23
#15 #05
#02
#04
#03
#01
#06
#07
#24 #12
#08#16
#17
#18#22
#25 #19
#20
#21 #13
108
< M3203 Universal Bearing Race and Seal Driver - 2 Pc
ø18 - 90mm
ø9.5 - 50mm
Bearing driver
109
< M3215 Transmission Oil Filling System - 15 Pc
Capacity: 7.5 Liter
Oil filling system
110
< M00321/4" Bit set - 32 Pc
ContentPhilips : PH1 - PH2 - PH3Slotted (mm) : 4 - 4.5 - 6.5Pozi : PZ1 - PZ2 - PZ3Torx : T8 - T10 - T15 - T20 - T25 - T27 - T30 - T40Torx Tamperproof : TT8 - TT10 - TT15 - TT20
TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8Bit Holder - 6mm : 1/4" DrBit Adapter - 60mm (Quick Magnetic) : 1/4" Dr.
Bit sets
< M0060 Professional Bit set 3/8" Dr. & 1/2" Dr.- 60 Pc
M0060: 327mm(L) x 175mm(W) x 50mm(H)
Content :Bit Adaptor : 3/8" Dr. - 10mm Hex 1/2" Dr. - 10mm Hex 14mm HexImpact Adaptor : 10mm Hex (F) x 14mm Hex (M)
Material : SCM-V / CR-V / SNCM-V
Bit Lengths
Bit Size
Tx-Star
Spline
SplineTemper.
Hex.
Ribe
Square
30 mm 75 mm14 mm 10 mm 14 mm
T60 T60T20-T25-T27-T30T40-T45-T50-T55
M12 M9-M12M5-M6-M8-M10 M14M16
H12 H4-H5-H6-H7-H8H10
H14-H17 H9-H9.5H12
M12M6-M7-M8-M108mm-10mm
M0138 >1/2" Bit ratchet handle 72 teeth - 1 Pc
111
< M2008 Wheel Locking Nut Extractor set - 8 Pc
ContentSockets- Vertical Grooves / Hex=22mm : ø20 - ø22 - ø24 - ø27- Horizontal Grooves / 1/2"Dr. : ø23 - ø25Drift - 150mm : To hammer the socket on the wheel nut.Punch - 135mm : To remove the wheel nut out of the socket.
M2020 >Master Spindle Rethreading set - 20 Pc
M2020: 332mm(L) x 252mm(W) x 56mm(H)
This 20 Pc set will repair or renew damaged threads on stub axles/spindles on most vehicles. The dies are made from high tempered steel for strength and durability.
Content :Imperial sizes :- 11/16" x 24- 3/4" x 16- 3/4" x 20- 13/16" x 20- 27/32" x 20- 7/8" x 14- 1" x 14
Metric sizes :- 16 x 1.0- 16 x 1.5- 18 x 1.5- 19 x 1.5- 20 x 1.0- 20 x 1.25- 20 x 1.5
- 22 x 1.0- 22 x 1.5- 24 x 1.5- 24 x 2.0- 25 x 1.5- 27 x 2.0
Rethreading & Locking nut extractor set
M9414 > Adjustable ball joint splitter for use on cars andcommercial vehicle jaw opening 20-30mm.
112
AMP120310 AMP120315 AMP120720 AMP120725 AMP121230 AMP121235 AMP121240 AMP121550
3 ton 3 ton 7 ton 7 ton 12 ton 12 ton 12 ton 15 tonModel
Capacity
A (mm)B (mm)C (mm)
Weight (kg)
10095
1341.1
1001351761.3
1501602233.5
1551902503.6
2052403257.5
200350425
9
20051058515
22564071723
2 Leg Adjustable Puller
AMP230110 AMP230410 AMP230710 AMP230810
1 ton 4 ton 7 ton 8 ton Model
Capacity
A (mm)B (mm)
Weight (kg)
1201250.7
2102202.1
2702803.7
2703304.0
2/3 Leg Puller
AMPC230110 AMPC230410 AMPC230710
1 ton 4 ton 7 tonModel
Capacity
A (mm)B (mm)
Weight (kg)
1201250.8
2102202.1
2702806.7
2/3 Leg Puller Self-Centering
Pullers
The jaws have a special cut-out to pull
A
B
A
C
B
B
A
2 Leg Adjustable Pullers > Manual puller
• Adjustable in width.
2/3 Leg Pullers > Manual puller
• Can be used with either 2 or 3 jaws.• Extra long jaws adjustable in 4 positions.• The jaws have a special cut-out to pull.
2/3 Leg Self-Centering Pullers > Manual puller
113
A
C
B
B
R
A
B
C
Position to SplitPosition to Pull
Note: Be sure to use the correct position for the required action in order to avoid damaging the Splitter-Set.
AMP221102 AMPC221103 AMPC221110Model
A (mm)B Max. (mm)B Min. (mm)
C (mm)Weight (kg)
12011046
1221
12014046
1561.1
190195632103.4
Push Puller
Pullers & Splitters
APS1202 APS1203 APS1204Model
A Max. (mm)A Min. (mm)
B (mm)R
Weight (kg)
604
603/8"0.7
806
803/8"1.3
110101105/8"2.7
Splitters
AMP320202 AMP320303 AMP321004Model
A (mm)B (mm)C (mm)
1005590
10080
130
152108175
Splitters Set
< Push PullersManual puller
Splitters >Manual puller
< Splitter SetManual puller
114
M9506 > Pin Punch set - 6 Pc
Content :Pin Punch (mm) : 2x115, 3x125, 4x150
5x165, 6x180, 8x180
Material : 60SICRV(T61)
< M9009Ball End Hex Key set - 9 Pc
M9009: 200mm(L) x 70mm(W) x 30mm(H)
ContentBall End Hex Key : H1.5 - H2 - H2.5 - H3 - H4H5 - H6 - H8 - H10
Material : CR-V
< M9516 Punch & Chisel set - 16 Pc
Content :Pin Punch (mm) : 2x110, 3x120, 4x125, 5x135, 6x145Centre Punch (mm) : 3x125, 5x150Taper Punch (mm) : 2x135, 3x145, 4x150, 5x160, 6x170Chisel (mm) : 10x140, 13x150, 16x165, 19x175
Material : 60SICRV(T61)
Punch, chisel & Hex key sets
115
M1700 > Twist drill bits set - 170 Pc
Wrench, Twist drill bits & Oil drain plug key set
M0001 >Wrench with Bottle Opener - 8mm
M3817 >3/8" Dr. Oil Drain Plug Key set - 17 Pc
Content :Square (mm) : S8 - S9.5 - S10 - S10.5 - S11 - S12 - S13.1Hex : H8 - H9 - H10 - H12 - H13 - H14 - H17Triangle (mm) : XT10Square Hole (mm) : XS10Star (mm) : M16
Material : CR-V
116
< M5001 Tyre Bead Seater
Capacity : 20 LiterWeight : 11.8 kg / 26 lb
M9036 : 5/8" x 36" - 30º / 16 x 915mmM9048 : 7/8" x 48" - 30º / 22 x 1220mmM9056 : 1" x 56" - 30º / 25.4 x 1422mm
M9004 >Pry Bar set - 4 Pc
Content :L - 200 mm : 6.35 mmL - 300 mm : 9.50 mmL - 450 mm : 11.1 mmL - 560 mm : 12.7 mm
Heavy duty pry bar with textured handle and hammer cap
Tyre bead seater & Heavy duty pry bars
117
Dead blow hammer & Magnetic holders
M9911 >Magnetic Holder• Flexible shape.• Easy to use from vertical to horizontal surface.
< M9922Magnetic Holder• For (air) impact wrench & scokets, markers, torque wrench & other tools.• 400 mm Magnetic hook "O" + "U".
M9900 & M9901 >Magnetic Tool Strips• Magnetic on both sides for easy use on metal surface.• • Tools are not included.
M9900 : 300mmM9901 : 600mm
< M9930 Dead Blow Hammer - 4 kg, length 762mm
118
HR8000 >Induction Heater set• All packed in strong aluminum suitcase.• Included 5 accessories.
Voltage : 230V / 50-60Hz / 3 AmpPower : 1500W
Content :Induction coil (mm) : ø19 - ø20Induction cable (mm) : 600Induction coil : U-ShapeInduction pad (mm) : ø75
Induction heater
119
HRK8007 >Induction Heater Coil set - 7 Pc
Content :Induction coil (mm) : ø13 - ø19 - ø23 - ø26 - ø32 - ø38 - ø45
120
Hot stapler
HS7000 >
Hot Stapler set- All packed in strong aluminum suitcase.- Included 6 different type staples.
Voltage : 230V / 50-60Hz / 0.15 AmpPower : 40-50W
1
2
3
4
5
6
mm) Outside corner
mm) Large surface
mm) Stitch tears
mm) Large surface
mm) Inside corner
mm) Stitch tears
HSS7006M
HSS7006S
HSS7006Z
HSS7008S
HSS7008V
HSS7008Z
HS7000 Article nr.
121
Auto body repair tools
M9907 >Rubber Dolly set - 7 pc
M9907: 340mm(L) x 178mm(W) x 38mm(H)
ContentHeel DollyLong Type Heel DollyDouble End DollyCurved DollyUtility Dolly (General purpose dolly)Double End Hand DollyLong Type Curved Dolly
M9807 >Dolly & Hammer set - 7 pc• Full polished.• Drop forged steel dollies & hammers.
M9807: 340mm(L) x 178mm(W) x 38mm(H)
ContentStandard Bumping HammerPick & Finish HammerShrinking HammerUtility DollyCurved DollyHeel DollyToe Dolly
M9916 >Ball Pein Hammer - 685g
Hammer Head - 450gLength - 325mm
< M9924Ball Pein Hammer - 1 kg
Hammer Head - 680gLength - 384mm
122
M9999 >Mechanix Display Unit• Tools are not included.
M9999 : 945mm(L) x 500mm(W) x 2320mm(H)
Content :Back Pannel : 2320 x 945mmBottom Shelf : 915 x 385 x 32mmShelf : 915 x 385 x 32mmHooks : 50 x 3" - 50 x 4"
Optional :M9999-S : Shelf for display, included supports.M9999-03 : Box for 50 hooks - 3"M9999-04 : Box for 50 hooks - 4"
Mechanix display unit
123
124
Acc
esso
irie
s
125
Index
Jump starters & Battery charger Page 126 - 128
Work mat Page 129
Creepers Page 130
Creepers & Roller seats Page 131
Automatic tyre inflators Page 132 - 133
Industrial diesel heaters Page 134
Gas Forced heaters / LPG Page 135
LED work light Page 136
Work lights & cable reel Page 137
Oil drain pans & Recycling reservoirs Page 138
Mini air guns & Air compressor Page 139
Hand winch, Cable & Power puller Page 140
Electric winch Page 141
Spare parts Page 142 - 147
Index Page 148 - 149
126
Jump starter
IJS6000 >Intelligent Jump Start and Mobile Device Charger.
IJS6000• Start current: 300A. • Peak current: 600A.• Will start a 12V gasoline engine (up to 5 liter) with internal-
voltage of just 0.05V in a car battery.
IJS6000D• Start Current: 350A. • Peak Current: 700A.• Will start a 12V gasoline engine (up to 5.0 liter) and diesel
cars (up to 2.0 liter engine) with internal voltage of just 0.06V in a car battery.
• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 5V/2A. • Battery capacity: 6000mAh/22.2wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• Re-charge from a laptop computer or 5V USB mains charger
plug (not supplied).• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.• No electrical spiking.• Size: 130mm x 67mm x 15mm.• Weight: 170g.• Neoprene carry case included.
Scan me for demonstration video
127
Jump starter
IJS11000 >Intelligent Jump Start and Mobile Device Charger.
• Start current: 400A. • Peak current: 800A.• Will start all 12V vehicles with internal voltage of
just 0.06V in a car battery.
• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 15V/1A. • Battery capacity: 11000mAh/41wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.• No electrical spiking.• Size: 174mm x 75mm x 29mm.• Weight: 390g.• Neoprene carry case included.
128
Safety functions:• Reverse polarity protection.• Spark-proof when clips touch each other.• Short-circuit and over-charge protection.• Desulfating battery plates to extend battery lifetime and
increases ability of taking charge.• User friendly "connect & standby" operation for DC cable.• Battery maintenance/reconditioning function
• Reinforced activation function.• Battery tester for quick battery trouble shooting.• Auto wake-up function (Stage 4).• 4-Stage pulse charging.• Multiple battery charge function.• Charging rate: 2/10/20/30/40Amp.
I-7015 >Fully automatic battery charger for 12 Volt batteries
• Designed to increase battery performance and life. ACDelcoTM Charger provides battery maintenance function that may help to recondition a battery.
• Fully automatic "pulse cycle" charging.
• Charges most lead acid battery types. The ACDelcoTM Charger will charge most types of lead acid batteries plus Gell, AGM, Marine type, etc.
• The charger wakes up automatically to ‘top off’ battery when needed.
Jump starter & Battery charger
IJS8000 >Intelligent Jump Start and Mobile Device Charger
IJS8000• Start current: 370A. • Peak current: 750A.• Will start a 12V gasoline engine (up to 5 liter) with internalvoltage of just 0.05V in a car battery.• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 5V/2A. • Battery capacity: 8000mAh/22.2wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• Re-charge from a laptop computer or 5V USB mains charger plug
(not supplied).• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.
• No electrical spiking.• Size: 138mm x 76mm x 23mm.• Weight: 300g.• Neoprene carry case included.
129
C-9802 > 2 fold EVA kneel pad Size: 450 x 210 x 30mm
C-9803 >3 fold EVA work mat Size: 1210 x 420 x 30mm
< C-9806
6 fold EVA work matSize: 1210 x 420 x 30mm
Work mat
130
CP4031 >Bone-ster
Size: 1092 x 594mmThe Bone-ster double-ribbed one-piece body gives an incre-dible 182 kg capacity. The Bone-ster features strong, custom molded 7,6 cm diameter wheels with molded in place 2,25 cm wide tyres.
< CP6031The Bone Size: 1194 x 648mm
The Bone has custom-molded 13 cm diameter wheels. With 2,5 cm wide tyres. The heavy American made steel caster frames have dual-race ADJUSTABLE ball bearing swivels and are thrubolted to the creeper body. The original Bone creeper sets the standard for the highest quality, best working creeper ever made that supports users up to 136 kg less than 4,5 cm off the ground.
< CP5031The Tail BoneSize: 806 x 711 x 584mm
The Tail Bone is designed to be easier to use, more comfortable, more durable and a better value than any other mechanic's stool on the market. The extra wide (81,3 cm) uniquely designed tripod base, a naturally stable working platform, even on uneven surfaces. The entire stool swivels with your body. The Tail Bone cruises around at a low 30,5 cm off the ground, making it the perfect height for any job that requires you to get low! The Tail Bone has wide (2,5 cm) custom-molded, 13 cm diameter wheels. Capacity 159 kg.
Creepers
CP7031 >The Rough RiderSize: 1194 x 648mm
3,5 cm wide tyres for outdoor use. It also has ground clearance of 7,3 cm.
Custom-Molded Wheels
131
C-9836 >102cm (40") Professional PVC Creeper
• Six Ø 7.5cm PVC castors.• Storage compartments for tools, bolts/nuts.• Incorporated grip.• Molded to body shape for extra comfort.
CP-9605 >120cm (47") Professional Creeper
• Converts easily from creeper to seat or from seat to creeper.
• Finger safe and friendly (un-)lockingsystem.• Soft vinyl padded.• Heavy Duty Metal Frame.• Six Ø 6cm swivel castors for smooth operation.• Creeper 120cm / Seat 48cm high.
< RS-9833Pneumatic roller seat with one tray.
• Seat Ø 31cm.• Seat adjustable in height from 38-51cm.• Convenient tool tray allows you to keep what you need
within arms reach.• Extra 360° rotating tool tray for added storage space
for tools, bolts/nuts.•
360°
Creepers & Roller seats
132
TI-10711 >Max inlet air supply:10 BAR / 1000 kPa
Operating pressure:Min: 0.3 BAR / 35 kPaMax: 7.0 BAR / 700 kPa
Includes:1x controle unit.
Silencer.
Automatic tyre inflators
The Omega Mechanix ATI has special features that not only saves labor and improves the safety of your
This device is one of the safest of its kind. The OPS (Over Pressure System) is an extra feature that
pressure will go down automatically to the preset pressure.
Scan me for demonstration video
< TI-10721 / TI-11221TI-10721Max inlet air supply:10 BAR / 1000 kPa
Operating pressure:Min: 0.3 BAR / 35 kPaMax: 7.0 BAR / 700 kPa
Includes:1x controle unit.
Emergency switch equipped with 8m cable + HAN4 = 5 pin connector.Door switch equipped with 2m cable + HAN3 = 4 pin connector.Silencer.
TI-11221Max inlet air supply:15 BAR / 1500 kPa
Operating pressure:Min: 0.3 BAR / 35 kPaMax: 12.0 BAR / 1200 kPa
133
TI-00001 >• Tyre chuck.• Screw in the core valve with the tyre chuck.• No air loss / no pressure loss.• Easy and safe.
TI-00003 >• Tyre chuck with silencer. • 25% noise reduction.
Door switchTI-10721 - TI-11221 - TI-11224
Emergency switchTI-10721 - TI-11221 - TI-11224
TI-11224Max inlet air supply:15 BAR / 1500 kPa
Operating pressure:Min: 0.3 BAR / 35 kPaMax: 12.0 BAR / 1200 kPa4 outlets
Includes:1x controle unit.
Emergency switch equipped with 8m cable + HAN4 = 5 pin connector.Door switch equipped with 2m cable + HAN3 = 4 pin connector.Silencer.
Automatic tyre inflators
134
Industrial diesel heaters
< HRD70Heating output 70,000 BTUs ( 20.52 KW)Fuel consumption: 1.7 kg/h (Tank 24 L)Air output: 600 m3/h
HRD100 >Heating output 100,000 BTUs ( 29.31 KW)Fuel consumption: 2.5 kg/h (tank 24 L)Air output: 720 m3/h
• Mobile air heater. • Operate on diesel oil or kerosene.• Stainless steel combustion chamber with fan cooling.• • When out of oil, heater will cut off the power.• Fixed oil display.• Cut-off protection, re-plugged in will not work automatically.• Low pressure atomization, combustion completely.• Waterproof class IPX4.
135
Gas Forced heaters / LPG
< HRP42 Heating output 42,000 BTUs (12.31 KW) Fuel consumption: 0.74 kg/h Air output: 320 m3/h
HRP100 >Heating output 100,000 BTUs (29.31 KW)Fuel consumption: 2.18 kg/hAir output: 650 m3/h
• Portable air heater. • Operate on propane gas (LPG). • With over-heating protection. • Special nozzle, with strong oxygen supply make combustion complete. • Cut-off protection avoid gas leaking. • • Ideal for construction sites, utility/farm buildings, sports events, barns and factories.• Ignition: piezo. • 1.5m hose included.
136
LED work light
< PL-1001Rechargeable Pocket Light - SMD LED, with Magnet
• LED: 24 SMD LED, On / Off Switch with full bright, half bright light.
• Luminous Flux: 240 LM for full-bright, 120 LM for half bright.
• Battery: 3.7V, 1100mAh Lithium-Polymer battery.• Operating time: 1.5 hours for full-bright, 3 hours for
half-bright.• Charging time: 2-2.5 hours.• Protection: Overcharge, overdischarge and
auto shut off function.
OrangePL-1001/O
BlackPL-1001/B
GreenPL-1001/G
60° 60°PL-1007 >Rechargeable stripe LED Worklight
• Stripe LED.• Magnetic Base.• Provides a beam of 40 - 50 LM.• 3,6V Li-ion Battery.• Adjustable in many positions.• Charging time: Approximately 1.5 Hours.• Operating time: Approximately 3.5 Hours.
< PL-2300USB Rechargeable Multifunctional Worklight
• Comes with COB LED and UV LED.• Has a function for Low-High-UV LED.• Magnetic Base and Hook.• Provides a beam of 230 LM.• USB Recharge with a 3,7V Li-ion Battery.• Adjustable in many positions.• Charging time: Approximately 3.5 Hours.• Operating time: Approximately 3 Hours.
USB Recharge
137
LED work light & cable reel
< PL-1016LED hand lamp
• 3W COB LED hand lamp.• Provides a wide angle beam of 205 LM.• Battery: 3.7V Li-ion 2200mAh 8.14Wh.• Operating time: 3-3.5 hours.• Charging time: 4.5-5.5 hours.• The light can be charged in the charging base as
well as directly with the adaptor.• 360° swivel hanging hook / belt clip incl. magnet.
PL-1200C >Cable Reel
• Plug & Socket.• Input Cable: 1M, 3x1.5mm2.• Output Cable: 12M, 3x1.5mm2.• Voltage: AC230V 50Hz.• Maximum Load: - Coiled up 900W. - Unwound 2300W.
PL-530 >30 Watt T8 Engine Work Light Fluorescent Lamp
• Adjustable mounting clamps 1,15 – 1.80 meter.• Aluminum Frame with metal end covered by EVA.• End of light and hook are PP.• Provides 400 - 500 LM.• 5 meter cable.• 230V-50Hz, VDE Plug.•
PL-514 >13 Watt, Transistorised AC Double Fluorescent TL Work Light
• 230 Volt AC, 50Hz.• Hanging Hook.• 2 Magnetic Holders.• 5 Meter Cable.• On/Off Switch with Cover.• Water Resistant (IP44).
Magnetic Holders Included
138
Oil drain pans & recycling reservoirs
^ PO-08Oil drain pan Capacity: 8 LiterSize: 500 x 400 x 125mm Approximate (inner) diameter: 345mm
• High density polyethylene.• Large handles and integraded pouring spout.• Handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).
PO-16 >Oil drain panCapacity: 16 LiterSize: 570 x 470 x 150mmApproximate (inner) diameter: 410mm
• High density polyethylene.• Large handles and integraded pouring spout.• Handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).
< PO-10Oil recycling reservoirCapacity: 10 LiterSize: 567 x 321 x 126mm
• Double Function: Oil drain pan & recycling reservoir.• Large handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).
PO-44 >Oil recycling reservoir with wheelsCapacity: 44 LiterSize: 885 x 495 x 188mm
• Double function: Oil drain pan & recycling reservoir.• Large handles for left and right handed use.• Wheels for easy and light handling.• Multi functional (oil / antifreeze / other liquids).• Small holes under the drain cap to prevent small
parts from falling into the reservoir.
139
Mini air guns & Air compressor
PA-01 >Mini air blow gun
• Nozzle with safety tip.• • Body material: Nylon.• Nozzle material: Brass.• Working pressure: 90 PSI (0.6 MPa).• Sound level: 70 dBA.• Air consumption (90 PSI/6.2 BAR): 164 Liter/Minute.• Temperature range: - 20°C ~ 70°C.• Air inlet: 1. Thread type: 1/4"NPT or 1/4"PT. 2. Plug material: Steel.
< PA-02Mini Air Blow Gun with Turbo Tip.
• The turbo-tip creates a stronger air output.• Body material: Nylon.• Nozzle material: Brass.• Working pressure: 90 PSI (0.6 MPa).• Sound level: 83 dBA (W/O Turbo Tip: 75 dBA).• Air consumption (90 PSI/6.2 BAR): 381 Liter/Minute.• Temperature range: - 20°C ~ 70°C.• Air inlet: 1. Thread type: 1/4"NPT or 1/4"PT. 2. Plug material: Steel.
W2001 >High Flow Air Compressor.
• Pressure Max. 7 BAR (100 PSI).• Liter/Minute.• Large and powerful motor to provide robust
performance.• Supply cord with alligator clips.• Build-in pressure gauge.• Build-in amber color warning light.• ON/OFF switch for compressor and warning light.• Sturdy housing for rough usage.•
needle adaptor for sport balls.• Air hose with V8 connector.• Plug with 15A fuse for protection.• Alligator cable assembly with lighter socket.• Connect direct to the car battery.
M1401 >1/4" PT Air blow gun with quiet safety nozzle
140
Hand winch, Cable & Power puller
2119086, 2119087, 2119089 >2119089: 2000 kg Handwinch with Handbrake2119086: (not shown) 960 kg Handwinch2119087: (not shown) 1500 kg Handwinch
• Solid Gear Construction.•
resistance to corrosion and weather condition.• Internally lubricated drum and pinion gear bushings.• Precise gear tooth engagement.• Smoothly rotating handle.• Reinforcement in frame for added strength.
2119086 2119087 2119089 Max. pulling capacity 960 kg 1500 kg 2000 kgWorking capacity 320 kg 500 kg 650 kg Gear ratio 4:1 4:1 5:1/12:1Solid gear construction
Precise gear tooth engagement Gear 1 gear, 2 way, 2 gear, 2 way, 1 gear, 2 way, 1 speed design 1 speed design 2 speed designPackage 1 set/color box 1 set/color box 1 set/color box
< 211908810m wire cable
• Nominal Breaking Load: 1,905kg.• Galvanized Aircraft Cable with one forged hook.• Package: 1 Pc / plastic bag.• Diameter 5mm.• Cable Length 10m.
2119077, 2119080 >2119077: 4000 kg Double gear hand power puller2119080: 2000 kg Double gear hand power puller
• One piece body frame construction chrome/zinc plated and polished to resist rust.
• Drop forged hanging bracket swivel 360° for all positions.• Drop forged steel hook with spring safety latch.• Easy to reach cable release works one notch at a time for maximum safety.• Heavy polished steel ratchet arm for smooth non-binding operation.• Heavy-Duty stamped steel provides added strength in ratchet wheel,
drive pawl and stop pawl.• Heat treated heavy-duty bolts in handle & body.• Heavy-Duty galvanized aircraft cable.• Heavy-Duty metal safety shield.
141
Electric winch
U0705 >Electric WinchRolling Load Capacity 5000 kg (double line) / 3000 kg (single line)
Rated Single PullFirst Layer 560 kgHalf Spool 410 kgFull Spool 230 kgSingle Line SpeedFull load - 35cm/minNo load - 85cm/min
FEATURES:• Wide outdoor applications - Boat launching, lawn and garden work or
vehicle emergency use.• Capable of handling rolling loads up to a capacity of 3.000 kg. Maximum
rolling loads of 500 kg at 45° upward.• Mechanical self-brake system automatically brings winch to a standstill
when winch is set off.•
sustaining rated load.• Standby emergency hand crank equipped for use on low battery occasion.• Optional pulley block available for handling rolling load up to 5.000 kg.• Cable length 13m.
142
Spare parts
M0003 Page 86
1/4" Stubby Ratchet / 72T / 95mm
3/8" Stubby Ratchet / 72T / 115mm
1/2" Stubby Ratchet / 72T / 150mm
DR14-HDRQ-72T95L
DR38-HDRQ-72T115L
DR12-HDRQ-72T150L
Description Article Number
M030N, M110N, M210N,
M500N, M1000N, M1500N
Repair kit for M030N (MOT)
Repair kit for M030N (NTP)
Repair kit for M110N (MOT)
Repair kit for M210N (MOT) type
Repair kit for M210N (NTP) type
Repair kit for M500N (NTP)
Repair kit for M1000N/M1500N (NTP)
M030N-RPK-MOT
M030N-RPK-NTP
M110N-RPK-MOT
M210N-RPK-MOT
M210N-RPK-NTP
M500N-RPK-NTP
M1000N-RPK-NTP
Description Article Number
N, M500N:
nts L (mm)Nm 285
Nm 365Nm 518
0Nm 865
Lock
Unlock
Quick Lock/Unlock Function
M030N 1/4” Drive
M110N 3/8” Drive
M210N 1/2” Drive
M500N 3/4” Drive
Page 96
97
M0060 Page 110
Bit Adapter for M0060 - 1/2"x10mmx36L
Bit Adapter for M0060 - 1/2"x14mmx38L
Bit Adapter for M0060 - 3/8"x10mmx29L
Impact Adapter for M0060 -
10x14mmx43L
Bit for M0060 - 14mmxH14x30L/Hex
Bit for M0060 - 14mmxH17x30L/Hex
Bit for M0060 - 14mmxM12x75L/Ribe
Bit for M0060 - 14mmxM14x75L/Spline
Bit for M0060 - 14mmxM16x75L/Spline
Tamperproof
Bit for M0060 - 3/8"x10mmx75L/Square
Bit for M0060 - 3/8"x3/8"x75L/Hex
Bit for M0060 - 3/8"x8mmx75L/Square
Bit for M0060 - 3/8"xH10x30L/Hex
Bit for M0060 - 3/8"xH10x75L/Hex
Bit for M0060 - 3/8"xH12x30L/Hex
Bit for M0060 - 3/8"xH12x75L/Hex
Bit for M0060 - 3/8"xH4x30L/Hex
Bit for M0060 - 3/8"xH4x75L/Hex
Bit for M0060 - 3/8"xH5x30L/Hex
Bit for M0060 - 3/8"xH5x75L/Hex
Bit for M0060 - 3/8"xH6x30L/Hex
Bit for M0060 - 3/8"xH6x75L/Hex
Bit for M0060 - 3/8"xH7x30L/Hex
Bit for M0060 - 3/8"xH7x75L/Hex
Bit for M0060 - 3/8"xH8x30L/Hex
Bit for M0060 - 3/8"xH8x75L/Hex
Bit for M0060 - 3/8"xH9x75L/Hex
Bit for M0060 - 3/8"xM10x30L/Spline
Bit for M0060 - 3/8"xM10x75L/Ribe
Bit for M0060 - 3/8"xM10x75L/Spline
Bit for M0060 - 3/8"xM12x30L/Spline
Bit for M0060 - 3/8"xM12x75L/Spline
Bit for M0060 - 3/8"xM5x30L/Spline
Bit for M0060 - 3/8"xM5x75L/Spline
Bit for M0060 - 3/8"xM6x30L/Spline
Bit for M0060 - 3/8"xM6x75L/Ribe
Bit for M0060 - 3/8"xM6x75L/Spline
Bit for M0060 - 3/8"xM7x75L/Ribe
Bit for M0060 - 3/8"xM8x30L/Spline
Bit for M0060 - 3/8"xM8x75L/Ribe
Bit for M0060 - 3/8"xM8x75L/Spline
Bit for M0060 - 3/8"xM9x75L/Spline
Bit for M0060 - 3/8"xT20x30L/Torx
Bit for M0060 - 3/8"xT20x75L/Torx
Bit for M0060 - 3/8"xT25x30L/Torx
Bit for M0060 - 3/8"xT25x75L/Torx
Bit for M0060 - 3/8"xT27x30L/Torx
Bit for M0060 - 3/8"xT27x75L/Torx
Bit for M0060 - 3/8"xT30x30L/Torx
Bit for M0060 - 3/8"xT30x75L/Torx
Bit for M0060 - 3/8"xT40x30L/Torx
Bit for M0060 - 3/8"xT40x75L/Torx
Description Article Number
M0060 Page 110
DR12-ADBI-6P1036L
DR12-ADBI-6P1438L
DR38-ADBI-6P1029L
NT38-ADBI-6P1443LIMP
BT916-BITS-H1430LCRV
BT916-BITS-H1730LCRV
BT916-BITS-R1275LCRV
BT916-BITS-SP1475LCRV
BT916-BITS-SP1675LCRV
BT38-BITS-SQ1075LCRV
BT38-BITS-38BT75LCRV
BT38-BITS-SQ0875LCRV
BT38-BITS-H1030LCRV
BT38-BITS-H1075LCRV
BT38-BITS-H1230LCRV
BT38-BITS-H1275LCRV
BT38-BITS-H0430LCRV
BT38-BITS-H0475LCRV
BT38-BITS-H0530LCRV
BT38-BITS-H0575LCRV
BT38-BITS-H0630LCRV
BT38-BITS-H0675LCRV
BT38-BITS-H0730LCRV
BT38-BITS-H0775LCRV
BT38-BITS-H0830LCRV
BT38-BITS-H0875LCRV
BT38-BITS-H0975LCRV
BT38-BITS-SP1030LCRV
BT38-BITS-R1075LCRV
BT38-BITS-SP1075LCRV
BT38-BITS-SP1230LCRV
BT38-BITS-SP1275LCRV
BT38-BITS-SP0530LCRV
BT38-BITS-SP0575LCRV
BT38-BITS-SP0630LCRV
BT38-BITS-R0675LCRV
BT38-BITS-SP0675LCRV
BT38-BITS-R0775LCRV
BT38-BITS-SP0830LCRV
BT38-BITS-R0875LCRV
BT38-BITS-SP0875LCRV
BT38-BITS-SP0975LCRV
BT38-BITS-T2030LCRV
BT38-BITS-T2075LCRV
BT38-BITS-T2530LCRV
BT38-BITS-T2575LCRV
BT38-BITS-T2730LCRV
BT38-BITS-T2775LCRV
BT38-BITS-T3030LCRV
BT38-BITS-T3075LCRV
BT38-BITS-T4030LCRV
BT38-BITS-T4075LCRV
BT38-BITS-T4530LCRV
BT38-BITS-T4575LCRV
BT38-BITS-T5030LCRV
BT38-BITS-T5075LCRV
BT38-BITS-T5530LCRV
BT38-BITS-T5575LCRV
BT38-BITS-T6030LCRV
BT38-BITS-T6075LCRV
M0060-BMC
Description Article Number
Bit for M0060 - 3/8"xT45x30L/Torx
Bit for M0060 - 3/8"xT45x75L/Torx
Bit for M0060 - 3/8"xT50x30L/Torx
Bit for M0060 - 3/8"xT50x75L/Torx
Bit for M0060 - 3/8"xT55x30L/Torx
Bit for M0060 - 3/8"xT55x75L/Torx
Bit for M0060 - 3/8"xT60x30L/Torx
Bit for M0060 - 3/8"xT60x75L/Torx
Blow Mold Case for M0060
M1210 Page 84
1/2" Dr. Extension Bar/Wobble -
5"/125mm
1/2" Dr. Extension Bar/Wobble -
10"/250mm
1/2" Dr. Extension Bar/Wobble -
2"/50mm
1/4" Dr. Extension Bar/Wobble -
4"/100mm
1/4" Dr. Extension Bar/Wobble -
9"/225mm
1/4" Dr. Extension Bar/Wobble -
2"/50mm
3/8" Dr. Extension Bar/Wobble -
6"/150mm
3/8" Dr. Extension Bar/Wobble -
9"/225mm
3/8" Dr. Extension Bar/Wobble -
3"/75mm
DR12-BARE-125LW
DR12-BARE-250LW
DR12-BARE-50LW
DR14-BARE-100LW
DR14-BARE-225LW
DR14-BARE-50LW
DR38-BARE-150LW
DR38-BARE-225LW
DR38-BARE-75LW
Description Article Number
143
Spare parts
M1297 Page 77
1/2" Dr. Shank Bit Adapter 5/16"
3-way Adapter - 3/8"F x 1/2"M
3-way Adapter - 3/8"F x 1/4"M
1/2" Dr. Extension Bar - 5"/125mm
1/2" Dr. Extension Bar - 10"/250mm
1/4" Dr. Extension Bar - 6"/150mm
1/4" Dr. Extension Bar - 2"/50mm
1/4" Bit Socket - Hex/3mm
1/4" Bit Socket - Hex/4mm
1/4" Bit Socket - Hex/5mm
1/4" Bit Socket - Hex/6mm
1/4" Bit Socket - Hex/8mm
1/4" Bit Socket - Philips/#1
1/4" Bit Socket - Philips/#2
1/4" Bit Socket - Pozi/#1
1/4" Bit Socket - Pozi/#2
1/4" Bit Socket - Slotted/4mm
1/4" Bit Socket - Slotted/5.5mm
1/4" Bit Socket - Slotted/6.5mm
1/4" Bit Socket - Torx Tamperproof/T10
1/4" Bit Socket - Torx Tamperproof/T15
1/4" Bit Socket - Torx Tamperproof/T20
1/4" Bit Socket - Torx Tamperproof/T25
1/4" Bit Socket - Torx Tamperproof/T27
1/4" Bit Socket - Torx Tamperproof/T30
1/4" Bit Socket - Torx Tamperproof/T40
5/16" Shank Bit - Hex/10mm
5/16" Shank Bit - Hex/12mm
5/16" Shank Bit - Hex/14mm
5/16" Shank Bit - Philips/#3
5/16" Shank Bit - Philips/#4
5/16" Shank Bit - Pozi/#3
5/16" Shank Bit - Pozi/#4
5/16" Shank Bit - Slotted/8mm
5/16" Shank Bit - Slotted/10mm
5/16" Shank Bit - Slotted/12mm
5/16" Shank Bit - Torx Tamperproof/T40
5/16" Shank Bit - Torx Tamperproof/T50
5/16" Shank Bit - Torx Tamperproof/T55
1/2" Dr. Ratchet Handle - 72 Teeth/
Quick Release
1/4" Dr. Ratchet Handle - 72 Teeth/
Quick Release
1/4" Dr. Spinner Handle - 150mm
1/2" Dr. Universal Joint
1/4" Dr. Universal joint
1/2" Dr. Deep Socket - 14mm/6P
1/2" Dr. Deep Socket - 15mm/6P
1/2" Dr. Deep Socket - 17mm/6P
1/2" Dr. Deep Socket - 19mm/6P
1/2" Dr. E-Socket - E12/6P
1/2" Dr. E-Socket - E14/6P
1/2" Dr. E-Socket - E16/6P
1/2" Dr. E-Socket - E18/6P
Description Article Number
M1297 Page 77
1/2" Dr. E-Socket - E20/6P
1/2" Dr. Socket - 10mm/6P
1/2" Dr. Socket - 11mm/6P
1/2" Dr. Socket - 12mm/6P
1/2" Dr. Socket - 13mm/6P
1/2" Dr. Socket - 14mm/6P
1/2" Dr. Socket - 15mm/6P
1/2" Dr. Socket - 16mm/6P
1/2" Dr. Socket - 17mm/6P
1/2" Dr. Socket - 18mm/6P
1/2" Dr. Socket - 19mm/6P
1/2" Dr. Socket - 20mm/6P
1/2" Dr. Socket - 21mm/6P
1/2" Dr. Socket - 22mm/6P
1/2" Dr. Socket - 24mm/6P
1/2" Dr. Socket - 27mm/6P
1/2" Dr. Socket - 30mm/6P
1/2" Dr. Socket - 32mm/6P
1/2" Dr. Spark Plug Socket - 16mm/6P
1/2" Dr. Spark Plug Socket - 21mm/6P
1/4" Dr. Deep Socket - 6mm/6P
1/4" Dr. Deep Socket - 7mm/6P
1/4" Dr. Deep Socket - 8mm/6P
1/4" Dr. Deep Socket - 9mm/6P
1/4" Dr. Deep Socket - 10mm/6P
1/4" Dr. Deep Socket - 11mm/6P
1/4" Dr. Deep Socket - 12mm/6P
1/4" Dr. Deep Socket - 13mm/6P
1/" Dr. E-Socket - E6/6P
1/" Dr. E-Socket - E7/6P
1/" Dr. E-Socket - E8/6P
1/" Dr. E-Socket - E10/6P
1/" Dr. E-Socket - E11/6P
1/4" Dr. Socket - 4mm/6P
1/4" Dr. Socket - 4.5mm/6P
1/4" Dr. Socket - 5mm/6P
1/4" Dr. Socket - 5.5mm/6P
1/4" Dr. Socket - 6mm/6P
1/4" Dr. Socket - 7mm/6P
1/4" Dr. Socket - 8mm/6P
1/4" Dr. Socket - 9mm/6P
1/4" Dr. Socket - 10mm/6P
1/4" Dr. Socket - 11mm/6P
1/4" Dr. Socket - 12mm/6P
1/4" Dr. Socket - 13mm/6P
DR12-SCKE-6P2078LCRV
DR12-SCKT-6P1038LCRV
DR12-SCKT-6P1138LCRV
DR12-SCKT-6P1238LCRV
DR12-SCKT-6P1338LCRV
DR12-SCKT-6P1438LCRV
DR12-SCKT-6P1538LCRV
DR12-SCKT-6P1638LCRV
DR12-SCKT-6P1738LCRV
DR12-SCKT-6P1838LCRV
DR12-SCKT-6P1938LCRV
DR12-SCKT-6P2038LCRV
DR12-SCKT-6P2138LCRV
DR12-SCKT-6P2238LCRV
DR12-SCKT-6P2440LCRV
DR12-SCKT-6P2744LCRV
DR12-SCKT-6P3044LCRV
DR12-SCKT-6P3244LCRV
DR12-SCSP-6P1265LCRV
DR12-SCSP-6P2165LCRV
DR14-SCKD-6P0650LCRV
DR14-SCKD-6P0750LCRV
DR14-SCKD-6P0850LCRV
DR14-SCKD-6P0950LCRV
DR14-SCKD-6P1050LCRV
DR14-SCKD-6P1150LCRV
DR14-SCKD-6P1250LCRV
DR14-SCKD-6P1350LCRV
DR14-SCKE-6P0625LCRV
DR14-SCKE-6P0725LCRV
DR14-SCKE-6P0825LCRV
DR14-SCKE-6P1025LCRV
DR14-SCKE-6P1125LCRV
DR14-SCKT-6P0425LCRV
DR14-SCKT-6P04H25L-
CRV
DR14-SCKT-6P0525LCRV
DR14-SCKT-6P05H25L-
CRV
DR14-SCKT-6P0625LCRV
DR14-SCKT-6P0725LCRV
DR14-SCKT-6P0825LCRV
DR14-SCKT-6P0925LCRV
DR14-SCKT-6P1025LCRV
DR14-SCKT-6P1125LCRV
DR14-SCKT-6P1225LCRV
DR14-SCKT-6P1325LCRV
Description Article Number
DR12-ADBI-516BT38L
DR38-AD3W-12M44L
DR38-AD3W-14M28L
DR12-BARE-125L
DR12-BARE-250L
DR14-BARE-150L
DR14-BARE-50L
DR14-BISK-H0337L
DR14-BISK-H0437L
DR14-BISK-H0537L
DR14-BISK-H0637L
DR14-BISK-H0837L
DR14-BISK-PH0137L
DR14-BISK-PH0237L
DR14-BISK-PZ0137L
DR14-BISK-PZ0237L
DR14-BISK-S0437L
DR14-BISK-S05H37L
DR14-BISK-S06H37L
DR14-BISK-TT1037L
DR14-BISK-TT1537L
DR14-BISK-TT2037L
DR14-BISK-TT2537L
DR14-BISK-TT2737L
DR14-BISK-TT3037
DR14-BISK-TT4037L
BT516-BITS-H1030LSHK
BT516-BITS-H1230LSHK
BT516-BITS-H1430LSHK
BT516-BITS-PH0330LSHK
BT516-BITS-PH0430LSHK
BT516-BITS-PZ0330LSHK
BT516-BITS-PZ0430LSHK
BT516-BITS-S0830LSHK
BT516-BITS-S1030LSHK
BT516-BITS-S1230LSHK
BT516-BITS-TT4030LSHK
BT516-BITS-TT5030LSHK
BT516-BITS-TT5530LSHK
M0137, M0120,
M0121
M0135, M0140,
M0141
DR14-HDSP-150L
DR12-JTUN-72L
DR14-JTUN-37L
DR12-SCKD-6P1477LCRV
DR12-SCKD-6P1577LCRV
DR12-SCKD-6P1777LCRV
DR12-SCKD-6P1977LCRV
DR12-SCKE-6P1278LCRV
DR12-SCKE-6P1478LCRV
DR12-SCKE-6P1678LCRV
DR12-SCKE-6P1878LCRV
M1228 Page 78
3-way Adapter - 3/8"Fx1/2"M
1/2" Dr. Extension Bar - 5"/125mm
1/2" Dr. Extension Bar - 10"/250mm
1/2" Dr. Ratchet Handle - 72Teeth/
Quick Release
1/2" Dr. Universal Joint
1/2" Dr. Deep Socket - 14mm/6P
1/2" Dr. Deep Socket - 15mm/6P
1/2" Dr. Deep Socket - 17mm/6P
1/2" Dr. Deep Socket - 19mm/6P
1/2" Dr. Socket - 10mm/6P
1/2" Dr. Socket - 11mm/6P
1/2" Dr. Socket - 12mm/6P
1/2" Dr. Socket - 13mm/6P
1/2" Dr. Socket - 14mm/6P
1/2" Dr. Socket - 15mm/6P
1/2" Dr. Socket - 16mm/6P
1/2" Dr. Socket - 17mm/6P
1/2" Dr. Socket - 18mm/6P
1/2" Dr. Socket - 19mm/6P
1/2" Dr. Socket - 20mm/6P
1/2" Dr. Socket - 21mm/6P
1/2" Dr. Socket - 22mm/6P
1/2" Dr. Socket - 24mm/6P
1/2" Dr. Socket - 27mm/6P
1/2" Dr. Socket - 30mm/6P
1/2" Dr. Socket - 32mm/6P
1/2" Dr. Spark Plug Socket - 16mm/6P
1/2" Dr. Spark Plug Socket - 21mm/6P
DR38-AD3W-12M44L
DR12-BARE-125L
DR12-BARE-250L
M0137, M0120,
M0121
DR12-JTUN-72L
DR12-SCKD-6P1477LCRV
DR12-SCKD-6P1577LCRV
DR12-SCKD-6P1777LCRV
DR12-SCKD-6P1977LCRV
DR12-SCKT-6P1038LCRV
DR12-SCKT-6P1138LCRV
DR12-SCKT-6P1238LCRV
DR12-SCKT-6P1338LCRV
DR12-SCKT-6P1438LCRV
DR12-SCKT-6P1538LCRV
DR12-SCKT-6P1638LCRV
DR12-SCKT-6P1738LCRV
DR12-SCKT-6P1838LCRV
DR12-SCKT-6P1938LCRV
DR12-SCKT-6P2038LCRV
DR12-SCKT-6P2138LCRV
DR12-SCKT-6P2238LCRV
DR12-SCKT-6P2440LCRV
DR12-SCKT-6P2744LCRV
DR12-SCKT-6P3044LCRV
DR12-SCKT-6P3244LCRV
DR12-SCSP-6P1265LCRV
DR12-SCSP-6P2165LCRV
Description Article Number
M1234 Page 84
Socket Adapter 1/2"F-3/4"M for M1234
Socket Adapter 3/4"F-1/2"M for M1234
Socket Adapter 1/2"F-3/8"M for M1234
Socket Adapter 1/4"F-3/8"M for M1234
Socket Adapter 3/8"F-1/4"M for M1234
Socket Adapter 3/8"F-1/2"M for M1234
DR12-ADSK-34DRCRV
DR34-ADSK-12DRCRV
DR12-ADSK-38DRCRV
DR14-ADSK-38DRCRV
DR38-ADSK-14DRCRV
DR38-ADSK-12DRCRV
Description Article Number
144
Spare parts
M1395 Page 76
3-Way Adapter - 1/2"F x 3/8"M
1/4" Dr. Bit Adapter - 1/4"/25L
3-way Adapter - 3/8"Fx1/4"M
1/4" Dr. Extension Bar - 6"/150mm
1/4" Dr. Extension Bar - 2"/50mm
3/8" Dr. Extension Bar - 6"/150mm
3/8" Dr. Extension Bar - 3"/75mm
3/8" Bit Socket - Hex/3mm
3/8" Bit Socket - Hex/4mm
3/8" Bit Socket - Hex/5mm
3/8" Bit Socket - Hex/6mm
3/8" Bit Socket - Hex/7mm
3/8" Bit Socket - Hex/8mm
3/8" Bit Socket - Hex/10mm
3/8" Bit Socket - Philips/#1
3/8" Bit Socket - Philips/#2
3/8" Bit Socket - Philips/#3
3/8" Bit Socket - Pozi/#1
3/8" Bit Socket - Pozi/#2
3/8" Bit Socket - Slotted/5.5mm
3/8" Bit Socket - Slotted/6.5mm
3/8" Bit Socket - Torx Tamperproof/T10
3/8" Bit Socket - Torx Tamperproof/T15
3/8" Bit Socket - Torx Tamperproof/T20
3/8" Bit Socket - Torx Tamperproof/T25
3/8" Bit Socket - Torx Tamperproof/T30
3/8" Bit Socket - Torx Tamperproof/T40
3/8" Bit Socket - Torx Tamperproof/T45
3/8" Bit Socket - Torx Tamperproof/T50
3/8" Bit Socket - Torx Tamperproof/T55
1/4" Bit - Hex/3mm
1/4" Bit - Hex/4mm
1/4" Bit - Hex/5mm
1/4" Bit - Hex/6mm
1/4" Bit - Philips/#1
1/4" Bit - Philips/#2
1/4" Bit - Pozi/#1
1/4" Bit - Pozi/#2
1/4" Bit - Slotted/4mm
1/4" Bit - Slotted/5.5mm
1/4" Bit - Torx Tamperproof/T10
1/4" Bit - Torx Tamperproof/T15
1/4" Bit - Torx Tamperproof/T20
1/4" Bit - Torx Tamperproof/T25
1/4" Bit - Torx Tamperproof/T27
1/4" Bit - Torx Tamperproof/T30
1/4" Dr. Ratchet Handle - 72 Teeth/
Quick Release
3/8" Dr. Ratchet Handle - 72 Teeth/
Quick Release
1/4" Dr. Spinner Handle - 150mm
1/4" Dr. Universal joint
3/8" Dr. Universal Joint
1/4" Dr. Deep Socket - 6mm/6P
Description Article Number
DR12-AD3W-38M40L
DR14-ADBI-14BT25L
DR38-AD3W-14M28L
DR14-BARE-150L
DR14-BARE-50L
DR38-BARE-150L
DR38-BARE-75L
DR38-BISK-H0348L
DR38-BISK-H0448L
DR38-BISK-H0548L
DR38-BISK-H0648L
DR38-BISK-H0748L
DR38-BISK-H0848L
DR38-BISK-H1048L
DR38-BISK-PH0148L
DR38-BISK-PH0248L
DR38-BISK-PH0348L
DR38-BISK-PZ0148L
DR38-BISK-PZ0248L
DR38-BISK-S05H48L
DR38-BISK-S06H48L
DR38-BISK-TT1048L
DR38-BISK-TT1548L
DR38-BISK-TT2048L
DR38-BISK-TT2548L
DR38-BISK-TT3048L
DR38-BISK-TT4048L
DR38-BISK-TT4548L
DR38-BISK-TT5048L
DR38-BISK-TT5548L
BT14-BITS-H0330L
BT14-BITS-H0430L
BT14-BITS-H0530L
BT14-BITS-H0630L
BT14-BITS-PH0130L
BT14-BITS-PH0230L
BT14-BITS-PZ0130L
BT14-BITS-PZ0230L
BT14-BITS-S0430L
BT14-BITS-S05H30L
BT14-BITS-TT1030L
BT14-BITS-TT1530L
BT14-BITS-TT2030L
BT14-BITS-TT2530L
BT14-BITS-TT2730L
BT14-BITS-TT3030L
M0135, M0140,
M0141
M0136, M0380,
M0381
DR14-HDSP-150L
DR14-JTUN-37L
DR38-JTUN-58L
DR14-SCKD-6P0650LCRV
M1395 Page 76
1/4" Dr. Deep Socket - 7mm/6P
1/4" Dr. Deep Socket - 8mm/6P
1/4" Dr. Deep Socket - 9mm/6P
1/4" Dr. Deep Socket - 10mm/6P
1/4" Dr. Deep Socket - 11mm/6P
1/4" Dr. Deep Socket - 12mm/6P
1/4" Dr. Deep Socket - 13mm/6P
1/4" Dr. Socket - 4mm/6P
1/4" Dr. Socket - 4.5mm/6P
1/4" Dr. Socket - 5mm/6P
1/4" Dr. Socket - 5.5mm/6P
1/4" Dr. Socket - 6mm/6P
1/4" Dr. Socket - 7mm/6P
1/4" Dr. Socket - 8mm/6P
1/4" Dr. Socket - 9mm/6P
1/4" Dr. Socket - 10mm/6P
1/4" Dr. Socket - 11mm/6P
1/4" Dr. Socket - 12mm/6P
1/4" Dr. Socket - 13mm/6P
3/8" Dr. Deep Socket - 10mm/6P
3/8" Dr. Deep Socket - 12mm/6P
3/8" Dr. Deep Socket - 13mm/6P
3/8" Dr. Deep Socket - 15mm/6P
3/8" Dr. Deep Socket - 17mm/6P
3/8" Dr. Socket - 6mm/6P
3/8" Dr. Socket - 7mm/6P
3/8" Dr. Socket - 8mm/6P
3/8" Dr. Socket - 9mm/6P
3/8" Dr. Socket - 10mm/6P
3/8" Dr. Socket - 11mm/6P
3/8" Dr. Socket - 12mm/6P
3/8" Dr. Socket - 13mm/6P
3/8" Dr. Socket - 14mm/6P
3/8" Dr. Socket - 15mm/6P
3/8" Dr. Socket - 16mm/6P
3/8" Dr. Socket - 17mm/6P
3/8" Dr. Socket - 18mm/6P
3/8" Dr. Socket - 19mm/6P
3/8" Dr. Socket - 20mm/6P
3/8" Dr. Socket - 21mm/6P
3/8" Dr. Socket - 22mm/6P
3/8" Dr. Spark Plug Socket - 16mm
3/8" Dr. Spark Plug Socket - 21mm
DR14-SCKD-6P0750LCRV
DR14-SCKD-6P0850LCRV
DR14-SCKD-6P0950LCRV
DR14-SCKD-6P1050LCRV
DR14-SCKD-6P1150LCRV
DR14-SCKD-6P1250LCRV
DR14-SCKD-6P1350LCRV
DR14-SCKT-6P0425LCRV
DR14-SCKT-6P04H25L-
CRV
DR14-SCKT-6P0525LCRV
DR14-SCKT-6P05H25L-
CRV
DR14-SCKT-6P0625LCRV
DR14-SCKT-6P0725LCRV
DR14-SCKT-6P0825LCRV
DR14-SCKT-6P0925LCRV
DR14-SCKT-6P1025LCRV
DR14-SCKT-6P1125LCRV
DR14-SCKT-6P1225LCRV
DR14-SCKT-6P1325LCRV
DR38-SCKD-6P1062L
DR38-SCKD-6P1262L
DR38-SCKD-6P1362L
DR38-SCKD-6P1562L
DR38-SCKD-6P1762L
DR38-SCKT-6P0628L
DR38-SCKT-6P0728L
DR38-SCKT-6P0828L
DR38-SCKT-6P0928L
DR38-SCKT-6P1028L
DR38-SCKT-6P1128L
DR38-SCKT-6P1228L
DR38-SCKT-6P1328L
DR38-SCKT-6P1428L
DR38-SCKT-6P1528L
DR38-SCKT-6P1628L
DR38-SCKT-6P1730L
DR38-SCKT-6P1830L
DR38-SCKT-6P1930L
DR38-SCKT-6P2030L
DR38-SCKT-6P2130L
DR38-SCKT-6P2230L
DR38-SCSP-6P1665L
DR38-SCSP-6P2165L
Description Article Number
M1443 Page 74
1/4" Dr. Bit Adapter - 1/4"/25L
3-way Adapter - 3/8"Fx1/4"M
1/4" Dr. Extension Bar - 6"/150mm
1/4" Dr. Extension Bar - 2"/50mm
1/4" Bit - Hex/3mm
1/4" Bit - Hex/4mm
1/4" Bit - Hex/5mm
1/4" Bit - Hex/6mm
1/4" Bit - Philips/#1
1/4" Bit - Philips/#2
1/4" Bit - Pozi/#1
1/4" Bit - Pozi/#2
1/4" Bit - Slotted/4mm
1/4" Bit - Slotted/5.5mm
1/4" Bit - Torx Tamperproof/T10
1/4" Bit - Torx Tamperproof/T15
1/4" Bit - Torx Tamperproof/T20
1/4" Bit - Torx Tamperproof/T25
1/4" Bit - Torx Tamperproof/T27
1/4" Bit - Torx Tamperproof/T30
1/4" Dr. Ratchet Handle - 72 Teeth/
Quick Release
1/4" Dr. Spinner Handle - 150mm
1/4" Dr. Universal joint
1/4" Dr. Deep Socket - 6mm/6P
1/4" Dr. Deep Socket - 7mm/6P
1/4" Dr. Deep Socket - 8mm/6P
1/4" Dr. Deep Socket - 9mm/6P
1/4" Dr. Deep Socket - 10mm/6P
1/4" Dr. Deep Socket - 11mm/6P
1/4" Dr. Deep Socket - 12mm/6P
1/4" Dr. Deep Socket - 13mm/6P
1/4" Dr. Socket - 4mm/6P
1/4" Dr. Socket - 4.5mm/6P
1/4" Dr. Socket - 5mm/6P
1/4" Dr. Socket - 5.5mm/6P
1/4" Dr. Socket - 6mm/6P
1/4" Dr. Socket - 7mm/6P
1/4" Dr. Socket - 8mm/6P
1/4" Dr. Socket - 9mm/6P
1/4" Dr. Socket - 10mm/6P
1/4" Dr. Socket - 11mm/6P
1/4" Dr. Socket - 12mm/6P
1/4" Dr. Socket - 13mm/6P
DR14-ADBI-14BT25L
DR38-AD3W-14M28L
DR14-BARE-150L
DR14-BARE-50L
BT14-BITS-H0330L
BT14-BITS-H0430L
BT14-BITS-H0530L
BT14-BITS-H0630L
BT14-BITS-PH0130L
BT14-BITS-PH0230L
BT14-BITS-PZ0130L
BT14-BITS-PZ0230L
BT14-BITS-S0430L
BT14-BITS-S05H30L
BT14-BITS-TT1030L
BT14-BITS-TT1530L
BT14-BITS-TT2030L
BT14-BITS-TT2530L
BT14-BITS-TT2730L
BT14-BITS-TT3030L
M0135, M0140,
M0141
DR14-HDSP-150L
DR14-JTUN-37L
DR14-SCKD-6P0650LCRV
DR14-SCKD-6P0750LCRV
DR14-SCKD-6P0850LCRV
DR14-SCKD-6P0950LCRV
DR14-SCKD-6P1050LCRV
DR14-SCKD-6P1150LCRV
DR14-SCKD-6P1250LCRV
DR14-SCKD-6P1350LCRV
DR14-SCKT-6P0425LCRV
DR14-SCKT-6P04H25L-
CRV
DR14-SCKT-6P0525LCRV
DR14-SCKT-6P05H25L-
CRV
DR14-SCKT-6P0625LCRV
DR14-SCKT-6P0725LCRV
DR14-SCKT-6P0825LCRV
DR14-SCKT-6P0925LCRV
DR14-SCKT-6P1025LCRV
DR14-SCKT-6P1125LCRV
DR14-SCKT-6P1225LCRV
DR14-SCKT-6P1325LCRV
Description Article Number
145
Spare parts
M2435 Page 85
1/4" Dr. Socket - 4mm/6P/CR-V Matted
1/4"Dr. Socket - 4.5mm/6P/CR-V Matted
1/4" Dr. Socket - 5mm/6P/CR-V Matted
1/4"Dr. Socket - 5.5mm/6P/CR-V Matted
1/4" Dr. Socket - 6mm/6P/CR-V Matted
1/4" Dr. Socket - 7mm/6P/CR-V Matted
1/4" Dr. Socket - 8mm/6P/CR-V Matted
1/4" Dr. Socket - 9mm/6P/CR-V Matted
1/4" Dr. Socket - 10mm/6P/CR-V Matted
1/4" Dr. Socket - 11mm/6P/CR-V Matted
1/4" Dr. Socket - 12mm/6P/CR-V Matted
1/4" Dr. Socket - 13mm/6P/CR-V Matted
1/4" Bit - Philips/#1
1/4" Bit - Philips/#2
1/4" Bit - Philips/#3
1/4" Bit - Pozi/#1
1/4" Bit - Pozi/#2
1/4" Bit - Pozi/#3
1/4" Bit - Slotted/4mm
1/4" Bit - Slotted/5.5mm
1/4" Bit - Slotted/6.5mm
1/4" Bit - Trox Tamperproof/T10
1/4" Bit - Trox Tamperproof/T15
1/4" Bit - Trox Tamperproof/T20
1/4" Bit - Trox Tamperproof/T25
1/4" Bit - Trox Tamperproof/T27
1/4" Bit - Trox Tamperproof/T30
1/4" Bit - Hex/3mm
1/4" Bit - Hex/4mm
1/4" Bit - Hex/5mm
1/4" Bit - Hex/6mm
1/4" Bit - Hex/8mm
1/4" Dr. Ratchet Handle - Reversible/
Quick Release - 72 Teeth/Double Dr.&Bit
1/4" Dr. Adapter - 1/4"Bit/CR-V Matted
1/4" Dr. Extension Bar - 4"/100mm/
CM-V Matted
DR14-SCKT-6P0425LVM
DR14-SCKT-6P04H25LVM
DR14-SCKT-6P0525LVM
DR14-SCKT-6P05H25LVM
DR14-SCKT-6P0625LVM
DR14-SCKT-6P0725LVM
DR14-SCKT-6P0825LVM
DR14-SCKT-6P0925LVM
DR14-SCKT-6P1025LVM
DR14-SCKT-6P1125L-VM
DR14-SCKT-6P1225LVM
DR14-SCKT-6P1325LVM
BT14-BITS-PH0125L
BT14-BITS-PH0225L
BT14-BITS-PH0325L
BT14-BITS-PZ0125L
BT14-BITS-PZ0225L
BT14-BITS-PZ0325L
BT14-BITS-S0425L
BT14-BITS-S05H25L
BT14-BITS-S06H25L
BT14-BITS-TT1025L
BT14-BITS-TT1525L
BT14-BITS-TT2025L
BT14-BITS-TT2525L
BT14-BITS-TT2725L
BT14-BITS-TT3025L
BT14-BITS-H0325L
BT14-BITS-H0425L
BT14-BITS-H0525L
BT14-BITS-H0625L
BT14-BITS-H0825L
DR14-HDRQ-72T14BT
DR14-ADBI-14BTVM
DR14-BARE-100LVM
Description Article Number
M3316 Page 102
3/4" Dr. Impact Socket - 19mm/38x90
3/4" Dr. Impact Socket - 50mm/70x95
3/4" Dr. Impact Socket - 21mm/48x90
3/4" Dr. Impact Socket - 22mm/48x90
3/4" Dr. Impact Socket - 23mm/48x90
3/4" Dr. Impact Socket - 24mm/48x90
3/4" Dr. Impact Socket - 26mm/48x90
3/4" Dr. Impact Socket - 27mm/48x90
3/4" Dr. Impact Socket - 30mm/39x90
3/4" Dr. Impact Socket - 32mm/45x90
3/4" Dr. Impact Socket - 33mm/48x90
3/4" Dr. Impact Socket - 34mm/50x90
3/4" Dr. Impact Socket - 36mm/52x90
3/4" Dr. Impact Socket - 38mm/54x90
3/4" Dr. Impact Socket - 41mm/60x90
3/4" Dr. Impact Socket - 46mm/66x95
DR34-SCKI-1990L
DR34-SCKI-2095L
DR34-SCKI-2190L
DR34-SCKI-2290L
DR34-SCKI-2390L
DR34-SCKI-2490L
DR34-SCKI-2690L
DR34-SCKI-2790L
DR34-SCKI-3090L
DR34-SCKI-3290L
DR34-SCKI-3390L
DR34-SCKI-3490L
DR34-SCKI-3690L
DR34-SCKI-3890L
DR34-SCKI-4190L
DR34-SCKI-4695L
Description Article Number
M3314 Page 102
1/2" Dr. Impact socket -
10mm/18x39/CR-MO
1/2" Dr. Impact socket -
12mm/20x39/CR-MO
1/2" Dr. Impact socket -
13mm/21x39/CR-MO
1/2" Dr. Impact socket -
14mm/22x39/CR-MO
1/2" Dr. Impact socket -
17mm/26x39/CR-MO
1/2" Dr. Impact socket -
17mm/26x78/CR-MO
1/2" Dr. Impact socket -
19mm/28x39/CR-MO
1/2" Dr. Impact socket -
19mm/28x78/CR-MO
1/2" Dr. Impact socket -
21mm/30x78/CR-MO
1/2" Dr. Impact socket -
22mm/32x39/CR-MO
1/2" Dr. Impact socket -
22mm/32x78/CR-MO
1/2" Dr. Impact socket -
24mm/34x39/CR-MO
1/2" Dr. Impact socket -
24mm/34x78/CR-MO
1/2" Dr. Impact socket -
27mm/38x78/CR-MO
DR12-SCKI-1039L
DR12-SCKI-1239L
DR12-SCKI-1339L
DR12-SCKI-1439L
DR12-SCKI-1739L
DR12-SCKI-1778L
DR12-SCKI-1939L
DR12-SCKI-1978L
DR12-SCKI-2178L
DR12-SCKI-2239L
DR12-SCKI-2278L
DR12-SCKI-2439L
DR12-SCKI-2478L
DR12-SCKI-2778L
Description Article Number
M2008 Page 111
Teeth Socket 24.5mm(C) for M2008
Installation Bar (12.5x21/150) for M2008
Removal Bar (12.5x62.5/135) for M2008
Thread Socket P2.5L/22.5-25.7mm(A)
for M2008
Thread Socket P2.5L/19.45-21.8mm(B)
for M2008
Teeth Socket 28mm(D) for M2008
Teeth Socket 19.5mm(A) for M2008
Teeth Socket 22.3mm(B) for M2008
NT1-SKTE-32T2560L
PBAR-1321L
PBAR-1363L
DR12-SKTH-25LT2638L
DR12-SKTH-25LT2238L
NT1-SKTE-32T2860L
NT1-SKTE-32T2060L
NT1-SKTE-32T2260L
Description Article Number
146
M3817 Page 115
Square - 3/8" x 8mm
Square - 3/8" x 9.5mm
Square - 3/8" x 10mm
Square - 3/8" x 10.5mm
Square - 3/8" x 11mm
Square - 3/8" x 12mm
Square - 3/8" x 13mm
Hex - 3/8" x 8mm
Hex - 3/8" x 9mm
Hex - 3/8" x 10mm
Hex - 3/8" x 12mm
Hex - 3/8" x 13mm
Hex - 3/8" x 14mm
Hex - 3/8" x 17mm
Star - 3/8" x 16mm
Square Hole - 3/8" x 10mm
Triangle - 3/8" x 10mm
DR38-ODPK-SQ08CV
DR38-ODPK-SQ09HCV
DR38-ODPK-SQ10CV
DR38-ODPK-SQ10HCV
DR38-ODPK-SQ11CV
DR38-ODPK-SQ12CV
DR38-ODPK-SQ13CV
DR38-ODPK-H8CV
DR38-ODPK-H9CV
DR38-ODPK-H10CV
DR38-ODPK-H12CV
DR38-ODPK-H13CV
DR38-ODPK-H14CV
DR38-ODPK-H17CV
DR38-ODPK-SP16CV
DR38-ODPK-XS10CV
DR38-ODPK-XT10CV
Description Article Number
Spare parts
M3234 Page 103
Impact Socket Adapter 3/4"F-1/2"M
for M3234
Impact Socket Adapter 1/2"F-3/4"M
for M3234
Impact Socket Adapter 3/8"F-1/2"M
for M3234
Impact Socket Adapter 1/2"F-3/8"M
for M3234
Impact Socket Adapter 1/4"F-3/8"M
for M3234
Impact Socket Adapter 3/8"F-1/4"M
for M3234
DR34-ADSI-12DRCRM
DR12-ADSI-34DRCRM
DR38-ADSI-12DRCRM
DR12-ADSI-38DRCRM
DR14-ADSI-38DRCRM
DR38-ADSI-14DRCRM
Description Article Number
M3414 Page 78
3/4" Dr. Extension Bar - 4"/100mm
3/4" Dr. Extension Bar - 8"/200mm
3/4" Dr. Sliding T-Bar - 450mm
3/4" Dr. Ratchet Handle - 24 Teeth/
Quick Release
3/4" Dr. Socket - 22mm/6P
3/4" Dr. Socket - 24mm/6P
3/4" Dr. Socket - 27mm/6P
3/4" Dr. Socket - 30mm/6P
3/4" Dr. Socket - 32mm/6P
3/4" Dr. Socket - 36mm/6P
3/4" Dr. Socket - 38mm/6P
3/4" Dr. Socket - 41mm/6P
3/4" Dr. Socket - 46mm/6P
3/4" Dr. Socket - 50mm/6P
DR34-BARE-100L
DR34-BARE-200L
DR34-BART-SL450L
DR34-HDRQ-24T
DR34-SCKT-6P2250L
DR34-SCKT-6P2451L
DR34-SCKT-6P2752L
DR34-SCKT-6P3053L
DR34-SCKT-6P3254L
DR34-SCKT-6P3658L
DR34-SCKT-6P3860L
DR34-SCKT-6P4164L
DR34-SCKT-6P4668L
DR34-SCKT-6P5072L
Description Article Number
M3852 Page 75
3-Way Adapter - 1/2"F x 3/8"M
3/8" Dr. Extension Bar - 6"/150mm
3/8" Dr. Extension Bar - 3"/75mm
3/8" Bit Socket - Hex/3mm
3/8" Bit Socket - Hex/4mm
3/8" Bit Socket - Hex/5mm
3/8" Bit Socket - Hex/6mm
3/8" Bit Socket - Hex/7mm
3/8" Bit Socket - Hex/8mm
3/8" Bit Socket - Hex/10mm
3/8" Bit Socket - Philips/#1
3/8" Bit Socket - Philips/#2
3/8" Bit Socket - Philips/#3
3/8" Bit Socket - Pozi/#1
3/8" Bit Socket - Pozi/#2
3/8" Bit Socket - Slotted/5.5mm
3/8" Bit Socket - Slotted/6.5mm
3/8" Bit Socket - Torx Tamperproof/T10
3/8" Bit Socket - Torx Tamperproof/T15
3/8" Bit Socket - Torx Tamperproof/T20
3/8" Bit Socket - Torx Tamperproof/T25
3/8" Bit Socket - Torx Tamperproof/T30
3/8" Bit Socket - Torx Tamperproof/T40
3/8" Bit Socket - Torx Tamperproof/T45
3/8" Bit Socket - Torx Tamperproof/T50
3/8" Bit Socket - Torx Tamperproof/T55
3/8" Dr. Ratchet Handle - 72 Teeth/
Quick release
3/8" Dr. Universal Joint
3/8" Dr. Deep Socket - 10mm/6P
3/8" Dr. Deep Socket - 12mm/6P
3/8" Dr. Deep Socket - 13mm/6P
3/8" Dr. Deep Socket - 15mm/6P
3/8" Dr. Deep Socket - 17mm/6P
3/8" Dr. Socket - 6mm/6P
3/8" Dr. Socket - 7mm/6P
3/8" Dr. Socket - 8mm/6P
3/8" Dr. Socket - 9mm/6P
3/8" Dr. Socket - 10mm/6P
3/8" Dr. Socket - 11mm/6P
3/8" Dr. Socket - 12mm/6P
3/8" Dr. Socket - 13mm/6P
3/8" Dr. Socket - 14mm/6P
3/8" Dr. Socket - 15mm/6P
3/8" Dr. Socket - 16mm/6P
3/8" Dr. Socket - 17mm/6P
3/8" Dr. Socket - 18mm/6P
3/8" Dr. Socket - 19mm/6P
3/8" Dr. Socket - 20mm/6P
3/8" Dr. Socket - 21mm/6P
3/8" Dr. Socket - 22mm/6P
3/8" Dr. Spark Plug Socket - 16mm
3/8" Dr. Spark Plug Socket - 21mm
DR12-AD3W-38M40L
DR38-BARE-150L
DR38-BARE-75L
DR38-BISK-H0348L
DR38-BISK-H0448L
DR38-BISK-H0548L
DR38-BISK-H0648L
DR38-BISK-H0748L
DR38-BISK-H0848L
DR38-BISK-H1048L
DR38-BISK-PH0148L
DR38-BISK-PH0248L
DR38-BISK-PH0348L
DR38-BISK-PZ0148L
DR38-BISK-PZ0248L
DR38-BISK-S05H48L
DR38-BISK-S06H48L
DR38-BISK-TT1048L
DR38-BISK-TT1548L
DR38-BISK-TT2048L
DR38-BISK-TT2548L
DR38-BISK-TT3048L
DR38-BISK-TT4048L
DR38-BISK-TT4548L
DR38-BISK-TT5048L
DR38-BISK-TT5548L
M0136, M0380,
M0381
DR38-JTUN-58L
DR38-SCKD-6P1062L
DR38-SCKD-6P1262L
DR38-SCKD-6P1362L
DR38-SCKD-6P1562L
DR38-SCKD-6P1762L
DR38-SCKT-6P0628L
DR38-SCKT-6P0728L
DR38-SCKT-6P0828L
DR38-SCKT-6P0928L
DR38-SCKT-6P1028L
DR38-SCKT-6P1128L
DR38-SCKT-6P1228L
DR38-SCKT-6P1328L
DR38-SCKT-6P1428L
DR38-SCKT-6P1528L
DR38-SCKT-6P1628L
DR38-SCKT-6P1730L
DR38-SCKT-6P1830L
DR38-SCKT-6P1930L
DR38-SCKT-6P2030L
DR38-SCKT-6P2130L
DR38-SCKT-6P2230L
DR38-SCSP-6P1665L
DR38-SCSP-6P2165L
Description Article Number
M3591 Page 64
Wooden Top Plate M3500-MDF01
Description Article Number
147
M9516 Page 114
Chisel 3/4" x 7" x1/2"
Chisel 5/8" x 6-1/2" x 12mm
Chisel 1/2" x 6" x 11mm
Chisel 3/8" x 6-1/2" x 8mm
Center Punch 1/8" x 5" x 8mm
Center Punch 3/16" x 6" x 11mm
Pin Punch 1/4" x 5-3/4" x 11mm
Pin Punch 3/16" x 5-1/4" x 3/8"
Pin Punch 5/32" x 5" x 3/8"
Pin Punch 1/8" x 4-3/4" x 8mm
Pin Punch 3/32" x 4-1/4" x 1/4"
Taper Punch 3/32" x 5-1/4" x 8mm
Taper Punch 1/8" x 5-3/4" x 3/8"
Taper Punch 5/32" x 6" x 3/8"
Taper Punch 3/16" x 6-1/4" x 11mm
Taper Punch 1/4" x 6-3/4" x 12mm
PCHS-19178L
PCHS-16165L
PCHS-13152L
PCHS-9H165L
PCNT-03127L
PCNT-05152L
PPIN-6H19L
PPIN-05133L
PPIN-04177L
PPIN-03121L
PPIN-2H108L
PTAP-2H133L
PTAP-03146L
PTAP-04152L
PTAP-05159L
PTAP-6H171H
Description Article Number
IJS6000 Page 126
Accu 300/600/6000 for IJS6000
Jump Start Cable EC5/10 for IJS6000
Color Box for IJS6000
Full manual for IJS6000 serial &
IJS11000 serial
USB cable 3 in 1 i3/i5/mUSB
EVA Case for IJS6000/8000 serial
Power Adaptor cigarette/5V/2A for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/BS for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/EU for
IJS6000/8000 serial
IJSACU630
IJSEC510
IJSBX6EU
IJSMNU2015
IJSUSBi35m
IJSEVA6
IJSPSC5V2C
IJSPSU5V2BS
IJSPSU5V2EU
Description Article Number
IJS6000D Page 126
Accu 350/700/6000 for IJS6000D
Color Box for IJS6000D/BS
Color Box for IJS6000D
Jump Start Cable EC5/8 for
IJS6000D, IJS8000, IJS11000
USB cable 3 in 1 i3/i5/mUSB
EVA Case for IJS6000/8000 serial
Power Adaptor cigarette/5V/2A for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/BS for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/EU for
IJS6000/8000 serial
IJSACU635
IJSCBX6DBS
IJSBX6DEU
IJSEC508
IJSUSBi35m
IJSEVA6
IJSPSC5V2C
IJSPSU5V2BS
IJSPSU5V2EU
Description Article Number
Spare parts
U0705 Page 141
Gear set #1 for U0705 (blue)
Gear set #2 for U0705 (blue)
Gear set #3 for U0705 (blue)
Gear set #1 for U0705 (black)
Gear set #2 for U0705 (black)
Gear set #3 for U0705 (black)
Handle Crank for U0705
Handheld Remote Control for U0705
Electric Motor for U0705
Wall Mount Plate for U0705
Winch Cable Hook for U0705
Wire Harness assy for U0705
U0705-GS1
U0705-GS2
U0705-GS3
U0705-GS4
U0705-GS5
U0705-GS6
U0705-HC
U0705-HRC
U0705-MT
U0705-PL
U0705-WCH
U0705-WHA
Description Article Number
IJS8000 Page 128
Accu 370/740/8000 for IJS8000
Jump Start Cable EC5/8 for
IJS6000D, IJS8000, IJS11000
USB cable 3 in 1 i3/i5/mUSB
EVA Case for IJS6000/8000 serial
Power Adaptor cigarette/5V/2A for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/BS for
IJS6000/8000 serial
Power Adaptor USB/5V/2A/EU for
IJS6000/8000 serial
IJSACU837
IJSEC508
IJSUSBi35m
IJSEVA6
IJSPSC5V2C
IJSPSU5V2BS
IJSPSU5V2EU
Description Article Number
IJS11000 Page 127
Accu 400/800/11000 for IJS11000
EVA Case for IJS11000 serial
Power Adaptor 15V/1A/EU for IJS11000
Power Adaptor cigarette/12V/1A for
IJS11000
Color Box for IJS11000
Jump Start Cable EC5/8 for
IJS6000D, IJS8000, IJS11000
USB cable 3 in 1 i3/i5/mUSB
Full manual for IJS6000 serial &
IJS11000 serial
IJSACU114
IJSEVA11
IJSPSA15V1EU
IJSPSC12V1C
IJSCBX11EU
IJSEC508
IJSUSBi35m
IJSMNU2015
Description Article Number
148
Index
1
10500 8 + 910990 8 + 91102500 8 + 91104500 8 + 91106500 8 + 91108500 8 + 91112500 8 + 91112900 8 + 91120500 8 + 91120900 8 + 91412000 8 + 91420000 8 + 91430000 8 + 91202100 8 + 91204100 8 + 91730200 8 + 91820200 8 + 91820600 8 + 91850200 8 + 92 2102701 12 + 152103001 10 + 142119077 1402119080 1402119086 1402119087 1402119088 1402119089 14022101C 17 + 1822201 17 + 1822903 48 + 4922910 46 + 4723152 19 + 2423205 22 + 2523207 22 + 2523211 22 + 2523212 20 + 2423301C 23 + 2523501 23 + 2523991 23 + 2524113 21 + 2424213 21 + 2424301 23 + 2424601 23 + 24
2501503 13 + 152505700 16 + 182510700 16 + 182602701 11 + 142702701 11 + 1428045 13 + 152902301 12 + 152902401 10 + 142902501 12 + 152903011 11 + 152903101 10 + 142903201 12 + 152903501 10 + 142903701 11 + 143 31000 38 + 393203100 28 + 303203500 28 + 303203900 29 + 303206100 28 + 303206500 28 + 303207500 29 + 303210901 29 + 303212100 28 + 303212500 28 + 303220100 28 + 303222500 29 + 304 41000C 32 + 3341001 32 + 3341100C 32 + 3341901 314200000 32 + 3342001 32 + 3343000 3344012 35 + 3744017 35 + 3744018 35 + 3744020 36 + 3744943 3644947 3644949 3644980 3646030 3146060 31
46100 3147020 45 + 4747053 46 + 475 50040 3450100 3455040 48 + 4955049 48 + 4955100 48 + 4955109 48 + 496
60253 42 + 4361015 4061025 4061030 4061050 4061154 40 + 4161204 40 + 4161304 40 + 4161504 40 + 4165124 42 + 436615000 447 71055 48 + 4971105 48 + 499 90068 38 + 3990150 35 + 3690165 38 + 3990250 46 + 479210000 44A A1000 58
AMP120310 112AMP120315 112AMP120720 112AMP120725 112AMP121230 112AMP121235 112AMP121240 112AMP121550 112AMP221102 113AMP221103 113AMP221110 113
AMP230110 112AMP230410 112AMP230710 112AMP230810 112AMP320202 113AMP320303 113AMP321004 113AMPC230110 112AMPC230410 112AMPC230710 112APS1202 113APS1203 113APS1204 113B B0200 52B0400 52B0600 52C C1001 58C-9802 129C-9803 129C-9806 129C-9836 131CP4031 130CP5031 130CP6031 130CP7031 130CP9605 131F F2000 53 + 55F2000 B 53 F5210 53 + 55F7670 53 + 55G G1250 54 + 55G2000 54 + 55G2250 54 + 55G3003 54 + 55H HR8000 118HRD70 134HRD100 134HRK8007 119HRP42 135HRP100 135
HS7000 120HSS7006M 120HSS7006S 120HSS7006Z 120HSS7008S 120HSS7008V 120HSS7008Z 120I I-7015 128IJS6000 126IJS6000D 126IJS8000 128IJS11000 127M M0001 115M0003 86M0006 71M0012 70M0013 70M0017 73M0023 68M0027 69M0029 69M0032 110M0034 85M0043 85M0048 69M0060 110M0078 73M0105 80M0119 83M0121 86M0122 86M0127 68M0138 110M0141 86M0142 86M030N 96M0381 86M0382 86 M110N 96M1000N 96M1208 84M1210 84
149
Index
M1217 103M1219 97M1228 78M1234 84M1256 82M1297 77M1395 76M1401 139M1443 74M1500 81M1500N 97M1700 115 M2008 111M2012 70M2016 100M2020 111M2033 101M2034 100M2038 101M2041 101M2042 101M2060 98M2062 99M2063 98M2064 98M2072 99M210N 96M2212 96M2214 96M2238 96M2305 88M2308 88M2312 88M2339 90M2402 87M2405 89M2408 89M2412 89M2435 85M2502 91M2560 91M2562 91M2563 91
M3203 108M3205 106M3206 105M3211 103M3215 109M3232 107M3234 103M3306 103M3314 102M3316 102M3322 102M3350 65M3379 65M3397 65 + 66M3414 78M3424 97M3500-MDF02 62M3531 62M3591 64M3593 64 + 66M3760 63M3770 63 + 66M3808 106M3817 115M3852 75 M500N 96M5001 116M5713 79 M7320 97M7580 87M7583 87M7584 87M7585 87M7586 87M7587 87M7588 87M7589 87M7591 87M7592 87M7593 87M7594 87M7596 87M7597 87
M7598 87M7599 87M7808 87M7809 87M7810 87M7811 87M7812 87M7813 87M7814 87M7815 87M7816 87M7817 87M7818 87M7819 87
M8000 73M8011 73M8015 79M8104 70M8107 72M8203 71M8204 71M8207 72M8304 71M8306 72M8308 72 M9004 116M9009 114M9036 116M9048 116M9056 116M9104 90M9304 92M9305 94M9306 94M9307 95M9308 94M9383 95M9393 95M9402 93M9403 93M9404 93M9405 93M9406 93
M9409 105M9410 92M9411 92M9414 111M9416 91M9438 92M9455 92M9506 114M9516 114M9703 106M9706 105M9711 105M9737 104M9807 121M9900 117M9901 117M9907 121M9911 117M9916 121M9922 117M9924 121M9930 117M9999 122M9999-03 122M9999-04 122M9999-S 122
MD02 66MD12 66MD15 67P P0501 59PA-01 139PA-02 139PL-1001B 136PL-1001G 136PL-1001O 136PL-1007 136PL-1016 137PL-1200C 137PL-2300 136PL-514 137PL-530 137PO-08 138PO-10 138
PO-16 138PO-44 138R RS-9833 131S
S0501T 31 + 59SB001B 26SB001Y 26SB002B 26SB002Y 26SP44410 27SP55415 27SP66420 27SP66625 27SP1010650 27SW001B 26SW002B 26T T2002 56T3003 56T3004 56T5350B 57TI-00001 133TI-00003 133TI-10711 132TI-10721 132TI-11221 132TI-11224 133U U0705 141W W2001 139
150
---PRESS RELEASE---
Omega Mechanix new sponsor of United Autosports
Roosendaal, The Netherlands
Omega Mechanix is one of the sponsors of United Autosports for 2016 and 2017. United Autosports is a well-known GT and sports car team, based in Leeds, West Yorkshire, UK. This year United Autosports are making their debut in the European Le Mans Series. To improve the brand awareness, the logo and the brand name of Omega Mechanix will appear on the Ligier JS P3 cars. In addition, Omega Mechanix also sponsors the GT Cup.
United AutosportsUnited Autosports was founded in 2009 by businessman Zak Brown and racing driver Richard Dean. United Auto-sports have raced in a number of different championships, with a vast range of cars and drivers. United Autosports are hugely experienced in racing in the UK and Europe, as well as worldwide, having entered events in Asia, Australia and America.
151
Shinn Fu Europe“Omega Hydraulics and Omega Mechanix’ workshop tools has a market leading range of workshop hydraulics equipment which is tried, tested and used by thousands of car and commercial workshops in the UK, along with hundreds of leading Fast Fit locations”, United Autosports said. United Autosports sees Omega Hydraulics and Omega Mechanix as quality brands.
EventsThe European Le Mans Series serves as the leading championship for endurance racing in Europe. The champion-ship visits seven of the top race circuits in Europe for a two-day event, culminating in a four-hour race. Each event provides plenty of entertainment for the thousands of spectators that attend.For remaining races check the website of United Autosports: www.unitedautosports.com
---End of Release---
ContactFor more information about this sponsorship, please contact:
Shinn Fu Europe Munnikenheiweg 50 4879 NG Etten-Leur The Netherlands Tel.: +31 (0)165 583 300 sales@sfeu.nl
GLOBAL LOCATIONSwww.shinnfu.com
EUROPE, AFRICA & MIDDLE EASTMunnikenheiweg 50 4879 NG Etten-LeurThe NetherlandsTel.: +31 (0)165-583300Fax: +31 (0)165-583310Email: sales@sfeu.nl
AUSTRALIA & PACIFIC15 Viewtech PlaceRowville 3178, Victoria AustraliaTel.: +61 3 9755-8277Fax: +61 3 9755-8219Email: sales@shinnfuaustralia.com
ASIA7F., NO. 408 Ruei Guang RoadNei Hu District, Tapei City 114Taiwan R.O.C.Tel.: +886 2 8751-7888Fax: +886 2 8751-7999Email: sales@shinnfu.com
CHINA3950 Hu Min Road201108, ShanghaiChinaTel.: +86 21 64891469Fax: +86 21 64891465Email: sales@shinnfu.com
USA, CANADA, MEXICO, CENTRAL & SOUTH AMERICA10939 N. Pomona Ave.Kansas City, MO 64153Tel.: +888 332 6419, +816 891 6390Fax: 816 891 6599Email: sales@omegalift.com
version 2017-04